d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
241804a5c8
freebsd-nq/sys/dev/ral/rt2661.c
Sam Leffler e66b0905fc o use the new association callback to notify the driver when joining a bss 
in sta and adhoc modes; this should've been done forever ago as most all
  drivers use this hook to set per-station transmit parameters such as for
  tx rate control
o adjust drivers to remove explicit calls to the driver newassoc method
2008-10-27 16:46:50 +00:00

2893 lines
73 KiB
C
Raw Blame History

/* $FreeBSD$ */
/*-
* Copyright (c) 2006
* Damien Bergamini <damien.bergamini@free.fr>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*-
* Ralink Technology RT2561, RT2561S and RT2661 chipset driver
* http://www.ralinktech.com/
*/
#include <sys/param.h>
#include <sys/sysctl.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/firmware.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <net/bpf.h>
#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_phy.h>
#include <net80211/ieee80211_radiotap.h>
#include <net80211/ieee80211_regdomain.h>
#include <net80211/ieee80211_amrr.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_ether.h>
#include <dev/ral/rt2661reg.h>
#include <dev/ral/rt2661var.h>
#define RAL_DEBUG
#ifdef RAL_DEBUG
#define DPRINTF(sc, fmt, ...) do { \
if (sc->sc_debug > 0) \
printf(fmt, __VA_ARGS__); \
} while (0)
#define DPRINTFN(sc, n, fmt, ...) do { \
if (sc->sc_debug >= (n)) \
printf(fmt, __VA_ARGS__); \
} while (0)
#else
#define DPRINTF(sc, fmt, ...)
#define DPRINTFN(sc, n, fmt, ...)
#endif
static struct ieee80211vap *rt2661_vap_create(struct ieee80211com *,
const char name[IFNAMSIZ], int unit, int opmode,
int flags, const uint8_t bssid[IEEE80211_ADDR_LEN],
const uint8_t mac[IEEE80211_ADDR_LEN]);
static void rt2661_vap_delete(struct ieee80211vap *);
static void rt2661_dma_map_addr(void *, bus_dma_segment_t *, int,
int);
static int rt2661_alloc_tx_ring(struct rt2661_softc *,
struct rt2661_tx_ring *, int);
static void rt2661_reset_tx_ring(struct rt2661_softc *,
struct rt2661_tx_ring *);
static void rt2661_free_tx_ring(struct rt2661_softc *,
struct rt2661_tx_ring *);
static int rt2661_alloc_rx_ring(struct rt2661_softc *,
struct rt2661_rx_ring *, int);
static void rt2661_reset_rx_ring(struct rt2661_softc *,
struct rt2661_rx_ring *);
static void rt2661_free_rx_ring(struct rt2661_softc *,
struct rt2661_rx_ring *);
static struct ieee80211_node *rt2661_node_alloc(struct ieee80211vap *,
const uint8_t [IEEE80211_ADDR_LEN]);
static void rt2661_newassoc(struct ieee80211_node *, int);
static int rt2661_newstate(struct ieee80211vap *,
enum ieee80211_state, int);
static uint16_t rt2661_eeprom_read(struct rt2661_softc *, uint8_t);
static void rt2661_rx_intr(struct rt2661_softc *);
static void rt2661_tx_intr(struct rt2661_softc *);
static void rt2661_tx_dma_intr(struct rt2661_softc *,
struct rt2661_tx_ring *);
static void rt2661_mcu_beacon_expire(struct rt2661_softc *);
static void rt2661_mcu_wakeup(struct rt2661_softc *);
static void rt2661_mcu_cmd_intr(struct rt2661_softc *);
static void rt2661_scan_start(struct ieee80211com *);
static void rt2661_scan_end(struct ieee80211com *);
static void rt2661_set_channel(struct ieee80211com *);
static void rt2661_setup_tx_desc(struct rt2661_softc *,
struct rt2661_tx_desc *, uint32_t, uint16_t, int,
int, const bus_dma_segment_t *, int, int);
static int rt2661_tx_data(struct rt2661_softc *, struct mbuf *,
struct ieee80211_node *, int);
static int rt2661_tx_mgt(struct rt2661_softc *, struct mbuf *,
struct ieee80211_node *);
static void rt2661_start_locked(struct ifnet *);
static void rt2661_start(struct ifnet *);
static int rt2661_raw_xmit(struct ieee80211_node *, struct mbuf *,
const struct ieee80211_bpf_params *);
static void rt2661_watchdog(void *);
static int rt2661_ioctl(struct ifnet *, u_long, caddr_t);
static void rt2661_bbp_write(struct rt2661_softc *, uint8_t,
uint8_t);
static uint8_t rt2661_bbp_read(struct rt2661_softc *, uint8_t);
static void rt2661_rf_write(struct rt2661_softc *, uint8_t,
uint32_t);
static int rt2661_tx_cmd(struct rt2661_softc *, uint8_t,
uint16_t);
static void rt2661_select_antenna(struct rt2661_softc *);
static void rt2661_enable_mrr(struct rt2661_softc *);
static void rt2661_set_txpreamble(struct rt2661_softc *);
static void rt2661_set_basicrates(struct rt2661_softc *,
const struct ieee80211_rateset *);
static void rt2661_select_band(struct rt2661_softc *,
struct ieee80211_channel *);
static void rt2661_set_chan(struct rt2661_softc *,
struct ieee80211_channel *);
static void rt2661_set_bssid(struct rt2661_softc *,
const uint8_t *);
static void rt2661_set_macaddr(struct rt2661_softc *,
const uint8_t *);
static void rt2661_update_promisc(struct ifnet *);
static int rt2661_wme_update(struct ieee80211com *) __unused;
static void rt2661_update_slot(struct ifnet *);
static const char *rt2661_get_rf(int);
static void rt2661_read_eeprom(struct rt2661_softc *,
struct ieee80211com *);
static int rt2661_bbp_init(struct rt2661_softc *);
static void rt2661_init_locked(struct rt2661_softc *);
static void rt2661_init(void *);
static void rt2661_stop_locked(struct rt2661_softc *);
static void rt2661_stop(void *);
static int rt2661_load_microcode(struct rt2661_softc *);
#ifdef notyet
static void rt2661_rx_tune(struct rt2661_softc *);
static void rt2661_radar_start(struct rt2661_softc *);
static int rt2661_radar_stop(struct rt2661_softc *);
#endif
static int rt2661_prepare_beacon(struct rt2661_softc *,
struct ieee80211vap *);
static void rt2661_enable_tsf_sync(struct rt2661_softc *);
static int rt2661_get_rssi(struct rt2661_softc *, uint8_t);
static const struct {
uint32_t reg;
uint32_t val;
} rt2661_def_mac[] = {
RT2661_DEF_MAC
};
static const struct {
uint8_t reg;
uint8_t val;
} rt2661_def_bbp[] = {
RT2661_DEF_BBP
};
static const struct rfprog {
uint8_t chan;
uint32_t r1, r2, r3, r4;
} rt2661_rf5225_1[] = {
RT2661_RF5225_1
}, rt2661_rf5225_2[] = {
RT2661_RF5225_2
};
int
rt2661_attach(device_t dev, int id)
{
struct rt2661_softc *sc = device_get_softc(dev);
struct ieee80211com *ic;
struct ifnet *ifp;
uint32_t val;
int error, ac, ntries;
uint8_t bands;
sc->sc_id = id;
sc->sc_dev = dev;
ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211);
if (ifp == NULL) {
device_printf(sc->sc_dev, "can not if_alloc()\n");
return ENOMEM;
}
ic = ifp->if_l2com;
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
MTX_DEF | MTX_RECURSE);
callout_init_mtx(&sc->watchdog_ch, &sc->sc_mtx, 0);
/* wait for NIC to initialize */
for (ntries = 0; ntries < 1000; ntries++) {
if ((val = RAL_READ(sc, RT2661_MAC_CSR0)) != 0)
break;
DELAY(1000);
}
if (ntries == 1000) {
device_printf(sc->sc_dev,
"timeout waiting for NIC to initialize\n");
error = EIO;
goto fail1;
}
/* retrieve RF rev. no and various other things from EEPROM */
rt2661_read_eeprom(sc, ic);
device_printf(dev, "MAC/BBP RT%X, RF %s\n", val,
rt2661_get_rf(sc->rf_rev));
/*
* Allocate Tx and Rx rings.
*/
for (ac = 0; ac < 4; ac++) {
error = rt2661_alloc_tx_ring(sc, &sc->txq[ac],
RT2661_TX_RING_COUNT);
if (error != 0) {
device_printf(sc->sc_dev,
"could not allocate Tx ring %d\n", ac);
goto fail2;
}
}
error = rt2661_alloc_tx_ring(sc, &sc->mgtq, RT2661_MGT_RING_COUNT);
if (error != 0) {
device_printf(sc->sc_dev, "could not allocate Mgt ring\n");
goto fail2;
}
error = rt2661_alloc_rx_ring(sc, &sc->rxq, RT2661_RX_RING_COUNT);
if (error != 0) {
device_printf(sc->sc_dev, "could not allocate Rx ring\n");
goto fail3;
}
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_init = rt2661_init;
ifp->if_ioctl = rt2661_ioctl;
ifp->if_start = rt2661_start;
IFQ_SET_MAXLEN(&ifp->if_snd, IFQ_MAXLEN);
ifp->if_snd.ifq_drv_maxlen = IFQ_MAXLEN;
IFQ_SET_READY(&ifp->if_snd);
ic->ic_ifp = ifp;
ic->ic_opmode = IEEE80211_M_STA;
ic->ic_phytype = IEEE80211_T_OFDM; /* not only, but not used */
/* set device capabilities */
ic->ic_caps =
IEEE80211_C_STA /* station mode */
| IEEE80211_C_IBSS /* ibss, nee adhoc, mode */
| IEEE80211_C_HOSTAP /* hostap mode */
| IEEE80211_C_MONITOR /* monitor mode */
| IEEE80211_C_AHDEMO /* adhoc demo mode */
| IEEE80211_C_WDS /* 4-address traffic works */
| IEEE80211_C_SHPREAMBLE /* short preamble supported */
| IEEE80211_C_SHSLOT /* short slot time supported */
| IEEE80211_C_WPA /* capable of WPA1+WPA2 */
| IEEE80211_C_BGSCAN /* capable of bg scanning */
#ifdef notyet
| IEEE80211_C_TXFRAG /* handle tx frags */
| IEEE80211_C_WME /* 802.11e */
#endif
;
bands = 0;
setbit(&bands, IEEE80211_MODE_11B);
setbit(&bands, IEEE80211_MODE_11G);
if (sc->rf_rev == RT2661_RF_5225 || sc->rf_rev == RT2661_RF_5325)
setbit(&bands, IEEE80211_MODE_11A);
ieee80211_init_channels(ic, NULL, &bands);
ieee80211_ifattach(ic);
ic->ic_newassoc = rt2661_newassoc;
ic->ic_node_alloc = rt2661_node_alloc;
#if 0
ic->ic_wme.wme_update = rt2661_wme_update;
#endif
ic->ic_scan_start = rt2661_scan_start;
ic->ic_scan_end = rt2661_scan_end;
ic->ic_set_channel = rt2661_set_channel;
ic->ic_updateslot = rt2661_update_slot;
ic->ic_update_promisc = rt2661_update_promisc;
ic->ic_raw_xmit = rt2661_raw_xmit;
ic->ic_vap_create = rt2661_vap_create;
ic->ic_vap_delete = rt2661_vap_delete;
sc->sc_rates = ieee80211_get_ratetable(ic->ic_curchan);
bpfattach(ifp, DLT_IEEE802_11_RADIO,
sizeof (struct ieee80211_frame) + sizeof (sc->sc_txtap));
sc->sc_rxtap_len = sizeof sc->sc_rxtap;
sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len);
sc->sc_rxtap.wr_ihdr.it_present = htole32(RT2661_RX_RADIOTAP_PRESENT);
sc->sc_txtap_len = sizeof sc->sc_txtap;
sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len);
sc->sc_txtap.wt_ihdr.it_present = htole32(RT2661_TX_RADIOTAP_PRESENT);
#ifdef RAL_DEBUG
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO,
"debug", CTLFLAG_RW, &sc->sc_debug, 0, "debug msgs");
#endif
if (bootverbose)
ieee80211_announce(ic);
return 0;
fail3: rt2661_free_tx_ring(sc, &sc->mgtq);
fail2: while (--ac >= 0)
rt2661_free_tx_ring(sc, &sc->txq[ac]);
fail1: mtx_destroy(&sc->sc_mtx);
if_free(ifp);
return error;
}
int
rt2661_detach(void *xsc)
{
struct rt2661_softc *sc = xsc;
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
RAL_LOCK(sc);
rt2661_stop_locked(sc);
RAL_UNLOCK(sc);
bpfdetach(ifp);
ieee80211_ifdetach(ic);
rt2661_free_tx_ring(sc, &sc->txq[0]);
rt2661_free_tx_ring(sc, &sc->txq[1]);
rt2661_free_tx_ring(sc, &sc->txq[2]);
rt2661_free_tx_ring(sc, &sc->txq[3]);
rt2661_free_tx_ring(sc, &sc->mgtq);
rt2661_free_rx_ring(sc, &sc->rxq);
if_free(ifp);
mtx_destroy(&sc->sc_mtx);
return 0;
}
static struct ieee80211vap *
rt2661_vap_create(struct ieee80211com *ic,
const char name[IFNAMSIZ], int unit, int opmode, int flags,
const uint8_t bssid[IEEE80211_ADDR_LEN],
const uint8_t mac[IEEE80211_ADDR_LEN])
{
struct ifnet *ifp = ic->ic_ifp;
struct rt2661_vap *rvp;
struct ieee80211vap *vap;
switch (opmode) {
case IEEE80211_M_STA:
case IEEE80211_M_IBSS:
case IEEE80211_M_AHDEMO:
case IEEE80211_M_MONITOR:
case IEEE80211_M_HOSTAP:
if (!TAILQ_EMPTY(&ic->ic_vaps)) {
if_printf(ifp, "only 1 vap supported\n");
return NULL;
}
if (opmode == IEEE80211_M_STA)
flags |= IEEE80211_CLONE_NOBEACONS;
break;
case IEEE80211_M_WDS:
if (TAILQ_EMPTY(&ic->ic_vaps) ||
ic->ic_opmode != IEEE80211_M_HOSTAP) {
if_printf(ifp, "wds only supported in ap mode\n");
return NULL;
}
/*
* Silently remove any request for a unique
* bssid; WDS vap's always share the local
* mac address.
