324 lines
12 KiB
C
324 lines
12 KiB
C
/*-
|
|
* Copyright (c) 2000 Michael Smith
|
|
* Copyright (c) 2000 BSDi
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Lookup table for code-to-text translations.
|
|
*/
|
|
struct mly_code_lookup {
|
|
char *string;
|
|
u_int32_t code;
|
|
};
|
|
|
|
static char *mly_describe_code(struct mly_code_lookup *table, u_int32_t code);
|
|
|
|
/********************************************************************************
|
|
* Look up a text description of a numeric code and return a pointer to same.
|
|
*/
|
|
static char *
|
|
mly_describe_code(struct mly_code_lookup *table, u_int32_t code)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; table[i].string != NULL; i++)
|
|
if (table[i].code == code)
|
|
return(table[i].string);
|
|
return(table[i+1].string);
|
|
}
|
|
|
|
#if 0
|
|
static struct mly_code_lookup mly_table_bustype[] = {
|
|
{"SCSI", 0x00},
|
|
{"FC-AL", 0x01},
|
|
{"PCI", 0x03},
|
|
{NULL, 0},
|
|
{"unknown bus", 0}
|
|
};
|
|
#endif
|
|
|
|
static struct mly_code_lookup mly_table_controllertype[] = {
|
|
#if 0 /* not supported by this driver */
|
|
{"DAC960E", 0x01}, /* EISA */
|
|
{"DAC960M", 0x08}, /* MCA */
|
|
{"DAC960PD", 0x10}, /* PCI Dual */
|
|
{"DAC960PL", 0x11}, /* PCU low-cost */
|
|
{"DAC960PDU", 0x12}, /* PD Ultra */
|
|
{"DAC960PE", 0x13}, /* Peregrine low-cost */
|
|
{"DAC960PG", 0x14}, /* Peregrine high-performance */
|
|
{"DAC960PJ", 0x15}, /* Road Runner */
|
|
{"DAC960PTL0", 0x16}, /* Jaguar */
|
|
{"DAC960PR", 0x17}, /* Road Runner (again?) */
|
|
{"DAC960PRL", 0x18}, /* Tomcat */
|
|
{"DAC960PT", 0x19}, /* Road Runner (yet again?) */
|
|
{"DAC1164P", 0x1a}, /* Little Apple */
|
|
{"DAC960PTL1", 0x1b}, /* Jaguar+ */
|
|
#endif
|
|
{"EXR2000P", 0x1c}, /* Big Apple */
|
|
{"EXR3000P", 0x1d}, /* Fibre Apple */
|
|
{"AcceleRAID 352", 0x1e}, /* Leopard */
|
|
{"AcceleRAID 170", 0x1f}, /* Lynx */
|
|
{"AcceleRAID 160", 0x20}, /* Bobcat */
|
|
{NULL, 0},
|
|
{"unknown adapter", 0}
|
|
};
|
|
|
|
static struct mly_code_lookup mly_table_oemname[] = {
|
|
{"Mylex", MLY_OEM_MYLEX},
|
|
{"IBM", MLY_OEM_IBM},
|
|
{"Hewlett-Packard", MLY_OEM_HP},
|
|
{"DEC/Compaq", MLY_OEM_DEC},
|
|
{"Siemens", MLY_OEM_SIEMENS},
|
|
{"Intel", MLY_OEM_INTEL},
|
|
{NULL, 0},
|
|
{"unknown OEM", 0}
|
|
};
|
|
|
|
static struct mly_code_lookup mly_table_memorytype[] = {
|
|
{"DRAM", 0x01},
|
|
{"EDRAM", 0x02},
|
|
{"EDO RAM", 0x03},
|
|
{"SDRAM", 0x04},
|
|
{NULL, 0},
|
|
{"unknown memory", 0}
|
|
};
|
|
|
|
static struct mly_code_lookup mly_table_cputype[] = {
|
|
{"i960CA", 0x01},
|
|
{"i960RD", 0x02},
|
|
{"i960RN", 0x03},
|
|
{"i960RP", 0x04},
|
|
{"NorthBay(?)", 0x05},
|
|
{"StrongArm", 0x06},
|
|
{"i960RM", 0x07},
|
|
{NULL, 0},
|
|
{"unknown CPU", 0}
|
|
};
|
|
|
|
/*
|
|
* This table is directly derived from the corresponding table in the
|
|
* Linux driver, and uses a derivative encoding for simplicity's sake.
