d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
11f3a6e295
freebsd-nq/contrib/groff/doc/groff-7
Ruslan Ermilov cb16e62e58 Virgin import of FSF groff v1.18.1
2002-10-11 08:52:17 +00:00

1609 lines
50 KiB
Plaintext
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This is groff, produced by makeinfo version 4.2 from ./groff.texinfo.
This manual documents GNU `troff' version 1.18.
Copyright (C) 1994-2000, 2001, 2002 Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.1 or any later version published by the Free Software
Foundation; with no Invariant Sections, with the Front-Cover texts
being `A GNU Manual," and with the Back-Cover Texts as in (a)
below. A copy of the license is included in the section entitled
`GNU Free Documentation License."
(a) The FSF's Back-Cover Text is: `You have freedom to copy and
modify this GNU Manual, like GNU software. Copies published by
the Free Software Foundation raise funds for GNU development."
INFO-DIR-SECTION Miscellaneous
START-INFO-DIR-ENTRY
* Groff: (groff). The GNU troff document formatting system.
END-INFO-DIR-ENTRY

File: groff, Node: Diversions, Next: Environments, Prev: Traps, Up: gtroff Reference
Diversions
==========
In `gtroff' it is possible to "divert" text into a named storage
area. Due to the similarity to defining macros it is sometimes said to
be stored in a macro. This is used for saving text for output at a
later time, which is useful for keeping blocks of text on the same
page, footnotes, tables of contents, and indices.
For orthogonality it is said that `gtroff' is in the "top-level
diversion" if no diversion is active (i.e., the data is diverted to the
output device).
- Request: .di macro
- Request: .da macro
Begin a diversion. Like the `de' request, it takes an argument of
a macro name to divert subsequent text into. The `da' macro
appends to an existing diversion.
`di' or `da' without an argument ends the diversion.
- Request: .box macro
- Request: .boxa macro
Begin (or appends to) a diversion like the `di' and `da' requests.
The difference is that `box' and `boxa' do not include a
partially-filled line in the diversion.
Compare this:
Before the box.
.box xxx
In the box.
.br
.box
After the box.
.br
=> Before the box. After the box.
.xxx
=> In the box.
with this:
Before the diversion.
.di yyy
In the diversion.
.br
.di
After the diversion.
.br
=> After the diversion.
.yyy
=> Before the diversion. In the diversion.
`box' or `boxa' without an argument ends the diversion.
- Register: \n[.z]
- Register: \n[.d]
Diversions may be nested. The read-only number register `.z'
contains the name of the current diversion (this is a string-valued
register). The read-only number register `.d' contains the current
vertical place in the diversion. If not in a diversion it is the
same as the register `nl'.
- Register: \n[.h]
The "high-water mark" on the current page. It corresponds to the
text baseline of the lowest line on the page. This is a read-only
register.
.tm .h==\n[.h], nl==\n[nl]
=> .h==0, nl==-1
This is a test.
.br
.sp 2
.tm .h==\n[.h], nl==\n[nl]
=> .h==40, nl==120
As can be seen in the previous example, empty lines are not
considered in the return value of the `.h' register.
- Register: \n[dn]
- Register: \n[dl]
After completing a diversion, the read-write number registers `dn'
and `dl' contain the vertical and horizontal size of the diversion.
.\" Center text both horizontally & vertically
.
.\" Enclose macro definitions in .eo and .ec
.\" to avoid the doubling of the backslash
.eo
.\" macro .(c starts centering mode
.de (c
. br
. ev (c
. evc 0
. in 0
. nf
. di @c
..
.\" macro .)c terminates centering mode
.de )c
. br
. ev
. di
. nr @s (((\n[.t]u - \n[dn]u) / 2u) - 1v)
. sp \n[@s]u
. ce 1000
. @c
. ce 0
. sp \n[@s]u
. br
. fi
. rr @s
. rm @s
. rm @c
..
.\" End of macro definitions, restore escape mechanism
.ec
- Escape: \!
- Escape: \?ANYTHING\?
Prevent requests, macros, and escapes from being interpreted when
read into a diversion. This takes the given text and
"transparently" embeds it into the diversion. This is useful for
macros which shouldn't be invoked until the diverted text is
actually output.
The `\!' escape transparently embeds text up to and including the
end of the line. The `\?' escape transparently embeds text until
the next occurrence of the `\?' escape. For example:
\?ANYTHING\?
ANYTHING may not contain newlines; use `\!' to embed newlines in
a diversion. The escape sequence `\?' is also recognized in copy
mode and turned into a single internal code; it is this code that
terminates ANYTHING. Thus the following example prints 4.
.nr x 1
.nf
.di d
\?\\?\\\\?\\\\\\\\nx\\\\?\\?\?
.di
.nr x 2
.di e
.d
.di
.nr x 3
.di f
.e
.di
.nr x 4
.f
Both escapes read the data in copy mode.
If `\!' is used in the top-level diversion, its argument is
directly embedded into the `gtroff' intermediate output. This can
be used for example to control a postprocessor which processes the
data before it is sent to the device driver.
The `\?' escape used in the top-level diversion produces no output
at all; its argument is simply ignored.
- Request: .output string
Emit STRING directly to the `gtroff' intermediate output (subject
to copy-mode interpretation); this is similar to `\!' used at the
top level. An initial double quote in STRING is stripped off to
allow initial blanks.
This request can't be used before the first page has started - if
you get an error, simply insert `.br' before the `output' request.
Without argument, `output' is ignored.
Use with caution! It is normally only needed for mark-up used by a
postprocessor which does something with the output before sending
it to the output device, filtering out `string' again.
- Request: .asciify div
"Unformat" the diversion specified by DIV in such a way that ASCII
characters, characters translated with the `trin' request, space
characters, and some escape sequences that were formatted and
diverted are treated like ordinary input characters when the
diversion is reread. It can be also used for gross hacks; for
example, the following sets register `n' to 1.
.tr @.
.di x
@nr n 1
.br
.di
.tr @@
.asciify x
.x
*Note Copy-in Mode::.
- Request: .unformat div
Like `asciify', unformat the specified diversion. However,
`unformat' only unformats spaces and tabs between words.
Unformatted tabs are treated as input tokens, and spaces are
stretchable again.
The vertical size of lines is not preserved; glyph information
(font, font size, space width, etc.) is retained.

