freebsd-nq/sys/powerpc/powernv/opal_console.c
Justin Hibbits 0b1f36b6c5 Make ALT_BREAK_TO_DEBUGGER work with OPAL console
Match other consoles by using the higher level cngetc() in the interrupt
handler, so that kdb_alt_break() can check for console break.
2018-05-28 01:59:48 +00:00

565 lines
12 KiB
C

/*-
* Copyright (C) 2011,2015 by Nathan Whitehorn. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/kdb.h>
#include <sys/kernel.h>
#include <sys/priv.h>
#include <sys/systm.h>
#include <sys/module.h>
#include <sys/types.h>
#include <sys/conf.h>
#include <sys/cons.h>
#include <sys/proc.h>
#include <sys/tty.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/bus.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/uart/uart.h>
#include <dev/uart/uart_cpu.h>
#include <dev/uart/uart_bus.h>
#include "opal.h"
#include "uart_if.h"
struct uart_opal_softc {
device_t dev;
phandle_t node;
int vtermid;
struct tty *tp;
struct resource *irqres;
int irqrid;
struct callout callout;
void *sc_icookie;
int polltime;
struct mtx sc_mtx;
int protocol;
char opal_inbuf[16];
uint64_t inbuflen;
uint8_t outseqno;
};
static struct uart_opal_softc *console_sc = NULL;
#if defined(KDB)
static int alt_break_state;
#endif
enum {
OPAL_RAW, OPAL_HVSI
};
#define VS_DATA_PACKET_HEADER 0xff
#define VS_CONTROL_PACKET_HEADER 0xfe
#define VSV_SET_MODEM_CTL 0x01
#define VSV_MODEM_CTL_UPDATE 0x02
#define VSV_RENEGOTIATE_CONNECTION 0x03
#define VS_QUERY_PACKET_HEADER 0xfd
#define VSV_SEND_VERSION_NUMBER 0x01
#define VSV_SEND_MODEM_CTL_STATUS 0x02
#define VS_QUERY_RESPONSE_PACKET_HEADER 0xfc
static int uart_opal_probe(device_t dev);
static int uart_opal_attach(device_t dev);
static void uart_opal_intr(void *v);
static device_method_t uart_opal_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, uart_opal_probe),
DEVMETHOD(device_attach, uart_opal_attach),
DEVMETHOD_END
};
static driver_t uart_opal_driver = {
"uart",
uart_opal_methods,
sizeof(struct uart_opal_softc),
};
DRIVER_MODULE(uart_opal, opalcons, uart_opal_driver, uart_devclass, 0, 0);
static cn_probe_t uart_opal_cnprobe;
static cn_init_t uart_opal_cninit;
static cn_term_t uart_opal_cnterm;
static cn_getc_t uart_opal_cngetc;
static cn_putc_t uart_opal_cnputc;
static cn_grab_t uart_opal_cngrab;
static cn_ungrab_t uart_opal_cnungrab;
CONSOLE_DRIVER(uart_opal);
static void uart_opal_ttyoutwakeup(struct tty *tp);
static struct ttydevsw uart_opal_tty_class = {
.tsw_flags = TF_INITLOCK|TF_CALLOUT,
.tsw_outwakeup = uart_opal_ttyoutwakeup,
};
static struct {
char tmpbuf[16];
uint64_t size;
struct mtx mtx;
} opalcons_buffer;
static void
uart_opal_real_map_outbuffer(uint64_t *bufferp, uint64_t *lenp)
{
if (!mtx_initialized(&opalcons_buffer.mtx))
mtx_init(&opalcons_buffer.mtx, "uart_opal", NULL,
MTX_SPIN | MTX_QUIET | MTX_NOWITNESS);
if (!pmap_bootstrapped)
return;
mtx_lock_spin(&opalcons_buffer.mtx);
opalcons_buffer.size = *(uint64_t *)(*lenp) =
min(sizeof(opalcons_buffer.tmpbuf), *(uint64_t *)(*lenp));
memcpy(opalcons_buffer.tmpbuf, (void *)(*bufferp),
*(uint64_t *)(*lenp));
*bufferp = (uint64_t)opalcons_buffer.tmpbuf;
*lenp = (uint64_t)&opalcons_buffer.size;
}
static void
uart_opal_real_unmap_outbuffer(uint64_t *len)
{
if (!pmap_bootstrapped)
return;
mtx_assert(&opalcons_buffer.mtx, MA_OWNED);
*len = opalcons_buffer.size;
mtx_unlock_spin(&opalcons_buffer.mtx);
}
static int
uart_opal_probe_node(struct uart_opal_softc *sc)
{
phandle_t node = sc->node;
uint32_t reg;
char buf[64];
sc->inbuflen = 0;
sc->outseqno = 0;
if (OF_getprop(node, "device_type", buf, sizeof(buf)) <= 0)
return (ENXIO);
if (strcmp(buf, "serial") != 0)
return (ENXIO);
reg = -1;
OF_getencprop(node, "reg", &reg, sizeof(reg));
