6b172e59a6
optimizations I have been working on yet, but does bring in some bug fixes and performance improvments that were easy to regression test: Setup the data fifo threshold and bus off timing correctly for 27/284x cards. Users of these adapters with fast periferals (greater than 5MB/s) will notice a big performance difference. (Sometimes as large as going from 3.7->8.3MB/s). Fix handling of the active target flags. Some of the outbs where missing the base offset in the abort code. The abort code still needs lots of work. Support 3940 controllers, but only with 16 SCBs for now. Eventually I'll add support for all 255, but I need to find a tester for the code first since we have to enable the cards external SRAM to do this. Add Dan Eischen's serial eeprom reading facilities. This allows the 2940 adapters to pull additional information left over from SCSI-Select right out out of the configuration seeprom. If the BIOS is disabled on 274x controllers, reset all target parameters to there defaults since you can't rely on what is stored in scratch ram. Report motherboard controllers as such. Stick the first SG address and count into the SCB data and count areas for all transfers in preparation of a later sequencer optimization. Keep track of which targets can are allowed to have the disconnection priveledge since this will be handled by the kernel driver in the future. If a target issues a message reject in response to a tagged message, disable tagged queuing for that target. Some seagates say they can do tagged queuing, but lie, and its a shame to have to disable tagged queuing on all devices just because you have one that can't cope.
163 lines
5.5 KiB
C
163 lines
5.5 KiB
C
/*
|
|
* Interface to the generic driver for the aic7xxx based adaptec
|
|
* SCSI controllers. This is used to implement product specific
|
|
* probe and attach routines.
|
|
*
|
|
* Copyright (c) 1994, 1995 Justin T. Gibbs.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice immediately at the beginning of the file, without modification,
|
|
* this list of conditions, and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Absolutely no warranty of function or purpose is made by the author
|
|
* Justin T. Gibbs.
|
|
* 4. Modifications may be freely made to this file if the above conditions
|
|
* are met.
|
|
*
|
|
* $Id: aic7xxx.h,v 1.10 1995/06/11 19:31:31 rgrimes Exp $
|
|
*/
|
|
|
|
#ifndef _AIC7XXX_H_
|
|
#define _AIC7XXX_H_
|
|
|
|
#include "ahc.h" /* for NAHC from config */
|
|
|
|
#define AHC_NSEG 256 /* number of dma segments supported */
|
|
|
|
#define AHC_SCB_MAX 16 /*
|
|
* Up to 16 SCBs on some types of aic7xxx based
|
|
* boards. The aic7770 family only have 4
|
|
*/
|
|
|
|
/* #define AHCDEBUG */
|
|
|
|
typedef unsigned long int physaddr;
|
|
extern int ahc_unit;
|
|
|
|
struct ahc_dma_seg {
|
|
physaddr addr;
|
|
long len;
|
|
};
|
|
|
|
typedef enum {
|
|
AHC_NONE = 0x000,
|
|
AHC_WIDE = 0x002, /* Wide Channel */
|
|
AHC_TWIN = 0x008, /* Twin Channel */
|
|
AHC_AIC7770 = 0x010,
|
|
AHC_AIC7850 = 0x020,
|
|
AHC_AIC7870 = 0x040,
|
|
AHC_AIC78X0 = 0x060, /* PCI Based Controller */
|
|
AHC_274 = 0x110, /* EISA Based Controller */
|
|
AHC_284 = 0x210, /* VL/ISA Based Controller */
|
|
AHC_294 = 0x440, /* PCI Based Controller */
|
|
AHC_394 = 0x840 /* Twin Channel PCI Controller */
|
|
}ahc_type;
|
|
|
|
/*
|
|
* The driver keeps up to MAX_SCB scb structures per card in memory. Only the
|
|
* first 26 bytes of the structure are valid for the hardware, the rest used
|
|
* for driver level bookeeping. The "__attribute ((packed))" tags ensure that
|
|
* gcc does not attempt to pad the long ints in the structure to word
|
|
* boundaries since the first 26 bytes of this structure must have the correct
|
|
* offsets for the hardware to find them. The driver is further optimized
|
|
* so that we only have to download the first 19 bytes since as long
|
|
* as we always use S/G, the last fields should be zero anyway.
