/* * * =================================== * HARP | Host ATM Research Platform * =================================== * * * This Host ATM Research Platform ("HARP") file (the "Software") is * made available by Network Computing Services, Inc. ("NetworkCS") * "AS IS". NetworkCS does not provide maintenance, improvements or * support of any kind. * * NETWORKCS MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, * INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY * AND FITNESS FOR A PARTICULAR PURPOSE, AS TO ANY ELEMENT OF THE * SOFTWARE OR ANY SUPPORT PROVIDED IN CONNECTION WITH THIS SOFTWARE. * In no event shall NetworkCS be responsible for any damages, including * but not limited to consequential damages, arising from or relating to * any use of the Software or related support. * * Copyright 1994-1998 Network Computing Services, Inc. * * Copies of this Software may be made, however, the above copyright * notice must be reproduced on all copies. * * @(#) $FreeBSD$ * */ /* * Efficient ENI Adapter Support * ----------------------------- * * Virtual Channel Managment * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef lint __RCSID("@(#) $FreeBSD$"); #endif /* * VCC Stack Instantiation * * This function is called via the common driver code during a device VCC * stack instantiation. The common code has already validated some of * the request so we just need to check a few more ENI-specific details. * * Called at splnet. * * Arguments: * cup pointer to device common unit * cvp pointer to common VCC entry * * Returns: * 0 instantiation successful * err instantiation failed - reason indicated * */ int eni_instvcc(cup, cvp) Cmn_unit *cup; Cmn_vcc *cvp; { Eni_unit *eup = (Eni_unit *)cup; Eni_vcc *evp = (Eni_vcc *)cvp; Atm_attributes *ap = &evp->ev_connvc->cvc_attr; /* * Validate requested AAL */ switch (ap->aal.type) { case ATM_AAL0: break; case ATM_AAL5: if ((ap->aal.v.aal5.forward_max_SDU_size > ENI_IFF_MTU) || (ap->aal.v.aal5.backward_max_SDU_size > ENI_IFF_MTU)) { eup->eu_stats.eni_st_drv.drv_vc_maxpdu++; return (EINVAL); } break; default: return (EINVAL); } return (0); } /* * Open a VCC * * This function is called via the common driver code after receiving a * stack *_INIT* command. The common code has already validated most of * the request so we just need to check a few more ENI-specific details. * * Called at splimp. * * Arguments: * cup pointer to device common unit * cvp pointer to common VCC entry * * Returns: * 0 open sucessful * err open failed * */ int eni_openvcc ( cup, cvp ) Cmn_unit *cup; Cmn_vcc *cvp; { Eni_unit *eup = (Eni_unit *)cup; Eni_vcc *evp = (Eni_vcc *)cvp; struct vccb *vcp = evp->ev_connvc->cvc_vcc; int err = 0; VCI_Table *vct; int size; int mode; int nsize; /* * Validate the VPI and VCI values */ if ( (vcp->vc_vpi > eup->eu_pif.pif_maxvpi) || (vcp->vc_vci > eup->eu_pif.pif_maxvci) ) { eup->eu_stats.eni_st_drv.drv_vc_badrng++; return ( EFAULT ); } /* * Check if this VCI is already active */ vct = &eup->eu_vcitbl[ vcp->vc_vci ]; if ( vct->vci_control >> VCI_MODE_SHIFT != VCI_MODE_TRASH ) { return ( EEXIST ); } /* * Allocate some permanent adapter memory for the reassembly * buffer. Special case the signalling channel(s) buffer size. * Otherwise, the buffer size will be based on whether this is * a server or client card. */ if ( vcp->vc_vci == UNI_SIG_VCI ) /* HACK */ size = RX_SIG_BSIZE; else size = (eup->eu_ramsize > MAX_CLIENT_RAM * ENI_BUF_PGSZ) ? RX_SERVER_BSIZE * ENI_BUF_PGSZ : RX_CLIENT_BSIZE * ENI_BUF_PGSZ; if ( ( evp->ev_rxbuf = eni_allocate_buffer ( eup, (u_long *)&size ) ) == (caddr_t)NULL ) { return ( ENOMEM ); } evp->ev_rxpos = 0; /* * We only need to open incoming VCI's so outbound VCI's * just get set to CVS_ACTIVE state. */ if ( ( vcp->vc_type & VCC_IN ) == 0 ) { /* * Set the state and return - nothing else needs to be done. */ evp->ev_state = CVS_ACTIVE; return ( 0 ); } /* * Set the VCI Table entry to start receiving */ mode = ( evp->ev_connvc->cvc_attr.aal.type == ATM_AAL5 ? VCI_MODE_AAL5 : VCI_MODE_AAL0 ); size >>= ENI_LOC_PREDIV; /* Predivide by 256 WORDS */ for ( nsize = -1; size; nsize++ ) size >>= 1; vct->vci_control = mode << VCI_MODE_SHIFT | PTI_MODE_TRASH << VCI_PTI_SHIFT | ( (u_int)(evp->ev_rxbuf) >> ENI_LOC_PREDIV ) << VCI_LOC_SHIFT | nsize << VCI_SIZE_SHIFT; vct->vci_descr = 0; /* Descr = Rdptr = 0 */ vct->vci_write = 0; /* WritePtr = CellCount = 0 */ /* * Indicate VC active */ evp->ev_state = CVS_ACTIVE; return ( err ); } /* * Close a VCC * * This function is called via the common driver code after receiving a * stack *_TERM* command. The common code has already validated most of * the request so we just need to check a few more ENI-specific details. * * Called at splimp. * * Arguments: * cup pointer to device common unit * cvp pointer to common VCC entry * * Returns: * 0 close sucessful * err close failed * */ int eni_closevcc ( cup, cvp ) Cmn_unit *cup; Cmn_vcc *cvp; { Eni_unit *eup = (Eni_unit *)cup; Eni_vcc *evp = (Eni_vcc *)cvp; struct vccb *vcp = evp->ev_connvc->cvc_vcc; int err = 0; VCI_Table *vct; /* * Clear any references to this VCC in our transmit queue */ /* * We'll simply allow any existing TX requests to be * sent as that's easier then pulling them out of * everywhere. Besides, they should be ignored at the * receiver whenever the other end shuts down. */ /* * Free the adapter receive buffer */ (void) eni_free_buffer ( eup, (caddr_t)evp->ev_rxbuf ); /* * If this is an outbound only VCI, then we can close * immediately. */ if ( ( vcp->vc_type & VCC_IN ) == 0 ) { /* * The state will be set to TERM when we return * to the *_TERM caller. */ return ( 0 ); } /* * Find VCI entry in VCI Table */ vct = &eup->eu_vcitbl[ vcp->vc_vci ]; /* * Reset the VCI state */ vct->vci_control = ( vct->vci_control & VCI_MODE_MASK ) /* | VCI_MODE_TRASH */; DELAY ( MIDWAY_DELAY ); /* Give the adapter time to */ /* make the transition */ /* * Reset everything */ bzero ( (void *)(uintptr_t)vct, sizeof(VCI_Table) ); return ( err ); }