7a22215c53
shifts into the sign bit. Instead use (1U << 31) which gets the expected result. This fix is not ideal as it assumes a 32 bit int, but does fix the issue for most cases. A similar change was made in OpenBSD. Discussed with: -arch, rdivacky Reviewed by: cperciva
662 lines
24 KiB
C
662 lines
24 KiB
C
/*-
|
|
* Copyright (c) 2011 Jakub Wojciech Klama <jceel@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _ARM_LPC_LPCREG_H
|
|
#define _ARM_LPC_LPCREG_H
|
|
|
|
#define LPC_DEV_PHYS_BASE 0x40000000
|
|
#define LPC_DEV_P5_PHYS_BASE 0x20000000
|
|
#define LPC_DEV_P6_PHYS_BASE 0x30000000
|
|
#define LPC_DEV_BASE 0xd0000000
|
|
#define LPC_DEV_SIZE 0x10000000
|
|
|
|
/*
|
|
* Interrupt controller (from UM10326: LPC32x0 User manual, page 87)
|
|
|
|
*/
|
|
#define LPC_INTC_MIC_ER 0x0000
|
|
#define LPC_INTC_MIC_RSR 0x0004
|
|
#define LPC_INTC_MIC_SR 0x0008
|
|
#define LPC_INTC_MIC_APR 0x000c
|
|
#define LPC_INTC_MIC_ATR 0x0010
|
|
#define LPC_INTC_MIC_ITR 0x0014
|
|
#define LPC_INTC_SIC1_ER 0x4000
|
|
#define LPC_INTC_SIC1_RSR 0x4004
|
|
#define LPC_INTC_SIC1_SR 0x4008
|
|
#define LPC_INTC_SIC1_APR 0x400c
|
|
#define LPC_INTC_SIC1_ATR 0x4010
|
|
#define LPC_INTC_SIC1_ITR 0x4014
|
|
#define LPC_INTC_SIC2_ER 0x8000
|
|
#define LPC_INTC_SIC2_RSR 0x8004
|
|
#define LPC_INTC_SIC2_SR 0x8008
|
|
#define LPC_INTC_SIC2_APR 0x800c
|
|
#define LPC_INTC_SIC2_ATR 0x8010
|
|
#define LPC_INTC_SIC2_ITR 0x8014
|
|
|
|
|
|
/*
|
|
* Timer 0|1|2|3|4|5. (from UM10326: LPC32x0 User manual, page 540)
|
|
*/
|
|
#define LPC_TIMER_IR 0x00
|
|
#define LPC_TIMER_TCR 0x04
|
|
#define LPC_TIMER_TCR_ENABLE (1 << 0)
|
|
#define LPC_TIMER_TCR_RESET (1 << 1)
|
|
#define LPC_TIMER_TC 0x08
|
|
#define LPC_TIMER_PR 0x0c
|
|
#define LPC_TIMER_PC 0x10
|
|
#define LPC_TIMER_MCR 0x14
|
|
#define LPC_TIMER_MCR_MR0I (1 << 0)
|
|
#define LPC_TIMER_MCR_MR0R (1 << 1)
|
|
#define LPC_TIMER_MCR_MR0S (1 << 2)
|
|
#define LPC_TIMER_MCR_MR1I (1 << 3)
|
|
#define LPC_TIMER_MCR_MR1R (1 << 4)
|
|
#define LPC_TIMER_MCR_MR1S (1 << 5)
|
|
#define LPC_TIMER_MCR_MR2I (1 << 6)
|
|
#define LPC_TIMER_MCR_MR2R (1 << 7)
|
|
#define LPC_TIMER_MCR_MR2S (1 << 8)
|
|
#define LPC_TIMER_MCR_MR3I (1 << 9)
|
|
#define LPC_TIMER_MCR_MR3R (1 << 10)
|
|
#define LPC_TIMER_MCR_MR3S (1 << 11)
|
|
#define LPC_TIMER_MR0 0x18
|
|
#define LPC_TIMER_CTCR 0x70
|
|
|
|
/*
|
|
* Watchdog timer. (from UM10326: LPC32x0 User manual, page 572)
|
|
*/
|
|
