1f317bf968
the switch statement in order to make this driver more like other Ethernet NIC drivers. - In gem_attach() call gem_stop() in addition to gem_reset() to make sure the chip actually is stopped and not just reset. - In gem_stop() also stop the gem_rint_timeout() callout in case the driver is compiled with GEM_RINT_TIMEOUT defined. Merge some locking improvements from hme(4): - Use callout_init_mtx() to close races between gem_stop() and gem_tick() as weel as gem_stop() and gem_rint() in case the driver is compiled with GEM_RINT_TIMEOUT defined. - Use the driver lock instead of Giant in a bus dma callback. - Lock the driver lock around mii operations. - Cleanup locking in gem_ioctl(). - Remove redundant assertions that the driver lock is not held in gem_attach() and gem_detach() since mtx_lock() will assert that already since the driver lock is not recursive. - Add callout_drain()'s to gem_detach() after calling gem_stop() to make sure that if softclock is running on another CPU and is blocked on our driver lock, we will wait until it has acquired the lock, seen that it was cancelled, dropped the lock, and awakened us so that we can safely destroy the mutex.
1983 lines
49 KiB
C
1983 lines
49 KiB
C
/*-
|
|
* Copyright (C) 2001 Eduardo Horvath.
|
|
* Copyright (c) 2001-2003 Thomas Moestl
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: NetBSD: gem.c,v 1.21 2002/06/01 23:50:58 lukem Exp
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* Driver for Sun GEM ethernet controllers.
|
|
*/
|
|
|
|
#if 0
|
|
#define GEM_DEBUG
|
|
#endif
|
|
|
|
#if 0 /* XXX: In case of emergency, re-enable this. */
|
|
#define GEM_RINT_TIMEOUT
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sockio.h>
|
|
|
|
#include <net/bpf.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_vlan_var.h>
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/gem/if_gemreg.h>
|
|
#include <dev/gem/if_gemvar.h>
|
|
|
|
#define TRIES 10000
|
|
|
|
static void gem_start(struct ifnet *);
|
|
static void gem_start_locked(struct ifnet *);
|
|
static void gem_stop(struct ifnet *, int);
|
|
static int gem_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static void gem_cddma_callback(void *, bus_dma_segment_t *, int, int);
|
|
static void gem_txdma_callback(void *, bus_dma_segment_t *, int,
|
|
bus_size_t, int);
|
|
static void gem_tick(void *);
|
|
static void gem_watchdog(struct ifnet *);
|
|
static void gem_init(void *);
|
|
static void gem_init_locked(struct gem_softc *sc);
|
|
static void gem_init_regs(struct gem_softc *sc);
|
|
static int gem_ringsize(int sz);
|
|
static int gem_meminit(struct gem_softc *);
|
|
static int gem_load_txmbuf(struct gem_softc *, struct mbuf *);
|
|
static void gem_mifinit(struct gem_softc *);
|
|
static int gem_bitwait(struct gem_softc *sc, bus_addr_t r,
|
|
u_int32_t clr, u_int32_t set);
|
|
static int gem_reset_rx(struct gem_softc *);
|
|
static int gem_reset_tx(struct gem_softc *);
|
|
static int gem_disable_rx(struct gem_softc *);
|
|
static int gem_disable_tx(struct gem_softc *);
|
|
static void gem_rxdrain(struct gem_softc *);
|
|
static int gem_add_rxbuf(struct gem_softc *, int);
|
|
static void gem_setladrf(struct gem_softc *);
|
|
|
|
struct mbuf *gem_get(struct gem_softc *, int, int);
|
|
static void gem_eint(struct gem_softc *, u_int);
|
|
static void gem_rint(struct gem_softc *);
|
|
#ifdef GEM_RINT_TIMEOUT
|
|
static void gem_rint_timeout(void *);
|
|
#endif
|
|
static void gem_tint(struct gem_softc *);
|
|
#ifdef notyet
|
|
static void gem_power(int, void *);
|
|
#endif
|
|
|
|
devclass_t gem_devclass;
|
|
DRIVER_MODULE(miibus, gem, miibus_driver, miibus_devclass, 0, 0);
|
|
MODULE_DEPEND(gem, miibus, 1, 1, 1);
|
|
|
|
#ifdef GEM_DEBUG
|
|
#include <sys/ktr.h>
|
|
#define KTR_GEM KTR_CT2
|
|
#endif
|
|
|
|
#define GEM_NSEGS GEM_NTXDESC
|
|
|
|
/*
|
|
* gem_attach:
|
|
*
|
|
* Attach a Gem interface to the system.
|
|
*/
|
|
int
|
|
gem_attach(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
struct mii_softc *child;
|
|
int i, error;
|
|
u_int32_t v;
|
|
|
|
ifp = sc->sc_ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL)
|
|
return (ENOSPC);
|
|
|
|
callout_init_mtx(&sc->sc_tick_ch, &sc->sc_mtx, 0);
|
|
#ifdef GEM_RINT_TIMEOUT
|
|
callout_init_mtx(&sc->sc_rx_ch, &sc->sc_mtx, 0);
|
|
#endif
|
|
|
|
/* Make sure the chip is stopped. */
|
|
ifp->if_softc = sc;
|
|
GEM_LOCK(sc);
|
|
gem_stop(ifp, 0);
|
|
gem_reset(sc);
|
|
GEM_UNLOCK(sc);
|
|
|
|
error = bus_dma_tag_create(NULL, 1, 0, BUS_SPACE_MAXADDR_32BIT,
|
|
BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES, GEM_NSEGS,
|
|
BUS_SPACE_MAXSIZE_32BIT, 0, NULL, NULL, &sc->sc_pdmatag);
|
|
if (error)
|
|
goto fail_ifnet;
|
|
|
|
error = bus_dma_tag_create(sc->sc_pdmatag, 1, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MAXBSIZE,
|
|
1, BUS_SPACE_MAXSIZE_32BIT, BUS_DMA_ALLOCNOW, NULL, NULL,
|
|
&sc->sc_rdmatag);
|
|
if (error)
|
|
goto fail_ptag;
|
|
|
|
error = bus_dma_tag_create(sc->sc_pdmatag, 1, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
GEM_TD_BUFSIZE, GEM_NTXDESC, BUS_SPACE_MAXSIZE_32BIT,
|
|
BUS_DMA_ALLOCNOW, NULL, NULL, &sc->sc_tdmatag);
|
|
if (error)
|
|
goto fail_rtag;
|
|
|
|
error = bus_dma_tag_create(sc->sc_pdmatag, PAGE_SIZE, 0,
|
|
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
|
|
sizeof(struct gem_control_data), 1,
|
|
sizeof(struct gem_control_data), BUS_DMA_ALLOCNOW,
|
|
busdma_lock_mutex, &sc->sc_mtx, &sc->sc_cdmatag);
|
|
if (error)
|
|
goto fail_ttag;
|
|
|
|
/*
|
|
* Allocate the control data structures, and create and load the
|
|
* DMA map for it.
|
|
*/
|
|
if ((error = bus_dmamem_alloc(sc->sc_cdmatag,
|
|
(void **)&sc->sc_control_data, 0, &sc->sc_cddmamap))) {
|
|
device_printf(sc->sc_dev, "unable to allocate control data,"
|
|
" error = %d\n", error);
|
|
goto fail_ctag;
|
|
}
|
|
|
|
sc->sc_cddma = 0;
|
|
if ((error = bus_dmamap_load(sc->sc_cdmatag, sc->sc_cddmamap,
|
|
sc->sc_control_data, sizeof(struct gem_control_data),
|
|
gem_cddma_callback, sc, 0)) != 0 || sc->sc_cddma == 0) {
|
|
device_printf(sc->sc_dev, "unable to load control data DMA "
|
|
"map, error = %d\n", error);
|
|
goto fail_cmem;
|
|
}
|
|
|
|
/*
|
|
* Initialize the transmit job descriptors.
|
|
*/
|
|
STAILQ_INIT(&sc->sc_txfreeq);
|
|
STAILQ_INIT(&sc->sc_txdirtyq);
|
|
|
|
/*
|
|
* Create the transmit buffer DMA maps.
|
|
*/
|
|
error = ENOMEM;
|
|
for (i = 0; i < GEM_TXQUEUELEN; i++) {
|
|
struct gem_txsoft *txs;
|
|
|
|
txs = &sc->sc_txsoft[i];
|
|
txs->txs_mbuf = NULL;
|
|
txs->txs_ndescs = 0;
|
|
if ((error = bus_dmamap_create(sc->sc_tdmatag, 0,
|
|
&txs->txs_dmamap)) != 0) {
|
|
device_printf(sc->sc_dev, "unable to create tx DMA map "
|
|
"%d, error = %d\n", i, error);
|
|
goto fail_txd;
|
|
}
|
|
STAILQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
}
|
|
|
|
/*
|
|
* Create the receive buffer DMA maps.
|
|
*/
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
if ((error = bus_dmamap_create(sc->sc_rdmatag, 0,
|
|
&sc->sc_rxsoft[i].rxs_dmamap)) != 0) {
|
|
device_printf(sc->sc_dev, "unable to create rx DMA map "
|
|
"%d, error = %d\n", i, error);
|
|
goto fail_rxd;
|
|
}
|
|
sc->sc_rxsoft[i].rxs_mbuf = NULL;
|
|
}
|
|
|
|
gem_mifinit(sc);
|
|
|
|
if ((error = mii_phy_probe(sc->sc_dev, &sc->sc_miibus, gem_mediachange,
|
|
gem_mediastatus)) != 0) {
|
|
device_printf(sc->sc_dev, "phy probe failed: %d\n", error);
|
|
goto fail_rxd;
|
|
}
|
|
sc->sc_mii = device_get_softc(sc->sc_miibus);
|
|
|
|
/*
|
|
* From this point forward, the attachment cannot fail. A failure
|
|
* before this point releases all resources that may have been
|
|
* allocated.
