d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
017902fc5f
freebsd-nq/sys/dev/cesa/cesa.h
John Baldwin c034143269 Refactor driver and consumer interfaces for OCF (in-kernel crypto). 
- The linked list of cryptoini structures used in session
  initialization is replaced with a new flat structure: struct
  crypto_session_params.  This session includes a new mode to define
  how the other fields should be interpreted.  Available modes
  include:

  - COMPRESS (for compression/decompression)
  - CIPHER (for simply encryption/decryption)
  - DIGEST (computing and verifying digests)
  - AEAD (combined auth and encryption such as AES-GCM and AES-CCM)
  - ETA (combined auth and encryption using encrypt-then-authenticate)

  Additional modes could be added in the future (e.g. if we wanted to
  support TLS MtE for AES-CBC in the kernel we could add a new mode
  for that.  TLS modes might also affect how AAD is interpreted, etc.)

  The flat structure also includes the key lengths and algorithms as
  before.  However, code doesn't have to walk the linked list and
  switch on the algorithm to determine which key is the auth key vs
  encryption key.  The 'csp_auth_*' fields are always used for auth
  keys and settings and 'csp_cipher_*' for cipher.  (Compression
  algorithms are stored in csp_cipher_alg.)

- Drivers no longer register a list of supported algorithms.  This
  doesn't quite work when you factor in modes (e.g. a driver might
  support both AES-CBC and SHA2-256-HMAC separately but not combined
  for ETA).  Instead, a new 'crypto_probesession' method has been
  added to the kobj interface for symmteric crypto drivers.  This
  method returns a negative value on success (similar to how
  device_probe works) and the crypto framework uses this value to pick
  the "best" driver.  There are three constants for hardware
  (e.g. ccr), accelerated software (e.g. aesni), and plain software
  (cryptosoft) that give preference in that order.  One effect of this
  is that if you request only hardware when creating a new session,
  you will no longer get a session using accelerated software.
  Another effect is that the default setting to disallow software
  crypto via /dev/crypto now disables accelerated software.

  Once a driver is chosen, 'crypto_newsession' is invoked as before.

- Crypto operations are now solely described by the flat 'cryptop'
  structure.  The linked list of descriptors has been removed.

  A separate enum has been added to describe the type of data buffer
  in use instead of using CRYPTO_F_* flags to make it easier to add
  more types in the future if needed (e.g. wired userspace buffers for
  zero-copy).  It will also make it easier to re-introduce separate
  input and output buffers (in-kernel TLS would benefit from this).

  Try to make the flags related to IV handling less insane:

  - CRYPTO_F_IV_SEPARATE means that the IV is stored in the 'crp_iv'
    member of the operation structure.  If this flag is not set, the
    IV is stored in the data buffer at the 'crp_iv_start' offset.

  - CRYPTO_F_IV_GENERATE means that a random IV should be generated
    and stored into the data buffer.  This cannot be used with
    CRYPTO_F_IV_SEPARATE.

  If a consumer wants to deal with explicit vs implicit IVs, etc. it
  can always generate the IV however it needs and store partial IVs in
  the buffer and the full IV/nonce in crp_iv and set
  CRYPTO_F_IV_SEPARATE.

  The layout of the buffer is now described via fields in cryptop.
  crp_aad_start and crp_aad_length define the boundaries of any AAD.
  Previously with GCM and CCM you defined an auth crd with this range,
  but for ETA your auth crd had to span both the AAD and plaintext
  (and they had to be adjacent).

  crp_payload_start and crp_payload_length define the boundaries of
  the plaintext/ciphertext.  Modes that only do a single operation
  (COMPRESS, CIPHER, DIGEST) should only use this region and leave the
  AAD region empty.

  If a digest is present (or should be generated), it's starting
  location is marked by crp_digest_start.

  Instead of using the CRD_F_ENCRYPT flag to determine the direction
  of the operation, cryptop now includes an 'op' field defining the
  operation to perform.  For digests I've added a new VERIFY digest
  mode which assumes a digest is present in the input and fails the
  request with EBADMSG if it doesn't match the internally-computed
  digest.  GCM and CCM already assumed this, and the new AEAD mode
  requires this for decryption.  The new ETA mode now also requires
  this for decryption, so IPsec and GELI no longer do their own
  authentication verification.  Simple DIGEST operations can also do
  this, though there are no in-tree consumers.

