e1b17582f4
if_watchdog/if_timer to NULL/0 when initializing an ifnet. if_alloc() sets those members to NULL/0 already.
4929 lines
137 KiB
C
4929 lines
137 KiB
C
/******************************************************************************
|
|
|
|
Copyright (c) 2001-2009, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
******************************************************************************/
|
|
/*$FreeBSD$*/
|
|
|
|
#ifdef HAVE_KERNEL_OPTION_HEADERS
|
|
#include "opt_device_polling.h"
|
|
#endif
|
|
|
|
#include "ixgbe.h"
|
|
|
|
/*********************************************************************
|
|
* Set this to one to display debug statistics
|
|
*********************************************************************/
|
|
int ixgbe_display_debug_stats = 0;
|
|
|
|
/*********************************************************************
|
|
* Driver version
|
|
*********************************************************************/
|
|
char ixgbe_driver_version[] = "1.8.9";
|
|
|
|
/*********************************************************************
|
|
* PCI Device ID Table
|
|
*
|
|
* Used by probe to select devices to load on
|
|
* Last field stores an index into ixgbe_strings
|
|
* Last entry must be all 0s
|
|
*
|
|
* { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index }
|
|
*********************************************************************/
|
|
|
|
static ixgbe_vendor_info_t ixgbe_vendor_info_array[] =
|
|
{
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AF_DUAL_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AF_SINGLE_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_CX4, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_DA_DUAL_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_CX4_DUAL_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_XF_LR, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_SFP_LOM, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_KX4, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_SFP, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_XAUI_LOM, 0, 0, 0},
|
|
/* required last entry */
|
|
{0, 0, 0, 0, 0}
|
|
};
|
|
|
|
/*********************************************************************
|
|
* Table of branding strings
|
|
*********************************************************************/
|
|
|
|
static char *ixgbe_strings[] = {
|
|
"Intel(R) PRO/10GbE PCI-Express Network Driver"
|
|
};
|
|
|
|
/*********************************************************************
|
|
* Function prototypes
|
|
*********************************************************************/
|
|
static int ixgbe_probe(device_t);
|
|
static int ixgbe_attach(device_t);
|
|
static int ixgbe_detach(device_t);
|
|
static int ixgbe_shutdown(device_t);
|
|
static void ixgbe_start(struct ifnet *);
|
|
static void ixgbe_start_locked(struct tx_ring *, struct ifnet *);
|
|
#if __FreeBSD_version >= 800000
|
|
static int ixgbe_mq_start(struct ifnet *, struct mbuf *);
|
|
static int ixgbe_mq_start_locked(struct ifnet *,
|
|
struct tx_ring *, struct mbuf *);
|
|
static void ixgbe_qflush(struct ifnet *);
|
|
#endif
|
|
static int ixgbe_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static void ixgbe_watchdog(struct adapter *);
|
|
static void ixgbe_init(void *);
|
|
static void ixgbe_init_locked(struct adapter *);
|
|
static void ixgbe_stop(void *);
|
|
static void ixgbe_media_status(struct ifnet *, struct ifmediareq *);
|
|
static int ixgbe_media_change(struct ifnet *);
|
|
static void ixgbe_identify_hardware(struct adapter *);
|
|
static int ixgbe_allocate_pci_resources(struct adapter *);
|
|
static int ixgbe_allocate_msix(struct adapter *);
|
|
static int ixgbe_allocate_legacy(struct adapter *);
|
|
static int ixgbe_allocate_queues(struct adapter *);
|
|
static int ixgbe_setup_msix(struct adapter *);
|
|
static void ixgbe_free_pci_resources(struct adapter *);
|
|
static void ixgbe_local_timer(void *);
|
|
static int ixgbe_hardware_init(struct adapter *);
|
|
static void ixgbe_setup_interface(device_t, struct adapter *);
|
|
|
|
static int ixgbe_allocate_transmit_buffers(struct tx_ring *);
|
|
static int ixgbe_setup_transmit_structures(struct adapter *);
|
|
static void ixgbe_setup_transmit_ring(struct tx_ring *);
|
|
static void ixgbe_initialize_transmit_units(struct adapter *);
|
|
static void ixgbe_free_transmit_structures(struct adapter *);
|
|
static void ixgbe_free_transmit_buffers(struct tx_ring *);
|
|
|
|
static int ixgbe_allocate_receive_buffers(struct rx_ring *);
|
|
static int ixgbe_setup_receive_structures(struct adapter *);
|
|
static int ixgbe_setup_receive_ring(struct rx_ring *);
|
|
static void ixgbe_initialize_receive_units(struct adapter *);
|
|
static void ixgbe_free_receive_structures(struct adapter *);
|
|
static void ixgbe_free_receive_buffers(struct rx_ring *);
|
|
|
|
static void ixgbe_init_moderation(struct adapter *);
|
|
static void ixgbe_enable_intr(struct adapter *);
|
|
static void ixgbe_disable_intr(struct adapter *);
|
|
static void ixgbe_update_stats_counters(struct adapter *);
|
|
static bool ixgbe_txeof(struct tx_ring *);
|
|
static bool ixgbe_rxeof(struct rx_ring *, int);
|
|
static void ixgbe_rx_checksum(u32, struct mbuf *);
|
|
static void ixgbe_set_promisc(struct adapter *);
|
|
static void ixgbe_disable_promisc(struct adapter *);
|
|
static void ixgbe_set_multi(struct adapter *);
|
|
static void ixgbe_print_hw_stats(struct adapter *);
|
|
static void ixgbe_print_debug_info(struct adapter *);
|
|
static void ixgbe_update_link_status(struct adapter *);
|
|
static int ixgbe_get_buf(struct rx_ring *, int, u8);
|
|
static int ixgbe_xmit(struct tx_ring *, struct mbuf **);
|
|
static int ixgbe_sysctl_stats(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_debug(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_set_flowcntl(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_dma_malloc(struct adapter *, bus_size_t,
|
|
struct ixgbe_dma_alloc *, int);
|
|
static void ixgbe_dma_free(struct adapter *, struct ixgbe_dma_alloc *);
|
|
static void ixgbe_add_rx_process_limit(struct adapter *, const char *,
|
|
const char *, int *, int);
|
|
static bool ixgbe_tx_ctx_setup(struct tx_ring *, struct mbuf *);
|
|
static bool ixgbe_tso_setup(struct tx_ring *, struct mbuf *, u32 *);
|
|
static void ixgbe_set_ivar(struct adapter *, u8, u8, s8);
|
|
static void ixgbe_configure_ivars(struct adapter *);
|
|
static u8 * ixgbe_mc_array_itr(struct ixgbe_hw *, u8 **, u32 *);
|
|
|
|
static void ixgbe_setup_vlan_hw_support(struct adapter *);
|
|
static void ixgbe_register_vlan(void *, struct ifnet *, u16);
|
|
static void ixgbe_unregister_vlan(void *, struct ifnet *, u16);
|
|
|
|
static void ixgbe_update_aim(struct rx_ring *);
|
|
|
|
/* Support for pluggable optic modules */
|
|
static bool ixgbe_sfp_probe(struct adapter *);
|
|
|
|
/* Legacy (single vector interrupt handler */
|
|
static void ixgbe_legacy_irq(void *);
|
|
|
|
/* The MSI/X Interrupt handlers */
|
|
static void ixgbe_msix_tx(void *);
|
|
static void ixgbe_msix_rx(void *);
|
|
static void ixgbe_msix_link(void *);
|
|
|
|
/* Deferred interrupt tasklets */
|
|
static void ixgbe_handle_tx(void *, int);
|
|
static void ixgbe_handle_rx(void *, int);
|
|
static void ixgbe_handle_link(void *, int);
|
|
static void ixgbe_handle_msf(void *, int);
|
|
static void ixgbe_handle_mod(void *, int);
|
|
|
|
|
|
/*********************************************************************
|
|
* FreeBSD Device Interface Entry Points
|
|
*********************************************************************/
|
|
|
|
static device_method_t ixgbe_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ixgbe_probe),
|
|
DEVMETHOD(device_attach, ixgbe_attach),
|
|
DEVMETHOD(device_detach, ixgbe_detach),
|
|
DEVMETHOD(device_shutdown, ixgbe_shutdown),
|
|
{0, 0}
|
|
};
|
|
|
|
static driver_t ixgbe_driver = {
|
|
"ix", ixgbe_methods, sizeof(struct adapter),
|
|
};
|
|
|
|
static devclass_t ixgbe_devclass;
|
|
DRIVER_MODULE(ixgbe, pci, ixgbe_driver, ixgbe_devclass, 0, 0);
|
|
|
|
MODULE_DEPEND(ixgbe, pci, 1, 1, 1);
|
|
MODULE_DEPEND(ixgbe, ether, 1, 1, 1);
|
|
|
|
/*
|
|
** TUNEABLE PARAMETERS:
|
|
*/
|
|
|
|
/*
|
|
** These parameters are used in Adaptive
|
|
** Interrupt Moderation. The value is set
|
|
** into EITR and controls the interrupt
|
|
** frequency. They can be modified but
|
|
** be careful in tuning them.
|
|
*/
|
|
static int ixgbe_enable_aim = TRUE;
|
|
TUNABLE_INT("hw.ixgbe.enable_aim", &ixgbe_enable_aim);
|
|
static int ixgbe_low_latency = IXGBE_LOW_LATENCY;
|
|
TUNABLE_INT("hw.ixgbe.low_latency", &ixgbe_low_latency);
|
|
static int ixgbe_ave_latency = IXGBE_AVE_LATENCY;
|
|
TUNABLE_INT("hw.ixgbe.ave_latency", &ixgbe_ave_latency);
|
|
static int ixgbe_bulk_latency = IXGBE_BULK_LATENCY;
|
|
TUNABLE_INT("hw.ixgbe.bulk_latency", &ixgbe_bulk_latency);
|
|
|
|
/* How many packets rxeof tries to clean at a time */
|
|
static int ixgbe_rx_process_limit = 100;
|
|
TUNABLE_INT("hw.ixgbe.rx_process_limit", &ixgbe_rx_process_limit);
|
|
|
|
/* Flow control setting, default to full */
|
|
static int ixgbe_flow_control = ixgbe_fc_full;
|
|
TUNABLE_INT("hw.ixgbe.flow_control", &ixgbe_flow_control);
|
|
|
|
/*
|
|
* MSIX should be the default for best performance,
|
|
* but this allows it to be forced off for testing.
|
|
*/
|
|
static int ixgbe_enable_msix = 1;
|
|
TUNABLE_INT("hw.ixgbe.enable_msix", &ixgbe_enable_msix);
|
|
|
|
/*
|
|
* Header split has seemed to be beneficial in
|
|
* all circumstances tested, so its on by default
|
|
* however this variable will allow it to be disabled
|
|
* for some debug purposes.
|
|
*/
|
|
static bool ixgbe_header_split = TRUE;
|
|
TUNABLE_INT("hw.ixgbe.hdr_split", &ixgbe_header_split);
|
|
|
|
/*
|
|
* Number of Queues, should normally
|
|
* be left at 0, it then autoconfigures to
|
|
* the number of cpus. Each queue is a pair
|
|
* of RX and TX rings with a dedicated interrupt
|
|
*/
|
|
static int ixgbe_num_queues = 0;
|
|
TUNABLE_INT("hw.ixgbe.num_queues", &ixgbe_num_queues);
|
|
|
|
/* Number of TX descriptors per ring */
|
|
static int ixgbe_txd = DEFAULT_TXD;
|
|
TUNABLE_INT("hw.ixgbe.txd", &ixgbe_txd);
|
|
|
|
/* Number of RX descriptors per ring */
|
|
static int ixgbe_rxd = DEFAULT_RXD;
|
|
TUNABLE_INT("hw.ixgbe.rxd", &ixgbe_rxd);
|
|
|
|
/* Total number of Interfaces - need for config sanity check */
|
|
static int ixgbe_total_ports;
|
|
|
|
/*
|
|
** Shadow VFTA table, this is needed because
|
|
** the real filter table gets cleared during
|
|
** a soft reset and we need to repopulate it.
|
|
*/
|
|
static u32 ixgbe_shadow_vfta[IXGBE_VFTA_SIZE];
|
|
|
|
/*
|
|
** The number of scatter-gather segments
|
|
** differs for 82598 and 82599, default to
|
|
** the former.
|
|
*/
|
|
static int ixgbe_num_segs = IXGBE_82598_SCATTER;
|
|
|
|
/*********************************************************************
|
|
* Device identification routine
|
|
*
|
|
* ixgbe_probe determines if the driver should be loaded on
|
|
* adapter based on PCI vendor/device id of the adapter.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixgbe_probe(device_t dev)
|
|
{
|
|
ixgbe_vendor_info_t *ent;
|
|
|
|
u16 pci_vendor_id = 0;
|
|
u16 pci_device_id = 0;
|
|
u16 pci_subvendor_id = 0;
|
|
u16 pci_subdevice_id = 0;
|
|
char adapter_name[256];
|
|
|
|
INIT_DEBUGOUT("ixgbe_probe: begin");
|
|
|
|
pci_vendor_id = pci_get_vendor(dev);
|
|
if (pci_vendor_id != IXGBE_INTEL_VENDOR_ID)
|
|
return (ENXIO);
|
|
|
|
pci_device_id = pci_get_device(dev);
|
|
pci_subvendor_id = pci_get_subvendor(dev);
|
|
pci_subdevice_id = pci_get_subdevice(dev);
|
|
|
|
ent = ixgbe_vendor_info_array;
|
|
while (ent->vendor_id != 0) {
|
|
if ((pci_vendor_id == ent->vendor_id) &&
|
|
(pci_device_id == ent->device_id) &&
|
|
|
|
((pci_subvendor_id == ent->subvendor_id) ||
|
|
(ent->subvendor_id == 0)) &&
|
|
|
|
((pci_subdevice_id == ent->subdevice_id) ||
|
|
(ent->subdevice_id == 0))) {
|
|
sprintf(adapter_name, "%s, Version - %s",
|
|
ixgbe_strings[ent->index],
|
|
ixgbe_driver_version);
|
|
device_set_desc_copy(dev, adapter_name);
|
|
++ixgbe_total_ports;
|
|
return (0);
|
|
}
|
|
ent++;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Device initialization routine
|
|
*
|
|
* The attach entry point is called when the driver is being loaded.
|
|
* This routine identifies the type of hardware, allocates all resources
|
|
* and initializes the hardware.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixgbe_attach(device_t dev)
|
|
{
|
|
struct adapter *adapter;
|
|
struct ixgbe_hw *hw;
|
|
int error = 0;
|
|
u16 pci_device_id;
|
|
u32 ctrl_ext;
|
|
|
|
INIT_DEBUGOUT("ixgbe_attach: begin");
|
|
|
|
/* Allocate, clear, and link in our adapter structure */
|
|
adapter = device_get_softc(dev);
|
|
adapter->dev = adapter->osdep.dev = dev;
|
|
hw = &adapter->hw;
|
|
|
|
/* Core Lock Init*/
|
|
IXGBE_CORE_LOCK_INIT(adapter, device_get_nameunit(dev));
|
|
|
|
/* Keep track of optics */
|
|
pci_device_id = pci_get_device(dev);
|
|
switch (pci_device_id) {
|
|
case IXGBE_DEV_ID_82598_CX4_DUAL_PORT :
|
|
case IXGBE_DEV_ID_82598EB_CX4 :
|
|
adapter->optics = IFM_10G_CX4;
|
|
break;
|
|
case IXGBE_DEV_ID_82598AF_DUAL_PORT :
|
|
case IXGBE_DEV_ID_82598_DA_DUAL_PORT :
|
|
case IXGBE_DEV_ID_82598AF_SINGLE_PORT :
|
|
case IXGBE_DEV_ID_82598AT :
|
|
adapter->optics = IFM_10G_SR;
|
|
break;
|
|
case IXGBE_DEV_ID_82598EB_XF_LR :
|
|
adapter->optics = IFM_10G_LR;
|
|
break;
|
|
case IXGBE_DEV_ID_82599_SFP :
|
|
adapter->optics = IFM_10G_SR;
|
|
ixgbe_num_segs = IXGBE_82599_SCATTER;
|
|
break;
|
|
case IXGBE_DEV_ID_82599_KX4 :
|
|
adapter->optics = IFM_10G_CX4;
|
|
ixgbe_num_segs = IXGBE_82599_SCATTER;
|
|
break;
|
|
case IXGBE_DEV_ID_82599_XAUI_LOM :
|
|
ixgbe_num_segs = IXGBE_82599_SCATTER;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* SYSCTL APIs */
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "stats", CTLTYPE_INT | CTLFLAG_RW,
|
|
adapter, 0, ixgbe_sysctl_stats, "I", "Statistics");
|
|
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "debug", CTLTYPE_INT | CTLFLAG_RW,
|
|
adapter, 0, ixgbe_sysctl_debug, "I", "Debug Info");
|
|
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "flow_control", CTLTYPE_INT | CTLFLAG_RW,
|
|
adapter, 0, ixgbe_set_flowcntl, "I", "Flow Control");
|
|
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "enable_aim", CTLTYPE_INT|CTLFLAG_RW,
|
|
&ixgbe_enable_aim, 1, "Interrupt Moderation");
|
|
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "low_latency", CTLTYPE_INT|CTLFLAG_RW,
|
|
&ixgbe_low_latency, 1, "Low Latency");
|
|
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "ave_latency", CTLTYPE_INT|CTLFLAG_RW,
|
|
&ixgbe_ave_latency, 1, "Average Latency");
|
|
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "bulk_latency", CTLTYPE_INT|CTLFLAG_RW,
|
|
&ixgbe_bulk_latency, 1, "Bulk Latency");
|
|
|
|
/* Set up the timer callout */
|
|
callout_init_mtx(&adapter->timer, &adapter->core_mtx, 0);
|
|
|
|
/* Determine hardware revision */
|
|
ixgbe_identify_hardware(adapter);
|
|
|
|
/* Do base PCI setup - map BAR0 */
|
|
if (ixgbe_allocate_pci_resources(adapter)) {
|
|
device_printf(dev, "Allocation of PCI resources failed\n");
|
|
error = ENXIO;
|
|
goto err_out;
|
|
}
|
|
|
|
/* Do descriptor calc and sanity checks */
|
|
if (((ixgbe_txd * sizeof(union ixgbe_adv_tx_desc)) % DBA_ALIGN) != 0 ||
|
|
ixgbe_txd < MIN_TXD || ixgbe_txd > MAX_TXD) {
|
|
device_printf(dev, "TXD config issue, using default!\n");
|
|
adapter->num_tx_desc = DEFAULT_TXD;
|
|
} else
|
|
adapter->num_tx_desc = ixgbe_txd;
|
|
|
|
/*
|
|
** With many RX rings it is easy to exceed the
|
|
** system mbuf allocation. Tuning nmbclusters
|
|
** can alleviate this.
|
|
*/
|
|
if (nmbclusters > 0 ) {
|
|
int s;
|
|
s = (ixgbe_rxd * adapter->num_queues) * ixgbe_total_ports;
|
|
if (s > nmbclusters) {
|
|
device_printf(dev, "RX Descriptors exceed "
|
|
"system mbuf max, using default instead!\n");
|
|
ixgbe_rxd = DEFAULT_RXD;
|
|
}
|
|
}
|
|
|
|
if (((ixgbe_rxd * sizeof(union ixgbe_adv_rx_desc)) % DBA_ALIGN) != 0 ||
|
|
ixgbe_rxd < MIN_TXD || ixgbe_rxd > MAX_TXD) {
|
|
device_printf(dev, "RXD config issue, using default!\n");
|
|
adapter->num_rx_desc = DEFAULT_RXD;
|
|
} else
|
|
adapter->num_rx_desc = ixgbe_rxd;
|
|
|
|
/* Allocate our TX/RX Queues */
|
|
if (ixgbe_allocate_queues(adapter)) {
|
|
error = ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
/* Initialize the shared code */
|
|
error = ixgbe_init_shared_code(hw);
|
|
if (error == IXGBE_ERR_SFP_NOT_PRESENT) {
|
|
/*
|
|
** No optics in this port, set up
|
|
** so the timer routine will probe
|
|
** for later insertion.
|
|
*/
|
|
adapter->sfp_probe = TRUE;
|
|
error = 0;
|
|
} else if (error == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,"Unsupported SFP+ module detected!\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
} else if (error) {
|
|
device_printf(dev,"Unable to initialize the shared code\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
}
|
|
|
|
/* Initialize the hardware */
|
|
if (ixgbe_hardware_init(adapter)) {
|
|
device_printf(dev,"Unable to initialize the hardware\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
}
|
|
|
|
if ((adapter->msix > 1) && (ixgbe_enable_msix))
|
|
error = ixgbe_allocate_msix(adapter);
|
|
else
|
|
error = ixgbe_allocate_legacy(adapter);
|
|
if (error)
|
|
goto err_late;
|
|
|
|
/* Setup OS specific network interface */
|
|
ixgbe_setup_interface(dev, adapter);
|
|
|
|
#ifdef IXGBE_IEEE1588
|
|
/*
|
|
** Setup the timer: IEEE 1588 support
|
|
*/
|
|
adapter->cycles.read = ixgbe_read_clock;
|
|
adapter->cycles.mask = (u64)-1;
|
|
adapter->cycles.mult = 1;
|
|
adapter->cycles.shift = IXGBE_TSYNC_SHIFT;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_TIMINCA, (1<<24) |
|
|
IXGBE_TSYNC_CYCLE_TIME * IXGBE_TSYNC_SHIFT);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_SYSTIML, 0x00000000);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_SYSTIMH, 0xFF800000);
|
|
|
|
// JFV - this is not complete yet
|
|
#endif
|
|
|
|
/* Sysctl for limiting the amount of work done in the taskqueue */
|
|
ixgbe_add_rx_process_limit(adapter, "rx_processing_limit",
|
|
"max number of rx packets to process", &adapter->rx_process_limit,
|
|
ixgbe_rx_process_limit);
|
|
|
|
/* Initialize statistics */
|
|
ixgbe_update_stats_counters(adapter);
|
|
|
|
/* Register for VLAN events */
|
|
adapter->vlan_attach = EVENTHANDLER_REGISTER(vlan_config,
|
|
ixgbe_register_vlan, adapter, EVENTHANDLER_PRI_FIRST);
|
|
adapter->vlan_detach = EVENTHANDLER_REGISTER(vlan_unconfig,
|
|
ixgbe_unregister_vlan, adapter, EVENTHANDLER_PRI_FIRST);
|
|
|
|
/* let hardware know driver is loaded */
|
|
ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
|
|
ctrl_ext |= IXGBE_CTRL_EXT_DRV_LOAD;
|
|
IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
|
|
|
|
INIT_DEBUGOUT("ixgbe_attach: end");
|
|
return (0);
|
|
err_late:
|
|
ixgbe_free_transmit_structures(adapter);
|
|
ixgbe_free_receive_structures(adapter);
|
|
err_out:
|
|
ixgbe_free_pci_resources(adapter);
|
|
return (error);
|
|
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Device removal routine
|
|
*
|
|
* The detach entry point is called when the driver is being removed.
