freebsd-nq/sys/gnu/fs/ext2fs/ext2_bmap.c
Bruce Evans 1874ef935c Quick fix for breakage of read clustering on non-IDE drives. Read
clustering is obsolescent technology so hardly anyone noticed.  On
a DORS 32160 SCSI drive with 4 tags, read clustering makes very
little difference even for huge sequential reads.  However, on a
ZIP SCSI drive with 0 tags, the minimum overhead per block is about
40 msec, so very large clusters must be used to get anywhere near
the maximum transfer rate.  Using clusters consisting of 1 8K block
reduces the transfer rate to about 250K/sec.  Under msdosfs, missing
read clustering is normal and a cluster size of 1 512 byte block
reduces the transfer rate to about 25K/sec.

Broken in:	rev.1.18
1998-08-18 03:54:39 +00:00

356 lines
10 KiB
C

/*
* Copyright (c) 1989, 1991, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)ufs_bmap.c 8.7 (Berkeley) 3/21/95
* $Id: ufs_bmap.c,v 1.21 1998/07/04 20:45:39 julian Exp $
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/mount.h>
#include <sys/resourcevar.h>
#include <sys/conf.h>
#include <ufs/ufs/quota.h>
#include <ufs/ufs/inode.h>
#include <ufs/ufs/ufsmount.h>
#include <ufs/ufs/ufs_extern.h>
#include <miscfs/specfs/specdev.h>
/*
* Bmap converts a the logical block number of a file to its physical block
* number on the disk. The conversion is done by using the logical block
* number to index into the array of block pointers described by the dinode.
*/
int
ufs_bmap(ap)
struct vop_bmap_args /* {
struct vnode *a_vp;
ufs_daddr_t a_bn;
struct vnode **a_vpp;
ufs_daddr_t *a_bnp;
int *a_runp;
int *a_runb;
} */ *ap;
{
/*
* Check for underlying vnode requests and ensure that logical
* to physical mapping is requested.
*/
if (ap->a_vpp != NULL)
*ap->a_vpp = VTOI(ap->a_vp)->i_devvp;
if (ap->a_bnp == NULL)
return (0);
return (ufs_bmaparray(ap->a_vp, ap->a_bn, ap->a_bnp, NULL, NULL,
ap->a_runp, ap->a_runb));
}
/*
* Indirect blocks are now on the vnode for the file. They are given negative
* logical block numbers. Indirect blocks are addressed by the negative
* address of the first data block to which they point. Double indirect blocks
* are addressed by one less than the address of the first indirect block to
* which they point. Triple indirect blocks are addressed by one less than
* the address of the first double indirect block to which they point.
*
* ufs_bmaparray does the bmap conversion, and if requested returns the
* array of logical blocks which must be traversed to get to a block.
* Each entry contains the offset into that block that gets you to the
* next block and the disk address of the block (if it is assigned).
*/
int
ufs_bmaparray(vp, bn, bnp, ap, nump, runp, runb)
struct vnode *vp;
ufs_daddr_t bn;
ufs_daddr_t *bnp;
struct indir *ap;
int *nump;
int *runp;
int *runb;
{
register struct inode *ip;
struct buf *bp;
struct ufsmount *ump;
struct mount *mp;
struct vnode *devvp;
struct indir a[NIADDR+1], *xap;
ufs_daddr_t daddr;
long metalbn;
int error, maxrun = 0, num;
ip = VTOI(vp);
mp = vp->v_mount;
ump = VFSTOUFS(mp);
#ifdef DIAGNOSTIC
if (ap != NULL && nump == NULL || ap == NULL && nump != NULL)
panic("ufs_bmaparray: invalid arguments");
#endif
if (runp) {
*runp = 0;
}
if (runb) {
*runb = 0;
}
maxrun = 0;
if (runp || runb || (vp->v_maxio == 0)) {
struct vnode *devvp;
int blksize;
blksize = mp->mnt_stat.f_iosize;
/*
* XXX
* If MAXPHYS is the largest transfer the disks can handle,
* we probably want maxrun to be 1 block less so that we
* don't create a block larger than the device can handle.
*/
devvp = ip->i_devvp;
if (devvp && devvp->v_type == VBLK &&
(devvp->v_rdev != NODEV) &&
(major(devvp->v_rdev) < nblkdev)) {
if (bdevsw[major(devvp->v_rdev)]->d_maxio > MAXPHYS) {
maxrun = MAXPHYS;
vp->v_maxio = MAXPHYS;
} else {
maxrun = bdevsw[major(devvp->v_rdev)]->d_maxio;
vp->v_maxio = bdevsw[major(devvp->v_rdev)]->d_maxio;
}
maxrun = maxrun / blksize;
maxrun -= 1;
}
if (maxrun <= 0) {
vp->v_maxio = DFLTPHYS;
maxrun = DFLTPHYS / blksize;
maxrun -= 1;
}
}
xap = ap == NULL ? a : ap;
if (!nump)
nump = &num;
error = ufs_getlbns(vp, bn, xap, nump);
if (error)
return (error);
num = *nump;
if (num == 0) {
*bnp = blkptrtodb(ump, ip->i_db[bn]);
