/*- * Copyright (c) 2001 Brian Somers * based on work by Slawa Olhovchenkov * John Prince * Eric Hernes * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * */ #include __FBSDID("$FreeBSD$"); /*- * TODO: * Figure out how to make the non-Xi boards use memory addresses other * than 0xd0000 !!! */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* Valid i/o addresses are any of these with either 0 or 4 added */ static u_long digi_validio[] = { 0x100, 0x110, 0x120, 0x200, 0x220, 0x300, 0x320 }; #define DIGI_NVALIDIO (sizeof(digi_validio) / sizeof(digi_validio[0])) #define IO_SIZE 0x04 static u_long digi_validmem[] = { 0x80000, 0x88000, 0x90000, 0x98000, 0xa0000, 0xa8000, 0xb0000, 0xb8000, 0xc0000, 0xc8000, 0xd0000, 0xd8000, 0xe0000, 0xe8000, 0xf0000, 0xf8000, 0xf0000000, 0xf1000000, 0xf2000000, 0xf3000000, 0xf4000000, 0xf5000000, 0xf6000000, 0xf7000000, 0xf8000000, 0xf9000000, 0xfa000000, 0xfb000000, 0xfc000000, 0xfd000000, 0xfe000000, 0xff000000 }; #define DIGI_NVALIDMEM (sizeof(digi_validmem) / sizeof(digi_validmem[0])) static u_char * digi_isa_setwin(struct digi_softc *sc, unsigned int addr) { outb(sc->wport, sc->window = FEPWIN | (addr >> sc->win_bits)); return (sc->vmem + (addr % sc->win_size)); } static u_char * digi_xi_setwin(struct digi_softc *sc, unsigned int addr) { outb(sc->wport, sc->window = FEPMEM); return (sc->vmem + addr); } static void digi_isa_hidewin(struct digi_softc *sc) { outb(sc->wport, sc->window = 0); /* outb(sc->port, 0); */ } static void digi_isa_towin(struct digi_softc *sc, int win) { outb(sc->wport, sc->window = win); } static void digi_xi_towin(struct digi_softc *sc, int win) { outb(sc->wport, sc->window = FEPMEM); } /* * sc->port should be set and its resource allocated. */ static int digi_isa_check(struct digi_softc *sc) { int i, ident; sc->name = NULL; /* Invasive probe - reset the card */ outb(sc->port, FEPRST); for (i = 0; (inb(sc->port) & FEPMASK) != FEPRST; i++) { if (i == hz / 10) return (0); digi_delay(sc, "digirst", 1); } DLOG(DIGIDB_INIT, (sc->dev, "got reset after %d iterations\n", i)); ident = inb(sc->port); /* * NOTE, this probe is all wrong. I haven't got the data sheets ! */ DLOG(DIGIDB_INIT, (sc->dev, "board type is 0x%x\n", ident)); if (ident & 0x1) { switch (ident) { case 0x05: case 0x15: case 0x25: case 0x35: sc->model = PCXI; sc->csigs = &digi_xixe_signals; switch (ident & 0x30) { case 0: sc->name = "Digiboard PC/Xi 64K"; sc->mem_seg = 0xf000; sc->win_size = 0x10000; sc->win_bits = 16; break; case 0x10: sc->name = "Digiboard PC/Xi 128K"; sc->mem_seg = 0xE000; sc->win_size = 0x20000; sc->win_bits = 17; break; case 0x20: sc->name = "Digiboard PC/Xi 256K"; sc->mem_seg = 0xC000; sc->win_size = 0x40000; sc->win_bits = 18; break; case 0x30: sc->name = "Digiboard PC/Xi 512K"; sc->mem_seg = 0x8000; sc->win_size = 0x80000; sc->win_bits = 19; break; } sc->wport = sc->port; sc->module = "Xe"; sc->setwin = digi_xi_setwin; sc->hidewin = digi_isa_hidewin; sc->towin = digi_xi_towin; break; case 0xf5: sc->name = "Digiboard PC/Xem"; sc->model = PCXEM; sc->csigs = &digi_normal_signals; sc->win_size = 0x8000; sc->win_bits = 15; sc->wport = sc->port + 1; sc->module = "Xem"; sc->setwin = digi_isa_setwin; sc->hidewin = digi_isa_hidewin; sc->towin = digi_isa_towin; break; } } else { outb(sc->port, 1); ident = inb(sc->port); if (ident & 0x1) { device_printf(sc->dev, "PC/Xm is unsupported\n"); return (0); } sc->mem_seg = 0xf000; if (!