freebsd-nq/sys/dev/mpt/mpt_raid.h
Marius Strobl ec3e6e77a1 - Send the RELSIM_ADJUST_OPENINGS in response to a MPI_EVENT_QUEUE_FULL using
the right SIM in case the HBA is RAID-capable but the target in question is
  not a hot spare or member of a RAID volume.
- Report the loss and addition of SAS and SATA targets detected via PHY link
  status changes and signalled by MPI_EVENT_SAS_DEVICE_STATUS_CHANGE to cam(4)
  as lost devices and trigger rescans as appropriate. Without this it can take
  quite some time until a lost device actually is no longer tried to be used,
  if it ever stops. [1]
- Handle MPI_EVENT_IR2, MPI_EVENT_LOG_ENTRY_ADDED, MPI_EVENT_SAS_DISCOVERY
  and MPI_EVENT_SAS_PHY_LINK_STATUS silently as these serve no additional
  purpose beyond adding cryptic entries to logs.

Thanks to Hans-Joerg Sirtl for providing one of the HBAs these changes were
developed with and RIP to the mainboard that didn't survive testing them.

PR:		157534 [1]
Approved by:	re (kib)
MFC after:	2 weeks
2011-07-29 18:38:31 +00:00

89 lines
3.2 KiB
C

/* $FreeBSD$ */
/*-
* Definitions for the integrated RAID features LSI MPT Fusion adapters.
*
* Copyright (c) 2005, WHEEL Sp. z o.o.
* Copyright (c) 2004, 2005 Justin T. Gibbs
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon including
* a substantially similar Disclaimer requirement for further binary
* redistribution.
* 3. Neither the names of the above listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF THE COPYRIGHT
* OWNER OR CONTRIBUTOR IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*-
* Some Breakage and Bug Fixing added later.
* Copyright (c) 2006, by Matthew Jacob
* All Rights Reserved
*
* Support from LSI-Logic has also gone a great deal toward making this a
* workable subsystem and is gratefully acknowledged.
*/
#ifndef _MPT_RAID_H_
#define _MPT_RAID_H_
#include <cam/cam.h>
union ccb;
typedef enum {
MPT_RAID_MWCE_ON,
MPT_RAID_MWCE_OFF,
MPT_RAID_MWCE_REBUILD_ONLY,
MPT_RAID_MWCE_NC
} mpt_raid_mwce_t;
cam_status mpt_map_physdisk(struct mpt_softc *, union ccb *, target_id_t *);
int mpt_is_raid_member(struct mpt_softc *, target_id_t);
int mpt_is_raid_volume(struct mpt_softc *, target_id_t);
#if 0
cam_status
mpt_raid_quiesce_disk(struct mpt_softc *, struct mpt_raid_disk *, request_t *);
#endif
void mpt_raid_free_mem(struct mpt_softc *);
static __inline void
mpt_raid_wakeup(struct mpt_softc *mpt)
{
mpt->raid_wakeup++;
wakeup(&mpt->raid_volumes);
}
#define MPT_RAID_SYNC_REPORT_INTERVAL (15 * 60 * hz)
#define MPT_RAID_RESYNC_RATE_MAX (255)
#define MPT_RAID_RESYNC_RATE_MIN (1)
#define MPT_RAID_RESYNC_RATE_NC (0)
#define MPT_RAID_RESYNC_RATE_DEFAULT MPT_RAID_RESYNC_RATE_NC
#define MPT_RAID_QUEUE_DEPTH_DEFAULT (128)
#define MPT_RAID_MWCE_DEFAULT MPT_RAID_MWCE_NC
#define RAID_VOL_FOREACH(mpt, mpt_vol) \
for (mpt_vol = (mpt)->raid_volumes; \
mpt_vol != (mpt)->raid_volumes + (mpt)->raid_max_volumes; \
mpt_vol++)
#endif /*_MPT_RAID_H_ */