freebsd-nq/sys/dev/oce/oce_hw.c
Pedro F. Giffuni 7282444b10 sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.
2017-11-20 19:36:21 +00:00

598 lines
14 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (C) 2013 Emulex
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* 3. Neither the name of the Emulex Corporation nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* Contact Information:
* freebsd-drivers@emulex.com
*
* Emulex
* 3333 Susan Street
* Costa Mesa, CA 92626
*/
/* $FreeBSD$ */
#include "oce_if.h"
static int oce_POST(POCE_SOFTC sc);
/**
* @brief Function to post status
* @param sc software handle to the device
*/
static int
oce_POST(POCE_SOFTC sc)
{
mpu_ep_semaphore_t post_status;
int tmo = 60000;
/* read semaphore CSR */
post_status.dw0 = OCE_READ_CSR_MPU(sc, csr, MPU_EP_SEMAPHORE(sc));
/* if host is ready then wait for fw ready else send POST */
if (post_status.bits.stage <= POST_STAGE_AWAITING_HOST_RDY) {
post_status.bits.stage = POST_STAGE_CHIP_RESET;
OCE_WRITE_CSR_MPU(sc, csr, MPU_EP_SEMAPHORE(sc), post_status.dw0);
}
/* wait for FW ready */
for (;;) {
if (--tmo == 0)
break;
DELAY(1000);
post_status.dw0 = OCE_READ_CSR_MPU(sc, csr, MPU_EP_SEMAPHORE(sc));
if (post_status.bits.error) {
device_printf(sc->dev,
"POST failed: %x\n", post_status.dw0);
return ENXIO;
}
if (post_status.bits.stage == POST_STAGE_ARMFW_READY)
return 0;
}
device_printf(sc->dev, "POST timed out: %x\n", post_status.dw0);
return ENXIO;
}
/**
* @brief Function for hardware initialization
* @param sc software handle to the device
*/
int
oce_hw_init(POCE_SOFTC sc)
{
int rc = 0;
rc = oce_POST(sc);
if (rc)
return rc;
/* create the bootstrap mailbox */
rc = oce_dma_alloc(sc, sizeof(struct oce_bmbx), &sc->bsmbx, 0);
if (rc) {
device_printf(sc->dev, "Mailbox alloc failed\n");
return rc;
}
rc = oce_reset_fun(sc);
if (rc)
goto error;
rc = oce_mbox_init(sc);
if (rc)
goto error;
rc = oce_get_fw_version(sc);
if (rc)
goto error;
rc = oce_get_fw_config(sc);
if (rc)
goto error;
sc->macaddr.size_of_struct = 6;
rc = oce_read_mac_addr(sc, 0, 1, MAC_ADDRESS_TYPE_NETWORK,
&sc->macaddr);
if (rc)
goto error;
if ((IS_BE(sc) && (sc->flags & OCE_FLAGS_BE3)) || IS_SH(sc)) {
rc = oce_mbox_check_native_mode(sc);
if (rc)
goto error;
} else
sc->be3_native = 0;
return rc;
error:
oce_dma_free(sc, &sc->bsmbx);
device_printf(sc->dev, "Hardware initialisation failed\n");
return rc;
}
/**
* @brief Releases the obtained pci resources
* @param sc software handle to the device
*/
void
oce_hw_pci_free(POCE_SOFTC sc)
{
int pci_cfg_barnum = 0;
if (IS_BE(sc) && (sc->flags & OCE_FLAGS_BE2))
pci_cfg_barnum = OCE_DEV_BE2_CFG_BAR;
else
pci_cfg_barnum = OCE_DEV_CFG_BAR;
if (sc->devcfg_res != NULL) {
bus_release_resource(sc->dev,
SYS_RES_MEMORY,
PCIR_BAR(pci_cfg_barnum), sc->devcfg_res);
sc->devcfg_res = (struct resource *)NULL;
sc->devcfg_btag = (bus_space_tag_t) 0;
sc->devcfg_bhandle = (bus_space_handle_t)0;
sc->devcfg_vhandle = (void *)NULL;
}
if (sc->csr_res != NULL) {
bus_release_resource(sc->dev,
SYS_RES_MEMORY,