#define LPC_WDTIM_BASE (LPC_DEV_BASE + 0x3c000)
|
|
#define LPC_WDTIM_INT 0x00
|
|
#define LPC_WDTIM_CTRL 0x04
|
|
#define LPC_WDTIM_COUNTER 0x08
|
|
#define LPC_WDTIM_MCTRL 0x0c
|
|
#define LPC_WDTIM_MATCH0 0x10
|
|
#define LPC_WDTIM_EMR 0x14
|
|
#define LPC_WDTIM_PULSE 0x18
|
|
#define LPC_WDTIM_RES 0x1c
|
|
|
|
/*
|
|
* Clocking and power control. (from UM10326: LPC32x0 User manual, page 58)
|
|
*/
|
|
#define LPC_CLKPWR_BASE (LPC_DEV_BASE + 0x4000)
|
|
#define LPC_CLKPWR_PWR_CTRL 0x44
|
|
#define LPC_CLKPWR_OSC_CTRL 0x4c
|
|
#define LPC_CLKPWR_SYSCLK_CTRL 0x50
|
|
#define LPC_CLKPWR_PLL397_CTRL 0x48
|
|
#define LPC_CLKPWR_HCLKPLL_CTRL 0x58
|
|
#define LPC_CLKPWR_HCLKDIV_CTRL 0x40
|
|
#define LPC_CLKPWR_TEST_CTRL 0xa4
|
|
#define LPC_CLKPWR_AUTOCLK_CTRL 0xec
|
|
#define LPC_CLKPWR_START_ER_PIN 0x30
|
|
#define LPC_CLKPWR_START_ER_INT 0x20
|
|
#define LPC_CLKPWR_P0_INTR_ER 0x18
|
|
#define LPC_CLKPWR_START_SR_PIN 0x38
|
|
#define LPC_CLKPWR_START_SR_INT 0x28
|
|
#define LPC_CLKPWR_START_RSR_PIN 0x34
|
|
#define LPC_CLKPWR_START_RSR_INT 0x24
|
|
#define LPC_CLKPWR_START_APR_PIN 0x3c
|
|
#define LPC_CLKPWR_START_APR_INT 0x2c
|
|
#define LPC_CLKPWR_USB_CTRL 0x64
|
|
#define LPC_CLKPWR_USB_CTRL_SLAVE_HCLK (1 << 24)
|
|
#define LPC_CLKPWR_USB_CTRL_I2C_EN (1 << 23)
|
|
#define LPC_CLKPWR_USB_CTRL_DEV_NEED_CLK_EN (1 << 22)
|
|
#define LPC_CLKPWR_USB_CTRL_HOST_NEED_CLK_EN (1 << 21)
|
|
#define LPC_CLKPWR_USB_CTRL_BUSKEEPER (1 << 19)
|
|
#define LPC_CLKPWR_USB_CTRL_CLK_EN2 (1 << 18)
|
|
#define LPC_CLKPWR_USB_CTRL_CLK_EN1 (1 << 17)
|
|
#define LPC_CLKPWR_USB_CTRL_PLL_PDOWN (1 << 16)
|
|
#define LPC_CLKPWR_USB_CTRL_BYPASS (1 << 15)
|
|
#define LPC_CLKPWR_USB_CTRL_DIRECT_OUT (1 << 14)
|
|
#define LPC_CLKPWR_USB_CTRL_FEEDBACK (1 << 13)
|
|
#define LPC_CLKPWR_USB_CTRL_POSTDIV(_x) ((_x & 0x3) << 11)
|
|
#define LPC_CLKPWR_USB_CTRL_PREDIV(_x) ((_x & 0x3) << 9)
|
|
#define LPC_CLKPWR_USB_CTRL_FDBKDIV(_x) (((_x-1) & 0xff) << 1)
|
|
#define LPC_CLKPWR_USB_CTRL_PLL_LOCK (1 << 0)
|
|
#define LPC_CLKPWR_USBDIV_CTRL 0x1c
|
|
#define LPC_CLKPWR_MS_CTRL 0x80
|
|
#define LPC_CLKPWR_MS_CTRL_DISABLE_SD (1 << 10)
|
|
#define LPC_CLKPWR_MS_CTRL_CLOCK_EN (1 << 9)
|
|
#define LPC_CLKPWR_MS_CTRL_MSSDIO23_PAD (1 << 8)
|
|
#define LPC_CLKPWR_MS_CTRL_MSSDIO1_PAD (1 << 7)
|
|
#define LPC_CLKPWR_MS_CTRL_MSSDIO0_PAD (1 << 6)
|
|
#define LPC_CLKPWR_MS_CTRL_SD_CLOCK (1 << 5)
|
|
#define LPC_CLKPWR_MS_CTRL_CLKDIV_MASK 0xf
|
|
