d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0089e0c430
freebsd-nq/sys/dev/ed/if_ed_pccard.c
Marius Strobl 3fcb7a5365 - Remove attempts to implement setting of BMCR_LOOP/MIIF_NOLOOP 
(reporting IFM_LOOP based on BMCR_LOOP is left in place though as
  it might provide useful for debugging). For most mii(4) drivers it
  was unclear whether the PHYs driven by them actually support
  loopback or not. Moreover, typically loopback mode also needs to
  be activated on the MAC, which none of the Ethernet drivers using
  mii(4) implements. Given that loopback media has no real use (and
  obviously hardly had a chance to actually work) besides for driver
  development (which just loopback mode should be sufficient for
  though, i.e one doesn't necessary need support for loopback media)
  support for it is just dropped as both NetBSD and OpenBSD already
  did quite some time ago.
- Let mii_phy_add_media() also announce the support of IFM_NONE.
- Restructure the PHY entry points to use a structure of entry points
  instead of discrete function pointers, and extend this to include
  a "reset" entry point. Make sure any PHY-specific reset routine is
  always used, and provide one for lxtphy(4) which disables MII
  interrupts (as is done for a few other PHYs we have drivers for).
  This includes changing NIC drivers which previously just called the
  generic mii_phy_reset() to now actually call the PHY-specific reset
  routine, which might be crucial in some cases. While at it, the
  redundant checks in these NIC drivers for mii->mii_instance not being
  zero before calling the reset routines were removed because as soon
  as one PHY driver attaches mii->mii_instance is incremented and we
  hardly can end up in their media change callbacks etc if no PHY driver
  has attached as mii_attach() would have failed in that case and not
  attach a miibus(4) instance.
  Consequently, NIC drivers now no longer should call mii_phy_reset()
  directly, so it was removed from EXPORT_SYMS.
- Add a mii_phy_dev_attach() as a companion helper to mii_phy_dev_probe().
  The purpose of that function is to perform the common steps to attach
  a PHY driver instance and to hook it up to the miibus(4) instance and to
  optionally also handle the probing, addition and initialization of the
  supported media. So all a PHY driver without any special requirements
  has to do in its bus attach method is to call mii_phy_dev_attach()
  along with PHY-specific MIIF_* flags, a pointer to its PHY functions
  and the add_media set to one. All PHY drivers were updated to take
  advantage of mii_phy_dev_attach() as appropriate. Along with these
  changes the capability mask was added to the mii_softc structure so
  PHY drivers taking advantage of mii_phy_dev_attach() but still
  handling media on their own do not need to fiddle with the MII attach
  arguments anyway.
- Keep track of the PHY offset in the mii_softc structure. This is done
  for compatibility with NetBSD/OpenBSD.
- Keep track of the PHY's OUI, model and revision in the mii_softc
  structure. Several PHY drivers require this information also after
  attaching and previously had to wrap their own softc around mii_softc.
  NetBSD/OpenBSD also keep track of the model and revision on their
  mii_softc structure. All PHY drivers were updated to take advantage
  as appropriate.
- Convert the mebers of the MII data structure to unsigned where
  appropriate. This is partly inspired by NetBSD/OpenBSD.
- According to IEEE 802.3-2002 the bits actually have to be reversed
  when mapping an OUI to the MII ID registers. All PHY drivers and
  miidevs where changed as necessary. Actually this now again allows to
  largely share miidevs with NetBSD, which fixed this problem already
  9 years ago. Consequently miidevs was synced as far as possible.
- Add MIIF_NOMANPAUSE and mii_phy_flowstatus() calls to drivers that
  weren't explicitly converted to support flow control before. It's
  unclear whether flow control actually works with these but typically
  it should and their net behavior should be more correct with these
  changes in place than without if the MAC driver sets MIIF_DOPAUSE.

Obtained from:	NetBSD (partially)
Reviewed by:	yongari (earlier version), silence on arch@ and net@
2011-05-03 19:51:29 +00:00

1241 lines
37 KiB
C
Raw Blame History

/*-
* Copyright (c) 2005, M. Warner Losh
* Copyright (c) 1995, David Greenman
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Notes for adding media support. Each chipset is somewhat different
* from the others. Linux has a table of OIDs that it uses to see what
* supports the misc register of the NS83903. But a sampling of datasheets
* I could dig up on cards I own paints a different picture.
*
* Chipset specific details:
* NS 83903/902A paired
* ccr base 0x1020
* id register at 0x1000: 7-3 = 0, 2-0 = 1.
* (maybe this test is too week)
* misc register at 0x018:
* 6 WAIT_TOUTENABLE enable watchdog timeout
* 3 AUI/TPI 1 AUX, 0 TPI
* 2 loopback
* 1 gdlink (tpi mode only) 1 tp good, 0 tp bad
* 0 0-no mam, 1 mam connected
*
* NS83926 appears to be a NS pcmcia glue chip used on the IBM Ethernet II
* and the NEC PC9801N-J12 ccr base 0x2000!
*
* winbond 289c926
* ccr base 0xfd0
* cfb (am 0xff2):
* 0-1 PHY01 00 TPI, 01 10B2, 10 10B5, 11 TPI (reduced squ)
* 2 LNKEN 0 - enable link and auto switch, 1 disable
* 3 LNKSTS TPI + LNKEN=0 + link good == 1, else 0
* sr (am 0xff4)
* 88 00 88 00 88 00, etc
*
* TMI tc3299a (cr PHY01 == 0)
* ccr base 0x3f8
* cra (io 0xa)
* crb (io 0xb)
* 0-1 PHY01 00 auto, 01 res, 10 10B5, 11 TPI
* 2 GDLINK 1 disable checking of link
* 6 LINK 0 bad link, 1 good link
*
* EN5017A, EN5020 no data, but very popular
* Other chips?
* NetBSD supports RTL8019, but none have surfaced that I can see
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/socket.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/uio.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/if_mib.h>
#include <net/if_media.h>
#include <dev/ed/if_edreg.h>
#include <dev/ed/if_edvar.h>
#include <dev/ed/ax88x90reg.h>
#include <dev/ed/dl100xxreg.h>
#include <dev/ed/tc5299jreg.h>
#include <dev/pccard/pccardvar.h>
#include <dev/pccard/pccardreg.h>
#include <dev/pccard/pccard_cis.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "card_if.h"
/* "device miibus" required. See GENERIC if you get errors here. */
#include "miibus_if.h"
#include "pccarddevs.h"
/*
* NE-2000 based PC Cards have a number of ways to get the MAC address.
* Some cards encode this as a FUNCE. Others have this in the ROMs the
* same way that ISA cards do. Some have it encoded in the attribute
* memory somewhere that isn't in the CIS. Some new chipsets have it
* in special registers in the ASIC part of the chip.
