freebsd-nq/module/zfs/vdev_disk.c
Brian Behlendorf 02730c333c Use cstyle -cpP in make cstyle check
Enable picky cstyle checks and resolve the new warnings.  The vast
majority of the changes needed were to handle minor issues with
whitespace formatting.  This patch contains no functional changes.

Non-whitespace changes are as follows:

* 8 times ; to { } in for/while loop
* fix missing ; in cmd/zed/agents/zfs_diagnosis.c
* comment (confim -> confirm)
* change endline , to ; in cmd/zpool/zpool_main.c
* a number of /* BEGIN CSTYLED */ /* END CSTYLED */ blocks
* /* CSTYLED */ markers
* change == 0 to !
* ulong to unsigned long in module/zfs/dsl_scan.c
* rearrangement of module_param lines in module/zfs/metaslab.c
* add { } block around statement after for_each_online_node

Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed-by: Håkan Johansson <f96hajo@chalmers.se>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5465
2016-12-12 10:46:26 -08:00

814 lines
20 KiB
C

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (C) 2008-2010 Lawrence Livermore National Security, LLC.
* Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
* Rewritten for Linux by Brian Behlendorf <behlendorf1@llnl.gov>.
* LLNL-CODE-403049.
* Copyright (c) 2012, 2015 by Delphix. All rights reserved.
*/
#include <sys/zfs_context.h>
#include <sys/spa.h>
#include <sys/vdev_disk.h>
#include <sys/vdev_impl.h>
#include <sys/abd.h>
#include <sys/fs/zfs.h>
#include <sys/zio.h>
#include <sys/sunldi.h>
char *zfs_vdev_scheduler = VDEV_SCHEDULER;
static void *zfs_vdev_holder = VDEV_HOLDER;
/*
* Virtual device vector for disks.
*/
typedef struct dio_request {
zio_t *dr_zio; /* Parent ZIO */
atomic_t dr_ref; /* References */
int dr_error; /* Bio error */
int dr_bio_count; /* Count of bio's */
struct bio *dr_bio[0]; /* Attached bio's */
} dio_request_t;
#ifdef HAVE_OPEN_BDEV_EXCLUSIVE
static fmode_t
vdev_bdev_mode(int smode)
{
fmode_t mode = 0;
ASSERT3S(smode & (FREAD | FWRITE), !=, 0);
if (smode & FREAD)
mode |= FMODE_READ;
if (smode & FWRITE)
mode |= FMODE_WRITE;
return (mode);
}
#else
static int
vdev_bdev_mode(int smode)
{
int mode = 0;
ASSERT3S(smode & (FREAD | FWRITE), !=, 0);
if ((smode & FREAD) && !(smode & FWRITE))
mode = MS_RDONLY;
return (mode);
}
#endif /* HAVE_OPEN_BDEV_EXCLUSIVE */
static uint64_t
bdev_capacity(struct block_device *bdev)
{
struct hd_struct *part = bdev->bd_part;
/* The partition capacity referenced by the block device */
if (part)
return (part->nr_sects << 9);
/* Otherwise assume the full device capacity */
return (get_capacity(bdev->bd_disk) << 9);
}
static void
vdev_disk_error(zio_t *zio)
{
#ifdef ZFS_DEBUG
printk("ZFS: zio error=%d type=%d offset=%llu size=%llu "
"flags=%x\n", zio->io_error, zio->io_type,
(u_longlong_t)zio->io_offset, (u_longlong_t)zio->io_size,
zio->io_flags);
#endif
}
/*
* Use the Linux 'noop' elevator for zfs managed block devices. This
* strikes the ideal balance by allowing the zfs elevator to do all
* request ordering and prioritization. While allowing the Linux
* elevator to do the maximum front/back merging allowed by the
* physical device. This yields the largest possible requests for
* the device with the lowest total overhead.
*/
static int
vdev_elevator_switch(vdev_t *v, char *elevator)
{
vdev_disk_t *vd = v->vdev_tsd;
struct block_device *bdev = vd->vd_bdev;
struct request_queue *q = bdev_get_queue(bdev);
char *device = bdev->bd_disk->disk_name;
int error;
/*
* Skip devices which are not whole disks (partitions).
