freebsd-nq/usr.sbin/i2c/i2c.c

911 lines
20 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (C) 2008-2009 Semihalf, Michal Hajduk and Bartlomiej Sieka
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <assert.h>
#include <ctype.h>
#include <err.h>
#include <errno.h>
#include <sysexits.h>
#include <fcntl.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <sys/endian.h>
#include <sys/ioctl.h>
#include <dev/iicbus/iic.h>
#define I2C_DEV "/dev/iic0"
#define I2C_MODE_NOTSET 0
#define I2C_MODE_NONE 1
#define I2C_MODE_STOP_START 2
#define I2C_MODE_REPEATED_START 3
#define I2C_MODE_TRANSFER 4
struct options {
const char *width;
unsigned count;
int verbose;
int binary;
const char *skip;
int mode;
char dir;
uint32_t addr;
uint32_t off;
uint8_t off_buf[2];
size_t off_len;
};
#define N_FDCACHE 128
static int fd_cache[N_FDCACHE];
__dead2 static void
usage(const char *msg)
{
if (msg != NULL)
fprintf(stderr, "%s\n", msg);
fprintf(stderr, "usage: %s -a addr [-f device] [-d [r|w]] [-o offset] "
"[-w [0|8|16|16LE|16BE]] [-c count] [-m [tr|ss|rs|no]] [-b] [-v]\n",
getprogname());
fprintf(stderr, " %s -s [-f device] [-n skip_addr] -v\n",
getprogname());
fprintf(stderr, " %s -r [-f device] -v\n", getprogname());
exit(EX_USAGE);
}
static int
i2c_do_stop(int fd)
{
int i;
i = ioctl(fd, I2CSTOP);
if (i < 0)
fprintf(stderr, "ioctl: error sending stop condition: %s\n",
strerror(errno));
return (i);
}
static int
i2c_do_start(int fd, struct iiccmd *cmd)
{
int i;
i = ioctl(fd, I2CSTART, cmd);
if (i < 0)
fprintf(stderr, "ioctl: error sending start condition: %s\n",
strerror(errno));
return (i);
}
static int
i2c_do_repeatstart(int fd, struct iiccmd *cmd)
{
int i;
i = ioctl(fd, I2CRPTSTART, cmd);
if (i < 0)
fprintf(stderr, "ioctl: error sending repeated start: %s\n",
strerror(errno));
return (i);
}
static int
i2c_do_write(int fd, struct iiccmd *cmd)
{
int i;
i = ioctl(fd, I2CWRITE, cmd);
if (i < 0)
fprintf(stderr, "ioctl: error writing: %s\n",
strerror(errno));
return (i);
}
static int
i2c_do_read(int fd, struct iiccmd *cmd)
{
int i;
i = ioctl(fd, I2CREAD, cmd);
if (i < 0)
fprintf(stderr, "ioctl: error reading: %s\n",
strerror(errno));
return (i);
}
static int
i2c_do_reset(int fd)
{
struct iiccmd cmd;
int i;
memset(&cmd, 0, sizeof cmd);
i = ioctl(fd, I2CRSTCARD, &cmd);
if (i < 0)
fprintf(stderr, "ioctl: error resetting controller: %s\n",
strerror(errno));
return (i);
}
static void
parse_skip(const char *skip, char blacklist[128])
{
const char *p;
unsigned x, y;
for (p = skip; *p != '\0';) {
if (*p == '0' && p[1] == 'x')
p += 2;
if (!isxdigit(*p))
usage("Bad -n argument, expected (first) hex-digit");
x = digittoint(*p++) << 4;
if (!isxdigit(*p))
usage("Bad -n argument, expected (second) hex-digit");
x |= digittoint(*p++);
if (x == 0 || x > 0x7f)
usage("Bad -n argument, (01..7f)");
if (*p == ':' || *p == ',' || *p == '\0') {
blacklist[x] = 1;
if (*p != '\0')
p++;
continue;
}
if (*p == '-') {
p++;
} else if (*p == '.' && p[1] == '.') {
p += 2;
} else {
usage("Bad -n argument, ([:|,|..|-])");
}
if (*p == '0' && p[1] == 'x')