*
* For those cards that have the MAC adress stored in attribute memory
* outside of a FUNCE entry in the CIS, nearly all of them have it at
* a fixed offset (0xff0). We use that offset as a source of last
* resource if other offsets have failed. This is the address of the
* National Semiconductor DP83903A, which is the only chip's datasheet
* I've found.
*/
#define ED_DEFAULT_MAC_OFFSET 0xff0
static const struct ed_product {
struct pccard_product prod;
int flags;
#define NE2000DVF_DL100XX 0x0001 /* chip is D-Link DL10019/22 */
#define NE2000DVF_AX88X90 0x0002 /* chip is ASIX AX88[17]90 */
#define NE2000DVF_TC5299J 0x0004 /* chip is Tamarack TC5299J */
#define NE2000DVF_TOSHIBA 0x0008 /* Toshiba DP83902A */
#define NE2000DVF_ENADDR 0x0100 /* Get MAC from attr mem */
#define NE2000DVF_ANYFUNC 0x0200 /* Allow any function type */
#define NE2000DVF_MODEM 0x0400 /* Has a modem/serial */
int enoff;
} ed_pccard_products[] = {
{ PCMCIA_CARD(ACCTON, EN2212), 0},
{ PCMCIA_CARD(ACCTON, EN2216), 0},
{ PCMCIA_CARD(ALLIEDTELESIS, LA_PCM), 0},
{ PCMCIA_CARD(AMBICOM, AMB8002), 0},
{ PCMCIA_CARD(AMBICOM, AMB8002T), 0},
{ PCMCIA_CARD(AMBICOM, AMB8010), 0},
{ PCMCIA_CARD(AMBICOM, AMB8010_ALT), 0},
{ PCMCIA_CARD(AMBICOM, AMB8610), 0},
{ PCMCIA_CARD(BILLIONTON, CFLT10N), 0},
{ PCMCIA_CARD(BILLIONTON, LNA100B), NE2000DVF_AX88X90},
{ PCMCIA_CARD(BILLIONTON, LNT10TB), 0},
{ PCMCIA_CARD(BILLIONTON, LNT10TN), 0},
{ PCMCIA_CARD(BROMAX, AXNET), NE2000DVF_AX88X90},
{ PCMCIA_CARD(BROMAX, IPORT), 0},
{ PCMCIA_CARD(BROMAX, IPORT2), 0},
{ PCMCIA_CARD(BUFFALO, LPC2_CLT), 0},
{ PCMCIA_CARD(BUFFALO, LPC3_CLT), 0},
{ PCMCIA_CARD(BUFFALO, LPC3_CLX), NE2000DVF_AX88X90},
{ PCMCIA_CARD(BUFFALO, LPC4_TX), NE2000DVF_AX88X90},
{ PCMCIA_CARD(BUFFALO, LPC4_CLX), NE2000DVF_AX88X90},
{ PCMCIA_CARD(BUFFALO, LPC_CF_CLT), 0},
{ PCMCIA_CARD(CNET, NE2000), 0},
{ PCMCIA_CARD(COMPEX, AX88190), NE2000DVF_AX88X90},
{ PCMCIA_CARD(COMPEX, LANMODEM), 0},
{ PCMCIA_CARD(COMPEX, LINKPORT_ENET_B), 0},
{ PCMCIA_CARD(COREGA, ETHER_II_PCC_T), 0},
{ PCMCIA_CARD(COREGA, ETHER_II_PCC_TD), 0},
{ PCMCIA_CARD(COREGA, ETHER_PCC_T), 0},
{ PCMCIA_CARD(COREGA, ETHER_PCC_TD), 0},
{ PCMCIA_CARD(COREGA, FAST_ETHER_PCC_TX), NE2000DVF_DL100XX},
{ PCMCIA_CARD(COREGA, FETHER_PCC_TXD), NE2000DVF_AX88X90},
{ PCMCIA_CARD(COREGA, FETHER_PCC_TXF), NE2000DVF_DL100XX},
{ PCMCIA_CARD(COREGA, FETHER_II_PCC_TXD), NE2000DVF_AX88X90},
{ PCMCIA_CARD(COREGA, LAPCCTXD), 0},
{ PCMCIA_CARD(DAYNA, COMMUNICARD_E_1), 0},
{ PCMCIA_CARD(DAYNA, COMMUNICARD_E_2), 0},
{ PCMCIA_CARD(DLINK, DE650), NE2000DVF_ANYFUNC },
{ PCMCIA_CARD(DLINK, DE660), 0 },
{ PCMCIA_CARD(DLINK, DE660PLUS), 0},
{ PCMCIA_CARD(DYNALINK, L10C), 0},
{ PCMCIA_CARD(EDIMAX, EP4000A), 0},
{ PCMCIA_CARD(EPSON, EEN10B), 0},
{ PCMCIA_CARD(EXP, THINLANCOMBO), 0},
{ PCMCIA_CARD(GLOBALVILLAGE, LANMODEM), 0},
{ PCMCIA_CARD(GREY_CELL, TDK3000), 0},
{ PCMCIA_CARD(GREY_CELL, DMF650TX),
NE2000DVF_ANYFUNC | NE2000DVF_DL100XX | NE2000DVF_MODEM},
{ PCMCIA_CARD(GVC, NIC_2000P), 0},
{ PCMCIA_CARD(IBM, HOME_AND_AWAY), 0},
{ PCMCIA_CARD(IBM, INFOMOVER), 0},
{ PCMCIA_CARD(IODATA3, PCLAT), 0},
{ PCMCIA_CARD(KINGSTON, CIO10T), 0},
{ PCMCIA_CARD(KINGSTON, KNE2), 0},
{ PCMCIA_CARD(LANTECH, FASTNETTX), NE2000DVF_AX88X90},
/* Same ID for many different cards, including generic NE2000 */
{ PCMCIA_CARD(LINKSYS, COMBO_ECARD),
NE2000DVF_DL100XX | NE2000DVF_AX88X90},
{ PCMCIA_CARD(LINKSYS, ECARD_1), 0},
{ PCMCIA_CARD(LINKSYS, ECARD_2), 0},
{ PCMCIA_CARD(LINKSYS, ETHERFAST), NE2000DVF_DL100XX},
{ PCMCIA_CARD(LINKSYS, TRUST_COMBO_ECARD), 0},
{ PCMCIA_CARD(MACNICA, ME1_JEIDA), 0},
{ PCMCIA_CARD(MAGICRAM, ETHER), 0},
{ PCMCIA_CARD(MELCO, LPC3_CLX), NE2000DVF_AX88X90},
{ PCMCIA_CARD(MELCO, LPC3_TX), NE2000DVF_AX88X90},
{ PCMCIA_CARD(MELCO2, LPC2_T), 0},
{ PCMCIA_CARD(MELCO2, LPC2_TX), 0},
{ PCMCIA_CARD(MITSUBISHI, B8895), NE2000DVF_ANYFUNC}, /* NG */
{ PCMCIA_CARD(MICRORESEARCH, MR10TPC), 0},
{ PCMCIA_CARD(NDC, ND5100_E), 0},
{ PCMCIA_CARD(NETGEAR, FA410TXC), NE2000DVF_DL100XX},
/* Same ID as DLINK DFE-670TXD. 670 has DL10022, fa411 has ax88790 */
{ PCMCIA_CARD(NETGEAR, FA411), NE2000DVF_AX88X90 | NE2000DVF_DL100XX},
{ PCMCIA_CARD(NEXTCOM, NEXTHAWK), 0},
{ PCMCIA_CARD(NEWMEDIA, LANSURFER), NE2000DVF_ANYFUNC},
