d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1831679c41
freebsd-nq/sys/dev/aic7xxx/aic79xx_osm.c
Justin T. Gibbs acae33b029 aic79xx.c: 
Clear the LQICRC_NLQ status should it pop up after we have
	already handled the SCSIPERR.  During some streaming operations
	this status can be delayed until the stream ends.  Without this
	change, the driver would complain about a "Missing case in
	ahd_handle_scsiint".

	In the LQOBUSFREE handler...

		Don't return the LQOMGR back to the idle state until after
		we have cleaned up ENSELO and any status related to this
		selection.  The last thing we need is the LQO manager starting
		another select-out before we have updated the execution queue.
		It is not clear whether the LQOMGR would, or would not
		start a new selection early.

		Make sure ENSELO is off prior to clearing SELDO by flushing
		device writes.

		Move assignment of the next target SCB pointer inside of
		an if to make the code clearer.  The effect is the same.

	Dump card state in both "Unexpected PKT busfree" paths.

	In ahd_reset(), set the chip to SCSI mode before reading SXFRCTL1.
	That register only exists in the SCSI mode.  Also set the mode
	explicitly to the SCSI mode after chip reset due to paranoia.
	Re-arrange code so that SXFRCTL1 is restored as quickly after the
	chip reset as possible.

	S/G structurs must be 8byte aligned.  Make this official by saying
	so in our DMA tag.

	Disable CIO bus stretch on MDFFSTAT if SHVALID is about to come
	true.  This can cause a CIO bus lockup if a PCI or PCI-X error
	occurs while the stretch is occurring - the host cannot service
	the PCI-X error since the CIO bus is locked out and SHVALID will
	never resolve.  The stretch was added in the Rev B to simplify the
	wait for SHVALID to resolve, but the code to do this in the open
	source sequencer is so simple it was never removed.

	Consistently use MAX_OFFSET for the user max syncrate set from
	non-volatile storage.  This ensures that the offset does not
	conflict with AH?_OFFSET_UNKNOWN.

	Have ahd_pause_and_flushwork set the mode to ensure that it has
	access to the registers it checks.  Also modify the checking of
	intstat so that the check against 0xFF can actually succeed if
	the INT_PEND mask is something other than 0xFF.  Although there
	are no cardbus U320 controllers, this check may be needed to
	recover from a hot-plug PCI removal that occurs without informing
	the driver.

	Fix a typo.  sg_prefetch_cnt -> sg_prefetch_align.  This fixes
	an infinite loop at card initialization if the cacheline size is 0.

aic79xx.h:
	Add AHD_EARLY_REQ_BUG bug flag.

	Fix spelling errors.

	Include the CDB's length just after the CDB pointer in the DMA'ed
	CDB case.

	Change AH?_OFFSET_UNKNOWN to 0xFF.  This is a value that the
	curr->offset can never be, unlike '0' which we previously used.
	This fixes code that only checks for a non-zero offset to
	determine if a sync negotiation is required since it will fire
	in the unknown case even if the goal is async.

aic79xx.reg:
	Add comments for LQISTAT bits indicating their names in the 7902
	data book.  We use slightly different and more descriptive names
	in the firmware.

	Fix spelling errors.

	Include the CDB's length just after the CDB pointer in the DMA'ed
	CDB case.

aic79xx.seq:
	Update comments regarding rundown of the GSFIFO to reflect reality.

	Fix spelling errors.

	Since we use an 8byte address and 1 byte length, shorten the size
	of a block move for the legacy DMA'ed CDB case from 11 to 9 bytes.

	Remove code that, assuming the abort pending feature worked, would
	set MK_MESSAGE in the SCB's control byte on completion to catch
	invalid reselections.  Since we don't see interrupts for completed
	selections, this status update could occur prior to us noticing the
	SELDO.  The "select-out" queue logic will get confused by the
	MK_MESSAGE bit being set as this is used to catch packatized
	connections where we select-out with ATN.  Since the abort pending
	feature doesn't work on any released controllers yet, this code was
	never executed.

	Add support for the AHD_EARLY_REQ_BUG.  Don't ignore persistent REQ
	assertions just because they were asserted within the bus settle delay
	window.  This allows us to tolerate devices like the GEM318 that
	violate the SCSI spec.

	Remove unintentional settnig of SG_CACHE_AVAIL.  Writing this bit
	should have no effect, but who knows...

	On the Rev A, we must wait for HDMAENACK before loading additional
	segments to avoid clobbering the address of the first segment in
	the S/G FIFO.  This resolves data-corruption issues with certain
	IBM (now Hitachi) and Fujitsu U320 drives.

	Rearrange calc_residual to avoid an extra jmp instruction.

	On RevA Silicon, if the target returns us to data-out after we
	have already trained for data-out, it is possible for us to
	transition the free running clock to data-valid before the required
	100ns P1 setup time (8 P1 assertions in fast-160 mode).  This will
	only happen if this L-Q is a continuation of a data transfer for
	which we have already prefetched data into our FIFO (LQ/Data
	followed by LQ/Data for the same write transaction).  This can
	cause some target implementations to miss the first few data
	transfers on the bus.  We detect this situation by noticing that
	this is the first data transfer after an LQ (LQIWORKONLQ true),
	that the data transfer is a continuation of a transfer already
	setup in our FIFO (SAVEPTRS interrupt), and that the transaction
	is a write (DIRECTION set in DFCNTRL). The delay is performed by
	disabling SCSIEN until we see the first REQ from the target.

	Only compile in snapshot savepointers handler for RevA silicon
	where it is enabled.

	Handle the cfg4icmd packetized interrupt.  We just need to load
	the address and count, start the DMA, and CLRCHN once the transfer
	is complete.

	Fix an oversight in the overrun handler for packetized status
	operations.  We need to wait for either CTXTDONE or an overrun
	when checking for an overrun.  The previous code did not wait
	and thus could decide that no overrun had occurred even though
	an overrun will occur on the next data-valid req.  Add some
	comment to this section for clarity.

	Use LAST_SEG_DONE instead of LASTSDONE for testing transfer
	completion in the packetized status case.  LASTSDONE may come up
	more quickly since it only records completion on the SCSI side,
	but since LAST_SEG_DONE is used everywhere else (and needs to be),
	this is less confusing.

	Add a missing invalidation of the longjmp address in the non-pack
	handler.  This code needs additional review.

aic79xx_inline.h:
	Fix spelling error.

aic79xx_osm.c:
	Set the cdb length for CDBs dma'ed from host memory.

	Add a comment indicating that, should CAM start supporting cdbs
	larger than 16bytes, the driver could store the CDB in the status
	buffer.

aic79xx_pci.c:
	Add a table entry for the 39320A.

	Added a missing comma to an error string table.

