477e3eff7e
Add RTL8366SR support at etherswitch driver. Tested on RTL8366RB and RTL8366SR. Submitted by: Hiroki Mori <yamori813@yahoo.co.jp> Reviewed by: adrian, mizhka Approved by: adrian(mentor) Differential Revision: https://reviews.freebsd.org/D6796
183 lines
6.8 KiB
C
183 lines
6.8 KiB
C
/*-
|
|
* Copyright (c) 2015-2016 Hiroki Mori.
|
|
* Copyright (c) 2011-2012 Stefan Bethke.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _DEV_ETHERSWITCH_RTL8366RBVAR_H_
|
|
#define _DEV_ETHERSWITCH_RTL8366RBVAR_H_
|
|
|
|
#define RTL8366_IIC_ADDR 0xa8
|
|
#define RTL_IICBUS_TIMEOUT 100 /* us */
|
|
#define RTL_IICBUS_READ 1
|
|
#define RTL_IICBUS_WRITE 0
|
|
/* number of times to try and select the chip on the I2C bus */
|
|
#define RTL_IICBUS_RETRIES 3
|
|
#define RTL_IICBUS_RETRY_SLEEP (hz/1000)
|
|
|
|
/* Register definitions */
|
|
|
|
/* Switch Global Configuration */
|
|
#define RTL8366_SGCR 0x0000
|
|
#define RTL8366_SGCR_EN_BC_STORM_CTRL 0x0001
|
|
#define RTL8366_SGCR_MAX_LENGTH_MASK 0x0030
|
|
#define RTL8366_SGCR_MAX_LENGTH_1522 0x0000
|
|
#define RTL8366_SGCR_MAX_LENGTH_1536 0x0010
|
|
#define RTL8366_SGCR_MAX_LENGTH_1552 0x0020
|
|
#define RTL8366_SGCR_MAX_LENGTH_9216 0x0030
|
|
#define RTL8366_SGCR_EN_VLAN 0x2000
|
|
#define RTL8366_SGCR_EN_VLAN_4KTB 0x4000
|
|
#define RTL8366_SGCR_EN_QOS 0x8000
|
|
|
|
/* Port Enable Control: DISABLE_PORT[5:0] */
|
|
#define RTL8366_PECR 0x0001
|
|
|
|
/* Switch Security Control 0: DIS_LEARN[5:0] */
|
|
#define RTL8366_SSCR0 0x0002
|
|
|
|
/* Switch Security Control 1: DIS_AGE[5:0] */
|
|
#define RTL8366_SSCR1 0x0003
|
|
|
|
/* Switch Security Control 2 */
|
|
#define RTL8366_SSCR2 0x0004
|
|
#define RTL8366_SSCR2_DROP_UNKNOWN_DA 0x0001
|
|
|
|
/* Port Link Status: two ports per register */
|
|
#define RTL8366_PLSR_BASE (sc->chip_type == 0 ? 0x0014 : 0x0060)
|
|
#define RTL8366_PLSR_SPEED_MASK 0x03
|
|
#define RTL8366_PLSR_SPEED_10 0x00
|
|
#define RTL8366_PLSR_SPEED_100 0x01
|
|
#define RTL8366_PLSR_SPEED_1000 0x02
|
|
#define RTL8366_PLSR_FULLDUPLEX 0x04
|
|
#define RTL8366_PLSR_LINK 0x10
|
|
#define RTL8366_PLSR_TXPAUSE 0x20
|
|
#define RTL8366_PLSR_RXPAUSE 0x40
|
|
#define RTL8366_PLSR_NO_AUTO 0x80
|
|
|
|
/* VLAN Member Configuration, 3 or 2 registers per VLAN */
|
|
#define RTL8366_VMCR_BASE (sc->chip_type == 0 ? 0x0020 : 0x0016)
|
|
#define RTL8366_VMCR_MULT (sc->chip_type == 0 ? 3 : 2)
|
|
#define RTL8366_VMCR_DOT1Q_REG 0
|
|
#define RTL8366_VMCR_DOT1Q_VID_SHIFT 0
|
|
#define RTL8366_VMCR_DOT1Q_VID_MASK 0x0fff
|
|
#define RTL8366_VMCR_DOT1Q_PCP_SHIFT 12
|
|
#define RTL8366_VMCR_DOT1Q_PCP_MASK 0x7000
|
|
#define RTL8366_VMCR_MU_REG 1
|
|
#define RTL8366_VMCR_MU_MEMBER_SHIFT 0
|
|
#define RTL8366_VMCR_MU_MEMBER_MASK (sc->chip_type == 0 ? 0x00ff : 0x003f)
|
|
#define RTL8366_VMCR_MU_UNTAG_SHIFT (sc->chip_type == 0 ? 8 : 6)
|
|
#define RTL8366_VMCR_MU_UNTAG_MASK (sc->chip_type == 0 ? 0xff00 : 0x0fc0)
|
|
#define RTL8366_VMCR_FID_REG (sc->chip_type == 0 ? 2 : 1)
|
|
#define RTL8366_VMCR_FID_FID_SHIFT (sc->chip_type == 0 ? 0 : 12)
|
|
#define RTL8366_VMCR_FID_FID_MASK (sc->chip_type == 0 ? 0x0007 : 0x7000)
|
|
#define RTL8366_VMCR(_reg, _vlan) \
|
|
(RTL8366_VMCR_BASE + _reg + _vlan * RTL8366_VMCR_MULT)
|
|
/* VLAN Identifier */
|
|
#define RTL8366_VMCR_VID(_r) \
|
|
(_r[RTL8366_VMCR_DOT1Q_REG] & RTL8366_VMCR_DOT1Q_VID_MASK)
|
|
/* Priority Code Point */
|
|
#define RTL8366_VMCR_PCP(_r) \
|
|
((_r[RTL8366_VMCR_DOT1Q_REG] & RTL8366_VMCR_DOT1Q_PCP_MASK) \
|
|
>> RTL8366_VMCR_DOT1Q_PCP_SHIFT)
|
|
/* Member ports */
|
|
#define RTL8366_VMCR_MEMBER(_r) \
|
|
(_r[RTL8366_VMCR_MU_REG] & RTL8366_VMCR_MU_MEMBER_MASK)
|
|
/* Untagged ports */
|
|
#define RTL8366_VMCR_UNTAG(_r) \
|
|
((_r[RTL8366_VMCR_MU_REG] & RTL8366_VMCR_MU_UNTAG_MASK) \
|
|
>> RTL8366_VMCR_MU_UNTAG_SHIFT)
|
|
/* Forwarding ID */
|
|
#define RTL8366_VMCR_FID(_r) \
|
|
(sc->chip_type == 0 ? (_r[RTL8366_VMCR_FID_REG] & RTL8366_VMCR_FID_FID_MASK) : \
|
|
((_r[RTL8366_VMCR_FID_REG] & RTL8366_VMCR_FID_FID_MASK) \
|
|
>> RTL8366_VMCR_FID_FID_SHIFT))
|
|
|
|
/*
|
|
* Port VLAN Control, 4 ports per register
|
|
* Determines the VID for untagged ingress frames through
|
|
* index into VMC.
