015bb88ff2
- hw.usb.ucom.cons_unit is now split into hw.usb.ucom.cons_unit/...cons_subunit. Note: The tunable/sysctl hw.usb.ucom.cons_unit needs to be reviewed if a) a console was defined a USB serial devices, and a USB device with more than 1 subunit is present, and this device is attached before the device functioning as a console or b) a console was defined on a USB device with more than 1 subunit Reviewed by: hps MFC after: 2 weeks
1419 lines
31 KiB
C
1419 lines
31 KiB
C
/* $NetBSD: ucom.c,v 1.40 2001/11/13 06:24:54 lukem Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 2001-2003, 2005, 2008
|
|
* Shunsuke Akiyama <akiyama@jp.FreeBSD.org>.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*-
|
|
* Copyright (c) 1998, 2000 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Lennart Augustsson (lennart@augustsson.net) at
|
|
* Carlstedt Research & Technology.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by the NetBSD
|
|
* Foundation, Inc. and its contributors.
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/stdint.h>
|
|
#include <sys/stddef.h>
|
|
#include <sys/param.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/types.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/linker_set.h>
|
|
#include <sys/module.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sx.h>
|
|
#include <sys/unistd.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/priv.h>
|
|
#include <sys/cons.h>
|
|
#include <sys/kdb.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
|
|
#define USB_DEBUG_VAR ucom_debug
|
|
#include <dev/usb/usb_debug.h>
|
|
#include <dev/usb/usb_busdma.h>
|
|
#include <dev/usb/usb_process.h>
|
|
|
|
#include <dev/usb/serial/usb_serial.h>
|
|
|
|
#include "opt_gdb.h"
|
|
|
|
SYSCTL_NODE(_hw_usb, OID_AUTO, ucom, CTLFLAG_RW, 0, "USB ucom");
|
|
|
|
#ifdef USB_DEBUG
|
|
static int ucom_debug = 0;
|
|
|
|
SYSCTL_INT(_hw_usb_ucom, OID_AUTO, debug, CTLFLAG_RW,
|
|
&ucom_debug, 0, "ucom debug level");
|
|
#endif
|
|
|
|
#define UCOM_CONS_BUFSIZE 1024
|
|
|
|
static uint8_t ucom_cons_rx_buf[UCOM_CONS_BUFSIZE];
|
|
static uint8_t ucom_cons_tx_buf[UCOM_CONS_BUFSIZE];
|
|
|
|
static unsigned int ucom_cons_rx_low = 0;
|
|
static unsigned int ucom_cons_rx_high = 0;
|
|
|
|
static unsigned int ucom_cons_tx_low = 0;
|
|
static unsigned int ucom_cons_tx_high = 0;
|
|
|
|
static int ucom_cons_unit = -1;
|
|
static int ucom_cons_subunit = 0;
|
|
static int ucom_cons_baud = 9600;
|
|
static struct ucom_softc *ucom_cons_softc = NULL;
|
|
|
|
TUNABLE_INT("hw.usb.ucom.cons_unit", &ucom_cons_unit);
|
|
SYSCTL_INT(_hw_usb_ucom, OID_AUTO, cons_unit, CTLFLAG_RW,
|
|
&ucom_cons_unit, 0, "console unit number");
|
|
TUNABLE_INT("hw.usb.ucom.cons_subunit", &ucom_cons_subunit);
|
|
SYSCTL_INT(_hw_usb_ucom, OID_AUTO, cons_subunit, CTLFLAG_RW,
|
|
&ucom_cons_subunit, 0, "console subunit number");
|
|
TUNABLE_INT("hw.usb.ucom.cons_baud", &ucom_cons_baud);
|
|
SYSCTL_INT(_hw_usb_ucom, OID_AUTO, cons_baud, CTLFLAG_RW,
|
|
&ucom_cons_baud, 0, "console baud rate");
|
|
|
|
static usb_proc_callback_t ucom_cfg_start_transfers;
|
|
static usb_proc_callback_t ucom_cfg_open;
|
|
static usb_proc_callback_t ucom_cfg_close;
|
|
static usb_proc_callback_t ucom_cfg_line_state;
|
|
static usb_proc_callback_t ucom_cfg_status_change;
|
|
static usb_proc_callback_t ucom_cfg_param;
|
|
|
|
static int ucom_unit_alloc(void);
|
|
static void ucom_unit_free(int);
|
|
static int ucom_attach_tty(struct ucom_super_softc *, struct ucom_softc *);
|
|
static void ucom_detach_tty(struct ucom_softc *);
|
|
static void ucom_queue_command(struct ucom_softc *,
|
|
usb_proc_callback_t *, struct termios *pt,
|
|
struct usb_proc_msg *t0, struct usb_proc_msg *t1);
|
|
static void ucom_shutdown(struct ucom_softc *);
|
|
static void ucom_ring(struct ucom_softc *, uint8_t);
|
|
static void ucom_break(struct ucom_softc *, uint8_t);
|
|
static void ucom_dtr(struct ucom_softc *, uint8_t);
|
|
static void ucom_rts(struct ucom_softc *, uint8_t);
|
|
|
|
static tsw_open_t ucom_open;
|
|
static tsw_close_t ucom_close;
|
|
static tsw_ioctl_t ucom_ioctl;
|
|
static tsw_modem_t ucom_modem;
|
|
static tsw_param_t ucom_param;
|
|
static tsw_outwakeup_t ucom_outwakeup;
|
|
static tsw_free_t ucom_free;
|
|
|
|
static struct ttydevsw ucom_class = {
|
|
.tsw_flags = TF_INITLOCK | TF_CALLOUT,
|
|
.tsw_open = ucom_open,
|
|
.tsw_close = ucom_close,
|
|
.tsw_outwakeup = ucom_outwakeup,
|
|
.tsw_ioctl = ucom_ioctl,
|
|
.tsw_param = ucom_param,
|
|
.tsw_modem = ucom_modem,
|
|
.tsw_free = ucom_free,
|
|
};
|
|
|
|
MODULE_DEPEND(ucom, usb, 1, 1, 1);
|
|
MODULE_VERSION(ucom, 1);
|
|
|
|
#define UCOM_UNIT_MAX 128 /* limits size of ucom_bitmap */
|
|
|
|
static uint8_t ucom_bitmap[(UCOM_UNIT_MAX + 7) / 8];
|
|
static struct mtx ucom_bitmap_mtx;
|
|
MTX_SYSINIT(ucom_bitmap_mtx, &ucom_bitmap_mtx, "ucom bitmap", MTX_DEF);
|
|
|
|
/*
|
|
* Mark a unit number (the X in cuaUX) as in use.