	Fix spelling errors.
2003-02-27 23:23:16 +00:00

2016 lines
51 KiB
C
Raw Blame History

/*
* Bus independent FreeBSD shim for the aic7xxx based adaptec SCSI controllers
*
* Copyright (c) 1994-2002 Justin T. Gibbs.
* Copyright (c) 2001-2002 Adaptec Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU Public License ("GPL").
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id: //depot/aic7xxx/freebsd/dev/aic7xxx/aic79xx_osm.c#26 $
*
* $FreeBSD$
*/
#include <dev/aic7xxx/aic79xx_osm.h>
#include <dev/aic7xxx/aic79xx_inline.h>
#include "opt_ddb.h"
#ifdef DDB
#include <ddb/ddb.h>
#endif
#ifndef AHD_TMODE_ENABLE
#define AHD_TMODE_ENABLE 0
#endif
#define ccb_scb_ptr spriv_ptr0
#if UNUSED
static void ahd_dump_targcmd(struct target_cmd *cmd);
#endif
static int ahd_modevent(module_t mod, int type, void *data);
static void ahd_action(struct cam_sim *sim, union ccb *ccb);
static void ahd_set_tran_settings(struct ahd_softc *ahd,
int our_id, char channel,
struct ccb_trans_settings *cts);
static void ahd_get_tran_settings(struct ahd_softc *ahd,
int our_id, char channel,
struct ccb_trans_settings *cts);
static void ahd_async(void *callback_arg, uint32_t code,
struct cam_path *path, void *arg);
static void ahd_execute_scb(void *arg, bus_dma_segment_t *dm_segs,
int nsegments, int error);
static void ahd_poll(struct cam_sim *sim);
static void ahd_setup_data(struct ahd_softc *ahd, struct cam_sim *sim,
struct ccb_scsiio *csio, struct scb *scb);
static void ahd_abort_ccb(struct ahd_softc *ahd, struct cam_sim *sim,
union ccb *ccb);
static int ahd_create_path(struct ahd_softc *ahd,
char channel, u_int target, u_int lun,
struct cam_path **path);
#if NOT_YET
static void ahd_set_recoveryscb(struct ahd_softc *ahd, struct scb *scb);
#endif
static int
ahd_create_path(struct ahd_softc *ahd, char channel, u_int target,
u_int lun, struct cam_path **path)
{
path_id_t path_id;
if (channel == 'B')
path_id = cam_sim_path(ahd->platform_data->sim_b);
else
path_id = cam_sim_path(ahd->platform_data->sim);
return (xpt_create_path(path, /*periph*/NULL,
path_id, target, lun));
}
int
ahd_map_int(struct ahd_softc *ahd)
{
int error;
/* Hook up our interrupt handler */
error = bus_setup_intr(ahd->dev_softc, ahd->platform_data->irq,
INTR_TYPE_CAM, ahd_platform_intr, ahd,
&ahd->platform_data->ih);
if (error != 0)
device_printf(ahd->dev_softc, "bus_setup_intr() failed: %d\n",
error);
return (error);
}
/*
* Attach all the sub-devices we can find
*/
int
ahd_attach(struct ahd_softc *ahd)
{
char ahd_info[256];
struct ccb_setasync csa;
struct cam_devq *devq;
struct cam_sim *sim;
struct cam_path *path;
long s;
int count;
count = 0;
sim = NULL;
ahd_controller_info(ahd, ahd_info);
printf("%s\n", ahd_info);
ahd_lock(ahd, &s);
/*
* Create the device queue for our SIM(s).
*/
devq = cam_simq_alloc(AHD_MAX_QUEUE);
if (devq == NULL)
goto fail;
/*
* Construct our SIM entry
*/
sim = cam_sim_alloc(ahd_action, ahd_poll, "ahd", ahd,
device_get_unit(ahd->dev_softc),
1, /*XXX*/256, devq);
if (sim == NULL) {
cam_simq_free(devq);
goto fail;
}
if (xpt_bus_register(sim, /*bus_id*/0) != CAM_SUCCESS) {
cam_sim_free(sim, /*free_devq*/TRUE);
sim = NULL;
goto fail;
}
if (xpt_create_path(&path, /*periph*/NULL,
cam_sim_path(sim), CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path(sim));
cam_sim_free(sim, /*free_devq*/TRUE);
sim = NULL;
goto fail;
}
xpt_setup_ccb(&csa.ccb_h, path, /*priority*/5);
csa.ccb_h.func_code = XPT_SASYNC_CB;
csa.event_enable = AC_LOST_DEVICE;
csa.callback = ahd_async;
csa.callback_arg = sim;
xpt_action((union ccb *)&csa);
count++;
fail:
ahd->platform_data->sim = sim;
ahd->platform_data->path = path;
if (count != 0) {
/* We have to wait until after any system dumps... */
ahd->platform_data->eh =
EVENTHANDLER_REGISTER(shutdown_final, ahd_shutdown,
ahd, SHUTDOWN_PRI_DEFAULT);
ahd_intr_enable(ahd, TRUE);
}
ahd_unlock(ahd, &s);
return (count);
}
/*
* Catch an interrupt from the adapter
*/
void
ahd_platform_intr(void *arg)
{
struct ahd_softc *ahd;
ahd = (struct ahd_softc *)arg;
ahd_intr(ahd);
}
/*
* We have an scb which has been processed by the
* adaptor, now we look to see how the operation
* went.
*/
void
ahd_done(struct ahd_softc *ahd, struct scb *scb)
{
union ccb *ccb;
CAM_DEBUG(scb->io_ctx->ccb_h.path, CAM_DEBUG_TRACE,
("ahd_done - scb %d\n", SCB_GET_TAG(scb)));
ccb = scb->io_ctx;
LIST_REMOVE(scb, pending_links);
untimeout(ahd_timeout, (caddr_t)scb, ccb->ccb_h.timeout_ch);
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
bus_dmasync_op_t op;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
op = BUS_DMASYNC_POSTREAD;
else
op = BUS_DMASYNC_POSTWRITE;
bus_dmamap_sync(ahd->buffer_dmat, scb->dmamap, op);
bus_dmamap_unload(ahd->buffer_dmat, scb->dmamap);
}
#ifdef AHD_TARGET_MODE
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
struct cam_path *ccb_path;
/*
* If we have finally disconnected, clean up our
* pending device state.
* XXX - There may be error states that cause where
* we will remain connected.
*/
ccb_path = ccb->ccb_h.path;
if (ahd->pending_device != NULL
&& xpt_path_comp(ahd->pending_device->path, ccb_path) == 0) {
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
ahd->pending_device = NULL;
} else {
xpt_print_path(ccb->ccb_h.path);
printf("Still disconnected\n");
ahd_freeze_ccb(ccb);
}
}
if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG)
ccb->ccb_h.status |= CAM_REQ_CMP;
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ahd_free_scb(ahd, scb);
xpt_done(ccb);
return;
}
#endif
/*
* If the recovery SCB completes, we have to be
* out of our timeout.
*/
if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
struct scb *list_scb;
/*
* We were able to complete the command successfully,
* so reinstate the timeouts for all other pending
* commands.
*/
LIST_FOREACH(list_scb, &ahd->pending_scbs, pending_links) {
union ccb *ccb;
uint64_t time;
ccb = list_scb->io_ctx;
if (ccb->ccb_h.timeout == CAM_TIME_INFINITY)
continue;
time = ccb->ccb_h.timeout;
time *= hz;
time /= 1000;
ccb->ccb_h.timeout_ch =
timeout(ahd_timeout, list_scb, time);
}
if (ahd_get_transaction_status(scb) == CAM_BDR_SENT
|| ahd_get_transaction_status(scb) == CAM_REQ_ABORTED)
ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
ahd_print_path(ahd, scb);
printf("no longer in timeout, status = %x\n",
ccb->ccb_h.status);
}
/* Don't clobber any existing error state */
if (ahd_get_transaction_status(scb) == CAM_REQ_INPROG) {
ccb->ccb_h.status |= CAM_REQ_CMP;
} else if ((scb->flags & SCB_SENSE) != 0) {
/*
* We performed autosense retrieval.
*
