Brandon Bergren 5c74d551d2 [PowerPC] Fix setting of time in OPAL
There were multiple bugs in the OPAL RTC code which had never been
discovered, as the default configuration of OPAL machines is to
have the BMC / FSP control the RTC.

* Fix calling convention for setting the time -- the variables are passed
directly in CPU registers, not via memory.

* Fix bug in the bcd encoding routines. (from jhibbits)

Tested on POWER9 Talos II (BE) and POWER9 Blackbird (LE).

Reviewed by:	jhibbits (in irc)
Sponsored by:	Tag1 Consulting, Inc.
2020-09-10 01:49:53 +00:00

425 lines
11 KiB
C

/*-
* Copyright (c) 2015 Nathan Whitehorn
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/clock.h>
#include <sys/cpu.h>
#include <sys/eventhandler.h>
#include <sys/kernel.h>
#include <sys/kthread.h>
#include <sys/reboot.h>
#include <sys/sysctl.h>
#include <sys/endian.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/openfirm.h>
#include "clock_if.h"
#include "opal.h"
static int opaldev_probe(device_t);
static int opaldev_attach(device_t);
/* clock interface */
static int opal_gettime(device_t dev, struct timespec *ts);
static int opal_settime(device_t dev, struct timespec *ts);
/* ofw bus interface */
static const struct ofw_bus_devinfo *opaldev_get_devinfo(device_t dev,
device_t child);
static void opal_shutdown(void *arg, int howto);
static void opal_handle_shutdown_message(void *unused,
struct opal_msg *msg);
static void opal_intr(void *);
static device_method_t opaldev_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, opaldev_probe),
DEVMETHOD(device_attach, opaldev_attach),
/* clock interface */
DEVMETHOD(clock_gettime, opal_gettime),
DEVMETHOD(clock_settime, opal_settime),
/* Bus interface */
DEVMETHOD(bus_child_pnpinfo_str, ofw_bus_gen_child_pnpinfo_str),
/* ofw_bus interface */
DEVMETHOD(ofw_bus_get_devinfo, opaldev_get_devinfo),
DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat),
DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model),
DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name),
DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node),
DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type),
DEVMETHOD_END
};
static driver_t opaldev_driver = {
"opal",
opaldev_methods,
0
};
static devclass_t opaldev_devclass;
EARLY_DRIVER_MODULE(opaldev, ofwbus, opaldev_driver, opaldev_devclass, 0, 0,
BUS_PASS_BUS);
static void opal_heartbeat(void);
static void opal_handle_messages(void);
static struct proc *opal_hb_proc;
static struct kproc_desc opal_heartbeat_kp = {
"opal_heartbeat",
opal_heartbeat,
&opal_hb_proc
};
SYSINIT(opal_heartbeat_setup, SI_SUB_KTHREAD_IDLE, SI_ORDER_ANY, kproc_start,
&opal_heartbeat_kp);
static int opal_heartbeat_ms;
EVENTHANDLER_LIST_DEFINE(OPAL_ASYNC_COMP);
EVENTHANDLER_LIST_DEFINE(OPAL_EPOW);
EVENTHANDLER_LIST_DEFINE(OPAL_SHUTDOWN);
EVENTHANDLER_LIST_DEFINE(OPAL_HMI_EVT);
EVENTHANDLER_LIST_DEFINE(OPAL_DPO);
EVENTHANDLER_LIST_DEFINE(OPAL_OCC);
#define OPAL_SOFT_OFF 0
#define OPAL_SOFT_REBOOT 1
static void
opal_heartbeat(void)
{
uint64_t events;
if (opal_heartbeat_ms == 0)
kproc_exit(0);
while (1) {
events = 0;
/* Turn the OPAL state crank */