File: groff, Node: Environments, Next: Suppressing output, Prev: Diversions, Up: gtroff Reference
Environments
============
It happens frequently that some text should be printed in a certain
format regardless of what may be in effect at the time, for example, in
a trap invoked macro to print headers and footers. To solve this
`gtroff' processes text in "environments". An environment contains
most of the parameters that control text processing. It is possible to
switch amongst these environments; by default `gtroff' processes text
in environment 0. The following is the information kept in an
environment.
* font parameters (size, family, style, glyph height and slant, space
and sentence space size)
* page parameters (line length, title length, vertical spacing, line
spacing, indentation, line numbering, centering, right-justifying,
underlining, hyphenation data)
* fill and adjust mode
* tab stops, tab and leader characters, escape character, no-break
and hyphen indicators, margin character data
* partially collected lines
* input traps
* drawing and fill colours
These environments may be given arbitrary names (see *Note
Identifiers::, for more info). Old versions of `troff' only had
environments named `0', `1', and `2'.
- Request: .ev [env]
- Register: \n[.ev]
Switch to another environment. The argument ENV is the name of
the environment to switch to. With no argument, `gtroff' switches
back to the previous environment. There is no limit on the number
of named environments; they are created the first time that they
are referenced. The `.ev' read-only register contains the name or
number of the current environment. This is a string-valued
register.
Note that a call to `ev' (with argument) pushes the previously
active environment onto a stack. If, say, environments `foo',
`bar', and `zap' are called (in that order), the first `ev'
request without parameter switches back to environment `bar'
(which is popped off the stack), and a second call switches back
to environment `foo'.
Here is an example:
.ev footnote-env
.fam N
.ps 6
.vs 8
.ll -.5i
.ev
...
.ev footnote-env
\(dg Note the large, friendly letters.
.ev
- Request: .evc env
Copy the environment ENV into the current environment.
The following environment data is not copied:
* Partially filled lines.
* The status whether the previous line was interrupted.
* The number of lines still to center, or to right-justify, or
to underline (with or without underlined spaces); they are
set to zero.
* The status whether a temporary indent is active.
* Input traps and its associated data.
* Line numbering mode is disabled; it can be reactivated with
`.nm +0'.
* The number of consecutive hyphenated lines (set to zero).
- Register: \n[.cht]
- Register: \n[.cdp]
- Register: \n[.csk]
The `\n[.cht]' register contains the maximum extent (above the
baseline) of the last glyph added to the current environment.
The `\n[.cdp]' register contains the maximum extent (below the
baseline) of the last glyph added to the current environment.
The `\n[.csk]' register contains the "skew" (how far to the right
of the glyph's center that `gtroff' shold place an accent) of the
last glyph added to the current environment.

File: groff, Node: Suppressing output, Next: Colors, Prev: Environments, Up: gtroff Reference
Suppressing output
==================
- Escape: \ONUM
Disable or enable output depending on the value of NUM:
`\O0'
Disable any glyphs from being emitted to the device driver,
provided that the escape occurs at the outer level (see
`\O[3]' and `\O[4]'). Motion is not suppressed so
effectively `\O[0]' means _pen up_.
`\O1'
Enable output of glyphs, provided that the escape occurs at
the outer level.
`\O0' and `\O1' also reset the four registers `opminx', `opminy',
`opmaxx', and `opmaxy' to -1. *Note Register Index::. These four
registers mark the top left and bottom right hand corners of a box
which encompasses all written glyphs.
For example the input text:
Hello \O[0]world \O[1]this is a test.
produces the following output:
Hello this is a test.
`\O2'
Provided that the escape occurs at the outer level, enable
output of glyphs and also write out to `stderr' the page
number and four registers encompassing the glyphs previously
written since the last call to `\O'.
`\O3'
Begin a nesting level. At start-up, `gtroff' is at outer
level.
`\O4'
End a nesting level.
`\O[5PFILENAME]'
This escape is `grohtml' specific. Provided that this escape
occurs at the outer nesting level write the `filename' to
`stderr'. The position of the image, P, must be specified
and must be one of `l', `r', `c', or `i' (left, right,
centered, inline). FILENAME will be associated with the
production of the next inline image.