* Device-mapper devices are excepted since they may be whole
* disks despite the vdev_wholedisk flag, in which case we can
* and should switch the elevator. If the device-mapper device
* does not have an elevator (i.e. dm-raid, dm-crypt, etc.) the
* "Skip devices without schedulers" check below will fail.
*/
if (!v->vdev_wholedisk && strncmp(device, "dm-", 3) != 0)
return (0);
/* Skip devices without schedulers (loop, ram, dm, etc) */
if (!q->elevator || !blk_queue_stackable(q))
return (0);
/* Leave existing scheduler when set to "none" */
if ((strncmp(elevator, "none", 4) == 0) && (strlen(elevator) == 4))
return (0);
#ifdef HAVE_ELEVATOR_CHANGE
error = elevator_change(q, elevator);
#else
/*
* For pre-2.6.36 kernels elevator_change() is not available.
* Therefore we fall back to using a usermodehelper to echo the
* elevator into sysfs; This requires /bin/echo and sysfs to be
* mounted which may not be true early in the boot process.
*/
#define SET_SCHEDULER_CMD \
"exec 0</dev/null " \
" 1>/sys/block/%s/queue/scheduler " \
" 2>/dev/null; " \
"echo %s"
{
char *argv[] = { "/bin/sh", "-c", NULL, NULL };
char *envp[] = { NULL };
argv[2] = kmem_asprintf(SET_SCHEDULER_CMD, device, elevator);
error = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC);
strfree(argv[2]);
}
#endif /* HAVE_ELEVATOR_CHANGE */
if (error)
printk("ZFS: Unable to set \"%s\" scheduler for %s (%s): %d\n",
elevator, v->vdev_path, device, error);
return (error);
}
/*
* Expanding a whole disk vdev involves invoking BLKRRPART on the
* whole disk device. This poses a problem, because BLKRRPART will
* return EBUSY if one of the disk's partitions is open. That's why
* we have to do it here, just before opening the data partition.
* Unfortunately, BLKRRPART works by dropping all partitions and
* recreating them, which means that for a short time window, all
* /dev/sdxN device files disappear (until udev recreates them).
* This means two things:
* - When we open the data partition just after a BLKRRPART, we
* can't do it using the normal device file path because of the
* obvious race condition with udev. Instead, we use reliable
* kernel APIs to get a handle to the new partition device from
* the whole disk device.
* - Because vdev_disk_open() initially needs to find the device
* using its path, multiple vdev_disk_open() invocations in
* short succession on the same disk with BLKRRPARTs in the
* middle have a high probability of failure (because of the
* race condition with udev). A typical situation where this
* might happen is when the zpool userspace tool does a
* TRYIMPORT immediately followed by an IMPORT. For this
* reason, we only invoke BLKRRPART in the module when strictly
* necessary (zpool online -e case), and rely on userspace to
* do it when possible.
*/
static struct block_device *
vdev_disk_rrpart(const char *path, int mode, vdev_disk_t *vd)
{
#if defined(HAVE_3ARG_BLKDEV_GET) && defined(HAVE_GET_GENDISK)
struct block_device *bdev, *result = ERR_PTR(-ENXIO);
struct gendisk *disk;
int error, partno;
bdev = vdev_bdev_open(path, vdev_bdev_mode(mode), zfs_vdev_holder);
if (IS_ERR(bdev))
return (bdev);
disk = get_gendisk(bdev->bd_dev, &partno);
vdev_bdev_close(bdev, vdev_bdev_mode(mode));
if (disk) {
bdev = bdget(disk_devt(disk));
if (bdev) {
error = blkdev_get(bdev, vdev_bdev_mode(mode), vd);
if (error == 0)
error = ioctl_by_bdev(bdev, BLKRRPART, 0);
vdev_bdev_close(bdev, vdev_bdev_mode(mode));
}
bdev = bdget_disk(disk, partno);
if (bdev) {
error = blkdev_get(bdev,
vdev_bdev_mode(mode) | FMODE_EXCL, vd);
if (error == 0)
result = bdev;
}
put_disk(disk);
}
return (result);
#else
return (ERR_PTR(-EOPNOTSUPP));
#endif /* defined(HAVE_3ARG_BLKDEV_GET) && defined(HAVE_GET_GENDISK) */
}
static int
vdev_disk_open(vdev_t *v, uint64_t *psize, uint64_t *max_psize,
uint64_t *ashift)
{
struct block_device *bdev = ERR_PTR(-ENXIO);
vdev_disk_t *vd;
int count = 0, mode, block_size;
/* Must have a pathname and it must be absolute. */
if (v->vdev_path == NULL || v->vdev_path[0] != '/') {
v->vdev_stat.vs_aux = VDEV_AUX_BAD_LABEL;
return (SET_ERROR(EINVAL));
}
/*
* Reopen the device if it's not currently open. Otherwise,
* just update the physical size of the device.
