Andrew Turner 210d6af74d Move more bus_space_* files to be built by files.arm. This leaves the ... definition in a file.* file under sys/arm/arm in the few cases we need it for non-fdt platforms. Sponsored by: ABT Systems Ltd		2015-11-21 15:30:08 +00:00
..
bcm283x_dwc_fdt.c	Refactor mailbox property API to make it usable for /dev/vcio driver:	2015-11-05 03:46:54 +00:00
bcm2835_audio.c	Fix some of WITNESS complaints and bootup lock by removing msg_avail	2015-11-08 04:15:52 +00:00
bcm2835_bsc.c	Add a mask to match only the relative base address of BSC controllers.	2015-02-16 19:06:31 +00:00
bcm2835_bscreg.h	Add the Raspberry Pi BSC (I2C compliant) controller driver.	2013-10-23 12:29:39 +00:00
bcm2835_bscvar.h	Add a mask to match only the relative base address of BSC controllers.	2015-02-16 19:06:31 +00:00
bcm2835_common.c	Stop using machine/fdt.h in the arm kernel code when we don't need it.	2015-04-04 21:34:26 +00:00
bcm2835_cpufreq.c	Refactor bcm2835_cpufreq to use bcm2835_mbox_property API	2015-11-11 00:45:41 +00:00
bcm2835_dma.c	Follow r261352 by updating all drivers which are children of simplebus	2014-02-02 19:17:28 +00:00
bcm2835_dma.h	Add driver for BCM2835's DMA engine	2013-02-28 19:48:19 +00:00
bcm2835_fb.c	Fix the sc(4) framebuffer driver on RPi 2.	2015-05-02 22:40:41 +00:00
bcm2835_fbd.c	Refactor mailbox property API to make it usable for /dev/vcio driver:	2015-11-05 03:46:54 +00:00
bcm2835_gpio.c	Make use of the newly introduced macros.	2015-02-17 20:37:21 +00:00
bcm2835_gpio.h	Export a function to allow BCM2835's peripheral devices to enable their	2013-09-07 18:48:15 +00:00
bcm2835_intr.c	Make interrupt dispatching MP safe. Use GPU interrupt bit in per-core	2015-11-06 17:12:33 +00:00
bcm2835_machdep.c	Add support for the Raspberry Pi 2. As the chip is based on the bcm2835 in	2015-03-25 10:59:42 +00:00
bcm2835_mbox_prop.h	Refactor mailbox property API to make it usable for /dev/vcio driver:	2015-11-05 03:46:54 +00:00
bcm2835_mbox.c	- Set have_message in interrupt to handle "response before READ" case	2015-11-11 00:41:02 +00:00
bcm2835_mbox.h	Driver for CPU frequency/voltage control on the Raspberry Pi.	2014-12-20 19:15:10 +00:00
bcm2835_sdhci.c	Refactor mailbox property API to make it usable for /dev/vcio driver:	2015-11-05 03:46:54 +00:00
bcm2835_spi.c	Add a missing wakeup when releasing ownership of the SPI hardware.	2015-06-02 16:07:28 +00:00
bcm2835_spireg.h	Add the Raspberry Pi SPI controller driver.	2013-10-24 16:27:33 +00:00
bcm2835_spivar.h	Add the Raspberry Pi SPI controller driver.	2013-10-24 16:27:33 +00:00
bcm2835_systimer.c	Use simple fixed name strings for these timecounters and eventimers which	2015-08-14 16:48:07 +00:00
bcm2835_vcbus.h	Fix framebuffer compatibility with new RPi firmware. Framebuffer driver	2015-10-30 00:24:37 +00:00
bcm2835_vcio.c	Add /dev/vcio, userland access point to VideoCore mailbox property channel	2015-11-05 04:16:03 +00:00
bcm2835_wdog.c	Stop using machine/fdt.h in the arm kernel code when we don't need it.	2015-04-04 21:34:26 +00:00
bcm2835_wdog.h
bcm2836_mp.c	An IPI must be cleared before it is handled otherwise next IPI could be	2015-10-01 12:09:05 +00:00
bcm2836.c	Make interrupt dispatching MP safe. Use GPU interrupt bit in per-core	2015-11-06 17:12:33 +00:00
bcm2836.h	Make interrupt dispatching MP safe. Use GPU interrupt bit in per-core	2015-11-06 17:12:33 +00:00
files.bcm283x	Move more bus_space_* files to be built by files.arm. This leaves the	2015-11-21 15:30:08 +00:00
files.bcm2835	Build the cpufunc_asm_* files based on the cpu type, not which config file	2015-03-29 22:43:39 +00:00
files.bcm2836	Add the SMP support for Raspberry Pi 2 (BCM2836).	2015-05-07 22:11:44 +00:00
std.bcm2835	Add the SOC_BCM2835 and SOC_BCM2836 options for the arm kernel and add the	2015-03-24 18:46:01 +00:00
std.bcm2836	Add the SMP support for Raspberry Pi 2 (BCM2836).	2015-05-07 22:11:44 +00:00
std.rpi	Stop setting {KERN,}PHYSADDR on armv6, it's unneeded.	2015-11-20 16:12:22 +00:00
vc_vchi_audioserv_defs.h	Add VideoCore audio driver for Rasperry Pi (BCM2835)	2015-02-08 01:12:40 +00:00