/*- * Copyright (c) 1997, 1998, 1999, 2000-2003 * Bill Paul . All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by Bill Paul. * 4. Neither the name of the author nor the names of any co-contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF * THE POSSIBILITY OF SUCH DAMAGE. */ #include __FBSDID("$FreeBSD$"); /* * ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the * LinkSys USB200M and various other adapters. * * Manuals available from: * http://www.asix.com.tw/datasheet/mac/Ax88172.PDF * Note: you need the manual for the AX88170 chip (USB 1.x ethernet * controller) to find the definitions for the RX control register. * http://www.asix.com.tw/datasheet/mac/Ax88170.PDF * * Written by Bill Paul * Senior Engineer * Wind River Systems */ /* * The AX88172 provides USB ethernet supports at 10 and 100Mbps. * It uses an external PHY (reference designs use a RealTek chip), * and has a 64-bit multicast hash filter. There is some information * missing from the manual which one needs to know in order to make * the chip function: * * - You must set bit 7 in the RX control register, otherwise the * chip won't receive any packets. * - You must initialize all 3 IPG registers, or you won't be able * to send any packets. * * Note that this device appears to only support loading the station * address via autload from the EEPROM (i.e. there's no way to manaully * set it). * * (Adam Weinberger wanted me to name this driver if_gir.c.) */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #if __FreeBSD_version < 500000 #include #endif #include #include #include #include #include "usbdevs.h" #include #include #include /* "device miibus" required. See GENERIC if you get errors here. */ #include "miibus_if.h" #include /* * Various supported device vendors/products. */ Static struct axe_type axe_devs[] = { { USB_VENDOR_ASIX, USB_PRODUCT_ASIX_AX88172 }, { USB_VENDOR_DLINK, USB_PRODUCT_DLINK_DUBE100 }, { USB_VENDOR_JVC, USB_PRODUCT_JVC_MP_PRX1 }, { USB_VENDOR_LINKSYS2, USB_PRODUCT_LINKSYS2_USB200M }, { USB_VENDOR_MELCO, USB_PRODUCT_MELCO_LUAU2KTX }, { USB_VENDOR_NETGEAR, USB_PRODUCT_NETGEAR_FA120 }, { USB_VENDOR_SYSTEMTALKS, USB_PRODUCT_SYSTEMTALKS_SGCX2UL }, { USB_VENDOR_SITECOM, USB_PRODUCT_SITECOM_LN029 }, { 0, 0 } }; Static int axe_match(device_ptr_t); Static int axe_attach(device_ptr_t); Static int axe_detach(device_ptr_t); Static int axe_encap(struct axe_softc *, struct mbuf *, int); Static void axe_rxeof(usbd_xfer_handle, usbd_private_handle, usbd_status); Static void axe_txeof(usbd_xfer_handle, usbd_private_handle, usbd_status); Static void axe_tick(void *); Static void axe_rxstart(struct ifnet *); Static void axe_start(struct ifnet *); Static int axe_ioctl(struct ifnet *, u_long, caddr_t); Static void axe_init(void *); Static void axe_stop(struct axe_softc *); Static void axe_watchdog(struct ifnet *); Static void axe_shutdown(device_ptr_t); Static int axe_miibus_readreg(device_ptr_t, int, int); Static int axe_miibus_writereg(device_ptr_t, int, int, int); Static void axe_miibus_statchg(device_ptr_t); Static int axe_cmd(struct axe_softc *, int, int, int, void *); Static int axe_ifmedia_upd(struct ifnet *); Static void axe_ifmedia_sts(struct ifnet *, struct ifmediareq *); Static void axe_setmulti(struct axe_softc *); Static device_method_t axe_methods[] = { /* Device interface */ DEVMETHOD(device_probe, axe_match), DEVMETHOD(device_attach, axe_attach), DEVMETHOD(device_detach, axe_detach), DEVMETHOD(device_shutdown, axe_shutdown), /* bus interface */ DEVMETHOD(bus_print_child, bus_generic_print_child), DEVMETHOD(bus_driver_added, bus_generic_driver_added), /* MII interface */ DEVMETHOD(miibus_readreg, axe_miibus_readreg), DEVMETHOD(miibus_writereg, axe_miibus_writereg), DEVMETHOD(miibus_statchg, axe_miibus_statchg), { 0, 0 } }; Static driver_t axe_driver = { "axe", axe_methods, sizeof(struct axe_softc) }; Static devclass_t axe_devclass; DRIVER_MODULE(axe, uhub, axe_driver, axe_devclass, usbd_driver_load, 0); DRIVER_MODULE(miibus, axe, miibus_driver, miibus_devclass, 0, 0); MODULE_DEPEND(axe, usb, 1, 1, 1); MODULE_DEPEND(axe, miibus, 1, 1, 1); Static int axe_cmd(struct axe_softc *sc, int cmd, int index, int val, void *buf) { usb_device_request_t req; usbd_status err; if (sc->axe_dying) return(0); if (AXE_CMD_DIR(cmd)) req.bmRequestType = UT_WRITE_VENDOR_DEVICE; else req.bmRequestType = UT_READ_VENDOR_DEVICE; req.bRequest = AXE_CMD_CMD(cmd); USETW(req.wValue, val); USETW(req.wIndex, index); USETW(req.wLength, AXE_CMD_LEN(cmd)); err = usbd_do_request(sc->axe_udev, &req, buf); if (err) return(-1); return(0); } Static int axe_miibus_readreg(device_ptr_t dev, int phy, int reg) { struct axe_softc *sc = USBGETSOFTC(dev); usbd_status err; u_int16_t val; if (sc->axe_dying) return(0); #ifdef notdef /* * The chip tells us the MII address of any supported * PHYs attached to the chip, so only read from those. */ if (sc->axe_phyaddrs[0] != AXE_NOPHY && phy != sc->axe_phyaddrs[0]) return (0); if (sc->axe_phyaddrs[1] != AXE_NOPHY && phy != sc->axe_phyaddrs[1]) return (0); #endif if (sc->axe_phyaddrs[0] != 0xFF && sc->axe_phyaddrs[0] != phy) return (0); AXE_LOCK(sc); axe_cmd(sc, AXE_CMD_MII_OPMODE_SW, 0, 0, NULL); err = axe_cmd(sc, AXE_CMD_MII_READ_REG, reg, phy, (void *)&val); axe_cmd(sc, AXE_CMD_MII_OPMODE_HW, 0, 0, NULL); AXE_UNLOCK(sc); if (err) { printf("axe%d: read PHY failed\n", sc->axe_unit); return(-1); } if (val) sc->axe_phyaddrs[0] = phy; return (val); } Static int axe_miibus_writereg(device_ptr_t dev, int phy, int reg, int val) { struct axe_softc *sc = USBGETSOFTC(dev); usbd_status err; if (sc->axe_dying) return(0); AXE_LOCK(sc); axe_cmd(sc, AXE_CMD_MII_OPMODE_SW, 0, 0, NULL); err = axe_cmd(sc, AXE_CMD_MII_WRITE_REG, reg, phy, (void *)&val); axe_cmd(sc, AXE_CMD_MII_OPMODE_HW, 0, 0, NULL); AXE_UNLOCK(sc); if (err) { printf("axe%d: write PHY failed\n", sc->axe_unit); return(-1); } return (0); } Static void axe_miibus_statchg(device_ptr_t dev) { #ifdef notdef struct axe_softc *sc = USBGETSOFTC(dev); struct mii_data *mii = GET_MII(sc); #endif /* doesn't seem to be necessary */ return; } /* * Set media options. */ Static int axe_ifmedia_upd(struct ifnet *ifp) { struct axe_softc *sc = ifp->if_softc; struct mii_data *mii = GET_MII(sc); sc->axe_link = 0; if (mii->mii_instance) { struct mii_softc *miisc; LIST_FOREACH(miisc, &mii->mii_phys, mii_list) mii_phy_reset(miisc); } mii_mediachg(mii); return (0); } /* * Report current media status. */ Static void axe_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr) { struct