(ident & 0xc0)) { sc->name = "Digiboard PC/Xe 64K"; sc->model = PCXE; sc->csigs = &digi_xixe_signals; sc->win_size = 0x10000; sc->win_bits = 16; sc->wport = sc->port; } else { sc->name = "Digiboard PC/Xe 64/8K (windowed)"; sc->model = PCXEVE; sc->csigs = &digi_normal_signals; sc->win_size = 0x2000; sc->win_bits = 13; sc->wport = sc->port + 1; } sc->module = "Xe"; sc->setwin = digi_isa_setwin; sc->hidewin = digi_isa_hidewin; sc->towin = digi_isa_towin; } return (sc->name != NULL); } static int digi_isa_probe(device_t dev) { struct digi_softc *sc = device_get_softc(dev); int i; KASSERT(sc, ("digi%d: softc not allocated in digi_isa_probe\n", device_get_unit(dev))); bzero(sc, sizeof(*sc)); sc->status = DIGI_STATUS_NOTINIT; sc->dev = dev; sc->res.unit = device_get_unit(dev); if (sc->res.unit >= 16) { /* Don't overflow our control mask */ device_printf(dev, "At most 16 digiboards may be used\n"); return (ENXIO); } DLOG(DIGIDB_INIT, (sc->dev, "probing on isa bus\n")); /* Check that we've got a valid i/o address */ if ((sc->port = bus_get_resource_start(dev, SYS_RES_IOPORT, 0)) == 0) { DLOG(DIGIDB_INIT, (sc->dev, "io address not given\n")); return (ENXIO); } for (i = 0; i < DIGI_NVALIDIO; i++) if (sc->port == digi_validio[i] || sc->port == digi_validio[i] + 4) break; if (i == DIGI_NVALIDIO) { device_printf(dev, "0x%03x: Invalid i/o address\n", sc->port); return (ENXIO); } /* Ditto for our memory address */ if ((sc->pmem = bus_get_resource_start(dev, SYS_RES_MEMORY, 0)) == 0) return (ENXIO); for (i = 0; i < DIGI_NVALIDMEM; i++) if (sc->pmem == digi_validmem[i]) break; if (i == DIGI_NVALIDMEM) { device_printf(dev, "0x%lx: Invalid memory address\n", sc->pmem); return (ENXIO); } if ((sc->pmem & 0xfffffful) != sc->pmem) { device_printf(dev, "0x%lx: Memory address not supported\n", sc->pmem); return (ENXIO); } sc->vmem = (u_char *)sc->pmem; DLOG(DIGIDB_INIT, (sc->dev, "isa? port 0x%03x mem 0x%lx\n", sc->port, sc->pmem)); /* Temporarily map our io ports */ sc->res.iorid = 0; sc->res.io = bus_alloc_resource_anywhere(dev, SYS_RES_IOPORT, &sc->res.iorid, IO_SIZE, RF_ACTIVE); if (sc->res.io == NULL) return (ENXIO); /* Check the type of card and get internal memory characteristics */ if (!digi_isa_check(sc)) { bus_release_resource(dev, SYS_RES_IOPORT, sc->res.iorid, sc->res.io); return (ENXIO); } /* Temporarily map our memory */ sc->res.mrid = 0; sc->res.mem = bus_alloc_resource_anywhere(dev, SYS_RES_MEMORY, &sc->res.mrid, sc->win_size, 0); if (sc->res.mem == NULL) { device_printf(dev, "0x%lx: Memory range is in use\n", sc->pmem); bus_release_resource(dev, SYS_RES_IOPORT, sc->res.iorid, sc->res.io); return (ENXIO); } outb(sc->port, FEPCLR); /* drop RESET */ sc->hidewin(sc); /* set initial sc->window */ bus_release_resource(dev, SYS_RES_MEMORY, sc->res.mrid, sc->res.mem); bus_release_resource(dev, SYS_RES_IOPORT, sc->res.iorid, sc->res.io); /* Let digi_isa_attach() know what we've found */ bus_set_resource(dev, SYS_RES_IOPORT, 0, sc->port, IO_SIZE); bus_set_resource(dev, SYS_RES_MEMORY, 0, sc->pmem, sc->win_size); DLOG(DIGIDB_INIT, (sc->dev, "Probe returns -10\n")); return (-10); /* Other drivers are preferred for now */ } static int digi_isa_attach(device_t dev) { struct digi_softc *sc = device_get_softc(dev); int i, t, res; u_char *ptr; int reset; u_long msize, iosize; long scport; KASSERT(sc, ("digi%d: softc not allocated in digi_isa_attach\n", device_get_unit(dev))); res = ENXIO; bzero(sc, sizeof(*sc)); sc->status = DIGI_STATUS_NOTINIT; sc->dev = dev; sc->res.unit = device_get_unit(dev); DLOG(DIGIDB_INIT, (sc->dev, "attaching\n")); bus_get_resource(dev, SYS_RES_IOPORT, 0, &scport, &iosize); bus_get_resource(dev, SYS_RES_MEMORY, 0, &sc->pmem, &msize); sc->port = scport; /* sc->altpin = !!