|
|
*/
|
|
|
|
/* Get RX FIFO size */
|
|
sc->sc_rxfifosize = 64 *
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_RX_FIFO_SIZE);
|
|
|
|
/* Get TX FIFO size */
|
|
v = bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_FIFO_SIZE);
|
|
device_printf(sc->sc_dev, "%ukB RX FIFO, %ukB TX FIFO\n",
|
|
sc->sc_rxfifosize / 1024, v / 16);
|
|
|
|
/* Initialize ifnet structure. */
|
|
ifp->if_softc = sc;
|
|
if_initname(ifp, device_get_name(sc->sc_dev),
|
|
device_get_unit(sc->sc_dev));
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_start = gem_start;
|
|
ifp->if_ioctl = gem_ioctl;
|
|
ifp->if_watchdog = gem_watchdog;
|
|
ifp->if_init = gem_init;
|
|
ifp->if_snd.ifq_maxlen = GEM_TXQUEUELEN;
|
|
/*
|
|
* Walk along the list of attached MII devices and
|
|
* establish an `MII instance' to `phy number'
|
|
* mapping. We'll use this mapping in media change
|
|
* requests to determine which phy to use to program
|
|
* the MIF configuration register.
|
|
*/
|
|
for (child = LIST_FIRST(&sc->sc_mii->mii_phys); child != NULL;
|
|
child = LIST_NEXT(child, mii_list)) {
|
|
/*
|
|
* Note: we support just two PHYs: the built-in
|
|
* internal device and an external on the MII
|
|
* connector.
|
|
*/
|
|
if (child->mii_phy > 1 || child->mii_inst > 1) {
|
|
device_printf(sc->sc_dev, "cannot accomodate "
|
|
"MII device %s at phy %d, instance %d\n",
|
|
device_get_name(child->mii_dev),
|
|
child->mii_phy, child->mii_inst);
|
|
continue;
|
|
}
|
|
|
|
sc->sc_phys[child->mii_inst] = child->mii_phy;
|
|
}
|
|
|
|
/*
|
|
* Now select and activate the PHY we will use.
|
|
*
|
|
* The order of preference is External (MDI1),
|
|
* Internal (MDI0), Serial Link (no MII).
|
|
*/
|
|
if (sc->sc_phys[1]) {
|
|
#ifdef GEM_DEBUG
|
|
printf("using external phy\n");
|
|
#endif
|
|
sc->sc_mif_config |= GEM_MIF_CONFIG_PHY_SEL;
|
|
} else {
|
|
#ifdef GEM_DEBUG
|
|
printf("using internal phy\n");
|
|
#endif
|
|
sc->sc_mif_config &= ~GEM_MIF_CONFIG_PHY_SEL;
|
|
}
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_h, GEM_MIF_CONFIG,
|
|
sc->sc_mif_config);
|
|
/* Attach the interface. */
|
|
ether_ifattach(ifp, sc->sc_enaddr);
|
|
|
|
#if notyet
|
|
/*
|
|
* Add a suspend hook to make sure we come back up after a
|
|
* resume.
|
|
*/
|
|
sc->sc_powerhook = powerhook_establish(gem_power, sc);
|
|
if (sc->sc_powerhook == NULL)
|
|
device_printf(sc->sc_dev, "WARNING: unable to establish power "
|
|
"hook\n");
|
|
#endif
|
|
|
|
/*
|
|
* Tell the upper layer(s) we support long frames.
|
|
*/
|
|
ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
|
|
ifp->if_capabilities |= IFCAP_VLAN_MTU;
|
|
ifp->if_capenable |= IFCAP_VLAN_MTU;
|
|
|
|
return (0);
|
|
|
|
/*
|
|
* Free any resources we've allocated during the failed attach
|
|
* attempt. Do this in reverse order and fall through.
|
|
*/
|
|
fail_rxd:
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
if (sc->sc_rxsoft[i].rxs_dmamap != NULL)
|
|
bus_dmamap_destroy(sc->sc_rdmatag,
|
|
sc->sc_rxsoft[i].rxs_dmamap);
|
|
}
|
|
fail_txd:
|
|
for (i = 0; i < GEM_TXQUEUELEN; i++) {
|
|
if (sc->sc_txsoft[i].txs_dmamap != NULL)
|
|
bus_dmamap_destroy(sc->sc_tdmatag,
|
|
sc->sc_txsoft[i].txs_dmamap);
|
|
}
|
|
bus_dmamap_unload(sc->sc_cdmatag, sc->sc_cddmamap);
|
|
fail_cmem:
|
|
bus_dmamem_free(sc->sc_cdmatag, sc->sc_control_data,
|
|
sc->sc_cddmamap);
|
|
fail_ctag:
|
|
bus_dma_tag_destroy(sc->sc_cdmatag);
|
|
fail_ttag:
|
|
bus_dma_tag_destroy(sc->sc_tdmatag);
|
|
fail_rtag:
|
|
bus_dma_tag_destroy(sc->sc_rdmatag);
|
|
fail_ptag:
|
|
bus_dma_tag_destroy(sc->sc_pdmatag);
|
|
fail_ifnet:
|
|
if_free(ifp);
|
|
return (error);
|
|
}
|
|
|
|
void
|
|
gem_detach(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
int i;
|
|
|
|
GEM_LOCK(sc);
|
|
gem_stop(ifp, 1);
|
|
GEM_UNLOCK(sc);
|
|
callout_drain(&sc->sc_tick_ch);
|
|
#ifdef GEM_RINT_TIMEOUT
|
|
callout_drain(&sc->sc_rx_ch);
|
|
#endif
|
|
ether_ifdetach(ifp);
|
|
if_free(ifp);
|
|
device_delete_child(sc->sc_dev, sc->sc_miibus);
|
|
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
if (sc->sc_rxsoft[i].rxs_dmamap != NULL)
|
|
bus_dmamap_destroy(sc->sc_rdmatag,
|
|
sc->sc_rxsoft[i].rxs_dmamap);
|
|
}
|
|
for (i = 0; i < GEM_TXQUEUELEN; i++) {
|
|
if (sc->sc_txsoft[i].txs_dmamap != NULL)
|
|
bus_dmamap_destroy(sc->sc_tdmatag,
|
|
sc->sc_txsoft[i].txs_dmamap);
|
|
}
|
|
GEM_CDSYNC(sc, BUS_DMASYNC_POSTREAD);
|
|
GEM_CDSYNC(sc, BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_cdmatag, sc->sc_cddmamap);
|
|
bus_dmamem_free(sc->sc_cdmatag, sc->sc_control_data,
|
|
sc->sc_cddmamap);
|
|
bus_dma_tag_destroy(sc->sc_cdmatag);
|
|
bus_dma_tag_destroy(sc->sc_tdmatag);
|
|
bus_dma_tag_destroy(sc->sc_rdmatag);
|
|
bus_dma_tag_destroy(sc->sc_pdmatag);
|
|
}
|
|
|
|
void
|
|
gem_suspend(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
|
|
GEM_LOCK(sc);
|
|
gem_stop(ifp, 0);
|
|
GEM_UNLOCK(sc);
|
|
}
|
|
|
|
void
|
|
gem_resume(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
|
|
GEM_LOCK(sc);
|
|
/*
|
|
* On resume all registers have to be initialized again like
|
|
* after power-on.
|
|
*/
|
|
sc->sc_inited = 0;
|
|
if (ifp->if_flags & IFF_UP)
|
|
gem_init_locked(sc);
|
|
GEM_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
gem_cddma_callback(xsc, segs, nsegs, error)
|
|
void *xsc;
|
|
bus_dma_segment_t *segs;
|
|
int nsegs;
|
|
int error;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)xsc;
|
|
|
|
if (error != 0)
|
|
return;
|
|
if (nsegs != 1) {
|
|
/* can't happen... */
|
|
panic("gem_cddma_callback: bad control buffer segment count");
|
|
}
|
|
sc->sc_cddma = segs[0].ds_addr;
|
|
}
|
|
|
|
static void
|
|
gem_txdma_callback(xsc, segs, nsegs, totsz, error)
|
|
void *xsc;
|
|
bus_dma_segment_t *segs;
|
|
int nsegs;
|
|
bus_size_t totsz;
|
|
int error;
|
|
{
|
|
struct gem_txdma *txd = (struct gem_txdma *)xsc;
|
|
struct gem_softc *sc = txd->txd_sc;
|
|
struct gem_txsoft *txs = txd->txd_txs;
|
|
bus_size_t len = 0;
|
|
uint64_t flags = 0;
|
|
int seg, nexttx;
|
|
|
|
if (error != 0)
|
|
return;
|
|
/*
|
|
* Ensure we have enough descriptors free to describe
|
|
* the packet. Note, we always reserve one descriptor
|
|
* at the end of the ring as a termination point, to
|
|
* prevent wrap-around.
