freebsd-nq/sys/dev/twe/twe.c
2000-05-24 23:35:23 +00:00

1899 lines
54 KiB
C

/*-
* Copyright (c) 2000 Michael Smith
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Driver for the 3ware Escalade family of IDE RAID controllers.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#if __FreeBSD_version < 500000
# include <dev/twe/twe_compat.h>
#else
# include <sys/bio.h>
#endif
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/devicestat.h>
#include <sys/disk.h>
#include <sys/stat.h>
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/clock.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#include <dev/twe/twereg.h>
#include <dev/twe/twevar.h>
/*
* Initialisation, bus interface.
*/
static int twe_probe(device_t dev);
static int twe_attach(device_t dev);
static void twe_free(struct twe_softc *sc);
static void twe_startup(void *arg);
static int twe_detach(device_t dev);
static int twe_shutdown(device_t dev);
static int twe_suspend(device_t dev);
static int twe_resume(device_t dev);
static void twe_intr(void *arg);
/*
* Control device.
*/
static d_open_t twe_open;
static d_close_t twe_close;
static d_ioctl_t twe_ioctl;
/*
* Command submission.
*/
static void *twe_get_param(struct twe_softc *sc, int table_id, int parameter_id, size_t size,
void (* func)(struct twe_request *tr));
static int twe_init_connection(struct twe_softc *sc);
/*static int twe_wait_request(struct twe_request *tr);*/
static int twe_immediate_request(struct twe_request *tr);
static void twe_startio(struct twe_softc *sc);
static void twe_completeio(struct twe_request *tr);
/*
* Command I/O to controller.
*/
static int twe_start(struct twe_request *tr);
static void twe_done(struct twe_softc *sc);
static void twe_complete(struct twe_softc *sc);
static int twe_wait_status(struct twe_softc *sc, u_int32_t status, int timeout);
static int twe_drain_response_queue(struct twe_softc *sc);
static int twe_check_bits(struct twe_softc *sc, u_int32_t status_reg);
/*
* Interrupt handling.
*/
static void twe_host_intr(struct twe_softc *sc);
static void twe_attention_intr(struct twe_softc *sc);
static void twe_command_intr(struct twe_softc *sc);
static void twe_enable_interrupts(struct twe_softc *sc);
static void twe_disable_interrupts(struct twe_softc *sc);
/*
* Asynchronous event handling.
*/
static int twe_fetch_aen(struct twe_softc *sc);
static void twe_handle_aen(struct twe_request *tr);
static void twe_enqueue_aen(struct twe_softc *sc, u_int16_t aen);
/*static int twe_dequeue_aen(struct twe_softc *sc);*/
static int twe_drain_aen_queue(struct twe_softc *sc);
static int twe_find_aen(struct twe_softc *sc, u_int16_t aen);
/*
* Command buffer management.
*/
static struct twe_request *twe_get_request(struct twe_softc *sc);
static void twe_release_request(struct twe_request *tr);
static void twe_free_request(struct twe_request *tr);
static int twe_get_requestid(struct twe_request *tr);
static void twe_release_requestid(struct twe_request *tr);
static void twe_setup_data_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error);
static void twe_setup_request_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error);
static void twe_map_request(struct twe_request *tr);
static void twe_unmap_request(struct twe_request *tr);
/*
* Debugging.
*/
static char *twe_name_aen(u_int16_t aen);
#if 0
static void twe_print_request(struct twe_request *tr);
void twe_report(void);
#endif
/********************************************************************************
********************************************************************************
Public Interfaces
********************************************************************************
********************************************************************************/
devclass_t twe_devclass;
static device_method_t twe_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, twe_probe),
DEVMETHOD(device_attach, twe_attach),
DEVMETHOD(device_detach, twe_detach),
DEVMETHOD(device_shutdown, twe_shutdown),
DEVMETHOD(device_suspend, twe_suspend),
DEVMETHOD(device_resume, twe_resume),
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
{ 0, 0 }
};
static driver_t twe_pci_driver = {
"twe",
twe_methods,
sizeof(struct twe_softc)
};
DRIVER_MODULE(tw, pci, twe_pci_driver, twe_devclass, 0, 0);
#define TWE_CDEV_MAJOR 146
static struct cdevsw twe_cdevsw = {
/* open */ twe_open,
/* close */ twe_close,
/* read */ noread,
/* write */ nowrite,
/* ioctl */ twe_ioctl,
/* poll */ nopoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "twe",
/* maj */ TWE_CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ 0,
/* bmaj */ -1
};
/********************************************************************************
* Match a 3ware Escalade ATA RAID controller.
*/
static int
twe_probe(device_t dev)
{
debug_called(4);
if ((pci_get_vendor(dev) == TWE_VENDOR_ID) &&
(pci_get_device(dev) == TWE_DEVICE_ID)) {
device_set_desc(dev, TWE_DEVICE_NAME);
return(0);
}
return(ENXIO);
}
/********************************************************************************
* Free all of the resources associated with (sc).
*
* Should not be called if the controller is active.
*/
static void
twe_free(struct twe_softc *sc)
{
struct twe_request *tr;
debug_called(4);
/* throw away any command buffers */
while ((tr = TAILQ_FIRST(&sc->twe_freecmds)) != NULL) {
TAILQ_REMOVE(&sc->twe_freecmds, tr, tr_link);
twe_free_request(tr);
}
/* destroy the data-transfer DMA tag */
if (sc->twe_buffer_dmat)
bus_dma_tag_destroy(sc->twe_buffer_dmat);
/* disconnect the interrupt handler */
if (sc->twe_intr)
bus_teardown_intr(sc->twe_dev, sc->twe_irq, sc->twe_intr);
if (sc->twe_irq != NULL)
bus_release_resource(sc->twe_dev, SYS_RES_IRQ, 0, sc->twe_irq);
/* destroy the parent DMA tag */
if (sc->twe_parent_dmat)
bus_dma_tag_destroy(sc->twe_parent_dmat);
/* release the register window mapping */
if (sc->twe_io != NULL)
bus_release_resource(sc->twe_dev, SYS_RES_IOPORT, TWE_IO_CONFIG_REG, sc->twe_io);
/* destroy control device */
if (sc->twe_dev_t != (dev_t)NULL)
destroy_dev(sc->twe_dev_t);
}
/********************************************************************************
* Allocate resources, initialise the controller.
*/
static int
twe_attach(device_t dev)
{
struct twe_softc *sc;
int rid, error;
u_int32_t command;
debug_called(4);
/*
* Make sure we are going to be able to talk to this board.