*/
flags &= ~IEEE80211_CLONE_BSSID;
break;
default:
if_printf(ifp, "unknown opmode %d\n", opmode);
return NULL;
}
rvp = (struct rt2661_vap *) malloc(sizeof(struct rt2661_vap),
M_80211_VAP, M_NOWAIT | M_ZERO);
if (rvp == NULL)
return NULL;
vap = &rvp->ral_vap;
ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid, mac);
/* override state transition machine */
rvp->ral_newstate = vap->iv_newstate;
vap->iv_newstate = rt2661_newstate;
#if 0
vap->iv_update_beacon = rt2661_beacon_update;
#endif
ieee80211_amrr_init(&rvp->amrr, vap,
IEEE80211_AMRR_MIN_SUCCESS_THRESHOLD,
IEEE80211_AMRR_MAX_SUCCESS_THRESHOLD,
500 /* ms */);
/* complete setup */
ieee80211_vap_attach(vap, ieee80211_media_change, ieee80211_media_status);
if (TAILQ_FIRST(&ic->ic_vaps) == vap)
ic->ic_opmode = opmode;
return vap;
}
static void
rt2661_vap_delete(struct ieee80211vap *vap)
{
struct rt2661_vap *rvp = RT2661_VAP(vap);
ieee80211_amrr_cleanup(&rvp->amrr);
ieee80211_vap_detach(vap);
free(rvp, M_80211_VAP);
}
void
rt2661_shutdown(void *xsc)
{
struct rt2661_softc *sc = xsc;
rt2661_stop(sc);
}
void
rt2661_suspend(void *xsc)
{
struct rt2661_softc *sc = xsc;
rt2661_stop(sc);
}
void
rt2661_resume(void *xsc)
{
struct rt2661_softc *sc = xsc;
struct ifnet *ifp = sc->sc_ifp;
if (ifp->if_flags & IFF_UP)
rt2661_init(sc);
}
static void
rt2661_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
if (error != 0)
return;
KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg));
*(bus_addr_t *)arg = segs[0].ds_addr;
}
static int
rt2661_alloc_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring,
int count)
{
int i, error;
ring->count = count;
ring->queued = 0;
ring->cur = ring->next = ring->stat = 0;
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0,
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
count * RT2661_TX_DESC_SIZE, 1, count * RT2661_TX_DESC_SIZE,
0, NULL, NULL, &ring->desc_dmat);
if (error != 0) {
device_printf(sc->sc_dev, "could not create desc DMA tag\n");
goto fail;
}
error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc,
BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
if (error != 0) {
device_printf(sc->sc_dev, "could not allocate DMA memory\n");
goto fail;
}
error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc,
count * RT2661_TX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr,
0);
if (error != 0) {
device_printf(sc->sc_dev, "could not load desc DMA map\n");
goto fail;
}
ring->data = malloc(count * sizeof (struct rt2661_tx_data), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (ring->data == NULL) {
device_printf(sc->sc_dev, "could not allocate soft data\n");
error = ENOMEM;
goto fail;
}
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0,
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES,
RT2661_MAX_SCATTER, MCLBYTES, 0, NULL, NULL, &ring->data_dmat);
if (error != 0) {
device_printf(sc->sc_dev, "could not create data DMA tag\n");
goto fail;
}
for (i = 0; i < count; i++) {
error = bus_dmamap_create(ring->data_dmat, 0,
&ring->data[i].map);
if (error != 0) {
device_printf(sc->sc_dev, "could not create DMA map\n");
goto fail;
}
}
return 0;
fail: rt2661_free_tx_ring(sc, ring);
return error;
}
static void
rt2661_reset_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring)
{
struct rt2661_tx_desc *desc;
struct rt2661_tx_data *data;
int i;
for (i = 0; i < ring->count; i++) {
desc = &ring->desc[i];
data = &ring->data[i];
if (data->m != NULL) {
bus_dmamap_sync(ring->data_dmat, data->map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(ring->data_dmat, data->map);
m_freem(data->m);
data->m = NULL;
}
if (data->ni != NULL) {
ieee80211_free_node(data->ni);
data->ni = NULL;
}
desc->flags = 0;
}
bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
ring->queued = 0;
ring->cur = ring->next = ring->stat = 0;
}
static void
rt2661_free_tx_ring(struct rt2661_softc *sc, struct rt2661_tx_ring *ring)
{
struct rt2661_tx_data *data;
int i;
if (ring->desc != NULL) {
bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map);
}
if (ring->desc_dmat != NULL)
bus_dma_tag_destroy(ring->desc_dmat);
if (ring->data != NULL) {
for (i = 0; i < ring->count; i++) {
data = &ring->data[i];
if (data->m != NULL) {
bus_dmamap_sync(ring->data_dmat, data->map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(ring->data_dmat, data->map);
m_freem(data->m);
}
if (data->ni != NULL)
ieee80211_free_node(data->ni);
if (data->map != NULL)
bus_dmamap_destroy(ring->data_dmat, data->map);
}
free(ring->data, M_DEVBUF);
}
if (ring->data_dmat != NULL)
bus_dma_tag_destroy(ring->data_dmat);
}
static int
rt2661_alloc_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring,
int count)
{
struct rt2661_rx_desc *desc;
struct rt2661_rx_data *data;
bus_addr_t physaddr;
int i, error;
ring->count = count;
ring->cur = ring->next = 0;
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 4, 0,
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL,
count * RT2661_RX_DESC_SIZE, 1, count * RT2661_RX_DESC_SIZE,
0, NULL, NULL, &ring->desc_dmat);
if (error != 0) {
device_printf(sc->sc_dev, "could not create desc DMA tag\n");
goto fail;
}
error = bus_dmamem_alloc(ring->desc_dmat, (void **)&ring->desc,
BUS_DMA_NOWAIT | BUS_DMA_ZERO, &ring->desc_map);
if (error != 0) {
device_printf(sc->sc_dev, "could not allocate DMA memory\n");
goto fail;
}
error = bus_dmamap_load(ring->desc_dmat, ring->desc_map, ring->desc,
count * RT2661_RX_DESC_SIZE, rt2661_dma_map_addr, &ring->physaddr,
0);
if (error != 0) {
device_printf(sc->sc_dev, "could not load desc DMA map\n");
goto fail;
}
ring->data = malloc(count * sizeof (struct rt2661_rx_data), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (ring->data == NULL) {
device_printf(sc->sc_dev, "could not allocate soft data\n");
error = ENOMEM;
goto fail;
}
/*
* Pre-allocate Rx buffers and populate Rx ring.