|
|
*/
|
|
if (nsegs > sc->sc_txfree - 1) {
|
|
txs->txs_ndescs = -1;
|
|
return;
|
|
}
|
|
txs->txs_ndescs = nsegs;
|
|
|
|
nexttx = txs->txs_firstdesc;
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
for (seg = 0; seg < nsegs;
|
|
seg++, nexttx = GEM_NEXTTX(nexttx)) {
|
|
#ifdef GEM_DEBUG
|
|
CTR5(KTR_GEM, "txdma_cb: mapping seg %d (txd %d), len "
|
|
"%lx, addr %#lx (%#lx)", seg, nexttx,
|
|
segs[seg].ds_len, segs[seg].ds_addr,
|
|
GEM_DMA_WRITE(sc, segs[seg].ds_addr));
|
|
#endif
|
|
|
|
if (segs[seg].ds_len == 0)
|
|
continue;
|
|
sc->sc_txdescs[nexttx].gd_addr =
|
|
GEM_DMA_WRITE(sc, segs[seg].ds_addr);
|
|
KASSERT(segs[seg].ds_len < GEM_TD_BUFSIZE,
|
|
("gem_txdma_callback: segment size too large!"));
|
|
flags = segs[seg].ds_len & GEM_TD_BUFSIZE;
|
|
if (len == 0) {
|
|
#ifdef GEM_DEBUG
|
|
CTR2(KTR_GEM, "txdma_cb: start of packet at seg %d, "
|
|
"tx %d", seg, nexttx);
|
|
#endif
|
|
flags |= GEM_TD_START_OF_PACKET;
|
|
if (++sc->sc_txwin > GEM_NTXSEGS * 2 / 3) {
|
|
sc->sc_txwin = 0;
|
|
flags |= GEM_TD_INTERRUPT_ME;
|
|
}
|
|
}
|
|
if (len + segs[seg].ds_len == totsz) {
|
|
#ifdef GEM_DEBUG
|
|
CTR2(KTR_GEM, "txdma_cb: end of packet at seg %d, "
|
|
"tx %d", seg, nexttx);
|
|
#endif
|
|
flags |= GEM_TD_END_OF_PACKET;
|
|
}
|
|
sc->sc_txdescs[nexttx].gd_flags = GEM_DMA_WRITE(sc, flags);
|
|
txs->txs_lastdesc = nexttx;
|
|
len += segs[seg].ds_len;
|
|
}
|
|
KASSERT((flags & GEM_TD_END_OF_PACKET) != 0,
|
|
("gem_txdma_callback: missed end of packet!"));
|
|
}
|
|
|
|
static void
|
|
gem_tick(arg)
|
|
void *arg;
|
|
{
|
|
struct gem_softc *sc = arg;
|
|
|
|
GEM_LOCK_ASSERT(sc, MA_OWNED);
|
|
mii_tick(sc->sc_mii);
|
|
|
|
callout_reset(&sc->sc_tick_ch, hz, gem_tick, sc);
|
|
}
|
|
|
|
static int
|
|
gem_bitwait(sc, r, clr, set)
|
|
struct gem_softc *sc;
|
|
bus_addr_t r;
|
|
u_int32_t clr;
|
|
u_int32_t set;
|
|
{
|
|
int i;
|
|
u_int32_t reg;
|
|
|
|
for (i = TRIES; i--; DELAY(100)) {
|
|
reg = bus_space_read_4(sc->sc_bustag, sc->sc_h, r);
|
|
if ((r & clr) == 0 && (r & set) == set)
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
gem_reset(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR1(KTR_GEM, "%s: gem_reset", device_get_name(sc->sc_dev));
|
|
#endif
|
|
gem_reset_rx(sc);
|
|
gem_reset_tx(sc);
|
|
|
|
/* Do a full reset */
|
|
bus_space_write_4(t, h, GEM_RESET, GEM_RESET_RX | GEM_RESET_TX);
|
|
if (!gem_bitwait(sc, GEM_RESET, GEM_RESET_RX | GEM_RESET_TX, 0))
|
|
device_printf(sc->sc_dev, "cannot reset device\n");
|
|
}
|
|
|
|
|
|
/*
|
|
* gem_rxdrain:
|
|
*
|
|
* Drain the receive queue.
|
|
*/
|
|
static void
|
|
gem_rxdrain(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct gem_rxsoft *rxs;
|
|
int i;
|
|
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
rxs = &sc->sc_rxsoft[i];
|
|
if (rxs->rxs_mbuf != NULL) {
|
|
bus_dmamap_sync(sc->sc_rdmatag, rxs->rxs_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->sc_rdmatag, rxs->rxs_dmamap);
|
|
m_freem(rxs->rxs_mbuf);
|
|
rxs->rxs_mbuf = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Reset the whole thing.
|
|
*/
|
|
static void
|
|
gem_stop(ifp, disable)
|
|
struct ifnet *ifp;
|
|
int disable;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)ifp->if_softc;
|
|
struct gem_txsoft *txs;
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR1(KTR_GEM, "%s: gem_stop", device_get_name(sc->sc_dev));
|
|
#endif
|
|
|
|
callout_stop(&sc->sc_tick_ch);
|
|
#ifdef GEM_RINT_TIMEOUT
|
|
callout_stop(&sc->sc_rx_ch);
|
|
#endif
|
|
|
|
/* XXX - Should we reset these instead? */
|
|
gem_disable_tx(sc);
|
|
gem_disable_rx(sc);
|
|
|
|
/*
|
|
* Release any queued transmit buffers.
|
|
*/
|
|
while ((txs = STAILQ_FIRST(&sc->sc_txdirtyq)) != NULL) {
|
|
STAILQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q);
|
|
if (txs->txs_ndescs != 0) {
|
|
bus_dmamap_sync(sc->sc_tdmatag, txs->txs_dmamap,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_tdmatag, txs->txs_dmamap);
|
|
if (txs->txs_mbuf != NULL) {
|
|
m_freem(txs->txs_mbuf);
|
|
txs->txs_mbuf = NULL;
|
|
}
|
|
}
|
|
STAILQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
}
|
|
|
|
if (disable)
|
|
gem_rxdrain(sc);
|
|
|
|
/*
|
|
* Mark the interface down and cancel the watchdog timer.
|
|
*/
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
ifp->if_timer = 0;
|
|
}
|
|
|
|
/*
|
|
* Reset the receiver
|
|
*/
|
|
int
|
|
gem_reset_rx(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
|
|
/*
|
|
* Resetting while DMA is in progress can cause a bus hang, so we
|
|
* disable DMA first.
|
|
*/
|
|
gem_disable_rx(sc);
|
|
bus_space_write_4(t, h, GEM_RX_CONFIG, 0);
|
|
/* Wait till it finishes */
|
|
if (!gem_bitwait(sc, GEM_RX_CONFIG, 1, 0))
|
|
device_printf(sc->sc_dev, "cannot disable read dma\n");
|
|
|
|
/* Wait 5ms extra. */
|
|
DELAY(5000);
|
|
|
|
/* Finally, reset the ERX */
|
|
bus_space_write_4(t, h, GEM_RESET, GEM_RESET_RX);
|
|
/* Wait till it finishes */
|
|
if (!gem_bitwait(sc, GEM_RESET, GEM_RESET_TX, 0)) {
|
|
device_printf(sc->sc_dev, "cannot reset receiver\n");
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Reset the transmitter
|
|
*/
|
|
static int
|
|
gem_reset_tx(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
int i;
|
|
|
|
/*
|
|
* Resetting while DMA is in progress can cause a bus hang, so we
|
|
* disable DMA first.
|
|
*/
|
|
gem_disable_tx(sc);
|
|
bus_space_write_4(t, h, GEM_TX_CONFIG, 0);
|
|
/* Wait till it finishes */
|
|
if (!gem_bitwait(sc, GEM_TX_CONFIG, 1, 0))
|
|
device_printf(sc->sc_dev, "cannot disable read dma\n");
|
|
|
|
/* Wait 5ms extra. */
|
|
DELAY(5000);
|
|
|
|
/* Finally, reset the ETX */
|
|
bus_space_write_4(t, h, GEM_RESET, GEM_RESET_TX);
|
|
/* Wait till it finishes */
|
|
for (i = TRIES; i--; DELAY(100))
|
|
if ((bus_space_read_4(t, h, GEM_RESET) & GEM_RESET_TX) == 0)
|
|
break;
|
|
if (!gem_bitwait(sc, GEM_RESET, GEM_RESET_TX, 0)) {
|
|
device_printf(sc->sc_dev, "cannot reset receiver\n");
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* disable receiver.
|
|
*/
|
|
static int
|
|
gem_disable_rx(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
u_int32_t cfg;
|
|
|
|
/* Flip the enable bit */
|
|
cfg = bus_space_read_4(t, h, GEM_MAC_RX_CONFIG);
|
|
cfg &= ~GEM_MAC_RX_ENABLE;
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CONFIG, cfg);
|
|
|
|
/* Wait for it to finish */
|
|
return (gem_bitwait(sc, GEM_MAC_RX_CONFIG, GEM_MAC_RX_ENABLE, 0));
|
|
}
|
|
|
|
/*
|
|
* disable transmitter.
|
|
*/
|
|
static int
|
|
gem_disable_tx(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
u_int32_t cfg;
|
|
|
|
/* Flip the enable bit */
|
|
cfg = bus_space_read_4(t, h, GEM_MAC_TX_CONFIG);
|
|
cfg &= ~GEM_MAC_TX_ENABLE;
|
|
bus_space_write_4(t, h, GEM_MAC_TX_CONFIG, cfg);
|
|
|
|
/* Wait for it to finish */
|
|
return (gem_bitwait(sc, GEM_MAC_TX_CONFIG, GEM_MAC_TX_ENABLE, 0));
|
|
}
|
|
|
|
/*
|
|
* Initialize interface.