* Zero any sense not transferred by the
* device. The SCSI spec mandates that any
* untransfered data should be assumed to be
* zero. Complete the 'bounce' of sense information
* through buffers accessible via bus-space by
* copying it into the clients csio.
*/
memset(&ccb->csio.sense_data, 0, sizeof(ccb->csio.sense_data));
memcpy(&ccb->csio.sense_data,
ahd_get_sense_buf(ahd, scb),
/* XXX What size do we want to use??? */
sizeof(ccb->csio.sense_data)
- ccb->csio.sense_resid);
scb->io_ctx->ccb_h.status |= CAM_AUTOSNS_VALID;
} else if ((scb->flags & SCB_PKT_SENSE) != 0) {
struct scsi_status_iu_header *siu;
u_int sense_len;
int i;
/*
* Copy only the sense data into the provided buffer.
*/
siu = (struct scsi_status_iu_header *)scb->sense_data;
sense_len = MIN(scsi_4btoul(siu->sense_length),
sizeof(ccb->csio.sense_data));
memset(&ccb->csio.sense_data, 0, sizeof(ccb->csio.sense_data));
memcpy(&ccb->csio.sense_data,
ahd_get_sense_buf(ahd, scb) + SIU_SENSE_OFFSET(siu),
sense_len);
printf("Copied %d bytes of sense data offset %d:", sense_len,
SIU_SENSE_OFFSET(siu));
for (i = 0; i < sense_len; i++)
printf(" 0x%x", ((uint8_t *)&ccb->csio.sense_data)[i]);
printf("\n");
scb->io_ctx->ccb_h.status |= CAM_AUTOSNS_VALID;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ahd_free_scb(ahd, scb);
xpt_done(ccb);
}
static void
ahd_action(struct cam_sim *sim, union ccb *ccb)
{
struct ahd_softc *ahd;
#ifdef AHD_TARGET_MODE
struct ahd_tmode_lstate *lstate;
#endif
u_int target_id;
u_int our_id;
long s;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("ahd_action\n"));
ahd = (struct ahd_softc *)cam_sim_softc(sim);
target_id = ccb->ccb_h.target_id;
our_id = SIM_SCSI_ID(ahd, sim);
switch (ccb->ccb_h.func_code) {
/* Common cases first */
#ifdef AHD_TARGET_MODE
case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */
case XPT_CONT_TARGET_IO:/* Continue Host Target I/O Connection*/
{
struct ahd_tmode_tstate *tstate;
cam_status status;
status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate,
&lstate, TRUE);
if (status != CAM_REQ_CMP) {
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
/* Response from the black hole device */
tstate = NULL;
lstate = ahd->black_hole;
} else {
ccb->ccb_h.status = status;
xpt_done(ccb);
break;
}
}
if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
ahd_lock(ahd, &s);
SLIST_INSERT_HEAD(&lstate->accept_tios, &ccb->ccb_h,
sim_links.sle);
ccb->ccb_h.status = CAM_REQ_INPROG;
if ((ahd->flags & AHD_TQINFIFO_BLOCKED) != 0)
ahd_run_tqinfifo(ahd, /*paused*/FALSE);
ahd_unlock(ahd, &s);
break;
}
/*
* The target_id represents the target we attempt to
* select. In target mode, this is the initiator of
* the original command.
*/
our_id = target_id;
target_id = ccb->csio.init_id;
/* FALLTHROUGH */
}
#endif
case XPT_SCSI_IO: /* Execute the requested I/O operation */
case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
{
struct scb *scb;
struct hardware_scb *hscb;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
u_int col_idx;
if ((ahd->flags & AHD_INITIATORROLE) == 0
&& (ccb->ccb_h.func_code == XPT_SCSI_IO
|| ccb->ccb_h.func_code == XPT_RESET_DEV)) {
ccb->ccb_h.status = CAM_PROVIDE_FAIL;
xpt_done(ccb);
return;
}
/*
* get an scb to use.
*/
ahd_lock(ahd, &s);
tinfo = ahd_fetch_transinfo(ahd, 'A', our_id,
target_id, &tstate);
if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) == 0
|| (tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0
|| ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
col_idx = AHD_NEVER_COL_IDX;
} else {
col_idx = AHD_BUILD_COL_IDX(target_id,
ccb->ccb_h.target_lun);
}
if ((scb = ahd_get_scb(ahd, col_idx)) == NULL) {
xpt_freeze_simq(sim, /*count*/1);
ahd->flags |= AHD_RESOURCE_SHORTAGE;
ahd_unlock(ahd, &s);
ccb->ccb_h.status = CAM_REQUEUE_REQ;
xpt_done(ccb);
return;
}
ahd_unlock(ahd, &s);
hscb = scb->hscb;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_SUBTRACE,
("start scb(%p)\n", scb));
scb->io_ctx = ccb;
/*
* So we can find the SCB when an abort is requested
*/
ccb->ccb_h.ccb_scb_ptr = scb;
/*
* Put all the arguments for the xfer in the scb
*/
hscb->control = 0;
hscb->scsiid = BUILD_SCSIID(ahd, sim, target_id, our_id);
hscb->lun = ccb->ccb_h.target_lun;
if (ccb->ccb_h.func_code == XPT_RESET_DEV) {
hscb->cdb_len = 0;
scb->flags |= SCB_DEVICE_RESET;
hscb->control |= MK_MESSAGE;
hscb->task_management = SIU_TASKMGMT_LUN_RESET;
ahd_execute_scb(scb, NULL, 0, 0);
} else {
#ifdef AHD_TARGET_MODE
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
struct target_data *tdata;
tdata = &hscb->shared_data.tdata;
if (ahd->pending_device == lstate)
scb->flags |= SCB_TARGET_IMMEDIATE;
hscb->control |= TARGET_SCB;
tdata->target_phases = 0;
if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
tdata->target_phases |= SPHASE_PENDING;
tdata->scsi_status =
ccb->csio.scsi_status;
}
if (ccb->ccb_h.flags & CAM_DIS_DISCONNECT)
tdata->target_phases |= NO_DISCONNECT;
tdata->initiator_tag =
ahd_htole16(ccb->csio.tag_id);
}
#endif
hscb->task_management = 0;
if (ccb->ccb_h.flags & CAM_TAG_ACTION_VALID)
hscb->control |= ccb->csio.tag_action;
ahd_setup_data(ahd, sim, &ccb->csio, scb);
}
break;
}
#ifdef AHD_TARGET_MODE
case XPT_NOTIFY_ACK:
case XPT_IMMED_NOTIFY:
{
struct ahd_tmode_tstate *tstate;
struct ahd_tmode_lstate *lstate;
cam_status status;
status = ahd_find_tmode_devs(ahd, sim, ccb, &tstate,
&lstate, TRUE);
if (status != CAM_REQ_CMP) {
ccb->ccb_h.status = status;
xpt_done(ccb);
break;
}
SLIST_INSERT_HEAD(&lstate->immed_notifies, &ccb->ccb_h,
sim_links.sle);
ccb->ccb_h.status = CAM_REQ_INPROG;
ahd_send_lstate_events(ahd, lstate);
break;
}
case XPT_EN_LUN: /* Enable LUN as a target */
ahd_handle_en_lun(ahd, sim, ccb);
xpt_done(ccb);
break;
#endif
case XPT_ABORT: /* Abort the specified CCB */
{
ahd_abort_ccb(ahd, sim, ccb);
break;
}
case XPT_SET_TRAN_SETTINGS:
{
ahd_lock(ahd, &s);
ahd_set_tran_settings(ahd, SIM_SCSI_ID(ahd, sim),
SIM_CHANNEL(ahd, sim), &ccb->cts);
ahd_unlock(ahd, &s);
xpt_done(ccb);
break;
}
case XPT_GET_TRAN_SETTINGS:
/* Get default/user set transfer settings for the target */
{
ahd_lock(ahd, &s);
ahd_get_tran_settings(ahd, SIM_SCSI_ID(ahd, sim),
SIM_CHANNEL(ahd, sim), &ccb->cts);
ahd_unlock(ahd, &s);
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
uint32_t size_mb;
uint32_t secs_per_cylinder;
int extended;
ccg = &ccb->ccg;
size_mb = ccg->volume_size
/ ((1024L * 1024L) / ccg->block_size);
extended = ahd->flags & AHD_EXTENDED_TRANS_A;
if (size_mb > 1024 && extended) {
ccg->heads = 255;
ccg->secs_per_track = 63;
} else {
ccg->heads = 64;
ccg->secs_per_track = 32;
