d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
0a9cc964a1
freebsd-nq/sys/dev/sdhci/sdhci.h
Ilya Bakulin d91f1a1094 Rename sdhci_cam_start_slot() into sdhci_start_slot() 
This change allows to just call sdhci_start_slot() in SDHCI drivers
and not to think about which stack handles the operation.

As a side effect, this will also fix MMCCAM with sdhci_acpi driver.

Approved by:	imp (mentor)
Differential Revision:	https://reviews.freebsd.org/D12471
2017-09-24 09:05:35 +00:00

434 lines
16 KiB
C
Raw Blame History

/*-
* Copyright (c) 2008 Alexander Motin <mav@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef __SDHCI_H__
#define __SDHCI_H__
#include "opt_mmccam.h"
#define DMA_BLOCK_SIZE 4096
#define DMA_BOUNDARY 0 /* DMA reload every 4K */
/* Controller doesn't honor resets unless we touch the clock register */
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1 << 0)
/* Controller really supports DMA */
#define SDHCI_QUIRK_FORCE_DMA (1 << 1)
/* Controller has unusable DMA engine */
#define SDHCI_QUIRK_BROKEN_DMA (1 << 2)
/* Controller doesn't like to be reset when there is no card inserted. */
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1 << 3)
/* Controller has flaky internal state so reset it on each ios change */
#define SDHCI_QUIRK_RESET_ON_IOS (1 << 4)
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
#define SDHCI_QUIRK_32BIT_DMA_SIZE (1 << 5)
/* Controller needs to be reset after each request to stay stable */
#define SDHCI_QUIRK_RESET_AFTER_REQUEST (1 << 6)
/* Controller has an off-by-one issue with timeout value */
#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1 << 7)
/* Controller has broken read timings */
#define SDHCI_QUIRK_BROKEN_TIMINGS (1 << 8)
/* Controller needs lowered frequency */
#define SDHCI_QUIRK_LOWER_FREQUENCY (1 << 9)
/* Data timeout is invalid, should use SD clock */
#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1 << 10)
/* Timeout value is invalid, should be overriden */
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1 << 11)
/* SDHCI_CAPABILITIES is invalid */
#define SDHCI_QUIRK_MISSING_CAPS (1 << 12)
/* Hardware shifts the 136-bit response, don't do it in software. */
#define SDHCI_QUIRK_DONT_SHIFT_RESPONSE (1 << 13)
/* Wait to see reset bit asserted before waiting for de-asserted */
#define SDHCI_QUIRK_WAITFOR_RESET_ASSERTED (1 << 14)
/* Leave controller in standard mode when putting card in HS mode. */
#define SDHCI_QUIRK_DONT_SET_HISPD_BIT (1 << 15)
/* Alternate clock source is required when supplying a 400 KHz clock. */
#define SDHCI_QUIRK_BCM577XX_400KHZ_CLKSRC (1 << 16)
/* Card insert/remove interrupts don't work, polling required. */
#define SDHCI_QUIRK_POLL_CARD_PRESENT (1 << 17)
/* All controller slots are non-removable. */
#define SDHCI_QUIRK_ALL_SLOTS_NON_REMOVABLE (1 << 18)
/* Issue custom Intel controller reset sequence after power-up. */
#define SDHCI_QUIRK_INTEL_POWER_UP_RESET (1 << 19)
/* Data timeout is invalid, use 1 MHz clock instead. */
#define SDHCI_QUIRK_DATA_TIMEOUT_1MHZ (1 << 20)
/* Controller doesn't allow access boot partitions. */
