0f7d454847
Workaround for buggy USB hardware not handling new SETUP packet before STATUS stage is complete, this allows xfers to endpoint0 to return a short frame. Submitted by: Hans Petter Selasky Reported by: me
347 lines
9.0 KiB
C
347 lines
9.0 KiB
C
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*-
|
|
* Copyright (c) 2007-2008 Hans Petter Selasky. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
|
|
#include <dev/usb/usb_mfunc.h>
|
|
#include <dev/usb/usb.h>
|
|
|
|
#include <dev/usb/usb_core.h>
|
|
#include <dev/usb/usb_busdma.h>
|
|
#include <dev/usb/usb_process.h>
|
|
#include <dev/usb/usb_sw_transfer.h>
|
|
#include <dev/usb/usb_util.h>
|
|
|
|
#include <dev/usb/usb_controller.h>
|
|
#include <dev/usb/usb_bus.h>
|
|
#include <dev/usb/controller/at91dci.h>
|
|
|
|
#include <sys/rman.h>
|
|
|
|
#include <arm/at91/at91_pmcvar.h>
|
|
#include <arm/at91/at91rm92reg.h>
|
|
#include <arm/at91/at91_pio_rm9200.h>
|
|
#include <arm/at91/at91_piovar.h>
|
|
|
|
#define MEM_RID 0
|
|
|
|
/* Pin Definitions - do they belong here or somewhere else ? */
|
|
|
|
#define VBUS_MASK AT91C_PIO_PB24
|
|
#define VBUS_BASE AT91RM92_PIOB_BASE
|
|
|
|
#define PULLUP_MASK AT91C_PIO_PB22
|
|
#define PULLUP_BASE AT91RM92_PIOB_BASE
|
|
|
|
static device_probe_t at91_udp_probe;
|
|
static device_attach_t at91_udp_attach;
|
|
static device_detach_t at91_udp_detach;
|
|
static device_shutdown_t at91_udp_shutdown;
|
|
|
|
struct at91_udp_softc {
|
|
struct at91dci_softc sc_dci; /* must be first */
|
|
struct at91_pmc_clock *sc_iclk;
|
|
struct at91_pmc_clock *sc_fclk;
|
|
struct resource *sc_vbus_irq_res;
|
|
void *sc_vbus_intr_hdl;
|
|
};
|
|
|
|
static void
|
|
at91_vbus_poll(struct at91_udp_softc *sc)
|
|
{
|
|
uint32_t temp;
|
|
uint8_t vbus_val;
|
|
|
|
/* XXX temporary clear interrupts here */
|
|
|
|
temp = at91_pio_gpio_clear_interrupt(VBUS_BASE);
|
|
|
|
/* just forward it */
|
|
|
|
vbus_val = at91_pio_gpio_get(VBUS_BASE, VBUS_MASK);
|
|
at91dci_vbus_interrupt(&sc->sc_dci, vbus_val);
|
|
}
|
|
|
|
static void
|
|
at91_udp_clocks_on(void *arg)
|
|
{
|
|
struct at91_udp_softc *sc = arg;
|
|
|
|
at91_pmc_clock_enable(sc->sc_iclk);
|
|
at91_pmc_clock_enable(sc->sc_fclk);
|
|
}
|
|
|
|
static void
|
|
at91_udp_clocks_off(void *arg)
|
|
{
|
|
struct at91_udp_softc *sc = arg;
|
|
|
|
at91_pmc_clock_disable(sc->sc_fclk);
|
|
at91_pmc_clock_disable(sc->sc_iclk);
|
|
}
|
|
|
|
static void
|
|
at91_udp_pull_up(void *arg)
|
|
{
|
|
at91_pio_gpio_set(PULLUP_BASE, PULLUP_MASK);
|
|
}
|
|
|
|
static void
|
|
at91_udp_pull_down(void *arg)
|
|
{
|
|
at91_pio_gpio_clear(PULLUP_BASE, PULLUP_MASK);
|
|
}
|
|
|
|
static int
|
|
at91_udp_probe(device_t dev)
|
|
{
|
|
device_set_desc(dev, "AT91 integrated AT91_UDP controller");
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
at91_udp_attach(device_t dev)
|
|
{
|
|
struct at91_udp_softc *sc = device_get_softc(dev);
|
|
int err;
|
|
int rid;
|
|
|
|
/* setup AT9100 USB device controller interface softc */
|
|
|
|
sc->sc_dci.sc_clocks_on = &at91_udp_clocks_on;
|
|
sc->sc_dci.sc_clocks_off = &at91_udp_clocks_off;