p += 2;
if (!isxdigit(*p))
usage("Bad -n argument, expected (first) hex-digit");
y = digittoint(*p++) << 4;
if (!isxdigit(*p))
usage("Bad -n argument, expected (second) hex-digit");
y |= digittoint(*p++);
if (y == 0 || y > 0x7f)
usage("Bad -n argument, (01..7f)");
if (y < x)
usage("Bad -n argument, (end < start)");
for (;x <= y; x++)
blacklist[x] = 1;
if (*p == ':' || *p == ',')
p++;
}
}
static int
scan_bus(const char *dev, int fd, const char *skip, int verbose)
{
struct iiccmd cmd;
struct iic_msg rdmsg;
struct iic_rdwr_data rdwrdata;
int error;
unsigned u;
int num_found = 0, use_read_xfer;
uint8_t rdbyte;
char blacklist[128];
const char *sep = "";
memset(blacklist, 0, sizeof blacklist);
if (skip != NULL)
parse_skip(skip, blacklist);
for (use_read_xfer = 0; use_read_xfer < 2; use_read_xfer++) {
for (u = 1; u < 127; u++) {
if (blacklist[u])
continue;
cmd.slave = u << 1;
cmd.last = 1;
cmd.count = 0;
if (i2c_do_reset(fd))
return (EX_NOINPUT);
if (use_read_xfer) {
rdmsg.buf = &rdbyte;
rdmsg.len = 1;
rdmsg.flags = IIC_M_RD;
rdmsg.slave = u << 1;
rdwrdata.msgs = &rdmsg;
rdwrdata.nmsgs = 1;
error = ioctl(fd, I2CRDWR, &rdwrdata);
} else {
error = ioctl(fd, I2CSTART, &cmd);
if (errno == ENODEV || errno == EOPNOTSUPP)
break; /* Try reads instead */
(void)ioctl(fd, I2CSTOP);
}
if (error == 0) {
if (!num_found++ && verbose) {
fprintf(stderr,
"Scanning I2C devices on %s:\n",
dev);
}
printf("%s%02x", sep, u);
sep = " ";
}
}
if (num_found > 0)
break;
if (verbose && !use_read_xfer)
fprintf(stderr,
"Hardware may not support START/STOP scanning; "
"trying less-reliable read method.\n");
}
if (num_found == 0 && verbose)
printf("<Nothing Found>");
printf("\n");
return (i2c_do_reset(fd));
}
static int
reset_bus(const char *dev, int fd, int verbose)
{
if (verbose)
fprintf(stderr, "Resetting I2C controller on %s\n", dev);
return (i2c_do_reset(fd));
}
static const char *
encode_offset(const char *width, unsigned offset, uint8_t *dst, size_t *len)
{
if (!strcmp(width, "0")) {
*len = 0;
return (NULL);
}
if (!strcmp(width, "8")) {
if (offset > 0xff)
return ("Invalid 8-bit offset\n");
*dst = offset;
*len = 1;
return (NULL);
}
if (offset > 0xffff)
return ("Invalid 16-bit offset\n");
if (!strcmp(width, "16LE") || !strcmp(width, "16")) {
le16enc(dst, offset);
*len = 2;
return (NULL);
}
if (!strcmp(width, "16BE")) {
be16enc(dst, offset);
*len = 2;
return (NULL);
}
return ("Invalid offset width, must be: 0|8|16|16LE|16BE\n");
}
static int
write_offset(int fd, struct options i2c_opt, struct iiccmd *cmd)
{
if (i2c_opt.off_len > 0) {
cmd->count = i2c_opt.off_len;
cmd->buf = (void*)i2c_opt.off_buf;
return (i2c_do_write(fd, cmd));
}
return (0);
}
static int
i2c_write(int fd, struct options i2c_opt, uint8_t *i2c_buf)
{
struct iiccmd cmd;
char buf[i2c_opt.off_len + i2c_opt.count];
memset(&cmd, 0, sizeof(cmd));
cmd.slave = i2c_opt.addr;
if (i2c_do_start(fd, &cmd))
return (i2c_do_stop(fd) | 1);
switch(i2c_opt.mode) {
case I2C_MODE_STOP_START:
if (write_offset(fd, i2c_opt, &cmd))
return (i2c_do_stop(fd) | 1);