|
|
* This routine stops the adapter and deallocates all the resources
|
|
* that were allocated for driver operation.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixgbe_detach(device_t dev)
|
|
{
|
|
struct adapter *adapter = device_get_softc(dev);
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
u32 ctrl_ext;
|
|
|
|
INIT_DEBUGOUT("ixgbe_detach: begin");
|
|
|
|
/* Make sure VLANS are not using driver */
|
|
if (adapter->ifp->if_vlantrunk != NULL) {
|
|
device_printf(dev,"Vlan in use, detach first\n");
|
|
return (EBUSY);
|
|
}
|
|
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_stop(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
if (txr->tq) {
|
|
taskqueue_drain(txr->tq, &txr->tx_task);
|
|
taskqueue_free(txr->tq);
|
|
}
|
|
}
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
if (rxr->tq) {
|
|
taskqueue_drain(rxr->tq, &rxr->rx_task);
|
|
taskqueue_free(rxr->tq);
|
|
}
|
|
}
|
|
|
|
/* Drain the Link queue */
|
|
if (adapter->tq) {
|
|
taskqueue_drain(adapter->tq, &adapter->link_task);
|
|
taskqueue_drain(adapter->tq, &adapter->mod_task);
|
|
taskqueue_drain(adapter->tq, &adapter->msf_task);
|
|
taskqueue_free(adapter->tq);
|
|
}
|
|
|
|
/* let hardware know driver is unloading */
|
|
ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
|
|
ctrl_ext &= ~IXGBE_CTRL_EXT_DRV_LOAD;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, ctrl_ext);
|
|
|
|
/* Unregister VLAN events */
|
|
if (adapter->vlan_attach != NULL)
|
|
EVENTHANDLER_DEREGISTER(vlan_config, adapter->vlan_attach);
|
|
if (adapter->vlan_detach != NULL)
|
|
EVENTHANDLER_DEREGISTER(vlan_unconfig, adapter->vlan_detach);
|
|
|
|
ether_ifdetach(adapter->ifp);
|
|
callout_drain(&adapter->timer);
|
|
ixgbe_free_pci_resources(adapter);
|
|
bus_generic_detach(dev);
|
|
if_free(adapter->ifp);
|
|
|
|
ixgbe_free_transmit_structures(adapter);
|
|
ixgbe_free_receive_structures(adapter);
|
|
|
|
IXGBE_CORE_LOCK_DESTROY(adapter);
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Shutdown entry point
|
|
*
|
|
**********************************************************************/
|
|
|
|
static int
|
|
ixgbe_shutdown(device_t dev)
|
|
{
|
|
struct adapter *adapter = device_get_softc(dev);
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_stop(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* Transmit entry point
|
|
*
|
|
* ixgbe_start is called by the stack to initiate a transmit.
|
|
* The driver will remain in this routine as long as there are
|
|
* packets to transmit and transmit resources are available.
|
|
* In case resources are not available stack is notified and
|
|
* the packet is requeued.
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_start_locked(struct tx_ring *txr, struct ifnet * ifp)
|
|
{
|
|
struct mbuf *m_head;
|
|
struct adapter *adapter = txr->adapter;
|
|
|
|
IXGBE_TX_LOCK_ASSERT(txr);
|
|
|
|
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING|IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING)
|
|
return;
|
|
if (!adapter->link_active)
|
|
return;
|
|
|
|
while (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
|
|
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
if (ixgbe_xmit(txr, &m_head)) {
|
|
if (m_head == NULL)
|
|
break;
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
|
|
break;
|
|
}
|
|
/* Send a copy of the frame to the BPF listener */
|
|
ETHER_BPF_MTAP(ifp, m_head);
|
|
|
|
/* Set timeout in case hardware has problems transmitting */
|
|
txr->watchdog_timer = IXGBE_TX_TIMEOUT;
|
|
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Legacy TX start - called by the stack, this
|
|
* always uses the first tx ring, and should
|
|
* not be used with multiqueue tx enabled.
|
|
*/
|
|
static void
|
|
ixgbe_start(struct ifnet *ifp)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
IXGBE_TX_LOCK(txr);
|
|
ixgbe_start_locked(txr, ifp);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
}
|
|
return;
|
|
}
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
/*
|
|
** Multiqueue Transmit driver
|
|
**
|
|
*/
|
|
static int
|
|
ixgbe_mq_start(struct ifnet *ifp, struct mbuf *m)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct tx_ring *txr;
|
|
int i = 0, err = 0;
|
|
|
|
/* Which queue to use */
|
|
if ((m->m_flags & M_FLOWID) != 0)
|
|
i = m->m_pkthdr.flowid % adapter->num_queues;
|
|
txr = &adapter->tx_rings[i];
|
|
|
|
if (IXGBE_TX_TRYLOCK(txr)) {
|
|
err = ixgbe_mq_start_locked(ifp, txr, m);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
} else
|
|
err = drbr_enqueue(ifp, txr->br, m);
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
ixgbe_mq_start_locked(struct ifnet *ifp, struct tx_ring *txr, struct mbuf *m)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct mbuf *next;
|
|
int err = 0;
|
|
|
|
if (((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) ||
|
|
(!adapter->link_active)) {
|
|
err = drbr_enqueue(ifp, txr->br, m);
|
|
return (err);
|
|
}
|
|
|
|
if (m == NULL) /* Called by tasklet */
|
|
goto process;
|
|
|
|
/* If nothing queued go right to xmit */
|
|
if (drbr_empty(ifp, txr->br)) {
|
|
if (ixgbe_xmit(txr, &m)) {
|
|
if (m && (err = drbr_enqueue(ifp, txr->br, m)) != 0)
|
|
return (err);
|
|
} else {
|
|
/* Success, update stats */
|
|
drbr_stats_update(ifp, m->m_pkthdr.len, m->m_flags);
|
|
/* Send a copy of the frame to the BPF listener */
|
|
ETHER_BPF_MTAP(ifp, m);
|
|
/* Set the watchdog */
|
|
txr->watchdog_timer = IXGBE_TX_TIMEOUT;
|
|
}
|
|
|
|
} else if ((err = drbr_enqueue(ifp, txr->br, m)) != 0)
|
|
return (err);
|
|
|
|
process:
|
|
if (drbr_empty(ifp, txr->br))
|
|
return (err);
|
|
|
|
/* Process the queue */
|
|
while (TRUE) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
break;
|
|
next = drbr_dequeue(ifp, txr->br);
|
|
if (next == NULL)
|
|
break;
|
|
if (ixgbe_xmit(txr, &next))
|
|
break;
|
|
ETHER_BPF_MTAP(ifp, next);
|
|
/* Set the watchdog */
|
|
txr->watchdog_timer = IXGBE_TX_TIMEOUT;
|
|
}
|
|
|
|
if (txr->tx_avail <= IXGBE_TX_OP_THRESHOLD)
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
** Flush all ring buffers
|
|
*/
|
|
static void
|
|
ixgbe_qflush(struct ifnet *ifp)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct mbuf *m;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
IXGBE_TX_LOCK(txr);
|
|
while ((m = buf_ring_dequeue_sc(txr->br)) != NULL)
|
|
m_freem(m);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
}
|
|
if_qflush(ifp);
|
|
}
|
|
#endif /* __FreeBSD_version >= 800000 */
|
|
|
|
/*********************************************************************
|
|
* Ioctl entry point
|
|
*
|
|
* ixgbe_ioctl is called when the user wants to configure the
|
|
* interface.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
**********************************************************************/
|
|
|
|
static int
|
|
ixgbe_ioctl(struct ifnet * ifp, u_long command, caddr_t data)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
#ifdef INET
|
|
struct ifaddr *ifa = (struct ifaddr *) data;
|
|
#endif
|
|
int error = 0;
|
|
|
|
switch (command) {
|
|
case SIOCSIFADDR:
|
|
#ifdef INET
|
|
IOCTL_DEBUGOUT("ioctl: SIOCxIFADDR (Get/Set Interface Addr)");
|
|
if (ifa->ifa_addr->sa_family == AF_INET) {
|
|
ifp->if_flags |= IFF_UP;
|
|
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_init_locked(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
}
|
|
arp_ifinit(ifp, ifa);
|
|
} else
|
|
#endif
|
|
ether_ioctl(ifp, command, data);
|
|
break;
|
|
case SIOCSIFMTU:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFMTU (Set Interface MTU)");
|
|
if (ifr->ifr_mtu > IXGBE_MAX_FRAME_SIZE - ETHER_HDR_LEN) {
|
|
error = EINVAL;
|
|
} else {
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
adapter->max_frame_size =
|
|
ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
|
|
ixgbe_init_locked(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
}
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFFLAGS (Set Interface Flags)");
|
|
IXGBE_CORE_LOCK(adapter);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING)) {
|
|
if ((ifp->if_flags ^ adapter->if_flags) &
|
|
(IFF_PROMISC | IFF_ALLMULTI)) {
|
|
ixgbe_disable_promisc(adapter);
|
|
ixgbe_set_promisc(adapter);
|
|
}
|
|
} else
|
|
ixgbe_init_locked(adapter);
|
|
} else
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
ixgbe_stop(adapter);
|
|
adapter->if_flags = ifp->if_flags;
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
IOCTL_DEBUGOUT("ioctl: SIOC(ADD|DEL)MULTI");
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_disable_intr(adapter);
|
|
ixgbe_set_multi(adapter);
|
|
ixgbe_enable_intr(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
}
|
|
break;
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCxIFMEDIA (Get/Set Interface Media)");
|
|
error = ifmedia_ioctl(ifp, ifr, &adapter->media, command);
|
|
break;
|
|
case SIOCSIFCAP:
|
|
{
|
|
int mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFCAP (Set Capabilities)");
|
|
if (mask & IFCAP_HWCSUM)
|
|
ifp->if_capenable ^= IFCAP_HWCSUM;
|
|
if (mask & IFCAP_TSO4)
|
|
ifp->if_capenable ^= IFCAP_TSO4;
|
|
if (mask & IFCAP_LRO)
|
|
ifp->if_capenable ^= IFCAP_LRO;
|
|
if (mask & IFCAP_VLAN_HWTAGGING)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
ixgbe_init(adapter);
|
|
VLAN_CAPABILITIES(ifp);
|
|
break;
|
|
}
|
|
|
|
#ifdef IXGBE_IEEE1588
|
|
/*
|
|
** IOCTL support for Precision Time (IEEE 1588) Support
|
|
*/
|
|
case SIOCSHWTSTAMP:
|
|
error = ixgbe_hwtstamp_ioctl(adapter, ifp);
|
|
break;
|
|
#endif
|
|
|
|
default:
|
|
IOCTL_DEBUGOUT1("ioctl: UNKNOWN (0x%X)\n", (int)command);
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Watchdog entry point
|
|
*
|
|
* This routine is called by the local timer
|
|
* to detect hardware hangs .
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_watchdog(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
bool tx_hang = FALSE;
|
|
|
|
IXGBE_CORE_LOCK_ASSERT(adapter);
|
|
|
|
/*
|
|
* The timer is set to 5 every time ixgbe_start() queues a packet.
|
|
* Then ixgbe_txeof() keeps resetting to 5 as long as it cleans at
|
|
* least one descriptor.
|
|
* Finally, anytime all descriptors are clean the timer is
|
|
* set to 0.
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
u32 head, tail;
|
|
|
|
IXGBE_TX_LOCK(txr);
|
|
if (txr->watchdog_timer == 0 || --txr->watchdog_timer) {
|
|
IXGBE_TX_UNLOCK(txr);
|
|
continue;
|
|
} else {
|
|
head = IXGBE_READ_REG(hw, IXGBE_TDH(i));
|
|
tail = IXGBE_READ_REG(hw, IXGBE_TDT(i));
|
|
if (head == tail) { /* last minute check */
|
|
IXGBE_TX_UNLOCK(txr);
|
|
continue;
|
|
}
|
|
/* Well, seems something is really hung */
|
|
tx_hang = TRUE;
|
|
IXGBE_TX_UNLOCK(txr);
|
|
break;
|
|
}
|
|
}
|
|
if (tx_hang == FALSE)
|
|
return;
|
|
|
|
/*
|
|
* If we are in this routine because of pause frames, then don't
|
|
* reset the hardware.
