freebsd-nq/sys/dev/isci/isci_interrupt.c
Jim Harris dd92530581 Wait until completion context unwinds before retrying CCBs that have been
queued internally.  This works around issue in the isci HAL where it cannot
accept new I/O to a device after a resetting->ready state transition until
the completion context has unwound.

This issue was found by submitting non-tagged CCBs through pass(4) interface
to a SATA disk with an extremely small timeout value (5ms).  This would trigger
internal resets with I/O in the isci(4) internal queues.

The small timeout value had not been intentional (and original reporter has
since changed his test to use 5sec instead), but it did uncover this corner
case that would result in a hung disk.

Sponsored by: Intel
Reported and tested by: Ravi Pokala <rpokala at panasas dot com>
Reviewed by: scottl (earlier version)
MFC after: 1 week
2012-05-21 22:54:33 +00:00

240 lines
7.5 KiB
C

/*-
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <dev/isci/isci.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/isci/scil/scif_controller.h>
void isci_interrupt_legacy_handler(void *arg);
void isci_interrupt_msix_handler(void *arg);
static int
isci_interrupt_setup_legacy(struct isci_softc *isci)
{
struct ISCI_INTERRUPT_INFO *interrupt_info = &isci->interrupt_info[0];
isci->num_interrupts = 1;
scic_controller_get_handler_methods(SCIC_LEGACY_LINE_INTERRUPT_TYPE,
0, &isci->handlers[0]);
interrupt_info->handlers = &isci->handlers[0];
interrupt_info->rid = 0;
interrupt_info->interrupt_target_handle = (void *)isci;
interrupt_info->res = bus_alloc_resource_any(isci->device, SYS_RES_IRQ,
&interrupt_info->rid, RF_SHAREABLE|RF_ACTIVE);
if (interrupt_info->res == NULL) {
isci_log_message(0, "ISCI", "bus_alloc_resource failed\n");
return (-1);
}
interrupt_info->tag = NULL;
if (bus_setup_intr(isci->device, interrupt_info->res,
INTR_TYPE_CAM | INTR_MPSAFE, NULL, isci_interrupt_legacy_handler,
interrupt_info, &interrupt_info->tag)) {
isci_log_message(0, "ISCI", "bus_setup_intr failed\n");
return (-1);
}
return (0);
}
static int
isci_interrupt_setup_msix(struct isci_softc *isci)
{
uint32_t controller_index;
scic_controller_get_handler_methods(SCIC_MSIX_INTERRUPT_TYPE,
SCI_MAX_MSIX_MESSAGES_PER_CONTROLLER, &isci->handlers[0]);
for (controller_index = 0; controller_index < isci->controller_count;
controller_index++) {
uint32_t msix_index;
uint8_t base_index = controller_index *
SCI_MAX_MSIX_MESSAGES_PER_CONTROLLER;
for (msix_index = 0; msix_index < SCI_MAX_MSIX_MESSAGES_PER_CONTROLLER;
msix_index++) {
struct ISCI_INTERRUPT_INFO *info =
&isci->interrupt_info[base_index+msix_index];
info->handlers = &isci->handlers[msix_index];
info->interrupt_target_handle =
&isci->controllers[controller_index];
info->rid = base_index+msix_index+1;
info->res = bus_alloc_resource_any(isci->device,
SYS_RES_IRQ, &info->rid, RF_ACTIVE);
if (info->res == NULL) {
isci_log_message(0, "ISCI",
"bus_alloc_resource failed\n");
return (-1);
}
info->tag = NULL;
if (bus_setup_intr(isci->device, info->res,
INTR_TYPE_CAM | INTR_MPSAFE, NULL,
isci_interrupt_msix_handler, info, &info->tag)) {
isci_log_message(0, "ISCI",
"bus_setup_intr failed\n");
return (-1);
}
}
}
return (0);
}
void
isci_interrupt_setup(struct isci_softc *isci)
{
uint8_t max_msix_messages = SCI_MAX_MSIX_MESSAGES_PER_CONTROLLER *
isci->controller_count;
