d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
22b9c86cfd
freebsd-nq/sys/cam/scsi/scsi_all.h
Kenneth D. Merry 50642f180c Fix several potential buffer overrun conditions. These changes have been 
tested both in the kernel and in userland.  Also, fix a couple of printf
warnings that show up when CAMDEBUG is defined.

Reviewed by:		imp
Partially submitted by:	imp
1998-10-15 19:08:58 +00:00

913 lines
22 KiB
C
Raw Blame History

/*
* Largely written by Julian Elischer (julian@tfs.com)
* for TRW Financial Systems.
*
* TRW Financial Systems, in accordance with their agreement with Carnegie
* Mellon University, makes this software available to CMU to distribute
* or use in any manner that they see fit as long as this message is kept with
* the software. For this reason TFS also grants any other persons or
* organisations permission to use or modify this software.
*
* TFS supplies this software to be publicly redistributed
* on the understanding that TFS is not responsible for the correct
* functioning of this software in any circumstances.
*
* Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
*
* $Id: scsi_all.h,v 1.4 1998/10/02 05:25:49 ken Exp $
*/
/*
* SCSI general interface description
*/
#ifndef _SCSI_SCSI_ALL_H
#define _SCSI_SCSI_ALL_H 1
#include <sys/cdefs.h>
/*
* SCSI command format
*/
/*
* Define dome bits that are in ALL (or a lot of) scsi commands
*/
#define SCSI_CTL_LINK 0x01
#define SCSI_CTL_FLAG 0x02
#define SCSI_CTL_VENDOR 0xC0
#define SCSI_CMD_LUN 0xA0 /* these two should not be needed */
#define SCSI_CMD_LUN_SHIFT 5 /* LUN in the cmd is no longer SCSI */
#define SCSI_MAX_CDBLEN 16 /*
* 16 byte commands are in the
* SCSI-3 spec
*/
#if defined(CAM_MAX_CDBLEN) && (CAM_MAX_CDBLEN < SCSI_MAX_CDBLEN)
#error "CAM_MAX_CDBLEN cannot be less than SCSI_MAX_CDBLEN"
#endif
/*
* This type defines actions to be taken when a particular sense code is
* received. Right now, these flags are only defined to take up 16 bits,
* but can be expanded in the future if necessary.
*/
typedef enum {
SS_NOP = 0x000000, /* Do nothing */
SS_RETRY = 0x010000, /* Retry the command */
SS_FAIL = 0x020000, /* Bail out */
SS_START = 0x030000, /* Send a Start Unit command to the device,
* then retry the original command.
*/
SS_TUR = 0x040000, /* Send a Test Unit Ready command to the
* device, then retry the original command.
*/
SS_MANUAL = 0x050000, /*
* This error must be handled manually,
* i.e. the code must look at the asc and
* ascq values and determine the proper
* course of action.
*/
SS_TURSTART = 0x060000, /*
* Send a Test Unit Ready command to the
* device, and if that fails, send a start
* unit.
*/
SS_MASK = 0xff0000
} scsi_sense_action;
typedef enum {
SSQ_NONE = 0x0000,
SSQ_DECREMENT_COUNT = 0x0100, /* Decrement the retry count */
SSQ_MANY = 0x0200, /* send lots of recovery commands */
SSQ_RANGE = 0x0400, /*
* Yes, this is a hack. Basically,
* if this flag is set then it
* represents an ascq range. The
* "correct" way to implement the
* ranges might be to add a special
* field to the sense code table,
* but that would take up a lot of
* additional space. This solution
* isn't as elegant, but is more
* space efficient.