{ PCMCIA_CARD(NEWMEDIA, LIVEWIRE), 0},
{ PCMCIA_CARD(OEM2, 100BASE), NE2000DVF_AX88X90},
{ PCMCIA_CARD(OEM2, ETHERNET), 0},
{ PCMCIA_CARD(OEM2, FAST_ETHERNET), NE2000DVF_AX88X90},
{ PCMCIA_CARD(OEM2, NE2000), 0},
{ PCMCIA_CARD(PLANET, SMARTCOM2000), 0 },
{ PCMCIA_CARD(PREMAX, PE200), 0},
{ PCMCIA_CARD(PSION, LANGLOBAL),
NE2000DVF_ANYFUNC | NE2000DVF_AX88X90 | NE2000DVF_MODEM},
{ PCMCIA_CARD(RACORE, ETHERNET), 0},
{ PCMCIA_CARD(RACORE, FASTENET), NE2000DVF_AX88X90},
{ PCMCIA_CARD(RACORE, 8041TX), NE2000DVF_AX88X90 | NE2000DVF_TC5299J},
{ PCMCIA_CARD(RELIA, COMBO), 0},
{ PCMCIA_CARD(RIOS, PCCARD3), 0},
{ PCMCIA_CARD(RPTI, EP400), 0},
{ PCMCIA_CARD(RPTI, EP401), 0},
{ PCMCIA_CARD(SMC, EZCARD), 0},
{ PCMCIA_CARD(SOCKET, EA_ETHER), 0},
{ PCMCIA_CARD(SOCKET, ES_1000), 0},
{ PCMCIA_CARD(SOCKET, LP_ETHER), 0},
{ PCMCIA_CARD(SOCKET, LP_ETHER_CF), 0},
{ PCMCIA_CARD(SOCKET, LP_ETH_10_100_CF), NE2000DVF_DL100XX},
{ PCMCIA_CARD(SVEC, COMBOCARD), 0},
{ PCMCIA_CARD(SVEC, LANCARD), 0},
{ PCMCIA_CARD(TAMARACK, ETHERNET), 0},
{ PCMCIA_CARD(TDK, CFE_10), 0},
{ PCMCIA_CARD(TDK, LAK_CD031), 0},
{ PCMCIA_CARD(TDK, DFL5610WS), 0},
{ PCMCIA_CARD(TELECOMDEVICE, LM5LT), 0 },
{ PCMCIA_CARD(TELECOMDEVICE, TCD_HPC100), NE2000DVF_AX88X90},
{ PCMCIA_CARD(TJ, PTJ_LAN_T), 0 },
{ PCMCIA_CARD(TOSHIBA2, LANCT00A), NE2000DVF_ANYFUNC | NE2000DVF_TOSHIBA},
{ PCMCIA_CARD(ZONET, ZEN), 0},
{ { NULL } }
};
/*
* PC Card (PCMCIA) specific code.
*/
static int ed_pccard_probe(device_t);
static int ed_pccard_attach(device_t);
static void ed_pccard_tick(struct ed_softc *);
static int ed_pccard_dl100xx(device_t dev, const struct ed_product *);
static void ed_pccard_dl100xx_mii_reset(struct ed_softc *sc);
static u_int ed_pccard_dl100xx_mii_readbits(struct ed_softc *sc, int nbits);
static void ed_pccard_dl100xx_mii_writebits(struct ed_softc *sc, u_int val,
int nbits);
static int ed_pccard_ax88x90(device_t dev, const struct ed_product *);
static u_int ed_pccard_ax88x90_mii_readbits(struct ed_softc *sc, int nbits);
static void ed_pccard_ax88x90_mii_writebits(struct ed_softc *sc, u_int val,
int nbits);
static int ed_miibus_readreg(device_t dev, int phy, int reg);
static int ed_ifmedia_upd(struct ifnet *);
static void ed_ifmedia_sts(struct ifnet *, struct ifmediareq *);
static int ed_pccard_tc5299j(device_t dev, const struct ed_product *);
static u_int ed_pccard_tc5299j_mii_readbits(struct ed_softc *sc, int nbits);
static void ed_pccard_tc5299j_mii_writebits(struct ed_softc *sc, u_int val,
int nbits);
static void
ed_pccard_print_entry(const struct ed_product *pp)
{
int i;
printf("Product entry: ");
if (pp->prod.pp_name)
printf("name='%s',", pp->prod.pp_name);
printf("vendor=%#x,product=%#x", pp->prod.pp_vendor,
pp->prod.pp_product);
for (i = 0; i < 4; i++)
if (pp->prod.pp_cis[i])
printf(",CIS%d='%s'", i, pp->prod.pp_cis[i]);
printf("\n");
}
static int
ed_pccard_probe(device_t dev)
{
const struct ed_product *pp, *pp2;
int error, first = 1;
uint32_t fcn = PCCARD_FUNCTION_UNSPEC;
/* Make sure we're a network function */
error = pccard_get_function(dev, &fcn);
if (error != 0)
return (error);
if ((pp = (const struct ed_product *) pccard_product_lookup(dev,
(const struct pccard_product *) ed_pccard_products,
sizeof(ed_pccard_products[0]), NULL)) != NULL) {
if (pp->prod.pp_name != NULL)
device_set_desc(dev, pp->prod.pp_name);
/*
* Some devices don't ID themselves as network, but
* that's OK if the flags say so.
*/
if (!(pp->flags & NE2000DVF_ANYFUNC) &&
fcn != PCCARD_FUNCTION_NETWORK)
return (ENXIO);
/*
* Some devices match multiple entries. Report that
* as a warning to help cull the table
*/
pp2 = pp;
while ((pp2 = (const struct ed_product *)pccard_product_lookup(
dev, (const struct pccard_product *)(pp2 + 1),
sizeof(ed_pccard_products[0]), NULL)) != NULL) {
if (first) {
device_printf(dev,
"Warning: card matches multiple entries. Report to imp@freebsd.org\n");
ed_pccard_print_entry(pp);
first = 0;
}
ed_pccard_print_entry(pp2);
}
return (0);
}
return (ENXIO);
}
static int
ed_pccard_rom_mac(device_t dev, uint8_t *enaddr)
{
struct ed_softc *sc = device_get_softc(dev);
uint8_t romdata[32], sum;
int i;
/*
* Read in the rom data at location 0. Since there are no
* NE-1000 based PC Card devices, we'll assume we're 16-bit.
