d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0987c184a1
freebsd-nq/sys/dev/ffec/if_ffec.c
Ian Lepore e56e554106 Add busdma sync ops before reading and after modifying the descriptor rings. 
This was previously working by accident because BUSDMA_COHERENT_MEMORY has
always been set to strongly-ordered on arm.  Now we're moving towards
normal-uncacheable (what might be called write-combining on other platforms)
and using the proper sync ops will be more important.  Of course, that
opens the question of just what is the "proper" sync op for shared
concurrent dma access as opposed to accesses where the handoff of control
of the memory has well-defined sequence points that match the available
busdma sync operations.
2014-11-24 16:12:11 +00:00

1773 lines
47 KiB
C
Raw Blame History

/*-
* Copyright (c) 2013 Ian Lepore <ian@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for Freescale Fast Ethernet Controller, found on imx-series SoCs among
* others. Also works for the ENET Gigibit controller found on imx6 and imx28,
* but the driver doesn't currently use any of the ENET advanced features other
* than enabling gigabit.
*
* The interface name 'fec' is already taken by netgraph's Fast Etherchannel
* (netgraph/ng_fec.c), so we use 'ffec'.
*
* Requires an FDT entry with at least these properties:
* fec: ethernet@02188000 {
* compatible = "fsl,imxNN-fec";
* reg = <0x02188000 0x4000>;
* interrupts = <150 151>;
* phy-mode = "rgmii";
* phy-disable-preamble; // optional
* };
* The second interrupt number is for IEEE-1588, and is not currently used; it
* need not be present. phy-mode must be one of: "mii", "rmii", "rgmii".
* There is also an optional property, phy-disable-preamble, which if present
* will disable the preamble bits, cutting the size of each mdio transaction
* (and thus the busy-wait time) in half.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/rman.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <machine/bus.h>
#include <net/bpf.h>
#include <net/if.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/if_var.h>
#include <net/if_vlan_var.h>
#include <dev/ffec/if_ffecreg.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miibus_if.h"
/*
* There are small differences in the hardware on various SoCs. Not every SoC
* we support has its own FECTYPE; most work as GENERIC and only the ones that
* need different handling get their own entry. In addition to the types in
* this list, there are some flags below that can be ORed into the upper bits.
*/
enum {
FECTYPE_NONE,
FECTYPE_GENERIC,
FECTYPE_IMX53,
FECTYPE_IMX6,
FECTYPE_MVF,
};
/*
* Flags that describe general differences between the FEC hardware in various
* SoCs. These are ORed into the FECTYPE enum values.
*/
#define FECTYPE_MASK 0x0000ffff
#define FECFLAG_GBE (0x0001 << 16)
/*
* Table of supported FDT compat strings and their associated FECTYPE values.
*/
static struct ofw_compat_data compat_data[] = {
{"fsl,imx51-fec", FECTYPE_GENERIC},
{"fsl,imx53-fec", FECTYPE_IMX53},
{"fsl,imx6q-fec", FECTYPE_IMX6 | FECFLAG_GBE},
{"fsl,mvf600-fec", FECTYPE_MVF},
{"fsl,mvf-fec", FECTYPE_MVF},
{NULL, FECTYPE_NONE},
};
/*
* Driver data and defines.
*/
#define RX_DESC_COUNT 64
#define RX_DESC_SIZE (sizeof(struct ffec_hwdesc) * RX_DESC_COUNT)
#define TX_DESC_COUNT 64
#define TX_DESC_SIZE (sizeof(struct ffec_hwdesc) * TX_DESC_COUNT)
#define WATCHDOG_TIMEOUT_SECS 5
#define STATS_HARVEST_INTERVAL 3
struct ffec_bufmap {
struct mbuf *mbuf;
bus_dmamap_t map;
};
enum {
PHY_CONN_UNKNOWN,
PHY_CONN_MII,
PHY_CONN_RMII,
PHY_CONN_RGMII
};
struct ffec_softc {
device_t dev;
device_t miibus;
struct mii_data * mii_softc;
struct ifnet *ifp;
int if_flags;
struct mtx mtx;
struct resource *irq_res;
struct resource *mem_res;
void * intr_cookie;
struct callout ffec_callout;
uint8_t phy_conn_type;
uint8_t fectype;
boolean_t link_is_up;
boolean_t is_attached;
boolean_t is_detaching;
int tx_watchdog_count;
int stats_harvest_count;
bus_dma_tag_t rxdesc_tag;
bus_dmamap_t rxdesc_map;
struct ffec_hwdesc *rxdesc_ring;
bus_addr_t rxdesc_ring_paddr;
bus_dma_tag_t rxbuf_tag;
struct ffec_bufmap rxbuf_map[RX_DESC_COUNT];
uint32_t rx_idx;
bus_dma_tag_t txdesc_tag;
bus_dmamap_t txdesc_map;
struct ffec_hwdesc *txdesc_ring;
bus_addr_t txdesc_ring_paddr;
bus_dma_tag_t txbuf_tag;
struct ffec_bufmap txbuf_map[RX_DESC_COUNT];
uint32_t tx_idx_head;
uint32_t tx_idx_tail;
int txcount;
};
#define FFEC_LOCK(sc) mtx_lock(&(sc)->mtx)
#define FFEC_UNLOCK(sc) mtx_unlock(&(sc)->mtx)
#define FFEC_LOCK_INIT(sc) mtx_init(&(sc)->mtx, \
device_get_nameunit((sc)->dev), MTX_NETWORK_LOCK, MTX_DEF)
#define FFEC_LOCK_DESTROY(sc) mtx_destroy(&(sc)->mtx);
#define FFEC_ASSERT_LOCKED(sc) mtx_assert(&(sc)->mtx, MA_OWNED);
#define FFEC_ASSERT_UNLOCKED(sc) mtx_assert(&(sc)->mtx, MA_NOTOWNED);
static void ffec_init_locked(struct ffec_softc *sc);
static void ffec_stop_locked(struct ffec_softc *sc);
static void ffec_txstart_locked(struct ffec_softc *sc);
static void ffec_txfinish_locked(struct ffec_softc *sc);
static inline uint16_t
RD2(struct ffec_softc *sc, bus_size_t off)
{
return (bus_read_2(sc->mem_res, off));
}
static inline void
WR2(struct ffec_softc *sc, bus_size_t off, uint16_t val)
{
bus_write_2(sc->mem_res, off, val);
}
static inline uint32_t
RD4(struct ffec_softc *sc, bus_size_t off)
{
return (bus_read_4(sc->mem_res, off));
}
static inline void
WR4(struct ffec_softc *sc, bus_size_t off, uint32_t val)
{
bus_write_4(sc->mem_res, off, val);
}
static inline uint32_t
next_rxidx(struct ffec_softc *sc, uint32_t curidx)
{
return ((curidx == RX_DESC_COUNT - 1) ? 0 : curidx + 1);
}
static inline uint32_t
next_txidx(struct ffec_softc *sc, uint32_t curidx)
{
return ((curidx == TX_DESC_COUNT - 1) ? 0 : curidx + 1);
}
static void
ffec_get1paddr(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
if (error != 0)
return;
*(bus_addr_t *)arg = segs[0].ds_addr;
}
static void
ffec_miigasket_setup(struct ffec_softc *sc)
{
uint32_t ifmode;
/*
* We only need the gasket for MII and RMII connections on certain SoCs.