PCIR_BAR(OCE_PCI_CSR_BAR), sc->csr_res);
sc->csr_res = (struct resource *)NULL;
sc->csr_btag = (bus_space_tag_t)0;
sc->csr_bhandle = (bus_space_handle_t)0;
sc->csr_vhandle = (void *)NULL;
}
if (sc->db_res != NULL) {
bus_release_resource(sc->dev,
SYS_RES_MEMORY,
PCIR_BAR(OCE_PCI_DB_BAR), sc->db_res);
sc->db_res = (struct resource *)NULL;
sc->db_btag = (bus_space_tag_t)0;
sc->db_bhandle = (bus_space_handle_t)0;
sc->db_vhandle = (void *)NULL;
}
}
/**
* @brief Function to get the PCI capabilities
* @param sc software handle to the device
*/
static
void oce_get_pci_capabilities(POCE_SOFTC sc)
{
uint32_t val;
#if __FreeBSD_version >= 1000000
#define pci_find_extcap pci_find_cap
#endif
if (pci_find_extcap(sc->dev, PCIY_PCIX, &val) == 0) {
if (val != 0)
sc->flags |= OCE_FLAGS_PCIX;
}
if (pci_find_extcap(sc->dev, PCIY_EXPRESS, &val) == 0) {
if (val != 0) {
uint16_t link_status =
pci_read_config(sc->dev, val + 0x12, 2);
sc->flags |= OCE_FLAGS_PCIE;
sc->pcie_link_speed = link_status & 0xf;
sc->pcie_link_width = (link_status >> 4) & 0x3f;
}
}
if (pci_find_extcap(sc->dev, PCIY_MSI, &val) == 0) {
if (val != 0)
sc->flags |= OCE_FLAGS_MSI_CAPABLE;
}
if (pci_find_extcap(sc->dev, PCIY_MSIX, &val) == 0) {
if (val != 0) {
val = pci_msix_count(sc->dev);
sc->flags |= OCE_FLAGS_MSIX_CAPABLE;
}
}
}
/**
* @brief Allocate PCI resources.
*
* @param sc software handle to the device
* @returns 0 if successful, or error
*/
int
oce_hw_pci_alloc(POCE_SOFTC sc)
{
int rr, pci_cfg_barnum = 0;
pci_sli_intf_t intf;
pci_enable_busmaster(sc->dev);
oce_get_pci_capabilities(sc);
sc->fn = pci_get_function(sc->dev);
/* setup the device config region */
if (IS_BE(sc) && (sc->flags & OCE_FLAGS_BE2))
pci_cfg_barnum = OCE_DEV_BE2_CFG_BAR;
else
pci_cfg_barnum = OCE_DEV_CFG_BAR;
rr = PCIR_BAR(pci_cfg_barnum);
if (IS_BE(sc) || IS_SH(sc))
sc->devcfg_res = bus_alloc_resource_any(sc->dev,
SYS_RES_MEMORY, &rr,
RF_ACTIVE|RF_SHAREABLE);
else
sc->devcfg_res = bus_alloc_resource_anywhere(sc->dev,
SYS_RES_MEMORY, &rr, 32768,
RF_ACTIVE|RF_SHAREABLE);
if (!sc->devcfg_res)
goto error;
sc->devcfg_btag = rman_get_bustag(sc->devcfg_res);
sc->devcfg_bhandle = rman_get_bushandle(sc->devcfg_res);
sc->devcfg_vhandle = rman_get_virtual(sc->devcfg_res);
/* Read the SLI_INTF register and determine whether we
* can use this port and its features
*/
intf.dw0 = pci_read_config((sc)->dev,OCE_INTF_REG_OFFSET,4);
if (intf.bits.sli_valid != OCE_INTF_VALID_SIG)
goto error;
if (intf.bits.sli_rev != OCE_INTF_SLI_REV4) {
device_printf(sc->dev, "Adapter doesnt support SLI4\n");
goto error;
}
if (intf.bits.sli_if_type == OCE_INTF_IF_TYPE_1)
sc->flags |= OCE_FLAGS_MBOX_ENDIAN_RQD;
if (intf.bits.sli_hint1 == OCE_INTF_FUNC_RESET_REQD)
sc->flags |= OCE_FLAGS_FUNCRESET_RQD;
if (intf.bits.sli_func_type == OCE_INTF_VIRT_FUNC)
sc->flags |= OCE_FLAGS_VIRTUAL_PORT;
/* Lancer has one BAR (CFG) but BE3 has three (CFG, CSR, DB) */
if (IS_BE(sc) || IS_SH(sc)) {
/* set up CSR region */
rr = PCIR_BAR(OCE_PCI_CSR_BAR);
sc->csr_res = bus_alloc_resource_any(sc->dev,