*
* In researching what format this takes, I've found that the
* following appears to be true for multiple cards based on
* observation as well as datasheet digging.
*
* Data is stored in some ROM and is copied out 8 bits at a time
* into 16-bit wide locations. This means that the odd locations
* of the ROM are not used (and can be either 0 or ff).
*
* The contents appears to be as follows:
* PROM RAM
* Offset Offset What
* 0 0 ENETADDR 0
* 1 2 ENETADDR 1
* 2 4 ENETADDR 2
* 3 6 ENETADDR 3
* 4 8 ENETADDR 4
* 5 10 ENETADDR 5
* 6-13 12-26 Reserved (varies by manufacturer)
* 14 28 0x57
* 15 30 0x57
*
* Some manufacturers have another image of enetaddr from
* PROM offset 0x10 to 0x15 with 0x42 in 0x1e and 0x1f, but
* this doesn't appear to be universally documented in the
* datasheets. Some manufactuers have a card type, card config
* checksums, etc encoded into PROM offset 6-13, but deciphering it
* requires more knowledge about the exact underlying chipset than
* we possess (and maybe can possess).
*/
ed_pio_readmem(sc, 0, romdata, 32);
if (bootverbose)
device_printf(dev, "ROM DATA: %32D\n", romdata, " ");
if (romdata[28] != 0x57 || romdata[30] != 0x57)
return (0);
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= romdata[i * 2];
if (sum == 0)
return (0);
for (i = 0; i < ETHER_ADDR_LEN; i++)
enaddr[i] = romdata[i * 2];
return (1);
}
static int
ed_pccard_add_modem(device_t dev)
{
device_printf(dev, "Need to write this code\n");
return 0;
}
static int
ed_pccard_kick_phy(struct ed_softc *sc)
{
struct mii_softc *miisc;
struct mii_data *mii;
mii = device_get_softc(sc->miibus);
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
PHY_RESET(miisc);
return (mii_mediachg(mii));
}
static int
ed_pccard_media_ioctl(struct ed_softc *sc, struct ifreq *ifr, u_long command)
{
struct mii_data *mii;
if (sc->miibus == NULL)
return (EINVAL);
mii = device_get_softc(sc->miibus);
return (ifmedia_ioctl(sc->ifp, ifr, &mii->mii_media, command));
}
static void
ed_pccard_mediachg(struct ed_softc *sc)
{
struct mii_data *mii;
if (sc->miibus == NULL)
return;
mii = device_get_softc(sc->miibus);
mii_mediachg(mii);
}
static int
ed_pccard_attach(device_t dev)
{
u_char sum;
u_char enaddr[ETHER_ADDR_LEN];
const struct ed_product *pp;
int error, i, flags, port_rid, modem_rid;
struct ed_softc *sc = device_get_softc(dev);
u_long size;
static uint16_t *intr_vals[] = {NULL, NULL};
sc->dev = dev;
if ((pp = (const struct ed_product *) pccard_product_lookup(dev,
(const struct pccard_product *) ed_pccard_products,
sizeof(ed_pccard_products[0]), NULL)) == NULL) {
printf("Can't find\n");
return (ENXIO);
}
modem_rid = port_rid = -1;
if (pp->flags & NE2000DVF_MODEM) {
for (i = 0; i < 4; i++) {
size = bus_get_resource_count(dev, SYS_RES_IOPORT, i);
if (size == ED_NOVELL_IO_PORTS)
port_rid = i;
else if (size == 8)
modem_rid = i;
}
if (port_rid == -1) {
device_printf(dev, "Cannot locate my ports!\n");
return (ENXIO);
}
} else {
port_rid = 0;
}
/* Allocate the port resource during setup. */
error = ed_alloc_port(dev, port_rid, ED_NOVELL_IO_PORTS);
if (error) {
printf("alloc_port failed\n");
return (error);
}
if (rman_get_size(sc->port_res) == ED_NOVELL_IO_PORTS / 2) {
port_rid++;
sc->port_res2 = bus_alloc_resource(dev, SYS_RES_IOPORT,
&port_rid, 0ul, ~0ul, 1, RF_ACTIVE);
if (sc->port_res2 == NULL ||
rman_get_size(sc->port_res2) != ED_NOVELL_IO_PORTS / 2) {
error = ENXIO;
goto bad;
}
}
error = ed_alloc_irq(dev, 0, 0);
if (error)
goto bad;
/*
* Determine which chipset we are. Almost all the PC Card chipsets
* have the Novel ASIC and NIC offsets. There's 2 known cards that
* follow the WD80x3 conventions, which are handled as a special case.
*/
sc->asic_offset = ED_NOVELL_ASIC_OFFSET;
sc->nic_offset = ED_NOVELL_NIC_OFFSET;
error = ENXIO;
flags = device_get_flags(dev);
if (error != 0)
error = ed_pccard_dl100xx(dev, pp);
if (error != 0)
error = ed_pccard_ax88x90(dev, pp);
if (error != 0)
error = ed_pccard_tc5299j(dev, pp);
if (error != 0) {
error = ed_probe_Novell_generic(dev, flags);
printf("Novell probe generic %d\n", error);
}
if (error != 0 && (pp->flags & NE2000DVF_TOSHIBA)) {
flags |= ED_FLAGS_TOSH_ETHER;
flags |= ED_FLAGS_PCCARD;
sc->asic_offset = ED_WD_ASIC_OFFSET;
sc->nic_offset = ED_WD_NIC_OFFSET;
error = ed_probe_WD80x3_generic(dev, flags, intr_vals);
}
if (error)
goto bad;
/*
* There are several ways to get the MAC address for the card.
* Some of the above probe routines can fill in the enaddr. If
* not, we run through a number of 'well known' locations:
* (1) From the PC Card FUNCE
* (2) From offset 0 in the shared memory
* (3) From a hinted offset in attribute memory
* (4) From 0xff0 in attribute memory
* If we can't get a non-zero MAC address from this list, we fail.