}
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
{
int found;
ahd_lock(ahd, &s);
found = ahd_reset_channel(ahd, SIM_CHANNEL(ahd, sim),
/*initiate reset*/TRUE);
ahd_unlock(ahd, &s);
if (bootverbose) {
xpt_print_path(SIM_PATH(ahd, sim));
printf("SCSI bus reset delivered. "
"%d SCBs aborted.\n", found);
}
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_TERM_IO: /* Terminate the I/O process */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE;
if ((ahd->features & AHD_WIDE) != 0)
cpi->hba_inquiry |= PI_WIDE_16;
if ((ahd->features & AHD_TARGETMODE) != 0) {
cpi->target_sprt = PIT_PROCESSOR
| PIT_DISCONNECT
| PIT_TERM_IO;
} else {
cpi->target_sprt = 0;
}
cpi->hba_misc = 0;
cpi->hba_eng_cnt = 0;
cpi->max_target = (ahd->features & AHD_WIDE) ? 15 : 7;
cpi->max_lun = AHD_NUM_LUNS - 1;
cpi->initiator_id = ahd->our_id;
if ((ahd->flags & AHD_RESET_BUS_A) == 0) {
cpi->hba_misc |= PIM_NOBUSRESET;
}
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
#ifdef AHD_NEW_TRAN_SETTINGS
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_2;
cpi->transport = XPORT_SPI;
cpi->transport_version = 2;
cpi->xport_specific.spi.ppr_options = SID_SPI_CLOCK_ST;
cpi->transport_version = 4;
cpi->xport_specific.spi.ppr_options = SID_SPI_CLOCK_DT_ST;
#endif
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_PROVIDE_FAIL;
xpt_done(ccb);
break;
}
}
static void
ahd_set_tran_settings(struct ahd_softc *ahd, int our_id, char channel,
struct ccb_trans_settings *cts)
{
#ifdef AHD_NEW_TRAN_SETTINGS
struct ahd_devinfo devinfo;
struct ccb_trans_settings_scsi *scsi;
struct ccb_trans_settings_spi *spi;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
uint16_t *discenable;
uint16_t *tagenable;
u_int update_type;
scsi = &cts->proto_specific.scsi;
spi = &cts->xport_specific.spi;
ahd_compile_devinfo(&devinfo, SIM_SCSI_ID(ahd, sim),
cts->ccb_h.target_id,
cts->ccb_h.target_lun,
SIM_CHANNEL(ahd, sim),
ROLE_UNKNOWN);
tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
update_type = 0;
if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
update_type |= AHD_TRANS_GOAL;
discenable = &tstate->discenable;
tagenable = &tstate->tagenable;
tinfo->curr.protocol_version = cts->protocol_version;
tinfo->curr.transport_version = cts->transport_version;
tinfo->goal.protocol_version = cts->protocol_version;
tinfo->goal.transport_version = cts->transport_version;
} else if (cts->type == CTS_TYPE_USER_SETTINGS) {
update_type |= AHD_TRANS_USER;
discenable = &ahd->user_discenable;
tagenable = &ahd->user_tagenable;
tinfo->user.protocol_version = cts->protocol_version;
tinfo->user.transport_version = cts->transport_version;
} else {
cts->ccb_h.status = CAM_REQ_INVALID;
return;
}
if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0)
*discenable |= devinfo.target_mask;
else
*discenable &= ~devinfo.target_mask;
}
if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
*tagenable |= devinfo.target_mask;
else
*tagenable &= ~devinfo.target_mask;
}
if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) {
ahd_validate_width(ahd, /*tinfo limit*/NULL,
&spi->bus_width, ROLE_UNKNOWN);
ahd_set_width(ahd, &devinfo, spi->bus_width,
update_type, /*paused*/FALSE);
}
if ((spi->valid & CTS_SPI_VALID_PPR_OPTIONS) == 0) {
if (update_type == AHD_TRANS_USER)
spi->ppr_options = tinfo->user.ppr_options;
else
spi->ppr_options = tinfo->goal.ppr_options;
}
if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0) {
if (update_type == AHD_TRANS_USER)
spi->sync_offset = tinfo->user.offset;
else
spi->sync_offset = tinfo->goal.offset;
}
if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0) {
if (update_type == AHD_TRANS_USER)
spi->sync_period = tinfo->user.period;
else
spi->sync_period = tinfo->goal.period;
}
if (((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0)
|| ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)) {
u_int maxsync;
maxsync = AHD_SYNCRATE_MAX;
if (spi->bus_width != MSG_EXT_WDTR_BUS_16_BIT)
spi->ppr_options &= ~MSG_EXT_PPR_DT_REQ;
if ((*discenable & devinfo.target_mask) == 0)
spi->ppr_options &= ~MSG_EXT_PPR_IU_REQ;
ahd_find_syncrate(ahd, &spi->sync_period,
&spi->ppr_options, maxsync);
ahd_validate_offset(ahd, /*tinfo limit*/NULL,
spi->sync_period, &spi->sync_offset,
spi->bus_width, ROLE_UNKNOWN);
/* We use a period of 0 to represent async */
if (spi->sync_offset == 0) {
spi->sync_period = 0;
spi->ppr_options = 0;
}
ahd_set_syncrate(ahd, &devinfo, spi->sync_period,
spi->sync_offset, spi->ppr_options,
update_type, /*paused*/FALSE);
}
cts->ccb_h.status = CAM_REQ_CMP;
#else
struct ahd_devinfo devinfo;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
uint16_t *discenable;
uint16_t *tagenable;
u_int update_type;
ahd_compile_devinfo(&devinfo, SIM_SCSI_ID(ahd, sim),
cts->ccb_h.target_id,
cts->ccb_h.target_lun,
SIM_CHANNEL(ahd, sim),
ROLE_UNKNOWN);
tinfo = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
update_type = 0;
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0) {
update_type |= AHD_TRANS_GOAL;
discenable = &tstate->discenable;
tagenable = &tstate->tagenable;
} else if ((cts->flags & CCB_TRANS_USER_SETTINGS) != 0) {
update_type |= AHD_TRANS_USER;
discenable = &ahd->user_discenable;
tagenable = &ahd->user_tagenable;
} else {
cts->ccb_h.status = CAM_REQ_INVALID;
return;
}
if ((cts->valid & CCB_TRANS_DISC_VALID) != 0) {
if ((cts->flags & CCB_TRANS_DISC_ENB) != 0)
*discenable |= devinfo.target_mask;
else
*discenable &= ~devinfo.target_mask;
}
if ((cts->valid & CCB_TRANS_TQ_VALID) != 0) {
if ((cts->flags & CCB_TRANS_TAG_ENB) != 0)
*tagenable |= devinfo.target_mask;
else
*tagenable &= ~devinfo.target_mask;
}
if ((cts->valid & CCB_TRANS_BUS_WIDTH_VALID) != 0) {
ahd_validate_width(ahd, /*tinfo limit*/NULL,
&cts->bus_width, ROLE_UNKNOWN);
ahd_set_width(ahd, &devinfo, cts->bus_width,
update_type, /*paused*/FALSE);
}
if ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) == 0) {
if (update_type == AHD_TRANS_USER)
cts->sync_offset = tinfo->user.offset;
else
cts->sync_offset = tinfo->goal.offset;
}
if ((cts->valid & CCB_TRANS_SYNC_RATE_VALID) == 0) {
if (update_type == AHD_TRANS_USER)
cts->sync_period = tinfo->user.period;
else
cts->sync_period = tinfo->goal.period;
}
if (((cts->valid & CCB_TRANS_SYNC_RATE_VALID) != 0)
|| ((cts->valid & CCB_TRANS_SYNC_OFFSET_VALID) != 0)
|| ((cts->valid & CCB_TRANS_TQ_VALID) != 0)
|| ((cts->valid & CCB_TRANS_DISC_VALID) != 0)) {
u_int ppr_options;
u_int maxsync;
maxsync = AHD_SYNCRATE_MAX;
ppr_options = 0;
if (cts->sync_period <= AHD_SYNCRATE_DT
&& cts->bus_width == MSG_EXT_WDTR_BUS_16_BIT) {