File: groff, Node: Colors, Next: I/O, Prev: Suppressing output, Up: gtroff Reference
Colors
======
- Request: .color [n]
- Register: \n[.color]
If N is missing or non-zero, activate colors (this is the default);
otherwise, turn it off.
The read-only number register `.color' is 1 if colors are active,
0 otherwise.
Internally, `color' sets a global flag; it does not produce a
token. Similar to the `cp' request, you should use it at the
beginning of your document to control color output.
Colors can be also turned off with the `-c' command line option.
- Request: .defcolor ident scheme color_components
Define color with name IDENT. SCHEME can be one of the following
values: `rgb' (three components), `cym' (three components), `cmyk'
(four components), and `gray' or `grey' (one component).
Color components can be given either as a hexadecimal string or as
positive decimal integers in the range 0-65535. A hexadecimal
string contains all color components concatenated. It must start
with either `#' or `##'; the former specifies hex values in the
range 0-255 (which are internally multiplied by 257), the latter
in the range 0-65535. Examples: `#FFC0CB' (pink), `##ffff0000ffff'
(magenta). The default color name value is device-specific
(usually black). It is possible that the default color for `\m'
and `\M' is not identical.
A new scaling indicator `f' has been introduced which multiplies
its value by 65536; this makes it convenient to specify color
components as fractions in the range 0 to 1 (1f equals 65536u).
Example:
.defcolor darkgreen rgb 0.1f 0.5f 0.2f
Note that `f' is the default scaling indicator for the `defcolor'
request, thus the above statement is equivalent to
.defcolor darkgreen rgb 0.1 0.5 0.2
- Escape: \mC
- Escape: \m(CO
- Escape: \m[COLOR]
Set drawing color. The following example shows how to turn the
next four words red.
\m[red]these are in red\m[] and these words are in black.
The escape `\m[]' returns to the previous color.
The drawing color is associated with the current environment
(*note Environments::).
Note that `\m' doesn't produce an input token in `gtroff'. As a
consequence, it can be used in requests like `mc' (which expects a
single character as an argument) to change the color on the fly:
.mc \m[red]x\m[]
- Escape: \MC
- Escape: \M(CO
- Escape: \M[COLOR]
Set background color for filled objects drawn with the `\D'...''
commands.
A red ellipse can be created with the following code:
\M[red]\h'0.5i'\D'E 2i 1i'\M[]
The escape `\M[]' returns to the previous fill color.
The fill color is associated with the current environment (*note
Environments::).
Note that `\M' doesn't produce an input token in `gtroff'.