*/
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= sc->enaddr[i];
if (sum == 0) {
pccard_get_ether(dev, enaddr);
if (bootverbose)
device_printf(dev, "CIS MAC %6D\n", enaddr, ":");
for (i = 0, sum = 0; i < ETHER_ADDR_LEN; i++)
sum |= enaddr[i];
if (sum == 0 && ed_pccard_rom_mac(dev, enaddr)) {
if (bootverbose)
device_printf(dev, "ROM mac %6D\n", enaddr,
":");
sum++;
}
if (sum == 0 && pp->flags & NE2000DVF_ENADDR) {
for (i = 0; i < ETHER_ADDR_LEN; i++) {
pccard_attr_read_1(dev, pp->enoff + i * 2,
enaddr + i);
sum |= enaddr[i];
}
if (bootverbose)
device_printf(dev, "Hint %x MAC %6D\n",
pp->enoff, enaddr, ":");
}
if (sum == 0) {
for (i = 0; i < ETHER_ADDR_LEN; i++) {
pccard_attr_read_1(dev, ED_DEFAULT_MAC_OFFSET +
i * 2, enaddr + i);
sum |= enaddr[i];
}
if (bootverbose)
device_printf(dev, "Fallback MAC %6D\n",
enaddr, ":");
}
if (sum == 0) {
device_printf(dev, "Cannot extract MAC address.\n");
ed_release_resources(dev);
return (ENXIO);
}
bcopy(enaddr, sc->enaddr, ETHER_ADDR_LEN);
}
error = ed_attach(dev);
if (error)
goto bad;
if (sc->chip_type == ED_CHIP_TYPE_DL10019 ||
sc->chip_type == ED_CHIP_TYPE_DL10022) {
/* Try to attach an MII bus, but ignore errors. */
ed_pccard_dl100xx_mii_reset(sc);
(void)mii_attach(dev, &sc->miibus, sc->ifp, ed_ifmedia_upd,
ed_ifmedia_sts, BMSR_DEFCAPMASK, MII_PHY_ANY,
MII_OFFSET_ANY, MIIF_FORCEANEG);
} else if (sc->chip_type == ED_CHIP_TYPE_AX88190 ||
sc->chip_type == ED_CHIP_TYPE_AX88790 ||
sc->chip_type == ED_CHIP_TYPE_TC5299J) {
error = mii_attach(dev, &sc->miibus, sc->ifp, ed_ifmedia_upd,
ed_ifmedia_sts, BMSR_DEFCAPMASK, MII_PHY_ANY,
MII_OFFSET_ANY, MIIF_FORCEANEG);
if (error != 0) {
device_printf(dev, "attaching PHYs failed\n");
goto bad;
}
}
if (sc->miibus != NULL) {
sc->sc_tick = ed_pccard_tick;
sc->sc_mediachg = ed_pccard_mediachg;
sc->sc_media_ioctl = ed_pccard_media_ioctl;
ed_pccard_kick_phy(sc);
} else {
ed_gen_ifmedia_init(sc);
}
if (modem_rid != -1)
ed_pccard_add_modem(dev);
error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET | INTR_MPSAFE,
NULL, edintr, sc, &sc->irq_handle);
if (error) {
device_printf(dev, "setup intr failed %d \n", error);
goto bad;
}
return (0);
bad:
ed_detach(dev);
return (error);
}
/*
* Probe the Ethernet MAC addrees for PCMCIA Linksys EtherFast 10/100
* and compatible cards (DL10019C Ethernet controller).
*/
static int
ed_pccard_dl100xx(device_t dev, const struct ed_product *pp)
{
struct ed_softc *sc = device_get_softc(dev);
u_char sum;
uint8_t id;
u_int memsize;
int i, error;
if (!(pp->flags & NE2000DVF_DL100XX))
return (ENXIO);
if (bootverbose)
device_printf(dev, "Trying DL100xx probing\n");
error = ed_probe_Novell_generic(dev, device_get_flags(dev));
if (bootverbose && error)
device_printf(dev, "Novell generic probe failed: %d\n", error);
if (error != 0)
return (error);
/*
* Linksys registers(offset from ASIC base)
*
* 0x04-0x09 : Physical Address Register 0-5 (PAR0-PAR5)
* 0x0A : Card ID Register (CIR)
* 0x0B : Check Sum Register (SR)
*/
for (sum = 0, i = 0x04; i < 0x0c; i++)
sum += ed_asic_inb(sc, i);
if (sum != 0xff) {
if (bootverbose)
device_printf(dev, "Bad checksum %#x\n", sum);
return (ENXIO); /* invalid DL10019C */
}
if (bootverbose)
device_printf(dev, "CIR is %d\n", ed_asic_inb(sc, 0xa));
for (i = 0; i < ETHER_ADDR_LEN; i++)
sc->enaddr[i] = ed_asic_inb(sc, 0x04 + i);
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
id = ed_asic_inb(sc, 0xf);
sc->isa16bit = 1;
/*
* Hard code values based on the datasheet. We're NE-2000 compatible
* NIC with 24kb of packet memory starting at 24k offset. These
* cards also work with 16k at 16k, but don't work with 24k at 16k
* or 32k at 16k.
*/
sc->type = ED_TYPE_NE2000;
sc->mem_start = 24 * 1024;
memsize = sc->mem_size = 24 * 1024;
sc->mem_end = sc->mem_start + memsize;
sc->tx_page_start = memsize / ED_PAGE_SIZE;
sc->txb_cnt = 3;
sc->rec_page_start = sc->tx_page_start + sc->txb_cnt * ED_TXBUF_SIZE;
sc->rec_page_stop = sc->tx_page_start + memsize / ED_PAGE_SIZE;
sc->mem_ring = sc->mem_start + sc->txb_cnt * ED_PAGE_SIZE * ED_TXBUF_SIZE;
ed_nic_outb(sc, ED_P0_PSTART, sc->mem_start / ED_PAGE_SIZE);
ed_nic_outb(sc, ED_P0_PSTOP, sc->mem_end / ED_PAGE_SIZE);
sc->vendor = ED_VENDOR_NOVELL;
sc->chip_type = (id & 0x90) == 0x90 ?