axe_softc *sc = ifp->if_softc; struct mii_data *mii = GET_MII(sc); mii_pollstat(mii); ifmr->ifm_active = mii->mii_media_active; ifmr->ifm_status = mii->mii_media_status; return; } Static void axe_setmulti(struct axe_softc *sc) { struct ifnet *ifp; struct ifmultiaddr *ifma; u_int32_t h = 0; u_int16_t rxmode; u_int8_t hashtbl[8] = { 0, 0, 0, 0, 0, 0, 0, 0 }; ifp = sc->axe_ifp; AXE_LOCK(sc); axe_cmd(sc, AXE_CMD_RXCTL_READ, 0, 0, (void *)&rxmode); if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) { rxmode |= AXE_RXCMD_ALLMULTI; axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL); AXE_UNLOCK(sc); return; } else rxmode &= ~AXE_RXCMD_ALLMULTI; IF_ADDR_LOCK(ifp); #if __FreeBSD_version >= 500000 TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) #else LIST_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) #endif { if (ifma->ifma_addr->sa_family != AF_LINK) continue; h = ether_crc32_be(LLADDR((struct sockaddr_dl *) ifma->ifma_addr), ETHER_ADDR_LEN) >> 26; hashtbl[h / 8] |= 1 << (h % 8); } IF_ADDR_UNLOCK(ifp); axe_cmd(sc, AXE_CMD_WRITE_MCAST, 0, 0, (void *)&hashtbl); axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL); AXE_UNLOCK(sc); return; } Static void axe_reset(struct axe_softc *sc) { if (sc->axe_dying) return; if (usbd_set_config_no(sc->axe_udev, AXE_CONFIG_NO, 1) || usbd_device2interface_handle(sc->axe_udev, AXE_IFACE_IDX, &sc->axe_iface)) { printf("axe%d: getting interface handle failed\n", sc->axe_unit); } /* Wait a little while for the chip to get its brains in order. */ DELAY(1000); return; } /* * Probe for a AX88172 chip. */ USB_MATCH(axe) { USB_MATCH_START(axe, uaa); struct axe_type *t; if (!uaa->iface) return(UMATCH_NONE); t = axe_devs; while(t->axe_vid) { if (uaa->vendor == t->axe_vid && uaa->product == t->axe_did) { return(UMATCH_VENDOR_PRODUCT); } t++; } return(UMATCH_NONE); } /* * Attach the interface. Allocate softc structures, do ifmedia * setup and ethernet/BPF attach. */ USB_ATTACH(axe) { USB_ATTACH_START(axe, sc, uaa); char devinfo[1024]; u_char eaddr[ETHER_ADDR_LEN]; struct ifnet *ifp; usb_interface_descriptor_t *id; usb_endpoint_descriptor_t *ed; int i; bzero(sc, sizeof(struct axe_softc)); sc->axe_udev = uaa->device; sc->axe_dev = self; sc->axe_unit = device_get_unit(self); if (usbd_set_config_no(sc->axe_udev, AXE_CONFIG_NO, 1)) { printf("axe%d: getting interface handle failed\n", sc->axe_unit); USB_ATTACH_ERROR_RETURN; } if (usbd_device2interface_handle(uaa->device, AXE_IFACE_IDX, &sc->axe_iface)) { printf("axe%d: getting interface handle failed\n", sc->axe_unit); USB_ATTACH_ERROR_RETURN; } id = usbd_get_interface_descriptor(sc->axe_iface); usbd_devinfo(uaa->device, 0, devinfo); device_set_desc_copy(self, devinfo); printf("%s: %s\n", USBDEVNAME(self), devinfo); /* Find endpoints. */ for (i = 0; i < id->bNumEndpoints; i++) { ed = usbd_interface2endpoint_descriptor(sc->axe_iface, i); if (!ed) { printf("axe%d: couldn't get ep %d\n", sc->axe_unit, i); USB_ATTACH_ERROR_RETURN; } if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { sc->axe_ed[AXE_ENDPT_RX] = ed->bEndpointAddress; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT && UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) { sc->axe_ed[AXE_ENDPT_TX] = ed->bEndpointAddress; } else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN && UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) { sc->axe_ed[AXE_ENDPT_INTR] = ed->bEndpointAddress; } } #if __FreeBSD_version >= 500000 mtx_init(&sc->axe_mtx, device_get_nameunit(self), MTX_NETWORK_LOCK, MTX_DEF | MTX_RECURSE); #endif AXE_LOCK(sc); /* * Get station address. */ axe_cmd(sc, AXE_CMD_READ_NODEID, 0, 0, &eaddr); /* * Load IPG values and PHY indexes. */ axe_cmd(sc, AXE_CMD_READ_IPG012, 0, 0, (void *)&sc->axe_ipgs); axe_cmd(sc, AXE_CMD_READ_PHYID, 0, 0, (void *)&sc->axe_phyaddrs); /* * Work around broken adapters that appear to lie about * their PHY addresses. */ sc->axe_phyaddrs[0] = sc->axe_phyaddrs[1] = 0xFF; ifp = sc->axe_ifp = if_alloc(IFT_ETHER); if (ifp == NULL) { printf("axe%d: can not if_alloc()\n", sc->axe_unit); AXE_UNLOCK(sc); #if __FreeBSD_version >= 500000 mtx_destroy(&sc->axe_mtx); #endif USB_ATTACH_ERROR_RETURN; } ifp->if_softc = sc; if_initname(ifp, "axe", sc->axe_unit); ifp->if_mtu = ETHERMTU; ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST | IFF_NEEDSGIANT; ifp->if_ioctl = axe_ioctl; ifp->if_start = axe_start; ifp->if_watchdog = axe_watchdog; ifp->if_init = axe_init; ifp->if_snd.ifq_maxlen = IFQ_MAXLEN; sc->axe_qdat.ifp = ifp; sc->axe_qdat.if_rxstart = axe_rxstart; if (mii_phy_probe(self, &sc->axe_miibus, axe_ifmedia_upd, axe_ifmedia_sts)) { printf("axe%d: MII without any PHY!\n", sc->axe_unit); if_free(ifp); AXE_UNLOCK(sc); #if __FreeBSD_version >= 500000 mtx_destroy(&sc->axe_mtx); #endif USB_ATTACH_ERROR_RETURN; } /* * Call MI attach routine. */ #if __FreeBSD_version >= 500000 ether_ifattach(ifp, eaddr); #else ether_ifattach(ifp, ETHER_BPF_SUPPORTED); #endif callout_handle_init(&sc->axe_stat_ch); usb_register_netisr(); sc->axe_dying = 0; AXE_UNLOCK(sc); USB_ATTACH_SUCCESS_RETURN; } Static int axe_detach(device_ptr_t dev) { struct axe_softc *sc; struct ifnet *ifp; sc = device_get_softc(dev); AXE_LOCK(sc); ifp = sc->axe_ifp; sc->axe_dying = 1; untimeout(axe_tick, sc, sc->axe_stat_ch); #if __FreeBSD_version >= 500000 ether_ifdetach(ifp); if_free(ifp); #else ether_ifdetach(ifp, ETHER_BPF_SUPPORTED); #endif if (sc->axe_ep[AXE_ENDPT_TX] != NULL) usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_TX]); if (sc->axe_ep[AXE_ENDPT_RX] != NULL) usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_RX]); if (sc->axe_ep[AXE_ENDPT_INTR] != NULL) usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_INTR]); AXE_UNLOCK(sc); #if __FreeBSD_version >= 500000 mtx_destroy(&sc->axe_mtx); #endif return(0); } Static void axe_rxstart(struct ifnet *ifp) { struct axe_softc *sc; struct ue_chain *c; sc = ifp->if_softc; AXE_LOCK(sc); c = &sc->axe_cdata.ue_rx_chain[sc->axe_cdata.ue_rx_prod]; c->ue_mbuf = usb_ether_newbuf(); if (c->ue_mbuf == NULL) { printf("%s: no memory for rx list " "-- packet dropped!