|
|
*/
|
|
static int
|
|
gem_meminit(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct gem_rxsoft *rxs;
|
|
int i, error;
|
|
|
|
/*
|
|
* Initialize the transmit descriptor ring.
|
|
*/
|
|
for (i = 0; i < GEM_NTXDESC; i++) {
|
|
sc->sc_txdescs[i].gd_flags = 0;
|
|
sc->sc_txdescs[i].gd_addr = 0;
|
|
}
|
|
sc->sc_txfree = GEM_MAXTXFREE;
|
|
sc->sc_txnext = 0;
|
|
sc->sc_txwin = 0;
|
|
|
|
/*
|
|
* Initialize the receive descriptor and receive job
|
|
* descriptor rings.
|
|
*/
|
|
for (i = 0; i < GEM_NRXDESC; i++) {
|
|
rxs = &sc->sc_rxsoft[i];
|
|
if (rxs->rxs_mbuf == NULL) {
|
|
if ((error = gem_add_rxbuf(sc, i)) != 0) {
|
|
device_printf(sc->sc_dev, "unable to "
|
|
"allocate or map rx buffer %d, error = "
|
|
"%d\n", i, error);
|
|
/*
|
|
* XXX Should attempt to run with fewer receive
|
|
* XXX buffers instead of just failing.
|
|
*/
|
|
gem_rxdrain(sc);
|
|
return (1);
|
|
}
|
|
} else
|
|
GEM_INIT_RXDESC(sc, i);
|
|
}
|
|
sc->sc_rxptr = 0;
|
|
GEM_CDSYNC(sc, BUS_DMASYNC_PREWRITE);
|
|
GEM_CDSYNC(sc, BUS_DMASYNC_PREREAD);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
gem_ringsize(sz)
|
|
int sz;
|
|
{
|
|
int v = 0;
|
|
|
|
switch (sz) {
|
|
case 32:
|
|
v = GEM_RING_SZ_32;
|
|
break;
|
|
case 64:
|
|
v = GEM_RING_SZ_64;
|
|
break;
|
|
case 128:
|
|
v = GEM_RING_SZ_128;
|
|
break;
|
|
case 256:
|
|
v = GEM_RING_SZ_256;
|
|
break;
|
|
case 512:
|
|
v = GEM_RING_SZ_512;
|
|
break;
|
|
case 1024:
|
|
v = GEM_RING_SZ_1024;
|
|
break;
|
|
case 2048:
|
|
v = GEM_RING_SZ_2048;
|
|
break;
|
|
case 4096:
|
|
v = GEM_RING_SZ_4096;
|
|
break;
|
|
case 8192:
|
|
v = GEM_RING_SZ_8192;
|
|
break;
|
|
default:
|
|
printf("gem: invalid Receive Descriptor ring size\n");
|
|
break;
|
|
}
|
|
return (v);
|
|
}
|
|
|
|
static void
|
|
gem_init(xsc)
|
|
void *xsc;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)xsc;
|
|
|
|
GEM_LOCK(sc);
|
|
gem_init_locked(sc);
|
|
GEM_UNLOCK(sc);
|
|
}
|
|
|
|
/*
|
|
* Initialization of interface; set up initialization block
|
|
* and transmit/receive descriptor rings.
|
|
*/
|
|
static void
|
|
gem_init_locked(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
u_int32_t v;
|
|
|
|
GEM_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR1(KTR_GEM, "%s: gem_init: calling stop", device_get_name(sc->sc_dev));
|
|
#endif
|
|
/*
|
|
* Initialization sequence. The numbered steps below correspond
|
|
* to the sequence outlined in section 6.3.5.1 in the Ethernet
|
|
* Channel Engine manual (part of the PCIO manual).
|
|
* See also the STP2002-STQ document from Sun Microsystems.
|
|
*/
|
|
|
|
/* step 1 & 2. Reset the Ethernet Channel */
|
|
gem_stop(sc->sc_ifp, 0);
|
|
gem_reset(sc);
|
|
#ifdef GEM_DEBUG
|
|
CTR1(KTR_GEM, "%s: gem_init: restarting", device_get_name(sc->sc_dev));
|
|
#endif
|
|
|
|
/* Re-initialize the MIF */
|
|
gem_mifinit(sc);
|
|
|
|
/* step 3. Setup data structures in host memory */
|
|
gem_meminit(sc);
|
|
|
|
/* step 4. TX MAC registers & counters */
|
|
gem_init_regs(sc);
|
|
|
|
/* step 5. RX MAC registers & counters */
|
|
gem_setladrf(sc);
|
|
|
|
/* step 6 & 7. Program Descriptor Ring Base Addresses */
|
|
/* NOTE: we use only 32-bit DMA addresses here. */
|
|
bus_space_write_4(t, h, GEM_TX_RING_PTR_HI, 0);
|
|
bus_space_write_4(t, h, GEM_TX_RING_PTR_LO, GEM_CDTXADDR(sc, 0));
|
|
|
|
bus_space_write_4(t, h, GEM_RX_RING_PTR_HI, 0);
|
|
bus_space_write_4(t, h, GEM_RX_RING_PTR_LO, GEM_CDRXADDR(sc, 0));
|
|
#ifdef GEM_DEBUG
|
|
CTR3(KTR_GEM, "loading rx ring %lx, tx ring %lx, cddma %lx",
|
|
GEM_CDRXADDR(sc, 0), GEM_CDTXADDR(sc, 0), sc->sc_cddma);
|
|
#endif
|
|
|
|
/* step 8. Global Configuration & Interrupt Mask */
|
|
bus_space_write_4(t, h, GEM_INTMASK,
|
|
~(GEM_INTR_TX_INTME|
|
|
GEM_INTR_TX_EMPTY|
|
|
GEM_INTR_RX_DONE|GEM_INTR_RX_NOBUF|
|
|
GEM_INTR_RX_TAG_ERR|GEM_INTR_PCS|
|
|
GEM_INTR_MAC_CONTROL|GEM_INTR_MIF|
|
|
GEM_INTR_BERR));
|
|
bus_space_write_4(t, h, GEM_MAC_RX_MASK,
|
|
GEM_MAC_RX_DONE|GEM_MAC_RX_FRAME_CNT);
|
|
bus_space_write_4(t, h, GEM_MAC_TX_MASK, 0xffff); /* XXXX */
|
|
bus_space_write_4(t, h, GEM_MAC_CONTROL_MASK, 0); /* XXXX */
|
|
|
|
/* step 9. ETX Configuration: use mostly default values */
|
|
|
|
/* Enable DMA */
|
|
v = gem_ringsize(GEM_NTXDESC /*XXX*/);
|
|
bus_space_write_4(t, h, GEM_TX_CONFIG,
|
|
v|GEM_TX_CONFIG_TXDMA_EN|
|
|
((0x400<<10)&GEM_TX_CONFIG_TXFIFO_TH));
|
|
|
|
/* step 10. ERX Configuration */
|
|
|
|
/* Encode Receive Descriptor ring size: four possible values */
|
|
v = gem_ringsize(GEM_NRXDESC /*XXX*/);
|
|
|
|
/* Enable DMA */
|
|
bus_space_write_4(t, h, GEM_RX_CONFIG,
|
|
v|(GEM_THRSH_1024<<GEM_RX_CONFIG_FIFO_THRS_SHIFT)|
|
|
(2<<GEM_RX_CONFIG_FBOFF_SHFT)|GEM_RX_CONFIG_RXDMA_EN|
|
|
(0<<GEM_RX_CONFIG_CXM_START_SHFT));
|
|
/*
|
|
* The following value is for an OFF Threshold of about 3/4 full
|
|
* and an ON Threshold of 1/4 full.