*/
command = pci_read_config(dev, PCIR_COMMAND, 2);
if ((command & PCIM_CMD_PORTEN) == 0) {
device_printf(dev, "register window not available\n");
return(ENXIO);
}
/*
* Force the busmaster enable bit on, in case the BIOS forgot.
*/
command |= PCIM_CMD_BUSMASTEREN;
pci_write_config(dev, PCIR_COMMAND, command, 2);
/*
* Initialise the softc structure.
*/
sc = device_get_softc(dev);
bzero(sc, sizeof(*sc));
sc->twe_dev = dev;
TAILQ_INIT(&sc->twe_work);
TAILQ_INIT(&sc->twe_freecmds);
bioq_init(&sc->twe_bioq);
sc->twe_wait_aen = -1;
/*
* Allocate the PCI register window.
*/
rid = TWE_IO_CONFIG_REG;
sc->twe_io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1, RF_ACTIVE);
if (sc->twe_io == NULL) {
device_printf(sc->twe_dev, "can't allocate register window\n");
twe_free(sc);
return(ENXIO);
}
sc->twe_btag = rman_get_bustag(sc->twe_io);
sc->twe_bhandle = rman_get_bushandle(sc->twe_io);
/*
* Allocate the parent bus DMA tag appropriate for PCI.
*/
error = bus_dma_tag_create(NULL, /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MAXBSIZE, TWE_MAX_SGL_LENGTH, /* maxsize, nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
&sc->twe_parent_dmat);
if (error != 0) {
device_printf(dev, "can't allocate parent DMA tag\n");
twe_free(sc);
return(ENOMEM);
}
/*
* Allocate and connect our interrupt.
*/
rid = 0;
sc->twe_irq = bus_alloc_resource(sc->twe_dev, SYS_RES_IRQ, &rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE);
if (sc->twe_irq == NULL) {
device_printf(sc->twe_dev, "can't allocate interrupt\n");
twe_free(sc);
return(ENXIO);
}
error = bus_setup_intr(sc->twe_dev, sc->twe_irq, INTR_TYPE_BIO, twe_intr, sc, &sc->twe_intr);
if (error) {
device_printf(sc->twe_dev, "can't set up interrupt\n");
twe_free(sc);
return(ENXIO);
}
/*
* Create DMA tag for mapping objects into controller-addressable space.
*/
error = bus_dma_tag_create(sc->twe_parent_dmat, /* parent */
1, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
MAXBSIZE, TWE_MAX_SGL_LENGTH, /* maxsize, nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
&sc->twe_buffer_dmat);
if (error != 0) {
device_printf(sc->twe_dev, "can't allocate data buffer DMA tag\n");
twe_free(sc);
return(ENOMEM);
}
/*
* Create the control device.
*/
sc->twe_dev_t = make_dev(&twe_cdevsw, device_get_unit(sc->twe_dev), UID_ROOT, GID_OPERATOR,
S_IRUSR | S_IWUSR, "twe%d", device_get_unit(sc->twe_dev));
/*
* Schedule ourselves to bring the controller up once interrupts are available.
* This isn't strictly necessary, since we disable interrupts while probing the
* controller, but it is more in keeping with common practice for other disk
* devices.
*/
bzero(&sc->twe_ich, sizeof(struct intr_config_hook));
sc->twe_ich.ich_func = twe_startup;
sc->twe_ich.ich_arg = sc;
if (config_intrhook_establish(&sc->twe_ich) != 0) {
device_printf(sc->twe_dev, "can't establish configuration hook\n");
twe_free(sc);
return(ENXIO);
}
return(0);
}
/********************************************************************************
* Initialise the controller, locate disk devices and attach children to them.
*/
static void
twe_startup(void *arg)
{
struct twe_softc *sc = (struct twe_softc *)arg;
struct twe_drive *dr;
int i, error;
u_int32_t status_reg;
TWE_Param *drives, *capacity;
debug_called(4);
/* pull ourselves off the intrhook chain */
config_intrhook_disestablish(&sc->twe_ich);
/*
* Wait for the controller to come ready.
*/
if (twe_wait_status(sc, TWE_STATUS_MICROCONTROLLER_READY, 60)) {
device_printf(sc->twe_dev, "microcontroller not ready\n");
return;
}
/*
* Disable interrupts from the card while we're getting it into a safe state.
*/
twe_disable_interrupts(sc);
/*
* Soft reset the controller, look for the AEN acknowledging the reset,
* check for errors, drain the response queue.
*/
for (i = 0; i < TWE_MAX_RESET_TRIES; i++) {
if (i > 0)
device_printf(sc->twe_dev, "reset %d failed, trying again\n", i);
TWE_SOFT_RESET(sc);
if (twe_wait_status(sc, TWE_STATUS_ATTENTION_INTERRUPT, 15)) {
device_printf(sc->twe_dev, "no attention interrupt");
continue;
}
if (twe_drain_aen_queue(sc)) {
device_printf(sc->twe_dev, "can't drain AEN queue\n");
continue;
}
if (twe_find_aen(sc, TWE_AEN_SOFT_RESET)) {
device_printf(sc->twe_dev, "reset not reported\n");
continue;
}
status_reg = TWE_STATUS(sc);
if (TWE_STATUS_ERRORS(status_reg) || twe_check_bits(sc, status_reg)) {
device_printf(sc->twe_dev, "controller errors detected\n");
continue;
}
if (twe_drain_response_queue(sc)) {
device_printf(sc->twe_dev, "can't drain response queue\n");
continue;
}
break; /* reset process complete */
}
/* did we give up? */
if (i >= TWE_MAX_RESET_TRIES) {
device_printf(sc->twe_dev, "can't initialise controller, giving up\n");
return;
}
/*
* The controller is in a safe state, so try to find drives attached to it.
* XXX ick, magic numbers
*/
if ((drives = twe_get_param(sc, 3, 3, TWE_MAX_UNITS, NULL)) == NULL) {
device_printf(sc->twe_dev, "can't detect attached units\n");
return;
}
/*
* For each detected unit, create a child device.