#define LPC_CLKPWR_DMACLK_CTRL 0xe8
|
|
#define LPC_CLKPWR_DMACLK_CTRL_EN (1 << 0)
|
|
#define LPC_CLKPWR_FLASHCLK_CTRL 0xc8
|
|
#define LPC_CLKPWR_MACCLK_CTRL 0x90
|
|
#define LPC_CLKPWR_MACCLK_CTRL_REG (1 << 0)
|
|
#define LPC_CLKPWR_MACCLK_CTRL_SLAVE (1 << 1)
|
|
#define LPC_CLKPWR_MACCLK_CTRL_MASTER (1 << 2)
|
|
#define LPC_CLKPWR_MACCLK_CTRL_HDWINF(_n) ((_n & 0x3) << 3)
|
|
#define LPC_CLKPWR_LCDCLK_CTRL 0x54
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_DISPTYPE (1 << 8)
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_MODE(_n) ((_n & 0x3) << 6)
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_MODE_12 0x0
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_MODE_15 0x1
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_MODE_16 0x2
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_MODE_24 0x3
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_HCLKEN (1 << 5)
|
|
#define LPC_CLKPWR_LCDCLK_CTRL_CLKDIV(_n) ((_n) & 0x1f)
|
|
#define LPC_CLKPWR_I2S_CTRL 0x7c
|
|
#define LPC_CLKPWR_SSP_CTRL 0x78
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP1RXDMA (1 << 5)
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP1TXDMA (1 << 4)
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP0RXDMA (1 << 3)
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP0TXDMA (1 << 2)
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP1EN (1 << 1)
|
|
#define LPC_CLKPWR_SSP_CTRL_SSP0EN (1 << 0)
|
|
#define LPC_CLKPWR_SPI_CTRL 0xc4
|
|
#define LPC_CLKPWR_I2CCLK_CTRL 0xac
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1 0xc0
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER4 (1 << 0)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER5 (1 << 1)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER0 (1 << 2)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER1 (1 << 3)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER2 (1 << 4)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_TIMER3 (1 << 5)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL1_MOTORCTL (1 << 6)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL 0xbc
|
|
#define LPC_CLKPWR_TIMCLK_CTRL_WATCHDOG (1 << 0)
|
|
#define LPC_CLKPWR_TIMCLK_CTRL_HSTIMER (1 << 1)
|
|
#define LPC_CLKPWR_ADCLK_CTRL 0xb4
|
|
#define LPC_CLKPWR_ADCLK_CTRL1 0x60
|
|
#define LPC_CLKPWR_KEYCLK_CTRL 0xb0
|
|
#define LPC_CLKPWR_PWMCLK_CTRL 0xb8
|
|
#define LPC_CLKPWR_UARTCLK_CTRL 0xe4
|
|
#define LPC_CLKPWR_POS0_IRAM_CTRL 0x110
