freebsd-nq/sys/dev/usb
Sam Leffler 43b1161d4d Workaround design botch in usb: blindly mixing bus_dma with PIO does not
work on architectures with a write-back cache as the PIO writes end up
in the cache which the sync(BUS_DMASYNC_POSTREAD) in usb_transfer_complete
then discards; compensate in the xfer methods that do PIO by pushing the
writes out of the cache before usb_transfer_complete is called.

This fixes USB on xscale and likely other places.

Sponsored by:	hobnob
Reviewed by:	cognet, imp
MFC after:	1 month
2008-03-20 16:19:25 +00:00
..
dsbr100io.h Don't pretend to support !BSD systems. 2007-06-12 19:01:32 +00:00
ehci_pci.c Relax the BIOS/OS sempahore handoff code to workaround different hard 2008-03-12 20:57:17 +00:00
ehci.c Workaround design botch in usb: blindly mixing bus_dma with PIO does not 2008-03-20 16:19:25 +00:00
ehcireg.h
ehcivar.h Expand callout compatibility macros in the main usb bridges. 2007-06-14 16:23:31 +00:00
FILES Acknowledge (dearly) departed files 2006-11-21 22:29:06 +00:00
hid.c s/logprintf/printf/g 2007-06-20 05:11:37 +00:00
hid.h
if_aue.c Remove duplicate ID and recall that I comes after E in alphabetical 2007-06-23 05:59:53 +00:00
if_auereg.h Remove my "custom" locks that allow for lock acquire abort, they are 2007-01-08 23:24:21 +00:00
if_axe.c Apply le*toh() or htole*() to the variables of which we use the address 2008-03-07 16:55:24 +00:00
if_axereg.h Add private tx/rx buffer management to support large frame sizes 2007-11-10 16:23:38 +00:00
if_cdce.c Fix two more PRs: 2007-06-30 20:18:44 +00:00
if_cdcereg.h Prefer device_printf over printf 2007-06-10 07:33:48 +00:00
if_cue.c Note the Belkin F5U111 Adapter is covered by NETMATE entry. 2007-06-23 06:29:19 +00:00
if_cuereg.h Prefer device_printf to printf where sane. 2007-06-11 05:42:47 +00:00
if_kue.c Add a boatload of devices from OpenBSD and NetBSD to kue and cdce. 2007-06-23 06:47:43 +00:00
if_kuereg.h Prefer device_printf to printf 2007-06-11 05:50:47 +00:00
if_rue.c When all the other drivers were converted to scheduling a taskqueue to 2007-07-09 16:58:07 +00:00
if_ruereg.h Missed in last commit: add usb task for rue to use for its ticks. 2007-07-09 20:56:39 +00:00
if_rum.c - Add the Corega CG-WLUSB2GL from NetBSD 2008-03-20 05:05:37 +00:00
if_rumreg.h Update 802.11 wireless support: 2007-06-11 03:36:55 +00:00
if_rumvar.h Update 802.11 wireless support: 2007-06-11 03:36:55 +00:00
if_udav.c Cleanup lockmgr interface and exported KPI: 2008-01-24 12:34:30 +00:00
if_udavreg.h More removing compatibility macros. 2006-09-07 00:06:42 +00:00
if_ural.c Check wep flag in *_tx_mgt since we need to encrypt some management frame 2007-11-06 07:30:12 +00:00
if_uralreg.h Update 802.11 wireless support: 2007-06-11 03:36:55 +00:00
if_uralvar.h Update 802.11 wireless support: 2007-06-11 03:36:55 +00:00
if_zyd.c don't set sniffer mode to ON when the driver is running with the 2008-03-17 02:30:13 +00:00
if_zydfw.h upgrade zd1211b firmware for the zyd driver. This solves a hardware 2007-11-03 19:24:51 +00:00
if_zydreg.h - Remove magic number and fit max rx buffer size accurately. 2007-11-08 08:25:58 +00:00
kue_fw.h s/Static/static/g 2006-09-06 23:44:25 +00:00
ohci_pci.c Latest round of usb cleanups: 2007-06-21 14:42:34 +00:00
ohci.c Workaround design botch in usb: blindly mixing bus_dma with PIO does not 2008-03-20 16:19:25 +00:00
ohcireg.h Use the limited scatter-gather capabilities of ehci, ohci and uhci 2006-05-28 05:27:09 +00:00
ohcivar.h Expand callout compatibility macros in the main usb bridges. 2007-06-14 16:23:31 +00:00
rio500_usb.h Don't pretend to support !BSD systems. 2007-06-12 19:01:32 +00:00
rt2573_ucode.h Add support for Ralink Technology RT2501USB/RT2601USB devices. 2007-05-06 10:07:21 +00:00
sl811hs.c Include usb_port.h to fix build. 2007-06-19 10:28:08 +00:00
sl811hsreg.h
sl811hsvar.h Use pause() rather than using tsleep() on a dummy variable. 2007-02-27 17:19:33 +00:00
slhci_pccard.c Include usb_port.h to fix build. 2007-06-19 10:28:08 +00:00
uark.c Allow arbitrary baud rates, not just the standard ones. 2008-01-26 04:30:48 +00:00