*/
switch (sc->fectype & FECTYPE_MASK)
{
case FECTYPE_IMX53:
break;
default:
return;
}
switch (sc->phy_conn_type)
{
case PHY_CONN_MII:
ifmode = 0;
break;
case PHY_CONN_RMII:
ifmode = FEC_MIIGSK_CFGR_IF_MODE_RMII;
break;
default:
return;
}
/*
* Disable the gasket, configure for either MII or RMII, then enable.
*/
WR2(sc, FEC_MIIGSK_ENR, 0);
while (RD2(sc, FEC_MIIGSK_ENR) & FEC_MIIGSK_ENR_READY)
continue;
WR2(sc, FEC_MIIGSK_CFGR, ifmode);
WR2(sc, FEC_MIIGSK_ENR, FEC_MIIGSK_ENR_EN);
while (!(RD2(sc, FEC_MIIGSK_ENR) & FEC_MIIGSK_ENR_READY))
continue;
}
static boolean_t
ffec_miibus_iowait(struct ffec_softc *sc)
{
uint32_t timeout;
for (timeout = 10000; timeout != 0; --timeout)
if (RD4(sc, FEC_IER_REG) & FEC_IER_MII)
return (true);
return (false);
}
static int
ffec_miibus_readreg(device_t dev, int phy, int reg)
{
struct ffec_softc *sc;
int val;
sc = device_get_softc(dev);
WR4(sc, FEC_IER_REG, FEC_IER_MII);
WR4(sc, FEC_MMFR_REG, FEC_MMFR_OP_READ |
FEC_MMFR_ST_VALUE | FEC_MMFR_TA_VALUE |
((phy << FEC_MMFR_PA_SHIFT) & FEC_MMFR_PA_MASK) |
((reg << FEC_MMFR_RA_SHIFT) & FEC_MMFR_RA_MASK));
if (!ffec_miibus_iowait(sc)) {
device_printf(dev, "timeout waiting for mii read\n");
return (-1); /* All-ones is a symptom of bad mdio. */
}
val = RD4(sc, FEC_MMFR_REG) & FEC_MMFR_DATA_MASK;
return (val);
}
static int
ffec_miibus_writereg(device_t dev, int phy, int reg, int val)
{
struct ffec_softc *sc;
sc = device_get_softc(dev);
WR4(sc, FEC_IER_REG, FEC_IER_MII);
WR4(sc, FEC_MMFR_REG, FEC_MMFR_OP_WRITE |
FEC_MMFR_ST_VALUE | FEC_MMFR_TA_VALUE |
((phy << FEC_MMFR_PA_SHIFT) & FEC_MMFR_PA_MASK) |
((reg << FEC_MMFR_RA_SHIFT) & FEC_MMFR_RA_MASK) |
(val & FEC_MMFR_DATA_MASK));
if (!ffec_miibus_iowait(sc)) {
device_printf(dev, "timeout waiting for mii write\n");
return (-1);
}
return (0);
}
static void
ffec_miibus_statchg(device_t dev)
{
struct ffec_softc *sc;
struct mii_data *mii;
uint32_t ecr, rcr, tcr;
/*
* Called by the MII bus driver when the PHY establishes link to set the
* MAC interface registers.
*/
sc = device_get_softc(dev);
FFEC_ASSERT_LOCKED(sc);
mii = sc->mii_softc;
if (mii->mii_media_status & IFM_ACTIVE)
sc->link_is_up = true;
else
sc->link_is_up = false;
ecr = RD4(sc, FEC_ECR_REG) & ~FEC_ECR_SPEED;
rcr = RD4(sc, FEC_RCR_REG) & ~(FEC_RCR_RMII_10T | FEC_RCR_RMII_MODE |
FEC_RCR_RGMII_EN | FEC_RCR_DRT | FEC_RCR_FCE);
tcr = RD4(sc, FEC_TCR_REG) & ~FEC_TCR_FDEN;
rcr |= FEC_RCR_MII_MODE; /* Must always be on even for R[G]MII. */
switch (sc->phy_conn_type) {
case PHY_CONN_MII:
break;
case PHY_CONN_RMII:
rcr |= FEC_RCR_RMII_MODE;
break;
case PHY_CONN_RGMII:
rcr |= FEC_RCR_RGMII_EN;
break;
}
switch (IFM_SUBTYPE(mii->mii_media_active)) {
case IFM_1000_T:
case IFM_1000_SX:
ecr |= FEC_ECR_SPEED;
break;
case IFM_100_TX:
/* Not-FEC_ECR_SPEED + not-FEC_RCR_RMII_10T means 100TX */
break;
case IFM_10_T:
rcr |= FEC_RCR_RMII_10T;
break;
case IFM_NONE:
sc->link_is_up = false;
return;
default:
sc->link_is_up = false;
device_printf(dev, "Unsupported media %u\n",
IFM_SUBTYPE(mii->mii_media_active));
return;
}
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FDX) != 0)
tcr |= FEC_TCR_FDEN;
else
rcr |= FEC_RCR_DRT;
if ((IFM_OPTIONS(mii->mii_media_active) & IFM_FLOW) != 0)
rcr |= FEC_RCR_FCE;
WR4(sc, FEC_RCR_REG, rcr);
WR4(sc, FEC_TCR_REG, tcr);
WR4(sc, FEC_ECR_REG, ecr);
}
static void
ffec_media_status(struct ifnet * ifp, struct ifmediareq *ifmr)
{
struct ffec_softc *sc;
struct mii_data *mii;
sc = ifp->if_softc;
mii = sc->mii_softc;
FFEC_LOCK(sc);
mii_pollstat(mii);
ifmr->ifm_active = mii->mii_media_active;
ifmr->ifm_status = mii->mii_media_status;
FFEC_UNLOCK(sc);
}
static int
ffec_media_change_locked(struct ffec_softc *sc)
{
return (mii_mediachg(sc->mii_softc));
}
static int
ffec_media_change(struct ifnet * ifp)
{
struct ffec_softc *sc;
int error;
sc = ifp->if_softc;
FFEC_LOCK(sc);
error = ffec_media_change_locked(sc);
FFEC_UNLOCK(sc);
return (error);
}
static void ffec_clear_stats(struct ffec_softc *sc)
{
WR4(sc, FEC_RMON_R_PACKETS, 0);
WR4(sc, FEC_RMON_R_MC_PKT, 0);
WR4(sc, FEC_RMON_R_CRC_ALIGN, 0);
WR4(sc, FEC_RMON_R_UNDERSIZE, 0);
WR4(sc, FEC_RMON_R_OVERSIZE, 0);
WR4(sc, FEC_RMON_R_FRAG, 0);
WR4(sc, FEC_RMON_R_JAB, 0);
WR4(sc, FEC_RMON_T_PACKETS, 0);
WR4(sc, FEC_RMON_T_MC_PKT, 0);
WR4(sc, FEC_RMON_T_CRC_ALIGN, 0);
WR4(sc, FEC_RMON_T_UNDERSIZE, 0);
WR4(sc, FEC_RMON_T_OVERSIZE , 0);
WR4(sc, FEC_RMON_T_FRAG, 0);
WR4(sc, FEC_RMON_T_JAB, 0);
WR4(sc, FEC_RMON_T_COL, 0);
}
static void
ffec_harvest_stats(struct ffec_softc *sc)
{
struct ifnet *ifp;
/* We don't need to harvest too often. */
if (++sc->stats_harvest_count < STATS_HARVEST_INTERVAL)
return;
/*
* Try to avoid harvesting unless the IDLE flag is on, but if it has
* been too long just go ahead and do it anyway, the worst that'll
* happen is we'll lose a packet count or two as we clear at the end.
