Note: This is a modified README from the isdn4bsd 0.81.00 ftp-distribution.
In December 1998, i4b was integrated into the FreeBSD sourcetree
and so the following parts about FreeBSD may not apply completely
anymore.
For information of how isdn4bsd is integrated into FreeBSD now, please
read the file ROADMAP in this directory.
--------------------------------------------------------------------------------
isdn4bsd
========
beta Version 0.81.00 / May 1999
written by:
Hellmuth Michaelis
Hallstrasse 20
D-25462 Rellingen
voice: +49 4101 473574
fax: +49 4101 473575
email: hm@kts.org
-----
The isdn4bsd package is:
Copyright (c) 1997, 1999 by Hellmuth Michaelis. All rights reserved.
For details see the file LICENSE.
-----
isdn4bsd would not be what it is without
the help and support of many people,
see file ACKNOWLEDGMENTS !
-----
Vote with your wallet: in case you want to buy new ISDN hardware,
buy it from manufacturers who support the development of i4b,
for a list of supporters have a look at file ACKNOWLEDGMENTS!
-----
This package is postcard-ware:
==============================
The (for laywer infected places: optional) license fee for using
isdn4bsd is sending a picture postcard of your home town.
My address can be found at the top of this file.
--------------------------------------------------------------------------------
Contents:
---------
1. Disclaimer
2. What is isdn4bsd ?
3. Which BSD's are supported ?
4. Which ISDN cards are supported ?
5. Where do i find documentation for isdn4bsd ?
6. How do i install isdn4bsd ?
7. Where do i get support for isdn4bsd ?
8. Where do i get commercial support for isdn4bsd ?
9. How can i help and/or support isdn4bsd ?
10. How do i report bugs ?
11. Is there a mailing-list available for isdn4bsd ?
12. Where can i get isdn4bsd ?
13. What is the reward for reading everything in this file ?
1. Disclaimer:
--------------
It may be illegal in your country to connect an isdn4bsd based machine
using a passive ISDN card to the ISDN at your site because the protocol
stack of isdn4bsd, which is necessary to run passive cards, has not been
approved by the telecommunication certification authority of your country.
If in doubt, please contact your local ISDN provider !
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGE.
2. What is isdn4bsd ?
---------------------
Isdn4bsd (or in short i4b) is a package for interfacing a computer running
FreeBSD, NetBSD, OpenBSD or BSD/OS to the ISDN.
The only ISDN protocol currently supported is the BRI protocol specified in
I.430, Q.921 and Q.931; better known as DSS1 or Euro-ISDN.
Isdn4bsd allows you to make IP network connections by using either IP packets
sent in raw HDLC frames on the B channel or by using synchronous PPP.
For telephony, isdn4bsd can answer incoming phone calls like an answering
machine and now has preliminary dialout capabilities.
3. Which BSD's are supported ?
------------------------------
FreeBSD:
--------
I4b was integrated into FreeBSD in January 1999, so it is part
of FreeBSD-current and FreeBSD 3.1 (stable).
FreeBSD 2.2.x is no longer actively supported by i4b but there is
a good chance that this release will compile and run under 2.2.x.
This is the last i4b release which has support for FreeBSD < 3.x.
Please take the time to read the file FreeBSD/INSTALLATION (and
the other available documentation) carefully. Thank you!
NetBSD/i386:
------------
The NetBSD specific support and the Diehl driver was written by
Martin Husemann, (martin@rumolt.teuto.de). Since i do not intend
to run NetBSD and/or Diehl cards, i suggest contacting him in
case of problems in this two areas.
Martin has NetBSD/i386 running and is supporting isdn4bsd for
that platform as his time permits it.
NetBSD/Amiga:
-------------
The NetBSD/Amiga specific support was done by Ignatios Souvatzis,
(is@netbsd.org).
NetBSD/Atari:
-------------
The NetBSD/Atari specific support was done by Leo Weppelman,
(leo@netbsd.org).
NetBSD/Alpha:
-------------
This port is still experimental!