File: groff, Node: I/O, Next: Postprocessor Access, Prev: Colors, Up: gtroff Reference
I/O
===
`gtroff' has several requests for including files:
- Request: .so file
Read in the specified FILE and includes it in place of the `so'
request. This is quite useful for large documents, e.g. keeping
each chapter in a separate file. *Note gsoelim::, for more
information.
Since `gtroff' replaces the `so' request with the contents of
`file', it makes a difference whether the data is terminated with
a newline or not: Assuming that file `xxx' contains the word `foo'
without a final newline, this
This is
.so xxx
bar
yields `This is foobar'.
- Request: .pso command
Read the standard output from the specified COMMAND and includes
it in place of the `pso' request.
This request causes an error if used in safer mode (which is the
default). Use `groff''s or `troff''s `-U' option to activate
unsafe mode.
The comment regarding a final newline for the `so' request is valid
for `pso' also.
- Request: .mso file
Identical to the `so' request except that `gtroff' searches for
the specified FILE in the same directories as macro files for the
the `-m' command line option. If the file name to be included has
the form `NAME.tmac' and it isn't found, `mso' tries to include
`tmac.NAME' and vice versa.
- Request: .trf file
- Request: .cf file
Transparently output the contents of FILE. Each line is output as
if it were preceded by `\!'; however, the lines are not subject to
copy mode interpretation. If the file does not end with a newline,
then a newline is added (`trf' only). For example, to define a
macro `x' containing the contents of file `f', use
.di x
.trf f
.di
Both `trf' and `cf', when used in a diversion, embeds an object in
the diversion which, when reread, causes the contents of FILE to
be transparently copied through to the output. In UNIX `troff',
the contents of FILE is immediately copied through to the output
regardless of whether there is a current diversion; this behaviour
is so anomalous that it must be considered a bug.
While `cf' copies the contents of FILE completely unprocessed,
`trf' disallows characters such as NUL that are not valid `gtroff'
input characters (*note Identifiers::).
Both requests cause a line break.
- Request: .nx [file]
Force `gtroff' to continue processing of the file specified as an
argument. If no argument is given, immediately jump to the end of
file.
- Request: .rd [prompt [arg1 arg2 ...]]
Read from standard input, and include what is read as though it
were part of the input file. Text is read until a blank line is
encountered.
If standard input is a TTY input device (keyboard), write PROMPT
to standard error, followed by a colon (or send BEL for a beep if
no argument is given).
Arguments after PROMPT are available for the input. For example,
the line
.rd data foo bar
with the input `This is \$2.' prints
This is bar.
Using the `nx' and `rd' requests, it is easy to set up form letters.
The form letter template is constructed like this, putting the
following lines into a file called `repeat.let':
.ce
\*(td
.sp 2
.nf
.rd
.sp
.rd
.fi
Body of letter.
.bp
.nx repeat.let
When this is run, a file containing the following lines should be
redirected in. Note that requests included in this file are executed
as though they were part of the form letter. The last block of input
is the `ex' request which tells `groff' to stop processing. If this
was not there, `groff' would not know when to stop.
Trent A. Fisher
708 NW 19th Av., #202
Portland, OR 97209
Dear Trent,
Len Adollar
4315 Sierra Vista
San Diego, CA 92103
Dear Mr. Adollar,
.ex
- Request: .pi pipe
Pipe the output of `gtroff' to the shell command(s) specified by
PIPE. This request must occur before `gtroff' has a chance to
print anything.
`pi' causes an error if used in safer mode (which is the default).
Use `groff''s or `troff''s `-U' option to activate unsafe mode.
Multiple calls to `pi' are allowed, acting as a chain. For
example,
.pi foo
.pi bar
...
is the same as `.pi foo | bar'.
Note that the intermediate output format of `gtroff' is piped to
the specified commands. Consequently, calling `groff' without the
`-Z' option normally causes a fatal error.
- Request: .sy cmds
- Register: \n[systat]
Execute the shell command(s) specified by CMDS. The output is not
saved anyplace, so it is up to the user to do so.
This request causes an error if used in safer mode (which is the
default). Use `groff''s or `troff''s `-U' option to activate
unsafe mode.
For example, the following code fragment introduces the current
time into a document:
.sy perl -e 'printf ".nr H %d\\n.nr M %d\\n.nr S %d\\n",\
(localtime(time))[2,1,0]' > /tmp/x\n[$$]
.so /tmp/x\n[$$]
.sy rm /tmp/x\n[$$]
\nH:\nM:\nS
Note that this works by having the `perl' script (run by `sy')
print out the `nr' requests which set the number registers `H',
`M', and `S', and then reads those commands in with the `so'
request.
For most practical purposes, the number registers `seconds',
`minutes', and `hours' which are initialized at start-up of
`gtroff' should be sufficient. Use the `af' request to get a
formatted output:
.af hours 00
.af minutes 00
.af seconds 00
\n[hours]:\n[minutes]:\n[seconds]
The `systat' read-write number register contains the return value
of the `system()' function executed by the last `sy' request.
- Request: .open stream file
- Request: .opena stream file
Open the specified FILE for writing and associates the specified
STREAM with it.
The `opena' request is like `open', but if the file exists, append
to it instead of truncating it.
Both `open' and `opena' cause an error if used in safer mode
(which is the default). Use `groff''s or `troff''s `-U' option to
activate unsafe mode.
- Request: .write stream data
- Request: .writec stream data
Write to the file associated with the specified STREAM. The
stream must previously have been the subject of an open request.
The remainder of the line is interpreted as the `ds' request reads
its second argument: A leading `"' is stripped, and it is read in
copy-in mode.
The `writec' request is like `write', but only `write' appends a
newline to the data.
- Request: .writem stream xx
Write the contents of the macro or string XX to the file
associated with the specified STREAM.
XX is read in copy mode, i.e., already formatted elements are
ignored. Consequently, diversions must be unformatted with the
`asciify' request before calling `writem'. Usually, this means a
loss of information.
- Request: .close stream
Close the specified STREAM; the stream is no longer an acceptable
argument to the `write' request.
Here a simple macro to write an index entry.
.open idx test.idx
.
.de IX
. write idx \\n[%] \\$*
..
.
.IX test entry
.
.close idx
- Escape: \VE
- Escape: \V(EV
- Escape: \V[ENV]
Interpolate the contents of the specified environment variable ENV
(one-character name E, two-character name EV) as returned by the
function `getenv'. `\V' is interpreted in copy-in mode.

File: groff, Node: Postprocessor Access, Next: Miscellaneous, Prev: I/O, Up: gtroff Reference
Postprocessor Access
====================
There are two escapes which give information directly to the
postprocessor. This is particularly useful for embedding POSTSCRIPT
into the final document.
- Escape: \X'XXX'
Embeds its argument into the `gtroff' output preceded with `x X'.
The escapes `\&', `\)', `\%', and `\:' are ignored within `\X',
`\ ' and `\~' are converted to single space characters. All other
escapes (except `\\' which produces a backslash) cause an error.
If the `use_charnames_in_special' keyword is set in the `DESC'
file, special characters no longer cause an error; the name XX is
represented as `\(XX)' in the `x X' output command. Additionally,
the backslash is represented as `\\'.
`use_charnames_in_special' is currently used by `grohtml' only.
- Escape: \YN
- Escape: \Y(NM
- Escape: \Y[NAME]
This is approximately equivalent to `\X'\*[NAME]'' (one-character
name N, two-character name NM). However, the contents of the
string or macro NAME are not interpreted; also it is permitted for
NAME to have been defined as a macro and thus contain newlines (it
is not permitted for the argument to `\X' to contain newlines).
The inclusion of newlines requires an extension to the UNIX `troff'
output format, and confuses drivers that do not know about this
extension (*note Device Control Commands::).
*Note Output Devices::.