opal_call(OPAL_POLL_EVENTS, vtophys(&events));
if (events & OPAL_EVENT_MSG_PENDING)
opal_handle_messages();
tsleep(opal_hb_proc, 0, "opal",
MSEC_2_TICKS(opal_heartbeat_ms));
}
}
static int
opaldev_probe(device_t dev)
{
phandle_t iparent;
pcell_t *irqs;
int i, n_irqs;
if (!ofw_bus_is_compatible(dev, "ibm,opal-v3"))
return (ENXIO);
if (opal_check() != 0)
return (ENXIO);
device_set_desc(dev, "OPAL Abstraction Firmware");
/* Manually add IRQs before attaching */
if (OF_hasprop(ofw_bus_get_node(dev), "opal-interrupts")) {
iparent = OF_finddevice("/interrupt-controller@0");
iparent = OF_xref_from_node(iparent);
n_irqs = OF_getproplen(ofw_bus_get_node(dev),
"opal-interrupts") / sizeof(*irqs);
irqs = malloc(n_irqs * sizeof(*irqs), M_DEVBUF, M_WAITOK);
OF_getencprop(ofw_bus_get_node(dev), "opal-interrupts", irqs,
n_irqs * sizeof(*irqs));
for (i = 0; i < n_irqs; i++)
bus_set_resource(dev, SYS_RES_IRQ, i,
ofw_bus_map_intr(dev, iparent, 1, &irqs[i]), 1);
free(irqs, M_DEVBUF);
}
return (BUS_PROBE_SPECIFIC);
}
static int
opaldev_attach(device_t dev)
{
phandle_t child;
device_t cdev;
uint64_t junk;
int i, rv;
uint32_t async_count;
struct ofw_bus_devinfo *dinfo;
struct resource *irq;
/* Test for RTC support and register clock if it works */
rv = opal_call(OPAL_RTC_READ, vtophys(&junk), vtophys(&junk));
do {
rv = opal_call(OPAL_RTC_READ, vtophys(&junk), vtophys(&junk));
if (rv == OPAL_BUSY_EVENT)
rv = opal_call(OPAL_POLL_EVENTS, 0);
} while (rv == OPAL_BUSY_EVENT);
if (rv == OPAL_SUCCESS)
clock_register(dev, 2000);
EVENTHANDLER_REGISTER(OPAL_SHUTDOWN, opal_handle_shutdown_message,
NULL, EVENTHANDLER_PRI_ANY);
EVENTHANDLER_REGISTER(shutdown_final, opal_shutdown, NULL,
SHUTDOWN_PRI_LAST);
OF_getencprop(ofw_bus_get_node(dev), "ibm,heartbeat-ms",
&opal_heartbeat_ms, sizeof(opal_heartbeat_ms));
/* Bind to interrupts */
for (i = 0; (irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
RF_ACTIVE)) != NULL; i++)
bus_setup_intr(dev, irq, INTR_TYPE_TTY | INTR_MPSAFE |
INTR_ENTROPY, NULL, opal_intr, (void *)rman_get_start(irq),
NULL);
OF_getencprop(ofw_bus_get_node(dev), "opal-msg-async-num",
&async_count, sizeof(async_count));
opal_init_async_tokens(async_count);
for (child = OF_child(ofw_bus_get_node(dev)); child != 0;
child = OF_peer(child)) {
dinfo = malloc(sizeof(*dinfo), M_DEVBUF, M_WAITOK | M_ZERO);
if (ofw_bus_gen_setup_devinfo(dinfo, child) != 0) {
free(dinfo, M_DEVBUF);
continue;
}
cdev = device_add_child(dev, NULL, -1);
if (cdev == NULL) {
device_printf(dev, "<%s>: device_add_child failed\n",
dinfo->obd_name);
ofw_bus_gen_destroy_devinfo(dinfo);
free(dinfo, M_DEVBUF);
continue;
}
device_set_ivars(cdev, dinfo);
}
return (bus_generic_attach(dev));
}
static int
bcd2bin32(int bcd)
{
int out = 0;
out += bcd2bin(bcd & 0xff);
out += 100*bcd2bin((bcd & 0x0000ff00) >> 8);
out += 10000*bcd2bin((bcd & 0x00ff0000) >> 16);
out += 1000000*bcd2bin((bcd & 0xffff0000) >> 24);
return (out);
}
static int
bin2bcd32(int bin)
{
int out = 0;
int tmp;
tmp = bin % 100;
out += bin2bcd(tmp) * 0x1;
bin = bin / 100;
tmp = bin % 100;
out += bin2bcd(tmp) * 0x100;
bin = bin / 100;
tmp = bin % 100;
out += bin2bcd(tmp) * 0x10000;
return (out);
}
static int
