d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
265e95d904
freebsd-nq/sys/i386/isa/tw.c
Julian Elischer b40ce4165d KSE Milestone 2 
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00

1163 lines
34 KiB
C
Raw Blame History

/*-
* Copyright (c) 1992, 1993, 1995 Eugene W. Stark
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Eugene W. Stark.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY EUGENE W. STARK (THE AUTHOR) ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*
*/
#include "tw.h"
/*
* Driver configuration parameters
*/
/*
* Time for 1/2 of a power line cycle, in microseconds.
* Change this to 10000 for 50Hz power. Phil Sampson
* (vk2jnt@gw.vk2jnt.ampr.org OR sampson@gidday.enet.dec.com)
* reports that this works (at least in Australia) using a
* TW7223 module (a local version of the TW523).
*/
#define HALFCYCLE 8333 /* 1/2 cycle = 8333us at 60Hz */
/*
* Undefine the following if you don't have the high-resolution "microtime"
* routines (leave defined for FreeBSD, which has them).
*/
#define HIRESTIME
/*
* End of driver configuration parameters
*/
/*
* FreeBSD Device Driver for X-10 POWERHOUSE (tm)
* Two-Way Power Line Interface, Model #TW523
*
* written by Eugene W. Stark (stark@cs.sunysb.edu)
* December 2, 1992
*
* NOTES:
*
* The TW523 is a carrier-current modem for home control/automation purposes.
* It is made by:
*
* X-10 Inc.
* 185A LeGrand Ave.
* Northvale, NJ 07647
* USA
* (201) 784-9700 or 1-800-526-0027
*
* X-10 Home Controls Inc.
* 1200 Aerowood Drive, Unit 20
* Mississauga, Ontario
* (416) 624-4446 or 1-800-387-3346
*
* The TW523 is designed for communications using the X-10 protocol,
* which is compatible with a number of home control systems, including
* Radio Shack "Plug 'n Power(tm)" and Stanley "Lightmaker(tm)."
* I bought my TW523 from:
*
* Home Control Concepts
* 9353-C Activity Road
* San Diego, CA 92126
* (619) 693-8887
*
* They supplied me with the TW523 (which has an RJ-11 four-wire modular
* telephone connector), a modular cable, an RJ-11 to DB-25 connector with
* internal wiring, documentation from X-10 on the TW523 (very good),
* an instruction manual by Home Control Concepts (not very informative),
* and a floppy disk containing binary object code of some demonstration/test
* programs and of a C function library suitable for controlling the TW523
* by an IBM PC under MS-DOS (not useful to me other than to verify that
* the unit worked). I suggest saving money and buying the bare TW523
* rather than the TW523 development kit (what I bought), because if you
* are running FreeBSD you don't really care about the DOS binaries.
*
* The interface to the TW-523 consists of four wires on the RJ-11 connector,
* which are jumpered to somewhat more wires on the DB-25 connector, which
* in turn is intended to plug into the PC parallel printer port. I dismantled
* the DB-25 connector to find out what they had done:
*
* Signal RJ-11 pin DB-25 pin(s) Parallel Port
* Transmit TX 4 (Y) 2, 4, 6, 8 Data out
* Receive RX 3 (G) 10, 14 -ACK, -AutoFeed
* Common 2 (R) 25 Common
* Zero crossing 1 (B) 17 or 12 -Select or +PaperEnd
*
* NOTE: In the original cable I have (which I am still using, May, 1997)
* the Zero crossing signal goes to pin 17 (-Select) on the parallel port.
* In retrospect, this doesn't make a whole lot of sense, given that the
* -Select signal propagates the other direction. Indeed, some people have
* reported problems with this, and have had success using pin 12 (+PaperEnd)
* instead. This driver searches for the zero crossing signal on either
* pin 17 or pin 12, so it should work with either cable configuration.
* My suggestion would be to start by making the cable so that the zero
* crossing signal goes to pin 12 on the parallel port.
*
* The zero crossing signal is used to synchronize transmission to the
* zero crossings of the AC line, as detailed in the X-10 documentation.
* It would be nice if one could generate interrupts with this signal,
* however one needs interrupts on both the rising and falling edges,
* and the -ACK signal to the parallel port interrupts only on the falling
* edge, so it can't be done without additional hardware.
*
* In this driver, the transmit function is performed in a non-interrupt-driven
* fashion, by polling the zero crossing signal to determine when a transition
* has occurred. This wastes CPU time during transmission, but it seems like
* the best that can be done without additional hardware. One problem with
* the scheme is that preemption of the CPU during transmission can cause loss
* of sync. The driver tries to catch this, by noticing that a long delay
* loop has somehow become foreshortened, and the transmission is aborted with
* an error return. It is up to the user level software to handle this
* situation (most likely by retrying the transmission).
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/uio.h>
#include <sys/syslog.h>
#include <sys/selinfo.h>
#include <sys/poll.h>
#include <sys/bus.h>
#define MIN(a,b) ((a)<(b)?(a):(b))
#ifdef HIRESTIME
#include <sys/time.h>
#endif /* HIRESTIME */
#include <i386/isa/isa_device.h>
#ifndef COMPAT_OLDISA
#error "The tw device requires the old isa compatibility shims"
#endif
/*
* Transmission is done by calling write() to send three byte packets of data.