*/
SSQ_PRINT_SENSE = 0x0800,
SSQ_MASK = 0xff00
} scsi_sense_action_qualifier;
/* Mask for error status values */
#define SS_ERRMASK 0xff
/* The default error action */
#define SS_DEF SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE|EIO
/* Default error action, without an error return value */
#define SS_NEDEF SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE
/* Default error action, without sense printing or an error return value */
#define SS_NEPDEF SS_RETRY|SSQ_DECREMENT_COUNT
struct scsi_generic
{
u_int8_t opcode;
u_int8_t bytes[11];
};
struct scsi_request_sense
{
u_int8_t opcode;
u_int8_t byte2;
u_int8_t unused[2];
u_int8_t length;
u_int8_t control;
};
struct scsi_test_unit_ready
{
u_int8_t opcode;
u_int8_t byte2;
u_int8_t unused[3];
u_int8_t control;
};
struct scsi_send_diag
{
u_int8_t opcode;
u_int8_t byte2;
#define SSD_UOL 0x01
#define SSD_DOL 0x02
#define SSD_SELFTEST 0x04
#define SSD_PF 0x10
u_int8_t unused[1];
u_int8_t paramlen[2];
u_int8_t control;
};
struct scsi_sense
{
u_int8_t opcode;
u_int8_t byte2;
u_int8_t unused[2];
u_int8_t length;
u_int8_t control;
};
struct scsi_inquiry
{
u_int8_t opcode;
u_int8_t byte2;
#define SI_EVPD 0x01
u_int8_t page_code;
u_int8_t reserved;
u_int8_t length;
u_int8_t control;
};
struct scsi_mode_sense_6
{
u_int8_t opcode;
u_int8_t byte2;
#define SMS_DBD 0x08
u_int8_t page;
#define SMS_PAGE_CODE 0x3F
#define SMS_VENDOR_SPECIFIC_PAGE 0x00
#define SMS_DISCONNECT_RECONNECT_PAGE 0x02
#define SMS_PERIPHERAL_DEVICE_PAGE 0x09
#define SMS_CONTROL_MODE_PAGE 0x0A
#define SMS_ALL_PAGES_PAGE 0x3F
#define SMS_PAGE_CTRL_MASK 0xC0
#define SMS_PAGE_CTRL_CURRENT 0x00
#define SMS_PAGE_CTRL_CHANGEABLE 0x40
#define SMS_PAGE_CTRL_DEFAULT 0x80
#define SMS_PAGE_CTRL_SAVED 0xC0
u_int8_t unused;
u_int8_t length;
u_int8_t control;
};
struct scsi_mode_sense_10
{
u_int8_t opcode;
u_int8_t byte2; /* same bits as small version */
u_int8_t page; /* same bits as small version */
u_int8_t unused[4];
u_int8_t length[2];
u_int8_t control;
};
struct scsi_mode_select_6
{
u_int8_t opcode;
u_int8_t byte2;
#define SMS_SP 0x01
#define SMS_PF 0x10
u_int8_t unused[2];
u_int8_t length;
u_int8_t control;
};
struct scsi_mode_select_10
{
u_int8_t opcode;
u_int8_t byte2; /* same bits as small version */
u_int8_t unused[5];
u_int8_t length[2];
u_int8_t control;
};
/*
* When sending a mode select to a tape drive, the medium type must be 0.
*/
struct scsi_mode_hdr_6
{
u_int8_t datalen;
u_int8_t medium_type;
u_int8_t dev_specific;
u_int8_t block_descr_len;
};
struct scsi_mode_hdr_10
{
u_int8_t datalen[2];
u_int8_t medium_type;
u_int8_t dev_specific;
u_int8_t reserved[2];
u_int8_t block_descr_len[2];
};
struct scsi_mode_block_descr
{
u_int8_t density_code;
u_int8_t num_blocks[3];
u_int8_t reserved;
u_int8_t block_len[3];
};
struct scsi_control_page {
u_int8_t page_code;
u_int8_t page_length;
u_int8_t rlec;
#define SCB_RLEC 0x01 /*Report Log Exception Cond*/
u_int8_t queue_flags;
#define SCP_QUEUE_ALG_MASK 0xF0