The NetBSD/Alpha specific support was done by Jan-Hinrich Fessel,
(oskar@zippo.unna.ping.de)
OpenBSD/i386:
-------------
The OpenBSD/i386 2.2 specific support was done by Bas Oude Nijeweme
(bon@serious.xs4all.nl). He reports that it is also running fine
under OpenBSD 2.3.
NOTICE:
=======
i4b on OpenBSD has not been tested for a long time now and everyone
who promised to maintain it so far disappeared without further notice.
Requests on the OpenBSD newsgroup and mailinglist were not answered.
In an attempt to maintain it, i tried to install OpenBSD on a machine
where FreeBSD ran for a long time but it seems OpenBSD can not be run
there, so i gave up.
Because of this, i4b is currently completely unsupported on OpenBSD!
--------------------------------------------------------------------
BSD/OS:
-------
The BSD/OS 4.0 specific support was done by Bert Driehuis. The
support is not yet complete. Please contact Bert directly in case
of questions regarding this at bert_driehuis@nl.compuware.com.
4. Which ISDN cards are supported ?
-----------------------------------
YES - card is supported for this OS
NO - card is NOT supported for this OS
EXP - card is in an experimental status for this OS
DEV - card driver is under development
??? - card status is unknown for this OS
Type (passive, ISA) FreeBSD NetBSD OpenBSD BSD/OS Notes
--------------------- ------- ------ ------- ------ -----------------------
AVM A1 YES YES ??? ???
AVM Fritz!CardClassic YES YES ??? ??? (Note 1)
Creatix ISDN-S0/8 YES YES ??? ??? ( = Teles S0/8 )
Creatix ISDN-S0/16 YES YES ??? ??? ( = Teles S0/16 )
Dr.Neuhaus Niccy 1008 YES YES ??? ??? ( = Teles S0/8 )
Dr.Neuhaus Niccy 1016 YES YES ??? ??? ( = Teles S0/16 )
ELSA PCC-16 YES ??? ??? ??? (Note 14)
ITK ix1 micro YES YES ??? ??? (Note 13)
Stollmann Tina-pp YES YES ??? ???
Teles S0/8 YES YES ??? ???
Teles S0/16 YES YES ??? ???
Teles S0/16.3 YES YES ??? YES (Note 4)
3Com/USR SportsterInt YES YES ??? ??? ( = Stollmann Tina-pp )
Type (passive, ISAPnP)FreeBSD NetBSD OpenBSD BSD/OS Notes
--------------------- ------- ------ ------- ------ -----------------------
AVM Fritz!Card PnP DEV NO NO NO (Note 1)
Asuscom I-IN100-ST-DV ??? ??? ??? ??? ( = Dynalink IS64PH )
Creatix ISDN-S0 PnP YES YES ??? ??? (Note 2)
Dr.Neuhaus Niccy GO@ YES YES ??? ??? (Note 2)
Dynalink IS64PH ??? ??? ??? ??? (Note 11)
ELSA 1000pro ISA YES YES ??? ??? (Note 3)
Sagem Cybermod YES YES ??? ??? ( = Niccy GO@ )
Sedlbauer Win Speed YES YES ??? ??? (Note 9)
Teles S0 PnP ??? ??? ??? ??? (Note 5)
3Com USR PnP internal DEV NO NO NO (under development)
Type (passive, PCI) FreeBSD NetBSD OpenBSD BSD/OS Notes
--------------------- ------- ------ ------- ------ -----------------------
ELSA 1000pro PCI YES YES ??? ???
AVM Fritz!Card PCI YES YES ??? ??? (Note 14)
Type (passive, PCMCIA)FreeBSD NetBSD OpenBSD BSD/OS Notes
--------------------- ------- ------ ------- ------ -----------------------
AVM Fritz!Card PCMCIA YES YES ??? ??? (Note 10)
ELSA ISDN/MC NO YES ??? ???
ELSA MC/ALL NO DEV ??? ???