ppr_options = tinfo->user.ppr_options
| MSG_EXT_PPR_DT_REQ;
}
if ((*tagenable & devinfo.target_mask) == 0
|| (*discenable & devinfo.target_mask) == 0)
ppr_options &= ~MSG_EXT_PPR_IU_REQ;
ahd_find_syncrate(ahd, &cts->sync_period,
&ppr_options, maxsync);
ahd_validate_offset(ahd, /*tinfo limit*/NULL,
cts->sync_period, &cts->sync_offset,
MSG_EXT_WDTR_BUS_8_BIT,
ROLE_UNKNOWN);
/* We use a period of 0 to represent async */
if (cts->sync_offset == 0) {
cts->sync_period = 0;
ppr_options = 0;
}
if (ppr_options != 0
&& tinfo->user.transport_version >= 3) {
tinfo->goal.transport_version =
tinfo->user.transport_version;
tinfo->curr.transport_version =
tinfo->user.transport_version;
}
ahd_set_syncrate(ahd, &devinfo, cts->sync_period,
cts->sync_offset, ppr_options,
update_type, /*paused*/FALSE);
}
cts->ccb_h.status = CAM_REQ_CMP;
#endif
}
static void
ahd_get_tran_settings(struct ahd_softc *ahd, int our_id, char channel,
struct ccb_trans_settings *cts)
{
#ifdef AHD_NEW_TRAN_SETTINGS
struct ahd_devinfo devinfo;
struct ccb_trans_settings_scsi *scsi;
struct ccb_trans_settings_spi *spi;
struct ahd_initiator_tinfo *targ_info;
struct ahd_tmode_tstate *tstate;
struct ahd_transinfo *tinfo;
scsi = &cts->proto_specific.scsi;
spi = &cts->xport_specific.spi;
ahd_compile_devinfo(&devinfo, our_id,
cts->ccb_h.target_id,
cts->ccb_h.target_lun,
channel, ROLE_UNKNOWN);
targ_info = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
tinfo = &targ_info->curr;
else
tinfo = &targ_info->user;
scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
if (cts->type == CTS_TYPE_USER_SETTINGS) {
if ((ahd->user_discenable & devinfo.target_mask) != 0)
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
if ((ahd->user_tagenable & devinfo.target_mask) != 0)
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
} else {
if ((tstate->discenable & devinfo.target_mask) != 0)
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
if ((tstate->tagenable & devinfo.target_mask) != 0)
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
}
cts->protocol_version = tinfo->protocol_version;
cts->transport_version = tinfo->transport_version;
spi->sync_period = tinfo->period;
spi->sync_offset = tinfo->offset;
spi->bus_width = tinfo->width;
spi->ppr_options = tinfo->ppr_options;
cts->protocol = PROTO_SCSI;
cts->transport = XPORT_SPI;
spi->valid = CTS_SPI_VALID_SYNC_RATE
| CTS_SPI_VALID_SYNC_OFFSET
| CTS_SPI_VALID_BUS_WIDTH
| CTS_SPI_VALID_PPR_OPTIONS;
if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD) {
scsi->valid = CTS_SCSI_VALID_TQ;
spi->valid |= CTS_SPI_VALID_DISC;
} else {
scsi->valid = 0;
}
cts->ccb_h.status = CAM_REQ_CMP;
#else
struct ahd_devinfo devinfo;
struct ahd_initiator_tinfo *targ_info;
struct ahd_tmode_tstate *tstate;
struct ahd_transinfo *tinfo;
ahd_compile_devinfo(&devinfo, our_id,
cts->ccb_h.target_id,
cts->ccb_h.target_lun,
channel, ROLE_UNKNOWN);
targ_info = ahd_fetch_transinfo(ahd, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) != 0)
tinfo = &targ_info->curr;
else
tinfo = &targ_info->user;
cts->flags &= ~(CCB_TRANS_DISC_ENB|CCB_TRANS_TAG_ENB);
if ((cts->flags & CCB_TRANS_CURRENT_SETTINGS) == 0) {
if ((ahd->user_discenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_DISC_ENB;
if ((ahd->user_tagenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_TAG_ENB;
} else {
if ((tstate->discenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_DISC_ENB;
if ((tstate->tagenable & devinfo.target_mask) != 0)
cts->flags |= CCB_TRANS_TAG_ENB;
}
cts->sync_period = tinfo->period;
cts->sync_offset = tinfo->offset;
cts->bus_width = tinfo->width;
cts->valid = CCB_TRANS_SYNC_RATE_VALID
| CCB_TRANS_SYNC_OFFSET_VALID
| CCB_TRANS_BUS_WIDTH_VALID;
if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD)
cts->valid |= CCB_TRANS_DISC_VALID|CCB_TRANS_TQ_VALID;
cts->ccb_h.status = CAM_REQ_CMP;
#endif
}
static void
ahd_async(void *callback_arg, uint32_t code, struct cam_path *path, void *arg)
{
struct ahd_softc *ahd;
struct cam_sim *sim;
sim = (struct cam_sim *)callback_arg;
ahd = (struct ahd_softc *)cam_sim_softc(sim);
switch (code) {
case AC_LOST_DEVICE:
{
struct ahd_devinfo devinfo;
long s;
ahd_compile_devinfo(&devinfo, SIM_SCSI_ID(ahd, sim),
xpt_path_target_id(path),
xpt_path_lun_id(path),
SIM_CHANNEL(ahd, sim),
ROLE_UNKNOWN);
/*
* Revert to async/narrow transfers
* for the next device.
*/
ahd_lock(ahd, &s);
ahd_set_width(ahd, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
AHD_TRANS_GOAL|AHD_TRANS_CUR, /*paused*/FALSE);
ahd_set_syncrate(ahd, &devinfo, /*period*/0, /*offset*/0,
/*ppr_options*/0, AHD_TRANS_GOAL|AHD_TRANS_CUR,
/*paused*/FALSE);
ahd_unlock(ahd, &s);
break;
}
default:
break;
}
}
static void
ahd_execute_scb(void *arg, bus_dma_segment_t *dm_segs, int nsegments,
int error)
{
struct scb *scb;
union ccb *ccb;
struct ahd_softc *ahd;
struct ahd_initiator_tinfo *tinfo;
struct ahd_tmode_tstate *tstate;
u_int mask;
u_long s;
scb = (struct scb *)arg;
ccb = scb->io_ctx;
ahd = scb->ahd_softc;
if (error != 0) {
if (error == EFBIG)
ahd_set_transaction_status(scb, CAM_REQ_TOO_BIG);
else
ahd_set_transaction_status(scb, CAM_REQ_CMP_ERR);
if (nsegments != 0)
bus_dmamap_unload(ahd->buffer_dmat, scb->dmamap);
ahd_lock(ahd, &s);
ahd_free_scb(ahd, scb);
ahd_unlock(ahd, &s);
xpt_done(ccb);
return;
}
scb->sg_count = 0;
if (nsegments != 0) {
void *sg;
bus_dmasync_op_t op;
u_int i;
/* Copy the segments into our SG list */
for (i = nsegments, sg = scb->sg_list; i > 0; i--) {
sg = ahd_sg_setup(ahd, scb, sg, dm_segs->ds_addr,
dm_segs->ds_len,
/*last*/i == 1);
dm_segs++;
}
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
op = BUS_DMASYNC_PREREAD;
else
op = BUS_DMASYNC_PREWRITE;
bus_dmamap_sync(ahd->buffer_dmat, scb->dmamap, op);
if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
struct target_data *tdata;
tdata = &scb->hscb->shared_data.tdata;
tdata->target_phases |= DPHASE_PENDING;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
tdata->data_phase = P_DATAOUT;
else
tdata->data_phase = P_DATAIN;
}
}
ahd_lock(ahd, &s);
/*
* Last time we need to check if this SCB needs to
* be aborted.
*/
if (ahd_get_transaction_status(scb) != CAM_REQ_INPROG) {
if (nsegments != 0)
bus_dmamap_unload(ahd->buffer_dmat,
scb->dmamap);
ahd_free_scb(ahd, scb);
ahd_unlock(ahd, &s);
xpt_done(ccb);
return;
}
tinfo = ahd_fetch_transinfo(ahd, SCSIID_CHANNEL(ahd, scb->hscb->scsiid),
SCSIID_OUR_ID(scb->hscb->scsiid),
SCSIID_TARGET(ahd, scb->hscb->scsiid),
&tstate);
mask = SCB_GET_TARGET_MASK(ahd, scb);
if ((tstate->discenable & mask) != 0