SYS_RES_MEMORY, &rr, RF_ACTIVE|RF_SHAREABLE);
if (!sc->csr_res)
goto error;
sc->csr_btag = rman_get_bustag(sc->csr_res);
sc->csr_bhandle = rman_get_bushandle(sc->csr_res);
sc->csr_vhandle = rman_get_virtual(sc->csr_res);
/* set up DB doorbell region */
rr = PCIR_BAR(OCE_PCI_DB_BAR);
sc->db_res = bus_alloc_resource_any(sc->dev,
SYS_RES_MEMORY, &rr, RF_ACTIVE|RF_SHAREABLE);
if (!sc->db_res)
goto error;
sc->db_btag = rman_get_bustag(sc->db_res);
sc->db_bhandle = rman_get_bushandle(sc->db_res);
sc->db_vhandle = rman_get_virtual(sc->db_res);
}
return 0;
error:
oce_hw_pci_free(sc);
return ENXIO;
}
/**
* @brief Function for device shutdown
* @param sc software handle to the device
* @returns 0 on success, error otherwise
*/
void
oce_hw_shutdown(POCE_SOFTC sc)
{
oce_stats_free(sc);
/* disable hardware interrupts */
oce_hw_intr_disable(sc);
#if defined(INET6) || defined(INET)
/* Free LRO resources */
oce_free_lro(sc);
#endif
/* Release queue*/
oce_queue_release_all(sc);
/*Delete Network Interface*/
oce_delete_nw_interface(sc);
/* After fw clean we dont send any cmds to fw.*/
oce_fw_clean(sc);
/* release intr resources */
oce_intr_free(sc);
/* release PCI resources */
oce_hw_pci_free(sc);
/* free mbox specific resources */
LOCK_DESTROY(&sc->bmbx_lock);
LOCK_DESTROY(&sc->dev_lock);
oce_dma_free(sc, &sc->bsmbx);
}
/**
* @brief Function for creating nw interface.
* @param sc software handle to the device
* @returns 0 on success, error otherwise
*/
int
oce_create_nw_interface(POCE_SOFTC sc)
{
int rc;
uint32_t capab_flags;
uint32_t capab_en_flags;
/* interface capabilities to give device when creating interface */
capab_flags = OCE_CAPAB_FLAGS;
/* capabilities to enable by default (others set dynamically) */
capab_en_flags = OCE_CAPAB_ENABLE;
if (IS_XE201(sc)) {
/* LANCER A0 workaround */
capab_en_flags &= ~MBX_RX_IFACE_FLAGS_PASS_L3L4_ERR;
capab_flags &= ~MBX_RX_IFACE_FLAGS_PASS_L3L4_ERR;
}
if (IS_SH(sc) || IS_XE201(sc))
capab_flags |= MBX_RX_IFACE_FLAGS_MULTICAST;
if (sc->enable_hwlro) {
capab_flags |= MBX_RX_IFACE_FLAGS_LRO;
capab_en_flags |= MBX_RX_IFACE_FLAGS_LRO;
}
/* enable capabilities controlled via driver startup parameters */
if (is_rss_enabled(sc))
capab_en_flags |= MBX_RX_IFACE_FLAGS_RSS;
else {
capab_en_flags &= ~MBX_RX_IFACE_FLAGS_RSS;
capab_flags &= ~MBX_RX_IFACE_FLAGS_RSS;
}
rc = oce_if_create(sc,
capab_flags,
capab_en_flags,
0, &sc->macaddr.mac_addr[0], &sc->if_id);
if (rc)
return rc;
atomic_inc_32(&sc->nifs);
sc->if_cap_flags = capab_en_flags;
/* set default flow control */
rc = oce_set_flow_control(sc, sc->flow_control);
if (rc)
goto error;
rc = oce_rxf_set_promiscuous(sc, sc->promisc);
if (rc)
goto error;
return rc;
error:
oce_delete_nw_interface(sc);
return rc;
}
/**
* @brief Function to delete a nw interface.
* @param sc software handle to the device
*/
void
oce_delete_nw_interface(POCE_SOFTC sc)
{
/* currently only single interface is implmeneted */
if (sc->nifs > 0) {
oce_if_del(sc, sc->if_id);
atomic_dec_32(&sc->nifs);
}
}
/**
* @brief Soft reset.
