/* * Copyright (c) 1993 Herb Peyerl * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. The name of the author may not be used to endorse or promote products * derived from this software withough specific prior written permission * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * * From: if_ep.c,v 1.9 1994/01/25 10:46:29 deraadt Exp $ * $Id: if_ep.c,v 1.7 1994/02/03 11:51:06 davidg Exp $ */ /* * TODO: * Multi-509 configs. * don't pass unit into epstop. * epintr returns an int for magnum. 0=not for me. 1=for me. -1=whoknows? * deallocate mbufs when ifconfig'd down. */ #include "ep.h" #if NEP > 0 #include "bpfilter.h" #include "sys/param.h" #if defined(__FreeBSD__) #include "sys/systm.h" #include "sys/kernel.h" #endif #include "sys/mbuf.h" #include "sys/socket.h" #include "sys/ioctl.h" #include "sys/errno.h" #include "sys/syslog.h" #if defined(__NetBSD__) #include "sys/select.h" #endif #include "net/if.h" #include "net/if_dl.h" #include "net/if_types.h" #ifdef INET #include "netinet/in.h" #include "netinet/in_systm.h" #include "netinet/in_var.h" #include "netinet/ip.h" #include "netinet/if_ether.h" #endif #ifdef NS #include "netns/ns.h" #include "netns/ns_if.h" #endif #if NBPFILTER > 0 #include "net/bpf.h" #include "net/bpfdesc.h" #endif #include "machine/pio.h" #include "i386/isa/isa.h" #include "i386/isa/isa_device.h" #include "i386/isa/icu.h" #include "i386/isa/if_epreg.h" #define ETHER_MIN_LEN 64 #define ETHER_MAX_LEN 1518 #define ETHER_ADDR_LEN 6 /* * Ethernet software status per interface. */ struct ep_softc { struct arpcom arpcom; /* Ethernet common part */ short ep_io_addr; /* i/o bus address */ char ep_connectors; /* Connectors on this card. */ #define MAX_MBS 4 /* # of mbufs we keep around */ struct mbuf *mb[MAX_MBS]; /* spare mbuf storage. */ int next_mb; /* Which mbuf to use next. */ int last_mb; /* Last mbuf. */ int tx_start_thresh; /* Current TX_start_thresh. */ caddr_t bpf; /* BPF "magic cookie" */ } ep_softc[NEP]; static int epprobe __P((struct isa_device *)); static int epattach __P((struct isa_device *)); static int epioctl __P((struct ifnet * ifp, int, caddr_t)); void epinit __P((int)); void epintr __P((int)); void epmbufqueue __P((caddr_t, int)); void epread __P((struct ep_softc *)); void epreset __P((int)); void epstart __P((struct ifnet *)); void epstop __P((int)); void epwatchdog __P((int)); struct isa_driver epdriver = { epprobe, epattach, "ep" }; static int send_ID_sequence __P((u_short)); static u_short get_eeprom_data __P((int, int)); static int is_eeprom_busy __P((struct isa_device *)); /* * Rudimentary support for multiple cards is here but is not * currently handled. In the future we will have to add code * for tagging the cards for later activation. We wanna do something * about the id_port. We're limited due to current config procedure. * Magnum config holds promise of a fix but we'll have to wait a bit. */ int epprobe(is) struct isa_device *is; { struct ep_softc *sc = &ep_softc[is->id_unit]; u_short k; int id_port = 0x100; /* XXX */ outw(BASE + EP_COMMAND, GLOBAL_RESET); DELAY(1000); outb(id_port, 0xc0); /* Global reset to id_port. */ DELAY(1000); send_ID_sequence(id_port); DELAY(1000); /* * MFG_ID should have 0x6d50. * PROD_ID should be 0x9[0-f]50 */ k = get_eeprom_data(id_port, EEPROM_MFG_ID); if (k != MFG_ID) return (0); k = get_eeprom_data(id_port, EEPROM_PROD_ID); if ((k & 0xf0ff) != (PROD_ID & 0xf0ff)) return (0); k = get_eeprom_data(id_port, EEPROM_ADDR_CFG); /* get addr cfg */ k = (k & 0x1f) * 0x10 + 0x200; /* decode base addr. */ if (k != (u_short)is->id_iobase) return (0); k = get_eeprom_data(id_port, EEPROM_RESOURCE_CFG); k >>= 12; if (is->id_irq != (1 << ((k == 2) ? 9 : k))) return (0); outb(id_port, ACTIVATE_ADAPTER_TO_CONFIG); return (0x10); /* 16 bytes of I/O space used. */ } static int epattach(is) struct isa_device *is; { struct ep_softc *sc = &ep_softc[is->id_unit]; struct ifnet *ifp = &sc->arpcom.ac_if; u_short i; struct ifaddr *ifa; struct sockaddr_dl *sdl; sc->ep_io_addr = is->id_iobase; printf("ep%d: ", is->id_unit); sc->ep_connectors = 0; i = inw(is->id_iobase + EP_W0_CONFIG_CTRL); if (i & IS_AUI) { printf("aui"); sc->ep_connectors |= AUI; } if (i & IS_BNC) { if (sc->ep_connectors) printf("/"); printf("bnc"); sc->ep_connectors |= BNC; } if (i & IS_UTP) { if (sc->ep_connectors) printf("/"); printf("utp"); sc->ep_connectors |= UTP; } if (!sc->ep_connectors) printf("no connectors!"); /* * Read the station address from the eeprom */ for (i = 0; i < 3; i++) { u_short *p; GO_WINDOW(0); if (is_eeprom_busy(is)) return(0); outw(BASE + EP_W0_EEPROM_COMMAND, READ_EEPROM | i); if (is_eeprom_busy(is)) return(0); p =(u_short *)&sc->arpcom.ac_enaddr[i*2]; *p = htons(inw(BASE + EP_W0_EEPROM_DATA)); GO_WINDOW(2); outw(BASE + EP_W2_ADDR_0 + (i * 2), ntohs(*p)); } printf(" address %s\n", ether_sprintf(sc->arpcom.ac_enaddr)); ifp->if_unit = is->id_unit; ifp->if_name = "ep"; ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS; ifp->if_init = epinit; ifp->if_output = ether_output; ifp->if_start = epstart; ifp->if_ioctl = epioctl; ifp->if_watchdog = epwatchdog; if_attach(ifp); /* * Fill the hardware address into ifa_addr if we find an * AF_LINK entry. We need to do this so bpf's can get the hardware * addr of this card. netstat likes this too! */ ifa = ifp->if_addrlist; while ((ifa != 0) && (ifa->ifa_addr != 0) && (ifa->ifa_addr->sa_family != AF_LINK)) ifa = ifa->ifa_next; if ((ifa != 0) && (ifa->ifa_addr != 0)) { sdl = (struct sockaddr_dl *) ifa->ifa_addr; sdl->sdl_type = IFT_ETHER; sdl->sdl_alen = ETHER_ADDR_LEN; sdl->sdl_slen = 0; bcopy(sc->arpcom.ac_enaddr, LLADDR(sdl), ETHER_ADDR_LEN); } #if NBPFILTER > 0 bpfattach(&sc->bpf, ifp, DLT_EN10MB, sizeof(struct ether_header)); #endif return 1; } /* * The order in here seems important. Otherwise we may not receive * interrupts. ?! */ void epinit(unit) int unit; { register struct ep_softc *sc = &ep_softc[unit]; register struct ifnet *ifp = &sc->arpcom.ac_if; int s, i; if (ifp->if_addrlist == (struct ifaddr *) 0) return; s = splimp(); while (inb(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS) ; GO_WINDOW(0); /* Disable the card */ outw(BASE + EP_W0_CONFIG_CTRL, 0); /* Enable the card */ outw(BASE + EP_W0_CONFIG_CTRL, ENABLE_DRQ_IRQ); GO_WINDOW(2); /* Reload