#define SDHCI_QUIRK_BOOT_NOACC (1 << 21)
/* Controller waits for busy responses. */
#define SDHCI_QUIRK_WAIT_WHILE_BUSY (1 << 22)
/* Controller supports eMMC DDR52 mode. */
#define SDHCI_QUIRK_MMC_DDR52 (1 << 23)
/* Controller support for UHS DDR50 mode is broken. */
#define SDHCI_QUIRK_BROKEN_UHS_DDR50 (1 << 24)
/* Controller support for eMMC HS200 mode is broken. */
#define SDHCI_QUIRK_BROKEN_MMC_HS200 (1 << 25)
/* Controller reports support for eMMC HS400 mode as SDHCI_CAN_MMC_HS400. */
#define SDHCI_QUIRK_CAPS_BIT63_FOR_MMC_HS400 (1 << 26)
/* Controller support for SDHCI_CTRL2_PRESET_VALUE is broken. */
#define SDHCI_QUIRK_PRESET_VALUE_BROKEN (1 << 27)
/* Controller does not support or the support for ACMD12 is broken. */
#define SDHCI_QUIRK_BROKEN_AUTO_STOP (1 << 28)
/*
* Controller registers
*/
#define SDHCI_DMA_ADDRESS 0x00
#define SDHCI_BLOCK_SIZE 0x04
#define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))
#define SDHCI_BLOCK_COUNT 0x06
#define SDHCI_ARGUMENT 0x08
#define SDHCI_TRANSFER_MODE 0x0C
#define SDHCI_TRNS_DMA 0x01
#define SDHCI_TRNS_BLK_CNT_EN 0x02
#define SDHCI_TRNS_ACMD12 0x04
#define SDHCI_TRNS_READ 0x10
#define SDHCI_TRNS_MULTI 0x20
#define SDHCI_COMMAND_FLAGS 0x0E
#define SDHCI_CMD_RESP_NONE 0x00
#define SDHCI_CMD_RESP_LONG 0x01
#define SDHCI_CMD_RESP_SHORT 0x02
#define SDHCI_CMD_RESP_SHORT_BUSY 0x03
#define SDHCI_CMD_RESP_MASK 0x03
#define SDHCI_CMD_CRC 0x08
#define SDHCI_CMD_INDEX 0x10
#define SDHCI_CMD_DATA 0x20
#define SDHCI_CMD_TYPE_NORMAL 0x00
#define SDHCI_CMD_TYPE_SUSPEND 0x40
#define SDHCI_CMD_TYPE_RESUME 0x80
#define SDHCI_CMD_TYPE_ABORT 0xc0
#define SDHCI_CMD_TYPE_MASK 0xc0
#define SDHCI_COMMAND 0x0F
#define SDHCI_RESPONSE 0x10
#define SDHCI_BUFFER 0x20
#define SDHCI_PRESENT_STATE 0x24
#define SDHCI_CMD_INHIBIT 0x00000001
#define SDHCI_DAT_INHIBIT 0x00000002
#define SDHCI_DAT_ACTIVE 0x00000004
#define SDHCI_RETUNE_REQUEST 0x00000008
#define SDHCI_DOING_WRITE 0x00000100
#define SDHCI_DOING_READ 0x00000200
#define SDHCI_SPACE_AVAILABLE 0x00000400
#define SDHCI_DATA_AVAILABLE 0x00000800
#define SDHCI_CARD_PRESENT 0x00010000
#define SDHCI_CARD_STABLE 0x00020000
#define SDHCI_CARD_PIN 0x00040000
#define SDHCI_WRITE_PROTECT 0x00080000
#define SDHCI_STATE_DAT_MASK 0x00f00000
#define SDHCI_STATE_CMD 0x01000000
#define SDHCI_HOST_CONTROL 0x28
#define SDHCI_CTRL_LED 0x01
#define SDHCI_CTRL_4BITBUS 0x02
#define SDHCI_CTRL_HISPD 0x04
#define SDHCI_CTRL_SDMA 0x08
#define SDHCI_CTRL_ADMA2 0x10
#define SDHCI_CTRL_ADMA264 0x18
#define SDHCI_CTRL_DMA_MASK 0x18
#define SDHCI_CTRL_8BITBUS 0x20
#define SDHCI_CTRL_CARD_DET 0x40
#define SDHCI_CTRL_FORCE_CARD 0x80
#define SDHCI_POWER_CONTROL 0x29
#define SDHCI_POWER_ON 0x01
#define SDHCI_POWER_180 0x0A
#define SDHCI_POWER_300 0x0C
#define SDHCI_POWER_330 0x0E
#define SDHCI_BLOCK_GAP_CONTROL 0x2A
#define SDHCI_WAKE_UP_CONTROL 0x2B
#define SDHCI_CLOCK_CONTROL 0x2C
#define SDHCI_DIVIDER_MASK 0xff
#define SDHCI_DIVIDER_MASK_LEN 8
#define SDHCI_DIVIDER_SHIFT 8
#define SDHCI_DIVIDER_HI_MASK 3
#define SDHCI_DIVIDER_HI_SHIFT 6
#define SDHCI_CLOCK_CARD_EN 0x0004