  To eventually support some refcounting to close races, the session
  cookie is now passed to crypto_getop() and clients should no longer
  set crp_sesssion directly.

- Assymteric crypto operation structures should be allocated via
  crypto_getkreq() and freed via crypto_freekreq().  This permits the
  crypto layer to track open asym requests and close races with a
  driver trying to unregister while asym requests are in flight.

- crypto_copyback, crypto_copydata, crypto_apply, and
  crypto_contiguous_subsegment now accept the 'crp' object as the
  first parameter instead of individual members.  This makes it easier
  to deal with different buffer types in the future as well as
  separate input and output buffers.  It's also simpler for driver
  writers to use.

- bus_dmamap_load_crp() loads a DMA mapping for a crypto buffer.
  This understands the various types of buffers so that drivers that
  use DMA do not have to be aware of different buffer types.

- Helper routines now exist to build an auth context for HMAC IPAD
  and OPAD.  This reduces some duplicated work among drivers.

- Key buffers are now treated as const throughout the framework and in
  device drivers.  However, session key buffers provided when a session
  is created are expected to remain alive for the duration of the
  session.

- GCM and CCM sessions now only specify a cipher algorithm and a cipher
  key.  The redundant auth information is not needed or used.

- For cryptosoft, split up the code a bit such that the 'process'
  callback now invokes a function pointer in the session.  This
  function pointer is set based on the mode (in effect) though it
  simplifies a few edge cases that would otherwise be in the switch in
  'process'.

  It does split up GCM vs CCM which I think is more readable even if there
  is some duplication.

- I changed /dev/crypto to support GMAC requests using CRYPTO_AES_NIST_GMAC
  as an auth algorithm and updated cryptocheck to work with it.

- Combined cipher and auth sessions via /dev/crypto now always use ETA
  mode.  The COP_F_CIPHER_FIRST flag is now a no-op that is ignored.
  This was actually documented as being true in crypto(4) before, but
  the code had not implemented this before I added the CIPHER_FIRST
  flag.

- I have not yet updated /dev/crypto to be aware of explicit modes for
  sessions.  I will probably do that at some point in the future as well
  as teach it about IV/nonce and tag lengths for AEAD so we can support
  all of the NIST KAT tests for GCM and CCM.

- I've split up the exising crypto.9 manpage into several pages
  of which many are written from scratch.

- I have converted all drivers and consumers in the tree and verified
  that they compile, but I have not tested all of them.  I have tested
  the following drivers:

  - cryptosoft
  - aesni (AES only)
  - blake2
  - ccr

  and the following consumers:

  - cryptodev
  - IPsec
  - ktls_ocf
  - GELI (lightly)

  I have not tested the following:

  - ccp
  - aesni with sha
  - hifn
  - kgssapi_krb5
  - ubsec
  - padlock
  - safe
  - armv8_crypto (aarch64)
  - glxsb (i386)
  - sec (ppc)
  - cesa (armv7)
  - cryptocteon (mips64)
  - nlmsec (mips64)

Discussed with:	cem
Relnotes:	yes
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D23677
2020-03-27 18:25:23 +00:00