*/
error = bus_dma_tag_create(bus_get_dma_tag(sc->sc_dev), 1, 0,
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, MCLBYTES,
1, MCLBYTES, 0, NULL, NULL, &ring->data_dmat);
if (error != 0) {
device_printf(sc->sc_dev, "could not create data DMA tag\n");
goto fail;
}
for (i = 0; i < count; i++) {
desc = &sc->rxq.desc[i];
data = &sc->rxq.data[i];
error = bus_dmamap_create(ring->data_dmat, 0, &data->map);
if (error != 0) {
device_printf(sc->sc_dev, "could not create DMA map\n");
goto fail;
}
data->m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (data->m == NULL) {
device_printf(sc->sc_dev,
"could not allocate rx mbuf\n");
error = ENOMEM;
goto fail;
}
error = bus_dmamap_load(ring->data_dmat, data->map,
mtod(data->m, void *), MCLBYTES, rt2661_dma_map_addr,
&physaddr, 0);
if (error != 0) {
device_printf(sc->sc_dev,
"could not load rx buf DMA map");
goto fail;
}
desc->flags = htole32(RT2661_RX_BUSY);
desc->physaddr = htole32(physaddr);
}
bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
return 0;
fail: rt2661_free_rx_ring(sc, ring);
return error;
}
static void
rt2661_reset_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring)
{
int i;
for (i = 0; i < ring->count; i++)
ring->desc[i].flags = htole32(RT2661_RX_BUSY);
bus_dmamap_sync(ring->desc_dmat, ring->desc_map, BUS_DMASYNC_PREWRITE);
ring->cur = ring->next = 0;
}
static void
rt2661_free_rx_ring(struct rt2661_softc *sc, struct rt2661_rx_ring *ring)
{
struct rt2661_rx_data *data;
int i;
if (ring->desc != NULL) {
bus_dmamap_sync(ring->desc_dmat, ring->desc_map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(ring->desc_dmat, ring->desc_map);
bus_dmamem_free(ring->desc_dmat, ring->desc, ring->desc_map);
}
if (ring->desc_dmat != NULL)
bus_dma_tag_destroy(ring->desc_dmat);
if (ring->data != NULL) {
for (i = 0; i < ring->count; i++) {
data = &ring->data[i];
if (data->m != NULL) {
bus_dmamap_sync(ring->data_dmat, data->map,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(ring->data_dmat, data->map);
m_freem(data->m);
}
if (data->map != NULL)
bus_dmamap_destroy(ring->data_dmat, data->map);
}
free(ring->data, M_DEVBUF);
}
if (ring->data_dmat != NULL)
bus_dma_tag_destroy(ring->data_dmat);
}
static struct ieee80211_node *
rt2661_node_alloc(struct ieee80211vap *vap,
const uint8_t mac[IEEE80211_ADDR_LEN])
{
struct rt2661_node *rn;
rn = malloc(sizeof (struct rt2661_node), M_80211_NODE,
M_NOWAIT | M_ZERO);
return (rn != NULL) ? &rn->ni : NULL;
}
static void
rt2661_newassoc(struct ieee80211_node *ni, int isnew)
{
struct ieee80211vap *vap = ni->ni_vap;
ieee80211_amrr_node_init(&RT2661_VAP(vap)->amrr,
&RT2661_NODE(ni)->amrr, ni);
}
static int
rt2661_newstate(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
{
struct rt2661_vap *rvp = RT2661_VAP(vap);
struct ieee80211com *ic = vap->iv_ic;
struct rt2661_softc *sc = ic->ic_ifp->if_softc;
int error;
if (nstate == IEEE80211_S_INIT && vap->iv_state == IEEE80211_S_RUN) {
uint32_t tmp;
/* abort TSF synchronization */
tmp = RAL_READ(sc, RT2661_TXRX_CSR9);
RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0x00ffffff);
}
error = rvp->ral_newstate(vap, nstate, arg);
if (error == 0 && nstate == IEEE80211_S_RUN) {
struct ieee80211_node *ni = vap->iv_bss;
if (vap->iv_opmode != IEEE80211_M_MONITOR) {
rt2661_enable_mrr(sc);
rt2661_set_txpreamble(sc);
rt2661_set_basicrates(sc, &ni->ni_rates);
rt2661_set_bssid(sc, ni->ni_bssid);
}
if (vap->iv_opmode == IEEE80211_M_HOSTAP ||
vap->iv_opmode == IEEE80211_M_IBSS) {
error = rt2661_prepare_beacon(sc, vap);
if (error != 0)
return error;
}
if (vap->iv_opmode != IEEE80211_M_MONITOR)
rt2661_enable_tsf_sync(sc);
}
return error;
}
/*
* Read 16 bits at address 'addr' from the serial EEPROM (either 93C46 or
* 93C66).
*/
static uint16_t
rt2661_eeprom_read(struct rt2661_softc *sc, uint8_t addr)
{
uint32_t tmp;
uint16_t val;
int n;
/* clock C once before the first command */
RT2661_EEPROM_CTL(sc, 0);
RT2661_EEPROM_CTL(sc, RT2661_S);
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C);
RT2661_EEPROM_CTL(sc, RT2661_S);
/* write start bit (1) */
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D);
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C);
/* write READ opcode (10) */
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D);
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_D | RT2661_C);
RT2661_EEPROM_CTL(sc, RT2661_S);
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C);
/* write address (A5-A0 or A7-A0) */
n = (RAL_READ(sc, RT2661_E2PROM_CSR) & RT2661_93C46) ? 5 : 7;
for (; n >= 0; n--) {
RT2661_EEPROM_CTL(sc, RT2661_S |
(((addr >> n) & 1) << RT2661_SHIFT_D));
RT2661_EEPROM_CTL(sc, RT2661_S |
(((addr >> n) & 1) << RT2661_SHIFT_D) | RT2661_C);
}
RT2661_EEPROM_CTL(sc, RT2661_S);
/* read data Q15-Q0 */
val = 0;
for (n = 15; n >= 0; n--) {
RT2661_EEPROM_CTL(sc, RT2661_S | RT2661_C);
tmp = RAL_READ(sc, RT2661_E2PROM_CSR);
val |= ((tmp & RT2661_Q) >> RT2661_SHIFT_Q) << n;
RT2661_EEPROM_CTL(sc, RT2661_S);
}
RT2661_EEPROM_CTL(sc, 0);
/* clear Chip Select and clock C */
RT2661_EEPROM_CTL(sc, RT2661_S);
RT2661_EEPROM_CTL(sc, 0);
RT2661_EEPROM_CTL(sc, RT2661_C);
return val;
}
static void
rt2661_tx_intr(struct rt2661_softc *sc)
{
struct ifnet *ifp = sc->sc_ifp;
struct rt2661_tx_ring *txq;
struct rt2661_tx_data *data;
struct rt2661_node *rn;
uint32_t val;
int qid, retrycnt;
for (;;) {
struct ieee80211_node *ni;
struct mbuf *m;
val = RAL_READ(sc, RT2661_STA_CSR4);
if (!(val & RT2661_TX_STAT_VALID))
break;
/* retrieve the queue in which this frame was sent */
qid = RT2661_TX_QID(val);
txq = (qid <= 3) ? &sc->txq[qid] : &sc->mgtq;
/* retrieve rate control algorithm context */
data = &txq->data[txq->stat];
m = data->m;
data->m = NULL;
ni = data->ni;
data->ni = NULL;
/* if no frame has been sent, ignore */
if (ni == NULL)
continue;
rn = RT2661_NODE(ni);
switch (RT2661_TX_RESULT(val)) {
case RT2661_TX_SUCCESS:
retrycnt = RT2661_TX_RETRYCNT(val);
DPRINTFN(sc, 10, "data frame sent successfully after "
"%d retries\n", retrycnt);
if (data->rix != IEEE80211_FIXED_RATE_NONE)
ieee80211_amrr_tx_complete(&rn->amrr,
IEEE80211_AMRR_SUCCESS, retrycnt);
ifp->if_opackets++;
break;
case RT2661_TX_RETRY_FAIL:
retrycnt = RT2661_TX_RETRYCNT(val);
DPRINTFN(sc, 9, "%s\n",
"sending data frame failed (too much retries)");
if (data->rix != IEEE80211_FIXED_RATE_NONE)
ieee80211_amrr_tx_complete(&rn->amrr,
IEEE80211_AMRR_FAILURE, retrycnt);
ifp->if_oerrors++;
break;
default:
/* other failure */
device_printf(sc->sc_dev,
"sending data frame failed 0x%08x\n", val);
ifp->if_oerrors++;
}
DPRINTFN(sc, 15, "tx done q=%d idx=%u\n", qid, txq->stat);
txq->queued--;
if (++txq->stat >= txq->count) /* faster than % count */
txq->stat = 0;
if (m->m_flags & M_TXCB)
ieee80211_process_callback(ni, m,
RT2661_TX_RESULT(val) != RT2661_TX_SUCCESS);
m_freem(m);
ieee80211_free_node(ni);
}
sc->sc_tx_timer = 0;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
rt2661_start_locked(ifp);
}
static void
rt2661_tx_dma_intr(struct rt2661_softc *sc, struct rt2661_tx_ring *txq)
{
struct rt2661_tx_desc *desc;
struct rt2661_tx_data *data;
bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_POSTREAD);
for (;;) {
desc = &txq->desc[txq->next];
data = &txq->data[txq->next];
if ((le32toh(desc->flags) & RT2661_TX_BUSY) ||
!(le32toh(desc->flags) & RT2661_TX_VALID))
break;
bus_dmamap_sync(txq->data_dmat, data->map,
BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(txq->data_dmat, data->map);
/* descriptor is no longer valid */
desc->flags &= ~htole32(RT2661_TX_VALID);
DPRINTFN(sc, 15, "tx dma done q=%p idx=%u\n", txq, txq->next);
if (++txq->next >= txq->count) /* faster than % count */
txq->next = 0;
}
bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE);
}
static void
rt2661_rx_intr(struct rt2661_softc *sc)
{
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
struct rt2661_rx_desc *desc;
struct rt2661_rx_data *data;
bus_addr_t physaddr;
struct ieee80211_frame *wh;
struct ieee80211_node *ni;
struct mbuf *mnew, *m;
int error;
bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map,
BUS_DMASYNC_POSTREAD);
for (;;) {
int rssi;
desc = &sc->rxq.desc[sc->rxq.cur];
data = &sc->rxq.data[sc->rxq.cur];
if (le32toh(desc->flags) & RT2661_RX_BUSY)
break;
if ((le32toh(desc->flags) & RT2661_RX_PHY_ERROR) ||
(le32toh(desc->flags) & RT2661_RX_CRC_ERROR)) {
/*
* This should not happen since we did not request
* to receive those frames when we filled TXRX_CSR0.
*/
DPRINTFN(sc, 5, "PHY or CRC error flags 0x%08x\n",
le32toh(desc->flags));
ifp->if_ierrors++;
goto skip;
}
if ((le32toh(desc->flags) & RT2661_RX_CIPHER_MASK) != 0) {
ifp->if_ierrors++;
goto skip;
}
/*
* Try to allocate a new mbuf for this ring element and load it
* before processing the current mbuf. If the ring element
* cannot be loaded, drop the received packet and reuse the old
* mbuf. In the unlikely case that the old mbuf can't be
* reloaded either, explicitly panic.
*/
mnew = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
if (mnew == NULL) {
ifp->if_ierrors++;
goto skip;
}
bus_dmamap_sync(sc->rxq.data_dmat, data->map,
BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->rxq.data_dmat, data->map);
error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
mtod(mnew, void *), MCLBYTES, rt2661_dma_map_addr,
&physaddr, 0);
if (error != 0) {
m_freem(mnew);
/* try to reload the old mbuf */
error = bus_dmamap_load(sc->rxq.data_dmat, data->map,
mtod(data->m, void *), MCLBYTES,
rt2661_dma_map_addr, &physaddr, 0);
if (error != 0) {
/* very unlikely that it will fail... */
panic("%s: could not load old rx mbuf",
device_get_name(sc->sc_dev));
}
ifp->if_ierrors++;
goto skip;
}
/*
* New mbuf successfully loaded, update Rx ring and continue
* processing.
*/
m = data->m;
data->m = mnew;
desc->physaddr = htole32(physaddr);
/* finalize mbuf */
m->m_pkthdr.rcvif = ifp;
m->m_pkthdr.len = m->m_len =
(le32toh(desc->flags) >> 16) & 0xfff;
rssi = rt2661_get_rssi(sc, desc->rssi);
if (bpf_peers_present(ifp->if_bpf)) {
struct rt2661_rx_radiotap_header *tap = &sc->sc_rxtap;
uint32_t tsf_lo, tsf_hi;
/* get timestamp (low and high 32 bits) */
tsf_hi = RAL_READ(sc, RT2661_TXRX_CSR13);
tsf_lo = RAL_READ(sc, RT2661_TXRX_CSR12);
tap->wr_tsf =
htole64(((uint64_t)tsf_hi << 32) | tsf_lo);
tap->wr_flags = 0;
tap->wr_rate = ieee80211_plcp2rate(desc->rate,
(desc->flags & htole32(RT2661_RX_OFDM)) ?