|
|
*/
|
|
if (IXGBE_READ_REG(hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF) {
|
|
txr = adapter->tx_rings; /* reset pointer */
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
IXGBE_TX_LOCK(txr);
|
|
txr->watchdog_timer = IXGBE_TX_TIMEOUT;
|
|
IXGBE_TX_UNLOCK(txr);
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
device_printf(adapter->dev, "Watchdog timeout -- resetting\n");
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
device_printf(dev,"Queue(%d) tdh = %d, hw tdt = %d\n", i,
|
|
IXGBE_READ_REG(hw, IXGBE_TDH(i)),
|
|
IXGBE_READ_REG(hw, IXGBE_TDT(i)));
|
|
device_printf(dev,"TX(%d) desc avail = %d,"
|
|
"Next TX to Clean = %d\n",
|
|
i, txr->tx_avail, txr->next_tx_to_clean);
|
|
}
|
|
adapter->ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
adapter->watchdog_events++;
|
|
|
|
ixgbe_init_locked(adapter);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Init entry point
|
|
*
|
|
* This routine is used in two ways. It is used by the stack as
|
|
* init entry point in network interface structure. It is also used
|
|
* by the driver as a hw/sw initialization routine to get to a
|
|
* consistent state.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
**********************************************************************/
|
|
#define IXGBE_MHADD_MFS_SHIFT 16
|
|
|
|
static void
|
|
ixgbe_init_locked(struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp = adapter->ifp;
|
|
device_t dev = adapter->dev;
|
|
struct ixgbe_hw *hw;
|
|
u32 k, txdctl, mhadd, gpie;
|
|
u32 rxdctl, rxctrl;
|
|
int err;
|
|
|
|
INIT_DEBUGOUT("ixgbe_init: begin");
|
|
|
|
hw = &adapter->hw;
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
|
|
ixgbe_stop(adapter);
|
|
|
|
/* Get the latest mac address, User can use a LAA */
|
|
bcopy(IF_LLADDR(adapter->ifp), adapter->hw.mac.addr,
|
|
IXGBE_ETH_LENGTH_OF_ADDRESS);
|
|
ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, 1);
|
|
adapter->hw.addr_ctrl.rar_used_count = 1;
|
|
|
|
/* Initialize the hardware */
|
|
if (ixgbe_hardware_init(adapter)) {
|
|
device_printf(dev, "Unable to initialize the hardware\n");
|
|
return;
|
|
}
|
|
|
|
/* Prepare transmit descriptors and buffers */
|
|
if (ixgbe_setup_transmit_structures(adapter)) {
|
|
device_printf(dev,"Could not setup transmit structures\n");
|
|
ixgbe_stop(adapter);
|
|
return;
|
|
}
|
|
|
|
ixgbe_initialize_transmit_units(adapter);
|
|
|
|
/* Setup Multicast table */
|
|
ixgbe_set_multi(adapter);
|
|
|
|
/*
|
|
** Determine the correct mbuf pool
|
|
** for doing jumbo/headersplit
|
|
*/
|
|
if (ifp->if_mtu > ETHERMTU)
|
|
adapter->rx_mbuf_sz = MJUMPAGESIZE;
|
|
else
|
|
adapter->rx_mbuf_sz = MCLBYTES;
|
|
|
|
/* Prepare receive descriptors and buffers */
|
|
if (ixgbe_setup_receive_structures(adapter)) {
|
|
device_printf(dev,"Could not setup receive structures\n");
|
|
ixgbe_stop(adapter);
|
|
return;
|
|
}
|
|
|
|
/* Configure RX settings */
|
|
ixgbe_initialize_receive_units(adapter);
|
|
|
|
/* Configure Interrupt Moderation */
|
|
ixgbe_init_moderation(adapter);
|
|
|
|
gpie = IXGBE_READ_REG(&adapter->hw, IXGBE_GPIE);
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
gpie |= IXGBE_SDP1_GPIEN;
|
|
gpie |= IXGBE_SDP2_GPIEN;
|
|
}
|
|
|
|
/* Enable Fan Failure Interrupt */
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT)
|
|
gpie |= IXGBE_SDP1_GPIEN;
|
|
|
|
if (adapter->msix > 1) {
|
|
/* Enable Enhanced MSIX mode */
|
|
gpie |= IXGBE_GPIE_MSIX_MODE;
|
|
gpie |= IXGBE_GPIE_EIAME | IXGBE_GPIE_PBA_SUPPORT |
|
|
IXGBE_GPIE_OCD;
|
|
}
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_GPIE, gpie);
|
|
|
|
/* Set the various hardware offload abilities */
|
|
ifp->if_hwassist = 0;
|
|
if (ifp->if_capenable & IFCAP_TSO4)
|
|
ifp->if_hwassist |= CSUM_TSO;
|
|
if (ifp->if_capenable & IFCAP_TXCSUM)
|
|
ifp->if_hwassist = (CSUM_TCP | CSUM_UDP);
|
|
|
|
/* Set MTU size */
|
|
if (ifp->if_mtu > ETHERMTU) {
|
|
mhadd = IXGBE_READ_REG(&adapter->hw, IXGBE_MHADD);
|
|
mhadd &= ~IXGBE_MHADD_MFS_MASK;
|
|
mhadd |= adapter->max_frame_size << IXGBE_MHADD_MFS_SHIFT;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_MHADD, mhadd);
|
|
}
|
|
|
|
/* Now enable all the queues */
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
txdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_TXDCTL(i));
|
|
txdctl |= IXGBE_TXDCTL_ENABLE;
|
|
/* Set WTHRESH to 8, burst writeback */
|
|
txdctl |= (8 << 16);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_TXDCTL(i), txdctl);
|
|
}
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
rxdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(i));
|
|
/* PTHRESH set to 32 */
|
|
rxdctl |= 0x0020;
|
|
rxdctl |= IXGBE_RXDCTL_ENABLE;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(i), rxdctl);
|
|
for (k = 0; k < 10; k++) {
|
|
if (IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)) &
|
|
IXGBE_RXDCTL_ENABLE)
|
|
break;
|
|
else
|
|
msec_delay(1);
|
|
}
|
|
wmb();
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDT(i), adapter->num_rx_desc - 1);
|
|
}
|
|
|
|
/* Set up VLAN offloads and filter */
|
|
ixgbe_setup_vlan_hw_support(adapter);
|
|
|
|
/* Enable Receive engine */
|
|
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB)
|
|
rxctrl |= IXGBE_RXCTRL_DMBYPS;
|
|
rxctrl |= IXGBE_RXCTRL_RXEN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
|
|
|
|
callout_reset(&adapter->timer, hz, ixgbe_local_timer, adapter);
|
|
|
|
/* Set up MSI/X routing */
|
|
if (ixgbe_enable_msix)
|
|
ixgbe_configure_ivars(adapter);
|
|
else { /* Simple settings for Legacy/MSI */
|
|
ixgbe_set_ivar(adapter, 0, 0, 0);
|
|
ixgbe_set_ivar(adapter, 0, 0, 1);
|
|
}
|
|
|
|
ixgbe_enable_intr(adapter);
|
|
|
|
/*
|
|
** Check on any SFP devices that
|
|
** need to be kick-started
|
|
*/
|
|
err = hw->phy.ops.identify(hw);
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,
|
|
"Unsupported SFP+ module type was detected.\n");
|
|
ixgbe_detach(dev);
|
|
return;
|
|
}
|
|
if (ixgbe_is_sfp(hw)) {
|
|
if (hw->phy.multispeed_fiber) {
|
|
hw->mac.ops.setup_sfp(hw);
|
|
taskqueue_enqueue(adapter->tq, &adapter->msf_task);
|
|
} else
|
|
taskqueue_enqueue(adapter->tq, &adapter->mod_task);
|
|
} else
|
|
taskqueue_enqueue(adapter->tq, &adapter->link_task);
|
|
|
|
/* Now inform the stack we're ready */
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixgbe_init(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_init_locked(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
**
|
|
** MSIX Interrupt Handlers and Tasklets
|
|
**
|
|
*/
|
|
|
|
static inline void
|
|
ixgbe_enable_queue(struct adapter *adapter, u32 vector)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 queue = (u64)(1 << vector);
|
|
u32 mask;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
|
|
} else {
|
|
mask = (queue & 0xFFFFFFFF);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask);
|
|
mask = (queue >> 32);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask);
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
ixgbe_disable_queue(struct adapter *adapter, u32 vector)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 queue = (u64)(1 << vector);
|
|
u32 mask;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask);
|
|
} else {
|
|
mask = (queue & 0xFFFFFFFF);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask);
|
|
mask = (queue >> 32);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask);
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
ixgbe_rearm_rx_queues(struct adapter *adapter, u64 queues)
|
|
{
|
|
u32 mask;
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queues);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
|
|
} else {
|
|
mask = (queues & 0xFFFFFFFF);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask);
|
|
mask = (queues >> 32);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixgbe_handle_rx(void *context, int pending)
|
|
{
|
|
struct rx_ring *rxr = context;
|
|
struct adapter *adapter = rxr->adapter;
|
|
u32 loop = MAX_LOOP;
|
|
bool more;
|
|
|
|
do {
|
|
more = ixgbe_rxeof(rxr, -1);
|
|
} while (loop-- && more);
|
|
/* Reenable this interrupt */
|
|
ixgbe_enable_queue(adapter, rxr->msix);
|
|
}
|
|
|
|
static void
|
|
ixgbe_handle_tx(void *context, int pending)
|
|
{
|
|
struct tx_ring *txr = context;
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
u32 loop = MAX_LOOP;
|
|
bool more;
|
|
|
|
IXGBE_TX_LOCK(txr);
|
|
do {
|
|
more = ixgbe_txeof(txr);
|
|
} while (loop-- && more);
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
#if __FreeBSD_version >= 800000
|
|
if (!drbr_empty(ifp, txr->br))
|
|
ixgbe_mq_start_locked(ifp, txr, NULL);
|
|
#else
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
ixgbe_start_locked(txr, ifp);
|
|
#endif
|
|
}
|
|
|
|
IXGBE_TX_UNLOCK(txr);
|
|
/* Reenable this interrupt */
|
|
ixgbe_enable_queue(adapter, txr->msix);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Legacy Interrupt Service routine
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_legacy_irq(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
bool more;
|
|
u32 reg_eicr, loop = MAX_LOOP;
|
|
|
|
|
|
reg_eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
|
|
|
|
if (reg_eicr == 0) {
|
|
ixgbe_enable_intr(adapter);
|
|
return;
|
|
}
|
|
|
|
if (ixgbe_rxeof(rxr, adapter->rx_process_limit))
|
|
taskqueue_enqueue(rxr->tq, &rxr->rx_task);
|
|
|
|
IXGBE_TX_LOCK(txr);
|
|
++txr->tx_irq;
|
|
do {
|
|
more = ixgbe_txeof(txr);
|
|
} while (loop-- && more);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
|
|
if (more)
|
|
taskqueue_enqueue(txr->tq, &txr->tx_task);
|
|
|
|
/* Check for fan failure */
|
|
if ((hw->phy.media_type == ixgbe_media_type_copper) &&
|
|
(reg_eicr & IXGBE_EICR_GPI_SDP1)) {
|
|
device_printf(adapter->dev, "\nCRITICAL: FAN FAILURE!! "
|
|
"REPLACE IMMEDIATELY!!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EICR_GPI_SDP1);
|
|
}
|
|
|
|
/* Link status change */
|
|
if (reg_eicr & IXGBE_EICR_LSC) {
|
|
ixgbe_check_link(&adapter->hw,
|
|
&adapter->link_speed, &adapter->link_up, 0);
|
|
ixgbe_update_link_status(adapter);
|
|
}
|
|
|
|
/* Update interrupt rate */
|
|
if (ixgbe_enable_aim == TRUE)
|
|
ixgbe_update_aim(rxr);
|
|
|
|
ixgbe_enable_intr(adapter);
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* MSI TX Interrupt Service routine
|
|
*
|
|
**********************************************************************/
|
|
void
|
|
ixgbe_msix_tx(void *arg)
|
|
{
|
|
struct tx_ring *txr = arg;
|
|
struct adapter *adapter = txr->adapter;
|
|
bool more;
|
|
|
|
ixgbe_disable_queue(adapter, txr->msix);
|
|
|
|
IXGBE_TX_LOCK(txr);
|
|
++txr->tx_irq;
|
|
more = ixgbe_txeof(txr);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
if (more)
|
|
taskqueue_enqueue(txr->tq, &txr->tx_task);
|
|
else /* Reenable this interrupt */
|
|
ixgbe_enable_queue(adapter, txr->msix);
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* MSIX RX Interrupt Service routine
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_msix_rx(void *arg)
|
|
{
|
|
struct rx_ring *rxr = arg;
|
|
struct adapter *adapter = rxr->adapter;
|
|
bool more;
|
|
|
|
ixgbe_disable_queue(adapter, rxr->msix);
|
|
|
|
++rxr->rx_irq;
|
|
more = ixgbe_rxeof(rxr, adapter->rx_process_limit);
|
|
|
|
/* Update interrupt rate */
|
|
if (ixgbe_enable_aim == TRUE)
|
|
ixgbe_update_aim(rxr);
|
|
|
|
if (more)
|
|
taskqueue_enqueue(rxr->tq, &rxr->rx_task);
|
|
else
|
|
ixgbe_enable_queue(adapter, rxr->msix);
|
|
return;
|
|
}
|
|
|
|
|
|
static void
|
|
ixgbe_msix_link(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 reg_eicr;
|
|
|
|
++adapter->link_irq;
|
|
|
|
/* First get the cause */
|
|
reg_eicr = IXGBE_READ_REG(hw, IXGBE_EICS);
|
|
/* Clear interrupt with write */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, reg_eicr);
|
|
|
|
/* Link status change */
|
|
if (reg_eicr & IXGBE_EICR_LSC)
|
|
taskqueue_enqueue(adapter->tq, &adapter->link_task);
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
if (reg_eicr & IXGBE_EICR_ECC) {
|
|
device_printf(adapter->dev, "\nCRITICAL: ECC ERROR!! "
|
|
"Please Reboot!!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC);
|
|
} else if (reg_eicr & IXGBE_EICR_GPI_SDP1) {
|
|
/* Clear the interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
|
|
taskqueue_enqueue(adapter->tq, &adapter->msf_task);
|
|
} else if (reg_eicr & IXGBE_EICR_GPI_SDP2) {
|
|
/* Clear the interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2);
|
|
taskqueue_enqueue(adapter->tq, &adapter->mod_task);
|
|
}
|
|
}
|
|
|
|
/* Check for fan failure */
|
|
if ((hw->device_id == IXGBE_DEV_ID_82598AT) &&
|
|
(reg_eicr & IXGBE_EICR_GPI_SDP1)) {
|
|
device_printf(adapter->dev, "\nCRITICAL: FAN FAILURE!! "
|
|
"REPLACE IMMEDIATELY!!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
|
|
}
|
|
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Routine to do adjust the RX EITR value based on traffic,
|
|
** its a simple three state model, but seems to help.
|
|
**
|
|
** Note that the three EITR values are tuneable using
|
|
** sysctl in real time. The feature can be effectively
|
|
** nullified by setting them equal.
|
|
*/
|
|
#define BULK_THRESHOLD 10000
|
|
#define AVE_THRESHOLD 1600
|
|
|
|
static void
|
|
ixgbe_update_aim(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter = rxr->adapter;
|
|
u32 olditr, newitr;
|
|
|
|
/* Update interrupt moderation based on traffic */
|
|
olditr = rxr->eitr_setting;
|
|
newitr = olditr;
|
|
|
|
/* Idle, don't change setting */
|
|
if (rxr->bytes == 0)
|
|
return;
|
|
|
|
if (olditr == ixgbe_low_latency) {
|
|
if (rxr->bytes > AVE_THRESHOLD)
|
|
newitr = ixgbe_ave_latency;
|
|
} else if (olditr == ixgbe_ave_latency) {
|
|
if (rxr->bytes < AVE_THRESHOLD)
|
|
newitr = ixgbe_low_latency;
|
|
else if (rxr->bytes > BULK_THRESHOLD)
|
|
newitr = ixgbe_bulk_latency;
|
|
} else if (olditr == ixgbe_bulk_latency) {
|
|
if (rxr->bytes < BULK_THRESHOLD)
|
|
newitr = ixgbe_ave_latency;
|
|
}
|
|
|
|
if (olditr != newitr) {
|
|
/* Change interrupt rate */
|
|
rxr->eitr_setting = newitr;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(rxr->me),
|
|
newitr | (newitr << 16));
|
|
}
|
|
|
|
rxr->bytes = 0;
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixgbe_init_moderation(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
|
|
/* Single interrupt - MSI or Legacy? */
|
|
if (adapter->msix < 2) {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(0), 100);
|
|
return;
|
|
}
|
|
|
|
/* TX irq moderation rate is fixed */
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
IXGBE_WRITE_REG(&adapter->hw,
|
|
IXGBE_EITR(txr->msix), ixgbe_ave_latency);
|
|
txr->watchdog_timer = FALSE;
|
|
}
|
|
|
|
/* RX moderation will be adapted over time, set default */
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
IXGBE_WRITE_REG(&adapter->hw,
|
|
IXGBE_EITR(rxr->msix), ixgbe_low_latency);
|
|
}
|
|
|
|
/* Set Link moderation */
|
|
IXGBE_WRITE_REG(&adapter->hw,
|
|
IXGBE_EITR(adapter->linkvec), IXGBE_LINK_ITR);
|
|
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Media Ioctl callback
|
|
*
|
|
* This routine is called whenever the user queries the status of
|
|
* the interface using ifconfig.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_media_status(struct ifnet * ifp, struct ifmediareq * ifmr)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
|
|
INIT_DEBUGOUT("ixgbe_media_status: begin");
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_update_link_status(adapter);
|
|
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
if (!adapter->link_active) {
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
return;
|
|
}
|
|
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_T | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= adapter->optics | IFM_FDX;
|
|
break;
|
|
}
|
|
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Media Ioctl callback
|
|
*
|
|
* This routine is called when the user changes speed/duplex using
|
|
* media/mediopt option with ifconfig.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_media_change(struct ifnet * ifp)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct ifmedia *ifm = &adapter->media;
|
|
|
|
INIT_DEBUGOUT("ixgbe_media_change: begin");
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return (EINVAL);
|
|
|
|
switch (IFM_SUBTYPE(ifm->ifm_media)) {
|
|
case IFM_AUTO:
|
|
adapter->hw.mac.autoneg = TRUE;
|
|
adapter->hw.phy.autoneg_advertised =
|
|
IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_10GB_FULL;
|
|
break;
|
|
default:
|
|
device_printf(adapter->dev, "Only auto media type\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* This routine maps the mbufs to tx descriptors.
|
|
* WARNING: while this code is using an MQ style infrastructure,
|
|
* it would NOT work as is with more than 1 queue.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
**********************************************************************/
|
|
|
|
static int
|
|
ixgbe_xmit(struct tx_ring *txr, struct mbuf **m_headp)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
u32 olinfo_status = 0, cmd_type_len;
|
|
u32 paylen = 0;
|
|
int i, j, error, nsegs;
|
|
int first, last = 0;
|
|
struct mbuf *m_head;
|
|
bus_dma_segment_t segs[ixgbe_num_segs];
|
|
bus_dmamap_t map;
|
|
struct ixgbe_tx_buf *txbuf, *txbuf_mapped;
|
|
union ixgbe_adv_tx_desc *txd = NULL;
|
|
|
|
m_head = *m_headp;
|
|
|
|
/* Basic descriptor defines */
|
|
cmd_type_len = (IXGBE_ADVTXD_DTYP_DATA |
|
|
IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT);
|
|
|
|
if (m_head->m_flags & M_VLANTAG)
|
|
cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE;
|
|
|
|
/* Do a clean if descriptors are low */
|
|
if (txr->tx_avail <= IXGBE_TX_CLEANUP_THRESHOLD) {
|
|
ixgbe_txeof(txr);
|
|
/* Now do we at least have a minimal? */
|
|
if (txr->tx_avail <= IXGBE_TX_OP_THRESHOLD)
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
/*
|
|
* Important to capture the first descriptor
|
|
* used because it will contain the index of
|
|
* the one we tell the hardware to report back
|
|
*/
|
|
first = txr->next_avail_tx_desc;
|
|
txbuf = &txr->tx_buffers[first];
|
|
txbuf_mapped = txbuf;
|
|
map = txbuf->map;
|
|
|
|
/*
|
|
* Map the packet for DMA.
|
|
*/
|
|
error = bus_dmamap_load_mbuf_sg(txr->txtag, map,
|
|
*m_headp, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
if (error == EFBIG) {
|
|
struct mbuf *m;
|
|
|
|
m = m_defrag(*m_headp, M_DONTWAIT);
|
|
if (m == NULL) {
|
|
adapter->mbuf_defrag_failed++;
|
|
m_freem(*m_headp);
|
|
*m_headp = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_headp = m;
|
|
|
|
/* Try it again */
|
|
error = bus_dmamap_load_mbuf_sg(txr->txtag, map,
|
|
*m_headp, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
if (error == ENOMEM) {
|
|
adapter->no_tx_dma_setup++;
|
|
return (error);
|
|
} else if (error != 0) {
|
|
adapter->no_tx_dma_setup++;
|
|
m_freem(*m_headp);
|
|
*m_headp = NULL;
|
|
return (error);
|
|
}
|
|
} else if (error == ENOMEM) {
|
|
adapter->no_tx_dma_setup++;
|
|
return (error);
|
|
} else if (error != 0) {
|
|
adapter->no_tx_dma_setup++;
|
|
m_freem(*m_headp);
|
|
*m_headp = NULL;
|
|
return (error);
|
|
}
|
|
|
|
/* Make certain there are enough descriptors */
|
|
if (nsegs > txr->tx_avail - 2) {
|
|
txr->no_tx_desc_avail++;
|
|
error = ENOBUFS;
|
|
goto xmit_fail;
|
|
}
|
|
m_head = *m_headp;
|
|
|
|
/*
|
|
** Set up the appropriate offload context
|
|
** this becomes the first descriptor of
|
|
** a packet.
|
|
*/
|
|
if (m_head->m_pkthdr.csum_flags & CSUM_TSO) {
|
|
if (ixgbe_tso_setup(txr, m_head, &paylen)) {
|
|
cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
|
|
olinfo_status |= IXGBE_TXD_POPTS_IXSM << 8;
|
|
olinfo_status |= IXGBE_TXD_POPTS_TXSM << 8;
|
|
olinfo_status |= paylen << IXGBE_ADVTXD_PAYLEN_SHIFT;
|
|
++adapter->tso_tx;
|
|
} else
|
|
return (ENXIO);
|
|
} else if (ixgbe_tx_ctx_setup(txr, m_head))
|
|
olinfo_status |= IXGBE_TXD_POPTS_TXSM << 8;
|
|
|
|
#ifdef IXGBE_IEEE1588
|
|
/* This is changing soon to an mtag detection */
|
|
if (we detect this mbuf has a TSTAMP mtag)
|
|
cmd_type_len |= IXGBE_ADVTXD_MAC_TSTAMP;
|
|
#endif
|
|
|
|
/* Record payload length */
|
|
if (paylen == 0)
|
|
olinfo_status |= m_head->m_pkthdr.len <<
|
|
IXGBE_ADVTXD_PAYLEN_SHIFT;
|
|
|
|
i = txr->next_avail_tx_desc;
|
|
for (j = 0; j < nsegs; j++) {
|
|
bus_size_t seglen;
|
|
bus_addr_t segaddr;
|
|
|
|
txbuf = &txr->tx_buffers[i];
|
|
txd = &txr->tx_base[i];
|
|
seglen = segs[j].ds_len;
|
|
segaddr = htole64(segs[j].ds_addr);
|
|
|
|
txd->read.buffer_addr = segaddr;
|
|
txd->read.cmd_type_len = htole32(txr->txd_cmd |
|
|
cmd_type_len |seglen);
|
|
txd->read.olinfo_status = htole32(olinfo_status);
|
|
last = i; /* Next descriptor that will get completed */
|
|
|
|
if (++i == adapter->num_tx_desc)
|
|
i = 0;
|
|
|
|
txbuf->m_head = NULL;
|
|
txbuf->eop_index = -1;
|
|
}
|
|
|
|
txd->read.cmd_type_len |=
|
|
htole32(IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS);
|
|
txr->tx_avail -= nsegs;
|
|
txr->next_avail_tx_desc = i;
|
|
|
|
txbuf->m_head = m_head;
|
|
txbuf->map = map;
|
|
bus_dmamap_sync(txr->txtag, map, BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Set the index of the descriptor that will be marked done */
|
|
txbuf = &txr->tx_buffers[first];
|
|
txbuf->eop_index = last;
|
|
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
/*
|
|
* Advance the Transmit Descriptor Tail (Tdt), this tells the
|
|
* hardware that this frame is available to transmit.
|
|
*/
|
|
++txr->total_packets;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDT(txr->me), i);
|
|
return (0);
|
|
|
|
xmit_fail:
|
|
bus_dmamap_unload(txr->txtag, txbuf->map);
|
|
return (error);
|
|
|
|
}
|
|
|
|
static void
|
|
ixgbe_set_promisc(struct adapter *adapter)
|
|
{
|
|
|
|
u_int32_t reg_rctl;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
|
|
reg_rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
|
|
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
reg_rctl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
|
|
} else if (ifp->if_flags & IFF_ALLMULTI) {
|
|
reg_rctl |= IXGBE_FCTRL_MPE;
|
|
reg_rctl &= ~IXGBE_FCTRL_UPE;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixgbe_disable_promisc(struct adapter * adapter)
|
|
{
|
|
u_int32_t reg_rctl;
|
|
|
|
reg_rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
|
|
|
|
reg_rctl &= (~IXGBE_FCTRL_UPE);
|
|
reg_rctl &= (~IXGBE_FCTRL_MPE);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* Multicast Update
|
|
*
|
|
* This routine is called whenever multicast address list is updated.
|
|
*
|
|
**********************************************************************/
|
|
#define IXGBE_RAR_ENTRIES 16
|
|
|
|
static void
|
|
ixgbe_set_multi(struct adapter *adapter)
|
|
{
|
|
u32 fctrl;
|
|
u8 mta[MAX_NUM_MULTICAST_ADDRESSES * IXGBE_ETH_LENGTH_OF_ADDRESS];
|
|
u8 *update_ptr;
|
|
struct ifmultiaddr *ifma;
|
|
int mcnt = 0;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
|
|
IOCTL_DEBUGOUT("ixgbe_set_multi: begin");
|
|
|
|
fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
|
|
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
else if (ifp->if_flags & IFF_ALLMULTI) {
|
|
fctrl |= IXGBE_FCTRL_MPE;
|
|
fctrl &= ~IXGBE_FCTRL_UPE;
|
|
} else
|
|
fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl);
|
|
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_LOCK(ifp);
|
|
#else
|
|
if_maddr_rlock(ifp);
|
|
#endif
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
bcopy(LLADDR((struct sockaddr_dl *) ifma->ifma_addr),
|
|
&mta[mcnt * IXGBE_ETH_LENGTH_OF_ADDRESS],
|
|
IXGBE_ETH_LENGTH_OF_ADDRESS);
|
|
mcnt++;
|
|
}
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_UNLOCK(ifp);
|
|
#else
|
|
if_maddr_runlock(ifp);
|
|
#endif
|
|
|
|
update_ptr = mta;
|
|
ixgbe_update_mc_addr_list(&adapter->hw,
|
|
update_ptr, mcnt, ixgbe_mc_array_itr);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* This is an iterator function now needed by the multicast
|
|
* shared code. It simply feeds the shared code routine the
|
|
* addresses in the array of ixgbe_set_multi() one by one.
|
|
*/
|
|
static u8 *
|
|
ixgbe_mc_array_itr(struct ixgbe_hw *hw, u8 **update_ptr, u32 *vmdq)
|
|
{
|
|
u8 *addr = *update_ptr;
|
|
u8 *newptr;
|
|
*vmdq = 0;
|
|
|
|
newptr = addr + IXGBE_ETH_LENGTH_OF_ADDRESS;
|
|
*update_ptr = newptr;
|
|
return addr;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* Timer routine
|
|
*
|
|
* This routine checks for link status,updates statistics,
|
|
* and runs the watchdog timer.