if (i2c_do_stop(fd))
return (1);
if (i2c_do_start(fd, &cmd))
return (i2c_do_stop(fd) | 1);
/*
* Write the data
*/
cmd.count = i2c_opt.count;
cmd.buf = (void*)i2c_buf;
cmd.last = 0;
if (i2c_do_write(fd, &cmd))
return (i2c_do_stop(fd) | 1);
break;
case I2C_MODE_REPEATED_START:
if (write_offset(fd, i2c_opt, &cmd))
return (i2c_do_stop(fd) | 1);
if (i2c_do_repeatstart(fd, &cmd))
return (i2c_do_stop(fd) | 1);
/*
* Write the data
*/
cmd.count = i2c_opt.count;
cmd.buf = (void*)i2c_buf;
cmd.last = 0;
if (i2c_do_write(fd, &cmd))
return (i2c_do_stop(fd) | 1);
break;
case I2C_MODE_NONE: /* fall through */
default:
memcpy(buf, i2c_opt.off_buf, i2c_opt.off_len);
memcpy(buf + i2c_opt.off_len, i2c_buf, i2c_opt.count);
/*
* Write offset and data
*/
cmd.count = i2c_opt.off_len + i2c_opt.count;
cmd.buf = (void*)buf;
cmd.last = 0;
if (i2c_do_write(fd, &cmd))
return (i2c_do_stop(fd) | 1);
break;
}
return (i2c_do_stop(fd));
}
static int
i2c_read(int fd, struct options i2c_opt, uint8_t *i2c_buf)
{
struct iiccmd cmd;
char data = 0;
memset(&cmd, 0, sizeof(cmd));
cmd.slave = i2c_opt.addr;
if (i2c_opt.off_len) {
cmd.count = 1;
cmd.last = 0;
cmd.buf = &data;
if (i2c_do_start(fd, &cmd))
return (i2c_do_stop(fd) | 1);
if (write_offset(fd, i2c_opt, &cmd))
return (i2c_do_stop(fd) | 1);
if (i2c_opt.mode == I2C_MODE_STOP_START && i2c_do_stop(fd))
return (1);
}
cmd.slave = i2c_opt.addr | 1;
cmd.count = 1;
cmd.last = 0;
cmd.buf = &data;
if (i2c_opt.mode == I2C_MODE_STOP_START || i2c_opt.off_len == 0) {
if (i2c_do_start(fd, &cmd))
return (i2c_do_stop(fd) | 1);
} else if (i2c_opt.mode == I2C_MODE_REPEATED_START) {
if (i2c_do_repeatstart(fd, &cmd))
return (i2c_do_stop(fd) | 1);
}
cmd.count = i2c_opt.count;
cmd.buf = (void*)i2c_buf;
cmd.last = 1;
if (i2c_do_read(fd, &cmd))
return (i2c_do_stop(fd) | 1);
return (i2c_do_stop(fd));
}
/*
* i2c_rdwr_transfer() - use I2CRDWR to conduct a complete i2c transfer.
*
* Some i2c hardware is unable to provide direct control over START, REPEAT-
* START, and STOP operations. Such hardware can only perform a complete
* START-<data>-STOP or START-<data>-REPEAT-START-<data>-STOP sequence as a
* single operation. The driver framework refers to this sequence as a
* "transfer" so we call it "transfer mode". We assemble either one or two
* iic_msg structures to describe the IO operations, and hand them off to the
* driver to be handled as a single transfer.
*/
static int
i2c_rdwr_transfer(int fd, struct options i2c_opt, uint8_t *i2c_buf)
{
struct iic_msg msgs[2], *msgp = msgs;
struct iic_rdwr_data xfer;
int flag = 0;
if (i2c_opt.off_len) {
msgp->flags = IIC_M_WR | IIC_M_NOSTOP;
msgp->slave = i2c_opt.addr;
msgp->buf = i2c_opt.off_buf;
msgp->len = i2c_opt.off_len;
msgp++;
flag = IIC_M_NOSTART;
}
/*
* If the transfer direction is write and we did a write of the offset
* above, then we need to elide the start; this transfer is just more
* writing that follows the one started above. For a read, we always do
* a start; if we did an offset write above it'll be a repeat-start
* because of the NOSTOP flag used above.
