freebsd-nq/share/man/man4/ng_etf.4
Hartmut Brandt 89624a3490 Replace all uses of the old netgraph constants NG_*LEN by the new
constants NG_*SIZ that include the trailing NUL byte. This change
is mostly mechanical except for the replacement of a couple of snprintf()
and sprintf() calls with strlcpy.
2003-11-15 15:26:35 +00:00

155 lines
4.9 KiB
Groff

.\"
.\" Copyright (c) 2001, FreeBSD Inc.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice unmodified, this list of conditions, and the following
.\" disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd February 28, 2001
.Dt NG_ETF 4
.Os
.Sh NAME
.Nm ng_etf
.Nd Ethertype filtering netgraph node type
.Sh SYNOPSIS
.In netgraph/ng_etf.h
.Sh DESCRIPTION
The
.Nm etf
node type multiplexes and filters data between hooks on the basis
of the ethertype found in an ethernet header, presumed to be in the
first 14 bytes of the data.
Incoming Ethernet frames are accepted on the
.Em downstream
hook and if the ethertype matches a value which the node has been configured
to filter, the packet is forwarded out the hook which was identified
at the time that value was configured.
If it does not match a configured
value, it is passed to the
.Em nomatch
hook.
If the
.Em nomatch
hook is not connected, the packet is dropped.
.Pp
Packets travelling in the other direction (towards the
.Em downstream
hook) are also examined and filtered.
If a packet has an ethertype that matches one of the values configured
into the node, it must have arrived in on the hook for which that value
was configured, otherwise it will be discarded.
Ethertypes of values other
than those configured by the control messages must have arrived via the
.Em nomatch
hook.
.Sh HOOKS
This node type supports the following hooks:
.Bl -tag -width ".Em downstream"
.It Em downstream
Typically this hook would be connected to a
.Xr ng_ether 4
node, using the
.Em lower
hook.
.It Em nomatch
Typically this hook would also be connected to an
.Xr ng_ether 4
type node using the
.Em upper
hook.
.It Aq Em "any legal name"
Any other hook name will be accepted and can be used as the match target
of an ethertype.
Typically this hook would be attached to
a protocol handling node that requires and generates packets
with a particular set of ethertypes.
.El
.Sh CONTROL MESSAGES
This node type supports the generic control messages, plus the following:
.Bl -tag -width 4n
.It Dv NGM_ETF_GET_STATUS
This command returns a
.Vt "struct ng_etfstat"
containing node statistics for packet counts.
.It Dv NGM_ETF_SET_FILTER
Sets the a new ethertype filter into the node and specifies the hook to and
from which packets of that type should use.
The hook and ethertype
are specified in a structure of type
.Vt "struct ng_etffilter" :
.Bd -literal -offset 4n
struct ng_etffilter {
char matchhook[NG_HOOKSIZ]; /* hook name */
u_int16_t ethertype; /* catch these */
};
.Ed
.El
.Sh EXAMPLES
Using
.Xr ngctl 8
it is possible to set a filter in place from the command line
as follows:
.Bd -literal -offset 4n
#!/bin/sh
ETHER_IF=lnc0
MATCH1=0x834
MATCH2=0x835
cat <<DONE >/tmp/xwert
# Make a new ethertype filter and attach to the ethernet lower hook.
# first remove left over bits from last time.
shutdown ${ETHER_IF}:lower
mkpeer ${ETHER_IF}: etf lower downstream
# Give it a name to easily refer to it.
name ${ETHER_IF}:lower etf
# Connect the nomatch hook to the upper part of the same interface.
# All unmatched packets will act as if the filter is not present.
connect ${ETHER_IF}: etf: upper nomatch
DONE
ngctl -f /tmp/xwert
# something to set a hook to catch packets and show them.
echo "Unrecognised packets:"
nghook -a etf: newproto &
# Filter two random ethertypes to that hook.
ngctl 'msg etf: setfilter { matchhook="newproto" ethertype=${MATCH1} }
ngctl 'msg etf: setfilter { matchhook="newproto" ethertype=${MATCH2} }
DONE
.Ed
.Sh SHUTDOWN
This node shuts down upon receipt of a
.Dv NGM_SHUTDOWN
control message, or when all hooks have been disconnected.
.Sh SEE ALSO
.Xr netgraph 4 ,
.Xr ng_ether 4 ,
.Xr ngctl 8 ,
.Xr nghook 8
.Sh HISTORY
The
.Nm
node type was implemented in
.Fx 5.0 .
.Sh AUTHORS
.An Julian Elischer Aq julian@FreeBSD.org