|
|
#define LPC_CLKPWR_POS1_IRAM_CTRL 0x114
|
|
|
|
/* Additional UART registers in CLKPWR address space. */
|
|
#define LPC_CLKPWR_UART_U3CLK 0xd0
|
|
#define LPC_CLKPWR_UART_U4CLK 0xd4
|
|
#define LPC_CLKPWR_UART_U5CLK 0xd8
|
|
#define LPC_CLKPWR_UART_U6CLK 0xdc
|
|
#define LPC_CLKPWR_UART_UCLK_HCLK (1 << 16)
|
|
#define LPC_CLKPWR_UART_UCLK_X(_n) (((_n) & 0xff) << 8)
|
|
#define LPC_CLKPWR_UART_UCLK_Y(_n) ((_n) & 0xff)
|
|
#define LPC_CLKPWR_UART_IRDACLK 0xe0
|
|
|
|
/* Additional UART registers */
|
|
#define LPC_UART_BASE (LPC_DEV_BASE + 0x80000)
|
|
#define LPC_UART_CONTROL_BASE (LPC_DEV_BASE + 0x54000)
|
|
#define LPC_UART5_BASE (LPC_DEV_BASE + 0x90000)
|
|
#define LPC_UART_CTRL 0x00
|
|
#define LPC_UART_CLKMODE 0x04
|
|
#define LPC_UART_CLKMODE_UART3(_n) (((_n) & 0x3) << 4)
|
|
#define LPC_UART_CLKMODE_UART4(_n) (((_n) & 0x3) << 6)
|
|
#define LPC_UART_CLKMODE_UART5(_n) (((_n) & 0x3) << 8)
|
|
#define LPC_UART_CLKMODE_UART6(_n) (((_n) & 0x3) << 10)
|
|
#define LPC_UART_LOOP 0x08
|
|
#define LPC_UART_FIFOSIZE 64
|
|
|
|
/*
|
|
* Real time clock. (from UM10326: LPC32x0 User manual, page 566)
|
|
*/
|
|
#define LPC_RTC_UCOUNT 0x00
|
|
#define LPC_RTC_DCOUNT 0x04
|
|
#define LPC_RTC_MATCH0 0x08
|
|
#define LPC_RTC_MATCH1 0x0c
|
|
#define LPC_RTC_CTRL 0x10
|
|
#define LPC_RTC_CTRL_ONSW (1 << 7)
|
|
#define LPC_RTC_CTRL_DISABLE (1 << 6)
|
|
#define LPC_RTC_CTRL_RTCRESET (1 << 4)
|
|
#define LPC_RTC_CTRL_MATCH0ONSW (1 << 3)
|
|
#define LPC_RTC_CTRL_MATCH1ONSW (1 << 2)
|
|
#define LPC_RTC_CTRL_MATCH1INTR (1 << 1)
|
|
#define LPC_RTC_CTRL_MATCH0INTR (1 << 0)
|
|
#define LPC_RTC_INTSTAT 0x14
|
|
#define LPC_RTC_KEY 0x18
|
|
#define LPC_RTC_SRAM_BEGIN 0x80
|
|
#define LPC_RTC_SRAM_END 0xff
|
|
|
|
/*
|
|
* MMC/SD controller. (from UM10326: LPC32x0 User manual, page 436)
|
|
*/
|
|
#define LPC_SD_BASE (LPC_DEV_P5_PHYS_BASE + 0x98000)
|
|
#define LPC_SD_CLK (13 * 1000 * 1000) // 13Mhz
|
|
#define LPC_SD_POWER 0x00
|
|
#define LPC_SD_POWER_OPENDRAIN (1 << 6)
|
|
#define LPC_SD_POWER_CTRL_OFF 0x00
|
|
#define LPC_SD_POWER_CTRL_UP 0x02
|
|
#define LPC_SD_POWER_CTRL_ON 0x03
|
|
#define LPC_SD_CLOCK 0x04
|
|
#define LPC_SD_CLOCK_WIDEBUS (1 << 11)
|
|
#define LPC_SD_CLOCK_BYPASS (1 << 10)
|
|
#define LPC_SD_CLOCK_PWRSAVE (1 << 9)
|
|
#define LPC_SD_CLOCK_ENABLE (1 << 8)
|
|
#define LPC_SD_CLOCK_CLKDIVMASK 0xff
|
|
#define LPC_SD_ARGUMENT 0x08
|
|
#define LPC_SD_COMMAND 0x0c
|
|