|
|
*
|
|
* The first character of the string determines the format of the message.
|
|
*
|
|
* p "physical device <channel>:<target> <text>" (physical device status)
|
|
* s "physical device <channel>:<target> <text>" (scsi message or error)
|
|
* " sense key <key> asc <asc> ascq <ascq>"
|
|
* " info <info> csi <csi>"
|
|
* l "logical drive <unit>: <text>" (logical device status)
|
|
* m "logical drive <unit>: <text>" (logical device message)
|
|
*
|
|
* Messages which are typically suppressed have the first character capitalised.
|
|
* These messages will only be printed if bootverbose is set.
|
|
*
|
|
* The second character in the string indicates an action to be taken as a
|
|
* result of the event.
|
|
*
|
|
* r rescan the device for possible state change
|
|
*
|
|
*/
|
|
static struct mly_code_lookup mly_table_event[] = {
|
|
/* physical device events (0x0000 - 0x007f) */
|
|
{"pr online", 0x0001},
|
|
{"pr standby", 0x0002},
|
|
{"p automatic rebuild started", 0x0005},
|
|
{"p manual rebuild started", 0x0006},
|
|
{"pr rebuild completed", 0x0007},
|
|
{"pr rebuild cancelled", 0x0008},
|
|
{"pr rebuild failed for unknown reasons", 0x0009},
|
|
{"pr rebuild failed due to new physical device", 0x000a},
|
|
{"pr rebuild failed due to logical drive failure", 0x000b},
|
|
{"sr offline", 0x000c},
|
|
{"pr found", 0x000d},
|
|
{"pr gone", 0x000e},
|
|
{"p unconfigured", 0x000f},
|
|
{"p expand capacity started", 0x0010},
|
|
{"pr expand capacity completed", 0x0011},
|
|
{"pr expand capacity failed", 0x0012},
|
|
{"p parity error", 0x0016},
|
|
{"p soft error", 0x0017},
|
|
{"p miscellaneous error", 0x0018},
|
|
{"p reset", 0x0019},
|
|
{"p active spare found", 0x001a},
|
|
{"p warm spare found", 0x001b},
|
|
{"s sense data received", 0x001c},
|
|
{"p initialization started", 0x001d},
|
|
{"pr initialization completed", 0x001e},
|
|
{"pr initialization failed", 0x001f},
|
|
{"pr initialization cancelled", 0x0020},
|
|
{"P write recovery failed", 0x0021},
|
|
{"p scsi bus reset failed", 0x0022},
|
|
{"p double check condition", 0x0023},
|
|
{"p device cannot be accessed", 0x0024},
|
|
{"p gross error on scsi processor", 0x0025},
|
|
{"p bad tag from device", 0x0026},
|
|
{"p command timeout", 0x0027},
|
|
{"pr system reset", 0x0028},
|
|
{"p busy status or parity error", 0x0029},
|
|
{"pr host set device to failed state", 0x002a},
|
|
{"pr selection timeout", 0x002b},
|
|
{"p scsi bus phase error", 0x002c},
|
|
{"pr device returned unknown status", 0x002d},
|
|
{"pr device not ready", 0x002e},
|
|
{"p device not found at startup", 0x002f},
|
|
{"p COD write operation failed", 0x0030},
|
|
{"p BDT write operation failed", 0x0031},
|
|
{"p missing at startup", 0x0039},
|
|
{"p start rebuild failed due to physical drive too small", 0x003a},
|
|
/* logical device events (0x0080 - 0x00ff) */
|
|