if (*bnp == 0)
*bnp = -1;
else if (runp) {
daddr_t bnb = bn;
for (++bn; bn < NDADDR && *runp < maxrun &&
is_sequential(ump, ip->i_db[bn - 1], ip->i_db[bn]);
++bn, ++*runp);
bn = bnb;
if (runb && (bn > 0)) {
for (--bn; (bn >= 0) && (*runb < maxrun) &&
is_sequential(ump, ip->i_db[bn],
ip->i_db[bn+1]);
--bn, ++*runb);
}
}
return (0);
}
/* Get disk address out of indirect block array */
daddr = ip->i_ib[xap->in_off];
devvp = VFSTOUFS(vp->v_mount)->um_devvp;
for (bp = NULL, ++xap; --num; ++xap) {
/*
* Exit the loop if there is no disk address assigned yet and
* the indirect block isn't in the cache, or if we were
* looking for an indirect block and we've found it.
*/
metalbn = xap->in_lbn;
if ((daddr == 0 && !incore(vp, metalbn)) || metalbn == bn)
break;
/*
* If we get here, we've either got the block in the cache
* or we have a disk address for it, go fetch it.
*/
if (bp)
bqrelse(bp);
xap->in_exists = 1;
bp = getblk(vp, metalbn, mp->mnt_stat.f_iosize, 0, 0);
if ((bp->b_flags & B_CACHE) == 0) {
#ifdef DIAGNOSTIC
if (!daddr)
panic("ufs_bmaparray: indirect block not in cache");
#endif
bp->b_blkno = blkptrtodb(ump, daddr);
bp->b_flags |= B_READ;
vfs_busy_pages(bp, 0);
VOP_STRATEGY(bp->b_vp, bp);
curproc->p_stats->p_ru.ru_inblock++; /* XXX */
error = biowait(bp);
if (error) {
brelse(bp);
return (error);
}
}
daddr = ((ufs_daddr_t *)bp->b_data)[xap->in_off];
if (num == 1 && daddr && runp) {
for (bn = xap->in_off + 1;
bn < MNINDIR(ump) && *runp < maxrun &&
is_sequential(ump,
((ufs_daddr_t *)bp->b_data)[bn - 1],
((ufs_daddr_t *)bp->b_data)[bn]);
++bn, ++*runp);
bn = xap->in_off;
if (runb && bn) {
for(--bn; bn > 0 && *runb < maxrun &&
is_sequential(ump, ((daddr_t *)bp->b_data)[bn],
((daddr_t *)bp->b_data)[bn+1]);
--bn, ++*runb);
}
}
}
if (bp)
bqrelse(bp);
daddr = blkptrtodb(ump, daddr);
*bnp = daddr == 0 ? -1 : daddr;
return (0);
}
/*
* Create an array of logical block number/offset pairs which represent the
* path of indirect blocks required to access a data block. The first "pair"
* contains the logical block number of the appropriate single, double or
* triple indirect block and the offset into the inode indirect block array.
* Note, the logical block number of the inode single/double/triple indirect
* block appears twice in the array, once with the offset into the i_ib and
* once with the offset into the page itself.
*/
int
ufs_getlbns(vp, bn, ap, nump)
struct vnode *vp;
ufs_daddr_t bn;
struct indir *ap;
int *nump;
{
long blockcnt, metalbn, realbn;
struct ufsmount *ump;
int i, numlevels, off;
int64_t qblockcnt;
ump = VFSTOUFS(vp->v_mount);
if (nump)
*nump = 0;
numlevels = 0;
realbn = bn;
if ((long)bn < 0)
bn = -(long)bn;
/* The first NDADDR blocks are direct blocks. */
if (bn < NDADDR)
return (0);
/*
* Determine the number of levels of indirection. After this loop
* is done, blockcnt indicates the number of data blocks possible
* at the previous level of indirection, and NIADDR - i is the number
* of levels of indirection needed to locate the requested block.
*/
for (blockcnt = 1, i = NIADDR, bn -= NDADDR;; i--, bn -= blockcnt) {
if (i == 0)
return (EFBIG);
/*
* Use int64_t's here to avoid overflow for triple indirect
* blocks when longs have 32 bits and the block size is more
* than 4K.
*/
qblockcnt = (int64_t)blockcnt * MNINDIR(ump);
if (bn < qblockcnt)
break;
blockcnt = qblockcnt;
}
/* Calculate the address of the first meta-block. */
if (realbn >= 0)
metalbn = -(realbn - bn + NIADDR - i);
else
metalbn = -(-realbn - bn + NIADDR - i);
/*
* At each iteration, off is the offset into the bap array which is
* an array of disk addresses at the current level of indirection.
* The logical block number and the offset in that block are stored
* into the argument array.
*/
ap->in_lbn = metalbn;
ap->in_off = off = NIADDR - i;
ap->in_exists = 0;
ap++;
for (++numlevels; i <= NIADDR; i++) {
/* If searching for a meta-data block, quit when found. */
if (metalbn == realbn)
break;
off = (bn / blockcnt) % MNINDIR(ump);
++numlevels;
ap->in_lbn = metalbn;
ap->in_off = off;
ap->in_exists = 0;
++ap;
metalbn -= -1 + off * blockcnt;
blockcnt /= MNINDIR(ump);
}
if (nump)
*nump = numlevels;
return (0);
}