*/
for (i = 0, dr = &sc->twe_drive[0]; i < TWE_MAX_UNITS; i++, dr++) {
if (drives->data[i] == 0) /* unit not present */
continue;
if ((capacity = twe_get_param(sc, TWE_UNIT_INFORMATION_TABLE_BASE + i, 4, 4, NULL)) == NULL) {
device_printf(sc->twe_dev, "error fetching capacity for unit %d\n", i);
continue;
}
dr->td_size = *(u_int32_t *)capacity->data;
free(capacity, M_DEVBUF);
/* build synthetic geometry as per controller internal rules */
if (dr->td_size > 0x200000) {
dr->td_heads = 255;
dr->td_sectors = 63;
} else {
dr->td_heads = 64;
dr->td_sectors = 32;
}
dr->td_cylinders = dr->td_size / (dr->td_heads * dr->td_sectors);
dr->td_unit = i;
dr->td_state = TWE_DRIVE_UNKNOWN; /* XXX how do we find out what the real state is? */
dr->td_raidlevel = TWE_DRIVE_UNKNOWN; /* XXX how do we find out what the real raidlevel is? */
dr->td_disk = device_add_child(sc->twe_dev, NULL, -1);
if (dr->td_disk == 0)
device_printf(sc->twe_dev, "device_add_child failed\n");
device_set_ivars(dr->td_disk, dr);
}
free(drives, M_DEVBUF);
if ((error = bus_generic_attach(sc->twe_dev)) != 0)
device_printf(sc->twe_dev, "bus_generic_attach returned %d\n", error);
/*
* Initialise connection with controller.
*/
twe_init_connection(sc);
/*
* Mark controller up and ready to run.
*/
sc->twe_state &= ~TWE_STATE_SHUTDOWN;
/*
* Finally enable interrupts .
*/
twe_enable_interrupts(sc);
}
/********************************************************************************
* Disconnect from the controller completely, in preparation for unload.
*/
static int
twe_detach(device_t dev)
{
struct twe_softc *sc = device_get_softc(dev);
int s, error;
debug_called(4);
error = EBUSY;
s = splbio();
if (sc->twe_state & TWE_STATE_OPEN)
goto out;
/*
* Shut the controller down.
*/
if ((error = twe_shutdown(dev)))
goto out;
twe_free(sc);
error = 0;
out:
splx(s);
return(error);
}
/********************************************************************************
* Bring the controller down to a dormant state and detach all child devices.
*
* Note that we can assume that the bioq on the controller is empty, as we won't
* allow shutdown if any device is open.
*/
static int
twe_shutdown(device_t dev)
{
struct twe_softc *sc = device_get_softc(dev);
int i, s, error;
debug_called(4);
s = splbio();
error = 0;
/*
* Mark the controller as shutting down, and disable any further interrupts.
*/
sc->twe_state |= TWE_STATE_SHUTDOWN;
twe_disable_interrupts(sc);
/*
* Delete all our child devices.
*/
for (i = 0; i < TWE_MAX_UNITS; i++) {
if (sc->twe_drive[i].td_disk != 0) {
if ((error = device_delete_child(sc->twe_dev, sc->twe_drive[i].td_disk)) != 0)
goto out;
sc->twe_drive[i].td_disk = 0;
}
}
out:
splx(s);
return(error);
}
/********************************************************************************
* Bring the controller to a quiescent state, ready for system suspend.
*
* XXX this isn't really very well implemented.
*/
static int
twe_suspend(device_t dev)
{
struct twe_softc *sc = device_get_softc(dev);
int s;
debug_called(4);
s = splbio();
sc->twe_state |= TWE_STATE_SUSPEND;
twe_disable_interrupts(sc);
splx(s);
return(0);
}
/********************************************************************************
* Bring the controller back to a state ready for operation.
*/
static int
twe_resume(device_t dev)
{
struct twe_softc *sc = device_get_softc(dev);
debug_called(4);
sc->twe_state &= ~TWE_STATE_SUSPEND;
twe_enable_interrupts(sc);
return(0);
}
/*******************************************************************************
* Take an interrupt, or be poked by other code to look for interrupt-worthy
* status.
*/
static void
twe_intr(void *arg)
{
struct twe_softc *sc = (struct twe_softc *)arg;
u_int32_t status_reg;
debug_called(4);
/*
* Collect current interrupt status.
*/
status_reg = TWE_STATUS(sc);
twe_check_bits(sc, status_reg);
/*
* Dispatch based on interrupt status
*/
if (status_reg & TWE_STATUS_HOST_INTERRUPT)
twe_host_intr(sc);
if (status_reg & TWE_STATUS_ATTENTION_INTERRUPT)
twe_attention_intr(sc);
if (status_reg & TWE_STATUS_COMMAND_INTERRUPT)
twe_command_intr(sc);
if (status_reg * TWE_STATUS_RESPONSE_INTERRUPT)
twe_done(sc);
};
/********************************************************************************
********************************************************************************
Control Device
********************************************************************************
********************************************************************************/
/********************************************************************************
* Accept an open operation on the control device.
*/
static int
twe_open(dev_t dev, int flags, int fmt, struct proc *p)
{
int unit = minor(dev);
struct twe_softc *sc = devclass_get_softc(twe_devclass, unit);
sc->twe_state |= TWE_STATE_OPEN;
return(0);
}
/********************************************************************************
* Accept the last close on the control device.
*/
static int
twe_close(dev_t dev, int flags, int fmt, struct proc *p)
{
int unit = minor(dev);
struct twe_softc *sc = devclass_get_softc(twe_devclass, unit);
sc->twe_state &= ~TWE_STATE_OPEN;
return (0);
}
/********************************************************************************
* Handle controller-specific control operations.
*/
static int
twe_ioctl(dev_t dev, u_long cmd, caddr_t addr, int32_t flag, struct proc *p)
{
switch(cmd) {
default:
return(ENOTTY);
}
}
/********************************************************************************
********************************************************************************
Command Submission
********************************************************************************
********************************************************************************/
/*******************************************************************************
* Receive a bio structure from a child device and queue it on a particular
* controller, then poke the controller to start as much work as it can.
*/
int
twe_submit_buf(struct twe_softc *sc, struct bio *bp)
{
int s;
debug_called(4);
s = splbio();
bioq_insert_tail(&sc->twe_bioq, bp);
splx(s);
twe_startio(sc);
return(0);
}
/********************************************************************************
* Perform a TWE_OP_GET_PARAM command. If a callback function is provided, it
* will be called with the command when it's completed. If no callback is
* provided, we will wait for the command to complete and then return just the data.
* The caller is responsible for freeing the data when done with it.