|
|
*/
|
|
struct scb {
|
|
/* ------------ Begin hardware supported fields ---------------- */
|
|
/*1*/ u_char control;
|
|
#define SCB_NEEDWDTR 0x80 /* Initiate Wide Negotiation */
|
|
#define SCB_NEEDSDTR 0x40 /* Initiate Sync Negotiation */
|
|
#define SCB_TE 0x20 /* Tag enable */
|
|
#define SCB_NEEDDMA 0x08 /* Refresh SCB from host ram */
|
|
#define SCB_DIS 0x04
|
|
#define SCB_TAG_TYPE 0x3
|
|
#define SIMPLE_QUEUE 0x0
|
|
#define HEAD_QUEUE 0x1
|
|
#define OR_QUEUE 0x2
|
|
/*2*/ u_char target_channel_lun; /* 4/1/3 bits */
|
|
/*3*/ u_char SG_segment_count;
|
|
/*7*/ physaddr SG_list_pointer __attribute__ ((packed));
|
|
/*11*/ physaddr cmdpointer __attribute__ ((packed));
|
|
/*12*/ u_char cmdlen;
|
|
/*14*/ u_char RESERVED[2]; /* must be zero */
|
|
/*15*/ u_char target_status;
|
|
/*18*/ u_char residual_data_count[3];
|
|
/*19*/ u_char residual_SG_segment_count;
|
|
#define SCB_DOWN_SIZE 26 /* amount to actually download */
|
|
/*23*/ physaddr data __attribute__ ((packed));
|
|
/*26*/ u_char datalen[3];
|
|
#define SCB_UP_SIZE 26 /*
|
|
* amount we need to upload to perform
|
|
* a request sense.
|
|
*/
|
|
/*30*/ physaddr host_scb __attribute__ ((packed));
|
|
/*31*/ u_char next_waiting; /* Used to thread SCBs awaiting
|
|
* selection
|
|
*/
|
|
#define SCB_LIST_NULL 0xff /* SCB list equivelent to NULL */
|
|
#if 0
|
|
/*
|
|
* No real point in transferring this to the
|
|
* SCB registers.
|
|
*/
|
|
unsigned char RESERVED[1];
|
|
#endif
|
|
/*-----------------end of hardware supported fields----------------*/
|
|
struct scb *next; /* in free list */
|
|
struct scsi_xfer *xs; /* the scsi_xfer for this cmd */
|
|
int flags;
|
|
#define SCB_FREE 0x00
|
|
#define SCB_ACTIVE 0x01
|
|
#define SCB_ABORTED 0x02
|
|
#define SCB_DEVICE_RESET 0x04
|
|
#define SCB_IMMED 0x08
|
|
#define SCB_SENSE 0x10
|
|
int position; /* Position in scbarray */
|
|
struct ahc_dma_seg ahc_dma[AHC_NSEG] __attribute__ ((packed));
|
|
struct scsi_sense sense_cmd; /* SCSI command block */
|
|
};
|
|
|
|
struct ahc_data {
|
|
ahc_type type;
|
|
int flags;
|
|
#define AHC_INIT 0x01
|
|
#define AHC_RUNNING 0x02
|
|
u_long baseport;
|
|
struct scb *scbarray[AHC_SCB_MAX]; /* Mirror boards scbarray */
|
|
struct scb *free_scb;
|
|
int our_id; /* our scsi id */
|
|
int our_id_b; /* B channel scsi id */
|
|
int vect;
|
|
struct scb *immed_ecb; /* an outstanding immediete command */
|
|
struct scsi_link sc_link;
|
|
struct scsi_link sc_link_b; /* Second bus for Twin channel cards */
|
|
u_short needsdtr_orig; /* Targets we initiate sync neg with */
|
|
u_short needwdtr_orig; /* Targets we initiate wide neg with */
|
|
u_short needsdtr; /* Current list of negotiated targets */
|
|
u_short needwdtr; /* Current list of negotiated targets */
|
|
u_short sdtrpending; /* Pending SDTR to these targets */
|
|
u_short wdtrpending; /* Pending WDTR to these targets */
|
|
u_short tagenable; /* Targets that can handle tagqueing */
|
|
u_short discenable; /* Targets allowed to disconnect */
|
|
int numscbs;
|
|
int activescbs;
|
|
u_char maxscbs;
|
|
u_char unpause;
|
|
u_char pause;
|
|
};
|
|
|
|
extern struct ahc_data *ahcdata[NAHC];
|
|
|
|
int ahcprobe __P((int unit, u_long io_base, ahc_type type));
|
|
int ahc_attach __P((int unit));
|
|
int ahcintr();
|
|
|
|
#endif /* _AIC7XXX_H_ */
|