*/
if (sc->stats_harvest_count < (2 * STATS_HARVEST_INTERVAL) &&
((RD4(sc, FEC_MIBC_REG) & FEC_MIBC_IDLE) == 0))
return;
sc->stats_harvest_count = 0;
ifp = sc->ifp;
if_inc_counter(ifp, IFCOUNTER_IPACKETS, RD4(sc, FEC_RMON_R_PACKETS));
if_inc_counter(ifp, IFCOUNTER_IMCASTS, RD4(sc, FEC_RMON_R_MC_PKT));
if_inc_counter(ifp, IFCOUNTER_IERRORS,
RD4(sc, FEC_RMON_R_CRC_ALIGN) + RD4(sc, FEC_RMON_R_UNDERSIZE) +
RD4(sc, FEC_RMON_R_OVERSIZE) + RD4(sc, FEC_RMON_R_FRAG) +
RD4(sc, FEC_RMON_R_JAB));
if_inc_counter(ifp, IFCOUNTER_OPACKETS, RD4(sc, FEC_RMON_T_PACKETS));
if_inc_counter(ifp, IFCOUNTER_OMCASTS, RD4(sc, FEC_RMON_T_MC_PKT));
if_inc_counter(ifp, IFCOUNTER_OERRORS,
RD4(sc, FEC_RMON_T_CRC_ALIGN) + RD4(sc, FEC_RMON_T_UNDERSIZE) +
RD4(sc, FEC_RMON_T_OVERSIZE) + RD4(sc, FEC_RMON_T_FRAG) +
RD4(sc, FEC_RMON_T_JAB));
if_inc_counter(ifp, IFCOUNTER_COLLISIONS, RD4(sc, FEC_RMON_T_COL));
ffec_clear_stats(sc);
}
static void
ffec_tick(void *arg)
{
struct ffec_softc *sc;
struct ifnet *ifp;
int link_was_up;
sc = arg;
FFEC_ASSERT_LOCKED(sc);
ifp = sc->ifp;
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING))
return;
/*
* Typical tx watchdog. If this fires it indicates that we enqueued
* packets for output and never got a txdone interrupt for them. Maybe
* it's a missed interrupt somehow, just pretend we got one.
*/
if (sc->tx_watchdog_count > 0) {
if (--sc->tx_watchdog_count == 0) {
ffec_txfinish_locked(sc);
}
}
/* Gather stats from hardware counters. */
ffec_harvest_stats(sc);
/* Check the media status. */
link_was_up = sc->link_is_up;
mii_tick(sc->mii_softc);
if (sc->link_is_up && !link_was_up)
ffec_txstart_locked(sc);
/* Schedule another check one second from now. */
callout_reset(&sc->ffec_callout, hz, ffec_tick, sc);
}
inline static uint32_t
ffec_setup_txdesc(struct ffec_softc *sc, int idx, bus_addr_t paddr,
uint32_t len)
{
uint32_t nidx;
uint32_t flags;
nidx = next_txidx(sc, idx);
/* Addr/len 0 means we're clearing the descriptor after xmit done. */
if (paddr == 0 || len == 0) {
flags = 0;
--sc->txcount;
} else {
flags = FEC_TXDESC_READY | FEC_TXDESC_L | FEC_TXDESC_TC;
++sc->txcount;
}
if (nidx == 0)
flags |= FEC_TXDESC_WRAP;
/*
* The hardware requires 32-bit physical addresses. We set up the dma
* tag to indicate that, so the cast to uint32_t should never lose
* significant bits.
*/
sc->txdesc_ring[idx].buf_paddr = (uint32_t)paddr;
sc->txdesc_ring[idx].flags_len = flags | len; /* Must be set last! */
return (nidx);
}
static int
ffec_setup_txbuf(struct ffec_softc *sc, int idx, struct mbuf **mp)
{
struct mbuf * m;
int error, nsegs;
struct bus_dma_segment seg;
if ((m = m_defrag(*mp, M_NOWAIT)) == NULL)
return (ENOMEM);
*mp = m;
error = bus_dmamap_load_mbuf_sg(sc->txbuf_tag, sc->txbuf_map[idx].map,
m, &seg, &nsegs, 0);
if (error != 0) {
return (ENOMEM);
}
bus_dmamap_sync(sc->txbuf_tag, sc->txbuf_map[idx].map,
BUS_DMASYNC_PREWRITE);
sc->txbuf_map[idx].mbuf = m;
ffec_setup_txdesc(sc, idx, seg.ds_addr, seg.ds_len);
return (0);
}
static void
ffec_txstart_locked(struct ffec_softc *sc)
{
struct ifnet *ifp;
struct mbuf *m;
int enqueued;
FFEC_ASSERT_LOCKED(sc);
if (!sc->link_is_up)
return;
ifp = sc->ifp;
if (ifp->if_drv_flags & IFF_DRV_OACTIVE)
return;
enqueued = 0;
for (;;) {
if (sc->txcount == (TX_DESC_COUNT-1)) {
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
}
IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
if (m == NULL)
break;
if (ffec_setup_txbuf(sc, sc->tx_idx_head, &m) != 0) {
IFQ_DRV_PREPEND(&ifp->if_snd, m);
break;
}
BPF_MTAP(ifp, m);
sc->tx_idx_head = next_txidx(sc, sc->tx_idx_head);
++enqueued;
}
if (enqueued != 0) {
bus_dmamap_sync(sc->txdesc_tag, sc->txdesc_map, BUS_DMASYNC_PREWRITE);
WR4(sc, FEC_TDAR_REG, FEC_TDAR_TDAR);
bus_dmamap_sync(sc->txdesc_tag, sc->txdesc_map, BUS_DMASYNC_POSTWRITE);
sc->tx_watchdog_count = WATCHDOG_TIMEOUT_SECS;
}
}
static void
ffec_txstart(struct ifnet *ifp)
{
struct ffec_softc *sc = ifp->if_softc;
FFEC_LOCK(sc);
ffec_txstart_locked(sc);
FFEC_UNLOCK(sc);
}
static void
ffec_txfinish_locked(struct ffec_softc *sc)
{
struct ifnet *ifp;
struct ffec_hwdesc *desc;
struct ffec_bufmap *bmap;
boolean_t retired_buffer;
FFEC_ASSERT_LOCKED(sc);
/* XXX Can't set PRE|POST right now, but we need both. */
bus_dmamap_sync(sc->txdesc_tag, sc->txdesc_map, BUS_DMASYNC_PREREAD);
bus_dmamap_sync(sc->txdesc_tag, sc->txdesc_map, BUS_DMASYNC_POSTREAD);
ifp = sc->ifp;
retired_buffer = false;
while (sc->tx_idx_tail != sc->tx_idx_head) {
desc = &sc->txdesc_ring[sc->tx_idx_tail];
if (desc->flags_len & FEC_TXDESC_READY)
break;
retired_buffer = true;
bmap = &sc->txbuf_map[sc->tx_idx_tail];
bus_dmamap_sync(sc->txbuf_tag, bmap->map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->txbuf_tag, bmap->map);
m_freem(bmap->mbuf);
bmap->mbuf = NULL;
ffec_setup_txdesc(sc, sc->tx_idx_tail, 0, 0);
sc->tx_idx_tail = next_txidx(sc, sc->tx_idx_tail);
}
/*
* If we retired any buffers, there will be open tx slots available in
* the descriptor ring, go try to start some new output.