&& (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) == 0)
scb->hscb->control |= DISCENB;
if ((tinfo->curr.ppr_options & MSG_EXT_PPR_IU_REQ) != 0) {
scb->flags |= SCB_PACKETIZED;
if (scb->hscb->task_management != 0)
scb->hscb->control &= ~MK_MESSAGE;
}
if ((ccb->ccb_h.flags & CAM_NEGOTIATE) != 0
&& (tinfo->goal.width != 0
|| tinfo->goal.period != 0
|| tinfo->goal.ppr_options != 0)) {
scb->flags |= SCB_NEGOTIATE;
scb->hscb->control |= MK_MESSAGE;
} else if ((tstate->auto_negotiate & mask) != 0) {
scb->flags |= SCB_AUTO_NEGOTIATE;
scb->hscb->control |= MK_MESSAGE;
}
LIST_INSERT_HEAD(&ahd->pending_scbs, scb, pending_links);
ccb->ccb_h.status |= CAM_SIM_QUEUED;
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY) {
uint64_t time;
if (ccb->ccb_h.timeout == CAM_TIME_DEFAULT)
ccb->ccb_h.timeout = 5 * 1000;
time = ccb->ccb_h.timeout;
time *= hz;
time /= 1000;
ccb->ccb_h.timeout_ch =
timeout(ahd_timeout, (caddr_t)scb, time);
}
if ((scb->flags & SCB_TARGET_IMMEDIATE) != 0) {
/* Define a mapping from our tag to the SCB. */
ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = scb;
ahd_pause(ahd);
ahd_set_scbptr(ahd, SCB_GET_TAG(scb));
ahd_outb(ahd, RETURN_1, CONT_MSG_LOOP_TARG);
ahd_unpause(ahd);
} else {
ahd_queue_scb(ahd, scb);
}
ahd_unlock(ahd, &s);
}
static void
ahd_poll(struct cam_sim *sim)
{
ahd_intr(cam_sim_softc(sim));
}
static void
ahd_setup_data(struct ahd_softc *ahd, struct cam_sim *sim,
struct ccb_scsiio *csio, struct scb *scb)
{
struct hardware_scb *hscb;
struct ccb_hdr *ccb_h;
hscb = scb->hscb;
ccb_h = &csio->ccb_h;
csio->resid = 0;
csio->sense_resid = 0;
if (ccb_h->func_code == XPT_SCSI_IO) {
hscb->cdb_len = csio->cdb_len;
if ((ccb_h->flags & CAM_CDB_POINTER) != 0) {
if (hscb->cdb_len > MAX_CDB_LEN
&& (ccb_h->flags & CAM_CDB_PHYS) == 0) {
u_long s;
/*
* Should CAM start to support CDB sizes
* greater than 16 bytes, we could use
* the sense buffer to store the CDB.
*/
ahd_set_transaction_status(scb,
CAM_REQ_INVALID);
ahd_lock(ahd, &s);
ahd_free_scb(ahd, scb);
ahd_unlock(ahd, &s);
xpt_done((union ccb *)csio);
return;
}
if ((ccb_h->flags & CAM_CDB_PHYS) != 0) {
hscb->shared_data.idata.cdb_from_host.cdbptr =
ahd_htole64((uintptr_t)csio->cdb_io.cdb_ptr);
hscb->shared_data.idata.cdb_from_host.cdblen =
csio->cdb_len;
hscb->cdb_len |= SCB_CDB_LEN_PTR;
} else {
memcpy(hscb->shared_data.idata.cdb,
csio->cdb_io.cdb_ptr,
hscb->cdb_len);
}
} else {
if (hscb->cdb_len > MAX_CDB_LEN) {
u_long s;
ahd_set_transaction_status(scb,
CAM_REQ_INVALID);
ahd_lock(ahd, &s);
ahd_free_scb(ahd, scb);
ahd_unlock(ahd, &s);
xpt_done((union ccb *)csio);
return;
}
memcpy(hscb->shared_data.idata.cdb,
csio->cdb_io.cdb_bytes, hscb->cdb_len);
}
}
/* Only use S/G if there is a transfer */
if ((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
if ((ccb_h->flags & CAM_SCATTER_VALID) == 0) {
/* We've been given a pointer to a single buffer */
if ((ccb_h->flags & CAM_DATA_PHYS) == 0) {
int s;
int error;
s = splsoftvm();
error = bus_dmamap_load(ahd->buffer_dmat,
scb->dmamap,
csio->data_ptr,
csio->dxfer_len,
ahd_execute_scb,
scb, /*flags*/0);
if (error == EINPROGRESS) {
/*
* So as to maintain ordering,
* freeze the controller queue
* until our mapping is
* returned.
*/
xpt_freeze_simq(sim,
/*count*/1);
scb->io_ctx->ccb_h.status |=
CAM_RELEASE_SIMQ;
}
splx(s);
} else {
struct bus_dma_segment seg;
/* Pointer to physical buffer */
if (csio->dxfer_len > AHD_MAXTRANSFER_SIZE)
panic("ahd_setup_data - Transfer size "
"larger than can device max");
seg.ds_addr = (bus_addr_t)csio->data_ptr;
seg.ds_len = csio->dxfer_len;
ahd_execute_scb(scb, &seg, 1, 0);
}
} else {
struct bus_dma_segment *segs;
if ((ccb_h->flags & CAM_DATA_PHYS) != 0)
panic("ahd_setup_data - Physical segment "
"pointers unsupported");
if ((ccb_h->flags & CAM_SG_LIST_PHYS) == 0)
panic("ahd_setup_data - Virtual segment "
"addresses unsupported");
/* Just use the segments provided */
segs = (struct bus_dma_segment *)csio->data_ptr;
ahd_execute_scb(scb, segs, csio->sglist_cnt, 0);
}
} else {
ahd_execute_scb(scb, NULL, 0, 0);
}
}
#if NOT_YET
static void
ahd_set_recoveryscb(struct ahd_softc *ahd, struct scb *scb) {
if ((scb->flags & SCB_RECOVERY_SCB) == 0) {
struct scb *list_scb;
scb->flags |= SCB_RECOVERY_SCB;
/*
* Take all queued, but not sent SCBs out of the equation.
* Also ensure that no new CCBs are queued to us while we
* try to fix this problem.
*/
if ((scb->io_ctx->ccb_h.status & CAM_RELEASE_SIMQ) == 0) {
xpt_freeze_simq(SCB_GET_SIM(ahd, scb), /*count*/1);
scb->io_ctx->ccb_h.status |= CAM_RELEASE_SIMQ;
}
/*
* Go through all of our pending SCBs and remove
* any scheduled timeouts for them. We will reschedule
* them after we've successfully fixed this problem.
*/
LIST_FOREACH(list_scb, &ahd->pending_scbs, pending_links) {
union ccb *ccb;
ccb = list_scb->io_ctx;
untimeout(ahd_timeout, list_scb, ccb->ccb_h.timeout_ch);
}
}
}
#endif
void
ahd_timeout(void *arg)
{
struct scb *scb;
struct ahd_softc *ahd;
ahd_mode_state saved_modes;
long s;
int target;
int lun;
char channel;
#if NOT_YET
int i;
int found;
u_int last_phase;
#endif
scb = (struct scb *)arg;
ahd = (struct ahd_softc *)scb->ahd_softc;
ahd_lock(ahd, &s);
ahd_pause_and_flushwork(ahd);
saved_modes = ahd_save_modes(ahd);
#if 0
ahd_set_modes(ahd, AHD_MODE_SCSI, AHD_MODE_SCSI);
ahd_outb(ahd, SCSISIGO, ACKO);
printf("set ACK\n");
ahd_outb(ahd, SCSISIGO, 0);
printf("clearing Ack\n");
ahd_restore_modes(ahd, saved_modes);
#endif
if ((scb->flags & SCB_ACTIVE) == 0) {
/* Previous timeout took care of me already */
printf("%s: Timedout SCB already complete. "
"Interrupts may not be functioning.\n", ahd_name(ahd));
ahd_unpause(ahd);
ahd_unlock(ahd, &s);
return;
}
target = SCB_GET_TARGET(ahd, scb);
channel = SCB_GET_CHANNEL(ahd, scb);
lun = SCB_GET_LUN(scb);
ahd_print_path(ahd, scb);
printf("SCB 0x%x - timed out\n", SCB_GET_TAG(scb));
ahd_dump_card_state(ahd);
ahd_reset_channel(ahd, SIM_CHANNEL(ahd, sim),
/*initiate reset*/TRUE);
ahd_unlock(ahd, &s);
return;
#if NOT_YET
last_phase = ahd_inb(ahd, LASTPHASE);
if (scb->sg_count > 0) {
for (i = 0; i < scb->sg_count; i++) {
printf("sg[%d] - Addr 0x%x : Length %d\n",
i,
((struct ahd_dma_seg *)scb->sg_list)[i].addr,
((struct ahd_dma_seg *)scb->sg_list)[i].len
& AHD_SG_LEN_MASK);
}
}
if (scb->flags & (SCB_DEVICE_RESET|SCB_ABORT)) {
/*
* Been down this road before.
* Do a full bus reset.
*/
bus_reset:
ahd_set_transaction_status(scb, CAM_CMD_TIMEOUT);
found = ahd_reset_channel(ahd, channel, /*Initiate Reset*/TRUE);
printf("%s: Issued Channel %c Bus Reset. "
"%d SCBs aborted\n", ahd_name(ahd), channel, found);