*/
if (i2c_opt.dir == 'w')
msgp->flags = IIC_M_WR | flag;
else
msgp->flags = IIC_M_RD;
msgp->slave = i2c_opt.addr;
msgp->len = i2c_opt.count;
msgp->buf = i2c_buf;
msgp++;
xfer.msgs = msgs;
xfer.nmsgs = msgp - msgs;
if (ioctl(fd, I2CRDWR, &xfer) == -1 )
err(1, "ioctl(I2CRDWR) failed");
return (0);
}
static int
access_bus(int fd, struct options i2c_opt)
{
uint8_t i2c_buf[i2c_opt.count];
int error;
unsigned u, chunk_size = 16;
/*
* For a write, read the data to be written to the chip from stdin.
*/
if (i2c_opt.dir == 'w') {
if (i2c_opt.verbose && !i2c_opt.binary)
fprintf(stderr, "Enter %u bytes of data: ",
i2c_opt.count);
if (fread(i2c_buf, 1, i2c_opt.count, stdin) != i2c_opt.count)
err(1, "not enough data, exiting\n");
}
if (i2c_opt.mode == I2C_MODE_TRANSFER)
error = i2c_rdwr_transfer(fd, i2c_opt, i2c_buf);
else if (i2c_opt.dir == 'w')
error = i2c_write(fd, i2c_opt, i2c_buf);
else
error = i2c_read(fd, i2c_opt, i2c_buf);
if (error == 0) {
if (i2c_opt.dir == 'r' && i2c_opt.binary) {
(void)fwrite(i2c_buf, 1, i2c_opt.count, stdout);
} else if (i2c_opt.verbose || i2c_opt.dir == 'r') {
if (i2c_opt.verbose)
fprintf(stderr, "\nData %s (hex):\n",
i2c_opt.dir == 'r' ? "read" : "written");
for (u = 0; u < i2c_opt.count; u++) {
printf("%02hhx ", i2c_buf[u]);
if ((u % chunk_size) == chunk_size - 1)
printf("\n");
}
if ((u % chunk_size) != 0)
printf("\n");
}
}
return (error);
}
static const char *widths[] = {
"0",
"8",
"16LE",
"16BE",
"16",
NULL,
};
static int
command_bus(struct options i2c_opt, char *cmd)
{
int error, fd;
char devbuf[64];
uint8_t dbuf[BUFSIZ];
unsigned bus;
const char *width = NULL;
const char *err_msg;
unsigned offset;
unsigned u;
size_t length;
while (isspace(*cmd))
cmd++;
switch(*cmd) {
case 0:
case '#':
return (0);
case 'p':
case 'P':
printf("%s", cmd);
return (0);
case 'r':
case 'R':
i2c_opt.dir = 'r';
break;
case 'w':
case 'W':
i2c_opt.dir = 'w';
break;
default:
fprintf(stderr,
"Did not understand command: 0x%02x ", *cmd);
if (isgraph(*cmd))
fprintf(stderr, "'%c'", *cmd);
fprintf(stderr, "\n");
return(-1);
}
cmd++;
bus = strtoul(cmd, &cmd, 0);
if (bus == 0 && errno == EINVAL) {
fprintf(stderr, "Could not translate bus number\n");
return(-1);
}
i2c_opt.addr = strtoul(cmd, &cmd, 0);
if (i2c_opt.addr == 0 && errno == EINVAL) {
fprintf(stderr, "Could not translate device\n");
return(-1);
}
if (i2c_opt.addr < 1 || i2c_opt.addr > 0x7f) {
fprintf(stderr, "Invalid device (0x%x)\n", i2c_opt.addr);
return(-1);
}
i2c_opt.addr <<= 1;
while(isspace(*cmd))
cmd++;
for(u = 0; widths[u]; u++) {
length = strlen(widths[u]);
if (memcmp(cmd, widths[u], length))
continue;
if (!isspace(cmd[length]))
continue;
width = widths[u];
cmd += length;
break;
}
if (width == NULL) {
fprintf(stderr, "Invalid width\n");
return(-1);
}
offset = strtoul(cmd, &cmd, 0);
if (offset == 0 && errno == EINVAL) {