|
|
*
|
|
* Note that devices using a different naming scheme (see ucom_tty_name()
|
|
* callback) still use this unit allocation.
|
|
*/
|
|
static int
|
|
ucom_unit_alloc(void)
|
|
{
|
|
int unit;
|
|
|
|
mtx_lock(&ucom_bitmap_mtx);
|
|
|
|
for (unit = 0; unit < UCOM_UNIT_MAX; unit++)
|
|
if ((ucom_bitmap[unit / 8] & (1 << (unit % 8))) == 0)
|
|
break;
|
|
|
|
mtx_unlock(&ucom_bitmap_mtx);
|
|
|
|
if (unit == UCOM_UNIT_MAX)
|
|
return -1;
|
|
else
|
|
return unit;
|
|
}
|
|
|
|
/*
|
|
* Mark the unit number as not in use.
|
|
*/
|
|
static void
|
|
ucom_unit_free(int unit)
|
|
{
|
|
mtx_lock(&ucom_bitmap_mtx);
|
|
|
|
ucom_bitmap[unit / 8] &= ~(1 << (unit % 8));
|
|
|
|
mtx_unlock(&ucom_bitmap_mtx);
|
|
}
|
|
|
|
/*
|
|
* Setup a group of one or more serial ports.
|
|
*
|
|
* The mutex pointed to by "mtx" is applied before all
|
|
* callbacks are called back. Also "mtx" must be applied
|
|
* before calling into the ucom-layer!
|
|
*/
|
|
int
|
|
ucom_attach(struct ucom_super_softc *ssc, struct ucom_softc *sc,
|
|
uint32_t subunits, void *parent,
|
|
const struct ucom_callback *callback, struct mtx *mtx)
|
|
{
|
|
uint32_t subunit;
|
|
int error = 0;
|
|
|
|
if ((sc == NULL) ||
|
|
(subunits == 0) ||
|
|
(callback == NULL)) {
|
|
return (EINVAL);
|
|
}
|
|
|
|
ssc->sc_unit = ucom_unit_alloc();
|
|
if (ssc->sc_unit == -1)
|
|
return (ENOMEM);
|
|
|
|
error = usb_proc_create(&ssc->sc_tq, mtx, "ucom", USB_PRI_MED);
|
|
if (error) {
|
|
ucom_unit_free(ssc->sc_unit);
|
|
return (error);
|
|
}
|
|
ssc->sc_subunits = subunits;
|
|
|
|
for (subunit = 0; subunit != ssc->sc_subunits; subunit++) {
|
|
sc[subunit].sc_subunit = subunit;
|
|
sc[subunit].sc_super = ssc;
|
|
sc[subunit].sc_mtx = mtx;
|
|
sc[subunit].sc_parent = parent;
|
|
sc[subunit].sc_callback = callback;
|
|
|
|
error = ucom_attach_tty(ssc, &sc[subunit]);
|
|
if (error) {
|
|
ucom_detach(ssc, &sc[0]);
|
|
return (error);
|
|
}
|
|
sc[subunit].sc_flag |= UCOM_FLAG_ATTACHED;
|
|
}
|
|
|
|
DPRINTF("tp = %p, unit = %d, subunits = %d, device name subunit 0 = %s\n",
|
|
sc->sc_tty, ssc->sc_unit, ssc->sc_subunits, sc[0].sc_devname);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* NOTE: the following function will do nothing if
|
|
* the structure pointed to by "ssc" and "sc" is zero.
|
|
*/
|
|
void
|
|
ucom_detach(struct ucom_super_softc *ssc, struct ucom_softc *sc)
|
|
{
|
|
uint32_t subunit;
|
|
|
|
usb_proc_drain(&ssc->sc_tq);
|
|
|
|
for (subunit = 0; subunit <= ssc->sc_subunits; subunit++) {
|
|
if (sc[subunit].sc_flag & UCOM_FLAG_ATTACHED) {
|
|
|
|
ucom_detach_tty(&sc[subunit]);
|
|
|
|
/* avoid duplicate detach */
|
|
sc[subunit].sc_flag &= ~UCOM_FLAG_ATTACHED;
|
|
}
|
|
}
|
|
ucom_unit_free(ssc->sc_unit);
|
|
usb_proc_free(&ssc->sc_tq);
|
|
}
|
|
|
|
static int
|
|
ucom_attach_tty(struct ucom_super_softc *ssc, struct ucom_softc *sc)
|
|
{
|
|
struct tty *tp;
|
|
char buf[10]; /* temporary TTY device name buffer */
|
|
|
|
tp = tty_alloc_mutex(&ucom_class, sc, sc->sc_mtx);
|
|
if (tp == NULL)
|
|
return (ENOMEM);
|
|
|
|
/* Check if the client has a custom TTY name */
|
|
buf[0] = '\0';
|
|
if (sc->sc_callback->ucom_tty_name) {
|
|
sc->sc_callback->ucom_tty_name(sc, buf,
|
|
sizeof(buf), ssc->sc_unit, sc->sc_subunit);
|
|
}
|
|
if (buf[0] == 0) {
|
|
/* Use default TTY name */
|
|
if (ssc->sc_subunits > 1) {
|
|
/* multiple modems in one */
|
|
snprintf(buf, sizeof(buf), "U%u.%u",
|
|