*/
if (v->vdev_tsd != NULL) {
ASSERT(v->vdev_reopening);
vd = v->vdev_tsd;
goto skip_open;
}
vd = kmem_zalloc(sizeof (vdev_disk_t), KM_SLEEP);
if (vd == NULL)
return (SET_ERROR(ENOMEM));
/*
* Devices are always opened by the path provided at configuration
* time. This means that if the provided path is a udev by-id path
* then drives may be recabled without an issue. If the provided
* path is a udev by-path path, then the physical location information
* will be preserved. This can be critical for more complicated
* configurations where drives are located in specific physical
* locations to maximize the systems tolerence to component failure.
* Alternatively, you can provide your own udev rule to flexibly map
* the drives as you see fit. It is not advised that you use the
* /dev/[hd]d devices which may be reordered due to probing order.
* Devices in the wrong locations will be detected by the higher
* level vdev validation.
*
* The specified paths may be briefly removed and recreated in
* response to udev events. This should be exceptionally unlikely
* because the zpool command makes every effort to verify these paths
* have already settled prior to reaching this point. Therefore,
* a ENOENT failure at this point is highly likely to be transient
* and it is reasonable to sleep and retry before giving up. In
* practice delays have been observed to be on the order of 100ms.
*/
mode = spa_mode(v->vdev_spa);
if (v->vdev_wholedisk && v->vdev_expanding)
bdev = vdev_disk_rrpart(v->vdev_path, mode, vd);
while (IS_ERR(bdev) && count < 50) {
bdev = vdev_bdev_open(v->vdev_path,
vdev_bdev_mode(mode), zfs_vdev_holder);
if (unlikely(PTR_ERR(bdev) == -ENOENT)) {
msleep(10);
count++;
} else if (IS_ERR(bdev)) {
break;
}
}
if (IS_ERR(bdev)) {
dprintf("failed open v->vdev_path=%s, error=%d count=%d\n",
v->vdev_path, -PTR_ERR(bdev), count);
kmem_free(vd, sizeof (vdev_disk_t));
return (SET_ERROR(-PTR_ERR(bdev)));
}
v->vdev_tsd = vd;
vd->vd_bdev = bdev;
skip_open:
/* Determine the physical block size */
block_size = vdev_bdev_block_size(vd->vd_bdev);
/* Clear the nowritecache bit, causes vdev_reopen() to try again. */
v->vdev_nowritecache = B_FALSE;
/* Inform the ZIO pipeline that we are non-rotational */
v->vdev_nonrot = blk_queue_nonrot(bdev_get_queue(vd->vd_bdev));
/* Physical volume size in bytes */
*psize = bdev_capacity(vd->vd_bdev);
/* TODO: report possible expansion size */
*max_psize = *psize;
/* Based on the minimum sector size set the block size */
*ashift = highbit64(MAX(block_size, SPA_MINBLOCKSIZE)) - 1;
/* Try to set the io scheduler elevator algorithm */
(void) vdev_elevator_switch(v, zfs_vdev_scheduler);
return (0);
}
static void
vdev_disk_close(vdev_t *v)
{
vdev_disk_t *vd = v->vdev_tsd;
if (v->vdev_reopening || vd == NULL)
return;
if (vd->vd_bdev != NULL)
vdev_bdev_close(vd->vd_bdev,
vdev_bdev_mode(spa_mode(v->vdev_spa)));
kmem_free(vd, sizeof (vdev_disk_t));
v->vdev_tsd = NULL;
}
static dio_request_t *
vdev_disk_dio_alloc(int bio_count)
{
dio_request_t *dr;
int i;
dr = kmem_zalloc(sizeof (dio_request_t) +
sizeof (struct bio *) * bio_count, KM_SLEEP);
if (dr) {
atomic_set(&dr->dr_ref, 0);
dr->dr_bio_count = bio_count;
dr->dr_error = 0;
for (i = 0; i < dr->dr_bio_count; i++)
dr->dr_bio[i] = NULL;
}
return (dr);
}
static void
vdev_disk_dio_free(dio_request_t *dr)
{
int i;
for (i = 0; i < dr->dr_bio_count; i++)
if (dr->dr_bio[i])
bio_put(dr->dr_bio[i]);
kmem_free(dr, sizeof (dio_request_t) +