*/
if (retired_buffer) {
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
ffec_txstart_locked(sc);
}
/* If there are no buffers outstanding, muzzle the watchdog. */
if (sc->tx_idx_tail == sc->tx_idx_head) {
sc->tx_watchdog_count = 0;
}
}
inline static uint32_t
ffec_setup_rxdesc(struct ffec_softc *sc, int idx, bus_addr_t paddr)
{
uint32_t nidx;
/*
* The hardware requires 32-bit physical addresses. We set up the dma
* tag to indicate that, so the cast to uint32_t should never lose
* significant bits.
*/
nidx = next_rxidx(sc, idx);
sc->rxdesc_ring[idx].buf_paddr = (uint32_t)paddr;
sc->rxdesc_ring[idx].flags_len = FEC_RXDESC_EMPTY |
((nidx == 0) ? FEC_RXDESC_WRAP : 0);
return (nidx);
}
static int
ffec_setup_rxbuf(struct ffec_softc *sc, int idx, struct mbuf * m)
{
int error, nsegs;
struct bus_dma_segment seg;
/*
* We need to leave at least ETHER_ALIGN bytes free at the beginning of
* the buffer to allow the data to be re-aligned after receiving it (by
* copying it backwards ETHER_ALIGN bytes in the same buffer). We also
* have to ensure that the beginning of the buffer is aligned to the
* hardware's requirements.
*/
m_adj(m, roundup(ETHER_ALIGN, FEC_RXBUF_ALIGN));
error = bus_dmamap_load_mbuf_sg(sc->rxbuf_tag, sc->rxbuf_map[idx].map,
m, &seg, &nsegs, 0);
if (error != 0) {
return (error);
}
bus_dmamap_sync(sc->rxbuf_tag, sc->rxbuf_map[idx].map,
BUS_DMASYNC_PREREAD);
sc->rxbuf_map[idx].mbuf = m;
ffec_setup_rxdesc(sc, idx, seg.ds_addr);
return (0);
}
static struct mbuf *
ffec_alloc_mbufcl(struct ffec_softc *sc)
{
struct mbuf *m;
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
m->m_pkthdr.len = m->m_len = m->m_ext.ext_size;
return (m);
}
static void
ffec_rxfinish_onebuf(struct ffec_softc *sc, int len)
{
struct mbuf *m, *newmbuf;
struct ffec_bufmap *bmap;
uint8_t *dst, *src;
int error;
/*
* First try to get a new mbuf to plug into this slot in the rx ring.
* If that fails, drop the current packet and recycle the current
* mbuf, which is still mapped and loaded.
*/
if ((newmbuf = ffec_alloc_mbufcl(sc)) == NULL) {
if_inc_counter(sc->ifp, IFCOUNTER_IQDROPS, 1);
ffec_setup_rxdesc(sc, sc->rx_idx,
sc->rxdesc_ring[sc->rx_idx].buf_paddr);
return;
}
/*
* Unfortunately, the protocol headers need to be aligned on a 32-bit
* boundary for the upper layers. The hardware requires receive
* buffers to be 16-byte aligned. The ethernet header is 14 bytes,
* leaving the protocol header unaligned. We used m_adj() after
* allocating the buffer to leave empty space at the start of the
* buffer, now we'll use the alignment agnostic bcopy() routine to
* shuffle all the data backwards 2 bytes and adjust m_data.
*
* XXX imx6 hardware is able to do this 2-byte alignment by setting the
* SHIFT16 bit in the RACC register. Older hardware doesn't have that
* feature, but for them could we speed this up by copying just the
* protocol headers into their own small mbuf then chaining the cluster
* to it? That way we'd only need to copy like 64 bytes or whatever
* the biggest header is, instead of the whole 1530ish-byte frame.
*/
FFEC_UNLOCK(sc);
bmap = &sc->rxbuf_map[sc->rx_idx];
len -= ETHER_CRC_LEN;
bus_dmamap_sync(sc->rxbuf_tag, bmap->map, BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->rxbuf_tag, bmap->map);
m = bmap->mbuf;
bmap->mbuf = NULL;
m->m_len = len;
m->m_pkthdr.len = len;
m->m_pkthdr.rcvif = sc->ifp;
src = mtod(m, uint8_t*);
dst = src - ETHER_ALIGN;
bcopy(src, dst, len);
m->m_data = dst;
sc->ifp->if_input(sc->ifp, m);
FFEC_LOCK(sc);
if ((error = ffec_setup_rxbuf(sc, sc->rx_idx, newmbuf)) != 0) {
device_printf(sc->dev, "ffec_setup_rxbuf error %d\n", error);
/* XXX Now what? We've got a hole in the rx ring. */
}
}
static void
ffec_rxfinish_locked(struct ffec_softc *sc)
{
struct ffec_hwdesc *desc;
int len;
boolean_t produced_empty_buffer;
FFEC_ASSERT_LOCKED(sc);
/* XXX Can't set PRE|POST right now, but we need both. */
bus_dmamap_sync(sc->rxdesc_tag, sc->rxdesc_map, BUS_DMASYNC_PREREAD);
bus_dmamap_sync(sc->rxdesc_tag, sc->rxdesc_map, BUS_DMASYNC_POSTREAD);
produced_empty_buffer = false;
for (;;) {
desc = &sc->rxdesc_ring[sc->rx_idx];
if (desc->flags_len & FEC_RXDESC_EMPTY)
break;
produced_empty_buffer = true;
len = (desc->flags_len & FEC_RXDESC_LEN_MASK);
if (len < 64) {
/*
* Just recycle the descriptor and continue. .
*/
ffec_setup_rxdesc(sc, sc->rx_idx,
sc->rxdesc_ring[sc->rx_idx].buf_paddr);
} else if ((desc->flags_len & FEC_RXDESC_L) == 0) {
/*
* The entire frame is not in this buffer. Impossible.
* Recycle the descriptor and continue.
*
* XXX what's the right way to handle this? Probably we
* should stop/init the hardware because this should
* just really never happen when we have buffers bigger
* than the maximum frame size.
*/
device_printf(sc->dev,
"fec_rxfinish: received frame without LAST bit set");
ffec_setup_rxdesc(sc, sc->rx_idx,
sc->rxdesc_ring[sc->rx_idx].buf_paddr);
} else if (desc->flags_len & FEC_RXDESC_ERROR_BITS) {
/*
* Something went wrong with receiving the frame, we
* don't care what (the hardware has counted the error
* in the stats registers already), we just reuse the
* same mbuf, which is still dma-mapped, by resetting
* the rx descriptor.
*/
ffec_setup_rxdesc(sc, sc->rx_idx,
sc->rxdesc_ring[sc->rx_idx].buf_paddr);
} else {
/*
* Normal case: a good frame all in one buffer.
