freebsd-nq/sys/crypto/ccp/ccp_lsb.h
Conrad Meyer 844d9543dc Add ccp(4): experimental driver for AMD Crypto Co-Processor
* Registers TRNG source for random(4)
* Finds available queues, LSBs; allocates static objects
* Allocates a shared MSI-X for all queues.  The hardware does not have
  separate interrupts per queue.  Working interrupt mode driver.
* Computes SHA hashes, HMAC.  Passes cryptotest.py, cryptocheck tests.
* Does AES-CBC, CTR mode, and XTS.  cryptotest.py and cryptocheck pass.
* Support for "authenc" (AES + HMAC).  (SHA1 seems to result in
  "unaligned" cleartext inputs from cryptocheck -- which the engine
  cannot handle.  SHA2 seems to work fine.)
* GCM passes for block-multiple AAD, input lengths

Largely based on ccr(4), part of cxgbe(4).

Rough performance averages on AMD Ryzen 1950X (4kB buffer):
aesni:      SHA1: ~8300 Mb/s    SHA256: ~8000 Mb/s
ccp:               ~630 Mb/s    SHA256:  ~660 Mb/s  SHA512:  ~700 Mb/s
cryptosoft:       ~1800 Mb/s    SHA256: ~1800 Mb/s  SHA512: ~2700 Mb/s

As you can see, performance is poor in comparison to aesni(4) and even
cryptosoft (due to high setup cost).  At a larger buffer size (128kB),
throughput is a little better (but still worse than aesni(4)):

aesni:      SHA1:~10400 Mb/s    SHA256: ~9950 Mb/s
ccp:              ~2200 Mb/s    SHA256: ~2600 Mb/s  SHA512: ~3800 Mb/s
cryptosoft:       ~1750 Mb/s    SHA256: ~1800 Mb/s  SHA512: ~2700 Mb/s

AES performance has a similar story:

aesni:      4kB: ~11250 Mb/s    128kB: ~11250 Mb/s
ccp:               ~350 Mb/s    128kB:  ~4600 Mb/s
cryptosoft:       ~1750 Mb/s    128kB:  ~1700 Mb/s

This driver is EXPERIMENTAL.  You should verify cryptographic results on
typical and corner case inputs from your application against a known- good
implementation.

Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D12723
2018-01-18 22:01:30 +00:00

46 lines
1.9 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2017 Conrad Meyer <cem@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#pragma once
#define LSB_ENTRY_SIZE 32 /* bytes, or 256 bits */
#define LSB_REGION_LENGTH 16 /* entries */
/* For now, just statically allocate some LSB entries for specific purposes. */
#define LSB_ENTRY_KEY 0
#define LSB_ENTRY_IV 2
#define LSB_ENTRY_SHA 4
#define LSB_ENTRY_GHASH 6
#define LSB_ENTRY_GHASH_IN 7
void ccp_queue_decode_lsb_regions(struct ccp_softc *sc, uint64_t lsbmask,
unsigned queue);
void ccp_assign_lsb_regions(struct ccp_softc *sc, uint64_t lsbmask);