{"m consistency check started", 0x0080},
|
|
{"mr consistency check completed", 0x0081},
|
|
{"mr consistency check cancelled", 0x0082},
|
|
{"mr consistency check completed with errors", 0x0083},
|
|
{"mr consistency check failed due to logical drive failure", 0x0084},
|
|
{"mr consistency check failed due to physical device failure", 0x0085},
|
|
{"lr offline", 0x0086},
|
|
{"lr critical", 0x0087},
|
|
{"lr online", 0x0088},
|
|
{"m automatic rebuild started", 0x0089},
|
|
{"m manual rebuild started", 0x008a},
|
|
{"mr rebuild completed", 0x008b},
|
|
{"mr rebuild cancelled", 0x008c},
|
|
{"mr rebuild failed for unknown reasons", 0x008d},
|
|
{"mr rebuild failed due to new physical device", 0x008e},
|
|
{"mr rebuild failed due to logical drive failure", 0x008f},
|
|
{"l initialization started", 0x0090},
|
|
{"lr initialization completed", 0x0091},
|
|
{"lr initialization cancelled", 0x0092},
|
|
{"lr initialization failed", 0x0093},
|
|
{"lr found", 0x0094},
|
|
{"lr gone", 0x0095},
|
|
{"l expand capacity started", 0x0096},
|
|
{"lr expand capacity completed", 0x0097},
|
|
{"lr expand capacity failed", 0x0098},
|
|
{"l bad block found", 0x0099},
|
|
{"lr size changed", 0x009a},
|
|
{"lr type changed", 0x009b},
|
|
{"l bad data block found", 0x009c},
|
|
{"l read of data block in bdt", 0x009e},
|
|
{"l write back data for disk block lost", 0x009f},
|
|
/* enclosure management events (0x0100 - 0x017f) */
|
|
{"e enclosure %d fan %d failed", 0x0140},
|
|
{"e enclosure %d fan %d ok", 0x0141},
|
|
{"e enclosure %d fan %d not present", 0x0142},
|
|
{"e enclosure %d power supply %d failed", 0x0143},
|
|
{"e enclosure %d power supply %d ok", 0x0144},
|
|
{"e enclosure %d power supply %d not present", 0x0145},
|
|
{"e enclosure %d temperature sensor %d failed", 0x0146},
|
|
{"e enclosure %d temperature sensor %d critical", 0x0147},
|
|
{"e enclosure %d temperature sensor %d ok", 0x0148},
|
|
{"e enclosure %d temperature sensor %d not present", 0x0149},
|
|
{"e enclosure %d unit %d access critical", 0x014a},
|
|
{"e enclosure %d unit %d access ok", 0x014b},
|
|
{"e enclosure %d unit %d access offline", 0x014c},
|
|
/* controller events (0x0180 - 0x01ff) */
|
|
{"c cache write back error", 0x0181},
|
|
{"c battery backup unit found", 0x0188},
|
|
{"c battery backup unit charge level low", 0x0189},
|
|
{"c battery backup unit charge level ok", 0x018a},
|
|
{"c installation aborted", 0x0193},
|
|
{"c mirror race recovery in progress", 0x0195},
|
|
{"c mirror race on critical drive", 0x0196},
|
|
{"c memory soft ecc error", 0x019e},
|
|
{"c memory hard ecc error", 0x019f},
|
|
{"c battery backup unit failed", 0x01a2},
|
|
{NULL, 0},
|
|
{"? unknown event code", 0}
|
|
};
|
|
|
|
/*
|
|
* Values here must be 16 characters or less, as they are packed into
|
|
* the 'product' field in the SCSI inquiry data.