ssc->sc_unit, sc->sc_subunit);
|
|
} else {
|
|
/* single modem */
|
|
snprintf(buf, sizeof(buf), "U%u", ssc->sc_unit);
|
|
}
|
|
}
|
|
tty_makedev(tp, NULL, "%s", buf);
|
|
|
|
sc->sc_tty = tp;
|
|
|
|
DPRINTF("ttycreate: %s\n", buf);
|
|
cv_init(&sc->sc_cv, "ucom");
|
|
|
|
/* Check if this device should be a console */
|
|
if ((ucom_cons_softc == NULL) &&
|
|
(ssc->sc_unit == ucom_cons_unit) &&
|
|
(sc->sc_subunit == ucom_cons_subunit)) {
|
|
struct termios t;
|
|
|
|
DPRINTF("unit %d subunit %d is console", ssc->sc_unit, sc->sc_subunit);
|
|
|
|
ucom_cons_softc = sc;
|
|
|
|
memset(&t, 0, sizeof(t));
|
|
t.c_ispeed = ucom_cons_baud;
|
|
t.c_ospeed = t.c_ispeed;
|
|
t.c_cflag = CS8;
|
|
|
|
mtx_lock(ucom_cons_softc->sc_mtx);
|
|
ucom_cons_rx_low = 0;
|
|
ucom_cons_rx_high = 0;
|
|
ucom_cons_tx_low = 0;
|
|
ucom_cons_tx_high = 0;
|
|
sc->sc_flag |= UCOM_FLAG_CONSOLE;
|
|
ucom_open(ucom_cons_softc->sc_tty);
|
|
ucom_param(ucom_cons_softc->sc_tty, &t);
|
|
mtx_unlock(ucom_cons_softc->sc_mtx);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ucom_detach_tty(struct ucom_softc *sc)
|
|
{
|
|
struct tty *tp = sc->sc_tty;
|
|
|
|
DPRINTF("sc = %p, tp = %p\n", sc, sc->sc_tty);
|
|
|
|
if (sc->sc_flag & UCOM_FLAG_CONSOLE) {
|
|
mtx_lock(ucom_cons_softc->sc_mtx);
|
|
ucom_close(ucom_cons_softc->sc_tty);
|
|
sc->sc_flag &= ~UCOM_FLAG_CONSOLE;
|
|
mtx_unlock(ucom_cons_softc->sc_mtx);
|
|
ucom_cons_softc = NULL;
|
|
}
|
|
|
|
/* the config thread has been stopped when we get here */
|
|
|
|
mtx_lock(sc->sc_mtx);
|
|
sc->sc_flag |= UCOM_FLAG_GONE;
|
|
sc->sc_flag &= ~(UCOM_FLAG_HL_READY | UCOM_FLAG_LL_READY);
|
|
mtx_unlock(sc->sc_mtx);
|
|
if (tp) {
|
|
tty_lock(tp);
|
|
|
|
ucom_close(tp); /* close, if any */
|
|
|
|
tty_rel_gone(tp);
|
|
|
|
mtx_lock(sc->sc_mtx);
|
|
/* Wait for the callback after the TTY is torn down */
|
|
while (sc->sc_ttyfreed == 0)
|
|
cv_wait(&sc->sc_cv, sc->sc_mtx);
|
|
/*
|
|
* make sure that read and write transfers are stopped
|
|
*/
|
|
if (sc->sc_callback->ucom_stop_read) {
|
|
(sc->sc_callback->ucom_stop_read) (sc);
|
|
}
|
|
if (sc->sc_callback->ucom_stop_write) {
|
|
(sc->sc_callback->ucom_stop_write) (sc);
|
|
}
|
|
mtx_unlock(sc->sc_mtx);
|
|
}
|
|
cv_destroy(&sc->sc_cv);
|
|
}
|
|
|
|
static void
|
|
ucom_queue_command(struct ucom_softc *sc,
|
|
usb_proc_callback_t *fn, struct termios *pt,
|
|
struct usb_proc_msg *t0, struct usb_proc_msg *t1)
|
|
{
|
|
struct ucom_super_softc *ssc = sc->sc_super;
|
|
struct ucom_param_task *task;
|
|
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
if (usb_proc_is_gone(&ssc->sc_tq)) {
|
|
DPRINTF("proc is gone\n");
|
|
return; /* nothing to do */
|
|
}
|
|
/*
|
|
* NOTE: The task cannot get executed before we drop the
|
|
* "sc_mtx" mutex. It is safe to update fields in the message
|
|
* structure after that the message got queued.
|
|
*/
|
|
task = (struct ucom_param_task *)
|
|
usb_proc_msignal(&ssc->sc_tq, t0, t1);
|
|
|
|
/* Setup callback and softc pointers */
|
|
task->hdr.pm_callback = fn;
|
|
task->sc = sc;
|
|
|
|
/*
|
|
* Make a copy of the termios. This field is only present if
|
|
* the "pt" field is not NULL.
|
|
*/
|
|
if (pt != NULL)
|
|
task->termios_copy = *pt;
|
|
|
|
/*
|
|
* Closing the device should be synchronous.
|
|
*/
|
|
if (fn == ucom_cfg_close)
|
|
usb_proc_mwait(&ssc->sc_tq, t0, t1);
|
|
|
|
/*
|
|
* In case of multiple configure requests,
|
|
* keep track of the last one!