|
|
*/
|
|
#define RTL8366_PVCR_BASE (sc->chip_type == 0 ? 0x0063 : 0x0058)
|
|
#define RTL8366_PVCR_PORT_SHIFT 4
|
|
#define RTL8366_PVCR_PORT_PERREG (16 / RTL8366_PVCR_PORT_SHIFT)
|
|
#define RTL8366_PVCR_PORT_MASK 0x000f
|
|
#define RTL8366_PVCR_REG(_port) \
|
|
(RTL8366_PVCR_BASE + _port / (RTL8366_PVCR_PORT_PERREG))
|
|
#define RTL8366_PVCR_VAL(_port, _pvlan) \
|
|
((_pvlan & RTL8366_PVCR_PORT_MASK) << \
|
|
((_port % RTL8366_PVCR_PORT_PERREG) * RTL8366_PVCR_PORT_SHIFT))
|
|
#define RTL8366_PVCR_GET(_port, _val) \
|
|
(((_val) >> ((_port % RTL8366_PVCR_PORT_PERREG) * RTL8366_PVCR_PORT_SHIFT)) & RTL8366_PVCR_PORT_MASK)
|
|
|
|
/* Reset Control */
|
|
#define RTL8366_RCR 0x0100
|
|
#define RTL8366_RCR_HARD_RESET 0x0001
|
|
#define RTL8366_RCR_SOFT_RESET 0x0002
|
|
|
|
/* Chip Version Control: CHIP_VER[3:0] */
|
|
#define RTL8366_CVCR (sc->chip_type == 0 ? 0x050A : 0x0104)
|
|
/* Chip Identifier */
|
|
#define RTL8366RB_CIR 0x0509
|
|
#define RTL8366RB_CIR_ID8366RB 0x5937
|
|
#define RTL8366SR_CIR 0x0105
|
|
#define RTL8366SR_CIR_ID8366SR 0x8366
|
|
|
|
/* VLAN Ingress Control 2: [5:0] */
|
|
#define RTL8366_VIC2R 0x037f
|
|
|
|
/* MIB registers */
|
|
#define RTL8366_MCNT_BASE 0x1000
|
|
#define RTL8366_MCTLR (sc->chip_type == 0 ? 0x13f0 : 0x11F0)
|
|
#define RTL8366_MCTLR_BUSY 0x0001
|
|
#define RTL8366_MCTLR_RESET 0x0002
|
|
#define RTL8366_MCTLR_RESET_PORT_MASK 0x00fc
|
|
#define RTL8366_MCTLR_RESET_ALL 0x0800
|
|
|
|
#define RTL8366_MCNT(_port, _r) \
|
|
(RTL8366_MCNT_BASE + 0x50 * (_port) + (_r))
|
|
#define RTL8366_MCTLR_RESET_PORT(_p) \
|
|
(1 << ((_p) + 2))
|
|
|
|
/* PHY Access Control */
|
|
#define RTL8366_PACR (sc->chip_type == 0 ? 0x8000 : 0x8028)
|
|
#define RTL8366_PACR_WRITE 0x0000
|
|
#define RTL8366_PACR_READ 0x0001
|
|
|
|
/* PHY Access Data */
|
|
#define RTL8366_PADR (sc->chip_type == 0 ? 0x8002 : 0x8029)
|
|
|
|
#define RTL8366_PHYREG(phy, page, reg) \
|
|
(0x8000 | (1 << (((phy) & 0x1f) + 9)) | (((page) & (sc->chip_type == 0 ? 0xf : 0x7)) << 5) | ((reg) & 0x1f))
|
|
|
|
/* general characteristics of the chip */
|
|
#define RTL8366_CPU_PORT 5
|
|
#define RTL8366_NUM_PORTS 6
|
|
#define RTL8366_NUM_PHYS (RTL8366_NUM_PORTS-1)
|
|
#define RTL8366_NUM_VLANS 16
|
|
#define RTL8366_NUM_PHY_REG 32
|
|
|
|
#endif
|