* The first byte contains a four bit house code (0=A to 15=P).
* The second byte contains five bit unit/key code (0=unit 1 to 15=unit 16,
* 16=All Units Off to 31 = Status Request). The third byte specifies
* the number of times the packet is to be transmitted without any
* gaps between successive transmissions. Normally this is 2, as per
* the X-10 documentation, but sometimes (e.g. for bright and dim codes)
* it can be another value. Each call to write can specify an arbitrary
* number of data bytes. An incomplete packet is buffered until a subsequent
* call to write() provides data to complete it. At most one packet will
* actually be processed in any call to write(). Successive calls to write()
* leave a three-cycle gap between transmissions, per the X-10 documentation.
*
* Reception is done using read().
* The driver produces a series of three-character packets.
* In each packet, the first character consists of flags,
* the second character is a four bit house code (0-15),
* and the third character is a five bit key/function code (0-31).
* The flags are the following:
*/
#define TW_RCV_LOCAL 1 /* The packet arrived during a local transmission */
#define TW_RCV_ERROR 2 /* An invalid/corrupted packet was received */
/*
* IBM PC parallel port definitions relevant to TW523
*/
#define tw_data 0 /* Data to tw523 (R/W) */
#define tw_status 1 /* Status of tw523 (R) */
#define TWS_RDATA 0x40 /* tw523 receive data */
#define TWS_OUT 0x20 /* pin 12, out of paper */
#define tw_control 2 /* Control tw523 (R/W) */
#define TWC_SYNC 0x08 /* tw523 sync (pin 17) */
#define TWC_ENA 0x10 /* tw523 interrupt enable */
/*
* Miscellaneous defines
*/
#define TWUNIT(dev) (minor(dev)) /* Extract unit number from device */
#define TWPRI (PZERO+8) /* I don't know any better, so let's */
/* use the same as the line printer */
static int twprobe(struct isa_device *idp);
static int twattach(struct isa_device *idp);
struct isa_driver twdriver = {
INTR_TYPE_TTY,
twprobe,
twattach,
"tw"
};
COMPAT_ISA_DRIVER(tw, twdriver);
static d_open_t twopen;
static d_close_t twclose;
static d_read_t twread;
static d_write_t twwrite;
static d_poll_t twpoll;
#define CDEV_MAJOR 19
static struct cdevsw tw_cdevsw = {
/* open */ twopen,
/* close */ twclose,
/* read */ twread,
/* write */ twwrite,
/* ioctl */ noioctl,
/* poll */ twpoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "tw",
/* maj */ CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ 0,
};
/*
* Software control structure for TW523
*/
#define TWS_XMITTING 1 /* Transmission in progress */
#define TWS_RCVING 2 /* Reception in progress */
#define TWS_WANT 4 /* A process wants received data */
#define TWS_OPEN 8 /* Is it currently open? */
#define TW_SIZE 3*60 /* Enough for about 10 sec. of input */
#define TW_MIN_DELAY 1500 /* Ignore interrupts of lesser latency */
static struct tw_sc {
u_int sc_port; /* I/O Port */
u_int sc_state; /* Current software control state */
struct selinfo sc_selp; /* Information for select() */
u_char sc_xphase; /* Current state of sync (for transmitter) */
u_char sc_rphase; /* Current state of sync (for receiver) */
u_char sc_flags; /* Flags for current reception */
short sc_rcount; /* Number of bits received so far */
int sc_bits; /* Bits received so far */
u_char sc_pkt[3]; /* Packet not yet transmitted */
short sc_pktsize; /* How many bytes in the packet? */
u_char sc_buf[TW_SIZE]; /* We buffer our own input */
int sc_nextin; /* Next free slot in circular buffer */
int sc_nextout; /* First used slot in circular buffer */
/* Callout for canceling our abortrcv timeout */
struct callout_handle abortrcv_ch;
#ifdef HIRESTIME
int sc_xtimes[22]; /* Times for bits in current xmit packet */
int sc_rtimes[22]; /* Times for bits in current rcv packet */
int sc_no_rcv; /* number of interrupts received */
#define SC_RCV_TIME_LEN 128
int sc_rcv_time[SC_RCV_TIME_LEN]; /* usec time stamp on interrupt */
#endif /* HIRESTIME */
} tw_sc[NTW];
static int tw_zcport; /* offset of port for zero crossing signal */
static int tw_zcmask; /* mask for the zero crossing signal */
static void twdelay25(void);
static void twdelayn(int n);
static void twsetuptimes(int *a);
static int wait_for_zero(struct tw_sc *sc);
static int twputpkt(struct tw_sc *sc, u_char *p);
static ointhand2_t twintr;
static int twgetbytes(struct tw_sc *sc, u_char *p, int cnt);
static timeout_t twabortrcv;
static int twsend(struct tw_sc *sc, int h, int k, int cnt);
static int next_zero(struct tw_sc *sc);
static int twchecktime(int target, int tol);
static void twdebugtimes(struct tw_sc *sc);
/*
* Counter value for delay loop.