|
|
*/
|
|
if (fn == ucom_cfg_start_transfers)
|
|
sc->sc_last_start_xfer = &task->hdr;
|
|
}
|
|
|
|
static void
|
|
ucom_shutdown(struct ucom_softc *sc)
|
|
{
|
|
struct tty *tp = sc->sc_tty;
|
|
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
DPRINTF("\n");
|
|
|
|
/*
|
|
* Hang up if necessary:
|
|
*/
|
|
if (tp->t_termios.c_cflag & HUPCL) {
|
|
ucom_modem(tp, 0, SER_DTR);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Return values:
|
|
* 0: normal
|
|
* else: taskqueue is draining or gone
|
|
*/
|
|
uint8_t
|
|
ucom_cfg_is_gone(struct ucom_softc *sc)
|
|
{
|
|
struct ucom_super_softc *ssc = sc->sc_super;
|
|
|
|
return (usb_proc_is_gone(&ssc->sc_tq));
|
|
}
|
|
|
|
static void
|
|
ucom_cfg_start_transfers(struct usb_proc_msg *_task)
|
|
{
|
|
struct ucom_cfg_task *task =
|
|
(struct ucom_cfg_task *)_task;
|
|
struct ucom_softc *sc = task->sc;
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_LL_READY)) {
|
|
return;
|
|
}
|
|
if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) {
|
|
/* TTY device closed */
|
|
return;
|
|
}
|
|
|
|
if (_task == sc->sc_last_start_xfer)
|
|
sc->sc_flag |= UCOM_FLAG_GP_DATA;
|
|
|
|
if (sc->sc_callback->ucom_start_read) {
|
|
(sc->sc_callback->ucom_start_read) (sc);
|
|
}
|
|
if (sc->sc_callback->ucom_start_write) {
|
|
(sc->sc_callback->ucom_start_write) (sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ucom_start_transfers(struct ucom_softc *sc)
|
|
{
|
|
if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) {
|
|
return;
|
|
}
|
|
/*
|
|
* Make sure that data transfers are started in both
|
|
* directions:
|
|
*/
|
|
if (sc->sc_callback->ucom_start_read) {
|
|
(sc->sc_callback->ucom_start_read) (sc);
|
|
}
|
|
if (sc->sc_callback->ucom_start_write) {
|
|
(sc->sc_callback->ucom_start_write) (sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ucom_cfg_open(struct usb_proc_msg *_task)
|
|
{
|
|
struct ucom_cfg_task *task =
|
|
(struct ucom_cfg_task *)_task;
|
|
struct ucom_softc *sc = task->sc;
|
|
|
|
DPRINTF("\n");
|
|
|
|
if (sc->sc_flag & UCOM_FLAG_LL_READY) {
|
|
|
|
/* already opened */
|
|
|
|
} else {
|
|
|
|
sc->sc_flag |= UCOM_FLAG_LL_READY;
|
|
|
|
if (sc->sc_callback->ucom_cfg_open) {
|
|
(sc->sc_callback->ucom_cfg_open) (sc);
|
|
|
|
/* wait a little */
|
|
usb_pause_mtx(sc->sc_mtx, hz / 10);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
ucom_open(struct tty *tp)
|
|
{
|
|
struct ucom_softc *sc = tty_softc(tp);
|
|
int error;
|
|
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
if (sc->sc_flag & UCOM_FLAG_GONE) {
|
|
return (ENXIO);
|
|
}
|
|
if (sc->sc_flag & UCOM_FLAG_HL_READY) {
|
|
/* already opened */
|
|
return (0);
|
|
}
|
|
DPRINTF("tp = %p\n", tp);
|
|
|
|
if (sc->sc_callback->ucom_pre_open) {
|
|
/*
|
|
* give the lower layer a chance to disallow TTY open, for
|
|
* example if the device is not present:
|
|
*/
|
|
error = (sc->sc_callback->ucom_pre_open) (sc);
|
|
if (error) {
|
|
return (error);
|
|
}
|
|
}
|
|
sc->sc_flag |= UCOM_FLAG_HL_READY;
|
|
|
|
/* Disable transfers */
|
|
sc->sc_flag &= ~UCOM_FLAG_GP_DATA;
|
|
|
|
sc->sc_lsr = 0;
|
|
sc->sc_msr = 0;
|
|
sc->sc_mcr = 0;
|
|
|
|
/* reset programmed line state */
|
|
sc->sc_pls_curr = 0;
|
|
sc->sc_pls_set = 0;
|
|
sc->sc_pls_clr = 0;
|
|
|
|
ucom_queue_command(sc, ucom_cfg_open, NULL,
|
|
&sc->sc_open_task[0].hdr,
|
|
&sc->sc_open_task[1].hdr);
|
|
|
|
/* Queue transfer enable command last */
|
|
ucom_queue_command(sc, ucom_cfg_start_transfers, NULL,
|
|
&sc->sc_start_task[0].hdr,
|
|
&sc->sc_start_task[1].hdr);
|
|
|
|
ucom_modem(tp, SER_DTR | SER_RTS, 0);
|
|
|
|
ucom_ring(sc, 0);
|
|
|
|
ucom_break(sc, 0);
|
|
|
|
ucom_status_change(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ucom_cfg_close(struct usb_proc_msg *_task)
|
|
{
|
|
struct ucom_cfg_task *task =
|
|
(struct ucom_cfg_task *)_task;
|
|
struct ucom_softc *sc = task->sc;
|
|
|
|
DPRINTF("\n");
|
|
|
|
if (sc->sc_flag & UCOM_FLAG_LL_READY) {
|
|
sc->sc_flag &= ~UCOM_FLAG_LL_READY;
|
|
if (sc->sc_callback->ucom_cfg_close)
|
|
(sc->sc_callback->ucom_cfg_close) (sc);
|
|
} else {
|
|
/* already closed */
|
|
}
|
|
}
|
|
|
|
static void
|
|
ucom_close(struct tty *tp)
|
|
{
|
|
struct ucom_softc *sc = tty_softc(tp);
|
|
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
DPRINTF("tp=%p\n", tp);