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_local_timer(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
|
|
/* Check for pluggable optics */
|
|
if (adapter->sfp_probe)
|
|
if (!ixgbe_sfp_probe(adapter))
|
|
goto out; /* Nothing to do */
|
|
|
|
ixgbe_update_link_status(adapter);
|
|
ixgbe_update_stats_counters(adapter);
|
|
if (ixgbe_display_debug_stats && ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
ixgbe_print_hw_stats(adapter);
|
|
}
|
|
/*
|
|
* Each tick we check the watchdog
|
|
* to protect against hardware hangs.
|
|
*/
|
|
ixgbe_watchdog(adapter);
|
|
|
|
out:
|
|
/* Trigger an RX interrupt on all queues */
|
|
ixgbe_rearm_rx_queues(adapter, adapter->rx_mask);
|
|
|
|
callout_reset(&adapter->timer, hz, ixgbe_local_timer, adapter);
|
|
}
|
|
|
|
/*
|
|
** Note: this routine updates the OS on the link state
|
|
** the real check of the hardware only happens with
|
|
** a link interrupt.
|
|
*/
|
|
static void
|
|
ixgbe_update_link_status(struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp = adapter->ifp;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
device_t dev = adapter->dev;
|
|
|
|
|
|
if (adapter->link_up){
|
|
if (adapter->link_active == FALSE) {
|
|
if (bootverbose)
|
|
device_printf(dev,"Link is up %d Gbps %s \n",
|
|
((adapter->link_speed == 128)? 10:1),
|
|
"Full Duplex");
|
|
adapter->link_active = TRUE;
|
|
if_link_state_change(ifp, LINK_STATE_UP);
|
|
}
|
|
} else { /* Link down */
|
|
if (adapter->link_active == TRUE) {
|
|
if (bootverbose)
|
|
device_printf(dev,"Link is Down\n");
|
|
if_link_state_change(ifp, LINK_STATE_DOWN);
|
|
adapter->link_active = FALSE;
|
|
for (int i = 0; i < adapter->num_queues;
|
|
i++, txr++)
|
|
txr->watchdog_timer = FALSE;
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* This routine disables all traffic on the adapter by issuing a
|
|
* global reset on the MAC and deallocates TX/RX buffers.
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_stop(void *arg)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct adapter *adapter = arg;
|
|
ifp = adapter->ifp;
|
|
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
|
|
INIT_DEBUGOUT("ixgbe_stop: begin\n");
|
|
ixgbe_disable_intr(adapter);
|
|
|
|
/* Tell the stack that the interface is no longer active */
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
|
|
ixgbe_reset_hw(&adapter->hw);
|
|
adapter->hw.adapter_stopped = FALSE;
|
|
ixgbe_stop_adapter(&adapter->hw);
|
|
callout_stop(&adapter->timer);
|
|
|
|
/* reprogram the RAR[0] in case user changed it. */
|
|
ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Determine hardware revision.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_identify_hardware(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
|
|
/* Save off the information about this board */
|
|
adapter->hw.vendor_id = pci_get_vendor(dev);
|
|
adapter->hw.device_id = pci_get_device(dev);
|
|
adapter->hw.revision_id = pci_read_config(dev, PCIR_REVID, 1);
|
|
adapter->hw.subsystem_vendor_id =
|
|
pci_read_config(dev, PCIR_SUBVEND_0, 2);
|
|
adapter->hw.subsystem_device_id =
|
|
pci_read_config(dev, PCIR_SUBDEV_0, 2);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup the Legacy or MSI Interrupt handler
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_legacy(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
int error, rid = 0;
|
|
|
|
/* MSI RID at 1 */
|
|
if (adapter->msix == 1)
|
|
rid = 1;
|
|
|
|
/* We allocate a single interrupt resource */
|
|
adapter->res = bus_alloc_resource_any(dev,
|
|
SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE);
|
|
if (adapter->res == NULL) {
|
|
device_printf(dev, "Unable to allocate bus resource: "
|
|
"interrupt\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Try allocating a fast interrupt and the associated deferred
|
|
* processing contexts.
|
|
*/
|
|
TASK_INIT(&txr->tx_task, 0, ixgbe_handle_tx, txr);
|
|
TASK_INIT(&rxr->rx_task, 0, ixgbe_handle_rx, rxr);
|
|
txr->tq = taskqueue_create_fast("ixgbe_txq", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &txr->tq);
|
|
rxr->tq = taskqueue_create_fast("ixgbe_rxq", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &rxr->tq);
|
|
taskqueue_start_threads(&txr->tq, 1, PI_NET, "%s txq",
|
|
device_get_nameunit(adapter->dev));
|
|
taskqueue_start_threads(&rxr->tq, 1, PI_NET, "%s rxq",
|
|
device_get_nameunit(adapter->dev));
|
|
|
|
/* Tasklets for Link, SFP and Multispeed Fiber */
|
|
TASK_INIT(&adapter->link_task, 0, ixgbe_handle_link, adapter);
|
|
TASK_INIT(&adapter->mod_task, 0, ixgbe_handle_mod, adapter);
|
|
TASK_INIT(&adapter->msf_task, 0, ixgbe_handle_msf, adapter);
|
|
adapter->tq = taskqueue_create_fast("ixgbe_link", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &adapter->tq);
|
|
taskqueue_start_threads(&adapter->tq, 1, PI_NET, "%s linkq",
|
|
device_get_nameunit(adapter->dev));
|
|
|
|
if ((error = bus_setup_intr(dev, adapter->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL, ixgbe_legacy_irq,
|
|
adapter, &adapter->tag)) != 0) {
|
|
device_printf(dev, "Failed to register fast interrupt "
|
|
"handler: %d\n", error);
|
|
taskqueue_free(txr->tq);
|
|
taskqueue_free(rxr->tq);
|
|
txr->tq = NULL;
|
|
rxr->tq = NULL;
|
|
return (error);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup MSIX Interrupt resources and handlers
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_msix(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
int error, rid, vector = 0;
|
|
|
|
/* TX setup: the code is here for multi tx,
|
|
there are other parts of the driver not ready for it */
|
|
for (int i = 0; i < adapter->num_queues; i++, vector++, txr++) {
|
|
rid = vector + 1;
|
|
txr->res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
if (!txr->res) {
|
|
device_printf(dev,"Unable to allocate"
|
|
" bus resource: tx interrupt [%d]\n", vector);
|
|
return (ENXIO);
|
|
}
|
|
/* Set the handler function */
|
|
error = bus_setup_intr(dev, txr->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL,
|
|
ixgbe_msix_tx, txr, &txr->tag);
|
|
if (error) {
|
|
txr->res = NULL;
|
|
device_printf(dev, "Failed to register TX handler");
|
|
return (error);
|
|
}
|
|
txr->msix = vector;
|
|
/*
|
|
** Bind the msix vector, and thus the
|
|
** ring to the corresponding cpu.
|
|
*/
|
|
if (adapter->num_queues > 1)
|
|
bus_bind_intr(dev, txr->res, i);
|
|
|
|
TASK_INIT(&txr->tx_task, 0, ixgbe_handle_tx, txr);
|
|
txr->tq = taskqueue_create_fast("ixgbe_txq", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &txr->tq);
|
|
taskqueue_start_threads(&txr->tq, 1, PI_NET, "%s txq",
|
|
device_get_nameunit(adapter->dev));
|
|
}
|
|
|
|
/* RX setup */
|
|
for (int i = 0; i < adapter->num_queues; i++, vector++, rxr++) {
|
|
rid = vector + 1;
|
|
rxr->res = bus_alloc_resource_any(dev,
|
|
SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE);
|
|
if (!rxr->res) {
|
|
device_printf(dev,"Unable to allocate"
|
|
" bus resource: rx interrupt [%d],"
|
|
"rid = %d\n", i, rid);
|
|
return (ENXIO);
|
|
}
|
|
/* Set the handler function */
|
|
error = bus_setup_intr(dev, rxr->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL,
|
|
ixgbe_msix_rx, rxr, &rxr->tag);
|
|
if (error) {
|
|
rxr->res = NULL;
|
|
device_printf(dev, "Failed to register RX handler");
|
|
return (error);
|
|
}
|
|
rxr->msix = vector;
|
|
/* used in local timer */
|
|
adapter->rx_mask |= (u64)(1 << vector);
|
|
/*
|
|
** Bind the msix vector, and thus the
|
|
** ring to the corresponding cpu.
|
|
*/
|
|
if (adapter->num_queues > 1)
|
|
bus_bind_intr(dev, rxr->res, i);
|
|
|
|
TASK_INIT(&rxr->rx_task, 0, ixgbe_handle_rx, rxr);
|
|
rxr->tq = taskqueue_create_fast("ixgbe_rxq", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &rxr->tq);
|
|
taskqueue_start_threads(&rxr->tq, 1, PI_NET, "%s rxq",
|
|
device_get_nameunit(adapter->dev));
|
|
}
|
|
|
|
/* Now for Link changes */
|
|
rid = vector + 1;
|
|
adapter->res = bus_alloc_resource_any(dev,
|
|
SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE);
|
|
if (!adapter->res) {
|
|
device_printf(dev,"Unable to allocate"
|
|
" bus resource: Link interrupt [%d]\n", rid);
|
|
return (ENXIO);
|
|
}
|
|
/* Set the link handler function */
|
|
error = bus_setup_intr(dev, adapter->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL,
|
|
ixgbe_msix_link, adapter, &adapter->tag);
|
|
if (error) {
|
|
adapter->res = NULL;
|
|
device_printf(dev, "Failed to register LINK handler");
|
|
return (error);
|
|
}
|
|
adapter->linkvec = vector;
|
|
/* Tasklets for Link, SFP and Multispeed Fiber */
|
|
TASK_INIT(&adapter->link_task, 0, ixgbe_handle_link, adapter);
|
|
TASK_INIT(&adapter->mod_task, 0, ixgbe_handle_mod, adapter);
|
|
TASK_INIT(&adapter->msf_task, 0, ixgbe_handle_msf, adapter);
|
|
adapter->tq = taskqueue_create_fast("ixgbe_link", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &adapter->tq);
|
|
taskqueue_start_threads(&adapter->tq, 1, PI_NET, "%s linkq",
|
|
device_get_nameunit(adapter->dev));
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Setup Either MSI/X or MSI
|
|
*/
|
|
static int
|
|
ixgbe_setup_msix(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
int rid, want, queues, msgs;
|
|
|
|
/* Override by tuneable */
|
|
if (ixgbe_enable_msix == 0)
|
|
goto msi;
|
|
|
|
/* First try MSI/X */
|
|
rid = PCIR_BAR(MSIX_82598_BAR);
|
|
adapter->msix_mem = bus_alloc_resource_any(dev,
|
|
SYS_RES_MEMORY, &rid, RF_ACTIVE);
|
|
if (!adapter->msix_mem) {
|
|
rid += 4; /* 82599 maps in higher BAR */
|
|
adapter->msix_mem = bus_alloc_resource_any(dev,
|
|
SYS_RES_MEMORY, &rid, RF_ACTIVE);
|
|
}
|
|
if (!adapter->msix_mem) {
|
|
/* May not be enabled */
|
|
device_printf(adapter->dev,
|
|
"Unable to map MSIX table \n");
|
|
goto msi;
|
|
}
|
|
|
|
msgs = pci_msix_count(dev);
|
|
if (msgs == 0) { /* system has msix disabled */
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
rid, adapter->msix_mem);
|
|
adapter->msix_mem = NULL;
|
|
goto msi;
|
|
}
|
|
|
|
/* Figure out a reasonable auto config value */
|
|
queues = (mp_ncpus > ((msgs-1)/2)) ? (msgs-1)/2 : mp_ncpus;
|
|
|
|
if (ixgbe_num_queues == 0)
|
|
ixgbe_num_queues = queues;
|
|
/*
|
|
** Want two vectors (RX/TX) per queue
|
|
** plus an additional for Link.
|
|
*/
|
|
want = (ixgbe_num_queues * 2) + 1;
|
|
if (msgs >= want)
|
|
msgs = want;
|
|
else {
|
|
device_printf(adapter->dev,
|
|
"MSIX Configuration Problem, "
|
|
"%d vectors but %d queues wanted!\n",
|
|
msgs, want);
|
|
return (0); /* Will go to Legacy setup */
|
|
}
|
|
if ((msgs) && pci_alloc_msix(dev, &msgs) == 0) {
|
|
device_printf(adapter->dev,
|
|
"Using MSIX interrupts with %d vectors\n", msgs);
|
|
adapter->num_queues = ixgbe_num_queues;
|
|
return (msgs);
|
|
}
|
|
msi:
|
|
msgs = pci_msi_count(dev);
|
|
if (msgs == 1 && pci_alloc_msi(dev, &msgs) == 0)
|
|
device_printf(adapter->dev,"Using MSI interrupt\n");
|
|
return (msgs);
|
|
}
|
|
|
|
|
|
static int
|
|
ixgbe_allocate_pci_resources(struct adapter *adapter)
|
|
{
|
|
int rid;
|
|
device_t dev = adapter->dev;
|
|
|
|
rid = PCIR_BAR(0);
|
|
adapter->pci_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE);
|
|
|
|
if (!(adapter->pci_mem)) {
|
|
device_printf(dev,"Unable to allocate bus resource: memory\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
adapter->osdep.mem_bus_space_tag =
|
|
rman_get_bustag(adapter->pci_mem);
|
|
adapter->osdep.mem_bus_space_handle =
|
|
rman_get_bushandle(adapter->pci_mem);
|
|
adapter->hw.hw_addr = (u8 *) &adapter->osdep.mem_bus_space_handle;
|
|
|
|
/* Legacy defaults */
|
|
adapter->num_queues = 1;
|
|
adapter->hw.back = &adapter->osdep;
|
|
|
|
/*
|
|
** Now setup MSI or MSI/X, should
|
|
** return us the number of supported
|
|
** vectors. (Will be 1 for MSI)
|
|
*/
|
|
adapter->msix = ixgbe_setup_msix(adapter);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ixgbe_free_pci_resources(struct adapter * adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
device_t dev = adapter->dev;
|
|
int rid, memrid;
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB)
|
|
memrid = PCIR_BAR(MSIX_82598_BAR);
|
|
else
|
|
memrid = PCIR_BAR(MSIX_82599_BAR);
|
|
|
|
/*
|
|
** There is a slight possibility of a failure mode
|
|
** in attach that will result in entering this function
|
|
** before interrupt resources have been initialized, and
|
|
** in that case we do not want to execute the loops below
|
|
** We can detect this reliably by the state of the adapter
|
|
** res pointer.
|
|
*/
|
|
if (adapter->res == NULL)
|
|
goto mem;
|
|
|
|
/*
|
|
** Release all the interrupt resources:
|
|
** notice this is harmless for Legacy or
|
|
** MSI since pointers will always be NULL
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
rid = txr->msix + 1;
|
|
if (txr->tag != NULL) {
|
|
bus_teardown_intr(dev, txr->res, txr->tag);
|
|
txr->tag = NULL;
|
|
}
|
|
if (txr->res != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, txr->res);
|
|
}
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
rid = rxr->msix + 1;
|
|
if (rxr->tag != NULL) {
|
|
bus_teardown_intr(dev, rxr->res, rxr->tag);
|
|
rxr->tag = NULL;
|
|
}
|
|
if (rxr->res != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, rxr->res);
|
|
}
|
|
|
|
/* Clean the Legacy or Link interrupt last */
|
|
if (adapter->linkvec) /* we are doing MSIX */
|
|
rid = adapter->linkvec + 1;
|
|
else
|
|
(adapter->msix != 0) ? (rid = 1):(rid = 0);
|
|
|
|
if (adapter->tag != NULL) {
|
|
bus_teardown_intr(dev, adapter->res, adapter->tag);
|
|
adapter->tag = NULL;
|
|
}
|
|
if (adapter->res != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, adapter->res);
|
|
mem:
|
|
if (adapter->msix)
|
|
pci_release_msi(dev);
|
|
|
|
if (adapter->msix_mem != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
memrid, adapter->msix_mem);
|
|
|
|
if (adapter->pci_mem != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
PCIR_BAR(0), adapter->pci_mem);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize the hardware to a configuration as specified by the
|
|
* adapter structure. The controller is reset, the EEPROM is
|
|
* verified, the MAC address is set, then the shared initialization
|
|
* routines are called.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_hardware_init(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
u32 ret;
|
|
u16 csum;
|
|
|
|
csum = 0;
|
|
/* Issue a global reset */
|
|
adapter->hw.adapter_stopped = FALSE;
|
|
ixgbe_stop_adapter(&adapter->hw);
|
|
|
|
/* Make sure we have a good EEPROM before we read from it */
|
|
if (ixgbe_validate_eeprom_checksum(&adapter->hw, &csum) < 0) {
|
|
device_printf(dev,"The EEPROM Checksum Is Not Valid\n");
|
|
return (EIO);
|
|
}
|
|
|
|
/* Get Hardware Flow Control setting */
|
|
adapter->hw.fc.requested_mode = ixgbe_fc_full;
|
|
adapter->hw.fc.pause_time = IXGBE_FC_PAUSE;
|
|
adapter->hw.fc.low_water = IXGBE_FC_LO;
|
|
adapter->hw.fc.high_water = IXGBE_FC_HI;
|
|
adapter->hw.fc.send_xon = TRUE;
|
|
|
|
ret = ixgbe_init_hw(&adapter->hw);
|
|
if (ret == IXGBE_ERR_EEPROM_VERSION) {
|
|
device_printf(dev, "This device is a pre-production adapter/"
|
|
"LOM. Please be aware there may be issues associated "
|
|
"with your hardware.\n If you are experiencing problems "
|
|
"please contact your Intel or hardware representative "
|
|
"who provided you with this hardware.\n");
|
|
} else if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,"Unsupported SFP+ Module\n");
|
|
return (EIO);
|
|
} else if (ret != 0 ) {
|
|
device_printf(dev,"Hardware Initialization Failure\n");
|
|
return (EIO);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup networking device structure and register an interface.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_setup_interface(device_t dev, struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
INIT_DEBUGOUT("ixgbe_setup_interface: begin");
|
|
|
|
ifp = adapter->ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL)
|
|
panic("%s: can not if_alloc()\n", device_get_nameunit(dev));
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_baudrate = 1000000000;
|
|
ifp->if_init = ixgbe_init;
|
|
ifp->if_softc = adapter;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = ixgbe_ioctl;
|
|
ifp->if_start = ixgbe_start;
|
|
#if __FreeBSD_version >= 800000
|
|
ifp->if_transmit = ixgbe_mq_start;
|
|
ifp->if_qflush = ixgbe_qflush;
|
|
#endif
|
|
ifp->if_snd.ifq_maxlen = adapter->num_tx_desc - 2;
|
|
|
|
ether_ifattach(ifp, adapter->hw.mac.addr);
|
|
|
|
adapter->max_frame_size =
|
|
ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
|
|
|
|
/*
|
|
* Tell the upper layer(s) we support long frames.