File: groff, Node: Miscellaneous, Next: Gtroff Internals, Prev: Postprocessor Access, Up: gtroff Reference
Miscellaneous
=============
This section documents parts of `gtroff' which cannot (yet) be
categorized elsewhere in this manual.
- Request: .nm [start [inc [space [indent]]]]
Print line numbers. START is the line number of the _next_ output
line. INC indicates which line numbers are printed. For example,
the value 5 means to emit only line numbers which are multiples
of 5; this defaults to 1. SPACE is the space to be left between
the number and the text; this defaults to one digit space. The
fourth argument is the indentation of the line numbers, defaulting
to zero. Both SPACE and INDENT are given as multiples of digit
spaces; they can be negative also. Without any arguments, line
numbers are turned off.
`gtroff' reserves three digit spaces for the line number (which is
printed right-justified) plus the amount given by INDENT; the
output lines are concatenated to the line numbers, separated by
SPACE, and _without_ reducing the line length. Depending on the
value of the horizontal page offset (as set with the `po'
request), line numbers which are longer than the reserved space
stick out to the left, or the whole line is moved to the right.
Parameters corresponding to missing arguments are not changed; any
non-digit argument (to be more precise, any argument starting with
a character valid as a delimiter for identifiers) is also treated
as missing.
If line numbering has been disabled with a call to `nm' without an
argument, it can be reactivated with `.nm +0', using the
previously active line numbering parameters.
The parameters of `nm' are associated with the current environment
(*note Environments::). The current output line number is
available in the number register `ln'.
.po 1m
.ll 2i
This test shows how line numbering works with groff.
.nm 999
This test shows how line numbering works with groff.
.br
.nm xxx 3 2
.ll -\w'0'u
This test shows how line numbering works with groff.
.nn 2
This test shows how line numbering works with groff.
And here the result:
This test shows how
line numbering works
999 with groff. This
1000 test shows how line
1001 numbering works with
1002 groff.
This test shows how
line numbering
works with groff.
This test shows how
1005 line numbering
works with groff.
- Request: .nn [skip]
Temporarily turn off line numbering. The argument is the number
of lines not to be numbered; this defaults to 1.
- Request: .mc glyph [dist]
Print a "margin character" to the right of the text.(1) (*note
Miscellaneous-Footnote-1::) The first argument is the glyph to be
printed. The second argument is the distance away from the right
margin. If missing, the previously set value is used; default is
10pt). For text lines that are too long (that is, longer than the
text length plus DIST), the margin character is directly appended
to the lines.
With no arguments the margin character is turned off. If this
occurs before a break, no margin character is printed.
For empty lines and lines produced by the `tl' request no margin
character is emitted.
The margin character is associated with the current environment
(*note Environments::).
This is quite useful for indicating text that has changed, and, in
fact, there are programs available for doing this (they are called
`nrchbar' and `changebar' and can be found in any
`comp.sources.unix' archive.
.ll 3i
.mc |
This paragraph is highlighted with a margin
character.
.sp
Note that vertical space isn't marked.
.br
\&
.br
But we can fake it with `\&'.
Result:
This paragraph is highlighted |
with a margin character. |
Note that vertical space isn't |
marked. |
|
But we can fake it with `\&'. |
- Request: .psbb filename
- Register: \n[llx]
- Register: \n[lly]
- Register: \n[urx]
- Register: \n[ury]
Retrieve the bounding box of the PostScript image found in
FILENAME. The file must conform to Adobe's "Document Structuring
Conventions" (DSC); the command searches for a `%%BoundingBox'
comment and extracts the bounding box values into the number
registers `llx', `lly', `urx', and `ury'. If an error occurs (for
example, `psbb' cannot find the `%%BoundingBox' comment), it sets
the four number registers to zero.

File: groff, Node: Miscellaneous-Footnotes, Up: Miscellaneous
(1) "Margin character" is a misnomer since it is an output glyph.

File: groff, Node: Gtroff Internals, Next: Debugging, Prev: Miscellaneous, Up: gtroff Reference
`gtroff' Internals
==================
`gtroff' processes input in three steps. One or more input
characters are converted to an "input token".(1) (*note Gtroff
Internals-Footnote-1::) Then, one or more input tokens are converted
to an "output node". Finally, output nodes are converted to the
intermediate output language understood by all output devices.
Actually, before step one happens, `gtroff' converts certain escape
sequences into reserved input characters (not accessible by the user);
such reserved characters are used for other internal processing also -
this is the very reason why not all characters are valid input. *Note
Identifiers::, for more on this topic.
For example, the input string `fi\[:u]' is converted into a
character token `f', a character token `i', and a special token `:u'
(representing u umlaut). Later on, the character tokens `f' and `i'
are merged to a single output node representing the ligature glyph `fi'
(provided the current font has a glyph for this ligature); the same
happens with `:u'. All output glyph nodes are `processed' which means
that they are invariably associated with a given font, font size,
advance width, etc. During the formatting process, `gtroff' itself
adds various nodes to control the data flow.
Macros, diversions, and strings collect elements in two chained
lists: a list of input tokens which have been passed unprocessed, and a
list of output nodes. Consider the following the diversion.
.di xxx
a
\!b
c
.br
.di
It contains these elements.
node list token list element number
line start node -- 1
glyph node `a' -- 2
word space node -- 3
-- `b' 4
-- `\n' 5
glyph node `c' -- 6
vertical size node -- 7
vertical size node -- 8
-- `\n' 9
Elements 1, 7, and 8 are inserted by `gtroff'; the latter two (which
are always present) specify the vertical extent of the last line,
possibly modified by `\x'. The `br' request finishes the current
partial line, inserting a newline input token which is subsequently
converted to a space when the diversion is reread. Note that the word
space node has a fixed width which isn't stretchable anymore. To
convert horizontal space nodes back to input tokens, use the `unformat'
request.
Macros only contain elements in the token list (and the node list is
empty); diversions and strings can contain elements in both lists.
Note that the `chop' request simply reduces the number of elements
in a macro, string, or diversion by one. Exceptions are "compatibility
save" and "compatibility ignore" input tokens which are ignored. The
`substring' request also ignores those input tokens.
Some requests like `tr' or `cflags' work on glyph identifiers only;
this means that the associated glyph can be changed without destroying
this association. This can be very helpful for substituting glyphs.
In the following example, we assume that glyph `foo' isn't available by
default, so we provide a substitution using the `fchar' request and map
it to input character `x'.
.fchar \[foo] foo
.tr x \[foo]
Now let us assume that we install an additional special font `bar'
which has glyph `foo'.
.special bar
.rchar \[foo]
Since glyphs defined with `fchar' are searched before glyphs in special
fonts, we must call `rchar' to remove the definition of the fallback
glyph. Anyway, the translation is still active; `x' now maps to the
real glyph `foo'.