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) {
|
|
DPRINTF("tp=%p already closed\n", tp);
|
|
return;
|
|
}
|
|
ucom_shutdown(sc);
|
|
|
|
ucom_queue_command(sc, ucom_cfg_close, NULL,
|
|
&sc->sc_close_task[0].hdr,
|
|
&sc->sc_close_task[1].hdr);
|
|
|
|
sc->sc_flag &= ~(UCOM_FLAG_HL_READY | UCOM_FLAG_RTS_IFLOW);
|
|
|
|
if (sc->sc_callback->ucom_stop_read) {
|
|
(sc->sc_callback->ucom_stop_read) (sc);
|
|
}
|
|
}
|
|
|
|
static int
|
|
ucom_ioctl(struct tty *tp, u_long cmd, caddr_t data, struct thread *td)
|
|
{
|
|
struct ucom_softc *sc = tty_softc(tp);
|
|
int error;
|
|
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) {
|
|
return (EIO);
|
|
}
|
|
DPRINTF("cmd = 0x%08lx\n", cmd);
|
|
|
|
switch (cmd) {
|
|
#if 0
|
|
case TIOCSRING:
|
|
ucom_ring(sc, 1);
|
|
error = 0;
|
|
break;
|
|
case TIOCCRING:
|
|
ucom_ring(sc, 0);
|
|
error = 0;
|
|
break;
|
|
#endif
|
|
case TIOCSBRK:
|
|
ucom_break(sc, 1);
|
|
error = 0;
|
|
break;
|
|
case TIOCCBRK:
|
|
ucom_break(sc, 0);
|
|
error = 0;
|
|
break;
|
|
default:
|
|
if (sc->sc_callback->ucom_ioctl) {
|
|
error = (sc->sc_callback->ucom_ioctl)
|
|
(sc, cmd, data, 0, td);
|
|
} else {
|
|
error = ENOIOCTL;
|
|
}
|
|
break;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
ucom_modem(struct tty *tp, int sigon, int sigoff)
|
|
{
|
|
struct ucom_softc *sc = tty_softc(tp);
|
|
uint8_t onoff;
|
|
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) {
|
|
return (0);
|
|
}
|
|
if ((sigon == 0) && (sigoff == 0)) {
|
|
|
|
if (sc->sc_mcr & SER_DTR) {
|
|
sigon |= SER_DTR;
|
|
}
|
|
if (sc->sc_mcr & SER_RTS) {
|
|
sigon |= SER_RTS;
|
|
}
|
|
if (sc->sc_msr & SER_CTS) {
|
|
sigon |= SER_CTS;
|
|
}
|
|
if (sc->sc_msr & SER_DCD) {
|
|
sigon |= SER_DCD;
|
|
}
|
|
if (sc->sc_msr & SER_DSR) {
|
|
sigon |= SER_DSR;
|
|
}
|
|
if (sc->sc_msr & SER_RI) {
|
|
sigon |= SER_RI;
|
|
}
|
|
return (sigon);
|
|
}
|
|
if (sigon & SER_DTR) {
|
|
sc->sc_mcr |= SER_DTR;
|
|
}
|
|
if (sigoff & SER_DTR) {
|
|
sc->sc_mcr &= ~SER_DTR;
|
|
}
|
|
if (sigon & SER_RTS) {
|
|
sc->sc_mcr |= SER_RTS;
|
|
}
|
|
if (sigoff & SER_RTS) {
|
|
sc->sc_mcr &= ~SER_RTS;
|
|
}
|
|
onoff = (sc->sc_mcr & SER_DTR) ? 1 : 0;
|
|
ucom_dtr(sc, onoff);
|
|
|
|
onoff = (sc->sc_mcr & SER_RTS) ? 1 : 0;
|
|
ucom_rts(sc, onoff);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ucom_cfg_line_state(struct usb_proc_msg *_task)
|
|
{
|
|
struct ucom_cfg_task *task =
|
|
(struct ucom_cfg_task *)_task;
|
|
struct ucom_softc *sc = task->sc;
|
|
uint8_t notch_bits;
|
|
uint8_t any_bits;
|
|
uint8_t prev_value;
|
|
uint8_t last_value;
|
|
uint8_t mask;
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_LL_READY)) {
|
|
return;
|
|
}
|
|
|
|
mask = 0;
|
|
/* compute callback mask */
|
|
if (sc->sc_callback->ucom_cfg_set_dtr)
|
|
mask |= UCOM_LS_DTR;
|
|
if (sc->sc_callback->ucom_cfg_set_rts)
|
|
mask |= UCOM_LS_RTS;
|
|
if (sc->sc_callback->ucom_cfg_set_break)
|
|
mask |= UCOM_LS_BREAK;
|
|
if (sc->sc_callback->ucom_cfg_set_ring)
|
|
mask |= UCOM_LS_RING;
|
|
|
|
/* compute the bits we are to program */
|
|
notch_bits = (sc->sc_pls_set & sc->sc_pls_clr) & mask;
|
|
any_bits = (sc->sc_pls_set | sc->sc_pls_clr) & mask;
|
|
prev_value = sc->sc_pls_curr ^ notch_bits;
|
|
last_value = sc->sc_pls_curr;
|
|
|
|
/* reset programmed line state */
|
|
sc->sc_pls_curr = 0;
|
|
sc->sc_pls_set = 0;
|
|
sc->sc_pls_clr = 0;
|
|
|
|
/* ensure that we don't loose any levels */
|
|
if (notch_bits & UCOM_LS_DTR)
|
|
sc->sc_callback->ucom_cfg_set_dtr(sc,
|
|
(prev_value & UCOM_LS_DTR) ? 1 : 0);
|
|
if (notch_bits & UCOM_LS_RTS)
|
|
sc->sc_callback->ucom_cfg_set_rts(sc,
|
|
(prev_value & UCOM_LS_RTS) ? 1 : 0);
|
|
if (notch_bits & UCOM_LS_BREAK)
|
|
sc->sc_callback->ucom_cfg_set_break(sc,
|
|
(prev_value & UCOM_LS_BREAK) ? 1 : 0);
|
|
if (notch_bits & UCOM_LS_RING)
|
|
sc->sc_callback->ucom_cfg_set_ring(sc,
|
|
(prev_value & UCOM_LS_RING) ? 1 : 0);
|
|
|
|
/* set last value */
|
|
if (any_bits & UCOM_LS_DTR)
|
|
sc->sc_callback->ucom_cfg_set_dtr(sc,
|
|
(last_value & UCOM_LS_DTR) ? 1 : 0);
|
|
if (any_bits & UCOM_LS_RTS)
|
|
sc->sc_callback->ucom_cfg_set_rts(sc,
|
|
(last_value & UCOM_LS_RTS) ? 1 : 0);
|
|
if (any_bits & UCOM_LS_BREAK)
|
|
sc->sc_callback->ucom_cfg_set_break(sc,
|
|
(last_value & UCOM_LS_BREAK) ? 1 : 0);
|
|