* It is adjusted by twprobe so that the delay loop takes about 25us.
*/
#define TWDELAYCOUNT 161 /* Works on my 486DX/33 */
static int twdelaycount;
/*
* Twdelay25 is used for very short delays of about 25us.
* It is implemented with a calibrated delay loop, and should be
* fairly accurate ... unless we are preempted by an interrupt.
*
* We use this to wait for zero crossings because the X-10 specs say we
* are supposed to assert carrier within 25us when one happens.
* I don't really believe we can do this, but the X-10 devices seem to be
* fairly forgiving.
*/
static void twdelay25(void)
{
int cnt;
for(cnt = twdelaycount; cnt; cnt--); /* Should take about 25us */
}
/*
* Twdelayn is used to time the length of the 1ms carrier pulse.
* This is not very critical, but if we have high-resolution time-of-day
* we check it every apparent 200us to make sure we don't get too far off
* if we happen to be interrupted during the delay.
*/
static void twdelayn(int n)
{
#ifdef HIRESTIME
int t, d;
struct timeval tv;
microtime(&tv);
t = tv.tv_usec;
t += n;
#endif /* HIRESTIME */
while(n > 0) {
twdelay25();
n -= 25;
#ifdef HIRESTIME
if((n & 0x7) == 0) {
microtime(&tv);
d = tv.tv_usec - t;
if(d >= 0 && d < 1000000) return;
}
#endif /* HIRESTIME */
}
}
static int twprobe(idp)
struct isa_device *idp;
{
struct tw_sc sc;
int d;
int tries;
static int once;
if (!once++)
cdevsw_add(&tw_cdevsw);
sc.sc_port = idp->id_iobase;
/* Search for the zero crossing signal at ports, bit combinations. */
tw_zcport = tw_control;
tw_zcmask = TWC_SYNC;
sc.sc_xphase = inb(idp->id_iobase + tw_zcport) & tw_zcmask;
if(wait_for_zero(&sc) < 0) {
tw_zcport = tw_status;
tw_zcmask = TWS_OUT;
sc.sc_xphase = inb(idp->id_iobase + tw_zcport) & tw_zcmask;
}
if(wait_for_zero(&sc) < 0)
return(0);
/*
* Iteratively check the timing of a few sync transitions, and adjust
* the loop delay counter, if necessary, to bring the timing reported
* by wait_for_zero() close to HALFCYCLE. Give up if anything
* ridiculous happens.
*/
if(twdelaycount == 0) { /* Only adjust timing for first unit */
twdelaycount = TWDELAYCOUNT;
for(tries = 0; tries < 10; tries++) {
sc.sc_xphase = inb(idp->id_iobase + tw_zcport) & tw_zcmask;
if(wait_for_zero(&sc) >= 0) {
d = wait_for_zero(&sc);
if(d <= HALFCYCLE/100 || d >= HALFCYCLE*100) {
twdelaycount = 0;
return(0);
}
twdelaycount = (twdelaycount * d)/HALFCYCLE;
}
}
}
/*
* Now do a final check, just to make sure
*/
sc.sc_xphase = inb(idp->id_iobase + tw_zcport) & tw_zcmask;
if(wait_for_zero(&sc) >= 0) {
d = wait_for_zero(&sc);
if(d <= (HALFCYCLE * 110)/100 && d >= (HALFCYCLE * 90)/100) return(8);
}
return(0);
}
static int twattach(idp)
struct isa_device *idp;
{
struct tw_sc *sc;
int unit;
idp->id_ointr = twintr;
sc = &tw_sc[unit = idp->id_unit];
sc->sc_port = idp->id_iobase;
sc->sc_state = 0;
sc->sc_rcount = 0;
callout_handle_init(&sc->abortrcv_ch);
make_dev(&tw_cdevsw, unit, 0, 0, 0600, "tw%d", unit);
return (1);
}
int twopen(dev, flag, mode, td)
dev_t dev;
int flag;
int mode;
struct thread *td;
{
struct tw_sc *sc = &tw_sc[TWUNIT(dev)];
int s;
s = spltty();
if(sc->sc_state == 0) {
sc->sc_state = TWS_OPEN;
sc->sc_nextin = sc->sc_nextout = 0;
sc->sc_pktsize = 0;
outb(sc->sc_port+tw_control, TWC_ENA);
}
splx(s);
return(0);
}
int twclose(dev, flag, mode, td)
dev_t dev;
int flag;
int mode;
struct thread *td;
{
struct tw_sc *sc = &tw_sc[TWUNIT(dev)];
int s;
s = spltty();
sc->sc_state = 0;
outb(sc->sc_port+tw_control, 0);
splx(s);
return(0);
}
int twread(dev, uio, ioflag)
dev_t dev;
struct uio *uio;
int ioflag;
{
u_char buf[3];
struct tw_sc *sc = &tw_sc[TWUNIT(dev)];
int error, cnt, s;
s = spltty();
cnt = MIN(uio->uio_resid, 3);
if((error = twgetbytes(sc, buf, cnt)) == 0) {
error = uiomove(buf, cnt, uio);
}
splx(s);
return(error);
}
int twwrite(dev, uio, ioflag)
dev_t dev;
struct uio *uio;
int ioflag;
{
struct tw_sc *sc;
int house, key, reps;
int s, error;
int cnt;
sc = &tw_sc[TWUNIT(dev)];
/*
* Note: Although I had intended to allow concurrent transmitters,
* there is a potential problem here if two processes both write
* into the sc_pkt buffer at the same time. The following code
* is an additional critical section that needs to be synchronized.
