freebsd-nq/sys/arm/freescale/imx/imx6_ccm.c

/*-
 * Copyright (c) 2013 Ian Lepore <ian@freebsd.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

/*
 * Clocks and power control driver for Freescale i.MX6 family of SoCs.
 */

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/rman.h>

#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>

#include <machine/bus.h>

#include <arm/freescale/imx/imx6_anatopreg.h>
#include <arm/freescale/imx/imx6_anatopvar.h>
#include <arm/freescale/imx/imx_machdep.h>
#include <arm/freescale/imx/imx6_ccmreg.h>


/* XXX temp kludge for imx51_get_clock. */
#include <arm/freescale/imx/imx51_ccmvar.h>
#include <arm/freescale/imx/imx51_ccmreg.h>

struct ccm_softc {
	device_t	dev;
	struct resource	*mem_res;
};

static struct ccm_softc *ccm_sc;

static inline uint32_t
RD4(struct ccm_softc *sc, bus_size_t off)
{

	return (bus_read_4(sc->mem_res, off));
}

static inline void
WR4(struct ccm_softc *sc, bus_size_t off, uint32_t val)
{

	bus_write_4(sc->mem_res, off, val);
}

static int
ccm_detach(device_t dev)
{
	struct ccm_softc *sc;

	sc = device_get_softc(dev);

	if (sc->mem_res != NULL)
		bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->mem_res);

	return (0);
}

static int
ccm_attach(device_t dev)
{
	struct ccm_softc *sc;
	int err, rid;

	sc = device_get_softc(dev);
	err = 0;

	/* Allocate bus_space resources. */
	rid = 0;
	sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
	    RF_ACTIVE);
	if (sc->mem_res == NULL) {
		device_printf(dev, "Cannot allocate memory resources\n");
		err = ENXIO;
		goto out;
	}

	ccm_sc = sc;
	err = 0;

out:

	if (err != 0)
		ccm_detach(dev);

	return (err);
}

static int
ccm_probe(device_t dev)
{

	if (!ofw_bus_status_okay(dev))
		return (ENXIO);

        if (ofw_bus_is_compatible(dev, "fsl,imx6q-ccm") == 0)
		return (ENXIO);

	device_set_desc(dev, "Freescale i.MX6 Clock Control Module");

	return (BUS_PROBE_DEFAULT);
}

void
imx_ccm_usb_enable(device_t _usbdev)
{

	/*
	 * For imx6, the USBOH3 clock gate is bits 0-1 of CCGR6, so no need for
	 * shifting and masking here, just set the low-order two bits to ALWAYS.
	 */
	WR4(ccm_sc, CCM_CCGR6, RD4(ccm_sc, CCM_CCGR6) | CCGR_CLK_MODE_ALWAYS);
}

void
imx_ccm_usbphy_enable(device_t _phydev)
{
        /*
         * XXX Which unit?
         * Right now it's not clear how to figure from fdt data which phy unit
         * we're supposed to operate on.  Until this is worked out, just enable
         * both PHYs.
         */
#if 0
	int phy_num, regoff;

	phy_num = 0; /* XXX */

	switch (phy_num) {
	case 0:
		regoff = 0;
		break;
	case 1:
		regoff = 0x10;
		break;
	default:
		device_printf(ccm_sc->dev, "Bad PHY number %u,\n", 
		    phy_num);
		return;
	}

	imx6_anatop_write_4(IMX6_ANALOG_CCM_PLL_USB1 + regoff, 
	    IMX6_ANALOG_CCM_PLL_USB_ENABLE | 
	    IMX6_ANALOG_CCM_PLL_USB_POWER |
	    IMX6_ANALOG_CCM_PLL_USB_EN_USB_CLKS);
#else
	imx6_anatop_write_4(IMX6_ANALOG_CCM_PLL_USB1 + 0,
	    IMX6_ANALOG_CCM_PLL_USB_ENABLE | 
	    IMX6_ANALOG_CCM_PLL_USB_POWER |
	    IMX6_ANALOG_CCM_PLL_USB_EN_USB_CLKS);

	imx6_anatop_write_4(IMX6_ANALOG_CCM_PLL_USB1 + 0x10, 
	    IMX6_ANALOG_CCM_PLL_USB_ENABLE | 
	    IMX6_ANALOG_CCM_PLL_USB_POWER |
	    IMX6_ANALOG_CCM_PLL_USB_EN_USB_CLKS);
#endif
}





// XXX Fix this.  This has to be here for other code to link,
// but it doesn't have to return anything useful for imx6 right now.
u_int
imx51_get_clock(enum imx51_clock clk)
{
	switch (clk)
	{
	case IMX51CLK_IPG_CLK_ROOT:
		return 66000000;
	default:
		printf("imx51_get_clock() on imx6 doesn't know about clock %d\n", clk);
		break;
	}
	return 0;
}

static device_method_t ccm_methods[] = {
	/* Device interface */
	DEVMETHOD(device_probe,  ccm_probe),
	DEVMETHOD(device_attach, ccm_attach),
	DEVMETHOD(device_detach, ccm_detach),

	DEVMETHOD_END
};

static driver_t ccm_driver = {
	"ccm",
	ccm_methods,
	sizeof(struct ccm_softc)
};

static devclass_t ccm_devclass;

DRIVER_MODULE(ccm, simplebus, ccm_driver, ccm_devclass, 0, 0);