|
|
*/
|
|
ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
|
|
|
|
ifp->if_capabilities |= IFCAP_HWCSUM | IFCAP_TSO4 | IFCAP_VLAN_HWCSUM;
|
|
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU;
|
|
ifp->if_capabilities |= IFCAP_JUMBO_MTU | IFCAP_LRO;
|
|
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT)
|
|
ixgbe_setup_link_speed(hw, (IXGBE_LINK_SPEED_10GB_FULL |
|
|
IXGBE_LINK_SPEED_1GB_FULL), TRUE, TRUE);
|
|
else
|
|
ixgbe_setup_link_speed(hw, IXGBE_LINK_SPEED_10GB_FULL,
|
|
TRUE, FALSE);
|
|
|
|
/*
|
|
* Specify the media types supported by this adapter and register
|
|
* callbacks to update media and link information
|
|
*/
|
|
ifmedia_init(&adapter->media, IFM_IMASK, ixgbe_media_change,
|
|
ixgbe_media_status);
|
|
ifmedia_add(&adapter->media, IFM_ETHER | adapter->optics |
|
|
IFM_FDX, 0, NULL);
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT) {
|
|
ifmedia_add(&adapter->media,
|
|
IFM_ETHER | IFM_1000_T | IFM_FDX, 0, NULL);
|
|
ifmedia_add(&adapter->media,
|
|
IFM_ETHER | IFM_1000_T, 0, NULL);
|
|
}
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_AUTO, 0, NULL);
|
|
ifmedia_set(&adapter->media, IFM_ETHER | IFM_AUTO);
|
|
|
|
return;
|
|
}
|
|
|
|
/********************************************************************
|
|
* Manage DMA'able memory.
|
|
*******************************************************************/
|
|
static void
|
|
ixgbe_dmamap_cb(void *arg, bus_dma_segment_t * segs, int nseg, int error)
|
|
{
|
|
if (error)
|
|
return;
|
|
*(bus_addr_t *) arg = segs->ds_addr;
|
|
return;
|
|
}
|
|
|
|
static int
|
|
ixgbe_dma_malloc(struct adapter *adapter, bus_size_t size,
|
|
struct ixgbe_dma_alloc *dma, int mapflags)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
int r;
|
|
|
|
r = bus_dma_tag_create(NULL, /* parent */
|
|
1, 0, /* alignment, bounds */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
size, /* maxsize */
|
|
1, /* nsegments */
|
|
size, /* maxsegsize */
|
|
BUS_DMA_ALLOCNOW, /* flags */
|
|
NULL, /* lockfunc */
|
|
NULL, /* lockfuncarg */
|
|
&dma->dma_tag);
|
|
if (r != 0) {
|
|
device_printf(dev,"ixgbe_dma_malloc: bus_dma_tag_create failed; "
|
|
"error %u\n", r);
|
|
goto fail_0;
|
|
}
|
|
r = bus_dmamem_alloc(dma->dma_tag, (void **)&dma->dma_vaddr,
|
|
BUS_DMA_NOWAIT, &dma->dma_map);
|
|
if (r != 0) {
|
|
device_printf(dev,"ixgbe_dma_malloc: bus_dmamem_alloc failed; "
|
|
"error %u\n", r);
|
|
goto fail_1;
|
|
}
|
|
r = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr,
|
|
size,
|
|
ixgbe_dmamap_cb,
|
|
&dma->dma_paddr,
|
|
mapflags | BUS_DMA_NOWAIT);
|
|
if (r != 0) {
|
|
device_printf(dev,"ixgbe_dma_malloc: bus_dmamap_load failed; "
|
|
"error %u\n", r);
|
|
goto fail_2;
|
|
}
|
|
dma->dma_size = size;
|
|
return (0);
|
|
fail_2:
|
|
bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
|
|
fail_1:
|
|
bus_dma_tag_destroy(dma->dma_tag);
|
|
fail_0:
|
|
dma->dma_map = NULL;
|
|
dma->dma_tag = NULL;
|
|
return (r);
|
|
}
|
|
|
|
static void
|
|
ixgbe_dma_free(struct adapter *adapter, struct ixgbe_dma_alloc *dma)
|
|
{
|
|
bus_dmamap_sync(dma->dma_tag, dma->dma_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(dma->dma_tag, dma->dma_map);
|
|
bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
|
|
bus_dma_tag_destroy(dma->dma_tag);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Allocate memory for the transmit and receive rings, and then
|
|
* the descriptors associated with each, called only once at attach.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_queues(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct tx_ring *txr;
|
|
struct rx_ring *rxr;
|
|
int rsize, tsize, error = IXGBE_SUCCESS;
|
|
int txconf = 0, rxconf = 0;
|
|
|
|
/* First allocate the TX ring struct memory */
|
|
if (!(adapter->tx_rings =
|
|
(struct tx_ring *) malloc(sizeof(struct tx_ring) *
|
|
adapter->num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate TX ring memory\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
txr = adapter->tx_rings;
|
|
|
|
/* Next allocate the RX */
|
|
if (!(adapter->rx_rings =
|
|
(struct rx_ring *) malloc(sizeof(struct rx_ring) *
|
|
adapter->num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate RX ring memory\n");
|
|
error = ENOMEM;
|
|
goto rx_fail;
|
|
}
|
|
rxr = adapter->rx_rings;
|
|
|
|
/* For the ring itself */
|
|
tsize = roundup2(adapter->num_tx_desc *
|
|
sizeof(union ixgbe_adv_tx_desc), 4096);
|
|
|
|
/*
|
|
* Now set up the TX queues, txconf is needed to handle the
|
|
* possibility that things fail midcourse and we need to
|
|
* undo memory gracefully
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, txconf++) {
|
|
/* Set up some basics */
|
|
txr = &adapter->tx_rings[i];
|
|
txr->adapter = adapter;
|
|
txr->me = i;
|
|
|
|
/* Initialize the TX side lock */
|
|
snprintf(txr->mtx_name, sizeof(txr->mtx_name), "%s:tx(%d)",
|
|
device_get_nameunit(dev), txr->me);
|
|
mtx_init(&txr->tx_mtx, txr->mtx_name, NULL, MTX_DEF);
|
|
|
|
if (ixgbe_dma_malloc(adapter, tsize,
|
|
&txr->txdma, BUS_DMA_NOWAIT)) {
|
|
device_printf(dev,
|
|
"Unable to allocate TX Descriptor memory\n");
|
|
error = ENOMEM;
|
|
goto err_tx_desc;
|
|
}
|
|
txr->tx_base = (union ixgbe_adv_tx_desc *)txr->txdma.dma_vaddr;
|
|
bzero((void *)txr->tx_base, tsize);
|
|
|
|
/* Now allocate transmit buffers for the ring */
|
|
if (ixgbe_allocate_transmit_buffers(txr)) {
|
|
device_printf(dev,
|
|
"Critical Failure setting up transmit buffers\n");
|
|
error = ENOMEM;
|
|
goto err_tx_desc;
|
|
}
|
|
#if __FreeBSD_version >= 800000
|
|
/* Allocate a buf ring */
|
|
txr->br = buf_ring_alloc(IXGBE_BR_SIZE, M_DEVBUF,
|
|
M_WAITOK, &txr->tx_mtx);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Next the RX queues...
|
|
*/
|
|
rsize = roundup2(adapter->num_rx_desc *
|
|
sizeof(union ixgbe_adv_rx_desc), 4096);
|
|
for (int i = 0; i < adapter->num_queues; i++, rxconf++) {
|
|
rxr = &adapter->rx_rings[i];
|
|
/* Set up some basics */
|
|
rxr->adapter = adapter;
|
|
rxr->me = i;
|
|
|
|
/* Initialize the RX side lock */
|
|
snprintf(rxr->mtx_name, sizeof(rxr->mtx_name), "%s:rx(%d)",
|
|
device_get_nameunit(dev), rxr->me);
|
|
mtx_init(&rxr->rx_mtx, rxr->mtx_name, NULL, MTX_DEF);
|
|
|
|
if (ixgbe_dma_malloc(adapter, rsize,
|
|
&rxr->rxdma, BUS_DMA_NOWAIT)) {
|
|
device_printf(dev,
|
|
"Unable to allocate RxDescriptor memory\n");
|
|
error = ENOMEM;
|
|
goto err_rx_desc;
|
|
}
|
|
rxr->rx_base = (union ixgbe_adv_rx_desc *)rxr->rxdma.dma_vaddr;
|
|
bzero((void *)rxr->rx_base, rsize);
|
|
|
|
/* Allocate receive buffers for the ring*/
|
|
if (ixgbe_allocate_receive_buffers(rxr)) {
|
|
device_printf(dev,
|
|
"Critical Failure setting up receive buffers\n");
|
|
error = ENOMEM;
|
|
goto err_rx_desc;
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
|
|
err_rx_desc:
|
|
for (rxr = adapter->rx_rings; rxconf > 0; rxr++, rxconf--)
|
|
ixgbe_dma_free(adapter, &rxr->rxdma);
|
|
err_tx_desc:
|
|
for (txr = adapter->tx_rings; txconf > 0; txr++, txconf--)
|
|
ixgbe_dma_free(adapter, &txr->txdma);
|
|
free(adapter->rx_rings, M_DEVBUF);
|
|
rx_fail:
|
|
free(adapter->tx_rings, M_DEVBUF);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Allocate memory for tx_buffer structures. The tx_buffer stores all
|
|
* the information needed to transmit a packet on the wire. This is
|
|
* called only once at attach, setup is done every reset.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_transmit_buffers(struct tx_ring *txr)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
device_t dev = adapter->dev;
|
|
struct ixgbe_tx_buf *txbuf;
|
|
int error, i;
|
|
|
|
/*
|
|
* Setup DMA descriptor areas.
|
|
*/
|
|
if ((error = bus_dma_tag_create(NULL, /* parent */
|
|
1, 0, /* alignment, bounds */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
IXGBE_TSO_SIZE, /* maxsize */
|
|
ixgbe_num_segs, /* nsegments */
|
|
PAGE_SIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, /* lockfunc */
|
|
NULL, /* lockfuncarg */
|
|
&txr->txtag))) {
|
|
device_printf(dev,"Unable to allocate TX DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
if (!(txr->tx_buffers =
|
|
(struct ixgbe_tx_buf *) malloc(sizeof(struct ixgbe_tx_buf) *
|
|
adapter->num_tx_desc, M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate tx_buffer memory\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
/* Create the descriptor buffer dma maps */
|
|
txbuf = txr->tx_buffers;
|
|
for (i = 0; i < adapter->num_tx_desc; i++, txbuf++) {
|
|
error = bus_dmamap_create(txr->txtag, 0, &txbuf->map);
|
|
if (error != 0) {
|
|
device_printf(dev, "Unable to create TX DMA map\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
fail:
|
|
/* We free all, it handles case where we are in the middle */
|
|
ixgbe_free_transmit_structures(adapter);
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize a transmit ring.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_setup_transmit_ring(struct tx_ring *txr)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixgbe_tx_buf *txbuf;
|
|
int i;
|
|
|
|
/* Clear the old ring contents */
|
|
bzero((void *)txr->tx_base,
|
|
(sizeof(union ixgbe_adv_tx_desc)) * adapter->num_tx_desc);
|
|
/* Reset indices */
|
|
txr->next_avail_tx_desc = 0;
|
|
txr->next_tx_to_clean = 0;
|
|
|
|
/* Free any existing tx buffers. */
|
|
txbuf = txr->tx_buffers;
|
|
for (i = 0; i < adapter->num_tx_desc; i++, txbuf++) {
|
|
if (txbuf->m_head != NULL) {
|
|
bus_dmamap_sync(txr->txtag, txbuf->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(txr->txtag, txbuf->map);
|
|
m_freem(txbuf->m_head);
|
|
txbuf->m_head = NULL;
|
|
}
|
|
/* Clear the EOP index */
|
|
txbuf->eop_index = -1;
|
|
}
|
|
|
|
/* Set number of descriptors available */
|
|
txr->tx_avail = adapter->num_tx_desc;
|
|
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize all transmit rings.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_setup_transmit_structures(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++)
|
|
ixgbe_setup_transmit_ring(txr);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Enable transmit unit.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_initialize_transmit_units(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
/* Setup the Base and Length of the Tx Descriptor Ring */
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
u64 tdba = txr->txdma.dma_paddr;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDBAL(i),
|
|
(tdba & 0x00000000ffffffffULL));
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDBAH(i), (tdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDLEN(i),
|
|
adapter->num_tx_desc * sizeof(struct ixgbe_legacy_tx_desc));
|
|
|
|
/* Setup the HW Tx Head and Tail descriptor pointers */
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDH(i), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDT(i), 0);
|
|
|
|
/* Setup Transmit Descriptor Cmd Settings */
|
|
txr->txd_cmd = IXGBE_TXD_CMD_IFCS;
|
|
|
|
txr->watchdog_timer = 0;
|
|
}
|
|
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
u32 dmatxctl;
|
|
dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
|
|
dmatxctl |= IXGBE_DMATXCTL_TE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free all transmit rings.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_free_transmit_structures(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
IXGBE_TX_LOCK(txr);
|
|
ixgbe_free_transmit_buffers(txr);
|
|
ixgbe_dma_free(adapter, &txr->txdma);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
IXGBE_TX_LOCK_DESTROY(txr);
|
|
}
|
|
free(adapter->tx_rings, M_DEVBUF);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free transmit ring related data structures.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_free_transmit_buffers(struct tx_ring *txr)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixgbe_tx_buf *tx_buffer;
|
|
int i;
|
|
|
|
INIT_DEBUGOUT("free_transmit_ring: begin");
|
|
|
|
if (txr->tx_buffers == NULL)
|
|
return;
|
|
|
|
tx_buffer = txr->tx_buffers;
|
|
for (i = 0; i < adapter->num_tx_desc; i++, tx_buffer++) {
|
|
if (tx_buffer->m_head != NULL) {
|
|
bus_dmamap_sync(txr->txtag, tx_buffer->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(txr->txtag,
|
|
tx_buffer->map);
|
|
m_freem(tx_buffer->m_head);
|
|
tx_buffer->m_head = NULL;
|
|
if (tx_buffer->map != NULL) {
|
|
bus_dmamap_destroy(txr->txtag,
|
|
tx_buffer->map);
|
|
tx_buffer->map = NULL;
|
|
}
|
|
} else if (tx_buffer->map != NULL) {
|
|
bus_dmamap_unload(txr->txtag,
|
|
tx_buffer->map);
|
|
bus_dmamap_destroy(txr->txtag,
|
|
tx_buffer->map);
|
|
tx_buffer->map = NULL;
|
|
}
|
|
}
|
|
#if __FreeBSD_version >= 800000
|
|
if (txr->br != NULL)
|
|
buf_ring_free(txr->br, M_DEVBUF);
|
|
#endif
|
|
if (txr->tx_buffers != NULL) {
|
|
free(txr->tx_buffers, M_DEVBUF);
|
|
txr->tx_buffers = NULL;
|
|
}
|
|
if (txr->txtag != NULL) {
|
|
bus_dma_tag_destroy(txr->txtag);
|
|
txr->txtag = NULL;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Advanced Context Descriptor setup for VLAN or CSUM
|
|
*
|
|
**********************************************************************/
|
|
|
|
static boolean_t
|
|
ixgbe_tx_ctx_setup(struct tx_ring *txr, struct mbuf *mp)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixgbe_adv_tx_context_desc *TXD;
|
|
struct ixgbe_tx_buf *tx_buffer;
|
|
u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
|
|
struct ether_vlan_header *eh;
|
|
struct ip *ip;
|
|
struct ip6_hdr *ip6;
|
|
int ehdrlen, ip_hlen = 0;
|
|
u16 etype;
|
|
u8 ipproto = 0;
|
|
bool offload = TRUE;
|
|
int ctxd = txr->next_avail_tx_desc;
|
|
u16 vtag = 0;
|
|
|
|
|
|
if ((mp->m_pkthdr.csum_flags & CSUM_OFFLOAD) == 0)
|
|
offload = FALSE;
|
|
|
|
tx_buffer = &txr->tx_buffers[ctxd];
|
|
TXD = (struct ixgbe_adv_tx_context_desc *) &txr->tx_base[ctxd];
|
|
|
|
/*
|
|
** In advanced descriptors the vlan tag must
|
|
** be placed into the descriptor itself.
|
|
*/
|
|
if (mp->m_flags & M_VLANTAG) {
|
|
vtag = htole16(mp->m_pkthdr.ether_vtag);
|
|
vlan_macip_lens |= (vtag << IXGBE_ADVTXD_VLAN_SHIFT);
|
|
} else if (offload == FALSE)
|
|
return FALSE;
|
|
|
|
/*
|
|
* Determine where frame payload starts.
|
|
* Jump over vlan headers if already present,
|
|
* helpful for QinQ too.
|
|
*/
|
|
eh = mtod(mp, struct ether_vlan_header *);
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
|
|
etype = ntohs(eh->evl_proto);
|
|
ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
} else {
|
|
etype = ntohs(eh->evl_encap_proto);
|
|
ehdrlen = ETHER_HDR_LEN;
|
|
}
|
|
|
|
/* Set the ether header length */
|
|
vlan_macip_lens |= ehdrlen << IXGBE_ADVTXD_MACLEN_SHIFT;
|
|
|
|
switch (etype) {
|
|
case ETHERTYPE_IP:
|
|
ip = (struct ip *)(mp->m_data + ehdrlen);
|
|
ip_hlen = ip->ip_hl << 2;
|
|
if (mp->m_len < ehdrlen + ip_hlen)
|
|
return (FALSE);
|
|
ipproto = ip->ip_p;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
|
|
break;
|
|
case ETHERTYPE_IPV6:
|
|
ip6 = (struct ip6_hdr *)(mp->m_data + ehdrlen);
|
|
ip_hlen = sizeof(struct ip6_hdr);
|
|
if (mp->m_len < ehdrlen + ip_hlen)
|
|
return (FALSE);
|
|
ipproto = ip6->ip6_nxt;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV6;
|
|
break;
|
|
default:
|
|
offload = FALSE;
|
|
break;
|
|
}
|
|
|
|
vlan_macip_lens |= ip_hlen;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_DCMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT;
|
|
|
|
switch (ipproto) {
|
|
case IPPROTO_TCP:
|
|
if (mp->m_pkthdr.csum_flags & CSUM_TCP)
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
|
|
break;
|
|
|
|
case IPPROTO_UDP:
|
|
if (mp->m_pkthdr.csum_flags & CSUM_UDP)
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_UDP;
|
|
break;
|
|
|
|
default:
|
|
offload = FALSE;
|
|
break;
|
|
}
|
|
|
|
/* Now copy bits into descriptor */
|
|
TXD->vlan_macip_lens |= htole32(vlan_macip_lens);
|
|
TXD->type_tucmd_mlhl |= htole32(type_tucmd_mlhl);
|
|
TXD->seqnum_seed = htole32(0);
|
|
TXD->mss_l4len_idx = htole32(0);
|
|
|
|
tx_buffer->m_head = NULL;
|
|
tx_buffer->eop_index = -1;
|
|
|
|
/* We've consumed the first desc, adjust counters */
|
|
if (++ctxd == adapter->num_tx_desc)
|
|
ctxd = 0;
|
|
txr->next_avail_tx_desc = ctxd;
|
|
--txr->tx_avail;
|
|
|
|
return (offload);
|
|
}
|
|
|
|
/**********************************************************************
|
|
*
|
|
* Setup work for hardware segmentation offload (TSO) on
|
|
* adapters using advanced tx descriptors
|
|
*
|
|
**********************************************************************/
|
|
static boolean_t
|
|
ixgbe_tso_setup(struct tx_ring *txr, struct mbuf *mp, u32 *paylen)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixgbe_adv_tx_context_desc *TXD;
|
|
struct ixgbe_tx_buf *tx_buffer;
|
|
u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
|
|
u32 mss_l4len_idx = 0;
|
|
u16 vtag = 0;
|
|
int ctxd, ehdrlen, hdrlen, ip_hlen, tcp_hlen;
|
|
struct ether_vlan_header *eh;
|
|
struct ip *ip;
|
|
struct tcphdr *th;
|
|
|
|
|
|
/*
|
|
* Determine where frame payload starts.