*/
static void *
twe_get_param(struct twe_softc *sc, int table_id, int parameter_id, size_t size, void (* func)(struct twe_request *tr))
{
struct twe_request *tr;
TWE_Command *cmd;
TWE_Param *param;
int error;
debug_called(4);
tr = NULL;
param = NULL;
/* get a command */
if ((tr = twe_get_request(sc)) == NULL)
goto err;
/* get a buffer */
if ((param = (TWE_Param *)malloc(TWE_SECTOR_SIZE, M_DEVBUF, M_NOWAIT)) == NULL)
goto err;
tr->tr_data = param;
tr->tr_length = TWE_SECTOR_SIZE;
tr->tr_flags = TWE_CMD_DATAIN | TWE_CMD_DATAOUT;
tr->tr_complete = NULL;
tr->tr_private = NULL;
/* build the command for the controller */
cmd = &tr->tr_command;
cmd->opcode = TWE_OP_GET_PARAM;
cmd->sgl_offset = 2;
cmd->size = 2;
cmd->unit = 0;
cmd->count = 1;
/* map the command/data into controller-visible space */
twe_map_request(tr);
/* fill in the outbound parameter data */
param->table_id = table_id;
param->parameter_id = parameter_id;
param->parameter_size_bytes = size;
/* submit the command and either wait or let the callback handle it */
if (func == NULL) {
/* XXX could use twe_wait_request here if interrupts were enabled? */
error = twe_immediate_request(tr);
if (error == 0) {
if (tr->tr_command.status != 0) {
debug(2, "command failed - 0x%x", tr->tr_command.status);
goto err;
}
twe_release_request(tr);
return(param);
}
} else {
tr->tr_complete = func;
error = twe_start(tr);
if (error == 0)
return(func);
}
/* something failed */
err:
debug(1, "failed");
if (tr != NULL)
twe_release_request(tr);
if (param != NULL)
free(param, M_DEVBUF);
return(NULL);
}
/********************************************************************************
* Perform a TWE_OP_INIT_CONNECTION command, returns nonzero on error.
*
* Typically called with interrupts disabled.
*/
static int
twe_init_connection(struct twe_softc *sc)
{
struct twe_request *tr;
TWE_Command *cmd;
int error;
debug_called(4);
/* get a command */
if ((tr = twe_get_request(sc)) == NULL)
return(NULL);
/* build the command */
cmd = &tr->tr_command;
cmd->opcode = TWE_OP_INIT_CONNECTION;
cmd->sgl_offset = 0;
cmd->size = 3;
cmd->unit = 0;
cmd->count = TWE_INIT_MESSAGE_CREDITS;
cmd->args.init_connection.response_queue_pointer = 0;
/* map the command into controller-visible space */
twe_map_request(tr);
/* submit the command */
error = twe_immediate_request(tr);
/* XXX check command result? */
twe_unmap_request(tr);
twe_release_request(tr);
return(error);
}
#if 0
/********************************************************************************
* Start the command (tr) and sleep waiting for it to complete.
*
* Successfully completed commands are dequeued.
*/
static int
twe_wait_request(struct twe_request *tr)
{
int error, s;
debug_called(4);
error = 0;
tr->tr_private = tr; /* our wait channel */
s = splbio();
if ((error = twe_start(tr)) != 0)
goto out;
tsleep(tr->tr_private, PUSER, "twwcmd", hz); /* XXX more sensible timeout than 1s? */
splx(s);
out:
return(error);
}
#endif
/********************************************************************************
* Start the command (tr) and busy-wait for it to complete.
* This should only be used when interrupts are actually disabled (although it
* will work if they are not).
*/
static int
twe_immediate_request(struct twe_request *tr)
{
int error;
debug_called(4);
error = 0;
if ((error = twe_start(tr)) != 0)
return(error);
while (tr->tr_status == TWE_CMD_BUSY){
twe_done(tr->tr_sc);
}
return(tr->tr_status != TWE_CMD_COMPLETE);
}
/********************************************************************************
* Pull as much work off the softc's work queue as possible and give it to the
* controller.
*/
static void
twe_startio(struct twe_softc *sc)
{
struct twe_request *tr;
TWE_Command *cmd;
struct bio *bp;
int s, error;
debug_called(4);
/* spin until something prevents us from doing any work */
s = splbio();
for (;;) {
if (sc->twe_deferred == NULL) {
/* see if there's work to be done */
if ((bp = bioq_first(&sc->twe_bioq)) == NULL)
break;
/* get a command */
if ((tr = twe_get_request(sc)) == NULL)
break;
/* get the bio containing our work */
bioq_remove(&sc->twe_bioq, bp);
splx(s);
/* connect the bio to the command */
tr->tr_complete = twe_completeio;
tr->tr_private = bp;
tr->tr_data = bp->bio_data;
tr->tr_length = bp->bio_bcount;
cmd = &tr->tr_command;
#ifdef FREEBSD_4
if (bp->bio_flags & B_READ)
#else
if (bp->bio_cmd == BIO_READ)
#endif
{
tr->tr_flags |= TWE_CMD_DATAIN;
cmd->opcode = TWE_OP_READ;
} else {
tr->tr_flags |= TWE_CMD_DATAOUT;
cmd->opcode = TWE_OP_WRITE;
}
/* build a suitable I/O command (assumes 512-byte rounded transfers) */
cmd->sgl_offset = 3;
cmd->size = 3;
cmd->unit = ((struct twed_softc *)bp->bio_dev->si_drv1)->twed_drive->td_unit;
cmd->args.io.lba = bp->bio_pblkno;
cmd->count = (bp->bio_bcount + TWE_BLOCK_SIZE - 1) / TWE_BLOCK_SIZE;
/* map the command so the controller can work with it */
twe_map_request(tr);
} else {
/* we previously deferred a command, try to submit it again */
tr = sc->twe_deferred;
sc->twe_deferred = NULL;
}
/* try to give command to controller */
error = twe_start(tr);
if (error != 0) {
if (error == EBUSY) {
sc->twe_deferred = tr; /* try it again later */
break; /* don't try anything more for now */
}
/* otherwise, fail the command */
tr->tr_status = TWE_CMD_FAILED;
twe_completeio(tr);
}
s = splbio();
}
splx(s);
}
/********************************************************************************
* Handle completion of an I/O command.
*/
static void
twe_completeio(struct twe_request *tr)
{
TWE_Command *cmd;
struct twe_softc *sc = tr->tr_sc;
struct bio *bp = (struct bio *)tr->tr_private;
struct twed_softc *twed = (struct twed_softc *)bp->bio_dev->si_drv1;
debug_called(4);
if (tr->tr_status == TWE_CMD_COMPLETE) {
cmd = &tr->tr_command;
if (cmd->status != 0) {
bp->bio_error = EIO;
bp->bio_flags |= BIO_ERROR;
device_printf(twed->twed_dev, "command failed - 0x%x\n", cmd->status);
}
} else if (tr->tr_status == TWE_CMD_FAILED) { /* could be more verbose here? */
bp->bio_error = EIO;
bp->bio_flags |= BIO_ERROR;
device_printf(sc->twe_dev, "command failed submission - controller wedged\n");
}
twe_release_request(tr);
twed_intr(bp);
}
/********************************************************************************
********************************************************************************
Command I/O to Controller
********************************************************************************
********************************************************************************/
/********************************************************************************
* Try to deliver (tr) to the controller.