|
|
sc->sc_dci.sc_clocks_arg = sc;
|
|
sc->sc_dci.sc_pull_up = &at91_udp_pull_up;
|
|
sc->sc_dci.sc_pull_down = &at91_udp_pull_down;
|
|
sc->sc_dci.sc_pull_arg = sc;
|
|
|
|
/* initialise some bus fields */
|
|
sc->sc_dci.sc_bus.parent = dev;
|
|
sc->sc_dci.sc_bus.devices = sc->sc_dci.sc_devices;
|
|
sc->sc_dci.sc_bus.devices_max = AT91_MAX_DEVICES;
|
|
|
|
/* get all DMA memory */
|
|
if (usb2_bus_mem_alloc_all(&sc->sc_dci.sc_bus,
|
|
USB_GET_DMA_TAG(dev), NULL)) {
|
|
return (ENOMEM);
|
|
}
|
|
/*
|
|
* configure VBUS input pin, enable deglitch and enable
|
|
* interrupt :
|
|
*/
|
|
at91_pio_use_gpio(VBUS_BASE, VBUS_MASK);
|
|
at91_pio_gpio_input(VBUS_BASE, VBUS_MASK);
|
|
at91_pio_gpio_set_deglitch(VBUS_BASE, VBUS_MASK, 1);
|
|
at91_pio_gpio_set_interrupt(VBUS_BASE, VBUS_MASK, 1);
|
|
|
|
/*
|
|
* configure PULLUP output pin :
|
|
*/
|
|
at91_pio_use_gpio(PULLUP_BASE, PULLUP_MASK);
|
|
at91_pio_gpio_output(PULLUP_BASE, PULLUP_MASK, 0);
|
|
|
|
at91_udp_pull_down(sc);
|
|
|
|
/* wait 10ms for pulldown to stabilise */
|
|
usb2_pause_mtx(NULL, hz / 100);
|
|
|
|
sc->sc_iclk = at91_pmc_clock_ref("udc_clk");
|
|
sc->sc_fclk = at91_pmc_clock_ref("udpck");
|
|
|
|
rid = MEM_RID;
|
|
sc->sc_dci.sc_io_res =
|
|
bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid, RF_ACTIVE);
|
|
|
|
if (!(sc->sc_dci.sc_io_res)) {
|
|
err = ENOMEM;
|
|
goto error;
|
|
}
|
|
sc->sc_dci.sc_io_tag = rman_get_bustag(sc->sc_dci.sc_io_res);
|
|
sc->sc_dci.sc_io_hdl = rman_get_bushandle(sc->sc_dci.sc_io_res);
|
|
sc->sc_dci.sc_io_size = rman_get_size(sc->sc_dci.sc_io_res);
|
|
|
|
rid = 0;
|
|
sc->sc_dci.sc_irq_res =
|
|
bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
|
|
if (!(sc->sc_dci.sc_irq_res)) {
|
|
goto error;
|
|
}
|
|
rid = 1;
|
|
sc->sc_vbus_irq_res =
|
|
bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
|
|
if (!(sc->sc_vbus_irq_res)) {
|
|
goto error;
|
|
}
|
|
sc->sc_dci.sc_bus.bdev = device_add_child(dev, "usbus", -1);
|
|
if (!(sc->sc_dci.sc_bus.bdev)) {
|
|
goto error;
|
|
}
|
|
device_set_ivars(sc->sc_dci.sc_bus.bdev, &sc->sc_dci.sc_bus);
|
|
|
|
#if (__FreeBSD_version >= 700031)
|
|
err = bus_setup_intr(dev, sc->sc_dci.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
|
|
NULL, (driver_intr_t *)at91dci_interrupt, sc, &sc->sc_dci.sc_intr_hdl);
|
|
#else
|
|
err = bus_setup_intr(dev, sc->sc_dci.sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
|
|
(driver_intr_t *)at91dci_interrupt, sc, &sc->sc_dci.sc_intr_hdl);
|
|
#endif
|
|
if (err) {
|
|
sc->sc_dci.sc_intr_hdl = NULL;
|
|
goto error;
|
|
}
|
|
#if (__FreeBSD_version >= 700031)
|
|
err = bus_setup_intr(dev, sc->sc_vbus_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
|
|
NULL, (driver_intr_t *)at91_vbus_poll, sc, &sc->sc_vbus_intr_hdl);
|
|
#else
|
|
err = bus_setup_intr(dev, sc->sc_vbus_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
|
|
(driver_intr_t *)at91_vbus_poll, sc, &sc->sc_vbus_intr_hdl);
|
|
#endif
|
|
if (err) {
|
|
sc->sc_vbus_intr_hdl = NULL;
|
|
goto error;
|
|
}
|
|
err = at91dci_init(&sc->sc_dci);
|
|
if (!err) {
|
|