#define SDHCI_CLOCK_INT_STABLE 0x0002
#define SDHCI_CLOCK_INT_EN 0x0001
#define SDHCI_DIVIDERS_MASK \
((SDHCI_DIVIDER_MASK << SDHCI_DIVIDER_SHIFT) | \
(SDHCI_DIVIDER_HI_MASK << SDHCI_DIVIDER_HI_SHIFT))
#define SDHCI_TIMEOUT_CONTROL 0x2E
#define SDHCI_SOFTWARE_RESET 0x2F
#define SDHCI_RESET_ALL 0x01
#define SDHCI_RESET_CMD 0x02
#define SDHCI_RESET_DATA 0x04
#define SDHCI_INT_STATUS 0x30
#define SDHCI_INT_ENABLE 0x34
#define SDHCI_SIGNAL_ENABLE 0x38
#define SDHCI_INT_RESPONSE 0x00000001
#define SDHCI_INT_DATA_END 0x00000002
#define SDHCI_INT_BLOCK_GAP 0x00000004
#define SDHCI_INT_DMA_END 0x00000008
#define SDHCI_INT_SPACE_AVAIL 0x00000010
#define SDHCI_INT_DATA_AVAIL 0x00000020
#define SDHCI_INT_CARD_INSERT 0x00000040
#define SDHCI_INT_CARD_REMOVE 0x00000080
#define SDHCI_INT_CARD_INT 0x00000100
#define SDHCI_INT_INT_A 0x00000200
#define SDHCI_INT_INT_B 0x00000400
#define SDHCI_INT_INT_C 0x00000800
#define SDHCI_INT_RETUNE 0x00001000
#define SDHCI_INT_ERROR 0x00008000
#define SDHCI_INT_TIMEOUT 0x00010000
#define SDHCI_INT_CRC 0x00020000
#define SDHCI_INT_END_BIT 0x00040000
#define SDHCI_INT_INDEX 0x00080000
#define SDHCI_INT_DATA_TIMEOUT 0x00100000
#define SDHCI_INT_DATA_CRC 0x00200000
#define SDHCI_INT_DATA_END_BIT 0x00400000
#define SDHCI_INT_BUS_POWER 0x00800000
#define SDHCI_INT_ACMD12ERR 0x01000000
#define SDHCI_INT_ADMAERR 0x02000000
#define SDHCI_INT_TUNEERR 0x04000000
#define SDHCI_INT_NORMAL_MASK 0x00007FFF
#define SDHCI_INT_ERROR_MASK 0xFFFF8000
#define SDHCI_INT_CMD_ERROR_MASK (SDHCI_INT_TIMEOUT | \
SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
#define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_CMD_ERROR_MASK)
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
SDHCI_INT_DATA_END_BIT)
#define SDHCI_ACMD12_ERR 0x3C
#define SDHCI_HOST_CONTROL2 0x3E
#define SDHCI_CTRL2_PRESET_VALUE 0x8000
#define SDHCI_CTRL2_ASYNC_INTR 0x4000
#define SDHCI_CTRL2_64BIT_ENABLE 0x2000
#define SDHCI_CTRL2_HOST_V4_ENABLE 0x1000
#define SDHCI_CTRL2_CMD23_ENABLE 0x0800
#define SDHCI_CTRL2_ADMA2_LENGTH_MODE 0x0400
#define SDHCI_CTRL2_UHS2_IFACE_ENABLE 0x0100
#define SDHCI_CTRL2_SAMPLING_CLOCK 0x0080
#define SDHCI_CTRL2_EXEC_TUNING 0x0040
#define SDHCI_CTRL2_DRIVER_TYPE_MASK 0x0030
#define SDHCI_CTRL2_DRIVER_TYPE_B 0x0000
#define SDHCI_CTRL2_DRIVER_TYPE_A 0x0010
#define SDHCI_CTRL2_DRIVER_TYPE_C 0x0020
#define SDHCI_CTRL2_DRIVER_TYPE_D 0x0030
#define SDHCI_CTRL2_S18_ENABLE 0x0008
#define SDHCI_CTRL2_UHS_MASK 0x0007
#define SDHCI_CTRL2_UHS_SDR12 0x0000
#define SDHCI_CTRL2_UHS_SDR25 0x0001
#define SDHCI_CTRL2_UHS_SDR50 0x0002
#define SDHCI_CTRL2_UHS_SDR104 0x0003
#define SDHCI_CTRL2_UHS_DDR50 0x0004
#define SDHCI_CTRL2_MMC_HS400 0x0005 /* non-standard */
#define SDHCI_CAPABILITIES 0x40
#define SDHCI_TIMEOUT_CLK_MASK 0x0000003F
#define SDHCI_TIMEOUT_CLK_SHIFT 0
#define SDHCI_TIMEOUT_CLK_UNIT 0x00000080
#define SDHCI_CLOCK_BASE_MASK 0x00003F00
#define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00
#define SDHCI_CLOCK_BASE_SHIFT 8
#define SDHCI_MAX_BLOCK_MASK 0x00030000
#define SDHCI_MAX_BLOCK_SHIFT 16
#define SDHCI_CAN_DO_8BITBUS 0x00040000