fprintf(stderr, "Could not translate offset\n");
return(-1);
}
err_msg = encode_offset(width, offset,
i2c_opt.off_buf, &i2c_opt.off_len);
if (err_msg) {
fprintf(stderr, "%s", err_msg);
return(-1);
}
if (i2c_opt.dir == 'r') {
i2c_opt.count = strtoul(cmd, &cmd, 0);
if (i2c_opt.count == 0 && errno == EINVAL) {
fprintf(stderr, "Could not translate length\n");
return(-1);
}
} else {
i2c_opt.count = 0;
while (1) {
while(isspace(*cmd))
cmd++;
if (!*cmd)
break;
if (!isxdigit(*cmd)) {
fprintf(stderr, "Not a hex digit.\n");
return(-1);
}
dbuf[i2c_opt.count] = digittoint(*cmd++) << 4;
while(isspace(*cmd))
cmd++;
if (!*cmd) {
fprintf(stderr,
"Uneven number of hex digits.\n");
return(-1);
}
if (!isxdigit(*cmd)) {
fprintf(stderr, "Not a hex digit.\n");
return(-1);
}
dbuf[i2c_opt.count++] |= digittoint(*cmd++);
}
}
assert(bus < N_FDCACHE);
fd = fd_cache[bus];
if (fd < 0) {
(void)sprintf(devbuf, "/dev/iic%u", bus);
fd = open(devbuf, O_RDWR);
if (fd == -1) {
fprintf(stderr, "Error opening I2C controller (%s): %s\n",
devbuf, strerror(errno));
return (EX_NOINPUT);
}
fd_cache[bus] = fd;
}
error = i2c_rdwr_transfer(fd, i2c_opt, dbuf);
if (error)
return(-1);
if (i2c_opt.dir == 'r') {
for (u = 0; u < i2c_opt.count; u++)
printf("%02x", dbuf[u]);
printf("\n");
}
return (0);
}
static int
exec_bus(struct options i2c_opt, char *cmd)
{
int error;
while (isspace(*cmd))
cmd++;
if (*cmd == '#' || *cmd == '\0')
return (0);
error = command_bus(i2c_opt, cmd);
if (i2c_opt.verbose) {
(void)fflush(stderr);
printf(error ? "ERROR\n" : "OK\n");
error = 0;
} else if (error) {
fprintf(stderr, " in: %s", cmd);
}
(void)fflush(stdout);
return (error);
}
static int
instruct_bus(struct options i2c_opt, int argc, char **argv)
{
char buf[BUFSIZ];
int rd_cmds = (argc == 0);
int error;
while (argc-- > 0) {
if (argc == 0 && !strcmp(*argv, "-")) {
rd_cmds = 1;
} else {
error = exec_bus(i2c_opt, *argv);
if (error)
return (error);
}
argv++;
}
if (!rd_cmds)
return (0);
while (fgets(buf, sizeof buf, stdin) != NULL) {
error = exec_bus(i2c_opt, buf);
if (error)
return (error);
}
return (0);
}
int
main(int argc, char** argv)
{
struct options i2c_opt;
const char *dev, *err_msg;
int fd, error = 0, ch;
const char *optflags = "a:f:d:o:w:c:m:n:sbvrh";
char do_what = 0;
dev = I2C_DEV;
for (ch = 0; ch < N_FDCACHE; ch++)
fd_cache[ch] = -1;
/* Default values */
i2c_opt.off = 0;
i2c_opt.verbose = 0;
i2c_opt.dir = 'r'; /* direction = read */
i2c_opt.width = "8";
i2c_opt.count = 1;
i2c_opt.binary = 0; /* ASCII text output */
i2c_opt.skip = NULL; /* scan all addresses */
i2c_opt.mode = I2C_MODE_TRANSFER;
/* Find out what we are going to do */
while ((ch = getopt(argc, argv, "a:f:d:iw:c:m:n:sbvrh")) != -1) {
switch(ch) {
case 'a':
case 'i':
case 'r':
case 's':
if (do_what)
usage("Only one of [-a|-h|-r|-s]");
do_what = ch;
break;
case 'h':
usage("Help:");
break;