IEEE80211_T_OFDM : IEEE80211_T_CCK);
tap->wr_antsignal = rssi < 0 ? 0 : rssi;
bpf_mtap2(ifp->if_bpf, tap, sc->sc_rxtap_len, m);
}
sc->sc_flags |= RAL_INPUT_RUNNING;
RAL_UNLOCK(sc);
wh = mtod(m, struct ieee80211_frame *);
/* send the frame to the 802.11 layer */
ni = ieee80211_find_rxnode(ic,
(struct ieee80211_frame_min *)wh);
if (ni != NULL) {
/* Error happened during RSSI conversion. */
if (rssi < 0)
rssi = -30; /* XXX ignored by net80211 */
(void) ieee80211_input(ni, m, rssi,
RT2661_NOISE_FLOOR, 0);
ieee80211_free_node(ni);
} else
(void) ieee80211_input_all(ic, m, rssi,
RT2661_NOISE_FLOOR, 0);
RAL_LOCK(sc);
sc->sc_flags &= ~RAL_INPUT_RUNNING;
skip: desc->flags |= htole32(RT2661_RX_BUSY);
DPRINTFN(sc, 15, "rx intr idx=%u\n", sc->rxq.cur);
sc->rxq.cur = (sc->rxq.cur + 1) % RT2661_RX_RING_COUNT;
}
bus_dmamap_sync(sc->rxq.desc_dmat, sc->rxq.desc_map,
BUS_DMASYNC_PREWRITE);
}
/* ARGSUSED */
static void
rt2661_mcu_beacon_expire(struct rt2661_softc *sc)
{
/* do nothing */
}
static void
rt2661_mcu_wakeup(struct rt2661_softc *sc)
{
RAL_WRITE(sc, RT2661_MAC_CSR11, 5 << 16);
RAL_WRITE(sc, RT2661_SOFT_RESET_CSR, 0x7);
RAL_WRITE(sc, RT2661_IO_CNTL_CSR, 0x18);
RAL_WRITE(sc, RT2661_PCI_USEC_CSR, 0x20);
/* send wakeup command to MCU */
rt2661_tx_cmd(sc, RT2661_MCU_CMD_WAKEUP, 0);
}
static void
rt2661_mcu_cmd_intr(struct rt2661_softc *sc)
{
RAL_READ(sc, RT2661_M2H_CMD_DONE_CSR);
RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff);
}
void
rt2661_intr(void *arg)
{
struct rt2661_softc *sc = arg;
struct ifnet *ifp = sc->sc_ifp;
uint32_t r1, r2;
RAL_LOCK(sc);
/* disable MAC and MCU interrupts */
RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffff7f);
RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff);
/* don't re-enable interrupts if we're shutting down */
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
RAL_UNLOCK(sc);
return;
}
r1 = RAL_READ(sc, RT2661_INT_SOURCE_CSR);
RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, r1);
r2 = RAL_READ(sc, RT2661_MCU_INT_SOURCE_CSR);
RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, r2);
if (r1 & RT2661_MGT_DONE)
rt2661_tx_dma_intr(sc, &sc->mgtq);
if (r1 & RT2661_RX_DONE)
rt2661_rx_intr(sc);
if (r1 & RT2661_TX0_DMA_DONE)
rt2661_tx_dma_intr(sc, &sc->txq[0]);
if (r1 & RT2661_TX1_DMA_DONE)
rt2661_tx_dma_intr(sc, &sc->txq[1]);
if (r1 & RT2661_TX2_DMA_DONE)
rt2661_tx_dma_intr(sc, &sc->txq[2]);
if (r1 & RT2661_TX3_DMA_DONE)
rt2661_tx_dma_intr(sc, &sc->txq[3]);
if (r1 & RT2661_TX_DONE)
rt2661_tx_intr(sc);
if (r2 & RT2661_MCU_CMD_DONE)
rt2661_mcu_cmd_intr(sc);
if (r2 & RT2661_MCU_BEACON_EXPIRE)
rt2661_mcu_beacon_expire(sc);
if (r2 & RT2661_MCU_WAKEUP)
rt2661_mcu_wakeup(sc);
/* re-enable MAC and MCU interrupts */
RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10);
RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0);
RAL_UNLOCK(sc);
}
static uint8_t
rt2661_plcp_signal(int rate)
{
switch (rate) {
/* OFDM rates (cf IEEE Std 802.11a-1999, pp. 14 Table 80) */
case 12: return 0xb;
case 18: return 0xf;
case 24: return 0xa;
case 36: return 0xe;
case 48: return 0x9;
case 72: return 0xd;
case 96: return 0x8;
case 108: return 0xc;
/* CCK rates (NB: not IEEE std, device-specific) */
case 2: return 0x0;
case 4: return 0x1;
case 11: return 0x2;
case 22: return 0x3;
}
return 0xff; /* XXX unsupported/unknown rate */
}
static void
rt2661_setup_tx_desc(struct rt2661_softc *sc, struct rt2661_tx_desc *desc,
uint32_t flags, uint16_t xflags, int len, int rate,
const bus_dma_segment_t *segs, int nsegs, int ac)
{
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
uint16_t plcp_length;
int i, remainder;
desc->flags = htole32(flags);
desc->flags |= htole32(len << 16);
desc->flags |= htole32(RT2661_TX_BUSY | RT2661_TX_VALID);
desc->xflags = htole16(xflags);
desc->xflags |= htole16(nsegs << 13);
desc->wme = htole16(
RT2661_QID(ac) |
RT2661_AIFSN(2) |
RT2661_LOGCWMIN(4) |
RT2661_LOGCWMAX(10));
/*
* Remember in which queue this frame was sent. This field is driver
* private data only. It will be made available by the NIC in STA_CSR4
* on Tx interrupts.
*/
desc->qid = ac;
/* setup PLCP fields */
desc->plcp_signal = rt2661_plcp_signal(rate);
desc->plcp_service = 4;
len += IEEE80211_CRC_LEN;
if (ieee80211_rate2phytype(sc->sc_rates, rate) == IEEE80211_T_OFDM) {
desc->flags |= htole32(RT2661_TX_OFDM);
plcp_length = len & 0xfff;
desc->plcp_length_hi = plcp_length >> 6;
desc->plcp_length_lo = plcp_length & 0x3f;
} else {
plcp_length = (16 * len + rate - 1) / rate;
if (rate == 22) {
remainder = (16 * len) % 22;
if (remainder != 0 && remainder < 7)
desc->plcp_service |= RT2661_PLCP_LENGEXT;
}
desc->plcp_length_hi = plcp_length >> 8;
desc->plcp_length_lo = plcp_length & 0xff;
if (rate != 2 && (ic->ic_flags & IEEE80211_F_SHPREAMBLE))
desc->plcp_signal |= 0x08;
}
/* RT2x61 supports scatter with up to 5 segments */
for (i = 0; i < nsegs; i++) {
desc->addr[i] = htole32(segs[i].ds_addr);
desc->len [i] = htole16(segs[i].ds_len);
}
}
static int
rt2661_tx_mgt(struct rt2661_softc *sc, struct mbuf *m0,
struct ieee80211_node *ni)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ieee80211com *ic = ni->ni_ic;
struct ifnet *ifp = sc->sc_ifp;
struct rt2661_tx_desc *desc;
struct rt2661_tx_data *data;
struct ieee80211_frame *wh;
struct ieee80211_key *k;
bus_dma_segment_t segs[RT2661_MAX_SCATTER];
uint16_t dur;
uint32_t flags = 0; /* XXX HWSEQ */
int nsegs, rate, error;
desc = &sc->mgtq.desc[sc->mgtq.cur];
data = &sc->mgtq.data[sc->mgtq.cur];
rate = vap->iv_txparms[ieee80211_chan2mode(ic->ic_curchan)].mgmtrate;
wh = mtod(m0, struct ieee80211_frame *);
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
k = ieee80211_crypto_encap(ni, m0);
if (k == NULL) {
m_freem(m0);
return ENOBUFS;
}
}
error = bus_dmamap_load_mbuf_sg(sc->mgtq.data_dmat, data->map, m0,
segs, &nsegs, 0);
if (error != 0) {
device_printf(sc->sc_dev, "could not map mbuf (error %d)\n",
error);
m_freem(m0);
return error;
}
if (bpf_peers_present(ifp->if_bpf)) {
struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap;
tap->wt_flags = 0;
tap->wt_rate = rate;
bpf_mtap2(ifp->if_bpf, tap, sc->sc_txtap_len, m0);
}
data->m = m0;
data->ni = ni;
/* management frames are not taken into account for amrr */
data->rix = IEEE80211_FIXED_RATE_NONE;
wh = mtod(m0, struct ieee80211_frame *);
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
flags |= RT2661_TX_NEED_ACK;
dur = ieee80211_ack_duration(sc->sc_rates,
rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE);
*(uint16_t *)wh->i_dur = htole16(dur);
/* tell hardware to add timestamp in probe responses */
if ((wh->i_fc[0] &
(IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
(IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP))
flags |= RT2661_TX_TIMESTAMP;
}
rt2661_setup_tx_desc(sc, desc, flags, 0 /* XXX HWSEQ */,
m0->m_pkthdr.len, rate, segs, nsegs, RT2661_QID_MGT);
bus_dmamap_sync(sc->mgtq.data_dmat, data->map, BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(sc->mgtq.desc_dmat, sc->mgtq.desc_map,
BUS_DMASYNC_PREWRITE);
DPRINTFN(sc, 10, "sending mgt frame len=%u idx=%u rate=%u\n",
m0->m_pkthdr.len, sc->mgtq.cur, rate);
/* kick mgt */
sc->mgtq.queued++;
sc->mgtq.cur = (sc->mgtq.cur + 1) % RT2661_MGT_RING_COUNT;
RAL_WRITE(sc, RT2661_TX_CNTL_CSR, RT2661_KICK_MGT);
return 0;
}
static int
rt2661_sendprot(struct rt2661_softc *sc, int ac,
const struct mbuf *m, struct ieee80211_node *ni, int prot, int rate)
{
struct ieee80211com *ic = ni->ni_ic;
struct rt2661_tx_ring *txq = &sc->txq[ac];
const struct ieee80211_frame *wh;
struct rt2661_tx_desc *desc;
struct rt2661_tx_data *data;
struct mbuf *mprot;
int protrate, ackrate, pktlen, flags, isshort, error;
uint16_t dur;
bus_dma_segment_t segs[RT2661_MAX_SCATTER];
int nsegs;
KASSERT(prot == IEEE80211_PROT_RTSCTS || prot == IEEE80211_PROT_CTSONLY,
("protection %d", prot));
wh = mtod(m, const struct ieee80211_frame *);
pktlen = m->m_pkthdr.len + IEEE80211_CRC_LEN;
protrate = ieee80211_ctl_rate(sc->sc_rates, rate);
ackrate = ieee80211_ack_rate(sc->sc_rates, rate);
isshort = (ic->ic_flags & IEEE80211_F_SHPREAMBLE) != 0;
dur = ieee80211_compute_duration(sc->sc_rates, pktlen, rate, isshort)
+ ieee80211_ack_duration(sc->sc_rates, rate, isshort);
flags = RT2661_TX_MORE_FRAG;
if (prot == IEEE80211_PROT_RTSCTS) {
/* NB: CTS is the same size as an ACK */
dur += ieee80211_ack_duration(sc->sc_rates, rate, isshort);
flags |= RT2661_TX_NEED_ACK;
mprot = ieee80211_alloc_rts(ic, wh->i_addr1, wh->i_addr2, dur);
} else {
mprot = ieee80211_alloc_cts(ic, ni->ni_vap->iv_myaddr, dur);
}
if (mprot == NULL) {
/* XXX stat + msg */
return ENOBUFS;
}
data = &txq->data[txq->cur];
desc = &txq->desc[txq->cur];
error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, mprot, segs,
&nsegs, 0);
if (error != 0) {
device_printf(sc->sc_dev,
"could not map mbuf (error %d)\n", error);
m_freem(mprot);
return error;
}
data->m = mprot;
data->ni = ieee80211_ref_node(ni);
/* ctl frames are not taken into account for amrr */
data->rix = IEEE80211_FIXED_RATE_NONE;
rt2661_setup_tx_desc(sc, desc, flags, 0, mprot->m_pkthdr.len,
protrate, segs, 1, ac);
bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE);
txq->queued++;
txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT;
return 0;
}
static int
rt2661_tx_data(struct rt2661_softc *sc, struct mbuf *m0,
struct ieee80211_node *ni, int ac)
{
struct ieee80211vap *vap = ni->ni_vap;
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