opal_gettime(device_t dev, struct timespec *ts)
{
int rv;
struct clocktime ct;
uint32_t ymd;
uint64_t hmsm;
rv = opal_call(OPAL_RTC_READ, vtophys(&ymd), vtophys(&hmsm));
while (rv == OPAL_BUSY_EVENT) {
opal_call(OPAL_POLL_EVENTS, 0);
pause("opalrtc", 1);
rv = opal_call(OPAL_RTC_READ, vtophys(&ymd), vtophys(&hmsm));
}
if (rv != OPAL_SUCCESS)
return (ENXIO);
hmsm = be64toh(hmsm);
ymd = be32toh(ymd);
ct.nsec = bcd2bin32((hmsm & 0x000000ffffff0000) >> 16) * 1000;
ct.sec = bcd2bin((hmsm & 0x0000ff0000000000) >> 40);
ct.min = bcd2bin((hmsm & 0x00ff000000000000) >> 48);
ct.hour = bcd2bin((hmsm & 0xff00000000000000) >> 56);
ct.day = bcd2bin((ymd & 0x000000ff) >> 0);
ct.mon = bcd2bin((ymd & 0x0000ff00) >> 8);
ct.year = bcd2bin32((ymd & 0xffff0000) >> 16);
return (clock_ct_to_ts(&ct, ts));
}
static int
opal_settime(device_t dev, struct timespec *ts)
{
int rv;
struct clocktime ct;
uint32_t ymd = 0;
uint64_t hmsm = 0;
clock_ts_to_ct(ts, &ct);
ymd |= (uint32_t)bin2bcd(ct.day);
ymd |= ((uint32_t)bin2bcd(ct.mon) << 8);
ymd |= ((uint32_t)bin2bcd32(ct.year) << 16);
hmsm |= ((uint64_t)bin2bcd32(ct.nsec/1000) << 16);
hmsm |= ((uint64_t)bin2bcd(ct.sec) << 40);
hmsm |= ((uint64_t)bin2bcd(ct.min) << 48);
hmsm |= ((uint64_t)bin2bcd(ct.hour) << 56);
/*
* We do NOT swap endian here, because the values are being sent
* via registers instead of indirect via memory.
*/
do {
rv = opal_call(OPAL_RTC_WRITE, ymd, hmsm);
if (rv == OPAL_BUSY_EVENT) {
rv = opal_call(OPAL_POLL_EVENTS, 0);
pause("opalrtc", 1);
}
} while (rv == OPAL_BUSY_EVENT);
if (rv != OPAL_SUCCESS)
return (ENXIO);
return (0);
}
static const struct ofw_bus_devinfo *
opaldev_get_devinfo(device_t dev, device_t child)
{
return (device_get_ivars(child));
}
static void
opal_shutdown(void *arg, int howto)
{
if (howto & RB_HALT)
opal_call(OPAL_CEC_POWER_DOWN, 0 /* Normal power off */);
else
opal_call(OPAL_CEC_REBOOT);
opal_call(OPAL_RETURN_CPU);
}
static void
opal_handle_shutdown_message(void *unused, struct opal_msg *msg)
{
int howto;
switch (be64toh(msg->params[0])) {
case OPAL_SOFT_OFF:
howto = RB_POWEROFF;
break;
case OPAL_SOFT_REBOOT:
howto = RB_REROOT;
break;
}
shutdown_nice(howto);
}
static void
opal_handle_messages(void)
{
static struct opal_msg msg;
uint64_t rv;
uint32_t type;
rv = opal_call(OPAL_GET_MSG, vtophys(&msg), sizeof(msg));
if (rv != OPAL_SUCCESS)
return;
type = be32toh(msg.msg_type);
switch (type) {
case OPAL_MSG_ASYNC_COMP:
EVENTHANDLER_DIRECT_INVOKE(OPAL_ASYNC_COMP, &msg);
break;
case OPAL_MSG_EPOW:
EVENTHANDLER_DIRECT_INVOKE(OPAL_EPOW, &msg);
break;
case OPAL_MSG_SHUTDOWN:
EVENTHANDLER_DIRECT_INVOKE(OPAL_SHUTDOWN, &msg);
break;
case OPAL_MSG_HMI_EVT:
EVENTHANDLER_DIRECT_INVOKE(OPAL_HMI_EVT, &msg);
break;
case OPAL_MSG_DPO:
EVENTHANDLER_DIRECT_INVOKE(OPAL_DPO, &msg);
break;
case OPAL_MSG_OCC:
EVENTHANDLER_DIRECT_INVOKE(OPAL_OCC, &msg);
break;
default:
printf("Unknown OPAL message type %d\n", type);
}
}
static void
opal_intr(void *xintr)
{
uint64_t events = 0;
opal_call(OPAL_HANDLE_INTERRUPT, (uint32_t)(uint64_t)xintr,
vtophys(&events));
/* Wake up the heartbeat, if it's been setup. */
if (events != 0 && opal_hb_proc != NULL)
wakeup(opal_hb_proc);
}