freebsd-nq/sys/dev/lnc/if_lnc_pci.c
Paul Richards 8fcbbfe4a3 The pci and isa drivers were meant to share the same devclass but
the devclass definitions were all wrong so they had their own private
ones with the same name.

Fix it so they all use the same global devclass.
2000-12-29 11:59:41 +00:00

221 lines
6.1 KiB
C

/*
* Copyright (c) 1994-2000
* Paul Richards. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* verbatim and that no modifications are made prior to this
* point in the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name Paul Richards may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY PAUL RICHARDS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL PAUL RICHARDS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/socket.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <machine/bus_memio.h>
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#include <dev/lnc/if_lncvar.h>
#define AMD_VENDOR_ID 0x1022
#define PCI_DEVICE_ID_PCNet_PCI 0x2000
#define PCI_DEVICE_ID_PCHome_PCI 0x2001
#define LNC_PROBE_PRIORITY -1
static int
lnc_pci_probe(device_t dev)
{
if (pci_get_vendor(dev) != AMD_VENDOR_ID)
return (ENXIO);
switch(pci_get_device(dev)) {
case PCI_DEVICE_ID_PCNet_PCI:
device_set_desc(dev, "PCNet/PCI Ethernet adapter");
return(LNC_PROBE_PRIORITY);
break;
case PCI_DEVICE_ID_PCHome_PCI:
device_set_desc(dev, "PCHome/PCI Ethernet adapter");
return(LNC_PROBE_PRIORITY);
break;
default:
return (ENXIO);
break;
}
return (ENXIO);
}
static void
lnc_alloc_callback(void *arg, bus_dma_segment_t *seg, int nseg, int error)
{
/* Do nothing */
return;
}
static int
lnc_pci_attach(device_t dev)
{
lnc_softc_t *sc = device_get_softc(dev);
unsigned command;
int rid = 0;
int err = 0;
bus_size_t lnc_mem_size;
device_printf(dev, "Attaching %s\n", device_get_desc(dev));
command = pci_read_config(dev, PCIR_COMMAND, 4);
command |= PCIM_CMD_PORTEN | PCIM_CMD_BUSMASTEREN;
pci_write_config(dev, PCIR_COMMAND, command, 4);
rid = PCIR_MAPS;
sc->portres = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0, 1,
RF_ACTIVE);
if (! sc->portres)
device_printf(dev, "Cannot allocate I/O ports\n");
rid = 0;
sc->irqres = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
RF_ACTIVE|RF_SHAREABLE);
if (! sc->irqres)
device_printf(dev, "Cannot allocate irq\n");
err = bus_setup_intr(dev, sc->irqres, INTR_TYPE_NET, lncintr,
sc, &sc->intrhand);
if (err)
device_printf(dev, "Cannot setup irq handler\n");
sc->iobase = rman_get_start(sc->portres);
/* XXX temp setting for nic */
sc->nic.ic = PCnet_PCI;
sc->nic.ident = NE2100;
sc->nic.mem_mode = DMA_FIXED;
sc->nrdre = NRDRE;
sc->ntdre = NTDRE;
sc->rap = sc->iobase + PCNET_RAP;
sc->rdp = sc->iobase + PCNET_RDP;
sc->bdp = sc->iobase + PCNET_BDP;
/* Create a DMA tag describing the ring memory we need */
lnc_mem_size = ((NDESC(sc->nrdre) + NDESC(sc->ntdre)) *
sizeof(struct host_ring_entry));
lnc_mem_size += (NDESC(sc->nrdre) * RECVBUFSIZE) +
(NDESC(sc->ntdre) * TRANSBUFSIZE);
err = bus_dma_tag_create(NULL, /* parent */
1, /* alignement */
0, /* boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
lnc_mem_size, /* segsize */
1, /* nsegments */
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
0, /* flags */
&sc->dmat);
if (err) {
device_printf(dev, "Can't create DMA tag\n");
/* XXX need to free currently allocated resources here */
return (ENOMEM);
}
err = bus_dmamem_alloc(sc->dmat, (void **)&sc->recv_ring,
BUS_DMA_NOWAIT, &sc->dmamap);
if (err) {
device_printf(dev, "Couldn't allocate memory\n");
/* XXX need to free currently allocated resources here */
return (ENOMEM);
}
bus_dmamap_load(sc->dmat, sc->dmamap, sc->recv_ring, lnc_mem_size,
lnc_alloc_callback, sc->recv_ring, BUS_DMA_NOWAIT);
/* Call generic attach code */
if (! lnc_attach_common(dev)) {
device_printf(dev, "Generic attach code failed\n");
}
return (0);
}
static int
lnc_pci_detach(device_t dev)
{
lnc_softc_t *sc = device_get_softc(dev);
int s = splimp();
ether_ifdetach(&sc->arpcom.ac_if, ETHER_BPF_SUPPORTED);
lnc_stop(sc);
bus_teardown_intr(dev, sc->irqres, sc->intrhand);
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irqres);
bus_release_resource(dev, SYS_RES_IOPORT, PCIR_MAPS, sc->portres);
bus_dmamap_unload(sc->dmat, sc->dmamap);
bus_dmamem_free(sc->dmat, sc->recv_ring, sc->dmamap);
bus_dma_tag_destroy(sc->dmat);
splx(s);
return (0);
}
static device_method_t lnc_pci_methods[] = {
DEVMETHOD(device_probe, lnc_pci_probe),
DEVMETHOD(device_attach, lnc_pci_attach),
DEVMETHOD(device_detach, lnc_pci_detach),
#ifdef notyet
DEVMETHOD(device_suspend, lnc_pci_suspend),
DEVMETHOD(device_resume, lnc_pci_resume),
DEVMETHOD(device_shutdown, lnc_pci_shutdown),
#endif
{ 0, 0 }
};
static driver_t lnc_pci_driver = {
"lnc",
lnc_pci_methods,
sizeof(struct lnc_softc),
};
DRIVER_MODULE(lnc_pci, pci, lnc_pci_driver, lnc_devclass, 0, 0);