struct rt2661_tx_ring *txq = &sc->txq[ac];
struct rt2661_tx_desc *desc;
struct rt2661_tx_data *data;
struct ieee80211_frame *wh;
const struct ieee80211_txparam *tp;
struct ieee80211_key *k;
const struct chanAccParams *cap;
struct mbuf *mnew;
bus_dma_segment_t segs[RT2661_MAX_SCATTER];
uint16_t dur;
uint32_t flags;
int error, nsegs, rate, noack = 0;
wh = mtod(m0, struct ieee80211_frame *);
tp = &vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)];
if (IEEE80211_IS_MULTICAST(wh->i_addr1)) {
rate = tp->mcastrate;
} else if (m0->m_flags & M_EAPOL) {
rate = tp->mgmtrate;
} else if (tp->ucastrate != IEEE80211_FIXED_RATE_NONE) {
rate = tp->ucastrate;
} else {
(void) ieee80211_amrr_choose(ni, &RT2661_NODE(ni)->amrr);
rate = ni->ni_txrate;
}
rate &= IEEE80211_RATE_VAL;
if (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_QOS) {
cap = &ic->ic_wme.wme_chanParams;
noack = cap->cap_wmeParams[ac].wmep_noackPolicy;
}
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
k = ieee80211_crypto_encap(ni, m0);
if (k == NULL) {
m_freem(m0);
return ENOBUFS;
}
/* packet header may have moved, reset our local pointer */
wh = mtod(m0, struct ieee80211_frame *);
}
flags = 0;
if (!IEEE80211_IS_MULTICAST(wh->i_addr1)) {
int prot = IEEE80211_PROT_NONE;
if (m0->m_pkthdr.len + IEEE80211_CRC_LEN > vap->iv_rtsthreshold)
prot = IEEE80211_PROT_RTSCTS;
else if ((ic->ic_flags & IEEE80211_F_USEPROT) &&
ieee80211_rate2phytype(sc->sc_rates, rate) == IEEE80211_T_OFDM)
prot = ic->ic_protmode;
if (prot != IEEE80211_PROT_NONE) {
error = rt2661_sendprot(sc, ac, m0, ni, prot, rate);
if (error) {
m_freem(m0);
return error;
}
flags |= RT2661_TX_LONG_RETRY | RT2661_TX_IFS;
}
}
data = &txq->data[txq->cur];
desc = &txq->desc[txq->cur];
error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0, segs,
&nsegs, 0);
if (error != 0 && error != EFBIG) {
device_printf(sc->sc_dev, "could not map mbuf (error %d)\n",
error);
m_freem(m0);
return error;
}
if (error != 0) {
mnew = m_defrag(m0, M_DONTWAIT);
if (mnew == NULL) {
device_printf(sc->sc_dev,
"could not defragment mbuf\n");
m_freem(m0);
return ENOBUFS;
}
m0 = mnew;
error = bus_dmamap_load_mbuf_sg(txq->data_dmat, data->map, m0,
segs, &nsegs, 0);
if (error != 0) {
device_printf(sc->sc_dev,
"could not map mbuf (error %d)\n", error);
m_freem(m0);
return error;
}
/* packet header have moved, reset our local pointer */
wh = mtod(m0, struct ieee80211_frame *);
}
if (bpf_peers_present(ifp->if_bpf)) {
struct rt2661_tx_radiotap_header *tap = &sc->sc_txtap;
tap->wt_flags = 0;
tap->wt_rate = rate;
tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
bpf_mtap2(ifp->if_bpf, tap, sc->sc_txtap_len, m0);
}
data->m = m0;
data->ni = ni;
/* remember link conditions for rate adaptation algorithm */
if (tp->ucastrate == IEEE80211_FIXED_RATE_NONE) {
data->rix = ni->ni_txrate;
/* XXX probably need last rssi value and not avg */
data->rssi = ic->ic_node_getrssi(ni);
} else
data->rix = IEEE80211_FIXED_RATE_NONE;
if (!noack && !IEEE80211_IS_MULTICAST(wh->i_addr1)) {
flags |= RT2661_TX_NEED_ACK;
dur = ieee80211_ack_duration(sc->sc_rates,
rate, ic->ic_flags & IEEE80211_F_SHPREAMBLE);
*(uint16_t *)wh->i_dur = htole16(dur);
}
rt2661_setup_tx_desc(sc, desc, flags, 0, m0->m_pkthdr.len, rate, segs,
nsegs, ac);
bus_dmamap_sync(txq->data_dmat, data->map, BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(txq->desc_dmat, txq->desc_map, BUS_DMASYNC_PREWRITE);
DPRINTFN(sc, 10, "sending data frame len=%u idx=%u rate=%u\n",
m0->m_pkthdr.len, txq->cur, rate);
/* kick Tx */
txq->queued++;
txq->cur = (txq->cur + 1) % RT2661_TX_RING_COUNT;
RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 1 << ac);
return 0;
}
static void
rt2661_start_locked(struct ifnet *ifp)
{
struct rt2661_softc *sc = ifp->if_softc;
struct mbuf *m;
struct ieee80211_node *ni;
int ac;
RAL_LOCK_ASSERT(sc);
/* prevent management frames from being sent if we're not ready */
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING) || sc->sc_invalid)
return;
for (;;) {
IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
if (m == NULL)
break;
ac = M_WME_GETAC(m);
if (sc->txq[ac].queued >= RT2661_TX_RING_COUNT - 1) {
/* there is no place left in this ring */
IFQ_DRV_PREPEND(&ifp->if_snd, m);
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
break;
}
ni = (struct ieee80211_node *) m->m_pkthdr.rcvif;
m = ieee80211_encap(ni, m);
if (m == NULL) {
ieee80211_free_node(ni);
ifp->if_oerrors++;
continue;
}
if (rt2661_tx_data(sc, m, ni, ac) != 0) {
ieee80211_free_node(ni);
ifp->if_oerrors++;
break;
}
sc->sc_tx_timer = 5;
}
}
static void
rt2661_start(struct ifnet *ifp)
{
struct rt2661_softc *sc = ifp->if_softc;
RAL_LOCK(sc);
rt2661_start_locked(ifp);
RAL_UNLOCK(sc);
}
static int
rt2661_raw_xmit(struct ieee80211_node *ni, struct mbuf *m,
const struct ieee80211_bpf_params *params)
{
struct ieee80211com *ic = ni->ni_ic;
struct ifnet *ifp = ic->ic_ifp;
struct rt2661_softc *sc = ifp->if_softc;
RAL_LOCK(sc);
/* prevent management frames from being sent if we're not ready */
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
RAL_UNLOCK(sc);
m_freem(m);
ieee80211_free_node(ni);
return ENETDOWN;
}
if (sc->mgtq.queued >= RT2661_MGT_RING_COUNT) {
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
RAL_UNLOCK(sc);
m_freem(m);
ieee80211_free_node(ni);
return ENOBUFS; /* XXX */
}
ifp->if_opackets++;
/*
* Legacy path; interpret frame contents to decide
* precisely how to send the frame.
* XXX raw path
*/
if (rt2661_tx_mgt(sc, m, ni) != 0)
goto bad;
sc->sc_tx_timer = 5;
RAL_UNLOCK(sc);
return 0;
bad:
ifp->if_oerrors++;
ieee80211_free_node(ni);
RAL_UNLOCK(sc);
return EIO; /* XXX */
}
static void
rt2661_watchdog(void *arg)
{
struct rt2661_softc *sc = (struct rt2661_softc *)arg;
struct ifnet *ifp = sc->sc_ifp;
RAL_LOCK_ASSERT(sc);
KASSERT(ifp->if_drv_flags & IFF_DRV_RUNNING, ("not running"));
if (sc->sc_invalid) /* card ejected */
return;
if (sc->sc_tx_timer > 0 && --sc->sc_tx_timer == 0) {
if_printf(ifp, "device timeout\n");
rt2661_init_locked(sc);
ifp->if_oerrors++;
/* NB: callout is reset in rt2661_init() */
return;
}
callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc);
}
static int
rt2661_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
struct rt2661_softc *sc = ifp->if_softc;
struct ieee80211com *ic = ifp->if_l2com;
struct ifreq *ifr = (struct ifreq *) data;
int error = 0, startall = 0;
switch (cmd) {
case SIOCSIFFLAGS:
RAL_LOCK(sc);
if (ifp->if_flags & IFF_UP) {
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
rt2661_init_locked(sc);
startall = 1;
} else
rt2661_update_promisc(ifp);
} else {
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
rt2661_stop_locked(sc);
}
RAL_UNLOCK(sc);
if (startall)
ieee80211_start_all(ic);
break;
case SIOCGIFMEDIA:
error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd);
break;
case SIOCGIFADDR:
error = ether_ioctl(ifp, cmd, data);
break;
default:
error = EINVAL;
break;
}
return error;
}
static void
rt2661_bbp_write(struct rt2661_softc *sc, uint8_t reg, uint8_t val)
{
uint32_t tmp;
int ntries;
for (ntries = 0; ntries < 100; ntries++) {
if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY))
break;
DELAY(1);
}
if (ntries == 100) {
device_printf(sc->sc_dev, "could not write to BBP\n");
return;
}
tmp = RT2661_BBP_BUSY | (reg & 0x7f) << 8 | val;
RAL_WRITE(sc, RT2661_PHY_CSR3, tmp);
DPRINTFN(sc, 15, "BBP R%u <- 0x%02x\n", reg, val);
}
static uint8_t
rt2661_bbp_read(struct rt2661_softc *sc, uint8_t reg)
{
uint32_t val;
int ntries;
for (ntries = 0; ntries < 100; ntries++) {
if (!(RAL_READ(sc, RT2661_PHY_CSR3) & RT2661_BBP_BUSY))
break;
DELAY(1);
}
if (ntries == 100) {
device_printf(sc->sc_dev, "could not read from BBP\n");
return 0;
}
val = RT2661_BBP_BUSY | RT2661_BBP_READ | reg << 8;
RAL_WRITE(sc, RT2661_PHY_CSR3, val);
for (ntries = 0; ntries < 100; ntries++) {
val = RAL_READ(sc, RT2661_PHY_CSR3);
if (!(val & RT2661_BBP_BUSY))
return val & 0xff;
DELAY(1);
}
device_printf(sc->sc_dev, "could not read from BBP\n");
return 0;
}
static void
rt2661_rf_write(struct rt2661_softc *sc, uint8_t reg, uint32_t val)
{
uint32_t tmp;
int ntries;
for (ntries = 0; ntries < 100; ntries++) {
if (!(RAL_READ(sc, RT2661_PHY_CSR4) & RT2661_RF_BUSY))
break;
DELAY(1);
}
if (ntries == 100) {
device_printf(sc->sc_dev, "could not write to RF\n");
return;
}
tmp = RT2661_RF_BUSY | RT2661_RF_21BIT | (val & 0x1fffff) << 2 |
(reg & 3);
RAL_WRITE(sc, RT2661_PHY_CSR4, tmp);
/* remember last written value in sc */
sc->rf_regs[reg] = val;
DPRINTFN(sc, 15, "RF R[%u] <- 0x%05x\n", reg & 3, val & 0x1fffff);
}
static int
rt2661_tx_cmd(struct rt2661_softc *sc, uint8_t cmd, uint16_t arg)
{
if (RAL_READ(sc, RT2661_H2M_MAILBOX_CSR) & RT2661_H2M_BUSY)
return EIO; /* there is already a command pending */
RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR,
RT2661_H2M_BUSY | RT2661_TOKEN_NO_INTR << 16 | arg);
RAL_WRITE(sc, RT2661_HOST_CMD_CSR, RT2661_KICK_CMD | cmd);
return 0;
}
static void
rt2661_select_antenna(struct rt2661_softc *sc)
{
uint8_t bbp4, bbp77;
uint32_t tmp;
bbp4 = rt2661_bbp_read(sc, 4);
bbp77 = rt2661_bbp_read(sc, 77);
/* TBD */
/* make sure Rx is disabled before switching antenna */
tmp = RAL_READ(sc, RT2661_TXRX_CSR0);
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX);
rt2661_bbp_write(sc, 4, bbp4);
rt2661_bbp_write(sc, 77, bbp77);
/* restore Rx filter */
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp);
}
/*
* Enable multi-rate retries for frames sent at OFDM rates.