\n", USBDEVNAME(sc->axe_dev)); ifp->if_ierrors++; AXE_UNLOCK(sc); return; } /* Setup new transfer. */ usbd_setup_xfer(c->ue_xfer, sc->axe_ep[AXE_ENDPT_RX], c, mtod(c->ue_mbuf, char *), UE_BUFSZ, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, axe_rxeof); usbd_transfer(c->ue_xfer); AXE_UNLOCK(sc); return; } /* * A frame has been uploaded: pass the resulting mbuf chain up to * the higher level protocols. */ Static void axe_rxeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) { struct axe_softc *sc; struct ue_chain *c; struct mbuf *m; struct ifnet *ifp; int total_len = 0; c = priv; sc = c->ue_sc; AXE_LOCK(sc); ifp = sc->axe_ifp; if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) { AXE_UNLOCK(sc); return; } if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) { AXE_UNLOCK(sc); return; } if (usbd_ratecheck(&sc->axe_rx_notice)) printf("axe%d: usb error on rx: %s\n", sc->axe_unit, usbd_errstr(status)); if (status == USBD_STALLED) usbd_clear_endpoint_stall(sc->axe_ep[AXE_ENDPT_RX]); goto done; } usbd_get_xfer_status(xfer, NULL, NULL, &total_len, NULL); m = c->ue_mbuf; if (total_len < sizeof(struct ether_header)) { ifp->if_ierrors++; goto done; } ifp->if_ipackets++; m->m_pkthdr.rcvif = (void *)&sc->axe_qdat; m->m_pkthdr.len = m->m_len = total_len; /* Put the packet on the special USB input queue. */ usb_ether_input(m); AXE_UNLOCK(sc); return; done: /* Setup new transfer. */ usbd_setup_xfer(c->ue_xfer, sc->axe_ep[AXE_ENDPT_RX], c, mtod(c->ue_mbuf, char *), UE_BUFSZ, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, axe_rxeof); usbd_transfer(c->ue_xfer); AXE_UNLOCK(sc); return; } /* * A frame was downloaded to the chip. It's safe for us to clean up * the list buffers. */ Static void axe_txeof(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status) { struct axe_softc *sc; struct ue_chain *c; struct ifnet *ifp; usbd_status err; c = priv; sc = c->ue_sc; AXE_LOCK(sc); ifp = sc->axe_ifp; if (status != USBD_NORMAL_COMPLETION) { if (status == USBD_NOT_STARTED || status == USBD_CANCELLED) { AXE_UNLOCK(sc); return; } printf("axe%d: usb error on tx: %s\n", sc->axe_unit, usbd_errstr(status)); if (status == USBD_STALLED) usbd_clear_endpoint_stall(sc->axe_ep[AXE_ENDPT_TX]); AXE_UNLOCK(sc); return; } ifp->if_timer = 0; ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; usbd_get_xfer_status(c->ue_xfer, NULL, NULL, NULL, &err); if (c->ue_mbuf != NULL) { c->ue_mbuf->m_pkthdr.rcvif = ifp; usb_tx_done(c->ue_mbuf); c->ue_mbuf = NULL; } if (err) ifp->if_oerrors++; else ifp->if_opackets++; AXE_UNLOCK(sc); return; } Static void axe_tick(void *xsc) { struct axe_softc *sc; struct ifnet *ifp; struct mii_data *mii; sc = xsc; if (sc == NULL) return; AXE_LOCK(sc); ifp = sc->axe_ifp; mii = GET_MII(sc); if (mii == NULL) { AXE_UNLOCK(sc); return; } mii_tick(mii); if (!sc->axe_link && mii->mii_media_status & IFM_ACTIVE && IFM_SUBTYPE(mii->mii_media_active) != IFM_NONE) { sc->axe_link++; if (ifp->if_snd.ifq_head != NULL) axe_start(ifp); } sc->axe_stat_ch = timeout(axe_tick, sc, hz); AXE_UNLOCK(sc); return; } Static int axe_encap(struct axe_softc *sc, struct mbuf *m, int idx) { struct ue_chain *c; usbd_status err; c = &sc->axe_cdata.ue_tx_chain[idx]; /* * Copy the mbuf data into a contiguous buffer, leaving two * bytes at the beginning to hold the frame length. */ m_copydata(m, 0, m->m_pkthdr.len, c->ue_buf); c->ue_mbuf = m; usbd_setup_xfer(c->ue_xfer, sc->axe_ep[AXE_ENDPT_TX], c, c->ue_buf, m->m_pkthdr.len, USBD_FORCE_SHORT_XFER, 10000, axe_txeof); /* Transmit */ err = usbd_transfer(c->ue_xfer); if (err != USBD_IN_PROGRESS) { axe_stop(sc); return(EIO); } sc->axe_cdata.ue_tx_cnt++; return(0); } Static void axe_start(struct ifnet *ifp) { struct axe_softc *sc; struct mbuf *m_head = NULL; sc = ifp->if_softc; AXE_LOCK(sc); if (!sc->axe_link) { AXE_UNLOCK(sc); return; } if (ifp->if_drv_flags & IFF_DRV_OACTIVE) { AXE_UNLOCK(sc); return; } IF_DEQUEUE(&ifp->if_snd, m_head); if (m_head == NULL) { AXE_UNLOCK(sc); return; } if (axe_encap(sc, m_head, 0)) { IF_PREPEND(&ifp->if_snd, m_head); ifp->if_drv_flags |= IFF_DRV_OACTIVE; AXE_UNLOCK(sc); return; } /* * If there's a BPF listener, bounce a copy of this frame * to him. */ BPF_MTAP(ifp, m_head); ifp->if_drv_flags |= IFF_DRV_OACTIVE; /* * Set a timeout in case the chip goes out to lunch. */ ifp->if_timer = 5; AXE_UNLOCK(sc); return; } Static void axe_init(void *xsc) { struct axe_softc *sc = xsc; struct ifnet *ifp = sc->axe_ifp; struct ue_chain *c; usbd_status err; int i; int rxmode; if (ifp->if_drv_flags & IFF_DRV_RUNNING) return; AXE_LOCK(sc); /* * Cancel pending I/O and free all RX/TX buffers. */ axe_reset(sc); #ifdef notdef /* Set MAC address */ axe_mac(sc, IF_LLADDR(sc->axe_ifp), 1); #endif /* Enable RX logic. */ /* Init TX ring. */ if (usb_ether_tx_list_init(sc, &sc->axe_cdata, sc->axe_udev) == ENOBUFS) { printf("axe%d: tx list init failed\n", sc->axe_unit); AXE_UNLOCK(sc); return; } /* Init RX ring. */ if (usb_ether_rx_list_init(sc, &sc->axe_cdata, sc->axe_udev) == ENOBUFS) { printf("axe%d: rx list init failed\n", sc->axe_unit); AXE_UNLOCK(sc); return; } /* Set transmitter IPG values */ axe_cmd(sc, AXE_CMD_WRITE_IPG0, 0, sc->axe_ipgs[0], NULL); axe_cmd(sc, AXE_CMD_WRITE_IPG1, 0, sc->axe_ipgs[1], NULL); axe_cmd(sc, AXE_CMD_WRITE_IPG2, 0, sc->axe_ipgs[2], NULL); /* Enable receiver, set RX mode */ rxmode = AXE_RXCMD_UNICAST|AXE_RXCMD_MULTICAST|AXE_RXCMD_ENABLE; /* If we want promiscuous mode, set the allframes bit. */ if (ifp->if_flags & IFF_PROMISC) rxmode |= AXE_RXCMD_PROMISC; if (ifp->if_flags & IFF_BROADCAST) rxmode |= AXE_RXCMD_BROADCAST; axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL); /* Load the multicast filter. */ axe_setmulti(sc); /* Open RX and TX pipes. */ err = usbd_open_pipe(sc->axe_iface, sc->axe_ed[AXE_ENDPT_RX], USBD_EXCLUSIVE_USE, &sc->axe_ep[AXE_ENDPT_RX]); if (err) { printf("axe%d: open rx pipe failed: %s\n", sc->axe_unit, usbd_errstr(err)); AXE_UNLOCK(sc); return; } err = usbd_open_pipe(sc->axe_iface, sc->axe_ed[AXE_ENDPT_TX], USBD_EXCLUSIVE_USE, &sc->axe_ep[AXE_ENDPT_TX]); if (err) { printf("axe%d: open tx pipe failed: %s\n", sc->axe_unit, usbd_errstr(err)); AXE_UNLOCK(sc); return; } /* Start up the receive pipe. */ for (i = 0; i < UE_RX_LIST_CNT; i++) { c = &sc->axe_cdata.ue_rx_chain[i]; usbd_setup_xfer(c->ue_xfer, sc->axe_ep[AXE_ENDPT_RX], c, mtod(c->ue_mbuf, char *), UE_BUFSZ, USBD_SHORT_XFER_OK, USBD_NO_TIMEOUT, axe_rxeof); usbd_transfer(c->ue_xfer); } ifp->if_drv_flags |= IFF_DRV_RUNNING; ifp->if_drv_flags &= ~IFF_DRV_OACTIVE; AXE_UNLOCK(sc); sc->axe_stat_ch = timeout(axe_tick, sc, hz); return; } Static int axe_ioctl(struct ifnet *ifp, u_long command, caddr_t data) { struct axe_softc *sc = ifp->if_softc; struct ifreq *ifr = (struct ifreq *)data; struct mii_data *mii; u_int16_t rxmode; int error = 0; switch(command) { case SIOCSIFFLAGS: if (ifp->if_flags & IFF_UP) { if (ifp->if_drv_flags & IFF_DRV_RUNNING && ifp->if_flags & IFF_PROMISC && !