*
* Can be called at any interrupt level, with or without interrupts enabled.
*/
static int
twe_start(struct twe_request *tr)
{
struct twe_softc *sc = tr->tr_sc;
int i, s, done;
u_int32_t status_reg;
debug_called(4);
/* give the command a request ID */
if (twe_get_requestid(tr))
return(EBUSY); /* can't handle it now, try later */
/* mark the command as currently being processed */
tr->tr_status = TWE_CMD_BUSY;
/* spin briefly waiting for the controller to come ready */
for (i = 100000, done = 0; (i > 0) && !done; i--) {
s = splbio();
/* check to see if we can post a command */
status_reg = TWE_STATUS(sc);
twe_check_bits(sc, status_reg);
if (!(status_reg & TWE_STATUS_COMMAND_QUEUE_FULL)) {
TWE_COMMAND_QUEUE(sc, tr->tr_cmdphys);
done = 1;
/* move command to work queue */
TAILQ_INSERT_TAIL(&sc->twe_work, tr, tr_link);
if (tr->tr_complete != NULL) {
debug(3, "queued request %d with callback %p", tr->tr_command.request_id, tr->tr_complete);
} else if (tr->tr_private != NULL) {
debug(3, "queued request %d with wait channel %p", tr->tr_command.request_id, tr->tr_private);
} else {
debug(3, "queued request %d for polling caller", tr->tr_command.request_id);
}
}
splx(s); /* drop spl to allow completion interrupts */
}
/* command is enqueued */
if (done)
return(0);
/*
* We couldn't get the controller to take the command; try submitting it again later.
* This should only happen if something is wrong with the controller, or if we have
* overestimated the number of commands it can accept. (Should we actually reject
* the command at this point?)
*/
twe_release_requestid(tr);
return(EBUSY);
}
/********************************************************************************
* Poll the controller (sc) for completed commands.
*
* Can be called at any interrupt level, with or without interrupts enabled.
*/
static void
twe_done(struct twe_softc *sc)
{
TWE_Response_Queue rq;
struct twe_request *tr;
int s, found;
u_int32_t status_reg;
debug_called(5);
/* loop collecting completed commands */
found = 0;
s = splbio();
for (;;) {
status_reg = TWE_STATUS(sc);
twe_check_bits(sc, status_reg); /* XXX should this fail? */
if (!(status_reg & TWE_STATUS_RESPONSE_QUEUE_EMPTY)) {
found = 1;
rq = TWE_RESPONSE_QUEUE(sc);
tr = sc->twe_cmdlookup[rq.u.response_id]; /* find command */
if (tr != NULL) { /* paranoia */
tr->tr_status = TWE_CMD_COMPLETE;
debug(3, "completed request id %d with status %d", tr->tr_command.request_id, tr->tr_command.status);
twe_release_requestid(tr);
} else {
debug(2, "done event for nonbusy id %d\n", rq.u.response_id);
}
} else {
break; /* no response ready */
}
}
splx(s);
/* if we've completed any commands, try posting some more */
if (found)
twe_startio(sc);
/* handle completion and timeouts */
twe_complete(sc);
}
/********************************************************************************
* Perform post-completion processing for commands on (sc).
*
* This is split from twe_done as it can be safely deferred and run at a lower
* priority level should facilities for such a thing become available.
*/
static void
twe_complete(struct twe_softc *sc)
{
struct twe_request *tr, *nr;
int s;
debug_called(5);
s = splbio();
/*
* Scan the list of busy/done commands, dispatch them appropriately.
*/
tr = TAILQ_FIRST(&sc->twe_work);
while (tr != NULL) {
nr = TAILQ_NEXT(tr, tr_link);
/* command has been completed in some fashion */
if (tr->tr_status > TWE_CMD_BUSY) {
/* unmap the command's data buffer */
twe_unmap_request(tr);
/* remove from work list */
TAILQ_REMOVE(&sc->twe_work, tr, tr_link);
/* dispatch to suit command originator */
if (tr->tr_complete != NULL) { /* completion callback */
debug(2, "call completion handler %p", tr->tr_complete);
tr->tr_complete(tr);
} else if (tr->tr_private != NULL) { /* caller is asleep waiting */
debug(2, "wake up command owner on %p", tr->tr_private);
wakeup_one(tr->tr_private);
} else { /* caller is polling command */
debug(2, "command left for owner");
}
}
tr = nr;
}
splx(s);
}
/********************************************************************************
* Wait for (status) to be set in the controller status register for up to
* (timeout) seconds. Returns 0 if found, nonzero if we time out.
*
* Note: this busy-waits, rather than sleeping, since we may be called with
* eg. clock interrupts masked.
*/
static int
twe_wait_status(struct twe_softc *sc, u_int32_t status, int timeout)
{
time_t expiry;
u_int32_t status_reg;
debug_called(4);
expiry = time_second + timeout;
do {
status_reg = TWE_STATUS(sc);
if (status_reg & status) /* got the required bit(s)? */
return(0);
DELAY(100000);
} while (time_second <= expiry);
return(1);
}
/********************************************************************************
* Drain the response queue, which may contain responses to commands we know
* nothing about.
*/
static int
twe_drain_response_queue(struct twe_softc *sc)
{
TWE_Response_Queue rq;
u_int32_t status_reg;
debug_called(4);
for (;;) { /* XXX give up eventually? */
status_reg = TWE_STATUS(sc);
if (twe_check_bits(sc, status_reg))
return(1);
if (status_reg & TWE_STATUS_RESPONSE_QUEUE_EMPTY)
return(0);
rq = TWE_RESPONSE_QUEUE(sc);
}
}
/********************************************************************************
********************************************************************************
Interrupt Handling
********************************************************************************
********************************************************************************/
/********************************************************************************
* Host interrupt.
*
* XXX what does this mean?
*/
static void
twe_host_intr(struct twe_softc *sc)
{
debug_called(4);
device_printf(sc->twe_dev, "host interrupt\n");
TWE_CONTROL(sc, TWE_CONTROL_CLEAR_HOST_INTERRUPT);
}
/********************************************************************************
* Attention interrupt.
*
* Signalled when the controller has one or more AENs for us.