} else {
/*
* If we are a target, transition to bus free and report
* the timeout.
*
* The target/initiator that is holding up the bus may not
* be the same as the one that triggered this timeout
* (different commands have different timeout lengths).
* If the bus is idle and we are actiing as the initiator
* for this request, queue a BDR message to the timed out
* target. Otherwise, if the timed out transaction is
* active:
* Initiator transaction:
* Stuff the message buffer with a BDR message and assert
* ATN in the hopes that the target will let go of the bus
* and go to the mesgout phase. If this fails, we'll
* get another timeout 2 seconds later which will attempt
* a bus reset.
*
* Target transaction:
* Transition to BUS FREE and report the error.
* It's good to be the target!
*/
u_int active_scb_index;
u_int saved_scbptr;
saved_scbptr = ahd_get_scbptr(ahd);
active_scb_index = saved_scbptr;
if (last_phase != P_BUSFREE
&& (ahd_inb(ahd, SEQ_FLAGS) & NOT_IDENTIFIED) == 0
&& (active_scb_index < ahd->scb_data.numscbs)) {
struct scb *active_scb;
/*
* If the active SCB is not us, assume that
* the active SCB has a longer timeout than
* the timedout SCB, and wait for the active
* SCB to timeout.
*/
active_scb = ahd_lookup_scb(ahd, active_scb_index);
if (active_scb != scb) {
struct ccb_hdr *ccbh;
uint64_t newtimeout;
ahd_print_path(ahd, scb);
printf("Other SCB Timeout%s",
(scb->flags & SCB_OTHERTCL_TIMEOUT) != 0
? " again\n" : "\n");
scb->flags |= SCB_OTHERTCL_TIMEOUT;
newtimeout =
MAX(active_scb->io_ctx->ccb_h.timeout,
scb->io_ctx->ccb_h.timeout);
newtimeout *= hz;
newtimeout /= 1000;
ccbh = &scb->io_ctx->ccb_h;
scb->io_ctx->ccb_h.timeout_ch =
timeout(ahd_timeout, scb, newtimeout);
ahd_unpause(ahd);
ahd_unlock(ahd, &s);
return;
}
/* It's us */
if ((scb->hscb->control & TARGET_SCB) != 0) {
/*
* Send back any queued up transactions
* and properly record the error condition.
*/
ahd_abort_scbs(ahd, SCB_GET_TARGET(ahd, scb),
SCB_GET_CHANNEL(ahd, scb),
SCB_GET_LUN(scb),
SCB_GET_TAG(scb),
ROLE_TARGET,
CAM_CMD_TIMEOUT);
/* Will clear us from the bus */
ahd_restart(ahd);
ahd_unlock(ahd, &s);
return;
}
ahd_set_recoveryscb(ahd, active_scb);
ahd_outb(ahd, MSG_OUT, HOST_MSG);
ahd_outb(ahd, SCSISIGO, last_phase|ATNO);
ahd_print_path(ahd, active_scb);
printf("BDR message in message buffer\n");
active_scb->flags |= SCB_DEVICE_RESET;
active_scb->io_ctx->ccb_h.timeout_ch =
timeout(ahd_timeout, (caddr_t)active_scb, 2 * hz);
ahd_unpause(ahd);
} else {
int disconnected;
/* XXX Shouldn't panic. Just punt instead? */
if ((scb->hscb->control & TARGET_SCB) != 0)
panic("Timed-out target SCB but bus idle");
if (last_phase != P_BUSFREE
&& (ahd_inb(ahd, SSTAT0) & TARGET) != 0) {
/* XXX What happened to the SCB? */
/* Hung target selection. Goto busfree */
printf("%s: Hung target selection\n",
ahd_name(ahd));
ahd_restart(ahd);
ahd_unlock(ahd, &s);
return;
}
if (ahd_search_qinfifo(ahd, target, channel, lun,
SCB_GET_TAG(scb), ROLE_INITIATOR,
/*status*/0, SEARCH_COUNT) > 0) {
disconnected = FALSE;
} else {
disconnected = TRUE;
}
if (disconnected) {
ahd_set_recoveryscb(ahd, scb);
/*
* Actually re-queue this SCB in an attempt
* to select the device before it reconnects.
* In either case (selection or reselection),
* we will now issue a target reset to the
* timed-out device.
*
* Set the MK_MESSAGE control bit indicating
* that we desire to send a message. We
* also set the disconnected flag since
* in the paging case there is no guarantee
* that our SCB control byte matches the
* version on the card. We don't want the
* sequencer to abort the command thinking
* an unsolicited reselection occurred.
*/
scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
scb->flags |= SCB_DEVICE_RESET;
/*
* The sequencer will never re-reference the
* in-core SCB. To make sure we are notified
* during reslection, set the MK_MESSAGE flag
* in the card's copy of the SCB.
*/
ahd_set_scbptr(ahd, SCB_GET_TAG(scb));
ahd_outb(ahd, SCB_CONTROL,
ahd_inb(ahd, SCB_CONTROL)|MK_MESSAGE);
/*
* Clear out any entries in the QINFIFO first
* so we are the next SCB for this target
* to run.
*/
ahd_search_qinfifo(ahd,
SCB_GET_TARGET(ahd, scb),
channel, SCB_GET_LUN(scb),
SCB_LIST_NULL,
ROLE_INITIATOR,
CAM_REQUEUE_REQ,
SEARCH_COMPLETE);
ahd_print_path(ahd, scb);
printf("Queuing a BDR SCB\n");
ahd_qinfifo_requeue_tail(ahd, scb);
ahd_set_scbptr(ahd, saved_scbptr);
scb->io_ctx->ccb_h.timeout_ch =
timeout(ahd_timeout, (caddr_t)scb, 2 * hz);
ahd_unpause(ahd);
} else {
/* Go "immediatly" to the bus reset */
/* This shouldn't happen */
ahd_set_recoveryscb(ahd, scb);
ahd_print_path(ahd, scb);
printf("SCB %d: Immediate reset. "
"Flags = 0x%x\n", SCB_GET_TAG(scb),
scb->flags);
goto bus_reset;
}
}
}
ahd_unlock(ahd, &s);
#endif
}
static void
ahd_abort_ccb(struct ahd_softc *ahd, struct cam_sim *sim, union ccb *ccb)
{
union ccb *abort_ccb;
abort_ccb = ccb->cab.abort_ccb;
switch (abort_ccb->ccb_h.func_code) {
#ifdef AHD_TARGET_MODE
case XPT_ACCEPT_TARGET_IO:
case XPT_IMMED_NOTIFY:
case XPT_CONT_TARGET_IO:
{
struct ahd_tmode_tstate *tstate;
struct ahd_tmode_lstate *lstate;
struct ccb_hdr_slist *list;
cam_status status;
status = ahd_find_tmode_devs(ahd, sim, abort_ccb, &tstate,
&lstate, TRUE);
if (status != CAM_REQ_CMP) {
ccb->ccb_h.status = status;
break;
}
if (abort_ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO)
list = &lstate->accept_tios;
else if (abort_ccb->ccb_h.func_code == XPT_IMMED_NOTIFY)
list = &lstate->immed_notifies;
else
list = NULL;
if (list != NULL) {
struct ccb_hdr *curelm;
int found;
curelm = SLIST_FIRST(list);
found = 0;
if (curelm == &abort_ccb->ccb_h) {
found = 1;
SLIST_REMOVE_HEAD(list, sim_links.sle);
} else {
while(curelm != NULL) {
struct ccb_hdr *nextelm;
nextelm =
SLIST_NEXT(curelm, sim_links.sle);
if (nextelm == &abort_ccb->ccb_h) {
found = 1;
SLIST_NEXT(curelm,
sim_links.sle) =
SLIST_NEXT(nextelm,
sim_links.sle);
break;
}
curelm = nextelm;
}
}
if (found) {
abort_ccb->ccb_h.status = CAM_REQ_ABORTED;
xpt_done(abort_ccb);
ccb->ccb_h.status = CAM_REQ_CMP;
} else {
xpt_print_path(abort_ccb->ccb_h.path);
printf("Not found\n");
ccb->ccb_h.status = CAM_PATH_INVALID;
}
break;
}
/* FALLTHROUGH */
}
#endif
case XPT_SCSI_IO:
/* XXX Fully implement the hard ones */
ccb->ccb_h.status = CAM_UA_ABORT;
break;
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(ccb);
}
void
ahd_send_async(struct ahd_softc *ahd, char channel, u_int target,
u_int lun, ac_code code, void *opt_arg)
{
struct ccb_trans_settings cts;
struct cam_path *path;
void *arg;
int error;