File: groff, Node: Gtroff Internals-Footnotes, Up: Gtroff Internals
(1) Except the escapes `\f', `\F', `\H', `\m', `\M', `\R', `\s', and
`\S' which are processed immediately if not in copy-in mode.

File: groff, Node: Debugging, Next: Implementation Differences, Prev: Gtroff Internals, Up: gtroff Reference
Debugging
=========
`gtroff' is not easy to debug, but there are some useful features
and strategies for debugging.
- Request: .lf line filename
Change the line number and the file name `gtroff' shall use for
error and warning messages. LINE is the input line number of the
_next_ line.
Without argument, the request is ignored.
This is a debugging aid for documents which are split into many
files, then put together with `soelim' and other preprocessors.
Usually, it isn't invoked manually.
- Request: .tm string
- Request: .tm1 string
- Request: .tmc string
Send STRING to the standard error output; this is very useful for
printing debugging messages among other things.
STRING is read in copy mode.
The `tm' request ignores leading spaces of STRING; `tm1' handles
its argument similar to the `ds' request: a leading double quote
in STRING is stripped to allow initial blanks.
The `tmc' request is similar to `tm1' but does not append a
newline (as is done in `tm' and `tm1').
- Request: .ab [string]
Similar to the `tm' request, except that it causes `gtroff' to
stop processing. With no argument it prints `User Abort.' to
standard error.
- Request: .ex
The `ex' request also causes `gtroff' to stop processing; see also
*Note I/O::.
When doing something involved it is useful to leave the debugging
statements in the code and have them turned on by a command line flag.
.if \n(DB .tm debugging output
To activate these statements say
groff -rDB=1 file
If it is known in advance that there will be many errors and no
useful output, `gtroff' can be forced to suppress formatted output with
the `-z' flag.
- Request: .pm
Print the entire symbol table on `stderr'. Names of all defined
macros, strings, and diversions are print together with their size
in bytes. Since `gtroff' sometimes adds nodes by itself, the
returned size can be larger than expected.
This request differs from UNIX `troff': `gtroff' reports the sizes
of diversions, ignores an additional argument to print only the
total of the sizes, and the size isn't returned in blocks of 128
characters.
- Request: .pnr
Print the names and contents of all currently defined number
registers on `stderr'.
- Request: .ptr
Print the names and positions of all traps (not including input
line traps and diversion traps) on `stderr'. Empty slots in the
page trap list are printed as well, because they can affect the
priority of subsequently planted traps.
- Request: .fl
Instruct `gtroff' to flush its output immediately. The intent is
for interactive use, but this behaviour is currently not
implemented in `gtroff'. Contrary to UNIX `troff', TTY output is
sent to a device driver also (`grotty'), making it non-trivial to
communicate interactively.
This request causes a line break.
- Request: .backtrace
Print a backtrace of the input stack to the standard error stream.
Consider the following in file `test':
.de xxx
. backtrace
..
.de yyy
. xxx
..
.
.yyy
On execution, `gtroff' prints the following:
test:2: backtrace: macro `xxx'
test:5: backtrace: macro `yyy'
test:8: backtrace: file `test'
The option `-b' of `gtroff' internally calls a variant of this
request on each error and warning.
- Register: \n[slimit]
Use the `slimit' number register to set the maximum number of
objects on the input stack. If `slimit' is less than or equal
to 0, there is no limit set. With no limit, a buggy recursive
macro can exhaust virtual memory.
The default value is 1000; this is a compile-time constant.
- Request: .warnscale si
Set the scaling indicator used in warnings to SI. Valid values for
SI are `u', `i', `c', `p', and `P'. At startup, it is set to `i'.
- Request: .spreadwarn [limit]
Make `gtroff' emit a warning if the additional space inserted for
each space between words in an output line is larger or equal to
LIMIT. A negative value is changed to zero; no argument toggles
the warning on and off without changing LIMIT. The default scaling
indicator is `m'. At startup, `spreadwarn' is deactivated, and
LIMIT is set to 3m.
For example,
.spreadwarn 0.2m
will cause a warning if `gtroff' must add 0.2m or more for each
interword space in a line.
This request is active only if text is justified to both margins
(using `.ad b').
`gtroff' has command line options for printing out more warnings
(`-w') and for printing backtraces (`-b') when a warning or an error
occurs. The most verbose level of warnings is `-ww'.
- Request: .warn [flags]
- Register: \n[.warn]
Control the level of warnings checked for. The FLAGS are the sum
of the numbers associated with each warning that is to be enabled;
all other warnings are disabled. The number associated with each
warning is listed below. For example, `.warn 0' disables all
warnings, and `.warn 1' disables all warnings except that about
missing glyphs. If no argument is given, all warnings are enabled.
The read-only number register `.warn' contains the current warning
level.
* Menu:
* Warnings::