*/
s = spltty();
cnt = MIN(3 - sc->sc_pktsize, uio->uio_resid);
error = uiomove(&(sc->sc_pkt[sc->sc_pktsize]), cnt, uio);
if(error) {
splx(s);
return(error);
}
sc->sc_pktsize += cnt;
if(sc->sc_pktsize < 3) { /* Only transmit 3-byte packets */
splx(s);
return(0);
}
sc->sc_pktsize = 0;
/*
* Collect house code, key code, and rep count, and check for sanity.
*/
house = sc->sc_pkt[0];
key = sc->sc_pkt[1];
reps = sc->sc_pkt[2];
if(house >= 16 || key >= 32) {
splx(s);
return(ENODEV);
}
/*
* Synchronize with the receiver operating in the bottom half, and
* also with concurrent transmitters.
* We don't want to interfere with a packet currently being received,
* and we would like the receiver to recognize when a packet has
* originated locally.
*/
while(sc->sc_state & (TWS_RCVING | TWS_XMITTING)) {
error = tsleep((caddr_t)sc, TWPRI|PCATCH, "twwrite", 0);
if(error) {
splx(s);
return(error);
}
}
sc->sc_state |= TWS_XMITTING;
/*
* Everything looks OK, let's do the transmission.
*/
splx(s); /* Enable interrupts because this takes a LONG time */
error = twsend(sc, house, key, reps);
s = spltty();
sc->sc_state &= ~TWS_XMITTING;
wakeup((caddr_t)sc);
splx(s);
if(error) return(EIO);
else return(0);
}
/*
* Determine if there is data available for reading
*/
int twpoll(dev, events, td)
dev_t dev;
int events;
struct thread *td;
{
struct tw_sc *sc;
int s;
int revents = 0;
sc = &tw_sc[TWUNIT(dev)];
s = spltty();
/* XXX is this correct? the original code didn't test select rw mode!! */
if (events & (POLLIN | POLLRDNORM)) {
if(sc->sc_nextin != sc->sc_nextout)
revents |= events & (POLLIN | POLLRDNORM);
else
selrecord(td, &sc->sc_selp);
}
splx(s);
return(revents);
}
/*
* X-10 Protocol
*/
#define X10_START_LENGTH 4
static char X10_START[] = { 1, 1, 1, 0 };
/*
* Each bit of the 4-bit house code and 5-bit key code
* is transmitted twice, once in true form, and then in
* complemented form. This is already taken into account
* in the following tables.
*/
#define X10_HOUSE_LENGTH 8
static char X10_HOUSE[16][8] = {
{ 0, 1, 1, 0, 1, 0, 0, 1 }, /* A = 0110 */
{ 1, 0, 1, 0, 1, 0, 0, 1 }, /* B = 1110 */
{ 0, 1, 0, 1, 1, 0, 0, 1 }, /* C = 0010 */
{ 1, 0, 0, 1, 1, 0, 0, 1 }, /* D = 1010 */
{ 0, 1, 0, 1, 0, 1, 1, 0 }, /* E = 0001 */
{ 1, 0, 0, 1, 0, 1, 1, 0 }, /* F = 1001 */
{ 0, 1, 1, 0, 0, 1, 1, 0 }, /* G = 0101 */
{ 1, 0, 1, 0, 0, 1, 1, 0 }, /* H = 1101 */
{ 0, 1, 1, 0, 1, 0, 1, 0 }, /* I = 0111 */
{ 1, 0, 1, 0, 1, 0, 1, 0 }, /* J = 1111 */
{ 0, 1, 0, 1, 1, 0, 1, 0 }, /* K = 0011 */
{ 1, 0, 0, 1, 1, 0, 1, 0 }, /* L = 1011 */
{ 0, 1, 0, 1, 0, 1, 0, 1 }, /* M = 0000 */
{ 1, 0, 0, 1, 0, 1, 0, 1 }, /* N = 1000 */
{ 0, 1, 1, 0, 0, 1, 0, 1 }, /* O = 0100 */
{ 1, 0, 1, 0, 0, 1, 0, 1 } /* P = 1100 */
};
#define X10_KEY_LENGTH 10
static char X10_KEY[32][10] = {
{ 0, 1, 1, 0, 1, 0, 0, 1, 0, 1 }, /* 01100 => 1 */
{ 1, 0, 1, 0, 1, 0, 0, 1, 0, 1 }, /* 11100 => 2 */
{ 0, 1, 0, 1, 1, 0, 0, 1, 0, 1 }, /* 00100 => 3 */
{ 1, 0, 0, 1, 1, 0, 0, 1, 0, 1 }, /* 10100 => 4 */