Type (passive, SUPIO) FreeBSD NetBSD OpenBSD BSD/OS Notes
--------------------- ------- ------ ------- ------ -----------------------
ISDN Blaster NO YES ??? NO (Note 12, Amiga/NetBSD)
ISDN Master NO YES ??? NO (Note 12, Amiga/NetBSD)
ISDN Master II NO YES ??? NO (Note 12, Amiga/NetBSD)
Type (active, ISA) FreeBSD NetBSD OpenBSD BSD/OS Notes
--------------------- ------- ------ ------- ------ -----------------------
AVM B1 DEV NO NO NO (Note 6)
DiehlS,SX,SCOM,QUATRO NO DEV NO NO (Note 7)
Miro P1 DEV NO NO NO ( = Tina-dd )
Stollmann Tina-dd DEV NO NO NO (Note 8)
Note 1: Only the ISA, non-PnP AVM Fritz!Card ("Fritz!Card Classic") is
currently supported.
A driver for the Fritz!Card PnP is under development.
The "Teledat 150" sold by the german Telekom seems to be an AVM
Fritz!Card classic.
Note 2: FreeBSD
This is a PnP card. To run it under FreeBSD, you need
FreeBSD 2.2.6 RELEASE or higher.
NetBSD
The NetBSD version has not been verified to work yet.
Note 3: Due to its design, this card produces 128 IRQs/sec. This can be
reportedly stopped by disconnecting pin 12 of the 7474 and wiring
it to pin 15 of the 74175. Be careful! This procedure has not been
verified and doing this will immediately terminate your warranty !!
The card will not function anymore with drivers for other OSes and
you may not get any further support from the manufacturer! YMMV!
Note 4: Only the 16.3 is supported; the 16.3c and the 16.3 PnP are currently
unsupported !
Note 5: The card has not been verified to work yet.
Note 6: This driver is currently under development by Gary Jennejohn who
develops under FreeBSD only.
Note 7: This driver is currently under construction by Martin Husemann who
develops under NetBSD only.
Note 8: This driver is currently under development by Hellmuth Michaelis who
develops under FreeBSD only.
Note 9: This driver was developed by German Tischler, tanis@gaspode.franken.de.
Please contact him in case of trouble. The "Teledat 100" sold by the
german Telekom is identical with this card.
Note 10: This driver is developed by Matthias Apitz, matthias.apitz@sisis.de.
Please contact him in case of trouble. Please read the file
misc/README.PCCARD in the i4b distribution for additional installation
instructions.
Note 11: This driver was developed by Martijn Plak (tigrfhur@xs4all.nl)
This driver might also work for Asuscom cards. (Andrew Gordon
wrote: Just to let you know that I've now tried the i4b "dynalink"
driver with the ASUSCOM I-IN100-ST-DV card, and it appears to work
fine.)
Note: This driver is now unsupported as Martijn is no longer able
to maintain this driver.
Note 12: This driver was developed by Ignatios Souvatzis (is@netbsd.org)
Please contact him in case of trouble.
This driver is supposed to work on the ISDN Master versions and
lookalikes, like the ISDN Blaster, and on the ISDN Master II.
Note that the ISDN Master II does not AutoConfig(tm)ure in the
DraCo Zorro bus and thus only works in real Amigas. This is no
i4b problem, but general.
Note 13: This driver was developed by Martin Husemann, please contact him
in case of trouble.
Note 14: This driver was developed by Gary Jennejohn who develops under
FreeBSD only. In case of problems with this driver, please contact
him directly at garyj@muc.de.
5. Where do i find documentation for isdn4bsd ?
-----------------------------------------------
- For installation instructions have a look under the the FreeBSD, NetBSD
and OpenBSD directories, each of these contains a file "INSTALLATION"
which describes the installation procedure for isdn4bsd on those operating
systems.
- handbook/i4b.ps contains a handbook for isdn4bsd describing how i4b is
unpacked, configured, compiled and run on a FreeBSD system. With minor
differences this applies to the other supported Operating Systems as
well.
- Every program has a man page in the respective subdirectory and every
driver has a man page in the "man" subdirectory. All the man pages are
installed by running "make install" so its very easy to access them
(hint: try "apropos isdn4bsd" after you installed isdn4bsd, it displays
all available manual pages).
- misc/Overview contains a short technical overview of the inner workings
of isdn4bsd.