* In 802.11b/g mode, allow fallback to CCK rates.
*/
static void
rt2661_enable_mrr(struct rt2661_softc *sc)
{
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
uint32_t tmp;
tmp = RAL_READ(sc, RT2661_TXRX_CSR4);
tmp &= ~RT2661_MRR_CCK_FALLBACK;
if (!IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan))
tmp |= RT2661_MRR_CCK_FALLBACK;
tmp |= RT2661_MRR_ENABLED;
RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp);
}
static void
rt2661_set_txpreamble(struct rt2661_softc *sc)
{
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
uint32_t tmp;
tmp = RAL_READ(sc, RT2661_TXRX_CSR4);
tmp &= ~RT2661_SHORT_PREAMBLE;
if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
tmp |= RT2661_SHORT_PREAMBLE;
RAL_WRITE(sc, RT2661_TXRX_CSR4, tmp);
}
static void
rt2661_set_basicrates(struct rt2661_softc *sc,
const struct ieee80211_rateset *rs)
{
#define RV(r) ((r) & IEEE80211_RATE_VAL)
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
uint32_t mask = 0;
uint8_t rate;
int i, j;
for (i = 0; i < rs->rs_nrates; i++) {
rate = rs->rs_rates[i];
if (!(rate & IEEE80211_RATE_BASIC))
continue;
/*
* Find h/w rate index. We know it exists because the rate
* set has already been negotiated.
*/
for (j = 0; ic->ic_sup_rates[IEEE80211_MODE_11G].rs_rates[j] != RV(rate); j++);
mask |= 1 << j;
}
RAL_WRITE(sc, RT2661_TXRX_CSR5, mask);
DPRINTF(sc, "Setting basic rate mask to 0x%x\n", mask);
#undef RV
}
/*
* Reprogram MAC/BBP to switch to a new band. Values taken from the reference
* driver.
*/
static void
rt2661_select_band(struct rt2661_softc *sc, struct ieee80211_channel *c)
{
uint8_t bbp17, bbp35, bbp96, bbp97, bbp98, bbp104;
uint32_t tmp;
/* update all BBP registers that depend on the band */
bbp17 = 0x20; bbp96 = 0x48; bbp104 = 0x2c;
bbp35 = 0x50; bbp97 = 0x48; bbp98 = 0x48;
if (IEEE80211_IS_CHAN_5GHZ(c)) {
bbp17 += 0x08; bbp96 += 0x10; bbp104 += 0x0c;
bbp35 += 0x10; bbp97 += 0x10; bbp98 += 0x10;
}
if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) ||
(IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) {
bbp17 += 0x10; bbp96 += 0x10; bbp104 += 0x10;
}
rt2661_bbp_write(sc, 17, bbp17);
rt2661_bbp_write(sc, 96, bbp96);
rt2661_bbp_write(sc, 104, bbp104);
if ((IEEE80211_IS_CHAN_2GHZ(c) && sc->ext_2ghz_lna) ||
(IEEE80211_IS_CHAN_5GHZ(c) && sc->ext_5ghz_lna)) {
rt2661_bbp_write(sc, 75, 0x80);
rt2661_bbp_write(sc, 86, 0x80);
rt2661_bbp_write(sc, 88, 0x80);
}
rt2661_bbp_write(sc, 35, bbp35);
rt2661_bbp_write(sc, 97, bbp97);
rt2661_bbp_write(sc, 98, bbp98);
tmp = RAL_READ(sc, RT2661_PHY_CSR0);
tmp &= ~(RT2661_PA_PE_2GHZ | RT2661_PA_PE_5GHZ);
if (IEEE80211_IS_CHAN_2GHZ(c))
tmp |= RT2661_PA_PE_2GHZ;
else
tmp |= RT2661_PA_PE_5GHZ;
RAL_WRITE(sc, RT2661_PHY_CSR0, tmp);
}
static void
rt2661_set_chan(struct rt2661_softc *sc, struct ieee80211_channel *c)
{
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
const struct rfprog *rfprog;
uint8_t bbp3, bbp94 = RT2661_BBPR94_DEFAULT;
int8_t power;
u_int i, chan;
chan = ieee80211_chan2ieee(ic, c);
KASSERT(chan != 0 && chan != IEEE80211_CHAN_ANY, ("chan 0x%x", chan));
sc->sc_rates = ieee80211_get_ratetable(c);
/* select the appropriate RF settings based on what EEPROM says */
rfprog = (sc->rfprog == 0) ? rt2661_rf5225_1 : rt2661_rf5225_2;
/* find the settings for this channel (we know it exists) */
for (i = 0; rfprog[i].chan != chan; i++);
power = sc->txpow[i];
if (power < 0) {
bbp94 += power;
power = 0;
} else if (power > 31) {
bbp94 += power - 31;
power = 31;
}
/*
* If we are switching from the 2GHz band to the 5GHz band or
* vice-versa, BBP registers need to be reprogrammed.
*/
if (c->ic_flags != sc->sc_curchan->ic_flags) {
rt2661_select_band(sc, c);
rt2661_select_antenna(sc);
}
sc->sc_curchan = c;
rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1);
rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2);
rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7);
rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10);
DELAY(200);
rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1);
rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2);
rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7 | 1);
rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10);
DELAY(200);
rt2661_rf_write(sc, RAL_RF1, rfprog[i].r1);
rt2661_rf_write(sc, RAL_RF2, rfprog[i].r2);
rt2661_rf_write(sc, RAL_RF3, rfprog[i].r3 | power << 7);
rt2661_rf_write(sc, RAL_RF4, rfprog[i].r4 | sc->rffreq << 10);
/* enable smart mode for MIMO-capable RFs */
bbp3 = rt2661_bbp_read(sc, 3);
bbp3 &= ~RT2661_SMART_MODE;
if (sc->rf_rev == RT2661_RF_5325 || sc->rf_rev == RT2661_RF_2529)
bbp3 |= RT2661_SMART_MODE;
rt2661_bbp_write(sc, 3, bbp3);
if (bbp94 != RT2661_BBPR94_DEFAULT)
rt2661_bbp_write(sc, 94, bbp94);
/* 5GHz radio needs a 1ms delay here */
if (IEEE80211_IS_CHAN_5GHZ(c))
DELAY(1000);
}
static void
rt2661_set_bssid(struct rt2661_softc *sc, const uint8_t *bssid)
{
uint32_t tmp;
tmp = bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24;
RAL_WRITE(sc, RT2661_MAC_CSR4, tmp);
tmp = bssid[4] | bssid[5] << 8 | RT2661_ONE_BSSID << 16;
RAL_WRITE(sc, RT2661_MAC_CSR5, tmp);
}
static void
rt2661_set_macaddr(struct rt2661_softc *sc, const uint8_t *addr)
{
uint32_t tmp;
tmp = addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24;
RAL_WRITE(sc, RT2661_MAC_CSR2, tmp);
tmp = addr[4] | addr[5] << 8;
RAL_WRITE(sc, RT2661_MAC_CSR3, tmp);
}
static void
rt2661_update_promisc(struct ifnet *ifp)
{
struct rt2661_softc *sc = ifp->if_softc;
uint32_t tmp;
tmp = RAL_READ(sc, RT2661_TXRX_CSR0);
tmp &= ~RT2661_DROP_NOT_TO_ME;
if (!(ifp->if_flags & IFF_PROMISC))
tmp |= RT2661_DROP_NOT_TO_ME;
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp);
DPRINTF(sc, "%s promiscuous mode\n", (ifp->if_flags & IFF_PROMISC) ?
"entering" : "leaving");
}
/*
* Update QoS (802.11e) settings for each h/w Tx ring.