{ 0, 1, 0, 1, 0, 1, 1, 0, 0, 1 }, /* 00010 => 5 */
{ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1 }, /* 10010 => 6 */
{ 0, 1, 1, 0, 0, 1, 1, 0, 0, 1 }, /* 01010 => 7 */
{ 1, 0, 1, 0, 0, 1, 1, 0, 0, 1 }, /* 11010 => 8 */
{ 0, 1, 1, 0, 1, 0, 1, 0, 0, 1 }, /* 01110 => 9 */
{ 1, 0, 1, 0, 1, 0, 1, 0, 0, 1 }, /* 11110 => 10 */
{ 0, 1, 0, 1, 1, 0, 1, 0, 0, 1 }, /* 00110 => 11 */
{ 1, 0, 0, 1, 1, 0, 1, 0, 0, 1 }, /* 10110 => 12 */
{ 0, 1, 0, 1, 0, 1, 0, 1, 0, 1 }, /* 00000 => 13 */
{ 1, 0, 0, 1, 0, 1, 0, 1, 0, 1 }, /* 10000 => 14 */
{ 0, 1, 1, 0, 0, 1, 0, 1, 0, 1 }, /* 01000 => 15 */
{ 1, 0, 1, 0, 0, 1, 0, 1, 0, 1 }, /* 11000 => 16 */
{ 0, 1, 0, 1, 0, 1, 0, 1, 1, 0 }, /* 00001 => All Units Off */
{ 0, 1, 0, 1, 0, 1, 1, 0, 1, 0 }, /* 00011 => All Units On */
{ 0, 1, 0, 1, 1, 0, 0, 1, 1, 0 }, /* 00101 => On */
{ 0, 1, 0, 1, 1, 0, 1, 0, 1, 0 }, /* 00111 => Off */
{ 0, 1, 1, 0, 0, 1, 0, 1, 1, 0 }, /* 01001 => Dim */
{ 0, 1, 1, 0, 0, 1, 1, 0, 1, 0 }, /* 01011 => Bright */
{ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0 }, /* 01101 => All LIGHTS Off */
{ 0, 1, 1, 0, 1, 0, 1, 0, 1, 0 }, /* 01111 => Extended Code */
{ 1, 0, 0, 1, 0, 1, 0, 1, 1, 0 }, /* 10001 => Hail Request */
{ 1, 0, 0, 1, 0, 1, 1, 0, 1, 0 }, /* 10011 => Hail Acknowledge */
{ 1, 0, 0, 1, 1, 0, 0, 1, 1, 0 }, /* 10101 => Preset Dim 0 */
{ 1, 0, 0, 1, 1, 0, 1, 0, 1, 0 }, /* 10111 => Preset Dim 1 */
{ 1, 0, 1, 0, 0, 1, 0, 1, 0, 1 }, /* 11000 => Ext Data (analog) */
{ 1, 0, 1, 0, 0, 1, 1, 0, 1, 0 }, /* 11011 => Status = on */
{ 1, 0, 1, 0, 1, 0, 0, 1, 1, 0 }, /* 11101 => Status = off */
{ 1, 0, 1, 0, 1, 0, 1, 0, 1, 0 } /* 11111 => Status request */
};
/*
* Tables for mapping received X-10 code back to house/key number.
*/
static short X10_HOUSE_INV[16] = {
12, 4, 2, 10, 14, 6, 0, 8,
13, 5, 3, 11, 15, 7, 1, 9
};
static short X10_KEY_INV[32] = {
12, 16, 4, 17, 2, 18, 10, 19,
14, 20, 6, 21, 0, 22, 8, 23,
13, 24, 5, 25, 3, 26, 11, 27,
15, 28, 7, 29, 1, 30, 9, 31
};
static char *X10_KEY_LABEL[32] = {
"1",
"2",
"3",
"4",
"5",
"6",
"7",
"8",
"9",
"10",
"11",
"12",
"13",
"14",
"15",
"16",
"All Units Off",
"All Units On",
"On",
"Off",
"Dim",
"Bright",
"All LIGHTS Off",
"Extended Code",
"Hail Request",
"Hail Acknowledge",
"Preset Dim 0",
"Preset Dim 1",
"Extended Data (analog)",
"Status = on",
"Status = off",
"Status request"
};
/*
* Transmit a packet containing house code h and key code k
*/
#define TWRETRY 10 /* Try 10 times to sync with AC line */
static int twsend(sc, h, k, cnt)
struct tw_sc *sc;
int h, k, cnt;
{
int i;
int port = sc->sc_port;
/*
* Make sure we get a reliable sync with a power line zero crossing
*/
for(i = 0; i < TWRETRY; i++) {
if(wait_for_zero(sc) > 100) goto insync;
}
log(LOG_ERR, "TWXMIT: failed to sync.\n");
return(-1);
insync:
/*
* Be sure to leave 3 cycles space between transmissions
*/
for(i = 6; i > 0; i--)
if(next_zero(sc) < 0) return(-1);
/*
* The packet is transmitted cnt times, with no gaps.
