5a583f9c34
kadmind or not; also, only run kadmind on a non-slave server. Man page for rc.conf is also updated. Reviewed by: Mark Murray
145 lines
7.1 KiB
Bash
145 lines
7.1 KiB
Bash
#!/bin/sh
|
|
#
|
|
|
|
# This is rc.conf - a file full of useful variables that you can set
|
|
# to change the default startup behavior of your system.
|
|
#
|
|
# All arguments must be in double or single quotes.
|
|
#
|
|
# $Id: rc.conf,v 1.32 1997/10/31 01:58:53 jdp Exp $
|
|
|
|
##############################################################
|
|
### Important initial Boot-time options #####################
|
|
##############################################################
|
|
|
|
swapfile="NO" # Set to name of swapfile if aux swapfile desired.
|
|
apm_enable="NO" # Set to YES if you want APM enabled.
|
|
pccard_enable="NO" # Set to YES if you want to configure PCCARD devices.
|
|
pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address.
|
|
pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO).
|
|
local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs.
|
|
local_periodic="/usr/local/etc/periodic /usr/X11R6/etc/periodic" # periodic script dirs
|
|
|
|
|
|
##############################################################
|
|
### Network configuration sub-section ######################
|
|
##############################################################
|
|
|
|
### Basic network options: ###
|
|
hostname="myname.my.domain" # Set this!
|
|
nisdomainname="NO" # Set to NIS domain if using NIS (or NO).
|
|
firewall_enable="NO" # Set to YES to enable firewall functionality
|
|
firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall)
|
|
firewall_quiet="NO" # Set to YES to suppress rule display
|
|
tcp_extensions="YES" # Allow RFC1323 & RFC1644 extensions (or NO).
|
|
network_interfaces="lo0" # List of network interfaces (lo0 is loopback).
|
|
ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration.
|
|
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
|
|
|
|
### Network daemon (miscellaneous) & NFS options: ###
|
|
syslogd_enable="YES" # Run syslog daemon (or NO).
|
|
syslogd_flags="" # Flags to syslogd (if enabled).
|
|
inetd_enable="YES" # Run the network daemon displatcher (or NO).
|
|
inetd_flags="" # Optional flags to inetd.
|
|
named_enable="NO" # Run named, the DNS server (or NO).
|
|
named_flags="-b /etc/namedb/named.boot" # Flags to named (if enabled).
|
|
kerberos_server_enable="NO" # Run a kerberos master server (or NO).
|
|
kadmind_server_enable="NO" # Run kadmind (or NO) -- do not run on
|
|
# a slave kerberos server
|
|
kerberos_stash="" # Is the kerberos master key stashed?
|
|
rwhod_enable="NO" # Run the rwho daemon (or NO).
|
|
amd_enable="NO" # Run amd service with $amd_flags (or NO).
|
|
amd_flags="-a /net -c 1800 -k i386 -d my.domain -l syslog /host /etc/amd.map"
|
|
nfs_client_enable="NO" # This host is an NFS client (or NO).
|
|
nfs_client_flags="-n 4" # Flags to nfsiod (if enabled).
|
|
nfs_server_enable="NO" # This host is an NFS server (or NO).
|
|
nfs_server_flags="-u -t 4" # Flags to nfsd (if enabled).
|
|
mountd_flags="-r" # Flags to mountd (if NFS server enabled).
|
|
nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO).
|
|
rpc_lockd_enable="NO" # Run NFS rpc.lockd (*broken!*) if nfs_server.
|
|
rpc_statd_enable="YES" # Run NFS rpc.statd if nfs_server (or NO).
|
|
portmap_enable="YES" # Run the portmapper service (or NO).
|
|
portmap_flags="" # Flags to portmap (if enabled).
|
|
xtend_enable="NO" # Run the X-10 power controller daemon.
|
|
xtend_flags="" # Flags to xtend (if enabled).
|
|
|
|
### Network Time Services options: ###
|
|
timed_enable="NO" # Run the time daemon (or NO).