*/
ffec_rxfinish_onebuf(sc, len);
}
sc->rx_idx = next_rxidx(sc, sc->rx_idx);
}
if (produced_empty_buffer) {
bus_dmamap_sync(sc->rxdesc_tag, sc->txdesc_map, BUS_DMASYNC_PREWRITE);
WR4(sc, FEC_RDAR_REG, FEC_RDAR_RDAR);
bus_dmamap_sync(sc->rxdesc_tag, sc->txdesc_map, BUS_DMASYNC_POSTWRITE);
}
}
static void
ffec_get_hwaddr(struct ffec_softc *sc, uint8_t *hwaddr)
{
uint32_t palr, paur, rnd;
/*
* Try to recover a MAC address from the running hardware. If there's
* something non-zero there, assume the bootloader did the right thing
* and just use it.
*
* Otherwise, set the address to a convenient locally assigned address,
* 'bsd' + random 24 low-order bits. 'b' is 0x62, which has the locally
* assigned bit set, and the broadcast/multicast bit clear.
*/
palr = RD4(sc, FEC_PALR_REG);
paur = RD4(sc, FEC_PAUR_REG) & FEC_PAUR_PADDR2_MASK;
if ((palr | paur) != 0) {
hwaddr[0] = palr >> 24;
hwaddr[1] = palr >> 16;
hwaddr[2] = palr >> 8;
hwaddr[3] = palr >> 0;
hwaddr[4] = paur >> 24;
hwaddr[5] = paur >> 16;
} else {
rnd = arc4random() & 0x00ffffff;
hwaddr[0] = 'b';
hwaddr[1] = 's';
hwaddr[2] = 'd';
hwaddr[3] = rnd >> 16;
hwaddr[4] = rnd >> 8;
hwaddr[5] = rnd >> 0;
}
if (bootverbose) {
device_printf(sc->dev,
"MAC address %02x:%02x:%02x:%02x:%02x:%02x:\n",
hwaddr[0], hwaddr[1], hwaddr[2],
hwaddr[3], hwaddr[4], hwaddr[5]);
}
}
static void
ffec_setup_rxfilter(struct ffec_softc *sc)
{
struct ifnet *ifp;
struct ifmultiaddr *ifma;
uint8_t *eaddr;
uint32_t crc;
uint64_t ghash, ihash;
FFEC_ASSERT_LOCKED(sc);
ifp = sc->ifp;
/*
* Set the multicast (group) filter hash.
*/
if ((ifp->if_flags & IFF_ALLMULTI))
ghash = 0xffffffffffffffffLLU;
else {
ghash = 0;
if_maddr_rlock(ifp);
TAILQ_FOREACH(ifma, &sc->ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
/* 6 bits from MSB in LE CRC32 are used for hash. */
crc = ether_crc32_le(LLADDR((struct sockaddr_dl *)
ifma->ifma_addr), ETHER_ADDR_LEN);
ghash |= 1LLU << (((uint8_t *)&crc)[3] >> 2);
}
if_maddr_runlock(ifp);
}
WR4(sc, FEC_GAUR_REG, (uint32_t)(ghash >> 32));
WR4(sc, FEC_GALR_REG, (uint32_t)ghash);
/*
* Set the individual address filter hash.
*
* XXX Is 0 the right value when promiscuous is off? This hw feature
* seems to support the concept of MAC address aliases, does such a
* thing even exist?
*/
if ((ifp->if_flags & IFF_PROMISC))
ihash = 0xffffffffffffffffLLU;
else {
ihash = 0;
}
WR4(sc, FEC_IAUR_REG, (uint32_t)(ihash >> 32));
WR4(sc, FEC_IALR_REG, (uint32_t)ihash);
/*
* Set the primary address.
*/
eaddr = IF_LLADDR(ifp);
WR4(sc, FEC_PALR_REG, (eaddr[0] << 24) | (eaddr[1] << 16) |
(eaddr[2] << 8) | eaddr[3]);
WR4(sc, FEC_PAUR_REG, (eaddr[4] << 24) | (eaddr[5] << 16));
}
static void
ffec_stop_locked(struct ffec_softc *sc)
{
struct ifnet *ifp;
struct ffec_hwdesc *desc;
struct ffec_bufmap *bmap;
int idx;
FFEC_ASSERT_LOCKED(sc);
ifp = sc->ifp;
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
sc->tx_watchdog_count = 0;
sc->stats_harvest_count = 0;
/*
* Stop the hardware, mask all interrupts, and clear all current
* interrupt status bits.
*/
WR4(sc, FEC_ECR_REG, RD4(sc, FEC_ECR_REG) & ~FEC_ECR_ETHEREN);
WR4(sc, FEC_IEM_REG, 0x00000000);
WR4(sc, FEC_IER_REG, 0xffffffff);
/*
* Stop the media-check callout. Do not use callout_drain() because
* we're holding a mutex the callout acquires, and if it's currently
* waiting to acquire it, we'd deadlock. If it is waiting now, the
* ffec_tick() routine will return without doing anything when it sees
* that IFF_DRV_RUNNING is not set, so avoiding callout_drain() is safe.
*/
callout_stop(&sc->ffec_callout);
/*
* Discard all untransmitted buffers. Each buffer is simply freed;
* it's as if the bits were transmitted and then lost on the wire.
*
* XXX Is this right? Or should we use IFQ_DRV_PREPEND() to put them
* back on the queue for when we get restarted later?
*/
idx = sc->tx_idx_tail;
while (idx != sc->tx_idx_head) {
desc = &sc->txdesc_ring[idx];
bmap = &sc->txbuf_map[idx];
if (desc->buf_paddr != 0) {
bus_dmamap_unload(sc->txbuf_tag, bmap->map);
m_freem(bmap->mbuf);
bmap->mbuf = NULL;
ffec_setup_txdesc(sc, idx, 0, 0);
}
idx = next_txidx(sc, idx);
}
/*
* Discard all unprocessed receive buffers. This amounts to just
* pretending that nothing ever got received into them. We reuse the
* mbuf already mapped for each desc, simply turning the EMPTY flags
* back on so they'll get reused when we start up again.
*/
for (idx = 0; idx < RX_DESC_COUNT; ++idx) {
desc = &sc->rxdesc_ring[idx];
ffec_setup_rxdesc(sc, idx, desc->buf_paddr);
}
}
static void
ffec_init_locked(struct ffec_softc *sc)
{
struct ifnet *ifp = sc->ifp;
uint32_t maxbuf, maxfl, regval;
FFEC_ASSERT_LOCKED(sc);
/*
* The hardware has a limit of 0x7ff as the max frame length (see
* comments for MRBR below), and we use mbuf clusters as receive
* buffers, and we currently are designed to receive an entire frame
* into a single buffer.
*
* We start with a MCLBYTES-sized cluster, but we have to offset into
* the buffer by ETHER_ALIGN to make room for post-receive re-alignment,
* and then that value has to be rounded up to the hardware's DMA
* alignment requirements, so all in all our buffer is that much smaller
* than MCLBYTES.
*
* The resulting value is used as the frame truncation length and the
* max buffer receive buffer size for now. It'll become more complex
* when we support jumbo frames and receiving fragments of them into
* separate buffers.