File: groff, Node: Warnings, Prev: Debugging, Up: Debugging
Warnings
--------
The warnings that can be given to `gtroff' are divided into the
following categories. The name associated with each warning is used by
the `-w' and `-W' options; the number is used by the `warn' request and
by the `.warn' register.
`char'
`1'
Non-existent glyphs.(1) (*note Warnings-Footnote-1::) This is
enabled by default.
`number'
`2'
Invalid numeric expressions. This is enabled by default. *Note
Expressions::.
`break'
`4'
In fill mode, lines which could not be broken so that their length
was less than the line length. This is enabled by default.
`delim'
`8'
Missing or mismatched closing delimiters.
`el'
`16'
Use of the `el' request with no matching `ie' request. *Note
if-else::.
`scale'
`32'
Meaningless scaling indicators.
`range'
`64'
Out of range arguments.
`syntax'
`128'
Dubious syntax in numeric expressions.
`di'
`256'
Use of `di' or `da' without an argument when there is no current
diversion.
`mac'
`512'
Use of undefined strings, macros and diversions. When an undefined
string, macro, or diversion is used, that string is automatically
defined as empty. So, in most cases, at most one warning is given
for each name.
`reg'
`1024'
Use of undefined number registers. When an undefined number
register is used, that register is automatically defined to have a
value of 0. So, in most cases, at most one warning is given for
use of a particular name.
`tab'
`2048'
Use of a tab character where a number was expected.
`right-brace'
`4096'
Use of `\}' where a number was expected.
`missing'
`8192'
Requests that are missing non-optional arguments.
`input'
`16384'
Invalid input characters.
`escape'
`32768'
Unrecognized escape sequences. When an unrecognized escape
sequence `\X' is encountered, the escape character is ignored, and
X is printed.
`space'
`65536'
Missing space between a request or macro and its argument. This
warning is given when an undefined name longer than two characters
is encountered, and the first two characters of the name make a
defined name. The request or macro is not invoked. When this
warning is given, no macro is automatically defined. This is
enabled by default. This warning never occurs in compatibility
mode.
`font'
`131072'
Non-existent fonts. This is enabled by default.
`ig'
`262144'
Invalid escapes in text ignored with the `ig' request. These are
conditions that are errors when they do not occur in ignored text.
`color'
`524288'
Color related warnings.
`all'
All warnings except `di', `mac' and `reg'. It is intended that
this covers all warnings that are useful with traditional macro
packages.
`w'
All warnings.

File: groff, Node: Warnings-Footnotes, Up: Warnings
(1) `char' is a misnomer since it reports missing glyphs - there
aren't missing input characters, only invalid ones.