|
|
*/
|
|
bus_space_write_4(t, h, GEM_RX_PAUSE_THRESH,
|
|
(3 * sc->sc_rxfifosize / 256) |
|
|
( (sc->sc_rxfifosize / 256) << 12));
|
|
bus_space_write_4(t, h, GEM_RX_BLANKING, (6<<12)|6);
|
|
|
|
/* step 11. Configure Media */
|
|
mii_mediachg(sc->sc_mii);
|
|
|
|
/* step 12. RX_MAC Configuration Register */
|
|
v = bus_space_read_4(t, h, GEM_MAC_RX_CONFIG);
|
|
v |= GEM_MAC_RX_ENABLE;
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CONFIG, v);
|
|
|
|
/* step 14. Issue Transmit Pending command */
|
|
|
|
/* step 15. Give the reciever a swift kick */
|
|
bus_space_write_4(t, h, GEM_RX_KICK, GEM_NRXDESC-4);
|
|
|
|
/* Start the one second timer. */
|
|
callout_reset(&sc->sc_tick_ch, hz, gem_tick, sc);
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
ifp->if_timer = 0;
|
|
sc->sc_ifflags = ifp->if_flags;
|
|
}
|
|
|
|
static int
|
|
gem_load_txmbuf(sc, m0)
|
|
struct gem_softc *sc;
|
|
struct mbuf *m0;
|
|
{
|
|
struct gem_txdma txd;
|
|
struct gem_txsoft *txs;
|
|
int error;
|
|
|
|
/* Get a work queue entry. */
|
|
if ((txs = STAILQ_FIRST(&sc->sc_txfreeq)) == NULL) {
|
|
/* Ran out of descriptors. */
|
|
return (-1);
|
|
}
|
|
txd.txd_sc = sc;
|
|
txd.txd_txs = txs;
|
|
txs->txs_firstdesc = sc->sc_txnext;
|
|
error = bus_dmamap_load_mbuf(sc->sc_tdmatag, txs->txs_dmamap, m0,
|
|
gem_txdma_callback, &txd, BUS_DMA_NOWAIT);
|
|
if (error != 0)
|
|
goto fail;
|
|
if (txs->txs_ndescs == -1) {
|
|
error = -1;
|
|
goto fail;
|
|
}
|
|
|
|
/* Sync the DMA map. */
|
|
bus_dmamap_sync(sc->sc_tdmatag, txs->txs_dmamap,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR3(KTR_GEM, "load_mbuf: setting firstdesc=%d, lastdesc=%d, "
|
|
"ndescs=%d", txs->txs_firstdesc, txs->txs_lastdesc,
|
|
txs->txs_ndescs);
|
|
#endif
|
|
STAILQ_REMOVE_HEAD(&sc->sc_txfreeq, txs_q);
|
|
STAILQ_INSERT_TAIL(&sc->sc_txdirtyq, txs, txs_q);
|
|
txs->txs_mbuf = m0;
|
|
|
|
sc->sc_txnext = GEM_NEXTTX(txs->txs_lastdesc);
|
|
sc->sc_txfree -= txs->txs_ndescs;
|
|
return (0);
|
|
|
|
fail:
|
|
#ifdef GEM_DEBUG
|
|
CTR1(KTR_GEM, "gem_load_txmbuf failed (%d)", error);
|
|
#endif
|
|
bus_dmamap_unload(sc->sc_tdmatag, txs->txs_dmamap);
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
gem_init_regs(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
const u_char *laddr = IFP2ENADDR(sc->sc_ifp);
|
|
u_int32_t v;
|
|
|
|
/* These regs are not cleared on reset */
|
|
if (!sc->sc_inited) {
|
|
|
|
/* Wooo. Magic values. */
|
|
bus_space_write_4(t, h, GEM_MAC_IPG0, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_IPG1, 8);
|
|
bus_space_write_4(t, h, GEM_MAC_IPG2, 4);
|
|
|
|
bus_space_write_4(t, h, GEM_MAC_MAC_MIN_FRAME, ETHER_MIN_LEN);
|
|
/* Max frame and max burst size */
|
|
bus_space_write_4(t, h, GEM_MAC_MAC_MAX_FRAME,
|
|
(ETHER_MAX_LEN + ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN) |
|
|
(0x2000 << 16));
|
|
|
|
bus_space_write_4(t, h, GEM_MAC_PREAMBLE_LEN, 0x7);
|
|
bus_space_write_4(t, h, GEM_MAC_JAM_SIZE, 0x4);
|
|
bus_space_write_4(t, h, GEM_MAC_ATTEMPT_LIMIT, 0x10);
|
|
/* Dunno.... */
|
|
bus_space_write_4(t, h, GEM_MAC_CONTROL_TYPE, 0x8088);
|
|
bus_space_write_4(t, h, GEM_MAC_RANDOM_SEED,
|
|
((laddr[5]<<8)|laddr[4])&0x3ff);
|
|
|
|
/* Secondary MAC addr set to 0:0:0:0:0:0 */
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR3, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR4, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR5, 0);
|
|
|
|
/* MAC control addr set to 01:80:c2:00:00:01 */
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR6, 0x0001);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR7, 0xc200);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR8, 0x0180);
|
|
|
|
/* MAC filter addr set to 0:0:0:0:0:0 */
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR_FILTER0, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR_FILTER1, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR_FILTER2, 0);
|
|
|
|
bus_space_write_4(t, h, GEM_MAC_ADR_FLT_MASK1_2, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_ADR_FLT_MASK0, 0);
|
|
|
|
sc->sc_inited = 1;
|
|
}
|
|
|
|
/* Counters need to be zeroed */
|
|
bus_space_write_4(t, h, GEM_MAC_NORM_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_FIRST_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_EXCESS_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_LATE_COLL_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_DEFER_TMR_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_PEAK_ATTEMPTS, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_FRAME_COUNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_LEN_ERR_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_ALIGN_ERR, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CRC_ERR_CNT, 0);
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CODE_VIOL, 0);
|
|
|
|
/* Un-pause stuff */
|
|
#if 0
|
|
bus_space_write_4(t, h, GEM_MAC_SEND_PAUSE_CMD, 0x1BF0);
|
|
#else
|
|
bus_space_write_4(t, h, GEM_MAC_SEND_PAUSE_CMD, 0);
|
|
#endif
|
|
|
|
/*
|
|
* Set the station address.
|
|
*/
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR0, (laddr[4]<<8)|laddr[5]);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR1, (laddr[2]<<8)|laddr[3]);
|
|
bus_space_write_4(t, h, GEM_MAC_ADDR2, (laddr[0]<<8)|laddr[1]);
|
|
|
|
/*
|
|
* Enable MII outputs. Enable GMII if there is a gigabit PHY.
|
|
*/
|
|
sc->sc_mif_config = bus_space_read_4(t, h, GEM_MIF_CONFIG);
|
|
v = GEM_MAC_XIF_TX_MII_ENA;
|
|
if (sc->sc_mif_config & GEM_MIF_CONFIG_MDI1) {
|
|
v |= GEM_MAC_XIF_FDPLX_LED;
|
|
if (sc->sc_flags & GEM_GIGABIT)
|
|
v |= GEM_MAC_XIF_GMII_MODE;
|
|
}
|
|
bus_space_write_4(t, h, GEM_MAC_XIF_CONFIG, v);
|
|
}
|
|
|
|
static void
|
|
gem_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)ifp->if_softc;
|
|
|
|
GEM_LOCK(sc);
|
|
gem_start_locked(ifp);
|
|
GEM_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
gem_start_locked(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)ifp->if_softc;
|
|
struct mbuf *m0 = NULL;
|
|
int firsttx, ntx = 0, ofree, txmfail;
|
|
|
|
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING)
|
|
return;
|
|
|
|
/*
|
|
* Remember the previous number of free descriptors and
|
|
* the first descriptor we'll use.
|
|
*/
|
|
ofree = sc->sc_txfree;
|
|
firsttx = sc->sc_txnext;
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR3(KTR_GEM, "%s: gem_start: txfree %d, txnext %d",
|
|
device_get_name(sc->sc_dev), ofree, firsttx);
|
|
#endif
|
|
|
|
/*
|
|
* Loop through the send queue, setting up transmit descriptors
|
|
* until we drain the queue, or use up all available transmit
|
|
* descriptors.
|
|
*/
|
|
txmfail = 0;
|
|
do {
|
|
/*
|
|
* Grab a packet off the queue.
|
|
*/
|
|
IF_DEQUEUE(&ifp->if_snd, m0);
|
|
if (m0 == NULL)
|
|
break;
|
|
|
|
txmfail = gem_load_txmbuf(sc, m0);
|
|
if (txmfail > 0) {
|
|
/* Drop the mbuf and complain. */
|
|
printf("gem_start: error %d while loading mbuf dma "
|
|
"map\n", txmfail);
|
|
continue;
|
|
}
|
|
/* Not enough descriptors. */
|
|
if (txmfail == -1) {
|
|
if (sc->sc_txfree == GEM_MAXTXFREE)
|
|
panic("gem_start: mbuf chain too long!");
|
|
IF_PREPEND(&ifp->if_snd, m0);
|
|
break;
|
|
}
|
|
|
|
ntx++;
|
|
/* Kick the transmitter. */
|
|
#ifdef GEM_DEBUG
|
|
CTR2(KTR_GEM, "%s: gem_start: kicking tx %d",
|
|
device_get_name(sc->sc_dev), sc->sc_txnext);
|
|
#endif
|
|
bus_space_write_4(sc->sc_bustag, sc->sc_h, GEM_TX_KICK,
|
|
sc->sc_txnext);
|
|
|
|
if (ifp->if_bpf != NULL)
|
|
bpf_mtap(ifp->if_bpf, m0);
|
|
} while (1);
|
|
|
|
if (txmfail == -1 || sc->sc_txfree == 0) {
|
|
/* No more slots left; notify upper layer. */
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
}
|
|
|
|
if (ntx > 0) {
|
|
GEM_CDSYNC(sc, BUS_DMASYNC_PREWRITE);
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR2(KTR_GEM, "%s: packets enqueued, OWN on %d",
|
|
device_get_name(sc->sc_dev), firsttx);
|
|
#endif
|
|
|
|
/* Set a watchdog timer in case the chip flakes out. */
|
|
ifp->if_timer = 5;
|
|
#ifdef GEM_DEBUG
|
|
CTR2(KTR_GEM, "%s: gem_start: watchdog %d",
|
|
device_get_name(sc->sc_dev), ifp->if_timer);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Transmit interrupt.