if (any_bits & UCOM_LS_RING)
|
|
sc->sc_callback->ucom_cfg_set_ring(sc,
|
|
(last_value & UCOM_LS_RING) ? 1 : 0);
|
|
}
|
|
|
|
static void
|
|
ucom_line_state(struct ucom_softc *sc,
|
|
uint8_t set_bits, uint8_t clear_bits)
|
|
{
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) {
|
|
return;
|
|
}
|
|
|
|
DPRINTF("on=0x%02x, off=0x%02x\n", set_bits, clear_bits);
|
|
|
|
/* update current programmed line state */
|
|
sc->sc_pls_curr |= set_bits;
|
|
sc->sc_pls_curr &= ~clear_bits;
|
|
sc->sc_pls_set |= set_bits;
|
|
sc->sc_pls_clr |= clear_bits;
|
|
|
|
/* defer driver programming */
|
|
ucom_queue_command(sc, ucom_cfg_line_state, NULL,
|
|
&sc->sc_line_state_task[0].hdr,
|
|
&sc->sc_line_state_task[1].hdr);
|
|
}
|
|
|
|
static void
|
|
ucom_ring(struct ucom_softc *sc, uint8_t onoff)
|
|
{
|
|
DPRINTF("onoff = %d\n", onoff);
|
|
|
|
if (onoff)
|
|
ucom_line_state(sc, UCOM_LS_RING, 0);
|
|
else
|
|
ucom_line_state(sc, 0, UCOM_LS_RING);
|
|
}
|
|
|
|
static void
|
|
ucom_break(struct ucom_softc *sc, uint8_t onoff)
|
|
{
|
|
DPRINTF("onoff = %d\n", onoff);
|
|
|
|
if (onoff)
|
|
ucom_line_state(sc, UCOM_LS_BREAK, 0);
|
|
else
|
|
ucom_line_state(sc, 0, UCOM_LS_BREAK);
|
|
}
|
|
|
|
static void
|
|
ucom_dtr(struct ucom_softc *sc, uint8_t onoff)
|
|
{
|
|
DPRINTF("onoff = %d\n", onoff);
|
|
|
|
if (onoff)
|
|
ucom_line_state(sc, UCOM_LS_DTR, 0);
|
|
else
|
|
ucom_line_state(sc, 0, UCOM_LS_DTR);
|
|
}
|
|
|
|
static void
|
|
ucom_rts(struct ucom_softc *sc, uint8_t onoff)
|
|
{
|
|
DPRINTF("onoff = %d\n", onoff);
|
|
|
|
if (onoff)
|
|
ucom_line_state(sc, UCOM_LS_RTS, 0);
|
|
else
|
|
ucom_line_state(sc, 0, UCOM_LS_RTS);
|
|
}
|
|
|
|
static void
|
|
ucom_cfg_status_change(struct usb_proc_msg *_task)
|
|
{
|
|
struct ucom_cfg_task *task =
|
|
(struct ucom_cfg_task *)_task;
|
|
struct ucom_softc *sc = task->sc;
|
|
struct tty *tp;
|
|
uint8_t new_msr;
|
|
uint8_t new_lsr;
|
|
uint8_t onoff;
|
|
uint8_t lsr_delta;
|
|
|
|
tp = sc->sc_tty;
|
|
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_LL_READY)) {
|
|
return;
|
|
}
|
|
if (sc->sc_callback->ucom_cfg_get_status == NULL) {
|
|
return;
|
|
}
|
|
/* get status */
|
|
|
|
new_msr = 0;
|
|
new_lsr = 0;
|
|
|
|
(sc->sc_callback->ucom_cfg_get_status) (sc, &new_lsr, &new_msr);
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) {
|
|
/* TTY device closed */
|
|
return;
|
|
}
|
|
onoff = ((sc->sc_msr ^ new_msr) & SER_DCD);
|
|
lsr_delta = (sc->sc_lsr ^ new_lsr);
|
|
|
|
sc->sc_msr = new_msr;
|
|
sc->sc_lsr = new_lsr;
|
|
|
|
if (onoff) {
|
|
|
|
onoff = (sc->sc_msr & SER_DCD) ? 1 : 0;
|
|
|
|
DPRINTF("DCD changed to %d\n", onoff);
|
|
|
|
ttydisc_modem(tp, onoff);
|
|
}
|
|
|
|
if ((lsr_delta & ULSR_BI) && (sc->sc_lsr & ULSR_BI)) {
|
|
|
|
DPRINTF("BREAK detected\n");
|
|
|
|
ttydisc_rint(tp, 0, TRE_BREAK);
|
|
ttydisc_rint_done(tp);
|
|
}
|
|
|
|
if ((lsr_delta & ULSR_FE) && (sc->sc_lsr & ULSR_FE)) {
|
|
|
|
DPRINTF("Frame error detected\n");
|
|
|
|
ttydisc_rint(tp, 0, TRE_FRAMING);
|
|
ttydisc_rint_done(tp);
|
|
}
|
|
|
|
if ((lsr_delta & ULSR_PE) && (sc->sc_lsr & ULSR_PE)) {
|
|
|
|
DPRINTF("Parity error detected\n");
|
|
|
|
ttydisc_rint(tp, 0, TRE_PARITY);
|
|
ttydisc_rint_done(tp);
|
|
}
|
|
}
|
|
|
|
void
|
|
ucom_status_change(struct ucom_softc *sc)
|
|
{
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
if (sc->sc_flag & UCOM_FLAG_CONSOLE)
|
|
return; /* not supported */
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) {
|
|
return;
|
|
}
|
|
DPRINTF("\n");
|
|
|
|
ucom_queue_command(sc, ucom_cfg_status_change, NULL,
|
|
&sc->sc_status_task[0].hdr,
|
|
&sc->sc_status_task[1].hdr);
|
|
}
|
|
|
|
static void
|
|
ucom_cfg_param(struct usb_proc_msg *_task)
|
|
{
|
|
struct ucom_param_task *task =
|
|
(struct ucom_param_task *)_task;
|
|
struct ucom_softc *sc = task->sc;
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_LL_READY)) {
|
|
return;
|
|
}
|
|
if (sc->sc_callback->ucom_cfg_param == NULL) {
|
|
return;
|
|
}
|
|
|
|
(sc->sc_callback->ucom_cfg_param) (sc, &task->termios_copy);
|
|
|
|
/* wait a little */
|
|
usb_pause_mtx(sc->sc_mtx, hz / 10);
|
|
}
|
|
|
|
static int
|
|
ucom_param(struct tty *tp, struct termios *t)
|
|
{
|
|
struct ucom_softc *sc = tty_softc(tp);
|
|
uint8_t opened;
|
|
int error;
|
|
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