|
|
timed_flags="" # Flags to timed (if enabled).
|
|
ntpdate_enable="NO" # Run the ntpdate to sync time (or NO).
|
|
ntpdate_flags="" # Flags to ntpdate (if enabled).
|
|
xntpd_enable="NO" # Run xntpd Network Time Protocol (or NO).
|
|
xntpd_flags="" # Flags to xntpd (if enabled).
|
|
tickadj_enable="NO" # Run tickadj (or NO).
|
|
tickadj_flags="-Aq" # Flags to tickadj (if enabled).
|
|
|
|
# Network Information Services (NIS) options: ###
|
|
nis_client_enable="NO" # We're an NIS client (or NO).
|
|
nis_client_flags="" # Flags to ypbind (if enabled).
|
|
nis_ypset_enable="NO" # Run ypset at boot time (or NO).
|
|
nis_ypset_flags="" # Flags to ypset (if enabled).
|
|
nis_server_enable="NO" # We're an NIS server (or NO).
|
|
nis_server_flags="" # Flags to ypserv (if enabled).
|
|
nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO).
|
|
nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled).
|
|
nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO).
|
|
nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled).
|
|
|
|
### Network routing options: ###
|
|
defaultrouter="NO" # Set to default gateway (or NO).
|
|
static_routes="" # Set to static route list (or leave empty).
|
|
gateway_enable="NO" # Set to YES if this host will be a gateway.
|
|
router_enable="YES" # Set to YES to enable a routing daemon.
|
|
router="routed" # Name of routing daemon to use if enabled.
|
|
router_flags="-q" # Flags for routing daemon.
|
|
mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf).
|
|
mrouted_flags="" # Flags for multicast routing daemon.
|
|
ipxgateway_enable="NO" # Set to YES to enable IPX routing.
|
|
ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon.
|
|
ipxrouted_flags="" # Flags for IPX routing daemon.
|
|
arpproxy_all="" # replaces obsolete kernel option ARP_PROXYALL.
|
|
|
|
|
|
##############################################################
|
|
### System console options #################################
|
|
##############################################################
|
|
|
|
keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO).
|
|
keyrate="NO" # keyboard rate to: slow, normal, fast (or NO).
|
|
keybell="NO" # bell to duration.pitch or normal or visual (or NO).
|
|
keychange="NO" # function keys default values (or NO).
|
|
cursor="NO" # cursor type {normal|blink|destructive} (or NO).
|
|
scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO).
|
|
font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO).
|
|
font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO).
|
|
font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO).
|
|
blanktime="NO" # blank time (in seconds) or "NO" to turn it off.
|
|
saver="NO" # screen saver: blank/daemon/green/snake/star/NO.
|
|
moused_type="NO" # See man page for rc.conf(5) for available settings.
|
|
moused_port="/dev/cuaa0" # Set to your mouse port (required if mousetype set).
|
|
moused_flags="" # Any additional flags to moused.
|
|
|
|
|
|
##############################################################
|
|
### Miscellaneous administrative options ###################
|
|
##############################################################
|
|
|
|
cron_enable="YES" # Run the periodic job daemon.
|
|
lpd_enable="NO" # Run the line printer daemon.
|
|
lpd_flags="" # Flags to lpd (if enabled).
|
|
sendmail_enable="YES" # Run the sendmail daemon (or NO).
|
|
sendmail_flags="-bd -q30m" # -bd is pretty mandatory.
|
|
dumpdev="NO" # Device name to crashdump to (if enabled).
|
|
check_quotas="NO" # Check quotas (or NO).
|
|
accounting_enable="NO" # Turn on process accounting (or NO).
|
|
ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO).
|
|
linux_enable="NO" # Linux emulation loaded at startup (or NO).
|
|
rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO).
|
|
|
|
##############################################################
|
|
### Allow local configuration override at the very end here ##
|
|
##############################################################
|
|
if [ -f /etc/rc.conf.local ]; then
|
|
. /etc/rc.conf.local
|
|
fi
|