*/
static int
rt2661_wme_update(struct ieee80211com *ic)
{
struct rt2661_softc *sc = ic->ic_ifp->if_softc;
const struct wmeParams *wmep;
wmep = ic->ic_wme.wme_chanParams.cap_wmeParams;
/* XXX: not sure about shifts. */
/* XXX: the reference driver plays with AC_VI settings too. */
/* update TxOp */
RAL_WRITE(sc, RT2661_AC_TXOP_CSR0,
wmep[WME_AC_BE].wmep_txopLimit << 16 |
wmep[WME_AC_BK].wmep_txopLimit);
RAL_WRITE(sc, RT2661_AC_TXOP_CSR1,
wmep[WME_AC_VI].wmep_txopLimit << 16 |
wmep[WME_AC_VO].wmep_txopLimit);
/* update CWmin */
RAL_WRITE(sc, RT2661_CWMIN_CSR,
wmep[WME_AC_BE].wmep_logcwmin << 12 |
wmep[WME_AC_BK].wmep_logcwmin << 8 |
wmep[WME_AC_VI].wmep_logcwmin << 4 |
wmep[WME_AC_VO].wmep_logcwmin);
/* update CWmax */
RAL_WRITE(sc, RT2661_CWMAX_CSR,
wmep[WME_AC_BE].wmep_logcwmax << 12 |
wmep[WME_AC_BK].wmep_logcwmax << 8 |
wmep[WME_AC_VI].wmep_logcwmax << 4 |
wmep[WME_AC_VO].wmep_logcwmax);
/* update Aifsn */
RAL_WRITE(sc, RT2661_AIFSN_CSR,
wmep[WME_AC_BE].wmep_aifsn << 12 |
wmep[WME_AC_BK].wmep_aifsn << 8 |
wmep[WME_AC_VI].wmep_aifsn << 4 |
wmep[WME_AC_VO].wmep_aifsn);
return 0;
}
static void
rt2661_update_slot(struct ifnet *ifp)
{
struct rt2661_softc *sc = ifp->if_softc;
struct ieee80211com *ic = ifp->if_l2com;
uint8_t slottime;
uint32_t tmp;
slottime = (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20;
tmp = RAL_READ(sc, RT2661_MAC_CSR9);
tmp = (tmp & ~0xff) | slottime;
RAL_WRITE(sc, RT2661_MAC_CSR9, tmp);
}
static const char *
rt2661_get_rf(int rev)
{
switch (rev) {
case RT2661_RF_5225: return "RT5225";
case RT2661_RF_5325: return "RT5325 (MIMO XR)";
case RT2661_RF_2527: return "RT2527";
case RT2661_RF_2529: return "RT2529 (MIMO XR)";
default: return "unknown";
}
}
static void
rt2661_read_eeprom(struct rt2661_softc *sc, struct ieee80211com *ic)
{
uint16_t val;
int i;
/* read MAC address */
val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC01);
ic->ic_myaddr[0] = val & 0xff;
ic->ic_myaddr[1] = val >> 8;
val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC23);
ic->ic_myaddr[2] = val & 0xff;
ic->ic_myaddr[3] = val >> 8;
val = rt2661_eeprom_read(sc, RT2661_EEPROM_MAC45);
ic->ic_myaddr[4] = val & 0xff;
ic->ic_myaddr[5] = val >> 8;
val = rt2661_eeprom_read(sc, RT2661_EEPROM_ANTENNA);
/* XXX: test if different from 0xffff? */
sc->rf_rev = (val >> 11) & 0x1f;
sc->hw_radio = (val >> 10) & 0x1;
sc->rx_ant = (val >> 4) & 0x3;
sc->tx_ant = (val >> 2) & 0x3;
sc->nb_ant = val & 0x3;
DPRINTF(sc, "RF revision=%d\n", sc->rf_rev);
val = rt2661_eeprom_read(sc, RT2661_EEPROM_CONFIG2);
sc->ext_5ghz_lna = (val >> 6) & 0x1;
sc->ext_2ghz_lna = (val >> 4) & 0x1;
DPRINTF(sc, "External 2GHz LNA=%d\nExternal 5GHz LNA=%d\n",
sc->ext_2ghz_lna, sc->ext_5ghz_lna);
val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_2GHZ_OFFSET);
if ((val & 0xff) != 0xff)
sc->rssi_2ghz_corr = (int8_t)(val & 0xff); /* signed */
/* Only [-10, 10] is valid */
if (sc->rssi_2ghz_corr < -10 || sc->rssi_2ghz_corr > 10)
sc->rssi_2ghz_corr = 0;
val = rt2661_eeprom_read(sc, RT2661_EEPROM_RSSI_5GHZ_OFFSET);
if ((val & 0xff) != 0xff)
sc->rssi_5ghz_corr = (int8_t)(val & 0xff); /* signed */
/* Only [-10, 10] is valid */
if (sc->rssi_5ghz_corr < -10 || sc->rssi_5ghz_corr > 10)
sc->rssi_5ghz_corr = 0;
/* adjust RSSI correction for external low-noise amplifier */
if (sc->ext_2ghz_lna)
sc->rssi_2ghz_corr -= 14;
if (sc->ext_5ghz_lna)
sc->rssi_5ghz_corr -= 14;
DPRINTF(sc, "RSSI 2GHz corr=%d\nRSSI 5GHz corr=%d\n",
sc->rssi_2ghz_corr, sc->rssi_5ghz_corr);
val = rt2661_eeprom_read(sc, RT2661_EEPROM_FREQ_OFFSET);
if ((val >> 8) != 0xff)
sc->rfprog = (val >> 8) & 0x3;
if ((val & 0xff) != 0xff)
sc->rffreq = val & 0xff;
DPRINTF(sc, "RF prog=%d\nRF freq=%d\n", sc->rfprog, sc->rffreq);
/* read Tx power for all a/b/g channels */
for (i = 0; i < 19; i++) {
val = rt2661_eeprom_read(sc, RT2661_EEPROM_TXPOWER + i);
sc->txpow[i * 2] = (int8_t)(val >> 8); /* signed */
DPRINTF(sc, "Channel=%d Tx power=%d\n",
rt2661_rf5225_1[i * 2].chan, sc->txpow[i * 2]);
sc->txpow[i * 2 + 1] = (int8_t)(val & 0xff); /* signed */
DPRINTF(sc, "Channel=%d Tx power=%d\n",
rt2661_rf5225_1[i * 2 + 1].chan, sc->txpow[i * 2 + 1]);
}
/* read vendor-specific BBP values */
for (i = 0; i < 16; i++) {
val = rt2661_eeprom_read(sc, RT2661_EEPROM_BBP_BASE + i);
if (val == 0 || val == 0xffff)
continue; /* skip invalid entries */
sc->bbp_prom[i].reg = val >> 8;
sc->bbp_prom[i].val = val & 0xff;
DPRINTF(sc, "BBP R%d=%02x\n", sc->bbp_prom[i].reg,
sc->bbp_prom[i].val);
}
}
static int
rt2661_bbp_init(struct rt2661_softc *sc)
{
#define N(a) (sizeof (a) / sizeof ((a)[0]))
int i, ntries;
uint8_t val;
/* wait for BBP to be ready */
for (ntries = 0; ntries < 100; ntries++) {
val = rt2661_bbp_read(sc, 0);
if (val != 0 && val != 0xff)
break;
DELAY(100);
}
if (ntries == 100) {
device_printf(sc->sc_dev, "timeout waiting for BBP\n");
return EIO;
}
/* initialize BBP registers to default values */
for (i = 0; i < N(rt2661_def_bbp); i++) {
rt2661_bbp_write(sc, rt2661_def_bbp[i].reg,
rt2661_def_bbp[i].val);
}
/* write vendor-specific BBP values (from EEPROM) */
for (i = 0; i < 16; i++) {
if (sc->bbp_prom[i].reg == 0)
continue;
rt2661_bbp_write(sc, sc->bbp_prom[i].reg, sc->bbp_prom[i].val);
}
return 0;
#undef N
}
static void
rt2661_init_locked(struct rt2661_softc *sc)
{
#define N(a) (sizeof (a) / sizeof ((a)[0]))
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
uint32_t tmp, sta[3];
int i, error, ntries;
RAL_LOCK_ASSERT(sc);
if ((sc->sc_flags & RAL_FW_LOADED) == 0) {
error = rt2661_load_microcode(sc);
if (error != 0) {
if_printf(ifp,
"%s: could not load 8051 microcode, error %d\n",
__func__, error);
return;
}
sc->sc_flags |= RAL_FW_LOADED;
}
rt2661_stop_locked(sc);
/* initialize Tx rings */
RAL_WRITE(sc, RT2661_AC1_BASE_CSR, sc->txq[1].physaddr);
RAL_WRITE(sc, RT2661_AC0_BASE_CSR, sc->txq[0].physaddr);
RAL_WRITE(sc, RT2661_AC2_BASE_CSR, sc->txq[2].physaddr);
RAL_WRITE(sc, RT2661_AC3_BASE_CSR, sc->txq[3].physaddr);
/* initialize Mgt ring */
RAL_WRITE(sc, RT2661_MGT_BASE_CSR, sc->mgtq.physaddr);
/* initialize Rx ring */
RAL_WRITE(sc, RT2661_RX_BASE_CSR, sc->rxq.physaddr);
/* initialize Tx rings sizes */
RAL_WRITE(sc, RT2661_TX_RING_CSR0,
RT2661_TX_RING_COUNT << 24 |
RT2661_TX_RING_COUNT << 16 |
RT2661_TX_RING_COUNT << 8 |
RT2661_TX_RING_COUNT);
RAL_WRITE(sc, RT2661_TX_RING_CSR1,
RT2661_TX_DESC_WSIZE << 16 |
RT2661_TX_RING_COUNT << 8 | /* XXX: HCCA ring unused */
RT2661_MGT_RING_COUNT);
/* initialize Rx rings */
RAL_WRITE(sc, RT2661_RX_RING_CSR,
RT2661_RX_DESC_BACK << 16 |
RT2661_RX_DESC_WSIZE << 8 |
RT2661_RX_RING_COUNT);
/* XXX: some magic here */
RAL_WRITE(sc, RT2661_TX_DMA_DST_CSR, 0xaa);
/* load base addresses of all 5 Tx rings (4 data + 1 mgt) */
RAL_WRITE(sc, RT2661_LOAD_TX_RING_CSR, 0x1f);
/* load base address of Rx ring */
RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 2);
/* initialize MAC registers to default values */
for (i = 0; i < N(rt2661_def_mac); i++)
RAL_WRITE(sc, rt2661_def_mac[i].reg, rt2661_def_mac[i].val);
IEEE80211_ADDR_COPY(ic->ic_myaddr, IF_LLADDR(ifp));
rt2661_set_macaddr(sc, ic->ic_myaddr);
/* set host ready */
RAL_WRITE(sc, RT2661_MAC_CSR1, 3);
RAL_WRITE(sc, RT2661_MAC_CSR1, 0);
/* wait for BBP/RF to wakeup */
for (ntries = 0; ntries < 1000; ntries++) {
if (RAL_READ(sc, RT2661_MAC_CSR12) & 8)
break;
DELAY(1000);
}
if (ntries == 1000) {
printf("timeout waiting for BBP/RF to wakeup\n");
rt2661_stop_locked(sc);
return;
}
if (rt2661_bbp_init(sc) != 0) {
rt2661_stop_locked(sc);
return;
}
/* select default channel */
sc->sc_curchan = ic->ic_curchan;
rt2661_select_band(sc, sc->sc_curchan);
rt2661_select_antenna(sc);
rt2661_set_chan(sc, sc->sc_curchan);
/* update Rx filter */
tmp = RAL_READ(sc, RT2661_TXRX_CSR0) & 0xffff;
tmp |= RT2661_DROP_PHY_ERROR | RT2661_DROP_CRC_ERROR;
if (ic->ic_opmode != IEEE80211_M_MONITOR) {
tmp |= RT2661_DROP_CTL | RT2661_DROP_VER_ERROR |
RT2661_DROP_ACKCTS;
if (ic->ic_opmode != IEEE80211_M_HOSTAP)
tmp |= RT2661_DROP_TODS;
if (!(ifp->if_flags & IFF_PROMISC))
tmp |= RT2661_DROP_NOT_TO_ME;
}
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp);
/* clear STA registers */
RAL_READ_REGION_4(sc, RT2661_STA_CSR0, sta, N(sta));
/* initialize ASIC */
RAL_WRITE(sc, RT2661_MAC_CSR1, 4);
/* clear any pending interrupt */
RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff);
/* enable interrupts */
RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0x0000ff10);
RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0);
/* kick Rx */
RAL_WRITE(sc, RT2661_RX_CNTL_CSR, 1);
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
ifp->if_drv_flags |= IFF_DRV_RUNNING;
callout_reset(&sc->watchdog_ch, hz, rt2661_watchdog, sc);
#undef N
}
static void
rt2661_init(void *priv)
{
struct rt2661_softc *sc = priv;
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
RAL_LOCK(sc);
rt2661_init_locked(sc);
RAL_UNLOCK(sc);
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
ieee80211_start_all(ic); /* start all vap's */
}
void
rt2661_stop_locked(struct rt2661_softc *sc)
{
struct ifnet *ifp = sc->sc_ifp;
uint32_t tmp;
volatile int *flags = &sc->sc_flags;
while (*flags & RAL_INPUT_RUNNING)
msleep(sc, &sc->sc_mtx, 0, "ralrunning", hz/10);
callout_stop(&sc->watchdog_ch);
sc->sc_tx_timer = 0;
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
/* abort Tx (for all 5 Tx rings) */
RAL_WRITE(sc, RT2661_TX_CNTL_CSR, 0x1f << 16);
/* disable Rx (value remains after reset!) */
tmp = RAL_READ(sc, RT2661_TXRX_CSR0);
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX);
/* reset ASIC */
RAL_WRITE(sc, RT2661_MAC_CSR1, 3);
RAL_WRITE(sc, RT2661_MAC_CSR1, 0);
/* disable interrupts */
RAL_WRITE(sc, RT2661_INT_MASK_CSR, 0xffffffff);
RAL_WRITE(sc, RT2661_MCU_INT_MASK_CSR, 0xffffffff);
/* clear any pending interrupt */
RAL_WRITE(sc, RT2661_INT_SOURCE_CSR, 0xffffffff);
RAL_WRITE(sc, RT2661_MCU_INT_SOURCE_CSR, 0xffffffff);
/* reset Tx and Rx rings */
rt2661_reset_tx_ring(sc, &sc->txq[0]);
rt2661_reset_tx_ring(sc, &sc->txq[1]);
rt2661_reset_tx_ring(sc, &sc->txq[2]);
rt2661_reset_tx_ring(sc, &sc->txq[3]);
rt2661_reset_tx_ring(sc, &sc->mgtq);
rt2661_reset_rx_ring(sc, &sc->rxq);
}
}
void
rt2661_stop(void *priv)
{
struct rt2661_softc *sc = priv;
RAL_LOCK(sc);
rt2661_stop_locked(sc);
RAL_UNLOCK(sc);
}
static int
rt2661_load_microcode(struct rt2661_softc *sc)
{
struct ifnet *ifp = sc->sc_ifp;
const struct firmware *fp;
const char *imagename;
int ntries, error;
RAL_LOCK_ASSERT(sc);
switch (sc->sc_id) {
case 0x0301: imagename = "rt2561sfw"; break;
case 0x0302: imagename = "rt2561fw"; break;
case 0x0401: imagename = "rt2661fw"; break;
default:
if_printf(ifp, "%s: unexpected pci device id 0x%x, "
"don't know how to retrieve firmware\n",
__func__, sc->sc_id);
return EINVAL;
}
RAL_UNLOCK(sc);
fp = firmware_get(imagename);
RAL_LOCK(sc);
if (fp == NULL) {
if_printf(ifp, "%s: unable to retrieve firmware image %s\n",
__func__, imagename);
return EINVAL;
}
/*
* Load 8051 microcode into NIC.