sizeof (struct bio *) * dr->dr_bio_count);
}
static void
vdev_disk_dio_get(dio_request_t *dr)
{
atomic_inc(&dr->dr_ref);
}
static int
vdev_disk_dio_put(dio_request_t *dr)
{
int rc = atomic_dec_return(&dr->dr_ref);
/*
* Free the dio_request when the last reference is dropped and
* ensure zio_interpret is called only once with the correct zio
*/
if (rc == 0) {
zio_t *zio = dr->dr_zio;
int error = dr->dr_error;
vdev_disk_dio_free(dr);
if (zio) {
zio->io_error = error;
ASSERT3S(zio->io_error, >=, 0);
if (zio->io_error)
vdev_disk_error(zio);
zio_delay_interrupt(zio);
}
}
return (rc);
}
BIO_END_IO_PROTO(vdev_disk_physio_completion, bio, error)
{
dio_request_t *dr = bio->bi_private;
int rc;
if (dr->dr_error == 0) {
#ifdef HAVE_1ARG_BIO_END_IO_T
dr->dr_error = -(bio->bi_error);
#else
if (error)
dr->dr_error = -(error);
else if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
dr->dr_error = EIO;
#endif
}
/* Drop reference acquired by __vdev_disk_physio */
rc = vdev_disk_dio_put(dr);
}
static unsigned int
bio_map(struct bio *bio, void *bio_ptr, unsigned int bio_size)
{
unsigned int offset, size, i;
struct page *page;
offset = offset_in_page(bio_ptr);
for (i = 0; i < bio->bi_max_vecs; i++) {
size = PAGE_SIZE - offset;
if (bio_size <= 0)
break;
if (size > bio_size)
size = bio_size;
if (is_vmalloc_addr(bio_ptr))
page = vmalloc_to_page(bio_ptr);
else
page = virt_to_page(bio_ptr);
/*
* Some network related block device uses tcp_sendpage, which
* doesn't behave well when using 0-count page, this is a
* safety net to catch them.
*/
ASSERT3S(page_count(page), >, 0);
if (bio_add_page(bio, page, size, offset) != size)
break;
bio_ptr += size;
bio_size -= size;
offset = 0;
}
return (bio_size);
}
static unsigned int
bio_map_abd_off(struct bio *bio, abd_t *abd, unsigned int size, size_t off)
{
if (abd_is_linear(abd))
return (bio_map(bio, ((char *)abd_to_buf(abd)) + off, size));
return (abd_scatter_bio_map_off(bio, abd, size, off));
}
#ifndef bio_set_op_attrs
#define bio_set_op_attrs(bio, rw, flags) \
do { (bio)->bi_rw |= (rw)|(flags); } while (0)
#endif
static inline void
vdev_submit_bio_impl(struct bio *bio)
{
#ifdef HAVE_1ARG_SUBMIT_BIO
submit_bio(bio);
#else
submit_bio(0, bio);
#endif
}
static inline void
vdev_submit_bio(struct bio *bio)
{
#ifdef HAVE_CURRENT_BIO_TAIL
struct bio **bio_tail = current->bio_tail;
current->bio_tail = NULL;
vdev_submit_bio_impl(bio);
current->bio_tail = bio_tail;
#else
struct bio_list *bio_list = current->bio_list;
current->bio_list = NULL;
vdev_submit_bio_impl(bio);
current->bio_list = bio_list;
#endif
}
static int
__vdev_disk_physio(struct block_device *bdev, zio_t *zio,
size_t io_size, uint64_t io_offset, int rw, int flags)
{
dio_request_t *dr;
uint64_t abd_offset;
uint64_t bio_offset;
int bio_size, bio_count = 16;
int i = 0, error = 0;
#if defined(HAVE_BLK_QUEUE_HAVE_BLK_PLUG)
struct blk_plug plug;
#endif
ASSERT(zio != NULL);
ASSERT3U(io_offset + io_size, <=, bdev->bd_inode->i_size);
retry:
dr = vdev_disk_dio_alloc(bio_count);
if (dr == NULL)
return (ENOMEM);
if (zio && !(zio->io_flags & (ZIO_FLAG_IO_RETRY | ZIO_FLAG_TRYHARD)))
bio_set_flags_failfast(bdev, &flags);
dr->dr_zio = zio;
/*
* When the IO size exceeds the maximum bio size for the request
* queue we are forced to break the IO in multiple bio's and wait
* for them all to complete. Ideally, all pool users will set
* their volume block size to match the maximum request size and
* the common case will be one bio per vdev IO request.
