Hiroki Sato 049087a0f3 Add $ipv6_cpe_wanif to enable functionality required for IPv6 CPE ... (r225485). When setting an interface name to it, the following configurations will be enabled: 1. "no_radr" is set to all IPv6 interfaces automatically. 2. "-no_radr accept_rtadv" will be set only for $ipv6_cpe_wanif. This is done just before evaluating $ifconfig_IF_ipv6 in the rc.d scripts (this means you can manually supersede this configuration if necessary). 3. The node will add RA-sending routers to the default router list even if net.inet6.ip6.forwarding=1. This mode is added to conform to RFC 6204 (a router which connects the end-user network to a service provider network). To enable packet forwarding, you still need to set ipv6_gateway_enable=YES. Note that accepting router entries into the default router list when packet forwarding capability and a routing daemon are enabled can result in messing up the routing table. To minimize such unexpected behaviors, "no_radr" is set on all interfaces but $ipv6_cpe_wanif. Approved by: re (bz)		2011-09-13 00:06:11 +00:00
..
bluetooth
defaults	Add $ipv6_cpe_wanif to enable functionality required for IPv6 CPE	2011-09-13 00:06:11 +00:00
devd	Regenerate usb.conf after r223566.	2011-06-27 20:32:19 +00:00
etc.amd64	Remove the reference to pseudo-terminals from the description.	2011-03-30 08:22:29 +00:00
etc.arm	Remove the reference to pseudo-terminals from the description.	2011-03-30 08:22:29 +00:00
etc.i386	Remove the reference to pseudo-terminals from the description.	2011-03-30 08:22:29 +00:00
etc.ia64	Remove the reference to pseudo-terminals from the description.	2011-03-30 08:22:29 +00:00
etc.mips	Remove the reference to pseudo-terminals from the description.	2011-03-30 08:22:29 +00:00
etc.pc98	Remove the reference to pseudo-terminals from the description.	2011-03-30 08:22:29 +00:00
etc.powerpc	Remove the reference to pseudo-terminals from the description.	2011-03-30 08:22:29 +00:00
etc.sparc64	Remove the reference to pseudo-terminals from the description.	2011-03-30 08:22:29 +00:00
gss
mail	o Add user 'hast'.	2011-01-31 07:47:28 +00:00
mtree	.. this wasn't supposed to be committed! sorry.	2011-06-26 14:29:49 +00:00
namedb	Commemorate the release of RFC 6303 by updating the comments regarding	2011-07-17 06:20:47 +00:00
pam.d	Forgot to commit this change along with r219563: pam_group(8) now issues	2011-03-15 10:13:35 +00:00
periodic	Add WITHOUT_UTMPX switch to the build system.	2011-06-17 21:30:21 +00:00
ppp	Remove COMPILATIONDATE from the default section. This string is no longer	2010-02-16 01:07:06 +00:00
rc.d	Add $ipv6_cpe_wanif to enable functionality required for IPv6 CPE	2011-09-13 00:06:11 +00:00
root	Switch the default terminal emulation style to xterm for most platforms.	2009-11-13 05:54:55 +00:00
sendmail	Minor change to force commit this file so new freebsd*.cf files are	2011-06-14 04:34:20 +00:00
amd.map
apmd.conf
auth.conf
crontab
csh.cshrc
csh.login	Change the commented msgs examples in profile/csh.login from -f to -q.	2010-05-15 17:49:56 +00:00
csh.logout
ddb.conf
devd.conf	Add example devd.conf entry.	2011-03-30 18:35:02 +00:00
devfs.conf
dhclient.conf
disktab
fbtab
freebsd-update.conf	Add support for backing up the old kernel when installing a new kernel	2009-08-19 20:47:31 +00:00
ftpusers	o Add user 'hast'.	2011-01-31 07:47:28 +00:00
gettytab	Fix spelling of "weirdo" in /etc/gettytab comment.	2010-07-12 19:09:18 +00:00
group	Add 'hast' user and 'hast' group that will be used by hastd (and maybe hastctl)	2011-01-28 22:28:12 +00:00
hosts
hosts.allow
hosts.equiv
hosts.lpd
inetd.conf	Add -k to the recommended fingerd(8) command line.	2010-04-01 13:13:09 +00:00
libalias.conf
login.access
login.conf	Remove vestiges of 'slip'.	2010-06-19 09:21:34 +00:00
mac.conf
Makefile	Revert r224760, and enhance the sed patterns from r224659 to comment out	2011-08-10 20:52:02 +00:00
man.alias
master.passwd	Change hast user home directory to /var/empty.	2011-01-28 22:29:38 +00:00
minfree
motd	Fix path to the handbook and provide a hint about how to install it if it	2011-08-26 14:05:48 +00:00
netconfig
netstart	/etc/rc.d/network_ipv6 was deprecated.	2010-08-05 15:11:03 +00:00
network.subr	Add $ipv6_cpe_wanif to enable functionality required for IPv6 CPE	2011-09-13 00:06:11 +00:00
networks
newsyslog.conf	Updated `flags' field description.	2011-05-03 12:22:46 +00:00
nls.alias
nscd.conf
nsmb.conf
nsswitch.conf	Revert r224760, and enhance the sed patterns from r224659 to comment out	2011-08-10 20:52:02 +00:00
ntp.conf	1) Use our vendor domain at the pool.	2009-07-13 05:51:33 +00:00
opieaccess
pccard_ether
pf.os	Sync pf.os with OpenBSD:	2011-09-08 23:46:07 +00:00
phones
portsnap.conf	Remove INDEX-6 from the default portsnap configuration file; the 6.x index	2010-12-30 01:13:42 +00:00
printcap
profile	Change the commented msgs examples in profile/csh.login from -f to -q.	2010-05-15 17:49:56 +00:00
protocols
rc	Rather than trusting that nothing is going to sneak in before the	2011-04-29 21:10:41 +00:00
rc.bsdextended
rc.firewall	Remove trailing white space. No functional changes.	2010-05-14 04:53:57 +00:00
rc.initdiskless	Remove trailing white space. No functional changes.	2010-05-14 04:53:57 +00:00
rc.resume	Consistently use full pathnames for external commands.	2010-08-13 21:23:13 +00:00
rc.sendmail
rc.shutdown
rc.subr	rc.subr: Make sure all functions are under if [ -z "${_rc_subr_loaded}" ].	2011-06-19 15:23:32 +00:00
rc.suspend	Consistently use full pathnames for external commands.	2010-08-13 21:23:13 +00:00
regdomain.xml	More Japan regulatory domain fixes:	2011-07-14 05:49:35 +00:00
remote
rpc
services	Add for existing protocol entries the missing SCTP port allocations	2010-11-13 17:52:04 +00:00
shells
snmpd.config	Add (disabled) sample configuration lines needed to enable snmp_target(3) module	2010-12-20 17:28:15 +00:00
sysctl.conf
syslog.conf
termcap.small	Fix termcap entry typo.	2011-02-09 10:06:31 +00:00