ED_CHIP_TYPE_DL10022 : ED_CHIP_TYPE_DL10019;
sc->type_str = ((id & 0x90) == 0x90) ? "DL10022" : "DL10019";
sc->mii_readbits = ed_pccard_dl100xx_mii_readbits;
sc->mii_writebits = ed_pccard_dl100xx_mii_writebits;
return (0);
}
/* MII bit-twiddling routines for cards using Dlink chipset */
#define DL100XX_MIISET(sc, x) ed_asic_outb(sc, ED_DL100XX_MIIBUS, \
ed_asic_inb(sc, ED_DL100XX_MIIBUS) | (x))
#define DL100XX_MIICLR(sc, x) ed_asic_outb(sc, ED_DL100XX_MIIBUS, \
ed_asic_inb(sc, ED_DL100XX_MIIBUS) & ~(x))
static void
ed_pccard_dl100xx_mii_reset(struct ed_softc *sc)
{
if (sc->chip_type != ED_CHIP_TYPE_DL10022)
return;
ed_asic_outb(sc, ED_DL100XX_MIIBUS, ED_DL10022_MII_RESET2);
DELAY(10);
ed_asic_outb(sc, ED_DL100XX_MIIBUS,
ED_DL10022_MII_RESET2 | ED_DL10022_MII_RESET1);
DELAY(10);
ed_asic_outb(sc, ED_DL100XX_MIIBUS, ED_DL10022_MII_RESET2);
DELAY(10);
ed_asic_outb(sc, ED_DL100XX_MIIBUS,
ED_DL10022_MII_RESET2 | ED_DL10022_MII_RESET1);
DELAY(10);
ed_asic_outb(sc, ED_DL100XX_MIIBUS, 0);
}
static void
ed_pccard_dl100xx_mii_writebits(struct ed_softc *sc, u_int val, int nbits)
{
int i;
DL100XX_MIISET(sc, ED_DL100XX_MII_DIROUT);
for (i = nbits - 1; i >= 0; i--) {
if ((val >> i) & 1)
DL100XX_MIISET(sc, ED_DL100XX_MII_DATAOUT);
else
DL100XX_MIICLR(sc, ED_DL100XX_MII_DATAOUT);
DL100XX_MIISET(sc, ED_DL100XX_MII_CLK);
DL100XX_MIICLR(sc, ED_DL100XX_MII_CLK);
}
}
static u_int
ed_pccard_dl100xx_mii_readbits(struct ed_softc *sc, int nbits)
{
int i;
u_int val = 0;
DL100XX_MIICLR(sc, ED_DL100XX_MII_DIROUT);
for (i = nbits - 1; i >= 0; i--) {
DL100XX_MIISET(sc, ED_DL100XX_MII_CLK);
val <<= 1;
if (ed_asic_inb(sc, ED_DL100XX_MIIBUS) & ED_DL100XX_MII_DATAIN)
val++;
DL100XX_MIICLR(sc, ED_DL100XX_MII_CLK);
}
return val;
}
static void
ed_pccard_ax88x90_reset(struct ed_softc *sc)
{
int i;
/* Reset Card */
ed_nic_outb(sc, ED_P0_CR, ED_CR_RD2 | ED_CR_STP | ED_CR_PAGE_0);
ed_asic_outb(sc, ED_NOVELL_RESET, ed_asic_inb(sc, ED_NOVELL_RESET));
/* Wait for the RST bit to assert, but cap it at 10ms */
for (i = 10000; !(ed_nic_inb(sc, ED_P0_ISR) & ED_ISR_RST) && i > 0;
i--)
continue;
ed_nic_outb(sc, ED_P0_ISR, ED_ISR_RST); /* ACK INTR */
if (i == 0)
device_printf(sc->dev, "Reset didn't finish\n");
}
/*
* Probe and vendor-specific initialization routine for ax88x90 boards
*/
static int
ed_probe_ax88x90_generic(device_t dev, int flags)
{
struct ed_softc *sc = device_get_softc(dev);
u_int memsize;
static char test_pattern[32] = "THIS is A memory TEST pattern";
char test_buffer[32];
ed_pccard_ax88x90_reset(sc);
DELAY(10*1000);
/* Make sure that we really have an 8390 based board */
if (!ed_probe_generic8390(sc))
return (ENXIO);
sc->vendor = ED_VENDOR_NOVELL;
sc->mem_shared = 0;
sc->cr_proto = ED_CR_RD2;
/*
* This prevents packets from being stored in the NIC memory when the
* readmem routine turns on the start bit in the CR. We write some
* bytes in word mode and verify we can read them back. If we can't
* then we don't have an AX88x90 chip here.
*/
sc->isa16bit = 1;
ed_nic_outb(sc, ED_P0_RCR, ED_RCR_MON);
ed_nic_outb(sc, ED_P0_DCR, ED_DCR_WTS | ED_DCR_FT1 | ED_DCR_LS);
ed_pio_writemem(sc, test_pattern, 16384, sizeof(test_pattern));
ed_pio_readmem(sc, 16384, test_buffer, sizeof(test_pattern));
if (bcmp(test_pattern, test_buffer, sizeof(test_pattern)) != 0)
return (ENXIO);
/*
* Hard code values based on the datasheet. We're NE-2000 compatible
* NIC with 16kb of packet memory starting at 16k offset.
*/
sc->type = ED_TYPE_NE2000;
memsize = sc->mem_size = 16*1024;
sc->mem_start = 16 * 1024;
if (ed_asic_inb(sc, ED_AX88X90_TEST) != 0)
sc->chip_type = ED_CHIP_TYPE_AX88790;
else {
sc->chip_type = ED_CHIP_TYPE_AX88190;
/*
* The AX88190 (not A) has external 64k SRAM. Probe for this
* here. Most of the cards I have either use the AX88190A
* part, or have only 32k SRAM for some reason, so I don't
* know if this works or not.
*/
ed_pio_writemem(sc, test_pattern, 32768, sizeof(test_pattern));
ed_pio_readmem(sc, 32768, test_buffer, sizeof(test_pattern));
if (bcmp(test_pattern, test_buffer, sizeof(test_pattern)) == 0) {
sc->mem_start = 2*1024;
memsize = sc->mem_size = 62 * 1024;
}
}
sc->mem_end = sc->mem_start + memsize;
sc->tx_page_start = memsize / ED_PAGE_SIZE;
if (sc->mem_size > 16 * 1024)
sc->txb_cnt = 3;
else
sc->txb_cnt = 2;
sc->rec_page_start = sc->tx_page_start + sc->txb_cnt * ED_TXBUF_SIZE;
sc->rec_page_stop = sc->tx_page_start + memsize / ED_PAGE_SIZE;
sc->mem_ring = sc->mem_start + sc->txb_cnt * ED_PAGE_SIZE * ED_TXBUF_SIZE;
ed_nic_outb(sc, ED_P0_PSTART, sc->mem_start / ED_PAGE_SIZE);
ed_nic_outb(sc, ED_P0_PSTOP, sc->mem_end / ED_PAGE_SIZE);
/* Get the mac before we go -- It's just at 0x400 in "SRAM" */
ed_pio_readmem(sc, 0x400, sc->enaddr, ETHER_ADDR_LEN);
/* clear any pending interrupts that might have occurred above */
ed_nic_outb(sc, ED_P0_ISR, 0xff);
sc->sc_write_mbufs = ed_pio_write_mbufs;
return (0);
}
static int
ed_pccard_ax88x90_check_mii(device_t dev, struct ed_softc *sc)
{
int i, id;
/*
* All AX88x90 devices have MII and a PHY, so we use this to weed out
* chips that would otherwise make it through the tests we have after
* this point.