*/
abd_offset = 0;
bio_offset = io_offset;
bio_size = io_size;
for (i = 0; i <= dr->dr_bio_count; i++) {
/* Finished constructing bio's for given buffer */
if (bio_size <= 0)
break;
/*
* By default only 'bio_count' bio's per dio are allowed.
* However, if we find ourselves in a situation where more
* are needed we allocate a larger dio and warn the user.
*/
if (dr->dr_bio_count == i) {
vdev_disk_dio_free(dr);
bio_count *= 2;
goto retry;
}
/* bio_alloc() with __GFP_WAIT never returns NULL */
dr->dr_bio[i] = bio_alloc(GFP_NOIO,
MIN(abd_nr_pages_off(zio->io_abd, bio_size, abd_offset),
BIO_MAX_PAGES));
if (unlikely(dr->dr_bio[i] == NULL)) {
vdev_disk_dio_free(dr);
return (ENOMEM);
}
/* Matching put called by vdev_disk_physio_completion */
vdev_disk_dio_get(dr);
dr->dr_bio[i]->bi_bdev = bdev;
BIO_BI_SECTOR(dr->dr_bio[i]) = bio_offset >> 9;
dr->dr_bio[i]->bi_end_io = vdev_disk_physio_completion;
dr->dr_bio[i]->bi_private = dr;
bio_set_op_attrs(dr->dr_bio[i], rw, flags);
/* Remaining size is returned to become the new size */
bio_size = bio_map_abd_off(dr->dr_bio[i], zio->io_abd,
bio_size, abd_offset);
/* Advance in buffer and construct another bio if needed */
abd_offset += BIO_BI_SIZE(dr->dr_bio[i]);
bio_offset += BIO_BI_SIZE(dr->dr_bio[i]);
}
/* Extra reference to protect dio_request during vdev_submit_bio */
vdev_disk_dio_get(dr);
#if defined(HAVE_BLK_QUEUE_HAVE_BLK_PLUG)
if (dr->dr_bio_count > 1)
blk_start_plug(&plug);
#endif
/* Submit all bio's associated with this dio */
for (i = 0; i < dr->dr_bio_count; i++)
if (dr->dr_bio[i])
vdev_submit_bio(dr->dr_bio[i]);
#if defined(HAVE_BLK_QUEUE_HAVE_BLK_PLUG)
if (dr->dr_bio_count > 1)
blk_finish_plug(&plug);
#endif
(void) vdev_disk_dio_put(dr);
return (error);
}
BIO_END_IO_PROTO(vdev_disk_io_flush_completion, bio, rc)
{
zio_t *zio = bio->bi_private;
#ifdef HAVE_1ARG_BIO_END_IO_T
int rc = bio->bi_error;
#endif
zio->io_error = -rc;
if (rc && (rc == -EOPNOTSUPP))
zio->io_vd->vdev_nowritecache = B_TRUE;
bio_put(bio);
ASSERT3S(zio->io_error, >=, 0);
if (zio->io_error)
vdev_disk_error(zio);
zio_interrupt(zio);
}
static int
vdev_disk_io_flush(struct block_device *bdev, zio_t *zio)
{
struct request_queue *q;
struct bio *bio;
q = bdev_get_queue(bdev);
if (!q)
return (ENXIO);
bio = bio_alloc(GFP_NOIO, 0);
/* bio_alloc() with __GFP_WAIT never returns NULL */
if (unlikely(bio == NULL))
return (ENOMEM);
bio->bi_end_io = vdev_disk_io_flush_completion;
bio->bi_private = zio;
bio->bi_bdev = bdev;
bio_set_op_attrs(bio, 0, VDEV_WRITE_FLUSH_FUA);
vdev_submit_bio(bio);
invalidate_bdev(bdev);
return (0);
}
static void
vdev_disk_io_start(zio_t *zio)
{
vdev_t *v = zio->io_vd;