*/
/* reset 8051 */
RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET);
/* cancel any pending Host to MCU command */
RAL_WRITE(sc, RT2661_H2M_MAILBOX_CSR, 0);
RAL_WRITE(sc, RT2661_M2H_CMD_DONE_CSR, 0xffffffff);
RAL_WRITE(sc, RT2661_HOST_CMD_CSR, 0);
/* write 8051's microcode */
RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET | RT2661_MCU_SEL);
RAL_WRITE_REGION_1(sc, RT2661_MCU_CODE_BASE, fp->data, fp->datasize);
RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, RT2661_MCU_RESET);
/* kick 8051's ass */
RAL_WRITE(sc, RT2661_MCU_CNTL_CSR, 0);
/* wait for 8051 to initialize */
for (ntries = 0; ntries < 500; ntries++) {
if (RAL_READ(sc, RT2661_MCU_CNTL_CSR) & RT2661_MCU_READY)
break;
DELAY(100);
}
if (ntries == 500) {
if_printf(ifp, "%s: timeout waiting for MCU to initialize\n",
__func__);
error = EIO;
} else
error = 0;
firmware_put(fp, FIRMWARE_UNLOAD);
return error;
}
#ifdef notyet
/*
* Dynamically tune Rx sensitivity (BBP register 17) based on average RSSI and
* false CCA count. This function is called periodically (every seconds) when
* in the RUN state. Values taken from the reference driver.
*/
static void
rt2661_rx_tune(struct rt2661_softc *sc)
{
uint8_t bbp17;
uint16_t cca;
int lo, hi, dbm;
/*
* Tuning range depends on operating band and on the presence of an
* external low-noise amplifier.
*/
lo = 0x20;
if (IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan))
lo += 0x08;
if ((IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan) && sc->ext_2ghz_lna) ||
(IEEE80211_IS_CHAN_5GHZ(sc->sc_curchan) && sc->ext_5ghz_lna))
lo += 0x10;
hi = lo + 0x20;
/* retrieve false CCA count since last call (clear on read) */
cca = RAL_READ(sc, RT2661_STA_CSR1) & 0xffff;
if (dbm >= -35) {
bbp17 = 0x60;
} else if (dbm >= -58) {
bbp17 = hi;
} else if (dbm >= -66) {
bbp17 = lo + 0x10;
} else if (dbm >= -74) {
bbp17 = lo + 0x08;
} else {
/* RSSI < -74dBm, tune using false CCA count */
bbp17 = sc->bbp17; /* current value */
hi -= 2 * (-74 - dbm);
if (hi < lo)
hi = lo;
if (bbp17 > hi) {
bbp17 = hi;
} else if (cca > 512) {
if (++bbp17 > hi)
bbp17 = hi;
} else if (cca < 100) {
if (--bbp17 < lo)
bbp17 = lo;
}
}
if (bbp17 != sc->bbp17) {
rt2661_bbp_write(sc, 17, bbp17);
sc->bbp17 = bbp17;
}
}
/*
* Enter/Leave radar detection mode.
* This is for 802.11h additional regulatory domains.
*/
static void
rt2661_radar_start(struct rt2661_softc *sc)
{
uint32_t tmp;
/* disable Rx */
tmp = RAL_READ(sc, RT2661_TXRX_CSR0);
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp | RT2661_DISABLE_RX);
rt2661_bbp_write(sc, 82, 0x20);
rt2661_bbp_write(sc, 83, 0x00);
rt2661_bbp_write(sc, 84, 0x40);
/* save current BBP registers values */
sc->bbp18 = rt2661_bbp_read(sc, 18);
sc->bbp21 = rt2661_bbp_read(sc, 21);
sc->bbp22 = rt2661_bbp_read(sc, 22);
sc->bbp16 = rt2661_bbp_read(sc, 16);
sc->bbp17 = rt2661_bbp_read(sc, 17);
sc->bbp64 = rt2661_bbp_read(sc, 64);
rt2661_bbp_write(sc, 18, 0xff);
rt2661_bbp_write(sc, 21, 0x3f);
rt2661_bbp_write(sc, 22, 0x3f);
rt2661_bbp_write(sc, 16, 0xbd);
rt2661_bbp_write(sc, 17, sc->ext_5ghz_lna ? 0x44 : 0x34);
rt2661_bbp_write(sc, 64, 0x21);
/* restore Rx filter */
RAL_WRITE(sc, RT2661_TXRX_CSR0, tmp);
}
static int
rt2661_radar_stop(struct rt2661_softc *sc)
{
uint8_t bbp66;
/* read radar detection result */
bbp66 = rt2661_bbp_read(sc, 66);
/* restore BBP registers values */
rt2661_bbp_write(sc, 16, sc->bbp16);
rt2661_bbp_write(sc, 17, sc->bbp17);
rt2661_bbp_write(sc, 18, sc->bbp18);
rt2661_bbp_write(sc, 21, sc->bbp21);
rt2661_bbp_write(sc, 22, sc->bbp22);
rt2661_bbp_write(sc, 64, sc->bbp64);
return bbp66 == 1;
}
#endif
static int
rt2661_prepare_beacon(struct rt2661_softc *sc, struct ieee80211vap *vap)
{
struct ieee80211com *ic = vap->iv_ic;
struct ieee80211_beacon_offsets bo;
struct rt2661_tx_desc desc;
struct mbuf *m0;
int rate;
m0 = ieee80211_beacon_alloc(vap->iv_bss, &bo);
if (m0 == NULL) {
device_printf(sc->sc_dev, "could not allocate beacon frame\n");
return ENOBUFS;
}
/* send beacons at the lowest available rate */
rate = IEEE80211_IS_CHAN_5GHZ(ic->ic_bsschan) ? 12 : 2;
rt2661_setup_tx_desc(sc, &desc, RT2661_TX_TIMESTAMP, RT2661_TX_HWSEQ,
m0->m_pkthdr.len, rate, NULL, 0, RT2661_QID_MGT);
/* copy the first 24 bytes of Tx descriptor into NIC memory */
RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0, (uint8_t *)&desc, 24);
/* copy beacon header and payload into NIC memory */
RAL_WRITE_REGION_1(sc, RT2661_HW_BEACON_BASE0 + 24,
mtod(m0, uint8_t *), m0->m_pkthdr.len);
m_freem(m0);
return 0;
}
/*
* Enable TSF synchronization and tell h/w to start sending beacons for IBSS
* and HostAP operating modes.
*/
static void
rt2661_enable_tsf_sync(struct rt2661_softc *sc)
{
struct ifnet *ifp = sc->sc_ifp;
struct ieee80211com *ic = ifp->if_l2com;
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
uint32_t tmp;
if (vap->iv_opmode != IEEE80211_M_STA) {
/*
* Change default 16ms TBTT adjustment to 8ms.
* Must be done before enabling beacon generation.
*/
RAL_WRITE(sc, RT2661_TXRX_CSR10, 1 << 12 | 8);
}
tmp = RAL_READ(sc, RT2661_TXRX_CSR9) & 0xff000000;
/* set beacon interval (in 1/16ms unit) */
tmp |= vap->iv_bss->ni_intval * 16;
tmp |= RT2661_TSF_TICKING | RT2661_ENABLE_TBTT;
if (vap->iv_opmode == IEEE80211_M_STA)
tmp |= RT2661_TSF_MODE(1);
else
tmp |= RT2661_TSF_MODE(2) | RT2661_GENERATE_BEACON;
RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp);
}
/*
* Retrieve the "Received Signal Strength Indicator" from the raw values
* contained in Rx descriptors. The computation depends on which band the
* frame was received. Correction values taken from the reference driver.
*/
static int
rt2661_get_rssi(struct rt2661_softc *sc, uint8_t raw)
{
int lna, agc, rssi;
lna = (raw >> 5) & 0x3;
agc = raw & 0x1f;
if (lna == 0) {
/*
* No mapping available.
*
* NB: Since RSSI is relative to noise floor, -1 is
* adequate for caller to know error happened.
*/
return -1;
}
rssi = (2 * agc) - RT2661_NOISE_FLOOR;
if (IEEE80211_IS_CHAN_2GHZ(sc->sc_curchan)) {
rssi += sc->rssi_2ghz_corr;
if (lna == 1)
rssi -= 64;
else if (lna == 2)
rssi -= 74;
else if (lna == 3)
rssi -= 90;
} else {
rssi += sc->rssi_5ghz_corr;
if (lna == 1)
rssi -= 64;
else if (lna == 2)
rssi -= 86;
else if (lna == 3)
rssi -= 100;
}
return rssi;
}
static void
rt2661_scan_start(struct ieee80211com *ic)
{
struct ifnet *ifp = ic->ic_ifp;
struct rt2661_softc *sc = ifp->if_softc;
uint32_t tmp;
/* abort TSF synchronization */
tmp = RAL_READ(sc, RT2661_TXRX_CSR9);
RAL_WRITE(sc, RT2661_TXRX_CSR9, tmp & ~0xffffff);
rt2661_set_bssid(sc, ifp->if_broadcastaddr);
}
static void
rt2661_scan_end(struct ieee80211com *ic)
{
struct ifnet *ifp = ic->ic_ifp;
struct rt2661_softc *sc = ifp->if_softc;
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
rt2661_enable_tsf_sync(sc);
/* XXX keep local copy */
rt2661_set_bssid(sc, vap->iv_bss->ni_bssid);
}
static void
rt2661_set_channel(struct ieee80211com *ic)
{
struct ifnet *ifp = ic->ic_ifp;
struct rt2661_softc *sc = ifp->if_softc;
RAL_LOCK(sc);
rt2661_set_chan(sc, ic->ic_curchan);
sc->sc_txtap.wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
sc->sc_txtap.wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
sc->sc_rxtap.wr_chan_freq = htole16(ic->ic_curchan->ic_freq);
sc->sc_rxtap.wr_chan_flags = htole16(ic->ic_curchan->ic_flags);
RAL_UNLOCK(sc);
}
Reference in New Issue View Git Blame Copy Permalink