freebsd-nq/sys/sparc64/pci/ofw_pcibus.c
Thomas Moestl 1d80cb1b37 Add the new sparc64 OFW PCI framework, conditional on options OFW_NEWPCI
for now. It introduces a OFW PCI bus driver and a generic OFW PCI-PCI
bridge driver. By utilizing these, the PCI handling is much more elegant
now.

The advantages of the new approach are:
- Device enumeration should hopefully be more like on Solaris now,
  so unit numbers should match what's printed on the box more
  closely.
- Real interrupt routing is implemented now, so cardbus bridges
  etc. have at least a chance to work.
- The quirk tables are gone and have been replaced by (hopefully
  sufficient) heuristics.
- Much cleaner code.

There was also a report that previously bogus interrupt assignments
are fixed now, which can be attributed to the new heuristics.

A pitfall, and the reason why this is not the default yet, is that
it changes device enumeration, as mentioned above, which can make
it necessary to change the system configuration if more than one
unit of a device type is present (on a system with two hme cars,
for example, it is possible that hme0 becomes hme1 and vice versa
after enabling the option). Systems with multiple disk controllers
may need to be booted into single user (and require manual specification
of the root file system on boot) to adjust the fstab.
Nevertheless, I would like to encourage users to use this option,
so that it can be made the default soon.

In detail, the changes are:
- Introduce an OFW PCI bus driver; it inherits most methods from the
  generic PCI bus driver, but uses the firmware for enumeration,
  performs additional initialization for devices and firmware-specific
  interrupt routing. It also implements an OFW-specific method to allow
  child devices to get their firmware nodes.
- Introduce an OFW PCI-PCI bridge driver; again, it inherits most
  of the generic PCI-PCI bridge driver; it has it's own method for
  interrupt routing, as well as some sparc64-specific methods (one to
  get the node again, and one to adjust the bridge bus range, since
  we need to reenumerate all PCI buses).
- Convert the apb driver to the new way of handling things.
- Provide a common framework for OFW bridge drivers, used be the two
  drivers above.
- Provide a small common framework for interrupt routing (for all
  bridge types).
- Convert the psycho driver to the new framework; this gets rid of a
  bunch of old kludges in pci_read_config(), and the whole
  preinitialization  (ofw_pci_init()).
- Convert the ISA MD part and the EBus driver to the new way
  interrupts and nodes are handled.
- Introduce types for firmware interrupt properties.
- Rename the old sparcbus_if to ofw_pci_if by repo copy (it is only
  required for PCI), and move it to a more correct location (new
  support methodsx were also added, and an old one was deprecated).
- Fix a bunch of minor bugs, perform some cleanups.

In some cases, I introduced some minor code duplication to keep the
new code clean, in hopes that the old code will be unifdef'ed soon.

Reviewed in part by:	imp
Tested by:	jake, Marius Strobl <marius@alchemy.franken.de>,
		Sergey Mokryshev <mokr@mokr.net>,
		Chris Jackman <cjackNOSPAM@klatsch.org>
Info on u30 firmware provided by:	kris
2003-07-01 14:52:47 +00:00