*/
maxbuf = MCLBYTES - roundup(ETHER_ALIGN, FEC_RXBUF_ALIGN);
maxfl = min(maxbuf, 0x7ff);
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
return;
/* Mask all interrupts and clear all current interrupt status bits. */
WR4(sc, FEC_IEM_REG, 0x00000000);
WR4(sc, FEC_IER_REG, 0xffffffff);
/*
* Go set up palr/puar, galr/gaur, ialr/iaur.
*/
ffec_setup_rxfilter(sc);
/*
* TFWR - Transmit FIFO watermark register.
*
* Set the transmit fifo watermark register to "store and forward" mode
* and also set a threshold of 128 bytes in the fifo before transmission
* of a frame begins (to avoid dma underruns). Recent FEC hardware
* supports STRFWD and when that bit is set, the watermark level in the
* low bits is ignored. Older hardware doesn't have STRFWD, but writing
* to that bit is innocuous, and the TWFR bits get used instead.
*/
WR4(sc, FEC_TFWR_REG, FEC_TFWR_STRFWD | FEC_TFWR_TWFR_128BYTE);
/* RCR - Receive control register.
*
* Set max frame length + clean out anything left from u-boot.
*/
WR4(sc, FEC_RCR_REG, (maxfl << FEC_RCR_MAX_FL_SHIFT));
/*
* TCR - Transmit control register.
*
* Clean out anything left from u-boot. Any necessary values are set in
* ffec_miibus_statchg() based on the media type.
*/
WR4(sc, FEC_TCR_REG, 0);
/*
* OPD - Opcode/pause duration.
*
* XXX These magic numbers come from u-boot.
*/
WR4(sc, FEC_OPD_REG, 0x00010020);
/*
* FRSR - Fifo receive start register.
*
* This register does not exist on imx6, it is present on earlier
* hardware. The u-boot code sets this to a non-default value that's 32
* bytes larger than the default, with no clue as to why. The default
* value should work fine, so there's no code to init it here.
*/
/*
* MRBR - Max RX buffer size.
*
* Note: For hardware prior to imx6 this value cannot exceed 0x07ff,
* but the datasheet says no such thing for imx6. On the imx6, setting
* this to 2K without setting EN1588 resulted in a crazy runaway
* receive loop in the hardware, where every rx descriptor in the ring
* had its EMPTY flag cleared, no completion or error flags set, and a
* length of zero. I think maybe you can only exceed it when EN1588 is
* set, like maybe that's what enables jumbo frames, because in general
* the EN1588 flag seems to be the "enable new stuff" vs. "be legacy-
* compatible" flag.
*/
WR4(sc, FEC_MRBR_REG, maxfl << FEC_MRBR_R_BUF_SIZE_SHIFT);
/*
* FTRL - Frame truncation length.
*
* Must be greater than or equal to the value set in FEC_RCR_MAXFL.
*/
WR4(sc, FEC_FTRL_REG, maxfl);
/*
* RDSR / TDSR descriptor ring pointers.
*
* When we turn on ECR_ETHEREN at the end, the hardware zeroes its
* internal current descriptor index values for both rings, so we zero
* our index values as well.
*/
sc->rx_idx = 0;
sc->tx_idx_head = sc->tx_idx_tail = 0;
sc->txcount = 0;
WR4(sc, FEC_RDSR_REG, sc->rxdesc_ring_paddr);
WR4(sc, FEC_TDSR_REG, sc->txdesc_ring_paddr);
/*
* EIM - interrupt mask register.
*
* We always enable the same set of interrupts while running; unlike
* some drivers there's no need to change the mask on the fly depending
* on what operations are in progress.
*/
WR4(sc, FEC_IEM_REG, FEC_IER_TXF | FEC_IER_RXF | FEC_IER_EBERR);
/*
* MIBC - MIB control (hardware stats).
*/
regval = RD4(sc, FEC_MIBC_REG);
WR4(sc, FEC_MIBC_REG, regval | FEC_MIBC_DIS);
ffec_clear_stats(sc);
WR4(sc, FEC_MIBC_REG, regval & ~FEC_MIBC_DIS);
/*
* ECR - Ethernet control register.
*
* This must happen after all the other config registers are set. If
* we're running on little-endian hardware, also set the flag for byte-
* swapping descriptor ring entries. This flag doesn't exist on older
* hardware, but it can be safely set -- the bit position it occupies
* was unused.
*/
regval = RD4(sc, FEC_ECR_REG);
#if _BYTE_ORDER == _LITTLE_ENDIAN
regval |= FEC_ECR_DBSWP;
#endif
regval |= FEC_ECR_ETHEREN;
WR4(sc, FEC_ECR_REG, regval);
ifp->if_drv_flags |= IFF_DRV_RUNNING;
/*
* Call mii_mediachg() which will call back into ffec_miibus_statchg() to
* set up the remaining config registers based on the current media.
*/
mii_mediachg(sc->mii_softc);
callout_reset(&sc->ffec_callout, hz, ffec_tick, sc);
/*
* Tell the hardware that receive buffers are available. They were made
* available in ffec_attach() or ffec_stop().
*/
WR4(sc, FEC_RDAR_REG, FEC_RDAR_RDAR);
}
static void
ffec_init(void *if_softc)
{
struct ffec_softc *sc = if_softc;
FFEC_LOCK(sc);
ffec_init_locked(sc);
FFEC_UNLOCK(sc);
}
static void
ffec_intr(void *arg)
{
struct ffec_softc *sc;
uint32_t ier;
sc = arg;
FFEC_LOCK(sc);
ier = RD4(sc, FEC_IER_REG);
if (ier & FEC_IER_TXF) {
WR4(sc, FEC_IER_REG, FEC_IER_TXF);
ffec_txfinish_locked(sc);
}
if (ier & FEC_IER_RXF) {
WR4(sc, FEC_IER_REG, FEC_IER_RXF);
ffec_rxfinish_locked(sc);
}
/*
* We actually don't care about most errors, because the hardware copes
* with them just fine, discarding the incoming bad frame, or forcing a
* bad CRC onto an outgoing bad frame, and counting the errors in the
* stats registers. The one that really matters is EBERR (DMA bus
* error) because the hardware automatically clears ECR[ETHEREN] and we
* have to restart it here. It should never happen.
*/
if (ier & FEC_IER_EBERR) {
WR4(sc, FEC_IER_REG, FEC_IER_EBERR);
device_printf(sc->dev,
"Ethernet DMA error, restarting controller.\n");
ffec_stop_locked(sc);
ffec_init_locked(sc);
}
FFEC_UNLOCK(sc);
}
static int
ffec_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct ffec_softc *sc;
struct mii_data *mii;
struct ifreq *ifr;
int mask, error;
sc = ifp->if_softc;
ifr = (struct ifreq *)data;
error = 0;
switch (cmd) {
case SIOCSIFFLAGS:
FFEC_LOCK(sc);
if (ifp->if_flags & IFF_UP) {
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
if ((ifp->if_flags ^ sc->if_flags) &
(IFF_PROMISC | IFF_ALLMULTI))
ffec_setup_rxfilter(sc);
} else {
if (!sc->is_detaching)
ffec_init_locked(sc);
}
} else {
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
ffec_stop_locked(sc);
}
sc->if_flags = ifp->if_flags;
FFEC_UNLOCK(sc);
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
FFEC_LOCK(sc);
ffec_setup_rxfilter(sc);
FFEC_UNLOCK(sc);
}
break;
case SIOCSIFMEDIA:
case SIOCGIFMEDIA:
mii = sc->mii_softc;
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, cmd);
break;
case SIOCSIFCAP:
mask = ifp->if_capenable ^ ifr->ifr_reqcap;
if (mask & IFCAP_VLAN_MTU) {
/* No work to do except acknowledge the change took. */
ifp->if_capenable ^= IFCAP_VLAN_MTU;
}
break;
default:
error = ether_ioctl(ifp, cmd, data);
break;
}
return (error);
}
static int
ffec_detach(device_t dev)
{
struct ffec_softc *sc;
bus_dmamap_t map;
int idx;
/*
* NB: This function can be called internally to unwind a failure to
* attach. Make sure a resource got allocated/created before destroying.