File: groff, Node: Implementation Differences, Prev: Debugging, Up: gtroff Reference
Implementation Differences
==========================
GNU `troff' has a number of features which cause incompatibilities
with documents written with old versions of `troff'.
Long names cause some incompatibilities. UNIX `troff' interprets
.dsabcd
as defining a string `ab' with contents `cd'. Normally, GNU `troff'
interprets this as a call of a macro named `dsabcd'. Also UNIX `troff'
interprets `\*[' or `\n[' as references to a string or number register
called `['. In GNU `troff', however, this is normally interpreted as
the start of a long name. In compatibility mode GNU `troff' interprets
long names in the traditional way (which means that they are not
recognized as names).
- Request: .cp [n]
- Request: .do cmd
- Register: \n[.C]
If N is missing or non-zero, turn on compatibility mode;
otherwise, turn it off.
The read-only number register `.C' is 1 if compatibility mode is
on, 0 otherwise.
Compatibility mode can be also turned on with the `-C' command line
option.
The `do' request turns off compatibility mode while executing its
arguments as a `gtroff' command.
.do fam T
executes the `fam' request when compatibility mode is enabled.
`gtroff' restores the previous compatibility setting before
interpreting any files sourced by the CMD.
Two other features are controlled by `-C'. If not in compatibility
mode, GNU `troff' preserves the input level in delimited arguments:
.ds xx '
\w'abc\*(xxdef'
In compatibility mode, the string `72def'' is returned; without `-C'
the resulting string is `168' (assuming a TTY output device).
Finally, the escapes `\f', `\H', `\m', `\M', `\R', `\s', and `\S'
are transparent for recognizing the beginning of a line only in
compatibility mode (this is a rather obscure feature). For example,
the code
.de xx
Hallo!
..
\fB.xx\fP
prints `Hallo!' in bold face if in compatibility mode, and `.xx' in
bold face otherwise.
GNU `troff' does not allow the use of the escape sequences `\|',
`\^', `\&', `\{', `\}', `\<SP>', `\'', `\`', `\-', `\_', `\!', `\%',
and `\c' in names of strings, macros, diversions, number registers,
fonts or environments; UNIX `troff' does. The `\A' escape sequence
(*note Identifiers::) may be helpful in avoiding use of these escape
sequences in names.
Fractional point sizes cause one noteworthy incompatibility. In
UNIX `troff' the `ps' request ignores scale indicators and thus
.ps 10u
sets the point size to 10 points, whereas in GNU `troff' it sets the
point size to 10 scaled points. *Note Fractional Type Sizes::, for
more information.
In GNU `troff' there is a fundamental difference between
(unformatted) input characters and (formatted) output glyphs.
Everything that affects how a glyph is output is stored with the glyph
node; once a glyph node has been constructed it is unaffected by any
subsequent requests that are executed, including `bd', `cs', `tkf',
`tr', or `fp' requests. Normally glyphs are constructed from input
characters at the moment immediately before the glyph is added to the
current output line. Macros, diversions and strings are all, in fact,
the same type of object; they contain lists of input characters and
glyph nodes in any combination. A glyph node does not behave like an
input character for the purposes of macro processing; it does not
inherit any of the special properties that the input character from
which it was constructed might have had. For example,
.di x
\\\\
.br
.di
.x
prints `\\' in GNU `troff'; each pair of input backslashes is turned
into one output backslash and the resulting output backslashes are not
interpreted as escape characters when they are reread. UNIX `troff'
would interpret them as escape characters when they were reread and
would end up printing one `\'. The correct way to obtain a printable
backslash is to use the `\e' escape sequence: This always prints a
single instance of the current escape character, regardless of whether
or not it is used in a diversion; it also works in both GNU `troff' and
UNIX `troff'.(1) (*note Implementation Differences-Footnote-1::) To
store, for some reason, an escape sequence in a diversion that will be
interpreted when the diversion is reread, either use the traditional
`\!' transparent output facility, or, if this is unsuitable, the new
`\?' escape sequence.
*Note Diversions::, and *Note Gtroff Internals::, for more
information.

File: groff, Node: Implementation Differences-Footnotes, Up: Implementation Differences
(1) To be completely independent of the current escape character,
use `\(rs' which represents a reverse solidus (backslash) glyph.

File: groff, Node: Preprocessors, Next: Output Devices, Prev: gtroff Reference, Up: Top
Preprocessors
*************
This chapter describes all preprocessors that come with `groff' or
which are freely available.
* Menu:
* geqn::
* gtbl::
* gpic::
* ggrn::
* grap::
* grefer::
* gsoelim::

File: groff, Node: geqn, Next: gtbl, Prev: Preprocessors, Up: Preprocessors
`geqn'
======
* Menu:
* Invoking geqn::

File: groff, Node: Invoking geqn, Prev: geqn, Up: geqn
Invoking `geqn'
---------------

File: groff, Node: gtbl, Next: gpic, Prev: geqn, Up: Preprocessors
`gtbl'
======
* Menu:
* Invoking gtbl::

File: groff, Node: Invoking gtbl, Prev: gtbl, Up: gtbl
Invoking `gtbl'
---------------

File: groff, Node: gpic, Next: ggrn, Prev: gtbl, Up: Preprocessors
`gpic'
======
* Menu:
* Invoking gpic::

File: groff, Node: Invoking gpic, Prev: gpic, Up: gpic
Invoking `gpic'
---------------

File: groff, Node: ggrn, Next: grap, Prev: gpic, Up: Preprocessors
`ggrn'
======
* Menu:
* Invoking ggrn::

File: groff, Node: Invoking ggrn, Prev: ggrn, Up: ggrn
Invoking `ggrn'
---------------

File: groff, Node: grap, Next: grefer, Prev: ggrn, Up: Preprocessors
`grap'
======
A free implementation of `grap', written by Ted Faber, is available
as an extra package from the following address:
<http://www.lunabase.org/~faber/Vault/software/grap/>

File: groff, Node: grefer, Next: gsoelim, Prev: grap, Up: Preprocessors
`grefer'
========
* Menu:
* Invoking grefer::

File: groff, Node: Invoking grefer, Prev: grefer, Up: grefer
Invoking `grefer'
-----------------

File: groff, Node: gsoelim, Prev: grefer, Up: Preprocessors
`gsoelim'
=========
* Menu:
* Invoking gsoelim::

File: groff, Node: Invoking gsoelim, Prev: gsoelim, Up: gsoelim
Invoking `gsoelim'
------------------

File: groff, Node: Output Devices, Next: File formats, Prev: Preprocessors, Up: Top
Output Devices
**************
* Menu:
* Special Characters::
* grotty::
* grops::
* grodvi::
* grolj4::
* grolbp::
* grohtml::
* gxditview::

File: groff, Node: Special Characters, Next: grotty, Prev: Output Devices, Up: Output Devices
Special Characters
==================
*Note Font Files::.

File: groff, Node: grotty, Next: grops, Prev: Special Characters, Up: Output Devices
`grotty'
========
* Menu:
* Invoking grotty::

File: groff, Node: Invoking grotty, Prev: grotty, Up: grotty
Invoking `grotty'
-----------------
Reference in New Issue View Git Blame Copy Permalink