- misc/Resources contains URL's and ISBN's to more interesting ISDN related
stuff.
6. How do i install isdn4bsd ?
------------------------------
Read the instructions in the file {FreeBSD|NetBSD|OpenBSD|BSDI}/INSTALLATION.
In case they are incomplete, unclear, wrong or outdated, please send me an
update for inclusion into a future distribution!
The handbook contains detailed installation instructions for FreeBSD.
7. Where do i get support for isdn4bsd ?
----------------------------------------
I will support and help with isdn4bsd as my time permits it. Please
keep in mind that in this case support is given on a voluntary basis
and your questions might not be answered immediately.
Also, i recommend subscribing to the mailing list mentioned below.
Due to the experience gained supporting the predecessor of isdn4bsd, let
me please clearly state that there is no guarantee that your bug will be
fixed within some specific amount of time, in fact there is no guarantee
that your bug will be fixed at all; i'll do my best but there might be
more important things going on in my life than giving free support for
isdn4bsd. Some bugs seem to occur only in certain environments and are
not reproduceable here without access to the equipment you are connected
to or other equipment like ISDN simulators (which i don't get access to
for free): in this case you are the only person being able to trace down
the bug and fix it.
8. Where do i get commercial support for isdn4bsd ?
----------------------------------------------------
In case you want to pay for support, maintenance, enhancements, extensions
to isdn4bsd or whatever else you may need, it is possible to hire me for
reasonable rates through my employer HCS GmbH; in this case please contact
me for details at hm@hcs.de or look at http://www.freebsd-support.de.
9. How can i help and/or support isdn4bsd ?
-------------------------------------------
Send a postcard!
I really like to hear from you! (even if it runs out of the box :-)
I'm open for suggestions, bugreports, fixes, patches, enhancements and
comments to improve isdn4bsd.
Please send flames to /dev/null and/or start writing your own ISDN package.
Isdn4bsd is a project on a voluntary basis and writing and supporting
communication systems like isdn4bsd costs much money and much time.
Any contribution in terms of equipment, cards, documentation, cash
and/or daytime payed work on isdn4bsd would be highly appreciated.
You can help by not only reporting bugs, but by sending in a patch for
the problem together with a bugreport.
In case you cannot fix something yourself, please describe your problem
as detailed as possible, include information which version of an operating
system you are running, which ISDN board you are using, to which kind
of ISDN equipment (like the brand of PBX) you are connected etc. etc.
In case you want to get a currently unsupported card supported, write a
low level driver for it yourself and submit it. In case you can't write
it yourself there is a good chance to get it supported if you can donate
one of those cards and - if at all possible - docs for it.
10. How do i report bugs ?
--------------------------
Please submit patches ONLY as context diffs (diff -c)!
I vastly prefer receiving bug fixes and enhancements that are clearly
differentiated. I don't always know what to do with large patches that
contain many bugs and enhances folded into the same context diffs.
Please keep it to one fix or enhancement per patch!
If your change modifies the external interface of an isdn4bsd program,
i.e. more config options, command-line switches, new programs, etc.,
then please also include patches for the manual pages and documentation.
Thank you!
11. Is there a mailing-list available for isdn4bsd ?
---------------------------------------------------
There is a mailing list available at
freebsd-isdn@freebsd.org
The list is maintained by majordomo, so i.e. to subscribe,
send a mail with the text
subscribe freebsd-isdn
in the message body sent to
majordomo@freebsd.org
This mailing list is NOT (!) FreeBSD specific, everyone is welcome there!
12. Where can i get isdn4bsd ?
------------------------------
The isdn4bsd package is available from two sites:
- ftp://isdn4bsd@ftp.consol.de/pub
- http://www.freebsd-support.de/i4b
On ftp.consol.de, you must log in as user "isdn4bsd" and give your mail
address as the password. Then change to the "pub" directory. You will
find the latest available isdn4bsd package. Anonymous ftp as user "ftp"
or "anonymous" will not work.
13. What is the reward for reading everything in this file ?
------------------------------------------------------------
Have fun!
hellmuth