default:
break;
}
}
/* Then handle the legal subset of arguments */
switch (do_what) {
case 0: usage("Pick one of [-a|-h|-i|-r|-s]"); break;
case 'a': optflags = "a:f:d:w:o:c:m:bv"; break;
case 'i': optflags = "iv"; break;
case 'r': optflags = "rf:v"; break;
case 's': optflags = "sf:n:v"; break;
default: assert("Bad do_what");
}
optreset = 1;
optind = 1;
while ((ch = getopt(argc, argv, optflags)) != -1) {
switch(ch) {
case 'a':
i2c_opt.addr = strtoul(optarg, 0, 16);
if (i2c_opt.addr == 0 && errno == EINVAL)
usage("Bad -a argument (hex)");
if (i2c_opt.addr == 0 || i2c_opt.addr > 0x7f)
usage("Bad -a argument (01..7f)");
i2c_opt.addr <<= 1;
break;
case 'b':
i2c_opt.binary = 1;
break;
case 'c':
i2c_opt.count = (strtoul(optarg, 0, 10));
if (i2c_opt.count == 0 && errno == EINVAL)
usage("Bad -c argument (decimal)");
break;
case 'd':
if (strcmp(optarg, "r") && strcmp(optarg, "w"))
usage("Bad -d argument ([r|w])");
i2c_opt.dir = optarg[0];
break;
case 'f':
dev = optarg;
break;
case 'i': break;
case 'm':
if (!strcmp(optarg, "no"))
i2c_opt.mode = I2C_MODE_NONE;
else if (!strcmp(optarg, "ss"))
i2c_opt.mode = I2C_MODE_STOP_START;
else if (!strcmp(optarg, "rs"))
i2c_opt.mode = I2C_MODE_REPEATED_START;
else if (!strcmp(optarg, "tr"))
i2c_opt.mode = I2C_MODE_TRANSFER;
else
usage("Bad -m argument ([no|ss|rs|tr])");
break;
case 'n':
i2c_opt.skip = optarg;
break;
case 'o':
i2c_opt.off = strtoul(optarg, 0, 16);
if (i2c_opt.off == 0 && errno == EINVAL)
usage("Bad -o argument (hex)");
break;
case 'r': break;
case 's': break;
case 'v':
i2c_opt.verbose = 1;
break;
case 'w':
i2c_opt.width = optarg; // checked later.
break;
default:
fprintf(stderr, "Illegal -%c option", ch);
usage(NULL);
}
}
argc -= optind;
argv += optind;
if (do_what == 'i')
return(instruct_bus(i2c_opt, argc, argv));
if (argc > 0)
usage("Too many arguments");
/* Set default mode if option -m is not specified */
if (i2c_opt.mode == I2C_MODE_NOTSET) {
if (i2c_opt.dir == 'r')
i2c_opt.mode = I2C_MODE_STOP_START;
else if (i2c_opt.dir == 'w')
i2c_opt.mode = I2C_MODE_NONE;
}
err_msg = encode_offset(i2c_opt.width, i2c_opt.off,
i2c_opt.off_buf, &i2c_opt.off_len);
if (err_msg != NULL) {
fprintf(stderr, "%s", err_msg);
return(EX_USAGE);
}
if (i2c_opt.verbose)
fprintf(stderr, "dev: %s, addr: 0x%x, r/w: %c, "
"offset: 0x%02x, width: %s, count: %u\n", dev,
i2c_opt.addr >> 1, i2c_opt.dir, i2c_opt.off,
i2c_opt.width, i2c_opt.count);
fd = open(dev, O_RDWR);
if (fd == -1) {
fprintf(stderr, "Error opening I2C controller (%s): %s\n",
dev, strerror(errno));
return (EX_NOINPUT);
}
switch (do_what) {
case 'a':
error = access_bus(fd, i2c_opt);
break;
case 's':
error = scan_bus(dev, fd, i2c_opt.skip, i2c_opt.verbose);
break;
case 'r':
error = reset_bus(dev, fd, i2c_opt.verbose);
break;
default:
assert("Bad do_what");
}
ch = close(fd);
assert(ch == 0);
return (error);
}