|
|
* Jump over vlan headers if already present
|
|
*/
|
|
eh = mtod(mp, struct ether_vlan_header *);
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN))
|
|
ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
else
|
|
ehdrlen = ETHER_HDR_LEN;
|
|
|
|
/* Ensure we have at least the IP+TCP header in the first mbuf. */
|
|
if (mp->m_len < ehdrlen + sizeof(struct ip) + sizeof(struct tcphdr))
|
|
return FALSE;
|
|
|
|
ctxd = txr->next_avail_tx_desc;
|
|
tx_buffer = &txr->tx_buffers[ctxd];
|
|
TXD = (struct ixgbe_adv_tx_context_desc *) &txr->tx_base[ctxd];
|
|
|
|
ip = (struct ip *)(mp->m_data + ehdrlen);
|
|
if (ip->ip_p != IPPROTO_TCP)
|
|
return FALSE; /* 0 */
|
|
ip->ip_sum = 0;
|
|
ip_hlen = ip->ip_hl << 2;
|
|
th = (struct tcphdr *)((caddr_t)ip + ip_hlen);
|
|
th->th_sum = in_pseudo(ip->ip_src.s_addr,
|
|
ip->ip_dst.s_addr, htons(IPPROTO_TCP));
|
|
tcp_hlen = th->th_off << 2;
|
|
hdrlen = ehdrlen + ip_hlen + tcp_hlen;
|
|
|
|
/* This is used in the transmit desc in encap */
|
|
*paylen = mp->m_pkthdr.len - hdrlen;
|
|
|
|
/* VLAN MACLEN IPLEN */
|
|
if (mp->m_flags & M_VLANTAG) {
|
|
vtag = htole16(mp->m_pkthdr.ether_vtag);
|
|
vlan_macip_lens |= (vtag << IXGBE_ADVTXD_VLAN_SHIFT);
|
|
}
|
|
|
|
vlan_macip_lens |= ehdrlen << IXGBE_ADVTXD_MACLEN_SHIFT;
|
|
vlan_macip_lens |= ip_hlen;
|
|
TXD->vlan_macip_lens |= htole32(vlan_macip_lens);
|
|
|
|
/* ADV DTYPE TUCMD */
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_DCMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
|
|
TXD->type_tucmd_mlhl |= htole32(type_tucmd_mlhl);
|
|
|
|
|
|
/* MSS L4LEN IDX */
|
|
mss_l4len_idx |= (mp->m_pkthdr.tso_segsz << IXGBE_ADVTXD_MSS_SHIFT);
|
|
mss_l4len_idx |= (tcp_hlen << IXGBE_ADVTXD_L4LEN_SHIFT);
|
|
TXD->mss_l4len_idx = htole32(mss_l4len_idx);
|
|
|
|
TXD->seqnum_seed = htole32(0);
|
|
tx_buffer->m_head = NULL;
|
|
tx_buffer->eop_index = -1;
|
|
|
|
if (++ctxd == adapter->num_tx_desc)
|
|
ctxd = 0;
|
|
|
|
txr->tx_avail--;
|
|
txr->next_avail_tx_desc = ctxd;
|
|
return TRUE;
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
*
|
|
* Examine each tx_buffer in the used queue. If the hardware is done
|
|
* processing the packet then free associated resources. The
|
|
* tx_buffer is put back on the free queue.
|
|
*
|
|
**********************************************************************/
|
|
static boolean_t
|
|
ixgbe_txeof(struct tx_ring *txr)
|
|
{
|
|
struct adapter * adapter = txr->adapter;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
u32 first, last, done, num_avail;
|
|
u32 cleaned = 0;
|
|
struct ixgbe_tx_buf *tx_buffer;
|
|
struct ixgbe_legacy_tx_desc *tx_desc, *eop_desc;
|
|
|
|
mtx_assert(&txr->tx_mtx, MA_OWNED);
|
|
|
|
if (txr->tx_avail == adapter->num_tx_desc)
|
|
return FALSE;
|
|
|
|
num_avail = txr->tx_avail;
|
|
first = txr->next_tx_to_clean;
|
|
|
|
tx_buffer = &txr->tx_buffers[first];
|
|
/* For cleanup we just use legacy struct */
|
|
tx_desc = (struct ixgbe_legacy_tx_desc *)&txr->tx_base[first];
|
|
last = tx_buffer->eop_index;
|
|
if (last == -1)
|
|
return FALSE;
|
|
|
|
eop_desc = (struct ixgbe_legacy_tx_desc *)&txr->tx_base[last];
|
|
/*
|
|
** Get the index of the first descriptor
|
|
** BEYOND the EOP and call that 'done'.
|
|
** I do this so the comparison in the
|
|
** inner while loop below can be simple
|
|
*/
|
|
if (++last == adapter->num_tx_desc) last = 0;
|
|
done = last;
|
|
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
/*
|
|
** Only the EOP descriptor of a packet now has the DD
|
|
** bit set, this is what we look for...
|
|
*/
|
|
while (eop_desc->upper.fields.status & IXGBE_TXD_STAT_DD) {
|
|
/* We clean the range of the packet */
|
|
while (first != done) {
|
|
tx_desc->upper.data = 0;
|
|
tx_desc->lower.data = 0;
|
|
tx_desc->buffer_addr = 0;
|
|
num_avail++; cleaned++;
|
|
|
|
if (tx_buffer->m_head) {
|
|
ifp->if_opackets++;
|
|
bus_dmamap_sync(txr->txtag,
|
|
tx_buffer->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(txr->txtag,
|
|
tx_buffer->map);
|
|
m_freem(tx_buffer->m_head);
|
|
tx_buffer->m_head = NULL;
|
|
tx_buffer->map = NULL;
|
|
}
|
|
tx_buffer->eop_index = -1;
|
|
|
|
if (++first == adapter->num_tx_desc)
|
|
first = 0;
|
|
|
|
tx_buffer = &txr->tx_buffers[first];
|
|
tx_desc =
|
|
(struct ixgbe_legacy_tx_desc *)&txr->tx_base[first];
|
|
}
|
|
/* See if there is more work now */
|
|
last = tx_buffer->eop_index;
|
|
if (last != -1) {
|
|
eop_desc =
|
|
(struct ixgbe_legacy_tx_desc *)&txr->tx_base[last];
|
|
/* Get next done point */
|
|
if (++last == adapter->num_tx_desc) last = 0;
|
|
done = last;
|
|
} else
|
|
break;
|
|
}
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
txr->next_tx_to_clean = first;
|
|
|
|
/*
|
|
* If we have enough room, clear IFF_DRV_OACTIVE to tell the stack that
|
|
* it is OK to send packets. If there are no pending descriptors,
|
|
* clear the timeout. Otherwise, if some descriptors have been freed,
|
|
* restart the timeout.
|
|
*/
|
|
if (num_avail > IXGBE_TX_CLEANUP_THRESHOLD) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
/* If all are clean turn off the timer */
|
|
if (num_avail == adapter->num_tx_desc) {
|
|
txr->watchdog_timer = 0;
|
|
txr->tx_avail = num_avail;
|
|
return FALSE;
|
|
}
|
|
}
|
|
|
|
/* Some were cleaned, so reset timer */
|
|
if (cleaned)
|
|
txr->watchdog_timer = IXGBE_TX_TIMEOUT;
|
|
txr->tx_avail = num_avail;
|
|
return TRUE;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Get a buffer from system mbuf buffer pool.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_get_buf(struct rx_ring *rxr, int i, u8 clean)
|
|
{
|
|
struct adapter *adapter = rxr->adapter;
|
|
bus_dma_segment_t seg[2];
|
|
struct ixgbe_rx_buf *rxbuf;
|
|
struct mbuf *mh, *mp;
|
|
bus_dmamap_t map;
|
|
int nsegs, error;
|
|
int merr = 0;
|
|
|
|
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
|
|
/* First get our header and payload mbuf */
|
|
if (clean & IXGBE_CLEAN_HDR) {
|
|
mh = m_gethdr(M_DONTWAIT, MT_DATA);
|
|
if (mh == NULL)
|
|
goto remap;
|
|
} else /* reuse */
|
|
mh = rxr->rx_buffers[i].m_head;
|
|
|
|
mh->m_len = MHLEN;
|
|
mh->m_flags |= M_PKTHDR;
|
|
|
|
if (clean & IXGBE_CLEAN_PKT) {
|
|
mp = m_getjcl(M_DONTWAIT, MT_DATA,
|
|
M_PKTHDR, adapter->rx_mbuf_sz);
|
|
if (mp == NULL)
|
|
goto remap;
|
|
mp->m_len = adapter->rx_mbuf_sz;
|
|
mp->m_flags &= ~M_PKTHDR;
|
|
} else { /* reusing */
|
|
mp = rxr->rx_buffers[i].m_pack;
|
|
mp->m_len = adapter->rx_mbuf_sz;
|
|
mp->m_flags &= ~M_PKTHDR;
|
|
}
|
|
/*
|
|
** Need to create a chain for the following
|
|
** dmamap call at this point.
|
|
*/
|
|
mh->m_next = mp;
|
|
mh->m_pkthdr.len = mh->m_len + mp->m_len;
|
|
|
|
/* Get the memory mapping */
|
|
error = bus_dmamap_load_mbuf_sg(rxr->rxtag,
|
|
rxr->spare_map, mh, seg, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
printf("GET BUF: dmamap load failure - %d\n", error);
|
|
m_free(mh);
|
|
return (error);
|
|
}
|
|
|
|
/* Unload old mapping and update buffer struct */
|
|
if (rxbuf->m_head != NULL)
|
|
bus_dmamap_unload(rxr->rxtag, rxbuf->map);
|
|
map = rxbuf->map;
|
|
rxbuf->map = rxr->spare_map;
|
|
rxr->spare_map = map;
|
|
rxbuf->m_head = mh;
|
|
rxbuf->m_pack = mp;
|
|
bus_dmamap_sync(rxr->rxtag,
|
|
rxbuf->map, BUS_DMASYNC_PREREAD);
|
|
|
|
/* Update descriptor */
|
|
rxr->rx_base[i].read.hdr_addr = htole64(seg[0].ds_addr);
|
|
rxr->rx_base[i].read.pkt_addr = htole64(seg[1].ds_addr);
|
|
|
|
return (0);
|
|
|
|
/*
|
|
** If we get here, we have an mbuf resource
|
|
** issue, so we discard the incoming packet
|
|
** and attempt to reuse existing mbufs next
|
|
** pass thru the ring, but to do so we must
|
|
** fix up the descriptor which had the address
|
|
** clobbered with writeback info.
|
|
*/
|
|
remap:
|
|
adapter->mbuf_header_failed++;
|
|
merr = ENOBUFS;
|
|
/* Is there a reusable buffer? */
|
|
mh = rxr->rx_buffers[i].m_head;
|
|
if (mh == NULL) /* Nope, init error */
|
|
return (merr);
|
|
mp = rxr->rx_buffers[i].m_pack;
|
|
if (mp == NULL) /* Nope, init error */
|
|
return (merr);
|
|
/* Get our old mapping */
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
error = bus_dmamap_load_mbuf_sg(rxr->rxtag,
|
|
rxbuf->map, mh, seg, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
/* We really have a problem */
|
|
m_free(mh);
|
|
return (error);
|
|
}
|
|
/* Now fix the descriptor as needed */
|
|
rxr->rx_base[i].read.hdr_addr = htole64(seg[0].ds_addr);
|
|
rxr->rx_base[i].read.pkt_addr = htole64(seg[1].ds_addr);
|
|
|
|
return (merr);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Allocate memory for rx_buffer structures. Since we use one
|
|
* rx_buffer per received packet, the maximum number of rx_buffer's
|
|
* that we'll need is equal to the number of receive descriptors
|
|
* that we've allocated.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_receive_buffers(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter = rxr->adapter;
|
|
device_t dev = adapter->dev;
|
|
struct ixgbe_rx_buf *rxbuf;
|
|
int i, bsize, error;
|
|
|
|
bsize = sizeof(struct ixgbe_rx_buf) * adapter->num_rx_desc;
|
|
if (!(rxr->rx_buffers =
|
|
(struct ixgbe_rx_buf *) malloc(bsize,
|
|
M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate rx_buffer memory\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
** The tag is made to accomodate the largest buffer size
|
|
** with packet split (hence the two segments, even though
|
|
** it may not always use this.
|
|
*/
|
|
if ((error = bus_dma_tag_create(NULL, /* parent */
|
|
1, 0, /* alignment, bounds */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
MJUM16BYTES, /* maxsize */
|
|
2, /* nsegments */
|
|
MJUMPAGESIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, /* lockfunc */
|
|
NULL, /* lockfuncarg */
|
|
&rxr->rxtag))) {
|
|
device_printf(dev, "Unable to create RX DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Create the spare map (used by getbuf) */
|
|
error = bus_dmamap_create(rxr->rxtag, BUS_DMA_NOWAIT,
|
|
&rxr->spare_map);
|
|
if (error) {
|
|
device_printf(dev, "%s: bus_dmamap_create failed: %d\n",
|
|
__func__, error);
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0; i < adapter->num_rx_desc; i++, rxbuf++) {
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
error = bus_dmamap_create(rxr->rxtag,
|
|
BUS_DMA_NOWAIT, &rxbuf->map);
|
|
if (error) {
|
|
device_printf(dev, "Unable to create RX DMA map\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
|
|
fail:
|
|
/* Frees all, but can handle partial completion */
|
|
ixgbe_free_receive_structures(adapter);
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize a receive ring and its buffers.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_setup_receive_ring(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter;
|
|
struct ifnet *ifp;
|
|
device_t dev;
|
|
struct ixgbe_rx_buf *rxbuf;
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
int j, rsize;
|
|
|
|
adapter = rxr->adapter;
|
|
ifp = adapter->ifp;
|
|
dev = adapter->dev;
|
|
|
|
/* Clear the ring contents */
|
|
rsize = roundup2(adapter->num_rx_desc *
|
|
sizeof(union ixgbe_adv_rx_desc), DBA_ALIGN);
|
|
bzero((void *)rxr->rx_base, rsize);
|
|
|
|
/*
|
|
** Free current RX buffer structs and their mbufs
|
|
*/
|
|
for (int i = 0; i < adapter->num_rx_desc; i++) {
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
if (rxbuf->m_head != NULL) {
|
|
bus_dmamap_sync(rxr->rxtag, rxbuf->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->rxtag, rxbuf->map);
|
|
if (rxbuf->m_head) {
|
|
rxbuf->m_head->m_next = rxbuf->m_pack;
|
|
m_freem(rxbuf->m_head);
|
|
}
|
|
rxbuf->m_head = NULL;
|
|
rxbuf->m_pack = NULL;
|
|
}
|
|
}
|
|
|
|
/* Now refresh the mbufs */
|
|
for (j = 0; j < adapter->num_rx_desc; j++) {
|
|
if (ixgbe_get_buf(rxr, j, IXGBE_CLEAN_ALL) == ENOBUFS) {
|
|
rxr->rx_buffers[j].m_head = NULL;
|
|
rxr->rx_buffers[j].m_pack = NULL;
|
|
rxr->rx_base[j].read.hdr_addr = 0;
|
|
rxr->rx_base[j].read.pkt_addr = 0;
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/* Setup our descriptor indices */
|
|
rxr->next_to_check = 0;
|
|
rxr->last_cleaned = 0;
|
|
rxr->lro_enabled = FALSE;
|
|
|
|
/* Use header split if configured */
|
|
if (ixgbe_header_split)
|
|
rxr->hdr_split = TRUE;
|
|
|
|
bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
/*
|
|
** Now set up the LRO interface, we
|
|
** also only do head split when LRO
|
|
** is enabled, since so often they
|
|
** are undesireable in similar setups.
|
|
*/
|
|
if (ifp->if_capenable & IFCAP_LRO) {
|
|
int err = tcp_lro_init(lro);
|
|
if (err) {
|
|
INIT_DEBUGOUT("LRO Initialization failed!\n");
|
|
goto fail;
|
|
}
|
|
INIT_DEBUGOUT("RX LRO Initialized\n");
|
|
rxr->lro_enabled = TRUE;
|
|
lro->ifp = adapter->ifp;
|
|
}
|
|
|
|
return (0);
|
|
|
|
fail:
|
|
/*
|
|
* We need to clean up any buffers allocated
|
|
* so far, 'j' is the failing index.
|
|
*/
|
|
for (int i = 0; i < j; i++) {
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
if (rxbuf->m_head != NULL) {
|
|
bus_dmamap_sync(rxr->rxtag, rxbuf->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->rxtag, rxbuf->map);
|
|
m_freem(rxbuf->m_head);
|
|
rxbuf->m_head = NULL;
|
|
}
|
|
}
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize all receive rings.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_setup_receive_structures(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
int j;
|
|
|
|
for (j = 0; j < adapter->num_queues; j++, rxr++)
|
|
if (ixgbe_setup_receive_ring(rxr))
|
|
goto fail;
|
|
|
|
return (0);
|
|
fail:
|
|
/*
|
|
* Free RX buffers allocated so far, we will only handle
|
|
* the rings that completed, the failing case will have
|
|
* cleaned up for itself. 'j' failed, so its the terminus.
|
|
*/
|
|
for (int i = 0; i < j; ++i) {
|
|
rxr = &adapter->rx_rings[i];
|
|
for (int n = 0; n < adapter->num_rx_desc; n++) {
|
|
struct ixgbe_rx_buf *rxbuf;
|
|
rxbuf = &rxr->rx_buffers[n];
|
|
if (rxbuf->m_head != NULL) {
|
|
bus_dmamap_sync(rxr->rxtag, rxbuf->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->rxtag, rxbuf->map);
|
|
m_freem(rxbuf->m_head);
|
|
rxbuf->m_head = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup receive registers and features.
|
|
*
|
|
**********************************************************************/
|
|
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
|
|
|
|
static void
|
|
ixgbe_initialize_receive_units(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
u32 bufsz, rxctrl, fctrl, srrctl, rxcsum;
|
|
u32 reta, mrqc = 0, hlreg, random[10];
|
|
|
|
|
|
/*
|
|
* Make sure receives are disabled while
|
|
* setting up the descriptor ring
|
|
*/
|
|
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL,
|
|
rxctrl & ~IXGBE_RXCTRL_RXEN);
|
|
|
|
/* Enable broadcasts */
|
|
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
|
|
fctrl |= IXGBE_FCTRL_BAM;
|
|
fctrl |= IXGBE_FCTRL_DPF;
|
|
fctrl |= IXGBE_FCTRL_PMCF;
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
|
|
|
|
/* Set for Jumbo Frames? */
|
|
hlreg = IXGBE_READ_REG(hw, IXGBE_HLREG0);
|
|
if (ifp->if_mtu > ETHERMTU) {
|
|
hlreg |= IXGBE_HLREG0_JUMBOEN;
|
|
bufsz = 4096 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
|
|
} else {
|
|
hlreg &= ~IXGBE_HLREG0_JUMBOEN;
|
|
bufsz = 2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
|
|
}
|
|
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg);
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
u64 rdba = rxr->rxdma.dma_paddr;
|
|
|
|
/* Setup the Base and Length of the Rx Descriptor Ring */
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDBAL(i),
|
|
(rdba & 0x00000000ffffffffULL));
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDBAH(i), (rdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDLEN(i),
|
|
adapter->num_rx_desc * sizeof(union ixgbe_adv_rx_desc));
|
|
|
|
/* Set up the SRRCTL register */
|
|
srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
|
|
srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
|
|
srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
|
|
srrctl |= bufsz;
|
|
if (rxr->hdr_split) {
|
|
/* Use a standard mbuf for the header */
|
|
srrctl |= ((IXGBE_RX_HDR <<
|
|
IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT)
|
|
& IXGBE_SRRCTL_BSIZEHDR_MASK);
|
|
srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
/* PSRTYPE must be initialized in 82599 */
|
|
u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
|
|
IXGBE_PSRTYPE_UDPHDR |
|
|
IXGBE_PSRTYPE_IPV4HDR |
|
|
IXGBE_PSRTYPE_IPV6HDR;
|
|
IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
|
|
}
|
|
} else
|
|
srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(i), srrctl);
|
|
|
|
/* Setup the HW Rx Head and Tail Descriptor Pointers */
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDH(i), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDT(i), 0);
|
|
}
|
|
|
|
rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
|
|
|
|
/* Setup RSS */
|
|
if (adapter->num_queues > 1) {
|
|
int i, j;
|
|
reta = 0;
|
|
|
|
/* set up random bits */
|
|
arc4rand(&random, sizeof(random), 0);
|
|
|
|
/* Set up the redirection table */
|
|
for (i = 0, j = 0; i < 128; i++, j++) {
|
|
if (j == adapter->num_queues) j = 0;
|
|
reta = (reta << 8) | (j * 0x11);
|
|
if ((i & 3) == 3)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta);
|
|
}
|
|
|
|
/* Now fill our hash function seeds */
|
|
for (int i = 0; i < 10; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), random[i]);
|
|
|
|
/* Perform hash on these packet types */
|
|
mrqc = IXGBE_MRQC_RSSEN
|
|
| IXGBE_MRQC_RSS_FIELD_IPV4
|
|
| IXGBE_MRQC_RSS_FIELD_IPV4_TCP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV4_UDP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_EX
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_TCP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_UDP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP;
|
|
IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
|
|
|
|
/* RSS and RX IPP Checksum are mutually exclusive */
|
|
rxcsum |= IXGBE_RXCSUM_PCSD;
|
|
}
|
|
|
|
if (ifp->if_capenable & IFCAP_RXCSUM)
|
|
rxcsum |= IXGBE_RXCSUM_PCSD;
|
|
|
|
if (!(rxcsum & IXGBE_RXCSUM_PCSD))
|
|
rxcsum |= IXGBE_RXCSUM_IPPCSE;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free all receive rings.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_free_receive_structures(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
ixgbe_free_receive_buffers(rxr);
|
|
/* Free LRO memory */
|
|
tcp_lro_free(lro);
|
|
/* Free the ring memory as well */
|
|
ixgbe_dma_free(adapter, &rxr->rxdma);
|
|
}
|
|
|
|
free(adapter->rx_rings, M_DEVBUF);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free receive ring data structures
|
|
*
|
|
**********************************************************************/
|
|
void
|
|
ixgbe_free_receive_buffers(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter = NULL;
|
|
struct ixgbe_rx_buf *rxbuf = NULL;
|
|
|
|
INIT_DEBUGOUT("free_receive_buffers: begin");
|
|
adapter = rxr->adapter;
|
|
if (rxr->rx_buffers != NULL) {
|
|
rxbuf = &rxr->rx_buffers[0];
|
|
for (int i = 0; i < adapter->num_rx_desc; i++) {
|
|
if (rxbuf->map != NULL) {
|
|
bus_dmamap_sync(rxr->rxtag, rxbuf->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->rxtag, rxbuf->map);
|
|
bus_dmamap_destroy(rxr->rxtag, rxbuf->map);
|
|
}
|
|
if (rxbuf->m_head != NULL) {
|
|
m_freem(rxbuf->m_head);
|
|
}
|
|
rxbuf->m_head = NULL;
|
|
++rxbuf;
|
|
}
|
|
}
|
|
if (rxr->rx_buffers != NULL) {
|
|
free(rxr->rx_buffers, M_DEVBUF);
|
|
rxr->rx_buffers = NULL;
|
|
}
|
|
if (rxr->rxtag != NULL) {
|
|
bus_dma_tag_destroy(rxr->rxtag);
|
|
rxr->rxtag = NULL;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* This routine executes in interrupt context. It replenishes
|
|
* the mbufs in the descriptor and sends data which has been
|
|
* dma'ed into host memory to upper layer.