*/
sc = device_get_softc(dev);
if (sc->is_attached) {
FFEC_LOCK(sc);
sc->is_detaching = true;
ffec_stop_locked(sc);
FFEC_UNLOCK(sc);
callout_drain(&sc->ffec_callout);
ether_ifdetach(sc->ifp);
}
/* XXX no miibus detach? */
/* Clean up RX DMA resources and free mbufs. */
for (idx = 0; idx < RX_DESC_COUNT; ++idx) {
if ((map = sc->rxbuf_map[idx].map) != NULL) {
bus_dmamap_unload(sc->rxbuf_tag, map);
bus_dmamap_destroy(sc->rxbuf_tag, map);
m_freem(sc->rxbuf_map[idx].mbuf);
}
}
if (sc->rxbuf_tag != NULL)
bus_dma_tag_destroy(sc->rxbuf_tag);
if (sc->rxdesc_map != NULL) {
bus_dmamap_unload(sc->rxdesc_tag, sc->rxdesc_map);
bus_dmamap_destroy(sc->rxdesc_tag, sc->rxdesc_map);
}
if (sc->rxdesc_tag != NULL)
bus_dma_tag_destroy(sc->rxdesc_tag);
/* Clean up TX DMA resources. */
for (idx = 0; idx < TX_DESC_COUNT; ++idx) {
if ((map = sc->txbuf_map[idx].map) != NULL) {
/* TX maps are already unloaded. */
bus_dmamap_destroy(sc->txbuf_tag, map);
}
}
if (sc->txbuf_tag != NULL)
bus_dma_tag_destroy(sc->txbuf_tag);
if (sc->txdesc_map != NULL) {
bus_dmamap_unload(sc->txdesc_tag, sc->txdesc_map);
bus_dmamap_destroy(sc->txdesc_tag, sc->txdesc_map);
}
if (sc->txdesc_tag != NULL)
bus_dma_tag_destroy(sc->txdesc_tag);
/* Release bus resources. */
if (sc->intr_cookie)
bus_teardown_intr(dev, sc->irq_res, sc->intr_cookie);
if (sc->irq_res != NULL)
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq_res);
if (sc->mem_res != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->mem_res);
FFEC_LOCK_DESTROY(sc);
return (0);
}
static int
ffec_attach(device_t dev)
{
struct ffec_softc *sc;
struct ifnet *ifp = NULL;
struct mbuf *m;
phandle_t ofw_node;
int error, rid;
uint8_t eaddr[ETHER_ADDR_LEN];
char phy_conn_name[32];
uint32_t idx, mscr;
sc = device_get_softc(dev);
sc->dev = dev;
FFEC_LOCK_INIT(sc);
/*
* There are differences in the implementation and features of the FEC
* hardware on different SoCs, so figure out what type we are.
*/
sc->fectype = ofw_bus_search_compatible(dev, compat_data)->ocd_data;
/*
* We have to be told what kind of electrical connection exists between
* the MAC and PHY or we can't operate correctly.
*/
if ((ofw_node = ofw_bus_get_node(dev)) == -1) {
device_printf(dev, "Impossible: Can't find ofw bus node\n");
error = ENXIO;
goto out;
}
if (OF_searchprop(ofw_node, "phy-mode",
phy_conn_name, sizeof(phy_conn_name)) != -1) {
if (strcasecmp(phy_conn_name, "mii") == 0)
sc->phy_conn_type = PHY_CONN_MII;
else if (strcasecmp(phy_conn_name, "rmii") == 0)
sc->phy_conn_type = PHY_CONN_RMII;
else if (strcasecmp(phy_conn_name, "rgmii") == 0)
sc->phy_conn_type = PHY_CONN_RGMII;
}
if (sc->phy_conn_type == PHY_CONN_UNKNOWN) {
device_printf(sc->dev, "No valid 'phy-mode' "
"property found in FDT data for device.\n");
error = ENOATTR;
goto out;
}
callout_init_mtx(&sc->ffec_callout, &sc->mtx, 0);
/* Allocate bus resources for accessing the hardware. */
rid = 0;
sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (sc->mem_res == NULL) {
device_printf(dev, "could not allocate memory resources.\n");
error = ENOMEM;
goto out;
}
rid = 0;
sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_ACTIVE);
if (sc->irq_res == NULL) {
device_printf(dev, "could not allocate interrupt resources.\n");
error = ENOMEM;
goto out;
}
/*
* Set up TX descriptor ring, descriptors, and dma maps.
*/
error = bus_dma_tag_create(
bus_get_dma_tag(dev), /* Parent tag. */
FEC_DESC_RING_ALIGN, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
TX_DESC_SIZE, 1, /* maxsize, nsegments */
TX_DESC_SIZE, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->txdesc_tag);
if (error != 0) {
device_printf(sc->dev,
"could not create TX ring DMA tag.\n");
goto out;
}
error = bus_dmamem_alloc(sc->txdesc_tag, (void**)&sc->txdesc_ring,
BUS_DMA_COHERENT | BUS_DMA_WAITOK | BUS_DMA_ZERO, &sc->txdesc_map);
if (error != 0) {
device_printf(sc->dev,
"could not allocate TX descriptor ring.\n");
goto out;
}
error = bus_dmamap_load(sc->txdesc_tag, sc->txdesc_map, sc->txdesc_ring,
TX_DESC_SIZE, ffec_get1paddr, &sc->txdesc_ring_paddr, 0);
if (error != 0) {
device_printf(sc->dev,
"could not load TX descriptor ring map.\n");
goto out;
}
error = bus_dma_tag_create(
bus_get_dma_tag(dev), /* Parent tag. */
FEC_TXBUF_ALIGN, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MCLBYTES, 1, /* maxsize, nsegments */
MCLBYTES, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->txbuf_tag);
if (error != 0) {
device_printf(sc->dev,
"could not create TX ring DMA tag.\n");
goto out;
}
for (idx = 0; idx < TX_DESC_COUNT; ++idx) {
error = bus_dmamap_create(sc->txbuf_tag, 0,
&sc->txbuf_map[idx].map);
if (error != 0) {
device_printf(sc->dev,
"could not create TX buffer DMA map.\n");
goto out;
}
ffec_setup_txdesc(sc, idx, 0, 0);
}
/*
* Set up RX descriptor ring, descriptors, dma maps, and mbufs.