vdev_disk_t *vd = v->vdev_tsd;
int rw, flags, error;
switch (zio->io_type) {
case ZIO_TYPE_IOCTL:
if (!vdev_readable(v)) {
zio->io_error = SET_ERROR(ENXIO);
zio_interrupt(zio);
return;
}
switch (zio->io_cmd) {
case DKIOCFLUSHWRITECACHE:
if (zfs_nocacheflush)
break;
if (v->vdev_nowritecache) {
zio->io_error = SET_ERROR(ENOTSUP);
break;
}
error = vdev_disk_io_flush(vd->vd_bdev, zio);
if (error == 0)
return;
zio->io_error = error;
if (error == ENOTSUP)
v->vdev_nowritecache = B_TRUE;
break;
default:
zio->io_error = SET_ERROR(ENOTSUP);
}
zio_execute(zio);
return;
case ZIO_TYPE_WRITE:
rw = WRITE;
#if defined(HAVE_BLK_QUEUE_HAVE_BIO_RW_UNPLUG)
flags = (1 << BIO_RW_UNPLUG);
#elif defined(REQ_UNPLUG)
flags = REQ_UNPLUG;
#else
flags = 0;
#endif
break;
case ZIO_TYPE_READ:
rw = READ;
#if defined(HAVE_BLK_QUEUE_HAVE_BIO_RW_UNPLUG)
flags = (1 << BIO_RW_UNPLUG);
#elif defined(REQ_UNPLUG)
flags = REQ_UNPLUG;
#else
flags = 0;
#endif
break;
default:
zio->io_error = SET_ERROR(ENOTSUP);
zio_interrupt(zio);
return;
}
zio->io_target_timestamp = zio_handle_io_delay(zio);
error = __vdev_disk_physio(vd->vd_bdev, zio,
zio->io_size, zio->io_offset, rw, flags);
if (error) {
zio->io_error = error;
zio_interrupt(zio);
return;
}
}
static void
vdev_disk_io_done(zio_t *zio)
{
/*
* If the device returned EIO, we revalidate the media. If it is
* determined the media has changed this triggers the asynchronous
* removal of the device from the configuration.
*/
if (zio->io_error == EIO) {
vdev_t *v = zio->io_vd;
vdev_disk_t *vd = v->vdev_tsd;
if (check_disk_change(vd->vd_bdev)) {
vdev_bdev_invalidate(vd->vd_bdev);
v->vdev_remove_wanted = B_TRUE;
spa_async_request(zio->io_spa, SPA_ASYNC_REMOVE);
}
}
}
static void
vdev_disk_hold(vdev_t *vd)
{
ASSERT(spa_config_held(vd->vdev_spa, SCL_STATE, RW_WRITER));
/* We must have a pathname, and it must be absolute. */
if (vd->vdev_path == NULL || vd->vdev_path[0] != '/')
return;
/*
* Only prefetch path and devid info if the device has
* never been opened.
*/
if (vd->vdev_tsd != NULL)
return;
/* XXX: Implement me as a vnode lookup for the device */
vd->vdev_name_vp = NULL;
vd->vdev_devid_vp = NULL;
}
static void
vdev_disk_rele(vdev_t *vd)
{
ASSERT(spa_config_held(vd->vdev_spa, SCL_STATE, RW_WRITER));
/* XXX: Implement me as a vnode rele for the device */
}
vdev_ops_t vdev_disk_ops = {
vdev_disk_open,
vdev_disk_close,
vdev_default_asize,
vdev_disk_io_start,
vdev_disk_io_done,
NULL,
vdev_disk_hold,
vdev_disk_rele,
VDEV_TYPE_DISK, /* name of this vdev type */
B_TRUE /* leaf vdev */
};
module_param(zfs_vdev_scheduler, charp, 0644);
MODULE_PARM_DESC(zfs_vdev_scheduler, "I/O scheduler");