/*
 *	from: vector.s, 386BSD 0.1 unknown origin
 * $FreeBSD$
 */

/*
 * modified for PC98 by Kakefuda
 */

#ifdef PC98
#define ICU_IMR_OFFSET		2	/* IO_ICU{1,2} + 2 */
#else
#define ICU_IMR_OFFSET		1	/* IO_ICU{1,2} + 1 */
#endif

#define	ICU_EOI			0x20	/* XXX - define elsewhere */

#define	IRQ_BIT(irq_num)	(1 << ((irq_num) % 8))
#define	IRQ_BYTE(irq_num)	((irq_num) >> 3)

#ifdef AUTO_EOI_1
#define	ENABLE_ICU1		/* use auto-EOI to reduce i/o */
#define	OUTB_ICU1
#else
#define	ENABLE_ICU1 \
	movb	$ICU_EOI,%al ;	/* as soon as possible send EOI ... */ \
	OUTB_ICU1		/* ... to clear in service bit */
#define	OUTB_ICU1 \
	outb	%al,$IO_ICU1
#endif

#ifdef AUTO_EOI_2
/*
 * The data sheet says no auto-EOI on slave, but it sometimes works.
 */
#define	ENABLE_ICU1_AND_2	ENABLE_ICU1
#else
#define	ENABLE_ICU1_AND_2 \
	movb	$ICU_EOI,%al ;	/* as above */ \
	outb	%al,$IO_ICU2 ;	/* but do second icu first ... */ \
	OUTB_ICU1		/* ... then first icu (if !AUTO_EOI_1) */
#endif

/*
 * Macros for interrupt interrupt entry, call to handler, and exit.
 */

#define	FAST_INTR(irq_num, vec_name, enable_icus) \
	.text ; \
	SUPERALIGN_TEXT ; \
IDTVEC(vec_name) ; \
	pushl	%eax ;		/* save only call-used registers */ \
	pushl	%ecx ; \
	pushl	%edx ; \
	pushl	%ds ; \
	MAYBE_PUSHL_ES ; \
	mov	$KDSEL,%ax ; \
	mov	%ax,%ds ; \
	MAYBE_MOVW_AX_ES ; \
	FAKE_MCOUNT((4+ACTUALLY_PUSHED)*4(%esp)) ; \
	pushl	_intr_unit + (irq_num) * 4 ; \
	call	*_intr_handler + (irq_num) * 4 ; /* do the work ASAP */ \
	enable_icus ;		/* (re)enable ASAP (helps edge trigger?) */ \
	addl	$4,%esp ; \
	incl	_cnt+V_INTR ;	/* book-keeping can wait */ \
	movl	_intr_countp + (irq_num) * 4,%eax ; \
	incl	(%eax) ; \
	movl	_cpl,%eax ;	/* are we unmasking pending HWIs or SWIs? */ \
	notl	%eax ; \
	andl	_ipending,%eax ; \
	jne	2f ; 		/* yes, maybe handle them */ \
1: ; \
	MEXITCOUNT ; \
	MAYBE_POPL_ES ; \
	popl	%ds ; \
	popl	%edx ; \
	popl	%ecx ; \
	popl	%eax ; \
	iret ; \
; \
	ALIGN_TEXT ; \
2: ; \
	cmpb	$3,_intr_nesting_level ;	/* is there enough stack? */ \
	jae	1b ;		/* no, return */ \
	movl	_cpl,%eax ; \
	/* XXX next line is probably unnecessary now. */ \
	movl	$HWI_MASK|SWI_MASK,_cpl ;	/* limit nesting ... */ \
	incb	_intr_nesting_level ;	/* ... really limit it ... */ \
	sti ;			/* ... to do this as early as possible */ \
	MAYBE_POPL_ES ;		/* discard most of thin frame ... */ \
	popl	%ecx ;		/* ... original %ds ... */ \
	popl	%edx ; \
	xchgl	%eax,4(%esp) ;	/* orig %eax; save cpl */ \
	pushal ;		/* build fat frame (grrr) ... */ \
	pushl	%ecx ;		/* ... actually %ds ... */ \
	pushl	%es ; \
	pushl	%fs ; \
	mov	$KDSEL,%ax ; \
	mov	%ax,%es ; \
	mov	%ax,%fs ; \
	movl	(3+8+0)*4(%esp),%ecx ;	/* ... %ecx from thin frame ... */ \
	movl	%ecx,(3+6)*4(%esp) ;	/* ... to fat frame ... */ \
	movl	(3+8+1)*4(%esp),%eax ;	/* ... cpl from thin frame */ \
	pushl	%eax ; \
	subl	$4,%esp ;	/* junk for unit number */ \
	MEXITCOUNT ; \
	jmp	_doreti