*/
error = bus_dma_tag_create(
bus_get_dma_tag(dev), /* Parent tag. */
FEC_DESC_RING_ALIGN, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
RX_DESC_SIZE, 1, /* maxsize, nsegments */
RX_DESC_SIZE, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->rxdesc_tag);
if (error != 0) {
device_printf(sc->dev,
"could not create RX ring DMA tag.\n");
goto out;
}
error = bus_dmamem_alloc(sc->rxdesc_tag, (void **)&sc->rxdesc_ring,
BUS_DMA_COHERENT | BUS_DMA_WAITOK | BUS_DMA_ZERO, &sc->rxdesc_map);
if (error != 0) {
device_printf(sc->dev,
"could not allocate RX descriptor ring.\n");
goto out;
}
error = bus_dmamap_load(sc->rxdesc_tag, sc->rxdesc_map, sc->rxdesc_ring,
RX_DESC_SIZE, ffec_get1paddr, &sc->rxdesc_ring_paddr, 0);
if (error != 0) {
device_printf(sc->dev,
"could not load RX descriptor ring map.\n");
goto out;
}
error = bus_dma_tag_create(
bus_get_dma_tag(dev), /* Parent tag. */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MCLBYTES, 1, /* maxsize, nsegments */
MCLBYTES, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->rxbuf_tag);
if (error != 0) {
device_printf(sc->dev,
"could not create RX buf DMA tag.\n");
goto out;
}
for (idx = 0; idx < RX_DESC_COUNT; ++idx) {
error = bus_dmamap_create(sc->rxbuf_tag, 0,
&sc->rxbuf_map[idx].map);
if (error != 0) {
device_printf(sc->dev,
"could not create RX buffer DMA map.\n");
goto out;
}
if ((m = ffec_alloc_mbufcl(sc)) == NULL) {
device_printf(dev, "Could not alloc mbuf\n");
error = ENOMEM;
goto out;
}
if ((error = ffec_setup_rxbuf(sc, idx, m)) != 0) {
device_printf(sc->dev,
"could not create new RX buffer.\n");
goto out;
}
}
/* Try to get the MAC address from the hardware before resetting it. */
ffec_get_hwaddr(sc, eaddr);
/* Reset the hardware. Disables all interrupts. */
WR4(sc, FEC_ECR_REG, FEC_ECR_RESET);
/* Setup interrupt handler. */
error = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_NET | INTR_MPSAFE,
NULL, ffec_intr, sc, &sc->intr_cookie);
if (error != 0) {
device_printf(dev, "could not setup interrupt handler.\n");
goto out;
}
/*
* Set up the PHY control register.
*
* Speed formula for ENET is md_clock = mac_clock / ((N + 1) * 2).
* Speed formula for FEC is md_clock = mac_clock / (N * 2)
*
* XXX - Revisit this...
*
* For a Wandboard imx6 (ENET) I was originally using 4, but the uboot
* code uses 10. Both values seem to work, but I suspect many modern
* PHY parts can do mdio at speeds far above the standard 2.5 MHz.
*
* Different imx manuals use confusingly different terminology (things
* like "system clock" and "internal module clock") with examples that
* use frequencies that have nothing to do with ethernet, giving the
* vague impression that maybe the clock in question is the periphclock
* or something. In fact, on an imx53 development board (FEC),
* measuring the mdio clock at the pin on the PHY and playing with
* various divisors showed that the root speed was 66 MHz (clk_ipg_root
* aka periphclock) and 13 was the right divisor.
*
* All in all, it seems likely that 13 is a safe divisor for now,
* because if we really do need to base it on the peripheral clock
* speed, then we need a platform-independant get-clock-freq API.
*/
mscr = 13 << FEC_MSCR_MII_SPEED_SHIFT;
if (OF_hasprop(ofw_node, "phy-disable-preamble")) {
mscr |= FEC_MSCR_DIS_PRE;
if (bootverbose)
device_printf(dev, "PHY preamble disabled\n");
}
WR4(sc, FEC_MSCR_REG, mscr);
/* Set up the ethernet interface. */
sc->ifp = ifp = if_alloc(IFT_ETHER);
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_capabilities = IFCAP_VLAN_MTU;
ifp->if_capenable = ifp->if_capabilities;
ifp->if_start = ffec_txstart;
ifp->if_ioctl = ffec_ioctl;
ifp->if_init = ffec_init;
IFQ_SET_MAXLEN(&ifp->if_snd, TX_DESC_COUNT - 1);
ifp->if_snd.ifq_drv_maxlen = TX_DESC_COUNT - 1;
IFQ_SET_READY(&ifp->if_snd);
ifp->if_hdrlen = sizeof(struct ether_vlan_header);
#if 0 /* XXX The hardware keeps stats we could use for these. */
ifp->if_linkmib = &sc->mibdata;
ifp->if_linkmiblen = sizeof(sc->mibdata);
#endif
/* Set up the miigasket hardware (if any). */
ffec_miigasket_setup(sc);
/* Attach the mii driver. */
error = mii_attach(dev, &sc->miibus, ifp, ffec_media_change,
ffec_media_status, BMSR_DEFCAPMASK, MII_PHY_ANY, MII_OFFSET_ANY,
(sc->fectype & FECTYPE_MVF) ? MIIF_FORCEANEG : 0);
if (error != 0) {
device_printf(dev, "PHY attach failed\n");
goto out;
}
sc->mii_softc = device_get_softc(sc->miibus);
/* All ready to run, attach the ethernet interface. */
ether_ifattach(ifp, eaddr);
sc->is_attached = true;
error = 0;
out:
if (error != 0)
ffec_detach(dev);
return (error);
}
static int
ffec_probe(device_t dev)
{
uintptr_t fectype;
if (!ofw_bus_status_okay(dev))
return (ENXIO);
fectype = ofw_bus_search_compatible(dev, compat_data)->ocd_data;
if (fectype == FECTYPE_NONE)
return (ENXIO);
device_set_desc(dev, (fectype & FECFLAG_GBE) ?
"Freescale Gigabit Ethernet Controller" :
"Freescale Fast Ethernet Controller");
return (BUS_PROBE_DEFAULT);
}
static device_method_t ffec_methods[] = {
/* Device interface. */
DEVMETHOD(device_probe, ffec_probe),
DEVMETHOD(device_attach, ffec_attach),
DEVMETHOD(device_detach, ffec_detach),
/*
DEVMETHOD(device_shutdown, ffec_shutdown),
DEVMETHOD(device_suspend, ffec_suspend),
DEVMETHOD(device_resume, ffec_resume),
*/
/* MII interface. */
DEVMETHOD(miibus_readreg, ffec_miibus_readreg),
DEVMETHOD(miibus_writereg, ffec_miibus_writereg),
DEVMETHOD(miibus_statchg, ffec_miibus_statchg),
DEVMETHOD_END
};
static driver_t ffec_driver = {
"ffec",
ffec_methods,
sizeof(struct ffec_softc)
};
static devclass_t ffec_devclass;
DRIVER_MODULE(ffec, simplebus, ffec_driver, ffec_devclass, 0, 0);
DRIVER_MODULE(miibus, ffec, miibus_driver, miibus_devclass, 0, 0);
MODULE_DEPEND(ffec, ether, 1, 1, 1);
MODULE_DEPEND(ffec, miibus, 1, 1, 1);
Reference in New Issue View Git Blame Copy Permalink