the ether_addr. */ for (i = 0; i < 6; i++) outb(BASE + EP_W2_ADDR_0 + i, sc->arpcom.ac_enaddr[i]); outw(BASE + EP_COMMAND, RX_RESET); outw(BASE + EP_COMMAND, TX_RESET); /* Window 1 is operating window */ GO_WINDOW(1); for (i = 0; i < 31; i++) inb(BASE + EP_W1_TX_STATUS); /* get rid of stray intr's */ outw(BASE + EP_COMMAND, ACK_INTR | 0xff); outw(BASE + EP_COMMAND, SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL); outw(BASE + EP_COMMAND, SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL); outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL | FIL_GROUP | FIL_BRDCST); /* * you can `ifconfig (link0|-link0) ep0' to get the following * behaviour: * -link0 disable AUI/UTP. enable BNC. * link0 disable BNC. enable AUI. if the card has a UTP * connector, that is enabled too. not sure, but it * seems you have to be careful to not plug things * into both AUI & UTP. */ #if defined(__NetBSD__) if (!(ifp->if_flags & IFF_LINK0) && (sc->ep_connectors & BNC)) { #else if (!(ifp->if_flags & IFF_ALTPHYS) && (sc->ep_connectors & BNC)) { #endif outw(BASE + EP_COMMAND, START_TRANSCEIVER); DELAY(1000); } #if defined(__NetBSD__) if ((ifp->if_flags & IFF_LINK0) && (sc->ep_connectors & UTP)) { #else if ((ifp->if_flags & IFF_ALTPHYS) && (sc->ep_connectors & UTP)) { #endif GO_WINDOW(4); outw(BASE + EP_W4_MEDIA_TYPE, ENABLE_UTP); GO_WINDOW(1); } outw(BASE + EP_COMMAND, RX_ENABLE); outw(BASE + EP_COMMAND, TX_ENABLE); ifp->if_flags |= IFF_RUNNING; ifp->if_flags &= ~IFF_OACTIVE; /* just in case */ sc->tx_start_thresh = 20; /* probably a good starting point. */ /* * Store up a bunch of mbuf's for use later. (MAX_MBS). First we * free up any that we had in case we're being called from intr or * somewhere else. */ sc->last_mb = 0; sc->next_mb = 0; epmbufqueue((caddr_t)sc, 0); epstart(ifp); splx(s); } static const char padmap[] = {0, 3, 2, 1}; void epstart(ifp) struct ifnet *ifp; { register struct ep_softc *sc = &ep_softc[ifp->if_unit]; struct mbuf *m, *top; int s, len, pad; s = splimp(); if (sc->arpcom.ac_if.if_flags & IFF_OACTIVE) { splx(s); return; } startagain: /* Sneak a peek at the next packet */ m = sc->arpcom.ac_if.if_snd.ifq_head; if (m == 0) { splx(s); return; } #if 0 len = m->m_pkthdr.len; #else for (len = 0, top = m; m; m = m->m_next) len += m->m_len; #endif pad = padmap[len & 3]; /* * The 3c509 automatically pads short packets to minimum ethernet * length, but we drop packets that are too large. Perhaps we should * truncate them instead? */ if (len + pad > ETHER_MAX_LEN) { /* packet is obviously too large: toss it */ ++sc->arpcom.ac_if.if_oerrors; IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, m); m_freem(m); goto readcheck; } if (inw(BASE + EP_W1_FREE_TX) < len + pad + 4) { /* no room in FIFO */ outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | (len + pad + 4)); sc->arpcom.ac_if.if_flags |= IFF_OACTIVE; splx(s); return; } IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, m); if (m == 0) { /* not really needed */ splx(s); return; } outw(BASE + EP_COMMAND, SET_TX_START_THRESH | (len / 4 + sc->tx_start_thresh)); outw(BASE + EP_W1_TX_PIO_WR_1, len); outw(BASE + EP_W1_TX_PIO_WR_1, 0xffff); /* Second dword meaningless */ for (top = m; m != 0; m = m->m_next) { outsw(BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t), m->m_len/2); if (m->m_len & 1) outb(BASE + EP_W1_TX_PIO_WR_1, *(mtod(m, caddr_t) + m->m_len - 1)); } while (pad--) outb(BASE + EP_W1_TX_PIO_WR_1, 0); /* Padding */ #if NBPFILTER > 0 if (sc->bpf) { u_short etype; int off, datasize, resid; struct ether_header *eh; struct trailer_header { u_short ether_type; u_short ether_residual; } trailer_header; char ether_packet[ETHER_MAX_LEN]; char *ep; ep = ether_packet; /* * We handle trailers below: * Copy ether header first, then residual data, * then data. Put all this in a temporary buffer * 'ether_packet' and send off to bpf. Since the * system has generated this packet, we assume * that all of the offsets in the packet are * correct; if they're not, the system will almost * certainly crash in m_copydata. * We make no assumptions about how the data is * arranged in the mbuf chain (i.e. how much * data is in each mbuf, if mbuf clusters are * used, etc.), which is why we use m_copydata * to get the ether header rather than assume * that this is located in the first mbuf. */ /* copy ether header */ m_copydata(top, 0, sizeof(struct ether_header), ep); eh = (struct ether_header *) ep; ep += sizeof(struct ether_header); eh->ether_type = etype = ntohs(eh->ether_type); if (etype >= ETHERTYPE_TRAIL && etype < ETHERTYPE_TRAIL + ETHERTYPE_NTRAILER) { datasize = ((etype - ETHERTYPE_TRAIL) << 9); off = datasize + sizeof(struct ether_header); /* copy trailer_header into a data structure */ m_copydata(top, off, sizeof(struct trailer_header), (caddr_t)&trailer_header.ether_type); /* copy residual data */ resid = trailer_header.ether_residual - sizeof(struct trailer_header); resid = ntohs(resid); m_copydata(top, off + sizeof(struct trailer_header), resid, ep); ep += resid; /* copy data */ m_copydata(top, sizeof(struct ether_header), datasize, ep); ep += datasize; /* restore original ether packet type */ eh->ether_type = trailer_header.ether_type; bpf_tap(sc->bpf, ether_packet, ep - ether_packet); } else bpf_mtap(sc->bpf, top); } #endif m_freem(top); ++sc->arpcom.ac_if.if_opackets; /* * Is another packet coming in? We don't want to overflow the * tiny RX fifo. */ readcheck: if (inw(BASE + EP_W1_RX_STATUS) & RX_BYTES_MASK) { splx(s); return; } goto startagain; } void epintr(unit) int unit; { int status, i; register struct ep_softc *sc = &ep_softc[unit]; struct ifnet *ifp = &sc->arpcom.ac_if; struct mbuf *m; status = 0; checkintr: status = inw(BASE + EP_STATUS) & (S_TX_COMPLETE | S_TX_AVAIL | S_RX_COMPLETE | S_CARD_FAILURE); if (status == 0) { /* No interrupts. */ outw(BASE + EP_COMMAND, C_INTR_LATCH); return; } /* important that we do this first. */ outw(BASE + EP_COMMAND, ACK_INTR | status); if (status & S_TX_AVAIL) { status &= ~S_TX_AVAIL; inw(BASE + EP_W1_FREE_TX); sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE; epstart(&sc->arpcom.ac_if); } if (status & S_RX_COMPLETE) { status &= ~S_RX_COMPLETE; epread(sc); } if (status & S_CARD_FAILURE) { printf("ep%d: reset (status: %x)\n", unit, status); outw(BASE + EP_COMMAND, C_INTR_LATCH); epinit(unit); return; } if (status & S_TX_COMPLETE) { status &= ~S_TX_COMPLETE; /* * We need to read TX_STATUS until we get a 0 status in * order to turn off the interrupt flag. */ while ((i = inb(BASE + EP_W1_TX_STATUS)) & TXS_COMPLETE) { outw(BASE + EP_W1_TX_STATUS, 0x0); if (i & (TXS_MAX_COLLISION | TXS_JABBER | TXS_UNDERRUN)) { if (i & TXS_MAX_COLLISION) ++sc->arpcom.ac_if.if_collisions; if (i & (TXS_JABBER | TXS_UNDERRUN)) { outw(BASE + EP_COMMAND, TX_RESET); if (i & TXS_UNDERRUN) { if (sc->tx_start_thresh < ETHER_MAX_LEN) { sc->tx_start_thresh += 20; outw(BASE + EP_COMMAND, SET_TX_START_THRESH | sc->tx_start_thresh); } } } outw(BASE + EP_COMMAND, TX_ENABLE); ++sc->arpcom.ac_if.if_oerrors; } } epstart(ifp); } goto checkintr; } void epread(sc) register struct ep_softc *sc; { struct ether_header *eh; struct mbuf *mcur, *m, *m0, *top; int totlen, lenthisone; int save_totlen; u_short etype; int off, resid; int count, spinwait; int i; totlen = inw(BASE + EP_W1_RX_STATUS); off = 0; top = 0; if (totlen & ERR_RX) { ++sc->arpcom.ac_if.if_ierrors; goto out; } save_totlen = totlen &= RX_BYTES_MASK; /* Lower 11 bits = RX bytes. */ m = sc->mb[sc->next_mb]; sc->mb[sc->next_mb] = 0; if (m == 0) { MGETHDR(m, M_DONTWAIT, MT_DATA); if (m == 0) goto out; } else { /* Convert one of our saved mbuf's */ sc->next_mb = (sc->next_mb + 1) % MAX_MBS; m->m_data = m->m_pktdat; m->m_flags = M_PKTHDR; } top = m0 = m; /* We assign top so we can "goto out" */ #define EROUND ((sizeof(struct ether_header) + 3) & ~3) #define EOFF (EROUND - sizeof(struct ether_header)) m0->m_data += EOFF; /* Read what should be the header. */ insw(BASE + EP_W1_RX_PIO_RD_1, mtod(m0, caddr_t), sizeof(struct ether_header) / 2); m->m_len = sizeof(struct ether_header); totlen -= sizeof(struct ether_header); /* * mostly deal with trailer here. (untested) * We do this in a couple of parts. First we check for a trailer, if * we have one we convert the mbuf back to a regular mbuf and set the offset and * subtract sizeof(struct ether_header) from the pktlen. * After we've read the packet off the interface (all except for the trailer * header, we then get a header mbuf, read the trailer into it, and fix up * the mbuf pointer chain. */ eh = mtod(m, struct ether_header *); eh->ether_type = etype = ntohs((u_short) eh->ether_type); if (etype >= ETHERTYPE_TRAIL && etype < ETHERTYPE_TRAIL + ETHERTYPE_NTRAILER) { m->m_data = m->m_dat; /* Convert back to regular mbuf. */ m->m_flags = 0; /* This sucks but non-trailers are the norm */ off = (etype - ETHERTYPE_TRAIL) * 512; if (off >= ETHERMTU) { m_freem(m); return; /* sanity */ } totlen -= sizeof(struct ether_header); /* We don't read the trailer */ m->m_data += 2 * sizeof(u_short); /* Get rid of type & len */ } while (totlen > 0) { lenthisone = min(totlen, M_TRAILINGSPACE(m)); if (lenthisone == 0) { /* no room in this one */ mcur = m; m = sc->mb[sc->next_mb]; sc->mb[sc->next_mb] = 0; if (!m) { MGET(m, M_DONTWAIT, MT_DATA); if (m == 0) goto out; } else { timeout(epmbufqueue, (caddr_t)sc, 0); sc->next_mb = (sc->next_mb + 1) % MAX_MBS; } if (totlen >= MINCLSIZE) MCLGET(m, M_DONTWAIT); m->m_len = 0; mcur->m_next = m; lenthisone = min(totlen, M_TRAILINGSPACE(m)); } insw(BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len, lenthisone / 2); m->m_len += lenthisone; if (lenthisone & 1) *(mtod(m, caddr_t) + m->m_len - 1) = inb(BASE + EP_W1_RX_PIO_RD_1); totlen -= lenthisone; } if (off) { top = sc->mb[sc->next_mb]; sc->mb[sc->next_mb] = 0; if (top == 0) { MGETHDR(m, M_DONTWAIT, MT_DATA); if (top == 0) goto out; } else { /* Convert one of our saved mbuf's */ sc->next_mb = (sc->next_mb + 1) % MAX_MBS; top->m_data = top->m_pktdat; top->m_flags = M_PKTHDR; } insw(BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len, sizeof(struct ether_header)); top->m_next = m0; top->m_len = sizeof(struct ether_header); /* XXX Accomodate for type and len from beginning of trailer */ top->m_pkthdr.len = save_totlen - (2 * sizeof(u_short)); } else { top = m0; top->m_pkthdr.len = save_totlen; } top->m_pkthdr.rcvif = &sc->arpcom.ac_if; outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK); while (inb(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS) ; ++sc->arpcom.ac_if.if_ipackets; #if NBPFILTER > 0 if (sc->bpf) { bpf_mtap(sc->bpf, top); /* * Note that the interface cannot be in promiscuous mode if * there are no BPF listeners. And if we are in promiscuous * mode, we have to check if this packet is really ours. */ if ((sc->arpcom.ac_if.if_flags & IFF_PROMISC) && (eh->ether_dhost[0] & 1) == 0 && bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr, sizeof(eh->ether_dhost)) != 0 && bcmp(eh->ether_dhost, etherbroadcastaddr, sizeof(eh->ether_dhost)) != 0) { m_freem(top); return; } } #endif m_adj(top, sizeof(struct ether_header)); ether_input(&sc->arpcom.ac_if, eh, top); return; out: outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK); while (inb(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS) ; if (top) m_freem(top); return; } /* * Look familiar? */ static int epioctl(ifp, cmd, data) register struct ifnet *ifp; int cmd; caddr_t data; { register struct ifaddr *ifa = (struct ifaddr *) data; struct ep_softc *sc = &ep_softc[ifp->if_unit]; struct ifreq *ifr = (struct ifreq *) data; int s, error = 0; switch (cmd) { case SIOCSIFADDR: ifp->if_flags |= IFF_UP; switch (ifa->ifa_addr->sa_family) { #ifdef INET case AF_INET: epinit(ifp->if_unit); /* before arpwhohas */ ((struct arpcom *) ifp)->ac_ipaddr = IA_SIN(ifa)->sin_addr; arpwhohas((struct arpcom *) ifp, &IA_SIN(ifa)->sin_addr); break; #endif #ifdef NS case AF_NS: { register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr); if (ns_nullhost(*ina)) ina->x_host = *(union ns_host *)(sc->arpcom.ac_enaddr); else { ifp->if_flags &= ~IFF_RUNNING; bcopy((caddr_t) ina->x_host.c_host, (caddr_t)sc->arpcom.ac_enaddr, sizeof(sc->arpcom.ac_enaddr)); } epinit(ifp->if_unit); break; } #endif default: epinit(ifp->if_unit); break; } break; case SIOCSIFFLAGS: if ((ifp->if_flags & IFF_UP) == 0 && ifp->if_flags & IFF_RUNNING) { ifp->if_flags &= ~IFF_RUNNING; epstop(ifp->if_unit); break; } if (ifp->if_flags & IFF_UP && (ifp->if_flags & IFF_RUNNING) == 0) epinit(ifp->if_unit); break; #ifdef notdef case SIOCGHWADDR: bcopy((caddr_t) sc->sc_addr, (caddr_t) &ifr->ifr_data, sizeof(sc->sc_addr)); break; #endif default: error = EINVAL; } return (error); } void epreset(unit) int unit; { int s = splimp(); epstop(unit); epinit(unit); splx(s); return; } void epwatchdog(unit) int unit; { struct ep_softc *sc = &ep_softc[unit]; log(LOG_ERR, "ep%d: watchdog\n", unit); ++sc->arpcom.ac_if.if_oerrors; epreset(unit); } void epstop(unit) int unit; { struct ep_softc *sc = &ep_softc[unit]; outw(BASE + EP_COMMAND, RX_DISABLE); outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK); while (inb(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS) ; outw(BASE + EP_COMMAND, TX_DISABLE); outw(BASE + EP_COMMAND, STOP_TRANSCEIVER); outw(BASE + EP_COMMAND, RX_RESET); outw(BASE + EP_COMMAND, TX_RESET); outw(BASE + EP_COMMAND, C_INTR_LATCH); outw(BASE + EP_COMMAND, SET_RD_0_MASK); outw(BASE + EP_COMMAND, SET_INTR_MASK); outw(BASE + EP_COMMAND, SET_RX_FILTER); return; } /* * This is adapted straight from the book. There's probably a better way. */ static int send_ID_sequence(port) u_short port; { char cx, al; cx = 0x0ff; al = 0x0ff; outb(port, 0x0); DELAY(1000); outb(port, 0x0); DELAY(1000); loop1: cx--; outb(port, al); if (!(al & 0x80)) { al = al << 1; goto loop1; } al = al << 1; al ^= 0xcf; if (cx) goto loop1; return(1); } /* * We get eeprom data from the id_port given an offset into the * eeprom. Basically; after the ID_sequence is sent to all of * the cards; they enter the ID_CMD state where they will accept * command requests. 0x80-0xbf loads the eeprom data. We then * read the port 16 times and with every read; the cards check * for contention (ie: if one card writes a 0 bit and another * writes a 1 bit then the host sees a 0. At the end of the cycle; * each card compares the data on the bus; if there is a difference * then that card goes into ID_WAIT state again). In the meantime; * one bit of data is returned in the AX register which is conveniently * returned to us by inb(). Hence; we read 16 times getting one * bit of data with each read. */ static u_short get_eeprom_data(id_port, offset) int id_port; int offset; { int i, data = 0; outb(id_port, 0x80 + offset); DELAY(1000); for (i = 0; i < 16; i++) data = (data << 1) | (inw(id_port) & 1); return (data); } static int is_eeprom_busy(is) struct isa_device *is; { int i = 0, j; register struct ep_softc *sc = &ep_softc[is->id_unit]; while (i++ < 100) { j = inw(BASE + EP_W0_EEPROM_COMMAND); if (j & EEPROM_BUSY) DELAY(100); else break; } if (i >= 100) { printf("\nep%d: eeprom failed to come ready.\n", is->id_unit); return (1); } if (j & EEPROM_TST_MODE) { printf("\nep%d: 3c509 in test mode. Erase pencil mark!\n", is->id_unit); return (1); } return (0); } void epmbufqueue(sp, dummy_arg) caddr_t sp; int dummy_arg; { struct ep_softc *sc = (struct ep_softc *)sp; int i; if (sc->mb[sc->last_mb]) return; i = sc->last_mb; do { MGET(sc->mb[i], M_DONTWAIT, MT_DATA); if (!sc->mb[i]) break; i = (i + 1) % MAX_MBS; } while (i != sc->next_mb); sc->last_mb = i; return; } #endif /* NEP > 0 */