d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-nq/sys/dev/usb
History
Gavin Atkinson ce617aca0a Sync the list of devices supported by uslcom(4) with NetBSD, Linux, OpenBSD 
and BeOS.  The devices supported by uslcom(4) are now in sync with:

NetBSD  src/sys/dev/usb/uslsa.c 1.11
OpenBSD src/sys/dev/usb/uslcom.c 1.20
Linux   source/drivers/usb/serial/cp210x.c from kernel 2.6.35
BeOS    usb_serial/driver.c 1.32

Two vendor/product IDs from Linux have not been added to uslcom(4):
  SILABS SAEL - This device has special code in u3g to support it
  SILABS GSM2228 - I suspect this should also be covered by u3g(4).

MFC after:	1 week
2010-08-07 16:14:40 +00:00
..
controller
Add support for LOW speed BULK transfers. This mode is not recommended by the
2010-06-22 20:57:48 +00:00
input
Add uep(4), driver for USB onscreen touch panel from eGalax.
2010-05-25 21:20:56 +00:00
misc
Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
2010-04-22 21:31:34 +00:00
net
- Support for Globetrotter iCON 452.
2010-07-20 03:10:22 +00:00
quirk
Disable sync cache for the Transcend Jetflash V90. It is more specific
2010-08-06 13:45:16 +00:00
serial
Sync the list of devices supported by uslcom(4) with NetBSD, Linux, OpenBSD
2010-08-07 16:14:40 +00:00
storage
Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
2010-04-22 21:31:34 +00:00
template
isochronous endpoint descriptors should have two more bytes which are zero by
2010-03-11 21:48:10 +00:00
wlan
Use more compact deviceid table.
2010-07-11 23:54:44 +00:00
ufm_ioctl.h
…
usb_bus.h
…
usb_busdma.c
Remove overuse of exclamation marks in kernel printfs, there mere fact a
2009-11-26 00:43:17 +00:00
usb_busdma.h
…
usb_cdc.h
The NetBSD Foundation has granted permission to remove clause 3 and 4 from
2010-03-03 10:18:03 +00:00
usb_compat_linux.c
Use a more obvious prefix for the USB control (endpoint 0) transfers rather
2010-04-22 22:15:08 +00:00
usb_compat_linux.h
…
usb_controller.h
…
usb_core.c
…
usb_core.h
Improve High Speed slot allocation mechanism by moving the computation to the
2009-11-22 21:16:43 +00:00
usb_debug.c
Provide tunables for some of the usb sysctls that affect boot behaviour.
2009-11-22 21:21:22 +00:00
usb_debug.h
Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
2010-04-22 21:31:34 +00:00
usb_dev.c
fix a few cases where a string is passed via format argument instead of
2010-06-11 19:27:21 +00:00
usb_dev.h
…
usb_device.c
fix a few cases where a string is passed via format argument instead of
2010-06-11 19:27:21 +00:00
usb_device.h
If a USB device is suspended and a USB set config request is issued when the
2010-05-12 22:42:35 +00:00
usb_dynamic.c
Use the EVENTHANDLER system to hook into the usb device configuration and
2009-12-17 21:42:10 +00:00
usb_dynamic.h
Use the EVENTHANDLER system to hook into the usb device configuration and
2009-12-17 21:42:10 +00:00
usb_endian.h
…
usb_error.c
…
usb_freebsd.h
Change USB_DEBUG to #ifdef and allow it to be turned off. Previously this had
2010-04-22 21:31:34 +00:00
usb_generic.c
If a USB device is suspended and a USB set config request is issued when the
2010-05-12 22:42:35 +00:00
usb_generic.h
…
usb_handle_request.c
…
usb_hid.c
Support getting signed and unsigned HID data.
2010-05-12 22:50:23 +00:00
usb_hub.c
Provide more information about the device location in the USB system.
2010-05-12 22:44:57 +00:00
usb_hub.h
Improve High Speed slot allocation mechanism by moving the computation to the
2009-11-22 21:16:43 +00:00
usb_if.m
…
usb_ioctl.h
…
usb_lookup.c
…
usb_mbuf.c
…
usb_mbuf.h
…
usb_msctest.c
Add support for the E1752 3G modem and the required eject command.
2010-02-14 20:05:12 +00:00
usb_msctest.h
Add support for the E1752 3G modem and the required eject command.
2010-02-14 20:05:12 +00:00
usb_parse.c
…
usb_pci.h
…
usb_process.c
fix a few cases where a string is passed via format argument instead of
2010-06-11 19:27:21 +00:00
usb_process.h
…
usb_request.c
Reduce diffs to p4.
2010-05-12 23:40:44 +00:00
usb_request.h
…
usb_transfer.c
Add support for LOW speed BULK transfers. This mode is not recommended by the
2010-06-22 20:57:48 +00:00
usb_transfer.h
Use a more obvious prefix for the USB control (endpoint 0) transfers rather
2010-04-22 22:15:08 +00:00
usb_util.c
…
usb_util.h
…
usb.h
…
usbdevs
Sync the list of devices supported by uslcom(4) with NetBSD, Linux, OpenBSD
2010-08-07 16:14:40 +00:00
usbdi_util.h
…
usbdi.h
Use the EVENTHANDLER system to hook into the usb device configuration and
2009-12-17 21:42:10 +00:00
usbhid.h
Support getting signed and unsigned HID data.
2010-05-12 22:50:23 +00:00