3f3f4cdba2
Of particular interest here is the ieee80211_radiotap(9) man page. TODO: Flesh out ieee80211_node.9, ieee80211_proto.9. Submitted by: bms (with help from Darron Broad)
215 lines
7.7 KiB
Groff
215 lines
7.7 KiB
Groff
.\"
|
|
.\" Copyright (c) 2004 Bruce M. Simpson <bms@spc.org>
|
|
.\" Copyright (c) 2004 Darron Broad <darron@kewl.org>
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions
|
|
.\" are met:
|
|
.\" 1. Redistributions of source code must retain the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer.
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
.\" SUCH DAMAGE.
|
|
.\"
|
|
.\" $FreeBSD$
|
|
.\" $Id: ieee80211_radiotap.9,v 1.3 2004/03/04 11:38:52 bruce Exp $
|
|
.\"
|
|
.Dd March 2, 2004
|
|
.Dt ieee80211_radiotap 9
|
|
.Os
|
|
.Sh NAME
|
|
.Nm ieee80211_radiotap
|
|
.Nd software 802.11 stack packet capture definitions
|
|
.Sh SYNOPSIS
|
|
.In net80211/ieee80211_var.h
|
|
.In net80211/ieee80211_ioctl.h
|
|
.In net80211/ieee80211_radiotap.h
|
|
.In net/bpf.h
|
|
.\"
|
|
.Sh DESCRIPTION
|
|
The
|
|
.Nm
|
|
definitions provide a device-independent
|
|
.Xr bpf 4
|
|
attachment for the
|
|
capture of information about 802.11 traffic which is not part of
|
|
the 802.11 frame structure.
|
|
.Pp
|
|
This typically includes information such as signal quality and
|
|
timestamps.
|
|
This information may be used by a variety of user agents, including
|
|
.Xr tcpdump 1 .
|
|
It is requested by using the
|
|
.Xr bpf 4
|
|
data-link type
|
|
.Vt DLT_IEEE_80211_RADIO .
|
|
.Pp
|
|
.\"
|
|
Each frame using this attachment has the following header prepended to it:
|
|
.Bd -literal -offset indent
|
|
struct ieee80211_radiotap_header {
|
|
u_int8_t it_version; /* set to 0 */
|
|
u_int8_t it_pad;
|
|
u_int16_t it_len; /* entire length */
|
|
u_int32_t it_present; /* fields present */
|
|
} __attribute__((__packed__));
|
|
.Ed
|
|
.Pp
|
|
.\"
|
|
A device driver implementing
|
|
.Vt radiotap
|
|
typically defines a packed structure embedding an instance of
|
|
.Vt struct ieee80211_radiotap_header
|
|
at the beginning,
|
|
with subsequent fields in the appropriate order,
|
|
and a macro to set the bits of the
|
|
.Vt it_present
|
|
bitmap to indicate which fields exist and are filled in by the driver.
|
|
.\"
|
|
.Pp
|
|
Radiotap headers are copied to the userland via a separate bpf attachment.
|
|
It is necessary for the driver to create this attachment after calling
|
|
.Fn ieee80211_ifattach
|
|
by calling
|
|
.Fn bpfattach2
|
|
with the data-link type set to
|
|
.Vt DLT_IEEE_80211_RADIO .
|
|
.Pp
|
|
.\"
|
|
When the the information is available,
|
|
usually immediately before a link-layer transmission or after a receive,
|
|
the driver copies it to the bpf layer using the
|
|
.Fn bpf_mtap2
|
|
function.
|
|
.Pp
|
|
.\"
|
|
The following extension fields are defined for
|
|
.Vt radiotap ,
|
|
in the order in which they should appear in the buffer copied to userland:
|
|
.Bl -tag -width ".Dv IEEE80211_RADIOTAP_DB_TX_ATTENUATION"
|
|
.It Dv IEEE80211_RADIOTAP_TSFT
|
|
This field contains the unsigned 64-bit value, in microseconds,
|
|
of the MAC's 802.11 Time Synchronization Function timer,
|
|
when the first bit of the MPDU arrived at the MAC.
|
|
This field should be present for received frames only.
|
|
.It Dv IEEE80211_RADIOTAP_FLAGS
|
|
This field contains a single unsigned 8-bit value, containing a bitmap
|
|
of flags specifying properties of the frame being transmitted or received.
|
|
.It Dv IEEE80211_RADIOTAP_RATE
|
|
This field contains a single unsigned 8-bit value, which is the data rate in
|
|
use in units of 500Kbps.
|
|
.It Dv IEEE80211_RADIOTAP_CHANNEL
|
|
This field contains two unsigned 16-bit values.
|
|
The first value is the frequency upon which this PDU was transmitted
|
|
or received.
|
|
The second value is a bitmap containing flags which specify properties of
|
|
the channel in use.
|
|
These are documented within the header file,
|
|
.In net80211/ieee80211_radiotap.h .