#define SCP_QUEUE_ALG_RESTRICTED 0x00
#define SCP_QUEUE_ALG_UNRESTRICTED 0x10
#define SCP_QUEUE_ERR 0x02 /*Queued I/O aborted for CACs*/
#define SCP_QUEUE_DQUE 0x01 /*Queued I/O disabled*/
u_int8_t eca_and_aen;
#define SCP_EECA 0x80 /*Enable Extended CA*/
#define SCP_RAENP 0x04 /*Ready AEN Permission*/
#define SCP_UAAENP 0x02 /*UA AEN Permission*/
#define SCP_EAENP 0x01 /*Error AEN Permission*/
u_int8_t reserved;
u_int8_t aen_holdoff_period[2];
};
struct scsi_reserve
{
u_int8_t opcode;
u_int8_t byte2;
u_int8_t unused[2];
u_int8_t length;
u_int8_t control;
};
struct scsi_release
{
u_int8_t opcode;
u_int8_t byte2;
u_int8_t unused[2];
u_int8_t length;
u_int8_t control;
};
struct scsi_prevent
{
u_int8_t opcode;
u_int8_t byte2;
u_int8_t unused[2];
u_int8_t how;
u_int8_t control;
};
#define PR_PREVENT 0x01
#define PR_ALLOW 0x00
struct scsi_sync_cache
{
u_int8_t opcode;
u_int8_t byte2;
u_int8_t begin_lba[4];
u_int8_t reserved;
u_int8_t lb_count[2];
u_int8_t control;
};
struct scsi_changedef
{
u_int8_t opcode;
u_int8_t byte2;
u_int8_t unused1;
u_int8_t how;
u_int8_t unused[4];
u_int8_t datalen;
u_int8_t control;
};
struct scsi_read_buffer
{
u_int8_t opcode;
u_int8_t byte2;
#define RWB_MODE 0x07
#define RWB_MODE_HDR_DATA 0x00
#define RWB_MODE_DATA 0x02
#define RWB_MODE_DOWNLOAD 0x04
#define RWB_MODE_DOWNLOAD_SAVE 0x05
u_int8_t buffer_id;
u_int8_t offset[3];
u_int8_t length[3];
u_int8_t control;
};
struct scsi_write_buffer
{
u_int8_t opcode;
u_int8_t byte2;
u_int8_t buffer_id;
u_int8_t offset[3];
u_int8_t length[3];
u_int8_t control;
};
struct scsi_rw_6
{
u_int8_t opcode;
u_int8_t addr[3];
/* only 5 bits are valid in the MSB address byte */
#define SRW_TOPADDR 0x1F
u_int8_t length;
u_int8_t control;
};
struct scsi_rw_10
{
u_int8_t opcode;
#define SRW10_RELADDR 0x01
#define SRW10_FUA 0x08
#define SRW10_DPO 0x10
u_int8_t byte2;
u_int8_t addr[4];
u_int8_t reserved;
u_int8_t length[2];
u_int8_t control;
};
struct scsi_rw_12
{
u_int8_t opcode;
#define SRW12_RELADDR 0x01
#define SRW12_FUA 0x08
#define SRW12_DPO 0x10
u_int8_t byte2;
u_int8_t addr[4];
u_int8_t reserved;
u_int8_t length[4];
u_int8_t control;
};
struct scsi_start_stop_unit
{
u_int8_t opcode;
u_int8_t byte2;
#define SSS_IMMED 0x01
u_int8_t reserved[2];
u_int8_t how;
#define SSS_START 0x01
#define SSS_LOEJ 0x02
u_int8_t control;
};
#define SC_SCSI_1 0x01
#define SC_SCSI_2 0x03
/*
* Opcodes
*/
#define TEST_UNIT_READY 0x00
#define REQUEST_SENSE 0x03
#define READ_6 0x08
#define WRITE_6 0x0a
#define INQUIRY 0x12
#define MODE_SELECT_6 0x15
#define MODE_SENSE_6 0x1a
#define START_STOP_UNIT 0x1b
#define START_STOP 0x1b
#define RESERVE 0x16
#define RELEASE 0x17
#define PREVENT_ALLOW 0x1e
#define READ_CAPACITY 0x25
#define READ_10 0x28
#define WRITE_10 0x2a
#define POSITION_TO_ELEMENT 0x2b
#define SYNCHRONIZE_CACHE 0x35
#define WRITE_BUFFER 0x3b
#define READ_BUFFER 0x3c
#define CHANGE_DEFINITION 0x40
#define MODE_SELECT_10 0x55
#define MODE_SENSE_10 0x5A
#define MOVE_MEDIUM 0xa5
#define READ_12 0xa8