arg = NULL;
error = ahd_create_path(ahd, channel, target, lun, &path);
if (error != CAM_REQ_CMP)
return;
switch (code) {
case AC_TRANSFER_NEG:
{
#ifdef AHD_NEW_TRAN_SETTINGS
struct ccb_trans_settings_scsi *scsi;
cts.type = CTS_TYPE_CURRENT_SETTINGS;
scsi = &cts.proto_specific.scsi;
#else
cts.flags = CCB_TRANS_CURRENT_SETTINGS;
#endif
cts.ccb_h.path = path;
cts.ccb_h.target_id = target;
cts.ccb_h.target_lun = lun;
ahd_get_tran_settings(ahd, ahd->our_id, channel, &cts);
arg = &cts;
#ifdef AHD_NEW_TRAN_SETTINGS
scsi->valid &= ~CTS_SCSI_VALID_TQ;
scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
#else
cts.valid &= ~CCB_TRANS_TQ_VALID;
cts.flags &= ~CCB_TRANS_TAG_ENB;
#endif
if (opt_arg == NULL)
break;
if (*((ahd_queue_alg *)opt_arg) == AHD_QUEUE_TAGGED)
#ifdef AHD_NEW_TRAN_SETTINGS
scsi->flags |= ~CTS_SCSI_FLAGS_TAG_ENB;
scsi->valid |= CTS_SCSI_VALID_TQ;
#else
cts.flags |= CCB_TRANS_TAG_ENB;
cts.valid |= CCB_TRANS_TQ_VALID;
#endif
break;
}
case AC_SENT_BDR:
case AC_BUS_RESET:
break;
default:
panic("ahd_send_async: Unexpected async event");
}
xpt_async(code, path, arg);
xpt_free_path(path);
}
void
ahd_platform_set_tags(struct ahd_softc *ahd,
struct ahd_devinfo *devinfo, int enable)
{
}
int
ahd_platform_alloc(struct ahd_softc *ahd, void *platform_arg)
{
ahd->platform_data = malloc(sizeof(struct ahd_platform_data), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (ahd->platform_data == NULL)
return (ENOMEM);
return (0);
}
void
ahd_platform_free(struct ahd_softc *ahd)
{
struct ahd_platform_data *pdata;
pdata = ahd->platform_data;
if (pdata != NULL) {
if (pdata->regs[0] != NULL)
bus_release_resource(ahd->dev_softc,
pdata->regs_res_type[0],
pdata->regs_res_id[0],
pdata->regs[0]);
if (pdata->regs[1] != NULL)
bus_release_resource(ahd->dev_softc,
pdata->regs_res_type[1],
pdata->regs_res_id[1],
pdata->regs[1]);
if (pdata->irq != NULL)
bus_release_resource(ahd->dev_softc,
pdata->irq_res_type,
0, pdata->irq);
if (pdata->sim_b != NULL) {
xpt_async(AC_LOST_DEVICE, pdata->path_b, NULL);
xpt_free_path(pdata->path_b);
xpt_bus_deregister(cam_sim_path(pdata->sim_b));
cam_sim_free(pdata->sim_b, /*free_devq*/TRUE);
}
if (pdata->sim != NULL) {
xpt_async(AC_LOST_DEVICE, pdata->path, NULL);
xpt_free_path(pdata->path);
xpt_bus_deregister(cam_sim_path(pdata->sim));
cam_sim_free(pdata->sim, /*free_devq*/TRUE);
}
if (pdata->eh != NULL)
EVENTHANDLER_DEREGISTER(shutdown_final, pdata->eh);
free(ahd->platform_data, M_DEVBUF);
}
}
int
ahd_softc_comp(struct ahd_softc *lahd, struct ahd_softc *rahd)
{
/* We don't sort softcs under FreeBSD so report equal always */
return (0);
}
int
ahd_detach(device_t dev)
{
struct ahd_softc *ahd;
u_long l;
u_long s;
ahd_list_lock(&l);
device_printf(dev, "detaching device\n");
ahd = device_get_softc(dev);
ahd = ahd_find_softc(ahd);
if (ahd == NULL) {
device_printf(dev, "aic7xxx already detached\n");
ahd_list_unlock(&l);
return (ENOENT);
}
ahd_lock(ahd, &s);
ahd_intr_enable(ahd, FALSE);
bus_teardown_intr(dev, ahd->platform_data->irq, ahd->platform_data->ih);
ahd_unlock(ahd, &s);
ahd_free(ahd);
ahd_list_unlock(&l);
return (0);
}
#if UNUSED
static void
ahd_dump_targcmd(struct target_cmd *cmd)
{
uint8_t *byte;
uint8_t *last_byte;
int i;
byte = &cmd->initiator_channel;
/* Debugging info for received commands */
last_byte = &cmd[1].initiator_channel;
i = 0;
while (byte < last_byte) {
if (i == 0)
printf("\t");
printf("%#x", *byte++);
i++;
if (i == 8) {
printf("\n");
i = 0;
} else {
printf(", ");
}
}
}
#endif
static int
ahd_modevent(module_t mod, int type, void *data)
{
/* XXX Deal with busy status on unload. */
return 0;
}
static moduledata_t ahd_mod = {
"ahd",
ahd_modevent,
NULL
};
/********************************** DDB Hooks *********************************/
#ifdef DDB
static struct ahd_softc *ahd_ddb_softc;
static int ahd_ddb_paused;
static int ahd_ddb_paused_on_entry;
DB_COMMAND(ahd_set_unit, ahd_ddb_set_unit)
{
struct ahd_softc *list_ahd;
ahd_ddb_softc = NULL;
TAILQ_FOREACH(list_ahd, &ahd_tailq, links) {
if (list_ahd->unit == addr)
ahd_ddb_softc = list_ahd;
}
if (ahd_ddb_softc == NULL)
db_error("No matching softc found!\n");
}
DB_COMMAND(ahd_pause, ahd_ddb_pause)
{
if (ahd_ddb_softc == NULL) {
db_error("Must set unit with ahd_set_unit first!\n");
return;
}
if (ahd_ddb_paused == 0) {
ahd_ddb_paused++;
if (ahd_is_paused(ahd_ddb_softc)) {
ahd_ddb_paused_on_entry++;
return;
}
ahd_pause(ahd_ddb_softc);
}
}
DB_COMMAND(ahd_unpause, ahd_ddb_unpause)
{
if (ahd_ddb_softc == NULL) {
db_error("Must set unit with ahd_set_unit first!\n");
return;
}
if (ahd_ddb_paused != 0) {
ahd_ddb_paused = 0;
if (ahd_ddb_paused_on_entry)
return;
ahd_unpause(ahd_ddb_softc);
} else if (ahd_ddb_paused_on_entry != 0) {
/* Two unpauses to clear a paused on entry. */
ahd_ddb_paused_on_entry = 0;
ahd_unpause(ahd_ddb_softc);
}
}
DB_COMMAND(ahd_in, ahd_ddb_in)
{
int c;
int size;
if (ahd_ddb_softc == NULL) {
db_error("Must set unit with ahd_set_unit first!\n");
return;
}
if (have_addr == 0)
return;
size = 1;
while ((c = *modif++) != '\0') {
switch (c) {
case 'b':
size = 1;
break;
case 'w':
size = 2;
break;
case 'l':
size = 4;
break;
}
}
if (count <= 0)
count = 1;
while (--count >= 0) {
db_printf("%04lx (M)%x: \t", (u_long)addr,
ahd_inb(ahd_ddb_softc, MODE_PTR));
switch (size) {
case 1:
db_printf("%02x\n", ahd_inb(ahd_ddb_softc, addr));
break;
case 2:
db_printf("%04x\n", ahd_inw(ahd_ddb_softc, addr));
break;
case 4:
db_printf("%08x\n", ahd_inl(ahd_ddb_softc, addr));
break;
}
}
}
DB_SET(ahd_out, ahd_ddb_out, db_cmd_set, CS_MORE, NULL)
{
db_expr_t old_value;
db_expr_t new_value;
int size;
if (ahd_ddb_softc == NULL) {
db_error("Must set unit with ahd_set_unit first!\n");
return;
}
switch (modif[0]) {
case '\0':
case 'b':
size = 1;
break;
case 'h':
size = 2;
break;
case 'l':
size = 4;
break;
default:
db_error("Unknown size\n");
return;
}
while (db_expression(&new_value)) {
switch (size) {
default:
case 1:
old_value = ahd_inb(ahd_ddb_softc, addr);
ahd_outb(ahd_ddb_softc, addr, new_value);
break;
case 2:
old_value = ahd_inw(ahd_ddb_softc, addr);
ahd_outw(ahd_ddb_softc, addr, new_value);
break;
case 4:
old_value = ahd_inl(ahd_ddb_softc, addr);
ahd_outl(ahd_ddb_softc, addr, new_value);
break;
}
db_printf("%04lx (M)%x: \t0x%lx\t=\t0x%lx",
(u_long)addr, ahd_inb(ahd_ddb_softc, MODE_PTR),
(u_long)old_value, (u_long)new_value);
addr += size;
}
db_skip_to_eol();
}
#endif
DECLARE_MODULE(ahd, ahd_mod, SI_SUB_DRIVERS, SI_ORDER_MIDDLE);
MODULE_DEPEND(ahd, cam, 1, 1, 1);
MODULE_VERSION(ahd, 1);
Reference in New Issue View Git Blame Copy Permalink