freebsd-nq/sys/dev/ath/ath_hal
Adrian Chadd f857fb4fa3 Also set the AR5212 HAL power mode tracking in the right spot.
Tested:

* D-Link DWL-G650 NIC (AR2413), STA mode
2014-03-22 03:36:07 +00:00
..
ah_regdomain PicoStation M2HP presents reg domain 0x2a which is not found in atheros or linux 2014-02-23 18:07:17 +00:00
ar5210 Migrate the chip power mode status to public ath_hal, rather than the 2014-03-10 06:03:35 +00:00
ar5211 Migrate the chip power mode status to public ath_hal, rather than the 2014-03-10 06:03:35 +00:00
ar5212 Also set the AR5212 HAL power mode tracking in the right spot. 2014-03-22 03:36:07 +00:00
ar5312 Migrate the chip power mode status to public ath_hal, rather than the 2014-03-10 06:03:35 +00:00
ar5416 Shuffle ah_powerMode to be in a sane spot for the given power operation. 2014-03-20 05:08:31 +00:00
ar9001 Use the TPC bank by default for AR9160. 2013-04-17 07:22:23 +00:00
ar9002 Set the antenna "config group" field. 2013-06-12 15:18:10 +00:00
ar9003 Add device identification and probe/attach support for the QCA9565. 2013-05-02 00:59:39 +00:00
ah_debug.h HAL additions to enable MCI Bluetooth coexistence in the AR9300 HAL. 2013-04-05 07:41:47 +00:00
ah_decode.h
ah_desc.h Document the AR9285/AR9485 LNA configuration information that's 2013-06-05 00:39:20 +00:00
ah_devid.h Add device identification and probe/attach support for the QCA9565. 2013-05-02 00:59:39 +00:00
ah_diagcodes.h Add some more diagnostic codes. 2012-08-24 00:17:39 +00:00
ah_eeprom_9287.c Move this magic check to only occur if no eeprom data is given. 2012-08-26 04:26:49 +00:00
ah_eeprom_9287.h
ah_eeprom_v1.c
ah_eeprom_v1.h
ah_eeprom_v3.c
ah_eeprom_v3.h
ah_eeprom_v4k.c "Upgrade" the AR9285 code to support PCI/ART EEPROM on flash. 2012-04-20 21:56:13 +00:00
ah_eeprom_v4k.h
ah_eeprom_v14.c
ah_eeprom_v14.h
ah_eeprom.h Bring over some new EEPROM regulatory domain flags. 2012-08-24 01:14:00 +00:00
ah_internal.h Add a HAL local routine to map the 2GHz channel frequency to an IEEE 2013-06-26 04:46:03 +00:00
ah_regdomain.c PicoStation M2HP presents reg domain 0x2a which is not found in atheros or linux 2014-02-23 18:07:17 +00:00
ah_regdomain.h
ah_soc.h
ah.c Add a HAL local routine to map the 2GHz channel frequency to an IEEE 2013-06-26 04:46:03 +00:00
ah.h Migrate the chip power mode status to public ath_hal, rather than the 2014-03-10 06:03:35 +00:00