if (reg == -1)
return (ENXIO);
sc->vtermid = reg;
sc->node = node;
if (OF_getprop(node, "compatible", buf, sizeof(buf)) <= 0)
return (ENXIO);
if (strcmp(buf, "ibm,opal-console-raw") == 0) {
sc->protocol = OPAL_RAW;
return (0);
} else if (strcmp(buf, "ibm,opal-console-hvsi") == 0) {
sc->protocol = OPAL_HVSI;
return (0);
}
return (ENXIO);
}
static int
uart_opal_probe(device_t dev)
{
struct uart_opal_softc sc;
int err;
sc.node = ofw_bus_get_node(dev);
err = uart_opal_probe_node(&sc);
if (err != 0)
return (err);
device_set_desc(dev, "OPAL Serial Port");
return (err);
}
static void
uart_opal_cnprobe(struct consdev *cp)
{
char buf[64];
phandle_t input, chosen;
static struct uart_opal_softc sc;
if (opal_check() != 0)
goto fail;
if ((chosen = OF_finddevice("/chosen")) == -1)
goto fail;
/* Check if OF has an active stdin/stdout */
if (OF_getprop(chosen, "linux,stdout-path", buf, sizeof(buf)) <= 0)
goto fail;
input = OF_finddevice(buf);
if (input == -1)
goto fail;
sc.node = input;
if (uart_opal_probe_node(&sc) != 0)
goto fail;
mtx_init(&sc.sc_mtx, "uart_opal", NULL, MTX_SPIN | MTX_QUIET |
MTX_NOWITNESS);
cp->cn_pri = CN_NORMAL;
console_sc = &sc;
return;
fail:
cp->cn_pri = CN_DEAD;
return;
}
static int
uart_opal_attach(device_t dev)
{
struct uart_opal_softc *sc;
int unit;
sc = device_get_softc(dev);
sc->dev = dev;
sc->node = ofw_bus_get_node(dev);
uart_opal_probe_node(sc);
unit = device_get_unit(dev);
sc->tp = tty_alloc(&uart_opal_tty_class, sc);
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL,
MTX_SPIN | MTX_QUIET | MTX_NOWITNESS);
if (console_sc != NULL && console_sc->vtermid == sc->vtermid) {
device_printf(dev, "console\n");
sc->outseqno = console_sc->outseqno;
console_sc = sc;
sprintf(uart_opal_consdev.cn_name, "ttyu%r", unit);
tty_init_console(sc->tp, 0);
}
sc->irqrid = 0;
sc->irqres = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->irqrid,
RF_ACTIVE | RF_SHAREABLE);
if (sc->irqres != NULL) {
bus_setup_intr(dev, sc->irqres, INTR_TYPE_TTY | INTR_MPSAFE,
NULL, uart_opal_intr, sc, &sc->sc_icookie);
} else {
callout_init(&sc->callout, CALLOUT_MPSAFE);
sc->polltime = hz / 20;
if (sc->polltime < 1)
sc->polltime = 1;
callout_reset(&sc->callout, sc->polltime, uart_opal_intr, sc);
}
tty_makedev(sc->tp, NULL, "u%r", unit);
return (0);
}
static void
uart_opal_cninit(struct consdev *cp)
{
strcpy(cp->cn_name, "opalcons");
}
static void
uart_opal_cnterm(struct consdev *cp)
{
}
static int
uart_opal_get(struct uart_opal_softc *sc, void *buffer, size_t bufsize)
{
int err;
int hdr = 0;
if (sc->protocol == OPAL_RAW) {
uint64_t len = bufsize;
uint64_t olen = (uint64_t)&len;
uint64_t obuf = (uint64_t)buffer;
if (pmap_bootstrapped) {
olen = vtophys(&len);
obuf = vtophys(buffer);
}
err = opal_call(OPAL_CONSOLE_READ, sc->vtermid, olen, obuf);
if (err != OPAL_SUCCESS)
return (-1);
bufsize = len;
} else {
uart_lock(&sc->sc_mtx);
if (sc->inbuflen == 0) {
err = opal_call(OPAL_CONSOLE_READ, sc->vtermid,
&sc->inbuflen, sc->opal_inbuf);
if (err != OPAL_SUCCESS) {
uart_unlock(&sc->sc_mtx);
return (-1);
}
hdr = 1;
}
if (sc->inbuflen == 0) {
uart_unlock(&sc->sc_mtx);
return (0);
}
if (bufsize > sc->inbuflen)
bufsize = sc->inbuflen;
if (hdr == 1) {
sc->inbuflen = sc->inbuflen - 4;
/* The HVSI protocol has a 4 byte header, skip it */
memmove(&sc->opal_inbuf[0], &sc->opal_inbuf[4],
sc->inbuflen);
}
memcpy(buffer, sc->opal_inbuf, bufsize);
sc->inbuflen -= bufsize;
if (sc->inbuflen > 0)
memmove(&sc->opal_inbuf[0], &sc->opal_inbuf[bufsize],
sc->inbuflen);
uart_unlock(&sc->sc_mtx);
}
return (bufsize);
}
static int
uart_opal_put(struct uart_opal_softc *sc, void *buffer, size_t bufsize)
{
uint16_t seqno;
uint64_t len;