|
|
*/
|
|
static void
|
|
gem_tint(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mac = sc->sc_h;
|
|
struct gem_txsoft *txs;
|
|
int txlast;
|
|
int progress = 0;
|
|
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR1(KTR_GEM, "%s: gem_tint", device_get_name(sc->sc_dev));
|
|
#endif
|
|
|
|
/*
|
|
* Unload collision counters
|
|
*/
|
|
ifp->if_collisions +=
|
|
bus_space_read_4(t, mac, GEM_MAC_NORM_COLL_CNT) +
|
|
bus_space_read_4(t, mac, GEM_MAC_FIRST_COLL_CNT) +
|
|
bus_space_read_4(t, mac, GEM_MAC_EXCESS_COLL_CNT) +
|
|
bus_space_read_4(t, mac, GEM_MAC_LATE_COLL_CNT);
|
|
|
|
/*
|
|
* then clear the hardware counters.
|
|
*/
|
|
bus_space_write_4(t, mac, GEM_MAC_NORM_COLL_CNT, 0);
|
|
bus_space_write_4(t, mac, GEM_MAC_FIRST_COLL_CNT, 0);
|
|
bus_space_write_4(t, mac, GEM_MAC_EXCESS_COLL_CNT, 0);
|
|
bus_space_write_4(t, mac, GEM_MAC_LATE_COLL_CNT, 0);
|
|
|
|
/*
|
|
* Go through our Tx list and free mbufs for those
|
|
* frames that have been transmitted.
|
|
*/
|
|
GEM_CDSYNC(sc, BUS_DMASYNC_POSTREAD);
|
|
while ((txs = STAILQ_FIRST(&sc->sc_txdirtyq)) != NULL) {
|
|
|
|
#ifdef GEM_DEBUG
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
int i;
|
|
printf(" txsoft %p transmit chain:\n", txs);
|
|
for (i = txs->txs_firstdesc;; i = GEM_NEXTTX(i)) {
|
|
printf("descriptor %d: ", i);
|
|
printf("gd_flags: 0x%016llx\t", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_txdescs[i].gd_flags));
|
|
printf("gd_addr: 0x%016llx\n", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_txdescs[i].gd_addr));
|
|
if (i == txs->txs_lastdesc)
|
|
break;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* In theory, we could harveast some descriptors before
|
|
* the ring is empty, but that's a bit complicated.
|
|
*
|
|
* GEM_TX_COMPLETION points to the last descriptor
|
|
* processed +1.
|
|
*/
|
|
txlast = bus_space_read_4(t, mac, GEM_TX_COMPLETION);
|
|
#ifdef GEM_DEBUG
|
|
CTR3(KTR_GEM, "gem_tint: txs->txs_firstdesc = %d, "
|
|
"txs->txs_lastdesc = %d, txlast = %d",
|
|
txs->txs_firstdesc, txs->txs_lastdesc, txlast);
|
|
#endif
|
|
if (txs->txs_firstdesc <= txs->txs_lastdesc) {
|
|
if ((txlast >= txs->txs_firstdesc) &&
|
|
(txlast <= txs->txs_lastdesc))
|
|
break;
|
|
} else {
|
|
/* Ick -- this command wraps */
|
|
if ((txlast >= txs->txs_firstdesc) ||
|
|
(txlast <= txs->txs_lastdesc))
|
|
break;
|
|
}
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR0(KTR_GEM, "gem_tint: releasing a desc");
|
|
#endif
|
|
STAILQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q);
|
|
|
|
sc->sc_txfree += txs->txs_ndescs;
|
|
|
|
bus_dmamap_sync(sc->sc_tdmatag, txs->txs_dmamap,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->sc_tdmatag, txs->txs_dmamap);
|
|
if (txs->txs_mbuf != NULL) {
|
|
m_freem(txs->txs_mbuf);
|
|
txs->txs_mbuf = NULL;
|
|
}
|
|
|
|
STAILQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q);
|
|
|
|
ifp->if_opackets++;
|
|
progress = 1;
|
|
}
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR3(KTR_GEM, "gem_tint: GEM_TX_STATE_MACHINE %x "
|
|
"GEM_TX_DATA_PTR %llx "
|
|
"GEM_TX_COMPLETION %x",
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_STATE_MACHINE),
|
|
((long long) bus_space_read_4(sc->sc_bustag, sc->sc_h,
|
|
GEM_TX_DATA_PTR_HI) << 32) |
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h,
|
|
GEM_TX_DATA_PTR_LO),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_COMPLETION));
|
|
#endif
|
|
|
|
if (progress) {
|
|
if (sc->sc_txfree == GEM_NTXDESC - 1)
|
|
sc->sc_txwin = 0;
|
|
|
|
/* Freed some descriptors, so reset IFF_DRV_OACTIVE and restart. */
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
gem_start_locked(ifp);
|
|
|
|
if (STAILQ_EMPTY(&sc->sc_txdirtyq))
|
|
ifp->if_timer = 0;
|
|
}
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR2(KTR_GEM, "%s: gem_tint: watchdog %d",
|
|
device_get_name(sc->sc_dev), ifp->if_timer);
|
|
#endif
|
|
}
|
|
|
|
#ifdef GEM_RINT_TIMEOUT
|
|
static void
|
|
gem_rint_timeout(arg)
|
|
void *arg;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)arg;
|
|
|
|
GEM_LOCK_ASSERT(sc, MA_OWNED);
|
|
gem_rint(sc);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Receive interrupt.
|
|
*/
|
|
static void
|
|
gem_rint(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
struct gem_rxsoft *rxs;
|
|
struct mbuf *m;
|
|
u_int64_t rxstat;
|
|
u_int32_t rxcomp;
|
|
int i, len, progress = 0;
|
|
|
|
#ifdef GEM_RINT_TIMEOUT
|
|
callout_stop(&sc->sc_rx_ch);
|
|
#endif
|
|
#ifdef GEM_DEBUG
|
|
CTR1(KTR_GEM, "%s: gem_rint", device_get_name(sc->sc_dev));
|
|
#endif
|
|
|
|
/*
|
|
* Read the completion register once. This limits
|
|
* how long the following loop can execute.
|
|
*/
|
|
rxcomp = bus_space_read_4(t, h, GEM_RX_COMPLETION);
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR2(KTR_GEM, "gem_rint: sc->rxptr %d, complete %d",
|
|
sc->sc_rxptr, rxcomp);
|
|
#endif
|
|
GEM_CDSYNC(sc, BUS_DMASYNC_POSTREAD);
|
|
for (i = sc->sc_rxptr; i != rxcomp;
|
|
i = GEM_NEXTRX(i)) {
|
|
rxs = &sc->sc_rxsoft[i];
|
|
|
|
rxstat = GEM_DMA_READ(sc, sc->sc_rxdescs[i].gd_flags);
|
|
|
|
if (rxstat & GEM_RD_OWN) {
|
|
#ifdef GEM_RINT_TIMEOUT
|
|
/*
|
|
* The descriptor is still marked as owned, although
|
|
* it is supposed to have completed. This has been
|
|
* observed on some machines. Just exiting here
|
|
* might leave the packet sitting around until another
|
|
* one arrives to trigger a new interrupt, which is
|
|
* generally undesirable, so set up a timeout.
|
|
*/
|
|
callout_reset(&sc->sc_rx_ch, GEM_RXOWN_TICKS,
|
|
gem_rint_timeout, sc);
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
progress++;
|
|
ifp->if_ipackets++;
|
|
|
|
if (rxstat & GEM_RD_BAD_CRC) {
|
|
ifp->if_ierrors++;
|
|
device_printf(sc->sc_dev, "receive error: CRC error\n");
|
|
GEM_INIT_RXDESC(sc, i);
|
|
continue;
|
|
}
|
|
|
|
#ifdef GEM_DEBUG
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
printf(" rxsoft %p descriptor %d: ", rxs, i);
|
|
printf("gd_flags: 0x%016llx\t", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_rxdescs[i].gd_flags));
|
|
printf("gd_addr: 0x%016llx\n", (long long)
|
|
GEM_DMA_READ(sc, sc->sc_rxdescs[i].gd_addr));
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* No errors; receive the packet. Note the Gem
|
|
* includes the CRC with every packet.
|
|
*/
|
|
len = GEM_RD_BUFLEN(rxstat);
|
|
|
|
/*
|
|
* Allocate a new mbuf cluster. If that fails, we are
|
|
* out of memory, and must drop the packet and recycle
|
|
* the buffer that's already attached to this descriptor.
|
|
*/
|
|
m = rxs->rxs_mbuf;
|
|
if (gem_add_rxbuf(sc, i) != 0) {
|
|
ifp->if_ierrors++;
|
|
GEM_INIT_RXDESC(sc, i);
|
|
continue;
|
|
}
|
|
m->m_data += 2; /* We're already off by two */
|
|
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = m->m_len = len - ETHER_CRC_LEN;
|
|
|
|
/* Pass it on. */
|
|
GEM_UNLOCK(sc);
|
|
(*ifp->if_input)(ifp, m);
|
|
GEM_LOCK(sc);
|
|
}
|
|
|
|
if (progress) {
|
|
GEM_CDSYNC(sc, BUS_DMASYNC_PREWRITE);
|
|
/* Update the receive pointer. */
|
|
if (i == sc->sc_rxptr) {
|
|
device_printf(sc->sc_dev, "rint: ring wrap\n");
|
|
}
|
|
sc->sc_rxptr = i;
|
|
bus_space_write_4(t, h, GEM_RX_KICK, GEM_PREVRX(i));
|
|
}
|
|
|
|
#ifdef GEM_DEBUG
|
|
CTR2(KTR_GEM, "gem_rint: done sc->rxptr %d, complete %d",
|
|
sc->sc_rxptr, bus_space_read_4(t, h, GEM_RX_COMPLETION));
|
|
#endif
|
|
}
|
|
|
|
|
|
/*
|
|
* gem_add_rxbuf:
|
|
*
|
|
* Add a receive buffer to the indicated descriptor.