*/
while(cnt--) {
/*
* Transmit the start code
*/
for(i = 0; i < X10_START_LENGTH; i++) {
outb(port+tw_data, X10_START[i] ? 0xff : 0x00); /* Waste no time! */
#ifdef HIRESTIME
if(i == 0) twsetuptimes(sc->sc_xtimes);
if(twchecktime(sc->sc_xtimes[i], HALFCYCLE/20) == 0) {
outb(port+tw_data, 0);
return(-1);
}
#endif /* HIRESTIME */
twdelayn(1000); /* 1ms pulse width */
outb(port+tw_data, 0);
if(next_zero(sc) < 0) return(-1);
}
/*
* Transmit the house code
*/
for(i = 0; i < X10_HOUSE_LENGTH; i++) {
outb(port+tw_data, X10_HOUSE[h][i] ? 0xff : 0x00); /* Waste no time! */
#ifdef HIRESTIME
if(twchecktime(sc->sc_xtimes[i+X10_START_LENGTH], HALFCYCLE/20) == 0) {
outb(port+tw_data, 0);
return(-1);
}
#endif /* HIRESTIME */
twdelayn(1000); /* 1ms pulse width */
outb(port+tw_data, 0);
if(next_zero(sc) < 0) return(-1);
}
/*
* Transmit the unit/key code
*/
for(i = 0; i < X10_KEY_LENGTH; i++) {
outb(port+tw_data, X10_KEY[k][i] ? 0xff : 0x00);
#ifdef HIRESTIME
if(twchecktime(sc->sc_xtimes[i+X10_START_LENGTH+X10_HOUSE_LENGTH],
HALFCYCLE/20) == 0) {
outb(port+tw_data, 0);
return(-1);
}
#endif /* HIRESTIME */
twdelayn(1000); /* 1ms pulse width */
outb(port+tw_data, 0);
if(next_zero(sc) < 0) return(-1);
}
}
return(0);
}
/*
* Waste CPU cycles to get in sync with a power line zero crossing.
* The value returned is roughly how many microseconds we wasted before
* seeing the transition. To avoid wasting time forever, we give up after
* waiting patiently for 1/4 sec (15 power line cycles at 60 Hz),
* which is more than the 11 cycles it takes to transmit a full
* X-10 packet.
*/
static int wait_for_zero(sc)
struct tw_sc *sc;
{
int i, old, new, max;
int port = sc->sc_port + tw_zcport;
old = sc->sc_xphase;
max = 10000; /* 10000 * 25us = 0.25 sec */
i = 0;
while(max--) {
new = inb(port) & tw_zcmask;
if(new != old) {
sc->sc_xphase = new;
return(i*25);
}
i++;
twdelay25();
}
return(-1);
}
/*
* Wait for the next zero crossing transition, and if we don't have
* high-resolution time-of-day, check to see that the zero crossing
* appears to be arriving on schedule.
* We expect to be waiting almost a full half-cycle (8.333ms-1ms = 7.333ms).
* If we don't seem to wait very long, something is wrong (like we got
* preempted!) and we should abort the transmission because
* there's no telling how long it's really been since the
* last bit was transmitted.
*/
static int next_zero(sc)
struct tw_sc *sc;
{
int d;
#ifdef HIRESTIME
if((d = wait_for_zero(sc)) < 0) {
#else
if((d = wait_for_zero(sc)) < 6000 || d > 8500) {
/* No less than 6.0ms, no more than 8.5ms */
#endif /* HIRESTIME */
log(LOG_ERR, "TWXMIT framing error: %d\n", d);
return(-1);
}
return(0);
}
/*
* Put a three-byte packet into the circular buffer
* Should be called at priority spltty()
*/
static int twputpkt(sc, p)
struct tw_sc *sc;
u_char *p;
{
int i, next;
for(i = 0; i < 3; i++) {
next = sc->sc_nextin+1;
if(next >= TW_SIZE) next = 0;
if(next == sc->sc_nextout) { /* Buffer full */
/*
log(LOG_ERR, "TWRCV: Buffer overrun\n");
*/
return(1);
}
sc->sc_buf[sc->sc_nextin] = *p++;
sc->sc_nextin = next;
}
if(sc->sc_state & TWS_WANT) {
sc->sc_state &= ~TWS_WANT;
wakeup((caddr_t)(&sc->sc_buf));
}
selwakeup(&sc->sc_selp);
return(0);
}
/*
* Get bytes from the circular buffer
* Should be called at priority spltty()
*/
static int twgetbytes(sc, p, cnt)
struct tw_sc *sc;
u_char *p;
int cnt;
{
int error;
while(cnt--) {
while(sc->sc_nextin == sc->sc_nextout) { /* Buffer empty */
sc->sc_state |= TWS_WANT;
error = tsleep((caddr_t)(&sc->sc_buf), TWPRI|PCATCH, "twread", 0);
if(error) {
return(error);
}
}
*p++ = sc->sc_buf[sc->sc_nextout++];
if(sc->sc_nextout >= TW_SIZE) sc->sc_nextout = 0;
}
return(0);
}
/*
* Abort reception that has failed to complete in the required time.