(sc->axe_if_flags & IFF_PROMISC)) { AXE_LOCK(sc); axe_cmd(sc, AXE_CMD_RXCTL_READ, 0, 0, (void *)&rxmode); rxmode |= AXE_RXCMD_PROMISC; axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL); AXE_UNLOCK(sc); axe_setmulti(sc); } else if (ifp->if_drv_flags & IFF_DRV_RUNNING && !(ifp->if_flags & IFF_PROMISC) && sc->axe_if_flags & IFF_PROMISC) { AXE_LOCK(sc); axe_cmd(sc, AXE_CMD_RXCTL_READ, 0, 0, (void *)&rxmode); rxmode &= ~AXE_RXCMD_PROMISC; axe_cmd(sc, AXE_CMD_RXCTL_WRITE, 0, rxmode, NULL); AXE_UNLOCK(sc); axe_setmulti(sc); } else if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) axe_init(sc); } else { if (ifp->if_drv_flags & IFF_DRV_RUNNING) axe_stop(sc); } sc->axe_if_flags = ifp->if_flags; error = 0; break; case SIOCADDMULTI: case SIOCDELMULTI: axe_setmulti(sc); error = 0; break; case SIOCGIFMEDIA: case SIOCSIFMEDIA: mii = GET_MII(sc); error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command); break; default: error = ether_ioctl(ifp, command, data); break; } AXE_UNLOCK(sc); return(error); } Static void axe_watchdog(struct ifnet *ifp) { struct axe_softc *sc; struct ue_chain *c; usbd_status stat; sc = ifp->if_softc; AXE_LOCK(sc); ifp->if_oerrors++; printf("axe%d: watchdog timeout\n", sc->axe_unit); c = &sc->axe_cdata.ue_tx_chain[0]; usbd_get_xfer_status(c->ue_xfer, NULL, NULL, NULL, &stat); axe_txeof(c->ue_xfer, c, stat); AXE_UNLOCK(sc); if (ifp->if_snd.ifq_head != NULL) axe_start(ifp); return; } /* * Stop the adapter and free any mbufs allocated to the * RX and TX lists. */ Static void axe_stop(struct axe_softc *sc) { usbd_status err; struct ifnet *ifp; AXE_LOCK(sc); ifp = sc->axe_ifp; ifp->if_timer = 0; untimeout(axe_tick, sc, sc->axe_stat_ch); /* Stop transfers. */ if (sc->axe_ep[AXE_ENDPT_RX] != NULL) { err = usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_RX]); if (err) { printf("axe%d: abort rx pipe failed: %s\n", sc->axe_unit, usbd_errstr(err)); } err = usbd_close_pipe(sc->axe_ep[AXE_ENDPT_RX]); if (err) { printf("axe%d: close rx pipe failed: %s\n", sc->axe_unit, usbd_errstr(err)); } sc->axe_ep[AXE_ENDPT_RX] = NULL; } if (sc->axe_ep[AXE_ENDPT_TX] != NULL) { err = usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_TX]); if (err) { printf("axe%d: abort tx pipe failed: %s\n", sc->axe_unit, usbd_errstr(err)); } err = usbd_close_pipe(sc->axe_ep[AXE_ENDPT_TX]); if (err) { printf("axe%d: close tx pipe failed: %s\n", sc->axe_unit, usbd_errstr(err)); } sc->axe_ep[AXE_ENDPT_TX] = NULL; } if (sc->axe_ep[AXE_ENDPT_INTR] != NULL) { err = usbd_abort_pipe(sc->axe_ep[AXE_ENDPT_INTR]); if (err) { printf("axe%d: abort intr pipe failed: %s\n", sc->axe_unit, usbd_errstr(err)); } err = usbd_close_pipe(sc->axe_ep[AXE_ENDPT_INTR]); if (err) { printf("axe%d: close intr pipe failed: %s\n", sc->axe_unit, usbd_errstr(err)); } sc->axe_ep[AXE_ENDPT_INTR] = NULL; } axe_reset(sc); /* Free RX resources. */ usb_ether_rx_list_free(&sc->axe_cdata); /* Free TX resources. */ usb_ether_tx_list_free(&sc->axe_cdata); ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE); sc->axe_link = 0; AXE_UNLOCK(sc); return; } /* * Stop all chip I/O so that the kernel's probe routines don't * get confused by errant DMAs when rebooting. */ Static void axe_shutdown(device_ptr_t dev) { struct axe_softc *sc; sc = device_get_softc(dev); axe_stop(sc); return; }