opened = 0;
|
|
error = 0;
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) {
|
|
|
|
/* XXX the TTY layer should call "open()" first! */
|
|
|
|
error = ucom_open(tp);
|
|
if (error) {
|
|
goto done;
|
|
}
|
|
opened = 1;
|
|
}
|
|
DPRINTF("sc = %p\n", sc);
|
|
|
|
/* Check requested parameters. */
|
|
if (t->c_ospeed < 0) {
|
|
DPRINTF("negative ospeed\n");
|
|
error = EINVAL;
|
|
goto done;
|
|
}
|
|
if (t->c_ispeed && (t->c_ispeed != t->c_ospeed)) {
|
|
DPRINTF("mismatch ispeed and ospeed\n");
|
|
error = EINVAL;
|
|
goto done;
|
|
}
|
|
t->c_ispeed = t->c_ospeed;
|
|
|
|
if (sc->sc_callback->ucom_pre_param) {
|
|
/* Let the lower layer verify the parameters */
|
|
error = (sc->sc_callback->ucom_pre_param) (sc, t);
|
|
if (error) {
|
|
DPRINTF("callback error = %d\n", error);
|
|
goto done;
|
|
}
|
|
}
|
|
|
|
/* Disable transfers */
|
|
sc->sc_flag &= ~UCOM_FLAG_GP_DATA;
|
|
|
|
/* Queue baud rate programming command first */
|
|
ucom_queue_command(sc, ucom_cfg_param, t,
|
|
&sc->sc_param_task[0].hdr,
|
|
&sc->sc_param_task[1].hdr);
|
|
|
|
/* Queue transfer enable command last */
|
|
ucom_queue_command(sc, ucom_cfg_start_transfers, NULL,
|
|
&sc->sc_start_task[0].hdr,
|
|
&sc->sc_start_task[1].hdr);
|
|
|
|
if (t->c_cflag & CRTS_IFLOW) {
|
|
sc->sc_flag |= UCOM_FLAG_RTS_IFLOW;
|
|
} else if (sc->sc_flag & UCOM_FLAG_RTS_IFLOW) {
|
|
sc->sc_flag &= ~UCOM_FLAG_RTS_IFLOW;
|
|
ucom_modem(tp, SER_RTS, 0);
|
|
}
|
|
done:
|
|
if (error) {
|
|
if (opened) {
|
|
ucom_close(tp);
|
|
}
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
ucom_outwakeup(struct tty *tp)
|
|
{
|
|
struct ucom_softc *sc = tty_softc(tp);
|
|
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
DPRINTF("sc = %p\n", sc);
|
|
|
|
if (!(sc->sc_flag & UCOM_FLAG_HL_READY)) {
|
|
/* The higher layer is not ready */
|
|
return;
|
|
}
|
|
ucom_start_transfers(sc);
|
|
}
|
|
|
|
/*------------------------------------------------------------------------*
|
|
* ucom_get_data
|
|
*
|
|
* Return values:
|
|
* 0: No data is available.
|
|
* Else: Data is available.
|
|
*------------------------------------------------------------------------*/
|
|
uint8_t
|
|
ucom_get_data(struct ucom_softc *sc, struct usb_page_cache *pc,
|
|
uint32_t offset, uint32_t len, uint32_t *actlen)
|
|
{
|
|
struct usb_page_search res;
|
|
struct tty *tp = sc->sc_tty;
|
|
uint32_t cnt;
|
|
uint32_t offset_orig;
|
|
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
if (sc->sc_flag & UCOM_FLAG_CONSOLE) {
|
|
unsigned int temp;
|
|
|
|
/* get total TX length */
|
|
|
|
temp = ucom_cons_tx_high - ucom_cons_tx_low;
|
|
temp %= UCOM_CONS_BUFSIZE;
|
|
|
|
/* limit TX length */
|
|
|
|
if (temp > (UCOM_CONS_BUFSIZE - ucom_cons_tx_low))
|
|
temp = (UCOM_CONS_BUFSIZE - ucom_cons_tx_low);
|
|
|
|
if (temp > len)
|
|
temp = len;
|
|
|
|
/* copy in data */
|
|
|
|
usbd_copy_in(pc, offset, ucom_cons_tx_buf + ucom_cons_tx_low, temp);
|
|
|
|
/* update counters */
|
|
|
|
ucom_cons_tx_low += temp;
|
|
ucom_cons_tx_low %= UCOM_CONS_BUFSIZE;
|
|
|
|
/* store actual length */
|
|
|
|
*actlen = temp;
|
|
|
|
return (temp ? 1 : 0);
|
|
}
|
|
|
|
if (tty_gone(tp) ||
|
|
!(sc->sc_flag & UCOM_FLAG_GP_DATA)) {
|
|
actlen[0] = 0;
|
|
return (0); /* multiport device polling */
|
|
}
|
|
offset_orig = offset;
|
|
|
|
while (len != 0) {
|
|
|
|
usbd_get_page(pc, offset, &res);
|
|
|
|
if (res.length > len) {
|
|
res.length = len;
|
|
}
|
|
/* copy data directly into USB buffer */
|
|
cnt = ttydisc_getc(tp, res.buffer, res.length);
|
|
|
|
offset += cnt;
|
|
len -= cnt;
|
|
|
|
if (cnt < res.length) {
|
|
/* end of buffer */
|
|
break;
|
|
}
|
|
}
|
|
|
|
actlen[0] = offset - offset_orig;
|
|
|
|
DPRINTF("cnt=%d\n", actlen[0]);
|
|
|
|
if (actlen[0] == 0) {
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
void
|
|
ucom_put_data(struct ucom_softc *sc, struct usb_page_cache *pc,
|
|
uint32_t offset, uint32_t len)
|
|
{
|
|
struct usb_page_search res;
|
|
struct tty *tp = sc->sc_tty;
|
|
char *buf;
|
|
uint32_t cnt;
|
|
|
|
mtx_assert(sc->sc_mtx, MA_OWNED);
|
|
|
|
if (sc->sc_flag & UCOM_FLAG_CONSOLE) {
|
|
unsigned int temp;
|
|
|
|
/* get maximum RX length */
|
|
|
|
temp = (UCOM_CONS_BUFSIZE - 1) - ucom_cons_rx_high + ucom_cons_rx_low;
|
|
temp %= UCOM_CONS_BUFSIZE;
|
|
|
|