*/
static void
twe_attention_intr(struct twe_softc *sc)
{
debug_called(4);
/* instigate a poll for AENs */
if (twe_fetch_aen(sc)) {
device_printf(sc->twe_dev, "error polling for signalled AEN\n");
} else {
TWE_CONTROL(sc, TWE_CONTROL_CLEAR_ATTENTION_INTERRUPT);
}
}
/********************************************************************************
* Command interrupt.
*
* Signalled when the controller can handle more commands.
*/
static void
twe_command_intr(struct twe_softc *sc)
{
debug_called(4);
/*
* We don't use this, rather we try to submit commands when we receive
* them, and when other commands have completed. Mask it so we don't get
* another one.
*/
device_printf(sc->twe_dev, "command interrupt\n");
TWE_CONTROL(sc, TWE_CONTROL_MASK_COMMAND_INTERRUPT);
}
/********************************************************************************
* Enable the useful interrupts from the controller.
*/
static void
twe_enable_interrupts(struct twe_softc *sc)
{
sc->twe_state |= TWE_STATE_INTEN;
TWE_CONTROL(sc,
TWE_CONTROL_CLEAR_ATTENTION_INTERRUPT |
TWE_CONTROL_UNMASK_RESPONSE_INTERRUPT |
TWE_CONTROL_ENABLE_INTERRUPTS);
}
/********************************************************************************
* Disable interrupts from the controller.
*/
static void
twe_disable_interrupts(struct twe_softc *sc)
{
TWE_CONTROL(sc, TWE_CONTROL_DISABLE_INTERRUPTS);
sc->twe_state &= ~TWE_STATE_INTEN;
}
/********************************************************************************
********************************************************************************
Asynchronous Event Handling
********************************************************************************
********************************************************************************/
/********************************************************************************
* Request an AEN from the controller.
*/
static int
twe_fetch_aen(struct twe_softc *sc)
{
debug_called(4);
/* XXX ick, magic numbers */
if ((twe_get_param(sc, 0x401, 2, 2, twe_handle_aen)) == NULL)
return(EIO);
return(0);
}
/********************************************************************************
* Handle an AEN returned by the controller.
*/
static void
twe_handle_aen(struct twe_request *tr)
{
struct twe_softc *sc = tr->tr_sc;
TWE_Param *param;
u_int16_t aen;
debug_called(4);
/* XXX check for command success somehow? */
param = (TWE_Param *)tr->tr_data;
aen = *(u_int16_t *)(param->data);
free(tr->tr_data, M_DEVBUF);
twe_release_request(tr);
twe_enqueue_aen(sc, aen);
/* XXX poll for more AENs? */
}
/********************************************************************************
* Pull AENs out of the controller and park them in the queue, in a context where
* interrupts aren't active. Return nonzero if we encounter any errors in the
* process of obtaining all the available AENs.
*/
static int
twe_drain_aen_queue(struct twe_softc *sc)
{
TWE_Param *param;
u_int16_t aen;
for (;;) {
/* XXX ick, magic numbers */
param = twe_get_param(sc, 0x401, 2, 2, NULL);
if (param == NULL)
return(1);
aen = *(u_int16_t *)(param->data);
if (aen == TWE_AEN_QUEUE_EMPTY)
return(0);
twe_enqueue_aen(sc, aen);
}
}
/********************************************************************************
* Push an AEN that we've received onto the queue.
*
* Note that we have to lock this against reentrance, since it may be called
* from both interrupt and non-interrupt context.
*
* If someone is waiting for the AEN we have, wake them up.
*/
static void
twe_enqueue_aen(struct twe_softc *sc, u_int16_t aen)
{
int s, next;
debug_called(4);
debug(1, "queueing AEN <%s>", twe_name_aen(aen));
s = splbio();
/* enqueue the AEN */
next = ((sc->twe_aen_head + 1) % TWE_Q_LENGTH);
if (next != sc->twe_aen_tail) {
sc->twe_aen_queue[sc->twe_aen_head] = aen;
sc->twe_aen_head = next;
} else {
device_printf(sc->twe_dev, "AEN queue overflow, lost AEN <%s>\n", twe_name_aen(aen));
}
/* anyone looking for this AEN? */
if (sc->twe_wait_aen == aen) {
sc->twe_wait_aen = -1;
wakeup(&sc->twe_wait_aen);
}
splx(s);
}
#if 0
/********************************************************************************
* Pop an AEN off the queue, or return -1 if there are none left.
*
* We are more or less interrupt-safe, so don't block interrupts.
*/
static int
twe_dequeue_aen(struct twe_softc *sc)
{
int result;
debug_called(4);
if (sc->twe_aen_tail == sc->twe_aen_head) {
result = -1;
} else {
result = sc->twe_aen_queue[sc->twe_aen_tail];
sc->twe_aen_tail = ((sc->twe_aen_tail + 1) % TWE_Q_LENGTH);
}
return(result);
}
#endif
/********************************************************************************
* Check to see if the requested AEN is in the queue.
*
* XXX we could probably avoid masking interrupts here
*/
static int
twe_find_aen(struct twe_softc *sc, u_int16_t aen)
{
int i, s, missing;
missing = 1;
s = splbio();
for (i = sc->twe_aen_tail; (i != sc->twe_aen_head) && missing; i = (i + 1) % TWE_Q_LENGTH) {
if (sc->twe_aen_queue[i] == aen)
missing = 0;
}
return(missing);
}
#if 0 /* currently unused */
/********************************************************************************
* Sleep waiting for at least (timeout) seconds until we see (aen) as
* requested. Returns nonzero on timeout or failure.
*
* XXX: this should not be used in cases where there may be more than one sleeper
* without a mechanism for registering multiple sleepers.
*/
static int
twe_wait_aen(struct twe_softc *sc, int aen, int timeout)
{
time_t expiry;
int found, s;
debug_called(4);
expiry = time_second + timeout;
found = 0;
s = splbio();
sc->twe_wait_aen = aen;
do {
twe_fetch_aen(sc);
tsleep(&sc->twe_wait_aen, PZERO, "twewaen", hz);
if (sc->twe_wait_aen == -1)
found = 1;
} while ((time_second <= expiry) && !found);
splx(s);
return(!found);
}
#endif
/********************************************************************************
********************************************************************************
Command Buffer Management
********************************************************************************
********************************************************************************/
/********************************************************************************
* Get a new command buffer.
*
* This may return NULL in low-memory cases.
*
* Note that using malloc() is expensive (the command buffer is << 1 page) but
* necessary if we are to be a loadable module before the zone allocator is fixed.
* On the other hand, using malloc ensures that the command structure at the top
* of the request is aligned within the controller's constraints (64 bytes).