*/
for (i = 0; i < 32; i++) {
id = ed_miibus_readreg(dev, i, MII_BMSR);
if (id != 0 && id != 0xffff)
break;
}
/*
* Found one, we're good.
*/
if (i != 32)
return (0);
/*
* Didn't find anything, so try to power up and try again. The PHY
* may be not responding because we're in power down mode.
*/
if (sc->chip_type == ED_CHIP_TYPE_AX88190)
return (ENXIO);
pccard_ccr_write_1(dev, PCCARD_CCR_STATUS, PCCARD_CCR_STATUS_PWRDWN);
for (i = 0; i < 32; i++) {
id = ed_miibus_readreg(dev, i, MII_BMSR);
if (id != 0 && id != 0xffff)
break;
}
/*
* Still no joy? We're AFU, punt.
*/
if (i == 32)
return (ENXIO);
return (0);
}
/*
* Special setup for AX88[17]90
*/
static int
ed_pccard_ax88x90(device_t dev, const struct ed_product *pp)
{
int error;
int iobase;
struct ed_softc *sc = device_get_softc(dev);
if (!(pp->flags & NE2000DVF_AX88X90))
return (ENXIO);
if (bootverbose)
device_printf(dev, "Checking AX88x90\n");
/*
* Set the IOBASE Register. The AX88x90 cards are potentially
* multifunction cards, and thus requires a slight workaround.
* We write the address the card is at, on the off chance that this
* card is not MFC.
* XXX I'm not sure that this is still needed...
*/
iobase = rman_get_start(sc->port_res);
pccard_ccr_write_1(dev, PCCARD_CCR_IOBASE0, iobase & 0xff);
pccard_ccr_write_1(dev, PCCARD_CCR_IOBASE1, (iobase >> 8) & 0xff);
sc->mii_readbits = ed_pccard_ax88x90_mii_readbits;
sc->mii_writebits = ed_pccard_ax88x90_mii_writebits;
error = ed_probe_ax88x90_generic(dev, device_get_flags(dev));
if (error) {
if (bootverbose)
device_printf(dev, "probe ax88x90 failed %d\n",
error);
goto fail;
}
error = ed_pccard_ax88x90_check_mii(dev, sc);
if (error)
goto fail;
sc->vendor = ED_VENDOR_NOVELL;
sc->type = ED_TYPE_NE2000;
if (sc->chip_type == ED_CHIP_TYPE_AX88190)
sc->type_str = "AX88190";
else
sc->type_str = "AX88790";
return (0);
fail:;
sc->mii_readbits = 0;
sc->mii_writebits = 0;
return (error);
}
static void
ed_pccard_ax88x90_mii_writebits(struct ed_softc *sc, u_int val, int nbits)
{
int i, data;
for (i = nbits - 1; i >= 0; i--) {
data = (val >> i) & 1 ? ED_AX88X90_MII_DATAOUT : 0;
ed_asic_outb(sc, ED_AX88X90_MIIBUS, data);
ed_asic_outb(sc, ED_AX88X90_MIIBUS, data | ED_AX88X90_MII_CLK);
}
}
static u_int
ed_pccard_ax88x90_mii_readbits(struct ed_softc *sc, int nbits)
{
int i;
u_int val = 0;
uint8_t mdio;
mdio = ED_AX88X90_MII_DIRIN;
for (i = nbits - 1; i >= 0; i--) {
ed_asic_outb(sc, ED_AX88X90_MIIBUS, mdio);
val <<= 1;
if (ed_asic_inb(sc, ED_AX88X90_MIIBUS) & ED_AX88X90_MII_DATAIN)
val++;
ed_asic_outb(sc, ED_AX88X90_MIIBUS, mdio | ED_AX88X90_MII_CLK);
}
return val;
}
/*
* Special setup for TC5299J
*/
static int
ed_pccard_tc5299j(device_t dev, const struct ed_product *pp)
{
int error, i, id;
char *ts;
struct ed_softc *sc = device_get_softc(dev);
if (!(pp->flags & NE2000DVF_TC5299J))
return (ENXIO);
if (bootverbose)
device_printf(dev, "Checking Tc5299j\n");
error = ed_probe_Novell_generic(dev, device_get_flags(dev));
if (bootverbose)
device_printf(dev, "probe novel returns %d\n", error);
if (error != 0)
return (error);
/*
* Check to see if we have a MII PHY ID at any address. All TC5299J
* devices have MII and a PHY, so we use this to weed out chips that
* would otherwise make it through the tests we have after this point.
*/
sc->mii_readbits = ed_pccard_tc5299j_mii_readbits;
sc->mii_writebits = ed_pccard_tc5299j_mii_writebits;
for (i = 0; i < 32; i++) {
id = ed_miibus_readreg(dev, i, MII_PHYIDR1);
if (id != 0 && id != 0xffff)
break;
}
if (i == 32) {
sc->mii_readbits = 0;
sc->mii_writebits = 0;
return (ENXIO);
}
ts = "TC5299J";
if (ed_pccard_rom_mac(dev, sc->enaddr) == 0) {
sc->mii_readbits = 0;
sc->mii_writebits = 0;
return (ENXIO);
}
sc->vendor = ED_VENDOR_NOVELL;
sc->type = ED_TYPE_NE2000;
sc->chip_type = ED_CHIP_TYPE_TC5299J;
sc->type_str = ts;
return (0);
}
static void
ed_pccard_tc5299j_mii_writebits(struct ed_softc *sc, u_int val, int nbits)
{
int i;
uint8_t cr, data;
/* Select page 3 */
cr = ed_nic_inb(sc, ED_P0_CR);
ed_nic_outb(sc, ED_P0_CR, cr | ED_CR_PAGE_3);
for (i = nbits - 1; i >= 0; i--) {
data = (val >> i) & 1 ? ED_TC5299J_MII_DATAOUT : 0;
ed_nic_outb(sc, ED_TC5299J_MIIBUS, data);
ed_nic_outb(sc, ED_TC5299J_MIIBUS, data | ED_TC5299J_MII_CLK);
}
ed_nic_outb(sc, ED_TC5299J_MIIBUS, 0);
/* Restore prior page */
ed_nic_outb(sc, ED_P0_CR, cr);
}
static u_int
ed_pccard_tc5299j_mii_readbits(struct ed_softc *sc, int nbits)
{
int i;
u_int val = 0;
uint8_t cr;
/* Select page 3 */
cr = ed_nic_inb(sc, ED_P0_CR);
ed_nic_outb(sc, ED_P0_CR, cr | ED_CR_PAGE_3);
ed_asic_outb(sc, ED_TC5299J_MIIBUS, ED_TC5299J_MII_DIROUT);
for (i = nbits - 1; i >= 0; i--) {
ed_nic_outb(sc, ED_TC5299J_MIIBUS,
ED_TC5299J_MII_CLK | ED_TC5299J_MII_DIROUT);
val <<= 1;
if (ed_nic_inb(sc, ED_TC5299J_MIIBUS) & ED_TC5299J_MII_DATAIN)
val++;
ed_nic_outb(sc, ED_TC5299J_MIIBUS, ED_TC5299J_MII_DIROUT);
}
/* Restore prior page */
ed_nic_outb(sc, ED_P0_CR, cr);
return val;
}
/*
* MII bus support routines.