#define WRITE_12 0xaa
#define READ_ELEMENT_STATUS 0xb8
/*
* Device Types
*/
#define T_DIRECT 0x00
#define T_SEQUENTIAL 0x01
#define T_PRINTER 0x02
#define T_PROCESSOR 0x03
#define T_WORM 0x04
#define T_CDROM 0x05
#define T_SCANNER 0x06
#define T_OPTICAL 0x07
#define T_CHANGER 0x08
#define T_COMM 0x09
#define T_ASC0 0x0a
#define T_ASC1 0x0b
#define T_STORARRAY 0x0c
#define T_ENCLOSURE 0x0d
#define T_NODEVICE 0x1F
#define T_ANY 0xFF /* Used in Quirk table matches */
#define T_REMOV 1
#define T_FIXED 0
struct scsi_inquiry_data
{
u_int8_t device;
#define SID_TYPE(inq_data) ((inq_data)->device & 0x1f)
#define SID_QUAL(inq_data) (((inq_data)->device & 0xE0) >> 5)
#define SID_QUAL_LU_CONNECTED 0x00 /* The specified peripheral device
* type is currently connected to
* logical unit. If the target cannot
* determine whether or not a physical
* device is currently connected, it
* shall also use this peripheral
* qualifier when returning the INQUIRY
* data. This peripheral qualifier
* does not mean that the device is
* ready for access by the initiator.
*/
#define SID_QUAL_LU_OFFLINE 0x01 /* The target is capable of supporting
* the specified peripheral device type
* on this logical unit; however, the
* physical device is not currently
* connected to this logical unit.
*/
#define SID_QUAL_RSVD 0x02
#define SID_QUAL_BAD_LU 0x03 /* The target is not capable of
* supporting a physical device on
* this logical unit. For this
* peripheral qualifier the peripheral
* device type shall be set to 1Fh to
* provide compatibility with previous
* versions of SCSI. All other
* peripheral device type values are
* reserved for this peripheral
* qualifier.
*/
#define SID_QUAL_IS_VENDOR_UNIQUE(inq_data) ((SID_QUAL(inq_data) & 0x08) != 0)
u_int8_t dev_qual2;
#define SID_QUAL2 0x7F
#define SID_IS_REMOVABLE(inq_data) (((inq_data)->dev_qual2 & 0x80) != 0)
u_int8_t version;
#define SID_ANSI_REV(inq_data) ((inq_data)->version & 0x07)
#define SID_ECMA 0x38
#define SID_ISO 0xC0
u_int8_t response_format;
#define SID_AENC 0x80
#define SID_TrmIOP 0x40
u_int8_t additional_length;
u_int8_t reserved[2];
u_int8_t flags;
#define SID_SftRe 0x01
#define SID_CmdQue 0x02
#define SID_Linked 0x08
#define SID_Sync 0x10
#define SID_WBus16 0x20
#define SID_WBus32 0x40
#define SID_RelAdr 0x80
#define SID_VENDOR_SIZE 8
char vendor[SID_VENDOR_SIZE];
#define SID_PRODUCT_SIZE 16
char product[SID_PRODUCT_SIZE];
#define SID_REVISION_SIZE 4
char revision[SID_REVISION_SIZE];
};
struct scsi_vpd_unit_serial_number
{
u_int8_t device;
u_int8_t page_code;
#define SVPD_UNIT_SERIAL_NUMBER 0x80
u_int8_t reserved;
u_int8_t length; /* serial number length */
#define SVPD_SERIAL_NUM_SIZE 251
char serial_num[SVPD_SERIAL_NUM_SIZE];
};
struct scsi_read_capacity
{
u_int8_t opcode;
u_int8_t byte2;
u_int8_t addr[4];
u_int8_t unused[3];
u_int8_t control;
};
struct scsi_read_capacity_data
{
u_int8_t addr[4];
u_int8_t length[4];
};
struct scsi_sense_data
{
u_int8_t error_code;
#define SSD_ERRCODE 0x7F
#define SSD_CURRENT_ERROR 0x70