265 lines
8.7 KiB
C

/*-
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* Copyright (c) 2000, Michael Smith <msmith@freebsd.org>
* Copyright (c) 2000, BSDi
* Copyright (c) 2003, Thomas Moestl <tmm@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "opt_ofw_pci.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/libkern.h>
#include <sys/module.h>
#include <sys/pciio.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_pci.h>
#include <machine/bus.h>
#include <machine/bus_common.h>
#include <machine/cache.h>
#include <machine/iommureg.h>
#include <machine/resource.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pci_private.h>
#include <sparc64/pci/ofw_pci.h>
#include "pcib_if.h"
#include "pci_if.h"
/* Helper functions. */
static void ofw_pcibus_setup_device(device_t, u_int, u_int, u_int);
/* Methods. */
static device_probe_t ofw_pcibus_probe;
static device_attach_t ofw_pcibus_attach;
static pci_assign_interrupt_t ofw_pcibus_assign_interrupt;
static ofw_pci_get_node_t ofw_pcibus_get_node;
static device_method_t ofw_pcibus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ofw_pcibus_probe),
DEVMETHOD(device_attach, ofw_pcibus_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, pci_print_child),
DEVMETHOD(bus_probe_nomatch, pci_probe_nomatch),
DEVMETHOD(bus_read_ivar, pci_read_ivar),
DEVMETHOD(bus_write_ivar, pci_write_ivar),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
DEVMETHOD(bus_get_resource_list, pci_get_resource_list),
DEVMETHOD(bus_set_resource, bus_generic_rl_set_resource),
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
DEVMETHOD(bus_delete_resource, pci_delete_resource),
DEVMETHOD(bus_alloc_resource, pci_alloc_resource),
DEVMETHOD(bus_release_resource, bus_generic_rl_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_child_pnpinfo_str, pci_child_pnpinfo_str_method),
DEVMETHOD(bus_child_location_str, pci_child_location_str_method),
/* PCI interface */
DEVMETHOD(pci_read_config, pci_read_config_method),
DEVMETHOD(pci_write_config, pci_write_config_method),
DEVMETHOD(pci_enable_busmaster, pci_enable_busmaster_method),
DEVMETHOD(pci_disable_busmaster, pci_disable_busmaster_method),
DEVMETHOD(pci_enable_io, pci_enable_io_method),
DEVMETHOD(pci_disable_io, pci_disable_io_method),
DEVMETHOD(pci_get_powerstate, pci_get_powerstate_method),
DEVMETHOD(pci_set_powerstate, pci_set_powerstate_method),
DEVMETHOD(pci_assign_interrupt, ofw_pcibus_assign_interrupt),
/* OFW PCI interface */
DEVMETHOD(ofw_pci_get_node, ofw_pcibus_get_node),
{ 0, 0 }
};
struct ofw_pcibus_devinfo {
struct pci_devinfo opd_dinfo;
phandle_t opd_node;
};
struct ofw_pcibus_softc {
phandle_t ops_node;
};
static driver_t ofw_pcibus_driver = {
"pci",
ofw_pcibus_methods,
sizeof(struct ofw_pcibus_softc),
};
DRIVER_MODULE(ofw_pcibus, pcib, ofw_pcibus_driver, pci_devclass, 0, 0);
MODULE_VERSION(ofw_pcibus, 1);
MODULE_DEPEND(ofw_pcibus, pci, 1, 1, 1);
static int
ofw_pcibus_probe(device_t dev)
{
if (ofw_pci_get_node(dev) == 0)
return (ENXIO);
device_set_desc(dev, "OFW PCI bus");
return (0);
}
/*
* Perform miscellaneous setups the firmware usually does not do for us.
*/
static void
ofw_pcibus_setup_device(device_t bridge, u_int busno, u_int slot, u_int func)
{
u_int lat, clnsz;
/*
* Initialize the latency timer register for busmaster devices to work
* properly. This is another task which the firmware does not always
* perform. The Min_Gnt register can be used to compute it's recommended
* value: it contains the desired latency in units of 1/4 us. To
* calculate the correct latency timer value, a bus clock of 33MHz and
* no wait states should be assumed.
*/
lat = PCIB_READ_CONFIG(bridge, busno, slot, func, PCIR_MINGNT, 1) *
33 / 4;
if (lat != 0) {
#ifdef OFW_PCI_DEBUG
device_printf(bridge, "device %d/%d/%d: latency timer %d -> "
"%d\n", busno, slot, func,
PCIB_READ_CONFIG(bridge, busno, slot, func,
PCIR_LATTIMER, 1), lat);
#endif /* OFW_PCI_DEBUG */
PCIB_WRITE_CONFIG(bridge, busno, slot, func,
PCIR_LATTIMER, imin(lat, 255), 1);
}
/*
* Compute a value to write into the cache line size register.
* The role of the streaming cache is unclear in write invalidate
* transfers, so it is made sure that it's line size is always reached.
*/
clnsz = imax(cache.ec_linesize, STRBUF_LINESZ);
KASSERT((clnsz / STRBUF_LINESZ) * STRBUF_LINESZ == clnsz &&
(clnsz / cache.ec_linesize) * cache.ec_linesize == clnsz &&
(clnsz / 4) * 4 == clnsz, ("bogus cache line size %d", clnsz));
PCIB_WRITE_CONFIG(bridge, busno, slot, func, PCIR_CACHELNSZ,
clnsz / 4, 1);
/*
* The preset in the intline register is usually wrong. Reset it to 255,
* so that the PCI code will reroute the interrupt if needed.
*/
PCIB_WRITE_CONFIG(bridge, busno, slot, func, PCIR_INTLINE,
PCI_INVALID_IRQ, 1);
}
static int
ofw_pcibus_attach(device_t dev)
{
device_t pcib = device_get_parent(dev);
struct ofw_pci_register pcir;
struct ofw_pcibus_devinfo *dinfo;
phandle_t node, child;
u_int slot, busno, func;
/*
* Ask the bridge for the bus number - in some cases, we need to
* renumber buses, so the firmware information cannot be trusted.
*/
busno = pcib_get_bus(dev);
if (bootverbose)
device_printf(dev, "physical bus=%d\n", busno);
node = ofw_pci_get_node(dev);
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
if (OF_getprop(child, "reg", &pcir, sizeof(pcir)) == -1)
panic("ofw_pci_attach: OF_getprop failed");
slot = OFW_PCI_PHYS_HI_DEVICE(pcir.phys_hi);
func = OFW_PCI_PHYS_HI_FUNCTION(pcir.phys_hi);
ofw_pcibus_setup_device(pcib, busno, slot, func);
dinfo = (struct ofw_pcibus_devinfo *)pci_read_device(pcib,
busno, slot, func, sizeof(*dinfo));
if (dinfo != NULL) {
dinfo->opd_node = child;
pci_add_child(dev, (struct pci_devinfo *)dinfo);
}
}
return (bus_generic_attach(dev));
}
static int
ofw_pcibus_assign_interrupt(device_t dev, device_t child)
{
struct ofw_pcibus_devinfo *dinfo = device_get_ivars(child);
pcicfgregs *cfg = &dinfo->opd_dinfo.cfg;
phandle_t node = ofw_pci_get_node(child);
ofw_pci_intr_t intr;
int isz;
isz = OF_getprop(node, "interrupts", &intr, sizeof(intr));
if (isz != sizeof(intr)) {
/* No property; our best guess is the intpin. */
intr = cfg->intpin;
} else if (intr >= 255) {
/*
* A fully specified interrupt (including IGN), as present on
* SPARCengine Ultra AX and e450. Extract the INO and return it.
*/
return (INTINO(intr));
}
/*
* If we got intr from a property, it may or may not be an intpin.
* For on-board devices, it frequently is not, and is completely out
* of the valid intpin range. For PCI slots, it hopefully is, otherwise
* we will have trouble interfacing with non-OFW buses such as cardbus.
* Since we cannot tell which it is without violating layering, we
* will always use the route_interrupt method, and treat exceptions on
* the level they become apparent.
*/
return (PCIB_ROUTE_INTERRUPT(device_get_parent(dev), child, intr));
}
static phandle_t
ofw_pcibus_get_node(device_t bus, device_t dev)
{
struct ofw_pcibus_devinfo *dinfo = device_get_ivars(dev);
return (dinfo->opd_node);
}