367 lines
11 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (C) 2009-2011 Semihalf.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _DEV_CESA_H_
#define _DEV_CESA_H_
/* Maximum number of allocated sessions */
#define CESA_SESSIONS 64
/* Maximum number of queued requests */
#define CESA_REQUESTS 256
/*
* CESA is able to process data only in CESA SRAM, which is quite small (2 kB).
* We have to fit a packet there, which contains SA descriptor, keys, IV
* and data to be processed. Every request must be converted into chain of
* packets and each packet can hold about 1.75 kB of data.
*
* To process each packet we need at least 1 SA descriptor and at least 4 TDMA
* descriptors. However there are cases when we use 2 SA and 8 TDMA descriptors
* per packet. Number of used TDMA descriptors can increase beyond given values
* if data in the request is fragmented in physical memory.
*
* The driver uses preallocated SA and TDMA descriptors pools to get best
* performace. Size of these pools should match expected request size. Example:
*
* Expected average request size: 1.5 kB (Ethernet MTU)
* Packets per average request: (1.5 kB / 1.75 kB) = 1
* SA decriptors per average request (worst case): 1 * 2 = 2
* TDMA desctiptors per average request (worst case): 1 * 8 = 8
*
* More TDMA descriptors should be allocated, if data fragmentation is expected
* (for example while processing mbufs larger than MCLBYTES). The driver may use
* 2 additional TDMA descriptors per each discontinuity in the physical data
* layout.
*/
/* Values below are optimized for requests containing about 1.5 kB of data */
#define CESA_SA_DESC_PER_REQ 2
#define CESA_TDMA_DESC_PER_REQ 8
#define CESA_SA_DESCRIPTORS (CESA_SA_DESC_PER_REQ * CESA_REQUESTS)
#define CESA_TDMA_DESCRIPTORS (CESA_TDMA_DESC_PER_REQ * CESA_REQUESTS)
/* Useful constants */
#define CESA_HMAC_TRUNC_LEN 12
#define CESA_MAX_FRAGMENTS 64
#define CESA_SRAM_SIZE 2048
/*
* CESA_MAX_HASH_LEN is maximum length of hash generated by CESA.
* As CESA supports MD5, SHA1 and SHA-256 this equals to 32 bytes.
*/
#define CESA_MAX_HASH_LEN 32
#define CESA_MAX_KEY_LEN 32
#define CESA_MAX_IV_LEN 16
#define CESA_MAX_HMAC_BLOCK_LEN 64
#define CESA_MAX_MKEY_LEN CESA_MAX_HMAC_BLOCK_LEN
#define CESA_MAX_PACKET_SIZE (CESA_SRAM_SIZE - CESA_DATA(0))
#define CESA_MAX_REQUEST_SIZE 65535
/* Locking macros */
#define CESA_LOCK(sc, what) mtx_lock(&(sc)->sc_ ## what ## _lock)
#define CESA_UNLOCK(sc, what) mtx_unlock(&(sc)->sc_ ## what ## _lock)
#define CESA_LOCK_ASSERT(sc, what) \
mtx_assert(&(sc)->sc_ ## what ## _lock, MA_OWNED)
/* Registers read/write macros */
#define CESA_REG_READ(sc, reg) \
bus_read_4((sc)->sc_res[RES_CESA_REGS], (reg))
#define CESA_REG_WRITE(sc, reg, val) \
bus_write_4((sc)->sc_res[RES_CESA_REGS], (reg), (val))
#define CESA_TDMA_READ(sc, reg) \
bus_read_4((sc)->sc_res[RES_TDMA_REGS], (reg))
#define CESA_TDMA_WRITE(sc, reg, val) \
bus_write_4((sc)->sc_res[RES_TDMA_REGS], (reg), (val))
/* Generic allocator for objects */
#define CESA_GENERIC_ALLOC_LOCKED(sc, obj, pool) do { \
CESA_LOCK(sc, pool); \
\
if (STAILQ_EMPTY(&(sc)->sc_free_ ## pool)) \
obj = NULL; \