*/
static int
ed_miibus_readreg(device_t dev, int phy, int reg)
{
struct ed_softc *sc;
int failed, val;
sc = device_get_softc(dev);
/*
* The AX88790 has an interesting quirk. It has an internal phy that
* needs a special bit set to access, but can also have additional
* external PHYs set for things like HomeNET media. When accessing
* the internal PHY, a bit has to be set, when accessing the external
* PHYs, it must be clear. See Errata 1, page 51, in the AX88790
* datasheet for more details.
*
* Also, PHYs above 16 appear to be phantoms on some cards, but not
* others. Registers read for this are often the same as prior values
* read. Filter all register requests to 17-31.
*
* I can't explain it, since I don't have the DL100xx data sheets, but
* the DL100xx chips do 13-bits before the 'ACK' but, but the AX88x90
* chips have 14. The linux pcnet and axnet drivers confirm this.
*/
if (sc->chip_type == ED_CHIP_TYPE_AX88790) {
if (phy > 0x10)
return (0);
if (phy == 0x10)
ed_asic_outb(sc, ED_AX88X90_GPIO,
ED_AX88X90_GPIO_INT_PHY);
else
ed_asic_outb(sc, ED_AX88X90_GPIO, 0);
}
(*sc->mii_writebits)(sc, 0xffffffff, 32);
(*sc->mii_writebits)(sc, ED_MII_STARTDELIM, ED_MII_STARTDELIM_BITS);
(*sc->mii_writebits)(sc, ED_MII_READOP, ED_MII_OP_BITS);
(*sc->mii_writebits)(sc, phy, ED_MII_PHY_BITS);
(*sc->mii_writebits)(sc, reg, ED_MII_REG_BITS);
if (sc->chip_type == ED_CHIP_TYPE_AX88790 ||
sc->chip_type == ED_CHIP_TYPE_AX88190)
(*sc->mii_readbits)(sc, ED_MII_ACK_BITS);
failed = (*sc->mii_readbits)(sc, ED_MII_ACK_BITS);
val = (*sc->mii_readbits)(sc, ED_MII_DATA_BITS);
(*sc->mii_writebits)(sc, ED_MII_IDLE, ED_MII_IDLE_BITS);
/* printf("Reading phy %d reg %#x returning %#x (valid %d)\n", phy, reg, val, !failed); */
return (failed ? 0 : val);
}
static int
ed_miibus_writereg(device_t dev, int phy, int reg, int data)
{
struct ed_softc *sc;
/* printf("Writing phy %d reg %#x data %#x\n", phy, reg, data); */
sc = device_get_softc(dev);
/* See ed_miibus_readreg for details */
if (sc->chip_type == ED_CHIP_TYPE_AX88790) {
if (phy > 0x10)
return (0);
if (phy == 0x10)
ed_asic_outb(sc, ED_AX88X90_GPIO,
ED_AX88X90_GPIO_INT_PHY);
else
ed_asic_outb(sc, ED_AX88X90_GPIO, 0);
}
(*sc->mii_writebits)(sc, 0xffffffff, 32);
(*sc->mii_writebits)(sc, ED_MII_STARTDELIM, ED_MII_STARTDELIM_BITS);
(*sc->mii_writebits)(sc, ED_MII_WRITEOP, ED_MII_OP_BITS);
(*sc->mii_writebits)(sc, phy, ED_MII_PHY_BITS);
(*sc->mii_writebits)(sc, reg, ED_MII_REG_BITS);
(*sc->mii_writebits)(sc, ED_MII_TURNAROUND, ED_MII_TURNAROUND_BITS);
(*sc->mii_writebits)(sc, data, ED_MII_DATA_BITS);
(*sc->mii_writebits)(sc, ED_MII_IDLE, ED_MII_IDLE_BITS);
return (0);
}
static int
ed_ifmedia_upd(struct ifnet *ifp)
{
struct ed_softc *sc;
int error;
sc = ifp->if_softc;
if (sc->miibus == NULL)
return (ENXIO);
ED_LOCK(sc);
error = ed_pccard_kick_phy(sc);
ED_UNLOCK(sc);
return (error);
}
static void
ed_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
{
struct ed_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
if (sc->miibus == NULL)
return;
mii = device_get_softc(sc->miibus);
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
}
static void
ed_child_detached(device_t dev, device_t child)
{
struct ed_softc *sc;
sc = device_get_softc(dev);
if (child == sc->miibus)
sc->miibus = NULL;
}
static void
ed_pccard_tick(struct ed_softc *sc)
{
struct mii_data *mii;
int media = 0;
ED_ASSERT_LOCKED(sc);
if (sc->miibus != NULL) {
mii = device_get_softc(sc->miibus);
media = mii->mii_media_status;
mii_tick(mii);
if (mii->mii_media_status & IFM_ACTIVE &&
media != mii->mii_media_status) {
if (sc->chip_type == ED_CHIP_TYPE_DL10022) {
ed_asic_outb(sc, ED_DL10022_DIAG,
(mii->mii_media_active & IFM_FDX) ?
ED_DL10022_COLLISON_DIS : 0);
#ifdef notyet
} else if (sc->chip_type == ED_CHIP_TYPE_DL10019) {
write_asic(sc, ED_DL10019_MAGIC,
(mii->mii_media_active & IFM_FDX) ?
DL19FDUPLX : 0);
#endif
}
}
}
}
static device_method_t ed_pccard_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ed_pccard_probe),
DEVMETHOD(device_attach, ed_pccard_attach),
DEVMETHOD(device_detach, ed_detach),
/* Bus interface */
DEVMETHOD(bus_child_detached, ed_child_detached),
/* MII interface */
DEVMETHOD(miibus_readreg, ed_miibus_readreg),
DEVMETHOD(miibus_writereg, ed_miibus_writereg),
{ 0, 0 }
};
static driver_t ed_pccard_driver = {
"ed",
ed_pccard_methods,
sizeof(struct ed_softc)
};
DRIVER_MODULE(ed, pccard, ed_pccard_driver, ed_devclass, 0, 0);
DRIVER_MODULE(miibus, ed, miibus_driver, miibus_devclass, 0, 0);
MODULE_DEPEND(ed, miibus, 1, 1, 1);
MODULE_DEPEND(ed, ether, 1, 1, 1);
Reference in New Issue View Git Blame Copy Permalink