BOOL use_msix = FALSE;
uint32_t force_legacy_interrupts = 0;
TUNABLE_INT_FETCH("hw.isci.force_legacy_interrupts",
&force_legacy_interrupts);
if (!force_legacy_interrupts &&
pci_msix_count(isci->device) >= max_msix_messages) {
isci->num_interrupts = max_msix_messages;
pci_alloc_msix(isci->device, &isci->num_interrupts);
if (isci->num_interrupts == max_msix_messages)
use_msix = TRUE;
}
if (use_msix == TRUE)
isci_interrupt_setup_msix(isci);
else
isci_interrupt_setup_legacy(isci);
}
void
isci_interrupt_legacy_handler(void *arg)
{
struct ISCI_INTERRUPT_INFO *interrupt_info =
(struct ISCI_INTERRUPT_INFO *)arg;
struct isci_softc *isci =
(struct isci_softc *)interrupt_info->interrupt_target_handle;
SCIC_CONTROLLER_INTERRUPT_HANDLER interrupt_handler;
SCIC_CONTROLLER_COMPLETION_HANDLER completion_handler;
int index;
interrupt_handler = interrupt_info->handlers->interrupt_handler;
completion_handler = interrupt_info->handlers->completion_handler;
for (index = 0; index < isci->controller_count; index++) {
struct ISCI_CONTROLLER *controller = &isci->controllers[index];
/* If controller_count > 0, we will get interrupts here for
* controller 0 before controller 1 has even started. So
* we need to make sure we don't call the completion handler
* for a non-started controller.
*/
if (controller->is_started == TRUE) {
SCI_CONTROLLER_HANDLE_T scic_controller_handle =
scif_controller_get_scic_handle(
controller->scif_controller_handle);
if (interrupt_handler(scic_controller_handle)) {
mtx_lock(&controller->lock);
completion_handler(scic_controller_handle);
if (controller->release_queued_ccbs == TRUE)
isci_controller_release_queued_ccbs(
controller);
mtx_unlock(&controller->lock);
}
}
}
}
void
isci_interrupt_msix_handler(void *arg)
{
struct ISCI_INTERRUPT_INFO *interrupt_info =
(struct ISCI_INTERRUPT_INFO *)arg;
struct ISCI_CONTROLLER *controller =
(struct ISCI_CONTROLLER *)interrupt_info->interrupt_target_handle;
SCIC_CONTROLLER_INTERRUPT_HANDLER interrupt_handler;
SCIC_CONTROLLER_COMPLETION_HANDLER completion_handler;
interrupt_handler = interrupt_info->handlers->interrupt_handler;
completion_handler = interrupt_info->handlers->completion_handler;
SCI_CONTROLLER_HANDLE_T scic_controller_handle;
scic_controller_handle = scif_controller_get_scic_handle(
controller->scif_controller_handle);
if (interrupt_handler(scic_controller_handle)) {
mtx_lock(&controller->lock);
completion_handler(scic_controller_handle);
/*
* isci_controller_release_queued_ccb() is a relatively
* expensive routine, so we don't call it until the controller
* level flag is set to TRUE.
*/
if (controller->release_queued_ccbs == TRUE)
isci_controller_release_queued_ccbs(controller);
mtx_unlock(&controller->lock);
}
}
void
isci_interrupt_poll_handler(struct ISCI_CONTROLLER *controller)
{
SCI_CONTROLLER_HANDLE_T scic_controller =
scif_controller_get_scic_handle(controller->scif_controller_handle);
SCIC_CONTROLLER_HANDLER_METHODS_T handlers;
scic_controller_get_handler_methods(SCIC_NO_INTERRUPTS, 0x0, &handlers);
if(handlers.interrupt_handler(scic_controller) == TRUE) {
/* Do not acquire controller lock in this path. xpt
* poll routine will get called with this lock already
* held, so we can't acquire it again here. Other users
* of this function must acquire the lock explicitly
* before calling this handler.
*/
handlers.completion_handler(scic_controller);
}
}