Adrian Chadd 9a4cf01f45 Add Atheros AR1111 support to the HAL. ... This seems to probe/attach as an AR9485 and thus nothing else besides adding the device id seems to be required. ath0: <Atheros AR1111> mem 0xf4800000-0xf487ffff irq 19 at device 0.0 on pci5 ath0: [HT] enabling HT modes ath0: [HT] enabling short-GI in 20MHz mode ath0: [HT] 1 stream STBC receive enabled ath0: [HT] 1 RX streams; 1 TX streams ath0: AR9485 mac 576.1 RF5110 phy 1926.8 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000 The NIC I have here is a 1 antenna, 2GHz only device. Thankyou to Jim Thompson <jim@netgate.com> for the AR1111 NIC. Tested: * AR1111 (pretending not to be an AR9485, but failing miserably); STA mode with powersave. Relnotes: yes Sponsored by: Netgate		2014-05-05 07:58:05 +00:00
..
acpica
ath/ath_hal/ar9300	Add Atheros AR1111 support to the HAL.	2014-05-05 07:58:05 +00:00
drm2/radeonkmsfw
ipw
iwi
iwn	Add firmware for Intel Centrino Wireless-N 105 devices.	2014-01-11 18:56:48 +00:00
mwl
npe
ral
rsu
run
uath
urtwn	Add preliminary support for the Realtek RTL8188EUS and RTL8188ETV chipsets.	2014-04-25 08:01:22 +00:00
wpi