#define LPC_SD_COMMAND_ENABLE (1 << 10)
|
|
#define LPC_SD_COMMAND_PENDING (1 << 9)
|
|
#define LPC_SD_COMMAND_INTERRUPT (1 << 8)
|
|
#define LPC_SD_COMMAND_LONGRSP (1 << 7)
|
|
#define LPC_SD_COMMAND_RESPONSE (1 << 6)
|
|
#define LPC_SD_COMMAND_CMDINDEXMASK 0x3f
|
|
#define LPC_SD_RESPCMD 0x10
|
|
#define LPC_SD_RESP0 0x14
|
|
#define LPC_SD_RESP1 0x18
|
|
#define LPC_SD_RESP2 0x1c
|
|
#define LPC_SD_RESP3 0x20
|
|
#define LPC_SD_DATATIMER 0x24
|
|
#define LPC_SD_DATALENGTH 0x28
|
|
#define LPC_SD_DATACTRL 0x2c
|
|
#define LPC_SD_DATACTRL_BLOCKSIZESHIFT 4
|
|
#define LPC_SD_DATACTRL_BLOCKSIZEMASK 0xf
|
|
#define LPC_SD_DATACTRL_DMAENABLE (1 << 3)
|
|
#define LPC_SD_DATACTRL_MODE (1 << 2)
|
|
#define LPC_SD_DATACTRL_WRITE (0 << 1)
|
|
#define LPC_SD_DATACTRL_READ (1 << 1)
|
|
#define LPC_SD_DATACTRL_ENABLE (1 << 0)
|
|
#define LPC_SD_DATACNT 0x30
|
|
#define LPC_SD_STATUS 0x34
|
|
#define LPC_SD_STATUS_RXDATAAVLBL (1 << 21)
|
|
#define LPC_SD_STATUS_TXDATAAVLBL (1 << 20)
|
|
#define LPC_SD_STATUS_RXFIFOEMPTY (1 << 19)
|
|
#define LPC_SD_STATUS_TXFIFOEMPTY (1 << 18)
|
|
#define LPC_SD_STATUS_RXFIFOFULL (1 << 17)
|
|
#define LPC_SD_STATUS_TXFIFOFULL (1 << 16)
|
|
#define LPC_SD_STATUS_RXFIFOHALFFULL (1 << 15)
|
|
#define LPC_SD_STATUS_TXFIFOHALFEMPTY (1 << 14)
|
|
#define LPC_SD_STATUS_RXACTIVE (1 << 13)
|
|
#define LPC_SD_STATUS_TXACTIVE (1 << 12)
|
|
#define LPC_SD_STATUS_CMDACTIVE (1 << 11)
|
|
#define LPC_SD_STATUS_DATABLOCKEND (1 << 10)
|
|
#define LPC_SD_STATUS_STARTBITERR (1 << 9)
|
|
#define LPC_SD_STATUS_DATAEND (1 << 8)
|
|
#define LPC_SD_STATUS_CMDSENT (1 << 7)
|
|
#define LPC_SD_STATUS_CMDRESPEND (1 << 6)
|
|
#define LPC_SD_STATUS_RXOVERRUN (1 << 5)
|
|
#define LPC_SD_STATUS_TXUNDERRUN (1 << 4)
|
|
#define LPC_SD_STATUS_DATATIMEOUT (1 << 3)
|
|
#define LPC_SD_STATUS_CMDTIMEOUT (1 << 2)
|
|
#define LPC_SD_STATUS_DATACRCFAIL (1 << 1)
|
|
#define LPC_SD_STATUS_CMDCRCFAIL (1 << 0)
|
|
#define LPC_SD_CLEAR 0x38
|
|
#define LPC_SD_MASK0 0x03c
|
|
#define LPC_SD_MASK1 0x40
|
|
#define LPC_SD_FIFOCNT 0x48
|
|
#define LPC_SD_FIFO 0x80
|
|
|
|
/*
|
|
* USB OTG controller (from UM10326: LPC32x0 User manual, page 410)
|
|
*/
|
|
#define LPC_OTG_INT_STATUS 0x100
|
|
#define LPC_OTG_INT_ENABLE 0x104
|
|
#define LPC_OTG_INT_SET 0x108
|
|
#define LPC_OTG_INT_CLEAR 0x10c
|
|
#define LPC_OTG_STATUS 0x110
|
|
#define LPC_OTG_STATUS_ATOB_HNP_TRACK (1 << 9)
|
|
#define LPC_OTG_STATUS_BTOA_HNP_TACK (1 << 8)
