Luiz Otavio O Souza 05a92e03c3 Activate the device before attempt to access any of its registers. Without ... this change we may end up with a panic (Fatal kernel mode data abort: 'External Non-Linefetch Abort (S)') as described in http://e2e.ti.com/support/arm/sitara_arm/f/791/t/276862.aspx. It is now possible to bring up I2C1 and I2C2 on BBB. Approved by: adrian (mentor)		2013-12-09 11:51:17 +00:00
..
am335x	Fix a few typos on the scm (control module) pin mux definitions.	2013-12-09 11:33:45 +00:00
cpsw	Sweep up a bit of arm-land fallout after r257244; include necessary	2013-10-28 15:20:17 +00:00
omap3
omap4	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
twl	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
usb	Remove unused variables from the OMAP ehci code.	2012-10-01 05:15:13 +00:00
aintc.c	Properly clean "spurious interrupt" state	2013-04-06 03:31:28 +00:00
common.c
files.ti	Enable the ti_mbox and ti_pruss drivers.	2013-11-16 08:28:14 +00:00
std.ti	Set machine correctly on ARM. This allows universe to use the correct world	2012-08-18 05:48:19 +00:00
ti_cpuid.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
ti_cpuid.h	- Identify more devices for OMAP4 SoC (up to OMAP4470)	2013-01-07 23:30:53 +00:00
ti_edma3.c	After r239366, fix the ti_edma3.c driver to use the	2012-08-22 05:14:59 +00:00
ti_edma3.h
ti_gpio.c	Fix the pin value reading on AM335x. Because of the inverted logic it was	2013-12-06 18:09:10 +00:00
ti_i2c.c	Activate the device before attempt to access any of its registers. Without	2013-12-09 11:51:17 +00:00
ti_i2c.h
ti_machdep.c	Call initarm_lastaddr() later in the init sequence, after establishing	2013-11-05 02:57:34 +00:00
ti_mbox.c	Add a driver for the Texas Instruments Mailbox hardware.	2013-11-16 08:20:50 +00:00
ti_mbox.h	Add a driver for the Texas Instruments Mailbox hardware.	2013-11-16 08:20:50 +00:00
ti_mmchs.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
ti_mmchs.h	Don't clear the SYSCONFIG register on boot.	2013-07-06 04:18:34 +00:00
ti_prcm.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
ti_prcm.h	Define the uart clocks so that they can be en/disabled at runtime.	2013-08-21 04:20:17 +00:00
ti_pruss.c	Add a driver for the TI Programmable Realtime Unit Subsystem.	2013-11-16 08:23:15 +00:00
ti_pruss.h	Add a driver for the TI Programmable Realtime Unit Subsystem.	2013-11-16 08:23:15 +00:00
ti_scm.c	Remove #include <machine/frame.h> from all the arm code that doesn't	2013-10-27 01:34:10 +00:00
ti_scm.h
ti_sdhci.c	Bugfixes... the host capabilties from FDT data are stored in host.caps, not	2013-11-19 22:14:35 +00:00
ti_sdma.c
ti_sdma.h
ti_sdmareg.h
ti_smc.h
ti_smc.S
tivar.h