else { \
obj = STAILQ_FIRST(&(sc)->sc_free_ ## pool); \
STAILQ_REMOVE_HEAD(&(sc)->sc_free_ ## pool, \
obj ## _stq); \
} \
\
CESA_UNLOCK(sc, pool); \
} while (0)
#define CESA_GENERIC_FREE_LOCKED(sc, obj, pool) do { \
CESA_LOCK(sc, pool); \
STAILQ_INSERT_TAIL(&(sc)->sc_free_ ## pool, obj, \
obj ## _stq); \
CESA_UNLOCK(sc, pool); \
} while (0)
/* CESA SRAM offset calculation macros */
#define CESA_SA_DATA(member) \
(sizeof(struct cesa_sa_hdesc) + offsetof(struct cesa_sa_data, member))
#define CESA_DATA(offset) \
(sizeof(struct cesa_sa_hdesc) + sizeof(struct cesa_sa_data) + offset)
/* CESA memory and IRQ resources */
enum cesa_res_type {
RES_TDMA_REGS,
RES_CESA_REGS,
RES_CESA_IRQ,
RES_CESA_NUM
};
struct cesa_tdma_hdesc {
uint16_t cthd_byte_count;
uint16_t cthd_flags;
uint32_t cthd_src;
uint32_t cthd_dst;
uint32_t cthd_next;
};
struct cesa_sa_hdesc {
uint32_t cshd_config;
uint16_t cshd_enc_src;
uint16_t cshd_enc_dst;
uint32_t cshd_enc_dlen;
uint32_t cshd_enc_key;
uint16_t cshd_enc_iv;
uint16_t cshd_enc_iv_buf;
uint16_t cshd_mac_src;
uint16_t cshd_mac_total_dlen;
uint16_t cshd_mac_dst;
uint16_t cshd_mac_dlen;
uint16_t cshd_mac_iv_in;
uint16_t cshd_mac_iv_out;
};
struct cesa_sa_data {
uint8_t csd_key[CESA_MAX_KEY_LEN];
uint8_t csd_iv[CESA_MAX_IV_LEN];
uint8_t csd_hiv_in[CESA_MAX_HASH_LEN];
uint8_t csd_hiv_out[CESA_MAX_HASH_LEN];
uint8_t csd_hash[CESA_MAX_HASH_LEN];
};
struct cesa_dma_mem {
void *cdm_vaddr;
bus_addr_t cdm_paddr;
bus_dma_tag_t cdm_tag;
bus_dmamap_t cdm_map;
};
struct cesa_tdma_desc {
struct cesa_tdma_hdesc *ctd_cthd;
bus_addr_t ctd_cthd_paddr;
STAILQ_ENTRY(cesa_tdma_desc) ctd_stq;
};
struct cesa_sa_desc {
struct cesa_sa_hdesc *csd_cshd;
bus_addr_t csd_cshd_paddr;
STAILQ_ENTRY(cesa_sa_desc) csd_stq;
};
struct cesa_session {
uint32_t cs_config;
unsigned int cs_ivlen;
unsigned int cs_hlen;
unsigned int cs_mblen;
uint8_t cs_key[CESA_MAX_KEY_LEN];
uint8_t cs_aes_dkey[CESA_MAX_KEY_LEN];
uint8_t cs_hiv_in[CESA_MAX_HASH_LEN];
uint8_t cs_hiv_out[CESA_MAX_HASH_LEN];
};
struct cesa_request {
struct cesa_sa_data *cr_csd;
bus_addr_t cr_csd_paddr;
struct cryptop *cr_crp;
struct cesa_session *cr_cs;
bus_dmamap_t cr_dmap;
int cr_dmap_loaded;
STAILQ_HEAD(, cesa_tdma_desc) cr_tdesc;
STAILQ_HEAD(, cesa_sa_desc) cr_sdesc;
STAILQ_ENTRY(cesa_request) cr_stq;
};
struct cesa_packet {
STAILQ_HEAD(, cesa_tdma_desc) cp_copyin;
STAILQ_HEAD(, cesa_tdma_desc) cp_copyout;
unsigned int cp_size;
unsigned int cp_offset;
};
struct cesa_softc {
device_t sc_dev;
int32_t sc_cid;
uint32_t sc_soc_id;
struct resource *sc_res[RES_CESA_NUM];
void *sc_icookie;
bus_dma_tag_t sc_data_dtag;
int sc_error;
int sc_tperr;
uint8_t sc_cesa_engine_id;
struct mtx sc_sc_lock;
int sc_blocked;
/* TDMA descriptors pool */
struct mtx sc_tdesc_lock;
struct cesa_tdma_desc sc_tdesc[CESA_TDMA_DESCRIPTORS];
struct cesa_dma_mem sc_tdesc_cdm;
STAILQ_HEAD(, cesa_tdma_desc) sc_free_tdesc;
/* SA descriptors pool */
struct mtx sc_sdesc_lock;
struct cesa_sa_desc sc_sdesc[CESA_SA_DESCRIPTORS];
struct cesa_dma_mem sc_sdesc_cdm;
STAILQ_HEAD(, cesa_sa_desc) sc_free_sdesc;
/* Requests pool */
struct mtx sc_requests_lock;