|
|
.It Dv IEEE80211_RADIOTAP_FHSS
|
|
This field contains two 8-bit values.
|
|
This field should be present for frequency-hopping radios only.
|
|
The first byte is the hop set.
|
|
The second byte is the pattern in use.
|
|
.It Dv IEEE80211_RADIOTAP_DBM_ANTSIGNAL
|
|
This field contains a single signed 8-bit value, which indicates the
|
|
RF signal power at the antenna, in decibels difference from 1mW.
|
|
.It Dv IEEE80211_RADIOTAP_DBM_ANTNOISE
|
|
This field contains a single signed 8-bit value, which indicates the
|
|
RF noise power at the antenna, in decibels difference from 1mW.
|
|
.It Dv IEEE80211_RADIOTAP_LOCK_QUALITY
|
|
This field contains a single unsigned 16-bit value, indicating the
|
|
quality of the Barker Code lock.
|
|
No unit is specified for this field.
|
|
There does not appear to be a standard way of measuring this at this time;
|
|
this quantity is often referred to as 'Signal Quality' in some datasheets.
|
|
.It Dv IEEE80211_RADIOTAP_TX_ATTENUATION
|
|
This field contains a single unsigned 16-bit value, expressing transmit
|
|
power as unitless distance from maximum power set at factory calibration.
|
|
0 indicates maximum transmit power.
|
|
Monotonically nondecreasing with lower power levels.
|
|
.It Dv IEEE80211_RADIOTAP_DB_TX_ATTENUATION
|
|
This field contains a single unsigned 16-bit value, expressing transmit
|
|
power as decibel distance from maximum power set at factory calibration.
|
|
0 indicates maximum transmit power.
|
|
Monotonically nondecreasing with lower power levels.
|
|
.It Dv IEEE80211_RADIOTAP_DBM_TX_POWER
|
|
Transmit power expressed as decibels from a 1mW reference.
|
|
This field is a single signed 8-bit value.
|
|
This is the absolute power level measured at the antenna port.
|
|
.It Dv IEEE80211_RADIOTAP_ANTENNA
|
|
For radios which support antenna diversity, this field contains a single
|
|
unsigned 8-bit value specifying which antenna is being used to transmit
|
|
or receive this frame.
|
|
The first antenna is antenna 0.
|
|
.It Dv IEEE80211_RADIOTAP_DB_ANTSIGNAL
|
|
This field contains a single unsigned 8-bit value, which indicates the
|
|
RF signal power at the antenna, in decibels difference from an
|
|
arbitrary, fixed reference.
|
|
.It Dv IEEE80211_RADIOTAP_DB_ANTNOISE
|
|
This field contains a single unsigned 8-bit value, which indicates the
|
|
RF noise power at the antenna, in decibels difference from an
|
|
arbitrary, fixed reference.
|
|
.It Dv IEEE80211_RADIOTAP_EXT
|
|
This bit is reserved for any future extensions to the
|
|
.Vt radiotap
|
|
structure.
|
|
It should not be used at this time.
|
|
.El
|
|
.Sh EXAMPLE
|
|
Radiotap header for the Cisco Aironet driver:
|
|
.Bd -literal -offset indent
|
|
struct an_rx_radiotap_header {
|
|
struct ieee80211_radiotap_header ar_ihdr;
|
|
u_int8_t ar_flags;
|
|
u_int8_t ar_rate;
|
|
u_int16_t ar_chan_freq;
|
|
u_int16_t ar_chan_flags;
|
|
u_int8_t ar_antsignal;
|
|
u_int8_t ar_antnoise;
|
|
} __attribute__((__packed__));
|
|
.Ed
|
|
.Pp
|
|
Bitmap indicating which fields are present in the above structure:
|
|
.Bd -literal -offset indent
|
|
#define AN_RX_RADIOTAP_PRESENT \\
|
|
((1 << IEEE80211_RADIOTAP_FLAGS) | \\
|
|
(1 << IEEE80211_RADIOTAP_RATE) | \\
|
|
(1 << IEEE80211_RADIOTAP_CHANNEL) | \\
|
|
(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | \\
|
|
(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE))
|
|
.Ed
|
|
.Sh SEE ALSO
|
|
.Xr bpf 4 ,
|
|
.Xr ieee80211 9
|
|
.Sh HISTORY
|
|
The
|
|
.Nm
|
|
definitions first appeared in
|
|
.Nx 1.5 ,
|
|
and were later ported to
|
|
.Fx 4.6 .
|
|
.Sh AUTHORS
|
|
The
|
|
.Nm
|
|
interface was designed and implemented by
|
|
.An David Young Aq dyoung@pobox.com .
|
|
.Pp
|
|
This manual page was written by
|
|
.An Bruce M. Simpson Aq bms@FreeBSD.org
|
|
and
|
|
.An Darron Broad Aq darron@kewl.org .
|