*
* If possible, we recycle a command buffer that's been used before.
*
* XXX currently, commands are mapped into controller space just before being
* handed to the controller. It may be more efficient to do that here.
*/
static struct twe_request *
twe_get_request(struct twe_softc *sc)
{
struct twe_request *tr;
int s, error;
debug_called(4);
/* try to reuse an old buffer */
s = splbio();
if ((tr = TAILQ_FIRST(&sc->twe_freecmds)) != NULL)
TAILQ_REMOVE(&sc->twe_freecmds, tr, tr_link);
splx(s);
/* allocate a new command buffer? */
if (tr == NULL) {
tr = (struct twe_request *)malloc(sizeof(*tr), M_DEVBUF, M_NOWAIT);
if (tr != NULL) {
bzero(tr, sizeof(*tr));
tr->tr_sc = sc;
error = bus_dmamap_create(sc->twe_buffer_dmat, 0, &tr->tr_cmdmap);
if (error) {
free(tr, M_DEVBUF);
return(NULL);
}
error = bus_dmamap_create(sc->twe_buffer_dmat, 0, &tr->tr_dmamap);
if (error) {
bus_dmamap_destroy(sc->twe_buffer_dmat, tr->tr_cmdmap);
free(tr, M_DEVBUF);
return(NULL);
}
}
}
/* initialise some fields to their defaults */
tr->tr_status = TWE_CMD_SETUP; /* command is in setup phase */
tr->tr_flags = 0;
tr->tr_command.host_id = 0; /* not used */
tr->tr_command.status = 0; /* before submission to controller */
tr->tr_command.flags = 0; /* not used */
return(tr);
}
/********************************************************************************
* Release a command buffer for recycling.
*
* XXX It might be a good idea to limit the number of commands we save for reuse
* if it's shown that this list bloats out massively.
*/
static void
twe_release_request(struct twe_request *tr)
{
int s;
debug_called(4);
s = splbio();
TAILQ_INSERT_HEAD(&tr->tr_sc->twe_freecmds, tr, tr_link);
splx(s);
}
/********************************************************************************
* Permanently discard a command buffer.
*/
static void
twe_free_request(struct twe_request *tr)
{
struct twe_softc *sc = tr->tr_sc;
debug_called(4);
bus_dmamap_destroy(sc->twe_buffer_dmat, tr->tr_cmdmap);
bus_dmamap_destroy(sc->twe_buffer_dmat, tr->tr_dmamap);
free(tr, M_DEVBUF);
}
/********************************************************************************
* Allocate a request ID for a command about to be submitted.
*/
static int
twe_get_requestid(struct twe_request *tr)
{
struct twe_softc *sc = tr->tr_sc;
int i, s, result;
debug_called(4);
s = splbio();
result = 1;
/* XXX linear search is slow */
for (i = 0; i < TWE_Q_LENGTH; i++) {
if (sc->twe_cmdlookup[i] == NULL) {
tr->tr_command.request_id = i;
sc->twe_cmdlookup[i] = tr;
result = 0;
break;
}
}
splx(s);
return(result);
}
/********************************************************************************
* Free a command's request ID for reuse.
*/
static void
twe_release_requestid(struct twe_request *tr)
{
struct twe_softc *sc = tr->tr_sc;
debug_called(4);
sc->twe_cmdlookup[tr->tr_command.request_id] = 0; /* XXX atomic? */
}
/********************************************************************************
* Map/unmap (tr)'s command and data in the controller's addressable space.
*
* These routines ensure that the data which the controller is going to try to
* access is actually visible to the controller, in a machine-independant
* fasion. Due to a hardware limitation, I/O buffers must be 512-byte aligned
* and we take care of that here as well.
*/
static void
twe_setup_data_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error)
{
struct twe_request *tr = (struct twe_request *)arg;
TWE_Command *cmd = &tr->tr_command;
int i;
debug_called(4);
/* save base of first segment in command (applicable if there only one segment) */
tr->tr_dataphys = segs[0].ds_addr;
/* correct command size for s/g list size */
tr->tr_command.size += 2 * nsegments;
/*
* Due to the fact that parameter and I/O commands have the scatter/gather list in
* different places, we need to determine which sort of command this actually is
* before we can populate it correctly.
*/
switch(cmd->sgl_offset) {
case 2:
for (i = 0; i < nsegments; i++) {
cmd->args.param.sgl[i].address = segs[i].ds_addr;
cmd->args.param.sgl[i].length = segs[i].ds_len;
}
for (; i < TWE_MAX_SGL_LENGTH; i++) { /* XXX necessary? */
cmd->args.param.sgl[i].address = 0;
cmd->args.param.sgl[i].length = 0;
}
break;
case 3:
for (i = 0; i < nsegments; i++) {
cmd->args.io.sgl[i].address = segs[i].ds_addr;
cmd->args.io.sgl[i].length = segs[i].ds_len;
}
for (; i < TWE_MAX_SGL_LENGTH; i++) { /* XXX necessary? */
cmd->args.io.sgl[i].address = 0;
cmd->args.io.sgl[i].length = 0;
}
break;
default:
/* no s/g list, nothing to do */
}
}
static void
twe_setup_request_dmamap(void *arg, bus_dma_segment_t *segs, int nsegments, int error)
{
struct twe_request *tr = (struct twe_request *)arg;
debug_called(4);
/* command can't cross a page boundary */
tr->tr_cmdphys = segs[0].ds_addr;
}
static void
twe_map_request(struct twe_request *tr)
{
struct twe_softc *sc = tr->tr_sc;
debug_called(4);
/*
* Map the command into bus space.
*/
bus_dmamap_load(sc->twe_buffer_dmat, tr->tr_cmdmap, &tr->tr_command, sizeof(tr->tr_command),
twe_setup_request_dmamap, tr, 0);
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_cmdmap, BUS_DMASYNC_PREWRITE);
/*
* If the command involves data, map that too.
*/
if (tr->tr_data != NULL) {
/*
* Data must be 64-byte aligned; allocate a fixup buffer if it's not.
*/
if (((vm_offset_t)tr->tr_data % TWE_ALIGNMENT) != 0) {
tr->tr_realdata = tr->tr_data; /* save pointer to 'real' data */
tr->tr_flags |= TWE_CMD_ALIGNBUF;
tr->tr_data = malloc(tr->tr_length, M_DEVBUF, M_NOWAIT); /* XXX check result here */
}
/*
* Map the data buffer into bus space and build the s/g list.