#define SSD_DEFERRED_ERROR 0x71
#define SSD_ERRCODE_VALID 0x80
u_int8_t segment;
u_int8_t flags;
#define SSD_KEY 0x0F
#define SSD_KEY_NO_SENSE 0x00
#define SSD_KEY_RECOVERED_ERROR 0x01
#define SSD_KEY_NOT_READY 0x02
#define SSD_KEY_MEDIUM_ERROR 0x03
#define SSD_KEY_HARDWARE_ERROR 0x04
#define SSD_KEY_ILLEGAL_REQUEST 0x05
#define SSD_KEY_UNIT_ATTENTION 0x06
#define SSD_KEY_DATA_PROTECT 0x07
#define SSD_KEY_BLANK_CHECK 0x08
#define SSD_KEY_Vendor_Specific 0x09
#define SSD_KEY_COPY_ABORTED 0x0a
#define SSD_KEY_ABORTED_COMMAND 0x0b
#define SSD_KEY_EQUAL 0x0c
#define SSD_KEY_VOLUME_OVERFLOW 0x0d
#define SSD_KEY_MISCOMPARE 0x0e
#define SSD_KEY_RESERVED 0x0f
#define SSD_ILI 0x20
#define SSD_EOM 0x40
#define SSD_FILEMARK 0x80
u_int8_t info[4];
u_int8_t extra_len;
u_int8_t cmd_spec_info[4];
u_int8_t add_sense_code;
u_int8_t add_sense_code_qual;
u_int8_t fru;
u_int8_t sense_key_spec[3];
#define SSD_SCS_VALID 0x80
#define SSD_FIELDPTR_CMD 0x40
#define SSD_BITPTR_VALID 0x08
#define SSD_BITPTR_VALUE 0x07
#define SSD_MIN_SIZE 18
u_int8_t extra_bytes[14];
#define SSD_FULL_SIZE sizeof(struct scsi_sense_data)
};
struct scsi_mode_header_6
{
u_int8_t data_length; /* Sense data length */
u_int8_t medium_type;
u_int8_t dev_spec;
u_int8_t blk_desc_len;
};
struct scsi_mode_header_10
{
u_int8_t data_length[2];/* Sense data length */
u_int8_t medium_type;
u_int8_t dev_spec;
u_int8_t unused[2];
u_int8_t blk_desc_len[2];
};
struct scsi_mode_blk_desc
{
u_int8_t density;
u_int8_t nblocks[3];
u_int8_t reserved;
u_int8_t blklen[3];
};
/*
* Status Byte
*/
#define SCSI_STATUS_OK 0x00
#define SCSI_STATUS_CHECK_COND 0x02
#define SCSI_STATUS_COND_MET 0x04
#define SCSI_STATUS_BUSY 0x08
#define SCSI_STATUS_INTERMED 0x10
#define SCSI_STATUS_INTERMED_COND_MET 0x14
#define SCSI_STATUS_RESERV_CONFLICT 0x18
#define SCSI_STATUS_CMD_TERMINATED 0x22
#define SCSI_STATUS_QUEUE_FULL 0x28
struct scsi_inquiry_pattern {
u_int8_t type;
u_int8_t media_type;
#define SIP_MEDIA_REMOVABLE 0x01
#define SIP_MEDIA_FIXED 0x02
const char *vendor;
const char *product;
const char *revision;
};
struct scsi_static_inquiry_pattern {
u_int8_t type;
u_int8_t media_type;
char vendor[SID_VENDOR_SIZE+1];
char product[SID_PRODUCT_SIZE+1];
char revision[SID_REVISION_SIZE+1];
};
struct scsi_sense_quirk_entry {
struct scsi_inquiry_pattern inq_pat;
int num_ascs;
struct asc_table_entry *asc_info;
};
struct asc_table_entry {
u_int8_t asc;
u_int8_t ascq;
u_int32_t action;
#if !defined(SCSI_NO_SENSE_STRINGS)
const char *desc;
#endif
};
struct op_table_entry {
u_int8_t opcode;
u_int16_t opmask;
const char *desc;
};
struct scsi_op_quirk_entry {
struct scsi_inquiry_pattern inq_pat;
int num_ops;
struct op_table_entry *op_table;
};
struct ccb_scsiio;
struct cam_periph;
union ccb;
#ifndef KERNEL
struct cam_device;
#endif
extern const char *scsi_sense_key_text[];
__BEGIN_DECLS
const char * scsi_sense_desc(int asc, int ascq,
struct scsi_inquiry_data *inq_data);
scsi_sense_action scsi_error_action(int asc, int ascq,