|
|
*/
|
|
static int
|
|
gem_add_rxbuf(sc, idx)
|
|
struct gem_softc *sc;
|
|
int idx;
|
|
{
|
|
struct gem_rxsoft *rxs = &sc->sc_rxsoft[idx];
|
|
struct mbuf *m;
|
|
bus_dma_segment_t segs[1];
|
|
int error, nsegs;
|
|
|
|
m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
m->m_len = m->m_pkthdr.len = m->m_ext.ext_size;
|
|
|
|
#ifdef GEM_DEBUG
|
|
/* bzero the packet to check dma */
|
|
memset(m->m_ext.ext_buf, 0, m->m_ext.ext_size);
|
|
#endif
|
|
|
|
if (rxs->rxs_mbuf != NULL) {
|
|
bus_dmamap_sync(sc->sc_rdmatag, rxs->rxs_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->sc_rdmatag, rxs->rxs_dmamap);
|
|
}
|
|
|
|
rxs->rxs_mbuf = m;
|
|
|
|
error = bus_dmamap_load_mbuf_sg(sc->sc_rdmatag, rxs->rxs_dmamap,
|
|
m, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
/* If nsegs is wrong then the stack is corrupt. */
|
|
KASSERT(nsegs == 1, ("Too many segments returned!"));
|
|
if (error != 0) {
|
|
device_printf(sc->sc_dev, "can't load rx DMA map %d, error = "
|
|
"%d\n", idx, error);
|
|
m_freem(m);
|
|
return (ENOBUFS);
|
|
}
|
|
rxs->rxs_paddr = segs[0].ds_addr;
|
|
|
|
bus_dmamap_sync(sc->sc_rdmatag, rxs->rxs_dmamap, BUS_DMASYNC_PREREAD);
|
|
|
|
GEM_INIT_RXDESC(sc, idx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
static void
|
|
gem_eint(sc, status)
|
|
struct gem_softc *sc;
|
|
u_int status;
|
|
{
|
|
|
|
if ((status & GEM_INTR_MIF) != 0) {
|
|
device_printf(sc->sc_dev, "XXXlink status changed\n");
|
|
return;
|
|
}
|
|
|
|
device_printf(sc->sc_dev, "status=%x\n", status);
|
|
}
|
|
|
|
|
|
void
|
|
gem_intr(v)
|
|
void *v;
|
|
{
|
|
struct gem_softc *sc = (struct gem_softc *)v;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t seb = sc->sc_h;
|
|
u_int32_t status;
|
|
|
|
GEM_LOCK(sc);
|
|
status = bus_space_read_4(t, seb, GEM_STATUS);
|
|
#ifdef GEM_DEBUG
|
|
CTR3(KTR_GEM, "%s: gem_intr: cplt %x, status %x",
|
|
device_get_name(sc->sc_dev), (status>>19),
|
|
(u_int)status);
|
|
#endif
|
|
|
|
if ((status & (GEM_INTR_RX_TAG_ERR | GEM_INTR_BERR)) != 0)
|
|
gem_eint(sc, status);
|
|
|
|
if ((status & (GEM_INTR_TX_EMPTY | GEM_INTR_TX_INTME)) != 0)
|
|
gem_tint(sc);
|
|
|
|
if ((status & (GEM_INTR_RX_DONE | GEM_INTR_RX_NOBUF)) != 0)
|
|
gem_rint(sc);
|
|
|
|
/* We should eventually do more than just print out error stats. */
|
|
if (status & GEM_INTR_TX_MAC) {
|
|
int txstat = bus_space_read_4(t, seb, GEM_MAC_TX_STATUS);
|
|
if (txstat & ~GEM_MAC_TX_XMIT_DONE)
|
|
device_printf(sc->sc_dev, "MAC tx fault, status %x\n",
|
|
txstat);
|
|
if (txstat & (GEM_MAC_TX_UNDERRUN | GEM_MAC_TX_PKT_TOO_LONG))
|
|
gem_init_locked(sc);
|
|
}
|
|
if (status & GEM_INTR_RX_MAC) {
|
|
int rxstat = bus_space_read_4(t, seb, GEM_MAC_RX_STATUS);
|
|
/*
|
|
* On some chip revisions GEM_MAC_RX_OVERFLOW happen often
|
|
* due to a silicon bug so handle them silently.
|
|
*/
|
|
if (rxstat & GEM_MAC_RX_OVERFLOW)
|
|
gem_init_locked(sc);
|
|
else if (rxstat & ~(GEM_MAC_RX_DONE | GEM_MAC_RX_FRAME_CNT))
|
|
device_printf(sc->sc_dev, "MAC rx fault, status %x\n",
|
|
rxstat);
|
|
}
|
|
GEM_UNLOCK(sc);
|
|
}
|
|
|
|
|
|
static void
|
|
gem_watchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
|
|
GEM_LOCK(sc);
|
|
#ifdef GEM_DEBUG
|
|
CTR3(KTR_GEM, "gem_watchdog: GEM_RX_CONFIG %x GEM_MAC_RX_STATUS %x "
|
|
"GEM_MAC_RX_CONFIG %x",
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_RX_CONFIG),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_RX_STATUS),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_RX_CONFIG));
|
|
CTR3(KTR_GEM, "gem_watchdog: GEM_TX_CONFIG %x GEM_MAC_TX_STATUS %x "
|
|
"GEM_MAC_TX_CONFIG %x",
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_TX_CONFIG),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_TX_STATUS),
|
|
bus_space_read_4(sc->sc_bustag, sc->sc_h, GEM_MAC_TX_CONFIG));
|
|
#endif
|
|
|
|
device_printf(sc->sc_dev, "device timeout\n");
|
|
++ifp->if_oerrors;
|
|
|
|
/* Try to get more packets going. */
|
|
gem_init_locked(sc);
|
|
GEM_UNLOCK(sc);
|
|
}
|
|
|
|
/*
|
|
* Initialize the MII Management Interface
|
|
*/
|
|
static void
|
|
gem_mifinit(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mif = sc->sc_h;
|
|
|
|
/* Configure the MIF in frame mode */
|
|
sc->sc_mif_config = bus_space_read_4(t, mif, GEM_MIF_CONFIG);
|
|
sc->sc_mif_config &= ~GEM_MIF_CONFIG_BB_ENA;
|
|
bus_space_write_4(t, mif, GEM_MIF_CONFIG, sc->sc_mif_config);
|
|
}
|
|
|
|
/*
|
|
* MII interface
|
|
*
|
|
* The GEM MII interface supports at least three different operating modes:
|
|
*
|
|
* Bitbang mode is implemented using data, clock and output enable registers.
|
|
*
|
|
* Frame mode is implemented by loading a complete frame into the frame
|
|
* register and polling the valid bit for completion.
|
|
*
|
|
* Polling mode uses the frame register but completion is indicated by
|
|
* an interrupt.