|
|
*/
|
|
static struct mly_code_lookup mly_table_device_state[] = {
|
|
{"offline", MLY_DEVICE_STATE_OFFLINE},
|
|
{"unconfigured", MLY_DEVICE_STATE_UNCONFIGURED},
|
|
{"online", MLY_DEVICE_STATE_ONLINE},
|
|
{"critical", MLY_DEVICE_STATE_CRITICAL},
|
|
{"writeonly", MLY_DEVICE_STATE_WRITEONLY},
|
|
{"standby", MLY_DEVICE_STATE_STANDBY},
|
|
{"missing", MLY_DEVICE_STATE_MISSING},
|
|
{NULL, 0},
|
|
{"unknown state", 0}
|
|
};
|
|
|
|
/*
|
|
* Values here must be 8 characters or less, as they are packed into
|
|
* the 'vendor' field in the SCSI inquiry data.
|
|
*/
|
|
static struct mly_code_lookup mly_table_device_type[] = {
|
|
{"RAID 0", MLY_DEVICE_TYPE_RAID0},
|
|
{"RAID 1", MLY_DEVICE_TYPE_RAID1},
|
|
{"RAID 3", MLY_DEVICE_TYPE_RAID3}, /* right asymmetric parity */
|
|
{"RAID 5", MLY_DEVICE_TYPE_RAID5}, /* right asymmetric parity */
|
|
{"RAID 6", MLY_DEVICE_TYPE_RAID6}, /* Mylex RAID 6 */
|
|
{"RAID 7", MLY_DEVICE_TYPE_RAID7}, /* JBOD */
|
|
{"SPAN", MLY_DEVICE_TYPE_NEWSPAN}, /* New Mylex SPAN */
|
|
{"RAID 3", MLY_DEVICE_TYPE_RAID3F}, /* fixed parity */
|
|
{"RAID 3", MLY_DEVICE_TYPE_RAID3L}, /* left symmetric parity */
|
|
{"SPAN", MLY_DEVICE_TYPE_SPAN}, /* current spanning implementation */
|
|
{"RAID 5", MLY_DEVICE_TYPE_RAID5L}, /* left symmetric parity */
|
|
{"RAID E", MLY_DEVICE_TYPE_RAIDE}, /* concatenation */
|
|
{"PHYSICAL", MLY_DEVICE_TYPE_PHYSICAL}, /* physical device */
|
|
{NULL, 0},
|
|
{"UNKNOWN", 0}
|
|
};
|
|
|
|
#if 0
|
|
static struct mly_code_lookup mly_table_stripe_size[] = {
|
|
{"NONE", MLY_STRIPE_ZERO},
|
|
{"512B", MLY_STRIPE_512b},
|
|
{"1k", MLY_STRIPE_1k},
|
|
{"2k", MLY_STRIPE_2k},
|
|
{"4k", MLY_STRIPE_4k},
|
|
{"8k", MLY_STRIPE_8k},
|
|
{"16k", MLY_STRIPE_16k},
|
|
{"32k", MLY_STRIPE_32k},
|
|
{"64k", MLY_STRIPE_64k},
|
|
{"128k", MLY_STRIPE_128k},
|
|
{"256k", MLY_STRIPE_256k},
|
|
{"512k", MLY_STRIPE_512k},
|
|
{"1M", MLY_STRIPE_1m},
|
|
{NULL, 0},
|
|
{"unknown", 0}
|
|
};
|
|
|
|
static struct mly_code_lookup mly_table_cacheline_size[] = {
|
|
{"NONE", MLY_CACHELINE_ZERO},
|
|
{"512B", MLY_CACHELINE_512b},
|
|
{"1k", MLY_CACHELINE_1k},
|
|
{"2k", MLY_CACHELINE_2k},
|
|
{"4k", MLY_CACHELINE_4k},
|
|
{"8k", MLY_CACHELINE_8k},
|
|
{"16k", MLY_CACHELINE_16k},
|
|
{"32k", MLY_CACHELINE_32k},
|
|
{"64k", MLY_CACHELINE_64k},
|
|
{NULL, 0},
|
|
{"unknown", 0}
|
|
};
|
|
#endif
|