struct scsi_inquiry_data *inq_data);
#ifdef KERNEL
void scsi_sense_print(struct ccb_scsiio *csio);
int scsi_interpret_sense(union ccb *ccb,
u_int32_t sense_flags,
u_int32_t *relsim_flags,
u_int32_t *reduction,
u_int32_t *timeout,
scsi_sense_action error_action);
#else
char * scsi_sense_string(struct cam_device *device,
struct ccb_scsiio *csio,
char *str, int str_len);
void scsi_sense_print(struct cam_device *device,
struct ccb_scsiio *csio, FILE *ofile);
int scsi_interpret_sense(struct cam_device *device,
union ccb *ccb,
u_int32_t sense_flags,
u_int32_t *relsim_flags,
u_int32_t *reduction,
u_int32_t *timeout,
scsi_sense_action error_action);
#endif /* KERNEL */
#define SF_RETRY_UA 0x01
#define SF_NO_PRINT 0x02
#define SF_QUIET_IR 0x04 /* Be quiet about Illegal Request reponses */
#define SF_PRINT_ALWAYS 0x08
const char * scsi_op_desc(u_int16_t opcode,
struct scsi_inquiry_data *inq_data);
char * scsi_cdb_string(u_int8_t *cdb_ptr, char *cdb_string,
size_t len);
void scsi_print_inquiry(struct scsi_inquiry_data *inq_data);
u_int scsi_calc_syncsrate(u_int period_factor);
u_int scsi_calc_syncparam(u_int period);
void scsi_test_unit_ready(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *,
union ccb *),
u_int8_t tag_action,
u_int8_t sense_len, u_int32_t timeout);
void scsi_request_sense(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *,
union ccb *),
void *data_ptr, u_int8_t dxfer_len,
u_int8_t tag_action, u_int8_t sense_len,
u_int32_t timeout);
void scsi_inquiry(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int8_t *inq_buf,
u_int32_t inq_len, int evpd, u_int8_t page_code,
u_int8_t sense_len, u_int32_t timeout);
void scsi_mode_sense(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *,
union ccb *),
u_int8_t tag_action, int dbd,
u_int8_t page_code, u_int8_t page,
u_int8_t *param_buf, u_int32_t param_len,
u_int8_t sense_len, u_int32_t timeout);
void scsi_mode_select(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *,
union ccb *),
u_int8_t tag_action, int scsi_page_fmt,
int save_pages, u_int8_t *param_buf,
u_int32_t param_len, u_int8_t sense_len,
u_int32_t timeout);
void scsi_read_capacity(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *,
union ccb *), u_int8_t tag_action,
struct scsi_read_capacity_data *rcap_buf,
u_int8_t sense_len, u_int32_t timeout);
void scsi_prevent(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, u_int8_t action,
u_int8_t sense_len, u_int32_t timeout);
void scsi_synchronize_cache(struct ccb_scsiio *csio,
u_int32_t retries,
void (*cbfcnp)(struct cam_periph *,
union ccb *), u_int8_t tag_action,
u_int32_t begin_lba, u_int16_t lb_count,
u_int8_t sense_len, u_int32_t timeout);
void scsi_read_write(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int readop, u_int8_t byte2,
int minimum_cmd_size, u_int32_t lba,
u_int32_t block_count, u_int8_t *data_ptr,
u_int32_t dxfer_len, u_int8_t sense_len,
u_int32_t timeout);
void scsi_start_stop(struct ccb_scsiio *csio, u_int32_t retries,