|
|
*
|
|
*/
|
|
int
|
|
gem_mii_readreg(dev, phy, reg)
|
|
device_t dev;
|
|
int phy, reg;
|
|
{
|
|
struct gem_softc *sc = device_get_softc(dev);
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mif = sc->sc_h;
|
|
int n;
|
|
u_int32_t v;
|
|
|
|
#ifdef GEM_DEBUG_PHY
|
|
printf("gem_mii_readreg: phy %d reg %d\n", phy, reg);
|
|
#endif
|
|
|
|
#if 0
|
|
/* Select the desired PHY in the MIF configuration register */
|
|
v = bus_space_read_4(t, mif, GEM_MIF_CONFIG);
|
|
/* Clear PHY select bit */
|
|
v &= ~GEM_MIF_CONFIG_PHY_SEL;
|
|
if (phy == GEM_PHYAD_EXTERNAL)
|
|
/* Set PHY select bit to get at external device */
|
|
v |= GEM_MIF_CONFIG_PHY_SEL;
|
|
bus_space_write_4(t, mif, GEM_MIF_CONFIG, v);
|
|
#endif
|
|
|
|
/* Construct the frame command */
|
|
v = (reg << GEM_MIF_REG_SHIFT) | (phy << GEM_MIF_PHY_SHIFT) |
|
|
GEM_MIF_FRAME_READ;
|
|
|
|
bus_space_write_4(t, mif, GEM_MIF_FRAME, v);
|
|
for (n = 0; n < 100; n++) {
|
|
DELAY(1);
|
|
v = bus_space_read_4(t, mif, GEM_MIF_FRAME);
|
|
if (v & GEM_MIF_FRAME_TA0)
|
|
return (v & GEM_MIF_FRAME_DATA);
|
|
}
|
|
|
|
device_printf(sc->sc_dev, "mii_read timeout\n");
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
gem_mii_writereg(dev, phy, reg, val)
|
|
device_t dev;
|
|
int phy, reg, val;
|
|
{
|
|
struct gem_softc *sc = device_get_softc(dev);
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mif = sc->sc_h;
|
|
int n;
|
|
u_int32_t v;
|
|
|
|
#ifdef GEM_DEBUG_PHY
|
|
printf("gem_mii_writereg: phy %d reg %d val %x\n", phy, reg, val);
|
|
#endif
|
|
|
|
#if 0
|
|
/* Select the desired PHY in the MIF configuration register */
|
|
v = bus_space_read_4(t, mif, GEM_MIF_CONFIG);
|
|
/* Clear PHY select bit */
|
|
v &= ~GEM_MIF_CONFIG_PHY_SEL;
|
|
if (phy == GEM_PHYAD_EXTERNAL)
|
|
/* Set PHY select bit to get at external device */
|
|
v |= GEM_MIF_CONFIG_PHY_SEL;
|
|
bus_space_write_4(t, mif, GEM_MIF_CONFIG, v);
|
|
#endif
|
|
/* Construct the frame command */
|
|
v = GEM_MIF_FRAME_WRITE |
|
|
(phy << GEM_MIF_PHY_SHIFT) |
|
|
(reg << GEM_MIF_REG_SHIFT) |
|
|
(val & GEM_MIF_FRAME_DATA);
|
|
|
|
bus_space_write_4(t, mif, GEM_MIF_FRAME, v);
|
|
for (n = 0; n < 100; n++) {
|
|
DELAY(1);
|
|
v = bus_space_read_4(t, mif, GEM_MIF_FRAME);
|
|
if (v & GEM_MIF_FRAME_TA0)
|
|
return (1);
|
|
}
|
|
|
|
device_printf(sc->sc_dev, "mii_write timeout\n");
|
|
return (0);
|
|
}
|
|
|
|
void
|
|
gem_mii_statchg(dev)
|
|
device_t dev;
|
|
{
|
|
struct gem_softc *sc = device_get_softc(dev);
|
|
#ifdef GEM_DEBUG
|
|
int instance;
|
|
#endif
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t mac = sc->sc_h;
|
|
u_int32_t v;
|
|
|
|
#ifdef GEM_DEBUG
|
|
instance = IFM_INST(sc->sc_mii->mii_media.ifm_cur->ifm_media);
|
|
if (sc->sc_debug)
|
|
printf("gem_mii_statchg: status change: phy = %d\n",
|
|
sc->sc_phys[instance]);
|
|
#endif
|
|
|
|
/* Set tx full duplex options */
|
|
bus_space_write_4(t, mac, GEM_MAC_TX_CONFIG, 0);
|
|
DELAY(10000); /* reg must be cleared and delay before changing. */
|
|
v = GEM_MAC_TX_ENA_IPG0|GEM_MAC_TX_NGU|GEM_MAC_TX_NGU_LIMIT|
|
|
GEM_MAC_TX_ENABLE;
|
|
if ((IFM_OPTIONS(sc->sc_mii->mii_media_active) & IFM_FDX) != 0) {
|
|
v |= GEM_MAC_TX_IGN_CARRIER|GEM_MAC_TX_IGN_COLLIS;
|
|
}
|
|
bus_space_write_4(t, mac, GEM_MAC_TX_CONFIG, v);
|
|
|
|
/* XIF Configuration */
|
|
v = GEM_MAC_XIF_LINK_LED;
|
|
v |= GEM_MAC_XIF_TX_MII_ENA;
|
|
|
|
/* If an external transceiver is connected, enable its MII drivers */
|
|
sc->sc_mif_config = bus_space_read_4(t, mac, GEM_MIF_CONFIG);
|
|
if ((sc->sc_mif_config & GEM_MIF_CONFIG_MDI1) != 0) {
|
|
/* External MII needs echo disable if half duplex. */
|
|
if ((IFM_OPTIONS(sc->sc_mii->mii_media_active) & IFM_FDX) != 0)
|
|
/* turn on full duplex LED */
|
|
v |= GEM_MAC_XIF_FDPLX_LED;
|
|
else
|
|
/* half duplex -- disable echo */
|
|
v |= GEM_MAC_XIF_ECHO_DISABL;
|
|
|
|
if (IFM_SUBTYPE(sc->sc_mii->mii_media_active) == IFM_1000_T)
|
|
v |= GEM_MAC_XIF_GMII_MODE;
|
|
else
|
|
v &= ~GEM_MAC_XIF_GMII_MODE;
|
|
} else {
|
|
/* Internal MII needs buf enable */
|
|
v |= GEM_MAC_XIF_MII_BUF_ENA;
|
|
}
|
|
bus_space_write_4(t, mac, GEM_MAC_XIF_CONFIG, v);
|
|
}
|
|
|
|
int
|
|
gem_mediachange(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
int error;
|
|
|
|
/* XXX Add support for serial media. */
|
|
|
|
GEM_LOCK(sc);
|
|
error = mii_mediachg(sc->sc_mii);
|
|
GEM_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
void
|
|
gem_mediastatus(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
|
|
GEM_LOCK(sc);
|
|
if ((ifp->if_flags & IFF_UP) == 0) {
|
|
GEM_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
mii_pollstat(sc->sc_mii);
|
|
ifmr->ifm_active = sc->sc_mii->mii_media_active;
|
|
ifmr->ifm_status = sc->sc_mii->mii_media_status;
|
|
GEM_UNLOCK(sc);
|
|
}
|
|
|
|
/*
|
|
* Process an ioctl request.
|
|
*/
|
|
static int
|
|
gem_ioctl(ifp, cmd, data)
|
|
struct ifnet *ifp;
|
|
u_long cmd;
|
|
caddr_t data;
|
|
{
|
|
struct gem_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
int error = 0;
|
|
|
|
switch (cmd) {
|
|
case SIOCSIFFLAGS:
|
|
GEM_LOCK(sc);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if ((sc->sc_ifflags ^ ifp->if_flags) == IFF_PROMISC)
|
|
gem_setladrf(sc);
|
|
else
|
|
gem_init_locked(sc);
|
|
} else {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
gem_stop(ifp, 0);
|
|
}
|
|
sc->sc_ifflags = ifp->if_flags;
|
|
GEM_UNLOCK(sc);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
GEM_LOCK(sc);
|
|
gem_setladrf(sc);
|
|
GEM_UNLOCK(sc);
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii->mii_media, cmd);
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, cmd, data);
|
|
break;
|
|
}
|
|
|
|
/* Try to get things going again */
|
|
GEM_LOCK(sc);
|
|
if (ifp->if_flags & IFF_UP)
|
|
gem_start_locked(ifp);
|
|
GEM_UNLOCK(sc);
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Set up the logical address filter.
|
|
*/
|
|
static void
|
|
gem_setladrf(sc)
|
|
struct gem_softc *sc;
|
|
{
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
struct ifmultiaddr *inm;
|
|
bus_space_tag_t t = sc->sc_bustag;
|
|
bus_space_handle_t h = sc->sc_h;
|
|
u_int32_t crc;
|
|
u_int32_t hash[16];
|
|
u_int32_t v;
|
|
int i;
|
|
|
|
GEM_LOCK_ASSERT(sc, MA_OWNED);
|
|
|
|
/* Get current RX configuration */
|
|
v = bus_space_read_4(t, h, GEM_MAC_RX_CONFIG);
|
|
|
|
/*
|
|
* Turn off promiscuous mode, promiscuous group mode (all multicast),
|
|
* and hash filter. Depending on the case, the right bit will be
|
|
* enabled.
|
|
*/
|
|
v &= ~(GEM_MAC_RX_PROMISCUOUS|GEM_MAC_RX_HASH_FILTER|
|
|
GEM_MAC_RX_PROMISC_GRP);
|
|
|
|
if ((ifp->if_flags & IFF_PROMISC) != 0) {
|
|
/* Turn on promiscuous mode */
|
|
v |= GEM_MAC_RX_PROMISCUOUS;
|
|
goto chipit;
|
|
}
|
|
if ((ifp->if_flags & IFF_ALLMULTI) != 0) {
|
|
hash[3] = hash[2] = hash[1] = hash[0] = 0xffff;
|
|
ifp->if_flags |= IFF_ALLMULTI;
|
|
v |= GEM_MAC_RX_PROMISC_GRP;
|
|
goto chipit;
|
|
}
|
|
|
|
/*
|
|
* Set up multicast address filter by passing all multicast addresses
|
|
* through a crc generator, and then using the high order 8 bits as an
|
|
* index into the 256 bit logical address filter. The high order 4
|
|
* bits selects the word, while the other 4 bits select the bit within
|
|
* the word (where bit 0 is the MSB).
|
|
*/
|
|
|
|
/* Clear hash table */
|
|
memset(hash, 0, sizeof(hash));
|
|
|
|
IF_ADDR_LOCK(ifp);
|
|
TAILQ_FOREACH(inm, &ifp->if_multiaddrs, ifma_link) {
|
|
if (inm->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
crc = ether_crc32_le(LLADDR((struct sockaddr_dl *)
|
|
inm->ifma_addr), ETHER_ADDR_LEN);
|
|
|
|
/* Just want the 8 most significant bits. */
|
|
crc >>= 24;
|
|
|
|
/* Set the corresponding bit in the filter. */
|
|
hash[crc >> 4] |= 1 << (15 - (crc & 15));
|
|
}
|
|
IF_ADDR_UNLOCK(ifp);
|
|
|
|
v |= GEM_MAC_RX_HASH_FILTER;
|
|
ifp->if_flags &= ~IFF_ALLMULTI;
|
|
|
|
/* Now load the hash table into the chip (if we are using it) */
|
|
for (i = 0; i < 16; i++) {
|
|
bus_space_write_4(t, h,
|
|
GEM_MAC_HASH0 + i * (GEM_MAC_HASH1-GEM_MAC_HASH0),
|
|
hash[i]);
|
|
}
|
|
|
|
chipit:
|
|
bus_space_write_4(t, h, GEM_MAC_RX_CONFIG, v);
|
|
}
|