freebsd-nq/sys/i386/isa/if_lnc.h
Mike Smith 2512c3e67b Add support for PCNet PCI chips that only work when we talk to them as ISA
devices. Specifically fix the case for the Hitachi version as used in
their VisionBook models.

Submitted by:	Ted Faber <faber@isi.edu>
1998-07-20 17:33:01 +00:00

182 lines
4.4 KiB
C

/*
* Copyright (c) 1994, Paul Richards. This software may be used, modified,
* copied, distributed, and sold, in both source and binary form provided
* that the above copyright and these terms are retained. Under no
* circumstances is the author responsible for the proper functioning
* of this software, nor does the author assume any responsibility
* for damages incurred with its use.
*
*/
#include <i386/isa/ic/Am7990.h>
/*
* Initialize multicast address hashing registers to accept
* all multicasts (only used when in promiscuous mode)
*/
#if NBPFILTER > 0
#define MULTI_INIT_ADDR 0xff
#else
#define MULTI_INIT_ADDR 0
#endif
#define NORMAL 0
#define NRDRE 3
#define NTDRE 3
#define RECVBUFSIZE 1518 /* Packet size rounded to dword boundary */
#define TRANSBUFSIZE 1518
#define MBUF_CACHE_LIMIT 0
#define MEM_SLEW 8
/* BICC port addresses */
#define BICC_IOSIZE 16
#define BICC_RDP 0x0c /* Register Data Port */
#define BICC_RAP 0x0e /* Register Address Port */
/* NE2100 port addresses */
#define NE2100_IOSIZE 24
#define PCNET_RDP 0x10 /* Register Data Port */
#define PCNET_RAP 0x12 /* Register Address Port */
#define PCNET_RESET 0x14
#define PCNET_IDP 0x16
#define PCNET_VSW 0x18
/* DEPCA port addresses */
#define DEPCA_IOSIZE 16
#define DEPCA_CTRL 0x00 /* NIC Control and status register */
#define DEPCA_RDP 0x04 /* Register Data Port */
#define DEPCA_RAP 0x06 /* Register Address Port */
#define DEPCA_ADP 0x0c
/* DEPCA specific defines */
#define DEPCA_ADDR_ROM_SIZE 32
#ifdef PC98
/* C-NET(98)S port addresses */
#define CNET98S_RDP 0x400 /* Register Data Port */
#define CNET98S_RAP 0x402 /* Register Address Port */
#define CNET98S_RESET 0x404
#define CNET98S_IDP 0x406
#define CNET98S_EEPROM 0x40e
/*
* XXX - The I/O address range is fragmented in the C-NET(98)S.
* This is the number of regs at iobase.
*/
#define CNET98S_IOSIZE 16 /* # of i/o addresses used. */
#endif
/* Chip types */
#define LANCE 1 /* Am7990 */
#define C_LANCE 2 /* Am79C90 */
#define PCnet_ISA 3 /* Am79C960 */
#define PCnet_ISAplus 4 /* Am79C961 */
#define PCnet_32 5 /* Am79C965 */
#define PCnet_PCI 6 /* Am79C970 */
/* CSR88-89: Chip ID masks */
#define AMD_MASK 0x003
#define PART_MASK 0xffff
#define Am79C960 0x0003
#define Am79C961 0x2260
#define Am79C965 0x2430
#define Am79C970 0x0242
#define HITACHI_Am79C970 0x2621
/* Board types */
#define UNKNOWN 0
#define BICC 1
#define NE2100 2
#define DEPCA 3
#define CNET98S 4 /* PC-98 */
/* mem_mode values */
#define DMA_FIXED 1
#define DMA_MBUF 2
#define SHMEM 4
#define MEM_MODES \
"\20\3SHMEM\2DMA_MBUF\1DMA_FIXED"
#define CSR0_FLAGS \
"\20\20ERR\17BABL\16CERR\15MISS\14MERR\13RINT\12TINT\11IDON\
\10INTR\07INEA\06RXON\05TXON\04TDMD\03STOP\02STRT\01INIT"
#define INIT_MODE \
"\20\20PROM\07INTL\06DRTY\05COLL\04DTCR\03LOOP\02DTX\01DRX"
#define RECV_MD1 \
"\20\10OWN\7ERR\6FRAM\5OFLO\4CRC\3BUFF\2STP\1ENP"
#define TRANS_MD1 \
"\20\10OWN\7ERR\6RES\5MORE\4ONE\3DEF\2STP\1ENP"
#define TRANS_MD3 \
"\20\6BUFF\5UFLO\4RES\3LCOL\2LCAR\1RTRY"
struct nic_info {
int ident; /* Type of card */
int ic; /* Type of ic, Am7990, Am79C960 etc. */
int mem_mode;
int iobase;
int mode; /* Mode setting at initialization */
};
struct host_ring_entry {
struct mds *md;
union {
struct mbuf *mbuf;
char *data;
}buff;
};
#ifdef LNC_KEEP_STATS
#define LNCSTATS_STRUCT \
struct lnc_stats { \
int idon; \
int rint; \
int tint; \
int cerr; \
int babl; \
int miss; \
int merr; \
int rxoff; \
int txoff; \
int terr; \
int lcol; \
int lcar; \
int tbuff; \
int def; \
int more; \
int one; \
int uflo; \
int rtry; \
int rerr; \
int fram; \
int oflo; \
int crc; \
int rbuff; \
int drop_packet; \
int trans_ring_full; \
} lnc_stats;
#define LNCSTATS(X) ++(sc->lnc_stats.X);
#else
#define LNCSTATS_STRUCT
#define LNCSTATS(X)
#endif
#define NDESC(len2) (1 << len2)
#define INC_MD_PTR(ptr, no_entries) \
if (++ptr >= NDESC(no_entries)) \
ptr = 0;
#define DEC_MD_PTR(ptr, no_entries) \
if (--ptr < 0) \
ptr = NDESC(no_entries) - 1;
#define RECV_NEXT (sc->recv_ring->base + sc->recv_next)
#define TRANS_NEXT (sc->trans_ring->base + sc->trans_next)