d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
23cd11b603
freebsd-nq/sys/arm/ti
History
Luiz Otavio O Souza 23cd11b603 Add support for dual emac mode. 
In dual emac mode, the CPSW subsystem provides two independent ethernets.

This is implemented (as recommended by TI's TRM) with a mixture of switch
settings (vlans) and specific features of CPSW subsystem.

The driver was splitted to accommodate the shared parts (RX and TX rings
for example) while it still provides two independent ethernets.

Each of the ethernet ports driver has it's own set of MDIO registers among
the other private settings.

Previously this driver always operate in promisc mode, now the Switch ALE
(address table entry) is properly initialized and enabled.

The driver is also tested (and known to work) with both ports operating in
single port mode (active_slave 0 or 1).

Tested on uBMC (dual emac mode, both ports in single mode, giga and fast
ethernet) and BBB (single port, fast ethernet).

Sponsored by:	Rubicon Communications (Netgate)
2016-03-17 19:35:08 +00:00
..
am335x Remove taskqueue_enqueue_fast(). 2016-03-01 17:47:32 +00:00
cpsw Add support for dual emac mode. 2016-03-17 19:35:08 +00:00
omap4 Almost all copies of platform_mp_init_secondary just called 2016-02-26 16:04:47 +00:00
twl Eliminate an unused-var warning by wrapping #if 0 around some tables of 2014-02-23 22:29:59 +00:00
usb Switch TI platform support code from using FreeBSD's custom-baked DTS 2015-05-22 03:16:18 +00:00
aintc.c Create a simplebus PNP info wrapper. 2015-12-18 05:29:22 +00:00
files.ti Move more bus_space_* files to be built by files.arm. This leaves the 2015-11-21 15:30:08 +00:00
std.ti Remove -Wa,-march=armv7a from arm kernel configs, it makes clang 3.5 sad 2015-01-01 23:21:46 +00:00
ti_adc.c Switch TI platform support code from using FreeBSD's custom-baked DTS 2015-05-22 03:16:18 +00:00
ti_adcreg.h Configure the analog input 7 which, on BBB, is connected to the 3V3B rail 2014-06-02 02:00:17 +00:00
ti_adcvar.h Configure the analog input 7 which, on BBB, is connected to the 3V3B rail 2014-06-02 02:00:17 +00:00
ti_common.c Stop defining fdt_pic_table with ARM_INTRNG, it's unused. 2016-01-22 12:51:12 +00:00
ti_cpuid.c ARM: Rename remaining instances of cpufunc_id() to cpu_ident(), 2016-02-01 14:28:58 +00:00
ti_cpuid.h Start removing the omap3 support. In base it was only ever a header and a 2014-10-13 15:35:08 +00:00
ti_edma3.c Switch TI platform support code from using FreeBSD's custom-baked DTS 2015-05-22 03:16:18 +00:00
ti_edma3.h
ti_gpio_if.m Rework the Ti GPIO code to allow for both the OMAP4 and AM335X attachments 2014-10-18 17:51:34 +00:00
ti_gpio.c Pass correct type of argument to ti_gpio_unmask_irq in ti_gpio_activate_resource 2015-08-03 01:22:49 +00:00
ti_gpio.h Switch TI platform support code from using FreeBSD's custom-baked DTS 2015-05-22 03:16:18 +00:00
ti_hwmods.c Add a routine to return the hardware instance/unit number from ti,hwmods, 2015-08-12 17:23:15 +00:00
ti_hwmods.h Add a routine to return the hardware instance/unit number from ti,hwmods, 2015-08-12 17:23:15 +00:00
ti_i2c.c Consistently capitalize "TI" as an abbreviation for Texas Instruments. 2015-11-12 20:14:25 +00:00
ti_i2c.h Rewrite of ti_i2c based on gonzo's patch, fix the following bugs/problems: 2014-08-20 17:02:37 +00:00
ti_machdep.c Move the Ti SoCs to use the ARM platform. This should help allowing a 2014-05-17 18:35:22 +00:00
ti_mbox.c Switch TI platform support code from using FreeBSD's custom-baked DTS 2015-05-22 03:16:18 +00:00
ti_mbox.h Add a driver for the Texas Instruments Mailbox hardware. 2013-11-16 08:20:50 +00:00
ti_pinmux.c Switch TI platform support code from using FreeBSD's custom-baked DTS 2015-05-22 03:16:18 +00:00
ti_pinmux.h Switch TI platform support code from using FreeBSD's custom-baked DTS 2015-05-22 03:16:18 +00:00
ti_prcm.c - Add clk_set_source_freq field to struct ti_clock_dev so clock device 2015-06-17 23:26:00 +00:00
ti_prcm.h - Add clk_set_source_freq field to struct ti_clock_dev so clock device 2015-06-17 23:26:00 +00:00
ti_pruss.c ti_pruss: pass the correct IRQ to userland. 2015-05-20 06:23:01 +00:00
ti_pruss.h ti_pruss: pass the correct IRQ to userland. 2015-05-20 06:23:01 +00:00
ti_scm.c Use EARLY_DRIVER_MODULE() for ti_scm driver to be attached before 2016-02-16 13:40:23 +00:00
ti_scm.h Switch TI platform support code from using FreeBSD's custom-baked DTS 2015-05-22 03:16:18 +00:00
ti_sdhci.c Move the DRIVER_MODULE() statements that declare mmc(4) to be a child of 2015-12-14 01:09:25 +00:00
ti_sdma.c Switch TI platform support code from using FreeBSD's custom-baked DTS 2015-05-22 03:16:18 +00:00
ti_sdma.h
ti_sdmareg.h
ti_smc.h
ti_smc.S Switch to a .cpu directive. These will work when clang 3.5 is imported 2014-12-05 19:23:51 +00:00
ti_wdt.c Stop using machine/fdt.h in the arm kernel code when we don't need it. 2015-04-04 21:34:26 +00:00
ti_wdt.h Add a driver for the TI watchdog. 2014-10-18 16:59:21 +00:00
tivar.h