void (*cbfcnp)(struct cam_periph *, union ccb *),
u_int8_t tag_action, int start, int load_eject,
int immediate, u_int8_t sense_len, u_int32_t timeout);
int scsi_inquiry_match(caddr_t inqbuffer, caddr_t table_entry);
int scsi_static_inquiry_match(caddr_t inqbuffer,
caddr_t table_entry);
static __inline void scsi_extract_sense(struct scsi_sense_data *sense,
int *error_code, int *sense_key,
int *asc, int *ascq);
static __inline void scsi_ulto2b(u_int32_t val, u_int8_t *bytes);
static __inline void scsi_ulto3b(u_int32_t val, u_int8_t *bytes);
static __inline void scsi_ulto4b(u_int32_t val, u_int8_t *bytes);
static __inline u_int32_t scsi_2btoul(u_int8_t *bytes);
static __inline u_int32_t scsi_3btoul(u_int8_t *bytes);
static __inline int32_t scsi_3btol(u_int8_t *bytes);
static __inline u_int32_t scsi_4btoul(u_int8_t *bytes);
static __inline void *find_mode_page_6(struct scsi_mode_header_6 *mode_header);
static __inline void *find_mode_page_10(struct scsi_mode_header_10 *mode_header);
static __inline void scsi_extract_sense(struct scsi_sense_data *sense,
int *error_code, int *sense_key,
int *asc, int *ascq)
{
*error_code = sense->error_code & SSD_ERRCODE;
*sense_key = sense->flags & SSD_KEY;
*asc = (sense->extra_len >= 5) ? sense->add_sense_code : 0;
*ascq = (sense->extra_len >= 6) ? sense->add_sense_code_qual : 0;
}
static __inline void
scsi_ulto2b(u_int32_t val, u_int8_t *bytes)
{
bytes[0] = (val >> 8) & 0xff;
bytes[1] = val & 0xff;
}
static __inline void
scsi_ulto3b(u_int32_t val, u_int8_t *bytes)
{
bytes[0] = (val >> 16) & 0xff;
bytes[1] = (val >> 8) & 0xff;
bytes[2] = val & 0xff;
}
static __inline void
scsi_ulto4b(u_int32_t val, u_int8_t *bytes)
{
bytes[0] = (val >> 24) & 0xff;
bytes[1] = (val >> 16) & 0xff;
bytes[2] = (val >> 8) & 0xff;
bytes[3] = val & 0xff;
}
static __inline u_int32_t
scsi_2btoul(u_int8_t *bytes)
{
u_int32_t rv;
rv = (bytes[0] << 8) |
bytes[1];
return (rv);
}
static __inline u_int32_t
scsi_3btoul(u_int8_t *bytes)
{
u_int32_t rv;
rv = (bytes[0] << 16) |
(bytes[1] << 8) |
bytes[2];
return (rv);
}
static __inline int32_t
scsi_3btol(u_int8_t *bytes)
{
u_int32_t rc = scsi_3btoul(bytes);
if (rc & 0x00800000)
rc |= 0xff000000;
return (int32_t) rc;
}
static __inline u_int32_t
scsi_4btoul(u_int8_t *bytes)
{
u_int32_t rv;
rv = (bytes[0] << 24) |
(bytes[1] << 16) |
(bytes[2] << 8) |
bytes[3];
return (rv);
}
/*
* Given the pointer to a returned mode sense buffer, return a pointer to
* the start of the first mode page.
*/
static __inline void *
find_mode_page_6(struct scsi_mode_header_6 *mode_header)
{
void *page_start;
page_start = (void *)((u_int8_t *)&mode_header[1] +
mode_header->blk_desc_len);
return(page_start);
}
static __inline void *
find_mode_page_10(struct scsi_mode_header_10 *mode_header)
{
void *page_start;
page_start = (void *)((u_int8_t *)&mode_header[1] +
scsi_2btoul(mode_header->blk_desc_len));
return(page_start);
}
__END_DECLS
#endif /*_SCSI_SCSI_ALL_H*/
Reference in New Issue View Git Blame Copy Permalink