*/
static void
twabortrcv(arg)
void *arg;
{
struct tw_sc *sc = arg;
int s;
u_char pkt[3];
s = spltty();
sc->sc_state &= ~TWS_RCVING;
/* simply ignore single isolated interrupts. */
if (sc->sc_no_rcv > 1) {
sc->sc_flags |= TW_RCV_ERROR;
pkt[0] = sc->sc_flags;
pkt[1] = pkt[2] = 0;
twputpkt(sc, pkt);
log(LOG_ERR, "TWRCV: aborting (%x, %d)\n", sc->sc_bits, sc->sc_rcount);
twdebugtimes(sc);
}
wakeup((caddr_t)sc);
splx(s);
}
static int
tw_is_within(int value, int expected, int tolerance)
{
int diff;
diff = value - expected;
if (diff < 0)
diff *= -1;
if (diff < tolerance)
return 1;
return 0;
}
/*
* This routine handles interrupts that occur when there is a falling
* transition on the RX input. There isn't going to be a transition
* on every bit (some are zero), but if we are smart and keep track of
* how long it's been since the last interrupt (via the zero crossing
* detect line and/or high-resolution time-of-day routine), we can
* reconstruct the transmission without having to poll.
*/
static void twintr(unit)
int unit;
{
struct tw_sc *sc = &tw_sc[unit];
int port;
int newphase;
u_char pkt[3];
int delay = 0;
struct timeval tv;
port = sc->sc_port;
/*
* Ignore any interrupts that occur if the device is not open.
*/
if(sc->sc_state == 0) return;
newphase = inb(port + tw_zcport) & tw_zcmask;
microtime(&tv);
/*
* NEW PACKET:
* If we aren't currently receiving a packet, set up a new packet
* and put in the first "1" bit that has just arrived.
* Arrange for the reception to be aborted if too much time goes by.
*/
if((sc->sc_state & TWS_RCVING) == 0) {
#ifdef HIRESTIME
twsetuptimes(sc->sc_rtimes);
#endif /* HIRESTIME */
sc->sc_state |= TWS_RCVING;
sc->sc_rcount = 1;
if(sc->sc_state & TWS_XMITTING) sc->sc_flags = TW_RCV_LOCAL;
else sc->sc_flags = 0;
sc->sc_bits = 0;
sc->sc_rphase = newphase;
/* 3 cycles of silence = 3/60 = 1/20 = 50 msec */
sc->abortrcv_ch = timeout(twabortrcv, (caddr_t)sc, hz/20);
sc->sc_rcv_time[0] = tv.tv_usec;
sc->sc_no_rcv = 1;
return;
}
untimeout(twabortrcv, (caddr_t)sc, sc->abortrcv_ch);
sc->abortrcv_ch = timeout(twabortrcv, (caddr_t)sc, hz/20);
newphase = inb(port + tw_zcport) & tw_zcmask;
/* enforce a minimum delay since the last interrupt */
delay = tv.tv_usec - sc->sc_rcv_time[sc->sc_no_rcv - 1];
if (delay < 0)
delay += 1000000;
if (delay < TW_MIN_DELAY)
return;
sc->sc_rcv_time[sc->sc_no_rcv] = tv.tv_usec;
if (sc->sc_rcv_time[sc->sc_no_rcv] < sc->sc_rcv_time[0])
sc->sc_rcv_time[sc->sc_no_rcv] += 1000000;
sc->sc_no_rcv++;
/*
* START CODE:
* The second and third bits are a special case.
*/
if (sc->sc_rcount < 3) {
if (
#ifdef HIRESTIME
tw_is_within(delay, HALFCYCLE, HALFCYCLE / 6)
#else
newphase != sc->sc_rphase
#endif
) {
sc->sc_rcount++;
} else {
/*
* Invalid start code -- abort reception.
*/
sc->sc_state &= ~TWS_RCVING;
sc->sc_flags |= TW_RCV_ERROR;
untimeout(twabortrcv, (caddr_t)sc, sc->abortrcv_ch);
log(LOG_ERR, "TWRCV: Invalid start code\n");
twdebugtimes(sc);
sc->sc_no_rcv = 0;
return;
}
if(sc->sc_rcount == 3) {
/*
* We've gotten three "1" bits in a row. The start code
* is really 1110, but this might be followed by a zero
* bit from the house code, so if we wait any longer we
* might be confused about the first house code bit.
* So, we guess that the start code is correct and insert
* the trailing zero without actually having seen it.
* We don't change sc_rphase in this case, because two
* bit arrivals in a row preserve parity.
*/
sc->sc_rcount++;
return;
}
/*
* Update sc_rphase to the current phase before returning.