char cbuf[16];
int err;
uint64_t olen = (uint64_t)&len;
uint64_t obuf = (uint64_t)cbuf;
if (sc->protocol == OPAL_RAW) {
obuf = (uint64_t)buffer;
len = bufsize;
uart_opal_real_map_outbuffer(&obuf, &olen);
err = opal_call(OPAL_CONSOLE_WRITE, sc->vtermid, olen, obuf);
uart_opal_real_unmap_outbuffer(&len);
} else {
uart_lock(&sc->sc_mtx);
if (bufsize > 12)
bufsize = 12;
seqno = sc->outseqno++;
cbuf[0] = VS_DATA_PACKET_HEADER;
cbuf[1] = 4 + bufsize; /* total length */
cbuf[2] = (seqno >> 8) & 0xff;
cbuf[3] = seqno & 0xff;
memcpy(&cbuf[4], buffer, bufsize);
len = 4 + bufsize;
uart_opal_real_map_outbuffer(&obuf, &olen);
err = opal_call(OPAL_CONSOLE_WRITE, sc->vtermid, olen, obuf);
uart_opal_real_unmap_outbuffer(&len);
uart_unlock(&sc->sc_mtx);
len -= 4;
}
#if 0
if (err != OPAL_SUCCESS)
len = 0;
#endif
return (len);
}
static int
uart_opal_cngetc(struct consdev *cp)
{
unsigned char c;
int retval;
retval = uart_opal_get(console_sc, &c, 1);
if (retval != 1)
return (-1);
#if defined(KDB)
kdb_alt_break(c, &alt_break_state);
#endif
return (c);
}
static void
uart_opal_cnputc(struct consdev *cp, int c)
{
unsigned char ch = c;
int a;
if (1) {
/* Clear FIFO if needed. Must be repeated few times. */
for (a = 0; a < 20; a++) {
opal_call(OPAL_POLL_EVENTS, NULL);
}
}
uart_opal_put(console_sc, &ch, 1);
}
static void
uart_opal_cngrab(struct consdev *cp)
{
}
static void
uart_opal_cnungrab(struct consdev *cp)
{
}
static void
uart_opal_ttyoutwakeup(struct tty *tp)
{
struct uart_opal_softc *sc;
char buffer[8];
int len;
sc = tty_softc(tp);
while ((len = ttydisc_getc(tp, buffer, sizeof(buffer))) != 0)
uart_opal_put(sc, buffer, len);
}
static void
uart_opal_intr(void *v)
{
struct uart_opal_softc *sc = v;
struct tty *tp = sc->tp;
int c;
tty_lock(tp);
while ((c = uart_opal_cngetc(NULL)) > 0)
ttydisc_rint(tp, c, 0);
ttydisc_rint_done(tp);
tty_unlock(tp);
opal_call(OPAL_POLL_EVENTS, NULL);
if (sc->irqres == NULL)
callout_reset(&sc->callout, sc->polltime, uart_opal_intr, sc);
}
static int
opalcons_probe(device_t dev)
{
const char *name;
name = ofw_bus_get_name(dev);
if (name == NULL || strcmp(name, "consoles") != 0)
return (ENXIO);
device_set_desc(dev, "OPAL Consoles");
return (BUS_PROBE_SPECIFIC);
}
static int
opalcons_attach(device_t dev)
{
phandle_t child;
device_t cdev;
struct ofw_bus_devinfo *dinfo;
for (child = OF_child(ofw_bus_get_node(dev)); child != 0;
child = OF_peer(child)) {
dinfo = malloc(sizeof(*dinfo), M_DEVBUF, M_WAITOK | M_ZERO);
if (ofw_bus_gen_setup_devinfo(dinfo, child) != 0) {
free(dinfo, M_DEVBUF);
continue;
}
cdev = device_add_child(dev, NULL, -1);
if (cdev == NULL) {
device_printf(dev, "<%s>: device_add_child failed\n",
dinfo->obd_name);
ofw_bus_gen_destroy_devinfo(dinfo);
free(dinfo, M_DEVBUF);
continue;
}
device_set_ivars(cdev, dinfo);
}
return (bus_generic_attach(dev));
}
static const struct ofw_bus_devinfo *
opalcons_get_devinfo(device_t dev, device_t child)
{
return (device_get_ivars(child));
}
static device_method_t opalcons_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, opalcons_probe),
DEVMETHOD(device_attach, opalcons_attach),
/* ofw_bus interface */
DEVMETHOD(ofw_bus_get_devinfo, opalcons_get_devinfo),
DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat),
DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model),
DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name),
DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node),
DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type),
DEVMETHOD_END
};
static driver_t opalcons_driver = {
"opalcons",
opalcons_methods,
0
};
static devclass_t opalcons_devclass;
DRIVER_MODULE(opalcons, opal, opalcons_driver, opalcons_devclass, 0, 0);