*/
bus_dmamap_load(sc->twe_buffer_dmat, tr->tr_dmamap, tr->tr_data, tr->tr_length,
twe_setup_data_dmamap, tr, 0);
if (tr->tr_flags & TWE_CMD_DATAIN)
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_dmamap, BUS_DMASYNC_PREREAD);
if (tr->tr_flags & TWE_CMD_DATAOUT) {
/* if we're using an alignment buffer, and we're writing data, copy the real data out */
if (tr->tr_flags & TWE_CMD_ALIGNBUF)
bcopy(tr->tr_realdata, tr->tr_data, tr->tr_length);
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_dmamap, BUS_DMASYNC_PREWRITE);
}
}
}
static void
twe_unmap_request(struct twe_request *tr)
{
struct twe_softc *sc = tr->tr_sc;
debug_called(4);
/*
* Unmap the command from bus space.
*/
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_cmdmap, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->twe_buffer_dmat, tr->tr_cmdmap);
/*
* If the command involved data, unmap that too.
*/
if (tr->tr_data != NULL) {
if (tr->tr_flags & TWE_CMD_DATAIN) {
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_dmamap, BUS_DMASYNC_POSTREAD);
/* if we're using an alignment buffer, and we're reading data, copy the real data in */
if (tr->tr_flags & TWE_CMD_ALIGNBUF)
bcopy(tr->tr_data, tr->tr_realdata, tr->tr_length);
}
if (tr->tr_flags & TWE_CMD_DATAOUT)
bus_dmamap_sync(sc->twe_buffer_dmat, tr->tr_dmamap, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->twe_buffer_dmat, tr->tr_dmamap);
}
/* free alignment buffer if it was used */
if (tr->tr_flags & TWE_CMD_ALIGNBUF) {
free(tr->tr_data, M_DEVBUF);
tr->tr_data = tr->tr_realdata; /* restore 'real' data pointer */
}
}
/********************************************************************************
********************************************************************************
Debugging
********************************************************************************
********************************************************************************/
/********************************************************************************
* Complain if the status bits aren't what we're expecting.
*/
static int
twe_check_bits(struct twe_softc *sc, u_int32_t status_reg)
{
int result;
result = 0;
if ((status_reg & TWE_STATUS_EXPECTED_BITS) != TWE_STATUS_EXPECTED_BITS) {
device_printf(sc->twe_dev, "missing expected status bit(s) %b\n", ~status_reg & TWE_STATUS_EXPECTED_BITS,
TWE_STATUS_BITS_DESCRIPTION);
result = 1;
}
if ((status_reg & TWE_STATUS_UNEXPECTED_BITS) != 0) {
device_printf(sc->twe_dev, "unexpected status bit(s) %b\n", status_reg & TWE_STATUS_UNEXPECTED_BITS,
TWE_STATUS_BITS_DESCRIPTION);
result = 1;
}
return(result);
}
/********************************************************************************
* Return a string naming (aen).
*/
static struct {
u_int16_t aen;
char *desc;
} twe_aen_names[] = {
{0x0000, "queue empty"},
{0x0001, "soft reset"},
{0x0002, "degraded mirror"},
{0x0003, "controller error"},
{0x0004, "rebuild fail"},
{0x0005, "rebuild done"},
{0x00ff, "aen queue full"},
{0, NULL}
};
static char *
twe_name_aen(u_int16_t aen)
{
int i;
static char buf[16];
for (i = 0; twe_aen_names[i].desc != NULL; i++)
if (twe_aen_names[i].aen == aen)
return(twe_aen_names[i].desc);
sprintf(buf, "0x%x", aen);
return(buf);
}
#if 0
/********************************************************************************
* Return a string naming (opcode).
*/
static struct {
u_int8_t opcode;
char *desc;
} twe_opcode_names[] = {
{0x00, "nop"},
{0x01, "init connection"},
{0x02, "read"},
{0x03, "write"},
{0x04, "verify"},
{0x12, "get param"},
{0x13, "set param"},
{0x1a, "sector info"},
{0x1c, "listen"},
{0, NULL}
};
static char *
twe_name_opcode(u_int8_t opcode)
{
int i;
static char buf[16];
for (i = 0; twe_opcode_names[i].desc != NULL; i++)
if (twe_opcode_names[i].opcode == opcode)
return(twe_opcode_names[i].desc);
sprintf(buf, "0x%x", opcode);
return(buf);
}
/********************************************************************************
* Print a request/command in human-readable format.
*/
static void
twe_print_request(struct twe_request *tr)
{
device_t dev = tr->tr_sc->twe_dev;
TWE_Command *cmd = &tr->tr_command;
int i;
device_printf(dev, "CMD: request_id %d opcode <%s> size %d unit %d host_id %d\n",
cmd->request_id, twe_name_opcode(cmd->opcode), cmd->size, cmd->unit, cmd->host_id);
device_printf(dev, " status %d flags 0x%x count %d sgl_offset %d\n",
cmd->status, cmd->flags, cmd->count, cmd->sgl_offset);
switch(cmd->sgl_offset) {
case 3:
device_printf(dev, " lba %d\n", cmd->args.io.lba);
for (i = 0; (i < TWE_MAX_SGL_LENGTH) && (cmd->args.io.sgl[i].length != 0); i++)
device_printf(dev, " %d: 0x%x/%d\n",
i, cmd->args.io.sgl[i].address, cmd->args.io.sgl[i].length);
break;
case 2:
for (i = 0; (i < TWE_MAX_SGL_LENGTH) && (cmd->args.param.sgl[i].length != 0); i++)
device_printf(dev, " %d: 0x%x/%d\n",
i, cmd->args.param.sgl[i].address, cmd->args.param.sgl[i].length);
break;
default:
device_printf(dev, " response queue pointer 0x%x\n",
cmd->args.init_connection.response_queue_pointer);
}
device_printf(dev, " tr_command %p/0x%x tr_data %p/0x%x,%d\n",
tr, tr->tr_cmdphys, tr->tr_data, tr->tr_dataphys, tr->tr_length);
device_printf(dev, " tr_status %d tr_flags 0x%x tr_complete %p tr_private %p\n",
tr->tr_status, tr->tr_flags, tr->tr_complete, tr->tr_private);
}
/********************************************************************************
* Print current controller status, call from DDB.
*/
void
twe_report(void)
{
u_int32_t status_reg;
struct twe_softc *sc;
int i, s;
s = splbio();
for (i = 0; (sc = devclass_get_softc(twe_devclass, i)) != NULL; i++) {
status_reg = TWE_STATUS(sc);
device_printf(sc->twe_dev, "status %b\n", status_reg, TWE_STATUS_BITS_DESCRIPTION);
}
splx(s);
}
#endif