*/
sc->sc_rphase = newphase;
return;
}
/*
* GENERAL CASE:
* Now figure out what the current bit is that just arrived.
* The X-10 protocol transmits each data bit twice: once in
* true form and once in complemented form on the next half
* cycle. So, there will be at least one interrupt per bit.
* By comparing the phase we see at the time of the interrupt
* with the saved sc_rphase, we can tell on which half cycle
* the interrupt occrred. This assumes, of course, that the
* packet is well-formed. We do the best we can at trying to
* catch errors by aborting if too much time has gone by, and
* by tossing out a packet if too many bits arrive, but the
* whole scheme is probably not as robust as if we had a nice
* interrupt on every half cycle of the power line.
* If we have high-resolution time-of-day routines, then we
* can do a bit more sanity checking.
*/
/*
* A complete packet is 22 half cycles.
*/
if(sc->sc_rcount <= 20) {
#ifdef HIRESTIME
int bit = 0, last_bit;
if (sc->sc_rcount == 4)
last_bit = 1; /* Start (1110) ends in 10, a 'one' code. */
else
last_bit = sc->sc_bits & 0x1;
if ( ( (last_bit == 1)
&& (tw_is_within(delay, HALFCYCLE * 2, HALFCYCLE / 6)))
|| ( (last_bit == 0)
&& (tw_is_within(delay, HALFCYCLE * 1, HALFCYCLE / 6))))
bit = 1;
else if ( ( (last_bit == 1)
&& (tw_is_within(delay, HALFCYCLE * 3, HALFCYCLE / 6)))
|| ( (last_bit == 0)
&& (tw_is_within(delay, HALFCYCLE * 2, HALFCYCLE / 6))))
bit = 0;
else {
sc->sc_flags |= TW_RCV_ERROR;
log(LOG_ERR, "TWRCV: %d cycle after %d bit, delay %d%%\n",
sc->sc_rcount, last_bit, 100 * delay / HALFCYCLE);
}
sc->sc_bits = (sc->sc_bits << 1) | bit;
#else
sc->sc_bits = (sc->sc_bits << 1)
| ((newphase == sc->sc_rphase) ? 0x0 : 0x1);
#endif /* HIRESTIME */
sc->sc_rcount += 2;
}
if(sc->sc_rcount >= 22 || sc->sc_flags & TW_RCV_ERROR) {
if(sc->sc_rcount != 22) {
sc->sc_flags |= TW_RCV_ERROR;
pkt[0] = sc->sc_flags;
pkt[1] = pkt[2] = 0;
} else {
pkt[0] = sc->sc_flags;
pkt[1] = X10_HOUSE_INV[(sc->sc_bits & 0x1e0) >> 5];
pkt[2] = X10_KEY_INV[sc->sc_bits & 0x1f];
}
sc->sc_state &= ~TWS_RCVING;
twputpkt(sc, pkt);
untimeout(twabortrcv, (caddr_t)sc, sc->abortrcv_ch);
if(sc->sc_flags & TW_RCV_ERROR) {
log(LOG_ERR, "TWRCV: invalid packet: (%d, %x) %c %s\n",
sc->sc_rcount, sc->sc_bits, 'A' + pkt[1], X10_KEY_LABEL[pkt[2]]);
twdebugtimes(sc);
} else {
/* log(LOG_ERR, "TWRCV: valid packet: (%d, %x) %c %s\n",
sc->sc_rcount, sc->sc_bits, 'A' + pkt[1], X10_KEY_LABEL[pkt[2]]); */
}
sc->sc_rcount = 0;
wakeup((caddr_t)sc);
}
}
static void twdebugtimes(struct tw_sc *sc)
{
int i;
for (i = 0; (i < sc->sc_no_rcv) && (i < SC_RCV_TIME_LEN); i++)
log(LOG_ERR, "TWRCV: interrupt %2d: %d\t%d%%\n", i, sc->sc_rcv_time[i],
(sc->sc_rcv_time[i] - sc->sc_rcv_time[(i?i-1:0)])*100/HALFCYCLE);
}
#ifdef HIRESTIME
/*
* Initialize an array of 22 times, starting from the current
* microtime and continuing for the next 21 half cycles.
* We use the times as a reference to make sure transmission
* or reception is on schedule.
*/
static void twsetuptimes(int *a)
{
struct timeval tv;
int i, t;
microtime(&tv);
t = tv.tv_usec;
for(i = 0; i < 22; i++) {
*a++ = t;
t += HALFCYCLE;
if(t >= 1000000) t -= 1000000;
}
}
/*
* Check the current time against a slot in a previously set up
* timing array, and make sure that it looks like we are still
* on schedule.
*/
static int twchecktime(int target, int tol)
{
struct timeval tv;
int t, d;
microtime(&tv);
t = tv.tv_usec;
d = (target - t) >= 0 ? (target - t) : (t - target);
if(d > 500000) d = 1000000-d;
if(d <= tol && d >= -tol) {
return(1);
} else {
return(0);
}
}
#endif /* HIRESTIME */
Reference in New Issue View Git Blame Copy Permalink