* @param sc software handle to the device
* @returns 0 on success, error otherwise
*/
int
oce_pci_soft_reset(POCE_SOFTC sc)
{
int rc;
mpu_ep_control_t ctrl;
ctrl.dw0 = OCE_READ_CSR_MPU(sc, csr, MPU_EP_CONTROL);
ctrl.bits.cpu_reset = 1;
OCE_WRITE_CSR_MPU(sc, csr, MPU_EP_CONTROL, ctrl.dw0);
DELAY(50);
rc=oce_POST(sc);
return rc;
}
/**
* @brief Function for hardware start
* @param sc software handle to the device
* @returns 0 on success, error otherwise
*/
int
oce_hw_start(POCE_SOFTC sc)
{
struct link_status link = { 0 };
int rc = 0;
rc = oce_get_link_status(sc, &link);
if (rc)
return 1;
if (link.logical_link_status == NTWK_LOGICAL_LINK_UP) {
sc->link_status = NTWK_LOGICAL_LINK_UP;
if_link_state_change(sc->ifp, LINK_STATE_UP);
} else {
sc->link_status = NTWK_LOGICAL_LINK_DOWN;
if_link_state_change(sc->ifp, LINK_STATE_DOWN);
}
sc->link_speed = link.phys_port_speed;
sc->qos_link_speed = (uint32_t )link.qos_link_speed * 10;
rc = oce_start_mq(sc->mq);
/* we need to get MCC aync events. So enable intrs and arm
first EQ, Other EQs will be armed after interface is UP
*/
oce_hw_intr_enable(sc);
oce_arm_eq(sc, sc->eq[0]->eq_id, 0, TRUE, FALSE);
/* Send first mcc cmd and after that we get gracious
MCC notifications from FW
*/
oce_first_mcc_cmd(sc);
return rc;
}
/**
* @brief Function for hardware enable interupts.
* @param sc software handle to the device
*/
void
oce_hw_intr_enable(POCE_SOFTC sc)
{
uint32_t reg;
reg = OCE_READ_REG32(sc, devcfg, PCICFG_INTR_CTRL);
reg |= HOSTINTR_MASK;
OCE_WRITE_REG32(sc, devcfg, PCICFG_INTR_CTRL, reg);
}
/**
* @brief Function for hardware disable interupts
* @param sc software handle to the device
*/
void
oce_hw_intr_disable(POCE_SOFTC sc)
{
uint32_t reg;
reg = OCE_READ_REG32(sc, devcfg, PCICFG_INTR_CTRL);
reg &= ~HOSTINTR_MASK;
OCE_WRITE_REG32(sc, devcfg, PCICFG_INTR_CTRL, reg);
}
/**
* @brief Function for hardware update multicast filter
* @param sc software handle to the device
*/
int
oce_hw_update_multicast(POCE_SOFTC sc)
{
struct ifnet *ifp = sc->ifp;
struct ifmultiaddr *ifma;
struct mbx_set_common_iface_multicast *req = NULL;
OCE_DMA_MEM dma;
int rc = 0;
/* Allocate DMA mem*/
if (oce_dma_alloc(sc, sizeof(struct mbx_set_common_iface_multicast),
&dma, 0))
return ENOMEM;
req = OCE_DMAPTR(&dma, struct mbx_set_common_iface_multicast);
bzero(req, sizeof(struct mbx_set_common_iface_multicast));
#if __FreeBSD_version > 800000
if_maddr_rlock(ifp);
#endif
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
if (ifma->ifma_addr->sa_family != AF_LINK)
continue;
if (req->params.req.num_mac == OCE_MAX_MC_FILTER_SIZE) {
/*More multicast addresses than our hardware table
So Enable multicast promiscus in our hardware to
accept all multicat packets
*/
req->params.req.promiscuous = 1;
break;
}
bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
&req->params.req.mac[req->params.req.num_mac],
ETH_ADDR_LEN);
req->params.req.num_mac = req->params.req.num_mac + 1;
}
#if __FreeBSD_version > 800000
if_maddr_runlock(ifp);
#endif
req->params.req.if_id = sc->if_id;
rc = oce_update_multicast(sc, &dma);
oce_dma_free(sc, &dma);
return rc;
}