ubsa.c - Add support for Axesstel MV100H, as used on CDMA network operated by O2 CZ 2008-02-26 18:12:32 +00:00
ubser.c Prefer device_printf to printf("%s: ...", device_get_nameunit()). On 2007-07-05 06:42:14 +00:00
ubser.h
uchcom.c Add Winchiphead (or Nanjin QinHeng Electronics) USB Serial converter driver. 2007-10-18 10:51:06 +00:00
ucom.c o Add module event handler. 2008-02-24 12:16:01 +00:00
ucomvar.h Eliminate usb_thread_t. 2007-06-12 17:30:54 +00:00
ucycom.c Latest round of usb cleanups: 2007-06-21 14:42:34 +00:00
udbp.c Prefer device_printf to printf + device_get_nameunit. This saves 2007-07-05 15:25:32 +00:00
udbp.h
ufm.c Latest round of usb cleanups: 2007-06-21 14:42:34 +00:00
ufoma.c Minor Bug fix that will cause panic with some terminal with voice path on USB. 2007-07-27 12:00:29 +00:00
uftdi.c Calculate baud rate divisor instead of allowing only a fixed set of 2008-01-25 02:41:44 +00:00
uftdireg.h Calculate baud rate divisor instead of allowing only a fixed set of 2008-01-25 02:41:44 +00:00
ugen.c The timeout is in milliseconds, not in hz. Only the portion of the 2007-06-28 06:22:40 +00:00
ugraphire_rdesc.h
uhci_pci.c Add PCI device support for Intel S7000FC4UR in usb and ichwd, systems 2007-11-15 23:59:36 +00:00
uhci.c Expand callout compatibility macros in the main usb bridges. 2007-06-14 16:23:31 +00:00
uhcireg.h
uhcivar.h Expand callout compatibility macros in the main usb bridges. 2007-06-14 16:23:31 +00:00
uhid.c Latest round of usb cleanups: 2007-06-21 14:42:34 +00:00
uhub.c Fix two more PRs: 2007-06-30 20:18:44 +00:00
uipaq.c Add one of HTC Smartphone/PocketPC device IDs. 2007-10-22 08:28:24 +00:00
ukbd.c Remove explicit calls to keyboard methods with their respective variants 2007-12-29 21:55:25 +00:00
ulpt.c Latest round of usb cleanups: 2007-06-21 14:42:34 +00:00
umass.c Add support for the VIA USB2IDE bridge [1]. 2008-02-21 19:07:08 +00:00
umct.c Finish removal of usb_port.h macros. 2007-06-18 22:27:57 +00:00
umodem.c Add missing newline in printf. 2007-07-29 18:16:43 +00:00
ums.c Partially revert 1.95. It changed the probe for a mouse device to only 2008-03-12 20:20:36 +00:00
uplcom.c - Add quirk for the TrendNet TU-S9 adapter, which uses new version of PL2303 2007-12-16 12:39:50 +00:00
urio.c Latest round of usb cleanups: 2007-06-21 14:42:34 +00:00
usb_ethersubr.c Add the following functions to abstract away the creation of task threads 2007-01-08 23:21:06 +00:00
usb_ethersubr.h Add the following functions to abstract away the creation of task threads 2007-01-08 23:21:06 +00:00
usb_if.m
usb_mem.c s/logprintf/printf/g 2007-06-20 05:11:37 +00:00
usb_mem.h Remove more __OtherBSD__ ifdefs that don't make sense, and haven't for 2007-06-13 05:45:48 +00:00
usb_port.h Rename the kthread_xxx (e.g. kthread_create()) calls 2007-10-20 23:23:23 +00:00
usb_quirks.c Add a quirk to ignore ASUS LCM display found on some ASUS laptops. 2008-03-14 15:59:30 +00:00
usb_quirks.h Add support for various MS Wirless usb mice. the patch is from 2007-06-29 21:07:41 +00:00
usb_subr.c Fix two more PRs: 2007-06-30 20:18:44 +00:00
usb.c Rename the kthread_xxx (e.g. kthread_create()) calls 2007-10-20 23:23:23 +00:00
usb.h Add definition for UIPROTO_MOUSE. 2007-06-30 02:40:21 +00:00
usbcdc.h
usbdevs - Add the Corega CG-WLUSB2GL from NetBSD 2008-03-20 05:05:37 +00:00
usbdi_util.c s/logprintf/printf/g 2007-06-20 05:11:37 +00:00
usbdi_util.h protect against multiple inclusion (this is useful when you 2007-01-03 10:50:03 +00:00
usbdi.c Correct cache handling for xfer requests marked URQ_REQUEST: many (if not 2008-03-20 16:04:13 +00:00
usbdi.h add support for %b printing of request + xfer flags 2008-03-20 03:09:59 +00:00
usbdivar.h add support for %b printing of request + xfer flags 2008-03-20 03:09:59 +00:00
usbhid.h
uscanner.c Add support for the EPSON CX5400 scanner 2008-02-26 18:19:39 +00:00
uslcom.c Oops, I accidently concatenated uslcom.[c4] multiple times before the 2008-03-05 14:18:29 +00:00
uvisor.c Prefer device_printf to printf("%s:...", device_get_nameunit(),...); 2007-07-05 06:28:46 +00:00
uvscom.c Prefer device_printf to printf("%s:...", device_get_nameunit(),...); 2007-07-05 06:28:46 +00:00
uxb360gp_rdesc.h