#define SDHCI_CAN_DO_ADMA2 0x00080000
#define SDHCI_CAN_DO_HISPD 0x00200000
#define SDHCI_CAN_DO_DMA 0x00400000
#define SDHCI_CAN_DO_SUSPEND 0x00800000
#define SDHCI_CAN_VDD_330 0x01000000
#define SDHCI_CAN_VDD_300 0x02000000
#define SDHCI_CAN_VDD_180 0x04000000
#define SDHCI_CAN_DO_64BIT 0x10000000
#define SDHCI_CAN_ASYNC_INTR 0x20000000
#define SDHCI_SLOTTYPE_MASK 0xC0000000
#define SDHCI_SLOTTYPE_REMOVABLE 0x00000000
#define SDHCI_SLOTTYPE_EMBEDDED 0x40000000
#define SDHCI_SLOTTYPE_SHARED 0x80000000
#define SDHCI_CAPABILITIES2 0x44
#define SDHCI_CAN_SDR50 0x00000001
#define SDHCI_CAN_SDR104 0x00000002
#define SDHCI_CAN_DDR50 0x00000004
#define SDHCI_CAN_DRIVE_TYPE_A 0x00000010
#define SDHCI_CAN_DRIVE_TYPE_C 0x00000020
#define SDHCI_CAN_DRIVE_TYPE_D 0x00000040
#define SDHCI_RETUNE_CNT_MASK 0x00000F00
#define SDHCI_RETUNE_CNT_SHIFT 8
#define SDHCI_TUNE_SDR50 0x00002000
#define SDHCI_RETUNE_MODES_MASK 0x0000C000
#define SDHCI_RETUNE_MODES_SHIFT 14
#define SDHCI_CLOCK_MULT_MASK 0x00FF0000
#define SDHCI_CLOCK_MULT_SHIFT 16
#define SDHCI_CAN_MMC_HS400 0x80000000 /* non-standard */
#define SDHCI_MAX_CURRENT 0x48
#define SDHCI_FORCE_AUTO_EVENT 0x50
#define SDHCI_FORCE_INTR_EVENT 0x52
#define SDHCI_ADMA_ERR 0x54
#define SDHCI_ADMA_ERR_LENGTH 0x04
#define SDHCI_ADMA_ERR_STATE_MASK 0x03
#define SDHCI_ADMA_ERR_STATE_STOP 0x00
#define SDHCI_ADMA_ERR_STATE_FDS 0x01
#define SDHCI_ADMA_ERR_STATE_TFR 0x03
#define SDHCI_ADMA_ADDRESS_LO 0x58
#define SDHCI_ADMA_ADDRESS_HI 0x5C
#define SDHCI_PRESET_VALUE 0x60
#define SDHCI_SHARED_BUS_CTRL 0xE0
#define SDHCI_SLOT_INT_STATUS 0xFC
#define SDHCI_HOST_VERSION 0xFE
#define SDHCI_VENDOR_VER_MASK 0xFF00
#define SDHCI_VENDOR_VER_SHIFT 8
#define SDHCI_SPEC_VER_MASK 0x00FF
#define SDHCI_SPEC_VER_SHIFT 0
#define SDHCI_SPEC_100 0
#define SDHCI_SPEC_200 1
#define SDHCI_SPEC_300 2
#define SDHCI_SPEC_400 3
#define SDHCI_SPEC_410 4
#define SDHCI_SPEC_420 5
SYSCTL_DECL(_hw_sdhci);
extern u_int sdhci_quirk_clear;
extern u_int sdhci_quirk_set;
struct sdhci_slot {
struct mtx mtx; /* Slot mutex */
u_int quirks; /* Chip specific quirks */
u_int caps; /* Override SDHCI_CAPABILITIES */
u_int caps2; /* Override SDHCI_CAPABILITIES2 */
device_t bus; /* Bus device */
device_t dev; /* Slot device */
u_char num; /* Slot number */
u_char opt; /* Slot options */
#define SDHCI_HAVE_DMA 0x01
#define SDHCI_PLATFORM_TRANSFER 0x02
#define SDHCI_NON_REMOVABLE 0x04
#define SDHCI_TUNING_SUPPORTED 0x08
#define SDHCI_TUNING_ENABLED 0x10
#define SDHCI_SDR50_NEEDS_TUNING 0x20
#define SDHCI_SLOT_EMBEDDED 0x40
u_char version;
int timeout; /* Transfer timeout */
uint32_t max_clk; /* Max possible freq */
uint32_t timeout_clk; /* Timeout freq */
bus_dma_tag_t dmatag;
bus_dmamap_t dmamap;
u_char *dmamem;
bus_addr_t paddr; /* DMA buffer address */
struct task card_task; /* Card presence check task */
struct timeout_task
card_delayed_task;/* Card insert delayed task */
struct callout card_poll_callout;/* Card present polling callout */
struct callout timeout_callout;/* Card command/data response timeout */
struct callout retune_callout; /* Re-tuning mode 1 callout */