(device_get_flags(dev) & DGBFLAG_ALTPIN); */ /* Allocate resources (verified in digi_isa_probe()) */ sc->res.iorid = 0; sc->res.io = bus_alloc_resource_anywhere(dev, SYS_RES_IOPORT, &sc->res.iorid, iosize, RF_ACTIVE); if (sc->res.io == NULL) return (ENXIO); /* Check the type of card and get internal memory characteristics */ DLOG(DIGIDB_INIT, (sc->dev, "Checking card type\n")); if (!digi_isa_check(sc)) goto failed; callout_handle_init(&sc->callout); callout_handle_init(&sc->inttest); sc->res.mrid = 0; sc->res.mem = bus_alloc_resource_anywhere(dev, SYS_RES_MEMORY, &sc->res.mrid, msize, RF_ACTIVE); if (sc->res.mem == NULL) { device_printf(dev, "0x%lx: Memory range is in use\n", sc->pmem); sc->hidewin(sc); goto failed; } /* map memory */ sc->vmem = pmap_mapdev(sc->pmem, msize); DLOG(DIGIDB_INIT, (sc->dev, "internal memory segment 0x%x\n", sc->mem_seg)); /* Start by resetting the card */ reset = FEPRST; if (sc->model == PCXI) reset |= FEPMEM; outb(sc->port, reset); for (i = 0; (inb(sc->port) & FEPMASK) != reset; i++) { if (i == hz / 10) { device_printf(dev, "1st reset failed\n"); sc->hidewin(sc); goto failed; } digi_delay(sc, "digirst1", 1); } DLOG(DIGIDB_INIT, (sc->dev, "got reset after %d iterations\n", i)); if (sc->model != PCXI) { t = (sc->pmem >> 8) & 0xffe0; if (sc->model == PCXEVE) t |= 0x10; /* enable windowing */ outb(sc->port + 2, t & 0xff); outb(sc->port + 3, t >> 8); } if (sc->model == PCXI || sc->model == PCXE) { outb(sc->port, FEPRST | FEPMEM); for (i = 0; (inb(sc->port) & FEPMASK) != FEPRST; i++) { if (i == hz / 10) { device_printf(dev, "memory reservation failed (0x%02x)\n", inb(sc->port)); sc->hidewin(sc); goto failed; } digi_delay(sc, "digirst2", 1); } DLOG(DIGIDB_INIT, (sc->dev, "got memory after %d iterations\n", i)); } DLOG(DIGIDB_INIT, (sc->dev, "short memory test\n")); ptr = sc->setwin(sc, BOTWIN); vD(ptr) = 0xA55A3CC3; if (vD(ptr) != 0xA55A3CC3) { device_printf(dev, "1st memory test failed\n"); sc->hidewin(sc); goto failed; } DLOG(DIGIDB_INIT, (sc->dev, "1st memory test ok\n")); ptr = sc->setwin(sc, TOPWIN); vD(ptr) = 0x5AA5C33C; if (vD(ptr) != 0x5AA5C33C) { device_printf(dev, "2nd memory test failed\n"); sc->hidewin(sc); goto failed; } DLOG(DIGIDB_INIT, (sc->dev, "2nd memory test ok\n")); ptr = sc->setwin(sc, BIOSCODE + ((0xf000 - sc->mem_seg) << 4)); vD(ptr) = 0x5AA5C33C; if (vD(ptr) != 0x5AA5C33C) { device_printf(dev, "3rd (BIOS) memory test failed\n"); sc->hidewin(sc); goto failed; } DLOG(DIGIDB_INIT, (sc->dev, "3rd memory test ok\n")); if ((res = digi_attach(sc)) == 0) return (0); failed: if (sc->res.mem != NULL) { bus_release_resource(dev, SYS_RES_MEMORY, sc->res.mrid, sc->res.mem); sc->res.mem = NULL; } if (sc->res.io != NULL) { bus_release_resource(dev, SYS_RES_IOPORT, sc->res.iorid, sc->res.io); sc->res.io = NULL; } return (res); } static device_method_t digi_isa_methods[] = { /* Device interface */ DEVMETHOD(device_probe, digi_isa_probe), DEVMETHOD(device_attach, digi_isa_attach), DEVMETHOD(device_detach, digi_detach), DEVMETHOD(device_shutdown, digi_shutdown), DEVMETHOD_END }; static driver_t digi_isa_drv = { "digi", digi_isa_methods, sizeof(struct digi_softc), }; DRIVER_MODULE(digi, isa, digi_isa_drv, digi_devclass, 0, 0);