/* limit RX length */
|
|
|
|
if (temp > (UCOM_CONS_BUFSIZE - ucom_cons_rx_high))
|
|
temp = (UCOM_CONS_BUFSIZE - ucom_cons_rx_high);
|
|
|
|
if (temp > len)
|
|
temp = len;
|
|
|
|
/* copy out data */
|
|
|
|
usbd_copy_out(pc, offset, ucom_cons_rx_buf + ucom_cons_rx_high, temp);
|
|
|
|
/* update counters */
|
|
|
|
ucom_cons_rx_high += temp;
|
|
ucom_cons_rx_high %= UCOM_CONS_BUFSIZE;
|
|
|
|
return;
|
|
}
|
|
|
|
if (tty_gone(tp))
|
|
return; /* multiport device polling */
|
|
|
|
if (len == 0)
|
|
return; /* no data */
|
|
|
|
/* set a flag to prevent recursation ? */
|
|
|
|
while (len > 0) {
|
|
|
|
usbd_get_page(pc, offset, &res);
|
|
|
|
if (res.length > len) {
|
|
res.length = len;
|
|
}
|
|
len -= res.length;
|
|
offset += res.length;
|
|
|
|
/* pass characters to tty layer */
|
|
|
|
buf = res.buffer;
|
|
cnt = res.length;
|
|
|
|
/* first check if we can pass the buffer directly */
|
|
|
|
if (ttydisc_can_bypass(tp)) {
|
|
if (ttydisc_rint_bypass(tp, buf, cnt) != cnt) {
|
|
DPRINTF("tp=%p, data lost\n", tp);
|
|
}
|
|
continue;
|
|
}
|
|
/* need to loop */
|
|
|
|
for (cnt = 0; cnt != res.length; cnt++) {
|
|
if (ttydisc_rint(tp, buf[cnt], 0) == -1) {
|
|
/* XXX what should we do? */
|
|
|
|
DPRINTF("tp=%p, lost %d "
|
|
"chars\n", tp, res.length - cnt);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
ttydisc_rint_done(tp);
|
|
}
|
|
|
|
static void
|
|
ucom_free(void *xsc)
|
|
{
|
|
struct ucom_softc *sc = xsc;
|
|
|
|
mtx_lock(sc->sc_mtx);
|
|
sc->sc_ttyfreed = 1;
|
|
cv_signal(&sc->sc_cv);
|
|
mtx_unlock(sc->sc_mtx);
|
|
}
|
|
|
|
static cn_probe_t ucom_cnprobe;
|
|
static cn_init_t ucom_cninit;
|
|
static cn_term_t ucom_cnterm;
|
|
static cn_getc_t ucom_cngetc;
|
|
static cn_putc_t ucom_cnputc;
|
|
|
|
CONSOLE_DRIVER(ucom);
|
|
|
|
static void
|
|
ucom_cnprobe(struct consdev *cp)
|
|
{
|
|
if (ucom_cons_unit != -1)
|
|
cp->cn_pri = CN_NORMAL;
|
|
else
|
|
cp->cn_pri = CN_DEAD;
|
|
|
|
strlcpy(cp->cn_name, "ucom", sizeof(cp->cn_name));
|
|
}
|
|
|
|
static void
|
|
ucom_cninit(struct consdev *cp)
|
|
{
|
|
}
|
|
|
|
static void
|
|
ucom_cnterm(struct consdev *cp)
|
|
{
|
|
}
|
|
|
|
static int
|
|
ucom_cngetc(struct consdev *cd)
|
|
{
|
|
struct ucom_softc *sc = ucom_cons_softc;
|
|
int c;
|
|
|
|
if (sc == NULL)
|
|
return (-1);
|
|
|
|
mtx_lock(sc->sc_mtx);
|
|
|
|
if (ucom_cons_rx_low != ucom_cons_rx_high) {
|
|
c = ucom_cons_rx_buf[ucom_cons_rx_low];
|
|
ucom_cons_rx_low ++;
|
|
ucom_cons_rx_low %= UCOM_CONS_BUFSIZE;
|
|
} else {
|
|
c = -1;
|
|
}
|
|
|
|
/* start USB transfers */
|
|
ucom_outwakeup(sc->sc_tty);
|
|
|
|
mtx_unlock(sc->sc_mtx);
|
|
|
|
/* poll if necessary */
|
|
if (kdb_active && sc->sc_callback->ucom_poll)
|
|
(sc->sc_callback->ucom_poll) (sc);
|
|
|
|
return (c);
|
|
}
|
|
|
|
static void
|
|
ucom_cnputc(struct consdev *cd, int c)
|
|
{
|
|
struct ucom_softc *sc = ucom_cons_softc;
|
|
unsigned int temp;
|
|
|
|
if (sc == NULL)
|
|
return;
|
|
|
|
repeat:
|
|
|
|
mtx_lock(sc->sc_mtx);
|
|
|
|
/* compute maximum TX length */
|
|
|
|
temp = (UCOM_CONS_BUFSIZE - 1) - ucom_cons_tx_high + ucom_cons_tx_low;
|
|
temp %= UCOM_CONS_BUFSIZE;
|
|
|
|
if (temp) {
|
|
ucom_cons_tx_buf[ucom_cons_tx_high] = c;
|
|
ucom_cons_tx_high ++;
|
|
ucom_cons_tx_high %= UCOM_CONS_BUFSIZE;
|
|
}
|
|
|
|
/* start USB transfers */
|
|
ucom_outwakeup(sc->sc_tty);
|
|
|
|
mtx_unlock(sc->sc_mtx);
|
|
|
|
/* poll if necessary */
|
|
if (kdb_active && sc->sc_callback->ucom_poll) {
|
|
(sc->sc_callback->ucom_poll) (sc);
|
|
/* simple flow control */
|
|
if (temp == 0)
|
|
goto repeat;
|
|
}
|
|
}
|
|
|
|
#if defined(GDB)
|
|
|
|
#include <gdb/gdb.h>
|
|
|
|
static gdb_probe_f ucom_gdbprobe;
|
|
static gdb_init_f ucom_gdbinit;
|
|
static gdb_term_f ucom_gdbterm;
|
|
static gdb_getc_f ucom_gdbgetc;
|
|
static gdb_putc_f ucom_gdbputc;
|
|
|
|
GDB_DBGPORT(sio, ucom_gdbprobe, ucom_gdbinit, ucom_gdbterm, ucom_gdbgetc, ucom_gdbputc);
|
|
|
|
static int
|
|
ucom_gdbprobe(void)
|
|
{
|
|
return ((ucom_cons_softc != NULL) ? 0 : -1);
|
|
}
|
|
|
|
static void
|
|
ucom_gdbinit(void)
|
|
{
|
|
}
|
|
|
|
static void
|
|
ucom_gdbterm(void)
|
|
{
|
|
}
|
|
|
|
static void
|
|
ucom_gdbputc(int c)
|
|
{
|
|
ucom_cnputc(NULL, c);
|
|
}
|
|
|
|
static int
|
|
ucom_gdbgetc(void)
|
|
{
|
|
return (ucom_cngetc(NULL));
|
|
}
|
|
|
|
#endif
|