|
|
*
|
|
* We loop at most count times if count is > 0, or until done if
|
|
* count < 0.
|
|
*
|
|
* Return TRUE for more work, FALSE for all clean.
|
|
*********************************************************************/
|
|
static bool
|
|
ixgbe_rxeof(struct rx_ring *rxr, int count)
|
|
{
|
|
struct adapter *adapter = rxr->adapter;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
struct lro_entry *queued;
|
|
int i;
|
|
u32 staterr;
|
|
union ixgbe_adv_rx_desc *cur;
|
|
|
|
|
|
IXGBE_RX_LOCK(rxr);
|
|
i = rxr->next_to_check;
|
|
cur = &rxr->rx_base[i];
|
|
staterr = cur->wb.upper.status_error;
|
|
|
|
if (!(staterr & IXGBE_RXD_STAT_DD)) {
|
|
IXGBE_RX_UNLOCK(rxr);
|
|
return FALSE;
|
|
}
|
|
|
|
/* Sync the ring */
|
|
bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
|
|
while ((staterr & IXGBE_RXD_STAT_DD) && (count != 0) &&
|
|
(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
|
|
struct mbuf *sendmp, *mh, *mp;
|
|
u16 hlen, plen, hdr, vtag;
|
|
u8 dopayload, accept_frame, eop;
|
|
|
|
|
|
accept_frame = 1;
|
|
hlen = plen = vtag = 0;
|
|
sendmp = mh = mp = NULL;
|
|
|
|
/* Sync the buffers */
|
|
bus_dmamap_sync(rxr->rxtag, rxr->rx_buffers[i].map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
|
|
/*
|
|
** The way the hardware is configured to
|
|
** split, it will ONLY use the header buffer
|
|
** when header split is enabled, otherwise we
|
|
** get normal behavior, ie, both header and
|
|
** payload are DMA'd into the payload buffer.
|
|
**
|
|
** The fmp test is to catch the case where a
|
|
** packet spans multiple descriptors, in that
|
|
** case only the first header is valid.
|
|
*/
|
|
if ((rxr->hdr_split) && (rxr->fmp == NULL)){
|
|
hdr = le16toh(cur->
|
|
wb.lower.lo_dword.hs_rss.hdr_info);
|
|
hlen = (hdr & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
|
|
IXGBE_RXDADV_HDRBUFLEN_SHIFT;
|
|
if (hlen > IXGBE_RX_HDR)
|
|
hlen = IXGBE_RX_HDR;
|
|
plen = le16toh(cur->wb.upper.length);
|
|
/* Handle the header mbuf */
|
|
mh = rxr->rx_buffers[i].m_head;
|
|
mh->m_len = hlen;
|
|
dopayload = IXGBE_CLEAN_HDR;
|
|
/*
|
|
** Get the payload length, this
|
|
** could be zero if its a small
|
|
** packet.
|
|
*/
|
|
if (plen) {
|
|
mp = rxr->rx_buffers[i].m_pack;
|
|
mp->m_len = plen;
|
|
mp->m_next = NULL;
|
|
mp->m_flags &= ~M_PKTHDR;
|
|
mh->m_next = mp;
|
|
mh->m_flags |= M_PKTHDR;
|
|
dopayload = IXGBE_CLEAN_ALL;
|
|
rxr->rx_split_packets++;
|
|
} else { /* small packets */
|
|
mh->m_flags &= ~M_PKTHDR;
|
|
mh->m_next = NULL;
|
|
}
|
|
} else {
|
|
/*
|
|
** Either no header split, or a
|
|
** secondary piece of a fragmented
|
|
** split packet.
|
|
*/
|
|
mh = rxr->rx_buffers[i].m_pack;
|
|
mh->m_flags |= M_PKTHDR;
|
|
mh->m_len = le16toh(cur->wb.upper.length);
|
|
dopayload = IXGBE_CLEAN_PKT;
|
|
}
|
|
|
|
if (staterr & IXGBE_RXD_STAT_EOP) {
|
|
count--;
|
|
eop = 1;
|
|
} else
|
|
eop = 0;
|
|
|
|
#ifdef IXGBE_IEEE1588
|
|
This code needs to be converted to work here
|
|
-----------------------------------------------------
|
|
if (unlikely(staterr & IXGBE_RXD_STAT_TS)) {
|
|
u64 regval;
|
|
u64 ns;
|
|
// Create an mtag and set it up
|
|
struct skb_shared_hwtstamps *shhwtstamps =
|
|
skb_hwtstamps(skb);
|
|
|
|
rd32(IXGBE_TSYNCRXCTL) & IXGBE_TSYNCRXCTL_VALID),
|
|
"igb: no RX time stamp available for time stamped packet");
|
|
regval = rd32(IXGBE_RXSTMPL);
|
|
regval |= (u64)rd32(IXGBE_RXSTMPH) << 32;
|
|
// Do time conversion from the register
|
|
ns = timecounter_cyc2time(&adapter->clock, regval);
|
|
clocksync_update(&adapter->sync, ns);
|
|
memset(shhwtstamps, 0, sizeof(*shhwtstamps));
|
|
shhwtstamps->hwtstamp = ns_to_ktime(ns);
|
|
shhwtstamps->syststamp =
|
|
clocksync_hw2sys(&adapter->sync, ns);
|
|
}
|
|
#endif
|
|
|
|
if (staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK)
|
|
accept_frame = 0;
|
|
|
|
if (accept_frame) {
|
|
/*
|
|
** Save the vlan id, because get_buf will
|
|
** clobber the writeback descriptor...
|
|
*/
|
|
vtag = le16toh(cur->wb.upper.vlan);
|
|
if (ixgbe_get_buf(rxr, i, dopayload) != 0) {
|
|
ifp->if_iqdrops++;
|
|
goto discard;
|
|
}
|
|
/* Initial frame - setup */
|
|
if (rxr->fmp == NULL) {
|
|
mh->m_flags |= M_PKTHDR;
|
|
mh->m_pkthdr.len = mh->m_len;
|
|
rxr->fmp = mh; /* Store the first mbuf */
|
|
rxr->lmp = mh;
|
|
if (mp) { /* Add payload if split */
|
|
mh->m_pkthdr.len += mp->m_len;
|
|
rxr->lmp = mh->m_next;
|
|
}
|
|
} else {
|
|
/* Chain mbuf's together */
|
|
mh->m_flags &= ~M_PKTHDR;
|
|
rxr->lmp->m_next = mh;
|
|
rxr->lmp = rxr->lmp->m_next;
|
|
rxr->fmp->m_pkthdr.len += mh->m_len;
|
|
}
|
|
|
|
if (eop) {
|
|
rxr->fmp->m_pkthdr.rcvif = ifp;
|
|
ifp->if_ipackets++;
|
|
rxr->rx_packets++;
|
|
/* capture data for AIM */
|
|
rxr->bytes += rxr->fmp->m_pkthdr.len;
|
|
rxr->rx_bytes += rxr->bytes;
|
|
if (ifp->if_capenable & IFCAP_RXCSUM)
|
|
ixgbe_rx_checksum(staterr, rxr->fmp);
|
|
else
|
|
rxr->fmp->m_pkthdr.csum_flags = 0;
|
|
if (staterr & IXGBE_RXD_STAT_VP) {
|
|
rxr->fmp->m_pkthdr.ether_vtag = vtag;
|
|
rxr->fmp->m_flags |= M_VLANTAG;
|
|
}
|
|
#if __FreeBSD_version >= 800000
|
|
rxr->fmp->m_pkthdr.flowid = curcpu;
|
|
rxr->fmp->m_flags |= M_FLOWID;
|
|
#endif
|
|
sendmp = rxr->fmp;
|
|
rxr->fmp = NULL;
|
|
rxr->lmp = NULL;
|
|
}
|
|
} else {
|
|
ifp->if_ierrors++;
|
|
discard:
|
|
/* Reuse loaded DMA map and just update mbuf chain */
|
|
if (hlen) {
|
|
mh = rxr->rx_buffers[i].m_head;
|
|
mh->m_len = MHLEN;
|
|
mh->m_next = NULL;
|
|
}
|
|
mp = rxr->rx_buffers[i].m_pack;
|
|
mp->m_len = mp->m_pkthdr.len = adapter->rx_mbuf_sz;
|
|
mp->m_data = mp->m_ext.ext_buf;
|
|
mp->m_next = NULL;
|
|
if (adapter->max_frame_size <=
|
|
(MCLBYTES - ETHER_ALIGN))
|
|
m_adj(mp, ETHER_ALIGN);
|
|
if (rxr->fmp != NULL) {
|
|
/* handles the whole chain */
|
|
m_freem(rxr->fmp);
|
|
rxr->fmp = NULL;
|
|
rxr->lmp = NULL;
|
|
}
|
|
sendmp = NULL;
|
|
}
|
|
bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
rxr->last_cleaned = i; /* for updating tail */
|
|
|
|
if (++i == adapter->num_rx_desc)
|
|
i = 0;
|
|
|
|
/*
|
|
** Now send up to the stack,
|
|
** note the the value of next_to_check
|
|
** is safe because we keep the RX lock
|
|
** thru this call.
|
|
*/
|
|
if (sendmp != NULL) {
|
|
/*
|
|
** Send to the stack if:
|
|
** - LRO not enabled, or
|
|
** - no LRO resources, or
|
|
** - lro enqueue fails
|
|
*/
|
|
if ((!rxr->lro_enabled) ||
|
|
((!lro->lro_cnt) || (tcp_lro_rx(lro, sendmp, 0))))
|
|
(*ifp->if_input)(ifp, sendmp);
|
|
}
|
|
|
|
/* Get next descriptor */
|
|
cur = &rxr->rx_base[i];
|
|
staterr = cur->wb.upper.status_error;
|
|
}
|
|
rxr->next_to_check = i;
|
|
|
|
/* Advance the IXGB's Receive Queue "Tail Pointer" */
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDT(rxr->me), rxr->last_cleaned);
|
|
|
|
/*
|
|
* Flush any outstanding LRO work
|
|
*/
|
|
while (!SLIST_EMPTY(&lro->lro_active)) {
|
|
queued = SLIST_FIRST(&lro->lro_active);
|
|
SLIST_REMOVE_HEAD(&lro->lro_active, next);
|
|
tcp_lro_flush(lro, queued);
|
|
}
|
|
|
|
IXGBE_RX_UNLOCK(rxr);
|
|
|
|
/*
|
|
** Leaving with more to clean?
|
|
** then schedule another interrupt.
|
|
*/
|
|
if (staterr & IXGBE_RXD_STAT_DD) {
|
|
ixgbe_rearm_rx_queues(adapter, (u64)(1 << rxr->msix));
|
|
return TRUE;
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Verify that the hardware indicated that the checksum is valid.
|
|
* Inform the stack about the status of checksum so that stack
|
|
* doesn't spend time verifying the checksum.
|
|
*
|
|
*********************************************************************/
|
|
static void
|
|
ixgbe_rx_checksum(u32 staterr, struct mbuf * mp)
|
|
{
|
|
u16 status = (u16) staterr;
|
|
u8 errors = (u8) (staterr >> 24);
|
|
|
|
if (status & IXGBE_RXD_STAT_IPCS) {
|
|
/* Did it pass? */
|
|
if (!(errors & IXGBE_RXD_ERR_IPE)) {
|
|
/* IP Checksum Good */
|
|
mp->m_pkthdr.csum_flags = CSUM_IP_CHECKED;
|
|
mp->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
|
|
} else
|
|
mp->m_pkthdr.csum_flags = 0;
|
|
}
|
|
if (status & IXGBE_RXD_STAT_L4CS) {
|
|
/* Did it pass? */
|
|
if (!(errors & IXGBE_RXD_ERR_TCPE)) {
|
|
mp->m_pkthdr.csum_flags |=
|
|
(CSUM_DATA_VALID | CSUM_PSEUDO_HDR);
|
|
mp->m_pkthdr.csum_data = htons(0xffff);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
** This routine is run via an vlan config EVENT,
|
|
** it enables us to use the HW Filter table since
|
|
** we can get the vlan id. This just creates the
|
|
** entry in the soft version of the VFTA, init will
|
|
** repopulate the real table.
|
|
*/
|
|
static void
|
|
ixgbe_register_vlan(void *arg, struct ifnet *ifp, u16 vtag)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
u16 index, bit;
|
|
|
|
if (ifp->if_softc != arg) /* Not our event */
|
|
return;
|
|
|
|
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
|
|
return;
|
|
|
|
index = (vtag >> 5) & 0x7F;
|
|
bit = vtag & 0x1F;
|
|
ixgbe_shadow_vfta[index] |= (1 << bit);
|
|
++adapter->num_vlans;
|
|
/* Re-init to load the changes */
|
|
ixgbe_init(adapter);
|
|
}
|
|
|
|
/*
|
|
** This routine is run via an vlan
|
|
** unconfig EVENT, remove our entry
|
|
** in the soft vfta.
|
|
*/
|
|
static void
|
|
ixgbe_unregister_vlan(void *arg, struct ifnet *ifp, u16 vtag)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
u16 index, bit;
|
|
|
|
if (ifp->if_softc != arg)
|
|
return;
|
|
|
|
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
|
|
return;
|
|
|
|
index = (vtag >> 5) & 0x7F;
|
|
bit = vtag & 0x1F;
|
|
ixgbe_shadow_vfta[index] &= ~(1 << bit);
|
|
--adapter->num_vlans;
|
|
/* Re-init to load the changes */
|
|
ixgbe_init(adapter);
|
|
}
|
|
|
|
static void
|
|
ixgbe_setup_vlan_hw_support(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 ctrl;
|
|
|
|
|
|
/*
|
|
** We get here thru init_locked, meaning
|
|
** a soft reset, this has already cleared
|
|
** the VFTA and other state, so if there
|
|
** have been no vlan's registered do nothing.
|
|
*/
|
|
if (adapter->num_vlans == 0)
|
|
return;
|
|
|
|
/*
|
|
** A soft reset zero's out the VFTA, so
|
|
** we need to repopulate it now.
|
|
*/
|
|
for (int i = 0; i < IXGBE_VFTA_SIZE; i++)
|
|
if (ixgbe_shadow_vfta[i] != 0)
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTA(i),
|
|
ixgbe_shadow_vfta[i]);
|
|
|
|
/* Enable the Filter Table */
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
|
|
ctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
|
ctrl |= IXGBE_VLNCTRL_VFE;
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
ctrl |= IXGBE_VLNCTRL_VME;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, ctrl);
|
|
|
|
/* On 82599 the VLAN enable is per/queue in RXDCTL */
|
|
if (hw->mac.type == ixgbe_mac_82599EB)
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
|
|
ctrl |= IXGBE_RXDCTL_VME;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), ctrl);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixgbe_enable_intr(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
u32 mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
|
|
|
|
|
|
/* Enable Fan Failure detection */
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT)
|
|
mask |= IXGBE_EIMS_GPI_SDP1;
|
|
|
|
/* 82599 specific interrupts */
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
mask |= IXGBE_EIMS_ECC;
|
|
mask |= IXGBE_EIMS_GPI_SDP1;
|
|
mask |= IXGBE_EIMS_GPI_SDP2;
|
|
}
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
|
|
|
|
/* With RSS we use auto clear */
|
|
if (adapter->msix_mem) {
|
|
mask = IXGBE_EIMS_ENABLE_MASK;
|
|
/* Dont autoclear Link */
|
|
mask &= ~IXGBE_EIMS_OTHER;
|
|
mask &= ~IXGBE_EIMS_LSC;
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAC, mask);
|
|
}
|
|
|
|
/*
|
|
** Now enable all queues, this is done seperately to
|
|
** allow for handling the extended (beyond 32) MSIX
|
|
** vectors that can be used by 82599
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++)
|
|
ixgbe_enable_queue(adapter, rxr->msix);
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++)
|
|
ixgbe_enable_queue(adapter, txr->msix);
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixgbe_disable_intr(struct adapter *adapter)
|
|
{
|
|
if (adapter->msix_mem)
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, 0);
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
|
|
} else {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
|
|
}
|
|
IXGBE_WRITE_FLUSH(&adapter->hw);
|
|
return;
|
|
}
|
|
|
|
u16
|
|
ixgbe_read_pci_cfg(struct ixgbe_hw *hw, u32 reg)
|
|
{
|
|
u16 value;
|
|
|
|
value = pci_read_config(((struct ixgbe_osdep *)hw->back)->dev,
|
|
reg, 2);
|
|
|
|
return (value);
|
|
}
|
|
|
|
void
|
|
ixgbe_write_pci_cfg(struct ixgbe_hw *hw, u32 reg, u16 value)
|
|
{
|
|
pci_write_config(((struct ixgbe_osdep *)hw->back)->dev,
|
|
reg, value, 2);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Setup the correct IVAR register for a particular MSIX interrupt
|
|
** (yes this is all very magic and confusing :)
|
|
** - entry is the register array entry
|
|
** - vector is the MSIX vector for this queue
|
|
** - type is RX/TX/MISC
|
|
*/
|
|
static void
|
|
ixgbe_set_ivar(struct adapter *adapter, u8 entry, u8 vector, s8 type)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 ivar, index;
|
|
|
|
vector |= IXGBE_IVAR_ALLOC_VAL;
|
|
|
|
switch (hw->mac.type) {
|
|
|
|
case ixgbe_mac_82598EB:
|
|
if (type == -1)
|
|
entry = IXGBE_IVAR_OTHER_CAUSES_INDEX;
|
|
else
|
|
entry += (type * 64);
|
|
index = (entry >> 2) & 0x1F;
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index));
|
|
ivar &= ~(0xFF << (8 * (entry & 0x3)));
|
|
ivar |= (vector << (8 * (entry & 0x3)));
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR(index), ivar);
|
|
break;
|
|
|
|
case ixgbe_mac_82599EB:
|
|
if (type == -1) { /* MISC IVAR */
|
|
index = (entry & 1) * 8;
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR_MISC);
|
|
ivar &= ~(0xFF << index);
|
|
ivar |= (vector << index);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IVAR_MISC, ivar);
|
|
} else { /* RX/TX IVARS */
|
|
index = (16 * (entry & 1)) + (8 * type);
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(entry >> 1));
|
|
ivar &= ~(0xFF << index);
|
|
ivar |= (vector << index);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IVAR(entry >> 1), ivar);
|
|
}
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixgbe_configure_ivars(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++)
|
|
ixgbe_set_ivar(adapter, i, rxr->msix, 0);
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++)
|
|
ixgbe_set_ivar(adapter, i, txr->msix, 1);
|
|
|
|
/* For the Link interrupt */
|
|
ixgbe_set_ivar(adapter, 1, adapter->linkvec, -1);