#define	INTR(irq_num, vec_name, icu, enable_icus, reg, maybe_extra_ipending) \
	.text ; \
	SUPERALIGN_TEXT ; \
IDTVEC(vec_name) ; \
	pushl	$0 ;		/* dummy error code */ \
	pushl	$0 ;		/* dummy trap type */ \
	pushal ; \
	pushl	%ds ;		/* save our data and extra segments ... */ \
	pushl	%es ; \
	pushl	%fs ; \
	mov	$KDSEL,%ax ;	/* ... and reload with kernel's own ... */ \
	mov	%ax,%ds ;	/* ... early for obsolete reasons */ \
	mov	%ax,%es ; \
	mov	%ax,%fs ; \
	maybe_extra_ipending ; \
	movb	_imen + IRQ_BYTE(irq_num),%al ; \
	orb	$IRQ_BIT(irq_num),%al ; \
	movb	%al,_imen + IRQ_BYTE(irq_num) ; \
	outb	%al,$icu+ICU_IMR_OFFSET ; \
	enable_icus ; \
	movl	_cpl,%eax ; \
	testb	$IRQ_BIT(irq_num),%reg ; \
	jne	2f ; \
	incb	_intr_nesting_level ; \
__CONCAT(Xresume,irq_num): ; \
	FAKE_MCOUNT(13*4(%esp)) ;	/* XXX late to avoid double count */ \
	incl	_cnt+V_INTR ;	/* tally interrupts */ \
	movl	_intr_countp + (irq_num) * 4,%eax ; \
	incl	(%eax) ; \
	movl	_cpl,%eax ; \
	pushl	%eax ; \
	pushl	_intr_unit + (irq_num) * 4 ; \
	orl	_intr_mask + (irq_num) * 4,%eax ; \
	movl	%eax,_cpl ; \
	sti ; \
	call	*_intr_handler + (irq_num) * 4 ; \
	cli ;			/* must unmask _imen and icu atomically */ \
	movb	_imen + IRQ_BYTE(irq_num),%al ; \
	andb	$~IRQ_BIT(irq_num),%al ; \
	movb	%al,_imen + IRQ_BYTE(irq_num) ; \
	outb	%al,$icu+ICU_IMR_OFFSET ; \
	sti ;			/* XXX _doreti repeats the cli/sti */ \
	MEXITCOUNT ; \
	/* We could usually avoid the following jmp by inlining some of */ \
	/* _doreti, but it's probably better to use less cache. */ \
	jmp	_doreti ; \
; \
	ALIGN_TEXT ; \
2: ; \
	/* XXX skip mcounting here to avoid double count */ \
	orb	$IRQ_BIT(irq_num),_ipending + IRQ_BYTE(irq_num) ; \
	popl	%fs ; \
	popl	%es ; \
	popl	%ds ; \
	popal ; \
	addl	$4+4,%esp ; \
	iret

MCOUNT_LABEL(bintr)
	FAST_INTR(0,fastintr0, ENABLE_ICU1)
	FAST_INTR(1,fastintr1, ENABLE_ICU1)
	FAST_INTR(2,fastintr2, ENABLE_ICU1)
	FAST_INTR(3,fastintr3, ENABLE_ICU1)
	FAST_INTR(4,fastintr4, ENABLE_ICU1)
	FAST_INTR(5,fastintr5, ENABLE_ICU1)
	FAST_INTR(6,fastintr6, ENABLE_ICU1)
	FAST_INTR(7,fastintr7, ENABLE_ICU1)
	FAST_INTR(8,fastintr8, ENABLE_ICU1_AND_2)
	FAST_INTR(9,fastintr9, ENABLE_ICU1_AND_2)
	FAST_INTR(10,fastintr10, ENABLE_ICU1_AND_2)
	FAST_INTR(11,fastintr11, ENABLE_ICU1_AND_2)
	FAST_INTR(12,fastintr12, ENABLE_ICU1_AND_2)
	FAST_INTR(13,fastintr13, ENABLE_ICU1_AND_2)
	FAST_INTR(14,fastintr14, ENABLE_ICU1_AND_2)
	FAST_INTR(15,fastintr15, ENABLE_ICU1_AND_2)
#define	CLKINTR_PENDING	movl $1,CNAME(clkintr_pending)
	INTR(0,intr0, IO_ICU1, ENABLE_ICU1, al, CLKINTR_PENDING)
	INTR(1,intr1, IO_ICU1, ENABLE_ICU1, al,)
	INTR(2,intr2, IO_ICU1, ENABLE_ICU1, al,)
	INTR(3,intr3, IO_ICU1, ENABLE_ICU1, al,)
	INTR(4,intr4, IO_ICU1, ENABLE_ICU1, al,)
	INTR(5,intr5, IO_ICU1, ENABLE_ICU1, al,)
	INTR(6,intr6, IO_ICU1, ENABLE_ICU1, al,)
	INTR(7,intr7, IO_ICU1, ENABLE_ICU1, al,)
	INTR(8,intr8, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
	INTR(9,intr9, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
	INTR(10,intr10, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
	INTR(11,intr11, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
	INTR(12,intr12, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
	INTR(13,intr13, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
	INTR(14,intr14, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
	INTR(15,intr15, IO_ICU2, ENABLE_ICU1_AND_2, ah,)
MCOUNT_LABEL(eintr)

	.data
	.globl	_ihandlers
_ihandlers:			/* addresses of interrupt handlers */
				/* actually resumption addresses for HWI's */
	.long	Xresume0, Xresume1, Xresume2, Xresume3 
	.long	Xresume4, Xresume5, Xresume6, Xresume7
	.long	Xresume8, Xresume9, Xresume10, Xresume11
	.long	Xresume12, Xresume13, Xresume14, Xresume15 
	.long	_swi_null, swi_net, _swi_null, _swi_null
	.long	_swi_vm, _swi_null, _swi_null, _swi_null
	.long	_swi_null, _swi_null, _swi_null, _swi_null
	.long	_swi_null, _swi_null, _softclock, _swi_null

imasks:				/* masks for interrupt handlers */
	.space	NHWI*4		/* padding; HWI masks are elsewhere */

	.long	SWI_TTY_MASK, SWI_NET_MASK, SWI_CAMNET_MASK, SWI_CAMBIO_MASK
	.long	SWI_VM_MASK, 0, 0, 0
	.long	0, 0, 0, 0
	.long	0, 0, SWI_CLOCK_MASK, 0

	.text