struct mmc_host host; /* Host parameters */
struct mmc_request *req; /* Current request */
struct mmc_command *curcmd; /* Current command of current request */
struct mmc_request *tune_req; /* Tuning request */
struct mmc_command *tune_cmd; /* Tuning command of tuning request */
struct mmc_data *tune_data; /* Tuning data of tuning command */
uint32_t retune_ticks; /* Re-tuning callout ticks [hz] */
uint32_t intmask; /* Current interrupt mask */
uint32_t clock; /* Current clock freq. */
size_t offset; /* Data buffer offset */
uint8_t hostctrl; /* Current host control register */
uint8_t retune_count; /* Controller re-tuning count [s] */
uint8_t retune_mode; /* Controller re-tuning mode */
#define SDHCI_RETUNE_MODE_1 0x00
#define SDHCI_RETUNE_MODE_2 0x01
#define SDHCI_RETUNE_MODE_3 0x02
uint8_t retune_req; /* Re-tuning request status */
#define SDHCI_RETUNE_REQ_NEEDED 0x01 /* Re-tuning w/o circuit reset needed */
#define SDHCI_RETUNE_REQ_RESET 0x02 /* Re-tuning w/ circuit reset needed */
u_char power; /* Current power */
u_char bus_busy; /* Bus busy status */
u_char cmd_done; /* CMD command part done flag */
u_char data_done; /* DAT command part done flag */
u_char flags; /* Request execution flags */
#define CMD_STARTED 1
#define STOP_STARTED 2
#define SDHCI_USE_DMA 4 /* Use DMA for this req. */
#define PLATFORM_DATA_STARTED 8 /* Data xfer is handled by platform */
#ifdef MMCCAM
/* CAM stuff */
union ccb *ccb;
struct cam_devq *devq;
struct cam_sim *sim;
struct mtx sim_mtx;
u_char card_present; /* XXX Maybe derive this from elsewhere? */
#endif
};
int sdhci_generic_read_ivar(device_t bus, device_t child, int which,
uintptr_t *result);
int sdhci_generic_write_ivar(device_t bus, device_t child, int which,
uintptr_t value);
int sdhci_init_slot(device_t dev, struct sdhci_slot *slot, int num);
void sdhci_start_slot(struct sdhci_slot *slot);
/* performs generic clean-up for platform transfers */
void sdhci_finish_data(struct sdhci_slot *slot);
int sdhci_cleanup_slot(struct sdhci_slot *slot);
int sdhci_generic_suspend(struct sdhci_slot *slot);
int sdhci_generic_resume(struct sdhci_slot *slot);
int sdhci_generic_update_ios(device_t brdev, device_t reqdev);
int sdhci_generic_tune(device_t brdev, device_t reqdev, bool hs400);
int sdhci_generic_switch_vccq(device_t brdev, device_t reqdev);
int sdhci_generic_retune(device_t brdev, device_t reqdev, bool reset);
int sdhci_generic_request(device_t brdev, device_t reqdev,
struct mmc_request *req);
int sdhci_generic_get_ro(device_t brdev, device_t reqdev);
int sdhci_generic_acquire_host(device_t brdev, device_t reqdev);
int sdhci_generic_release_host(device_t brdev, device_t reqdev);
void sdhci_generic_intr(struct sdhci_slot *slot);
uint32_t sdhci_generic_min_freq(device_t brdev, struct sdhci_slot *slot);
bool sdhci_generic_get_card_present(device_t brdev, struct sdhci_slot *slot);
void sdhci_generic_set_uhs_timing(device_t brdev, struct sdhci_slot *slot);
void sdhci_handle_card_present(struct sdhci_slot *slot, bool is_present);
#endif /* __SDHCI_H__ */
Reference in New Issue View Git Blame Copy Permalink