|
|
#define LPC_OTG_STATUS_TRANSP_I2C_EN (1 << 7)
|
|
#define LPC_OTG_STATUS_TIMER_RESET (1 << 6)
|
|
#define LPC_OTG_STATUS_TIMER_EN (1 << 5)
|
|
#define LPC_OTG_STATUS_TIMER_MODE (1 << 4)
|
|
#define LPC_OTG_STATUS_TIMER_SCALE (1 << 2)
|
|
#define LPC_OTG_STATUS_HOST_EN (1 << 0)
|
|
#define LPC_OTG_TIMER 0x114
|
|
#define LPC_OTG_I2C_TXRX 0x300
|
|
#define LPC_OTG_I2C_STATUS 0x304
|
|
#define LPC_OTG_I2C_STATUS_TFE (1 << 11)
|
|
#define LPC_OTG_I2C_STATUS_TFF (1 << 10)
|
|
#define LPC_OTG_I2C_STATUS_RFE (1 << 9)
|
|
#define LPC_OTG_I2C_STATUS_RFF (1 << 8)
|
|
#define LPC_OTG_I2C_STATUS_SDA (1 << 7)
|
|
#define LPC_OTG_I2C_STATUS_SCL (1 << 6)
|
|
#define LPC_OTG_I2C_STATUS_ACTIVE (1 << 5)
|
|
#define LPC_OTG_I2C_STATUS_DRSI (1 << 4)
|
|
#define LPC_OTG_I2C_STATUS_DRMI (1 << 3)
|
|
#define LPC_OTG_I2C_STATUS_NAI (1 << 2)
|
|
#define LPC_OTG_I2C_STATUS_AFI (1 << 1)
|
|
#define LPC_OTG_I2C_STATUS_TDI (1 << 0)
|
|
#define LPC_OTG_I2C_CTRL 0x308
|
|
#define LPC_OTG_I2C_CTRL_SRST (1 << 8)
|
|
#define LPC_OTG_I2C_CTRL_TFFIE (1 << 7)
|
|
#define LPC_OTG_I2C_CTRL_RFDAIE (1 << 6)
|
|
#define LPC_OTG_I2C_CTRL_RFFIE (1 << 5)
|
|
#define LPC_OTG_I2C_CTRL_DRSIE (1 << 4)
|
|
#define LPC_OTG_I2C_CTRL_DRMIE (1 << 3)
|
|
#define LPC_OTG_I2C_CTRL_NAIE (1 << 2)
|
|
#define LPC_OTG_I2C_CTRL_AFIE (1 << 1)
|
|
#define LPC_OTG_I2C_CTRL_TDIE (1 << 0)
|
|
#define LPC_OTG_I2C_CLKHI 0x30c
|
|
#define LPC_OTG_I2C_CLKLO 0x310
|
|
#define LPC_OTG_CLOCK_CTRL 0xff4
|
|
#define LPC_OTG_CLOCK_CTRL_AHB_EN (1 << 4)
|
|
#define LPC_OTG_CLOCK_CTRL_OTG_EN (1 << 3)
|
|
#define LPC_OTG_CLOCK_CTRL_I2C_EN (1 << 2)
|
|
#define LPC_OTG_CLOCK_CTRL_DEV_EN (1 << 1)
|
|
#define LPC_OTG_CLOCK_CTRL_HOST_EN (1 << 0)
|
|
#define LPC_OTG_CLOCK_STATUS 0xff8
|
|
|
|
/*
|
|
* ISP3101 USB transceiver registers
|
|
*/
|
|
#define LPC_ISP3101_I2C_ADDR 0x2d
|
|
#define LPC_ISP3101_MODE_CONTROL_1 0x04
|
|
#define LPC_ISP3101_MC1_SPEED_REG (1 << 0)
|
|
#define LPC_ISP3101_MC1_SUSPEND_REG (1 << 1)
|
|
#define LPC_ISP3101_MC1_DAT_SE0 (1 << 2)
|
|
#define LPC_ISP3101_MC1_TRANSPARENT (1 << 3)
|
|
#define LPC_ISP3101_MC1_BDIS_ACON_EN (1 << 4)
|
|
#define LPC_ISP3101_MC1_OE_INT_EN (1 << 5)
|
|
#define LPC_ISP3101_MC1_UART_EN (1 << 6)
|
|
#define LPC_ISP3101_MODE_CONTROL_2 0x12
|
|
#define LPC_ISP3101_MC2_GLOBAL_PWR_DN (1 << 0)
|
|
#define LPC_ISP3101_MC2_SPD_SUSP_CTRL (1 << 1)
|
|
#define LPC_ISP3101_MC2_BI_DI (1 << 2)
|
|
#define LPC_ISP3101_MC2_TRANSP_BDIR0 (1 << 3)