struct cesa_request sc_requests[CESA_REQUESTS];
struct cesa_dma_mem sc_requests_cdm;
STAILQ_HEAD(, cesa_request) sc_free_requests;
STAILQ_HEAD(, cesa_request) sc_ready_requests;
STAILQ_HEAD(, cesa_request) sc_queued_requests;
struct mtx sc_sessions_lock;
/* CESA SRAM Address */
bus_addr_t sc_sram_base_pa;
vm_offset_t sc_sram_base_va;
bus_size_t sc_sram_size;
};
struct cesa_chain_info {
struct cesa_softc *cci_sc;
struct cesa_request *cci_cr;
uint32_t cci_config;
int cci_error;
};
/* CESA descriptors flags definitions */
#define CESA_CTHD_OWNED (1 << 15)
#define CESA_CSHD_MAC (0 << 0)
#define CESA_CSHD_ENC (1 << 0)
#define CESA_CSHD_MAC_AND_ENC (2 << 0)
#define CESA_CSHD_ENC_AND_MAC (3 << 0)
#define CESA_CSHD_OP_MASK (3 << 0)
#define CESA_CSHD_MD5 (4 << 4)
#define CESA_CSHD_SHA1 (5 << 4)
#define CESA_CSHD_SHA2_256 (1 << 4)
#define CESA_CSHD_MD5_HMAC (6 << 4)
#define CESA_CSHD_SHA1_HMAC (7 << 4)
#define CESA_CSHD_SHA2_256_HMAC (3 << 4)
#define CESA_CSHD_96_BIT_HMAC (1 << 7)
#define CESA_CSHD_DES (1 << 8)
#define CESA_CSHD_3DES (2 << 8)
#define CESA_CSHD_AES (3 << 8)
#define CESA_CSHD_DECRYPT (1 << 12)
#define CESA_CSHD_CBC (1 << 16)
#define CESA_CSHD_3DES_EDE (1 << 20)
#define CESA_CSH_AES_KLEN_128 (0 << 24)
#define CESA_CSH_AES_KLEN_192 (1 << 24)
#define CESA_CSH_AES_KLEN_256 (2 << 24)
#define CESA_CSH_AES_KLEN_MASK (3 << 24)
#define CESA_CSHD_FRAG_FIRST (1 << 30)
#define CESA_CSHD_FRAG_LAST (2U << 30)
#define CESA_CSHD_FRAG_MIDDLE (3U << 30)
/* CESA registers definitions */
#define CESA_ICR 0x0E20
#define CESA_ICR_ACCTDMA (1 << 7)
#define CESA_ICR_TPERR (1 << 12)
#define CESA_ICM 0x0E24
#define CESA_ICM_ACCTDMA CESA_ICR_ACCTDMA
#define CESA_ICM_TPERR CESA_ICR_TPERR
/* CESA TDMA registers definitions */
#define CESA_TDMA_ND 0x0830
#define CESA_TDMA_CR 0x0840
#define CESA_TDMA_CR_DBL128 (4 << 0)
#define CESA_TDMA_CR_ORDEN (1 << 4)
#define CESA_TDMA_CR_SBL128 (4 << 6)
#define CESA_TDMA_CR_NBS (1 << 11)
#define CESA_TDMA_CR_ENABLE (1 << 12)
#define CESA_TDMA_CR_FETCHND (1 << 13)
#define CESA_TDMA_CR_ACTIVE (1 << 14)
#define CESA_TDMA_NUM_OUTSTAND (2 << 16)
#define CESA_TDMA_ECR 0x08C8
#define CESA_TDMA_ECR_MISS (1 << 0)
#define CESA_TDMA_ECR_DOUBLE_HIT (1 << 1)
#define CESA_TDMA_ECR_BOTH_HIT (1 << 2)
#define CESA_TDMA_ECR_DATA_ERROR (1 << 3)
#define CESA_TDMA_EMR 0x08CC
#define CESA_TDMA_EMR_MISS CESA_TDMA_ECR_MISS
#define CESA_TDMA_EMR_DOUBLE_HIT CESA_TDMA_ECR_DOUBLE_HIT
#define CESA_TDMA_EMR_BOTH_HIT CESA_TDMA_ECR_BOTH_HIT
#define CESA_TDMA_EMR_DATA_ERROR CESA_TDMA_ECR_DATA_ERROR
/* CESA SA registers definitions */
#define CESA_SA_CMD 0x0E00
#define CESA_SA_CMD_ACTVATE (1 << 0)
#define CESA_SA_CMD_SHA2 (1 << 31)
#define CESA_SA_DPR 0x0E04
#define CESA_SA_CR 0x0E08
#define CESA_SA_CR_WAIT_FOR_TDMA (1 << 7)
#define CESA_SA_CR_ACTIVATE_TDMA (1 << 9)
#define CESA_SA_CR_MULTI_MODE (1 << 11)
#define CESA_SA_SR 0x0E0C
#define CESA_SA_SR_ACTIVE (1 << 0)
#define CESA_TDMA_SIZE 0x1000
#define CESA_CESA_SIZE 0x1000
#define CESA0_TDMA_ADDR 0x90000
#define CESA0_CESA_ADDR 0x9D000
#define CESA1_TDMA_ADDR 0x92000
#define CESA1_CESA_ADDR 0x9F000
#endif
Reference in New Issue View Git Blame Copy Permalink