|
|
}
|
|
|
|
/*
|
|
** ixgbe_sfp_probe - called in the local timer to
|
|
** determine if a port had optics inserted.
|
|
*/
|
|
static bool ixgbe_sfp_probe(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = adapter->dev;
|
|
bool result = FALSE;
|
|
|
|
if ((hw->phy.type == ixgbe_phy_nl) &&
|
|
(hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
|
|
s32 ret = hw->phy.ops.identify_sfp(hw);
|
|
if (ret)
|
|
goto out;
|
|
ret = hw->phy.ops.reset(hw);
|
|
if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,"Unsupported SFP+ module detected!");
|
|
printf(" Reload driver with supported module.\n");
|
|
adapter->sfp_probe = FALSE;
|
|
goto out;
|
|
} else
|
|
device_printf(dev,"SFP+ module detected!\n");
|
|
/* We now have supported optics */
|
|
adapter->sfp_probe = FALSE;
|
|
result = TRUE;
|
|
}
|
|
out:
|
|
return (result);
|
|
}
|
|
|
|
/*
|
|
** Tasklet handler for MSIX Link interrupts
|
|
** - do outside interrupt since it might sleep
|
|
*/
|
|
static void
|
|
ixgbe_handle_link(void *context, int pending)
|
|
{
|
|
struct adapter *adapter = context;
|
|
|
|
ixgbe_check_link(&adapter->hw,
|
|
&adapter->link_speed, &adapter->link_up, 0);
|
|
ixgbe_update_link_status(adapter);
|
|
}
|
|
|
|
/*
|
|
** Tasklet for handling SFP module interrupts
|
|
*/
|
|
static void
|
|
ixgbe_handle_mod(void *context, int pending)
|
|
{
|
|
struct adapter *adapter = context;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = adapter->dev;
|
|
u32 err;
|
|
|
|
err = hw->phy.ops.identify_sfp(hw);
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,
|
|
"Unsupported SFP+ module type was detected.\n");
|
|
return;
|
|
}
|
|
hw->mac.ops.setup_sfp(hw);
|
|
taskqueue_enqueue(adapter->tq, &adapter->msf_task);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
** Tasklet for handling MSF (multispeed fiber) interrupts
|
|
*/
|
|
static void
|
|
ixgbe_handle_msf(void *context, int pending)
|
|
{
|
|
struct adapter *adapter = context;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 autoneg;
|
|
|
|
if (hw->mac.ops.get_link_capabilities)
|
|
hw->mac.ops.get_link_capabilities(hw, &autoneg,
|
|
&hw->mac.autoneg);
|
|
if (hw->mac.ops.setup_link_speed)
|
|
hw->mac.ops.setup_link_speed(hw, autoneg, TRUE, TRUE);
|
|
ixgbe_check_link(&adapter->hw,
|
|
&adapter->link_speed, &adapter->link_up, 0);
|
|
ixgbe_update_link_status(adapter);
|
|
return;
|
|
}
|
|
|
|
/**********************************************************************
|
|
*
|
|
* Update the board statistics counters.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_update_stats_counters(struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp = adapter->ifp;;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 missed_rx = 0, bprc, lxon, lxoff, total;
|
|
u64 total_missed_rx = 0;
|
|
|
|
adapter->stats.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
|
|
|
|
for (int i = 0; i < 8; i++) {
|
|
u32 mp;
|
|
mp = IXGBE_READ_REG(hw, IXGBE_MPC(i));
|
|
/* missed_rx tallies misses for the gprc workaround */
|
|
missed_rx += mp;
|
|
adapter->stats.mpc[i] += mp;
|
|
/* Running comprehensive total for stats display */
|
|
total_missed_rx += adapter->stats.mpc[i];
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
adapter->stats.rnbc[i] +=
|
|
IXGBE_READ_REG(hw, IXGBE_RNBC(i));
|
|
}
|
|
|
|
/* Hardware workaround, gprc counts missed packets */
|
|
adapter->stats.gprc += IXGBE_READ_REG(hw, IXGBE_GPRC);
|
|
adapter->stats.gprc -= missed_rx;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
|
|
IXGBE_READ_REG(hw, IXGBE_GORCH); /* clears register */
|
|
adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
|
|
IXGBE_READ_REG(hw, IXGBE_GOTCH); /* clears register */
|
|
adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORL);
|
|
IXGBE_READ_REG(hw, IXGBE_TORH); /* clears register */
|
|
adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
|
|
adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
|
|
} else {
|
|
adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
|
|
adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
|
|
/* 82598 only has a counter in the high register */
|
|
adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCH);
|
|
adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
|
|
adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORH);
|
|
}
|
|
|
|
/*
|
|
* Workaround: mprc hardware is incorrectly counting
|
|
* broadcasts, so for now we subtract those.
|
|
*/
|
|
bprc = IXGBE_READ_REG(hw, IXGBE_BPRC);
|
|
adapter->stats.bprc += bprc;
|
|
adapter->stats.mprc += IXGBE_READ_REG(hw, IXGBE_MPRC);
|
|
adapter->stats.mprc -= bprc;
|
|
|
|
adapter->stats.roc += IXGBE_READ_REG(hw, IXGBE_ROC);
|
|
adapter->stats.prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64);
|
|
adapter->stats.prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127);
|
|
adapter->stats.prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255);
|
|
adapter->stats.prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511);
|
|
adapter->stats.prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023);
|
|
adapter->stats.prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522);
|
|
adapter->stats.rlec += IXGBE_READ_REG(hw, IXGBE_RLEC);
|
|
|
|
lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC);
|
|
adapter->stats.lxontxc += lxon;
|
|
lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
|
|
adapter->stats.lxofftxc += lxoff;
|
|
total = lxon + lxoff;
|
|
|
|
adapter->stats.gptc += IXGBE_READ_REG(hw, IXGBE_GPTC);
|
|
adapter->stats.mptc += IXGBE_READ_REG(hw, IXGBE_MPTC);
|
|
adapter->stats.ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64);
|
|
adapter->stats.gptc -= total;
|
|
adapter->stats.mptc -= total;
|
|
adapter->stats.ptc64 -= total;
|
|
adapter->stats.gotc -= total * ETHER_MIN_LEN;
|
|
|
|
adapter->stats.ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
|
|
adapter->stats.rfc += IXGBE_READ_REG(hw, IXGBE_RFC);
|
|
adapter->stats.rjc += IXGBE_READ_REG(hw, IXGBE_RJC);
|
|
adapter->stats.tpr += IXGBE_READ_REG(hw, IXGBE_TPR);
|
|
adapter->stats.ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127);
|
|
adapter->stats.ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255);
|
|
adapter->stats.ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511);
|
|
adapter->stats.ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023);
|
|
adapter->stats.ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522);
|
|
adapter->stats.bptc += IXGBE_READ_REG(hw, IXGBE_BPTC);
|
|
|
|
|
|
/* Fill out the OS statistics structure */
|
|
ifp->if_ipackets = adapter->stats.gprc;
|
|
ifp->if_opackets = adapter->stats.gptc;
|
|
ifp->if_ibytes = adapter->stats.gorc;
|
|
ifp->if_obytes = adapter->stats.gotc;
|
|
ifp->if_imcasts = adapter->stats.mprc;
|
|
ifp->if_collisions = 0;
|
|
|
|
/* Rx Errors */
|
|
ifp->if_ierrors = total_missed_rx + adapter->stats.crcerrs +
|
|
adapter->stats.rlec;
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
*
|
|
* This routine is called only when ixgbe_display_debug_stats is enabled.
|
|
* This routine provides a way to take a look at important statistics
|
|
* maintained by the driver and hardware.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_print_hw_stats(struct adapter * adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
|
|
|
|
device_printf(dev,"Std Mbuf Failed = %lu\n",
|
|
adapter->mbuf_defrag_failed);
|
|
device_printf(dev,"Missed Packets = %llu\n",
|
|
(long long)adapter->stats.mpc[0]);
|
|
device_printf(dev,"Receive length errors = %llu\n",
|
|
((long long)adapter->stats.roc +
|
|
(long long)adapter->stats.ruc));
|
|
device_printf(dev,"Crc errors = %llu\n",
|
|
(long long)adapter->stats.crcerrs);
|
|
device_printf(dev,"Driver dropped packets = %lu\n",
|
|
adapter->dropped_pkts);
|
|
device_printf(dev, "watchdog timeouts = %ld\n",
|
|
adapter->watchdog_events);
|
|
|
|
device_printf(dev,"XON Rcvd = %llu\n",
|
|
(long long)adapter->stats.lxonrxc);
|
|
device_printf(dev,"XON Xmtd = %llu\n",
|
|
(long long)adapter->stats.lxontxc);
|
|
device_printf(dev,"XOFF Rcvd = %llu\n",
|
|
(long long)adapter->stats.lxoffrxc);
|
|
device_printf(dev,"XOFF Xmtd = %llu\n",
|
|
(long long)adapter->stats.lxofftxc);
|
|
|
|
device_printf(dev,"Total Packets Rcvd = %llu\n",
|
|
(long long)adapter->stats.tpr);
|
|
device_printf(dev,"Good Packets Rcvd = %llu\n",
|
|
(long long)adapter->stats.gprc);
|
|
device_printf(dev,"Good Packets Xmtd = %llu\n",
|
|
(long long)adapter->stats.gptc);
|
|
device_printf(dev,"TSO Transmissions = %lu\n",
|
|
adapter->tso_tx);
|
|
|
|
return;
|
|
}
|
|
|
|
/**********************************************************************
|
|
*
|
|
* This routine is called only when em_display_debug_stats is enabled.
|
|
* This routine provides a way to take a look at important statistics
|
|
* maintained by the driver and hardware.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_print_debug_info(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
device_printf(dev,"Error Byte Count = %u \n",
|
|
IXGBE_READ_REG(hw, IXGBE_ERRBC));
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
device_printf(dev,"Queue[%d]: rdh = %d, hw rdt = %d\n",
|
|
i, IXGBE_READ_REG(hw, IXGBE_RDH(i)),
|
|
IXGBE_READ_REG(hw, IXGBE_RDT(i)));
|
|
device_printf(dev,"RX(%d) Packets Received: %lld\n",
|
|
rxr->me, (long long)rxr->rx_packets);
|
|
device_printf(dev,"RX(%d) Split RX Packets: %lld\n",
|
|
rxr->me, (long long)rxr->rx_split_packets);
|
|
device_printf(dev,"RX(%d) Bytes Received: %lu\n",
|
|
rxr->me, (long)rxr->rx_bytes);
|
|
device_printf(dev,"RX(%d) IRQ Handled: %lu\n",
|
|
rxr->me, (long)rxr->rx_irq);
|
|
device_printf(dev,"RX(%d) LRO Queued= %d\n",
|
|
rxr->me, lro->lro_queued);
|
|
device_printf(dev,"RX(%d) LRO Flushed= %d\n",
|
|
rxr->me, lro->lro_flushed);
|
|
}
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
device_printf(dev,"Queue(%d) tdh = %d, hw tdt = %d\n", i,
|
|
IXGBE_READ_REG(hw, IXGBE_TDH(i)),
|
|
IXGBE_READ_REG(hw, IXGBE_TDT(i)));
|
|
device_printf(dev,"TX(%d) Packets Sent: %lu\n",
|
|
txr->me, (long)txr->total_packets);
|
|
device_printf(dev,"TX(%d) IRQ Handled: %lu\n",
|
|
txr->me, (long)txr->tx_irq);
|
|
device_printf(dev,"TX(%d) NO Desc Avail: %lu\n",
|
|
txr->me, (long)txr->no_tx_desc_avail);
|
|
}
|
|
|
|
device_printf(dev,"Link IRQ Handled: %lu\n",
|
|
(long)adapter->link_irq);
|
|
return;
|
|
}
|
|
|
|
static int
|
|
ixgbe_sysctl_stats(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct adapter *adapter;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
adapter = (struct adapter *) arg1;
|
|
ixgbe_print_hw_stats(adapter);
|
|
}
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
ixgbe_sysctl_debug(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error, result;
|
|
struct adapter *adapter;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
adapter = (struct adapter *) arg1;
|
|
ixgbe_print_debug_info(adapter);
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
** Set flow control using sysctl:
|
|
** Flow control values:
|
|
** 0 - off
|
|
** 1 - rx pause
|
|
** 2 - tx pause
|
|
** 3 - full
|
|
*/
|
|
static int
|
|
ixgbe_set_flowcntl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
struct adapter *adapter;
|
|
|
|
error = sysctl_handle_int(oidp, &ixgbe_flow_control, 0, req);
|
|
|
|
if (error)
|
|
return (error);
|
|
|
|
adapter = (struct adapter *) arg1;
|
|
switch (ixgbe_flow_control) {
|
|
case ixgbe_fc_rx_pause:
|
|
case ixgbe_fc_tx_pause:
|
|
case ixgbe_fc_full:
|
|
adapter->hw.fc.requested_mode = ixgbe_flow_control;
|
|
break;
|
|
case ixgbe_fc_none:
|
|
default:
|
|
adapter->hw.fc.requested_mode = ixgbe_fc_none;
|
|
}
|
|
|
|
ixgbe_fc_enable(&adapter->hw, 0);
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
ixgbe_add_rx_process_limit(struct adapter *adapter, const char *name,
|
|
const char *description, int *limit, int value)
|
|
{
|
|
*limit = value;
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(adapter->dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(adapter->dev)),
|
|
OID_AUTO, name, CTLTYPE_INT|CTLFLAG_RW, limit, value, description);
|
|
}
|
|
|
|
#ifdef IXGBE_IEEE1588
|
|
|
|
/*
|
|
** ixgbe_hwtstamp_ioctl - control hardware time stamping
|
|
**
|
|
** Outgoing time stamping can be enabled and disabled. Play nice and
|
|
** disable it when requested, although it shouldn't case any overhead
|
|
** when no packet needs it. At most one packet in the queue may be
|
|
** marked for time stamping, otherwise it would be impossible to tell
|
|
** for sure to which packet the hardware time stamp belongs.
|
|
**
|
|
** Incoming time stamping has to be configured via the hardware
|
|
** filters. Not all combinations are supported, in particular event
|
|
** type has to be specified. Matching the kind of event packet is
|
|
** not supported, with the exception of "all V2 events regardless of
|
|
** level 2 or 4".
|
|
**
|
|
*/
|
|
static int
|
|
ixgbe_hwtstamp_ioctl(struct adapter *adapter, struct ifreq *ifr)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct hwtstamp_ctrl *config;
|
|
u32 tsync_tx_ctl_bit = IXGBE_TSYNCTXCTL_ENABLED;
|
|
u32 tsync_rx_ctl_bit = IXGBE_TSYNCRXCTL_ENABLED;
|
|
u32 tsync_rx_ctl_type = 0;
|
|
u32 tsync_rx_cfg = 0;
|
|
int is_l4 = 0;
|
|
int is_l2 = 0;
|
|
u16 port = 319; /* PTP */
|
|
u32 regval;
|
|
|
|
config = (struct hwtstamp_ctrl *) ifr->ifr_data;
|
|
|
|
/* reserved for future extensions */
|
|
if (config->flags)
|
|
return (EINVAL);
|
|
|
|
switch (config->tx_type) {
|
|
case HWTSTAMP_TX_OFF:
|
|
tsync_tx_ctl_bit = 0;
|
|
break;
|
|
case HWTSTAMP_TX_ON:
|
|
tsync_tx_ctl_bit = IXGBE_TSYNCTXCTL_ENABLED;
|
|
break;
|
|
default:
|
|
return (ERANGE);
|
|
}
|
|
|
|
switch (config->rx_filter) {
|
|
case HWTSTAMP_FILTER_NONE:
|
|
tsync_rx_ctl_bit = 0;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
|
|
case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
|
|
case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
|
|
case HWTSTAMP_FILTER_ALL:
|
|
/*
|
|
* register TSYNCRXCFG must be set, therefore it is not
|
|
* possible to time stamp both Sync and Delay_Req messages
|
|
* => fall back to time stamping all packets
|
|
*/
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_ALL;
|
|
config->rx_filter = HWTSTAMP_FILTER_ALL;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_L4_V1;
|
|
tsync_rx_cfg = IXGBE_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE;
|
|
is_l4 = 1;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_L4_V1;
|
|
tsync_rx_cfg = IXGBE_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE;
|
|
is_l4 = 1;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
|
|
case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2;
|
|
tsync_rx_cfg = IXGBE_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE;
|
|
is_l2 = 1;
|
|
is_l4 = 1;
|
|
config->rx_filter = HWTSTAMP_FILTER_SOME;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
|
|
case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2;
|
|
tsync_rx_cfg = IXGBE_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE;
|
|
is_l2 = 1;
|
|
is_l4 = 1;
|
|
config->rx_filter = HWTSTAMP_FILTER_SOME;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V2_EVENT:
|
|
case HWTSTAMP_FILTER_PTP_V2_SYNC:
|
|
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_EVENT_V2;
|
|
config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
|
|
is_l2 = 1;
|
|
break;
|
|
default:
|
|
return -ERANGE;
|
|
}
|
|
|
|
/* enable/disable TX */
|
|
regval = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL);
|
|
regval = (regval & ~IXGBE_TSYNCTXCTL_ENABLED) | tsync_tx_ctl_bit;
|
|
IXGBE_WRITE_REG(hw, IXGBE_TSYNCTXCTL, regval);
|
|
|
|
/* enable/disable RX, define which PTP packets are time stamped */
|
|
regval = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL);
|
|
regval = (regval & ~IXGBE_TSYNCRXCTL_ENABLED) | tsync_rx_ctl_bit;
|
|
regval = (regval & ~0xE) | tsync_rx_ctl_type;
|
|
IXGBE_WRITE_REG(hw, IXGBE_TSYNCRXCTL, regval);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TSYNCRXCFG, tsync_rx_cfg);
|
|
|
|
/*
|
|
* Ethertype Filter Queue Filter[0][15:0] = 0x88F7
|
|
* (Ethertype to filter on)
|
|
* Ethertype Filter Queue Filter[0][26] = 0x1 (Enable filter)
|
|
* Ethertype Filter Queue Filter[0][30] = 0x1 (Enable Timestamping)
|
|
*/
|
|
IXGBE_WRITE_REG(hw, IXGBE_ETQF0, is_l2 ? 0x440088f7 : 0);
|
|
|
|
/* L4 Queue Filter[0]: only filter by source and destination port */
|
|
IXGBE_WRITE_REG(hw, IXGBE_SPQF0, htons(port));
|
|
IXGBE_WRITE_REG(hw, IXGBE_IMIREXT(0), is_l4 ?
|
|
((1<<12) | (1<<19) /* bypass size and control flags */) : 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IMIR(0), is_l4 ?
|
|
(htons(port)
|
|
| (0<<16) /* immediate interrupt disabled */
|
|
| 0 /* (1<<17) bit cleared: do not bypass
|
|
destination port check */)
|
|
: 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_FTQF0, is_l4 ?
|
|
(0x11 /* UDP */
|
|
| (1<<15) /* VF not compared */
|
|
| (1<<27) /* Enable Timestamping */
|
|
| (7<<28) /* only source port filter enabled,
|
|
source/target address and protocol
|
|
masked */)
|
|
: ((1<<15) | (15<<28) /* all mask bits set = filter not
|
|
enabled */));
|
|
|
|
wrfl();
|
|
|
|
adapter->hwtstamp_ctrl = config;
|
|
|
|
/* clear TX/RX time stamp registers, just to be sure */
|
|
regval = IXGBE_READ_REG(hw, IXGBE_TXSTMPH);
|
|
regval = IXGBE_READ_REG(hw, IXGBE_RXSTMPH);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
** ixgbe_read_clock - read raw cycle counter (to be used by time counter)
|
|
*/
|
|
static cycle_t ixgbe_read_clock(const struct cyclecounter *tc)
|
|
{
|
|
struct adapter *adapter =
|
|
container_of(tc, struct igb_adapter, cycles);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 stamp;
|
|
|
|
stamp = IXGBE_READ_REG(hw, IXGBE_SYSTIML);
|
|
stamp |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32ULL;
|
|
|
|
return (stamp);
|
|
}
|
|
|
|
#endif /* IXGBE_IEEE1588 */
|