err = device_probe_and_attach(sc->sc_dci.sc_bus.bdev);
|
|
}
|
|
if (err) {
|
|
goto error;
|
|
} else {
|
|
/* poll VBUS one time */
|
|
at91_vbus_poll(sc);
|
|
}
|
|
return (0);
|
|
|
|
error:
|
|
at91_udp_detach(dev);
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
at91_udp_detach(device_t dev)
|
|
{
|
|
struct at91_udp_softc *sc = device_get_softc(dev);
|
|
device_t bdev;
|
|
int err;
|
|
|
|
if (sc->sc_dci.sc_bus.bdev) {
|
|
bdev = sc->sc_dci.sc_bus.bdev;
|
|
device_detach(bdev);
|
|
device_delete_child(dev, bdev);
|
|
}
|
|
/* during module unload there are lots of children leftover */
|
|
device_delete_all_children(dev);
|
|
|
|
/* disable Transceiver */
|
|
AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_TXVC, AT91_UDP_TXVC_DIS);
|
|
|
|
/* disable and clear all interrupts */
|
|
AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_IDR, 0xFFFFFFFF);
|
|
AT91_UDP_WRITE_4(&sc->sc_dci, AT91_UDP_ICR, 0xFFFFFFFF);
|
|
|
|
/* disable VBUS interrupt */
|
|
at91_pio_gpio_set_interrupt(VBUS_BASE, VBUS_MASK, 0);
|
|
|
|
if (sc->sc_vbus_irq_res && sc->sc_vbus_intr_hdl) {
|
|
err = bus_teardown_intr(dev, sc->sc_vbus_irq_res,
|
|
sc->sc_vbus_intr_hdl);
|
|
sc->sc_vbus_intr_hdl = NULL;
|
|
}
|
|
if (sc->sc_vbus_irq_res) {
|
|
bus_release_resource(dev, SYS_RES_IRQ, 1,
|
|
sc->sc_vbus_irq_res);
|
|
sc->sc_vbus_irq_res = NULL;
|
|
}
|
|
if (sc->sc_dci.sc_irq_res && sc->sc_dci.sc_intr_hdl) {
|
|
/*
|
|
* only call at91_udp_uninit() after at91_udp_init()
|
|
*/
|
|
at91dci_uninit(&sc->sc_dci);
|
|
|
|
err = bus_teardown_intr(dev, sc->sc_dci.sc_irq_res,
|
|
sc->sc_dci.sc_intr_hdl);
|
|
sc->sc_dci.sc_intr_hdl = NULL;
|
|
}
|
|
if (sc->sc_dci.sc_irq_res) {
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0,
|
|
sc->sc_dci.sc_irq_res);
|
|
sc->sc_dci.sc_irq_res = NULL;
|
|
}
|
|
if (sc->sc_dci.sc_io_res) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY, MEM_RID,
|
|
sc->sc_dci.sc_io_res);
|
|
sc->sc_dci.sc_io_res = NULL;
|
|
}
|
|
usb2_bus_mem_free_all(&sc->sc_dci.sc_bus, NULL);
|
|
|
|
/* disable clocks */
|
|
at91_pmc_clock_disable(sc->sc_iclk);
|
|
at91_pmc_clock_disable(sc->sc_fclk);
|
|
at91_pmc_clock_deref(sc->sc_fclk);
|
|
at91_pmc_clock_deref(sc->sc_iclk);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
at91_udp_shutdown(device_t dev)
|
|
{
|
|
struct at91_udp_softc *sc = device_get_softc(dev);
|
|
int err;
|
|
|
|
err = bus_generic_shutdown(dev);
|
|
if (err)
|
|
return (err);
|
|
|
|
at91dci_uninit(&sc->sc_dci);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t at91_udp_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, at91_udp_probe),
|
|
DEVMETHOD(device_attach, at91_udp_attach),
|
|
DEVMETHOD(device_detach, at91_udp_detach),
|
|
DEVMETHOD(device_shutdown, at91_udp_shutdown),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
|
|
{0, 0}
|
|
};
|
|
|
|
static driver_t at91_udp_driver = {
|
|
"at91_udp",
|
|
at91_udp_methods,
|
|
sizeof(struct at91_udp_softc),
|
|
};
|
|
|
|
static devclass_t at91_udp_devclass;
|
|
|
|
DRIVER_MODULE(at91_udp, atmelarm, at91_udp_driver, at91_udp_devclass, 0, 0);
|