|
|
#define LPC_ISP3101_MC2_TRANSP_BDIR1 (1 << 4)
|
|
#define LPC_ISP3101_MC2_AUDIO_EN (1 << 5)
|
|
#define LPC_ISP3101_MC2_PSW_EN (1 << 6)
|
|
#define LPC_ISP3101_MC2_EN2V7 (1 << 7)
|
|
#define LPC_ISP3101_OTG_CONTROL_1 0x06
|
|
#define LPC_ISP3101_OTG1_DP_PULLUP (1 << 0)
|
|
#define LPC_ISP3101_OTG1_DM_PULLUP (1 << 1)
|
|
#define LPC_ISP3101_OTG1_DP_PULLDOWN (1 << 2)
|
|
#define LPC_ISP3101_OTG1_DM_PULLDOWN (1 << 3)
|
|
#define LPC_ISP3101_OTG1_ID_PULLDOWN (1 << 4)
|
|
#define LPC_ISP3101_OTG1_VBUS_DRV (1 << 5)
|
|
#define LPC_ISP3101_OTG1_VBUS_DISCHRG (1 << 6)
|
|
#define LPC_ISP3101_OTG1_VBUS_CHRG (1 << 7)
|
|
#define LPC_ISP3101_OTG_CONTROL_2 0x10
|
|
#define LPC_ISP3101_OTG_INTR_LATCH 0x0a
|
|
#define LPC_ISP3101_OTG_INTR_FALLING 0x0c
|
|
#define LPC_ISP3101_OTG_INTR_RISING 0x0e
|
|
#define LPC_ISP3101_REG_CLEAR_ADDR 0x01
|
|
|
|
/*
|
|
* LCD Controller (from UM10326: LPC32x0 User manual, page 229)
|
|
*/
|
|
#define LPC_LCD_TIMH 0x00
|
|
#define LPC_LCD_TIMH_HBP(_n) (((_n) & 0xff) << 24)
|
|
#define LPC_LCD_TIMH_HFP(_n) (((_n) & 0xff) << 16)
|
|
#define LPC_LCD_TIMH_HSW(_n) (((_n) & 0xff) << 8)
|
|
#define LPC_LCD_TIMH_PPL(_n) (((_n) / 16 - 1) << 2)
|
|
#define LPC_LCD_TIMV 0x04
|
|
#define LPC_LCD_TIMV_VBP(_n) (((_n) & 0xff) << 24)
|
|
#define LPC_LCD_TIMV_VFP(_n) (((_n) & 0xff) << 16)
|
|
#define LPC_LCD_TIMV_VSW(_n) (((_n) & 0x3f) << 10)
|
|
#define LPC_LCD_TIMV_LPP(_n) ((_n) & 0x1ff)
|
|
#define LPC_LCD_POL 0x08
|
|
#define LPC_LCD_POL_PCD_HI (((_n) & 0x1f) << 27)
|
|
#define LPC_LCD_POL_BCD (1 << 26)
|
|
#define LPC_LCD_POL_CPL(_n) (((_n) & 0x3ff) << 16)
|
|
#define LPC_LCD_POL_IOE (1 << 14)
|
|
#define LPC_LCD_POL_IPC (1 << 13)
|
|
#define LPC_LCD_POL_IHS (1 << 12)
|
|
#define LPC_LCD_POL_IVS (1 << 11)
|
|
#define LPC_LCD_POL_ACB(_n) ((_n & 0x1f) << 6)
|
|
#define LPC_LCD_POL_CLKSEL (1 << 5)
|
|
#define LPC_LCD_POL_PCD_LO(_n) ((_n) & 0x1f)
|
|
#define LPC_LCD_LE 0x0c
|
|
#define LPC_LCD_LE_LEE (1 << 16)
|
|
#define LPC_LCD_LE_LED ((_n) & 0x7f)
|
|
#define LPC_LCD_UPBASE 0x10
|
|
#define LPC_LCD_LPBASE 0x14
|
|
#define LPC_LCD_CTRL 0x18
|
|
#define LPC_LCD_CTRL_WATERMARK (1 << 16)
|
|
#define LPC_LCD_CTRL_LCDVCOMP(_n) (((_n) & 0x3) << 12)
|
|
#define LPC_LCD_CTRL_LCDPWR (1 << 11)
|
|
#define LPC_LCD_CTRL_BEPO (1 << 10)
|
|
#define LPC_LCD_CTRL_BEBO (1 << 9)
|
|
#define LPC_LCD_CTRL_BGR (1 << 8)
|
|
#define LPC_LCD_CTRL_LCDDUAL (1 << 7)
|
|
#define LPC_LCD_CTRL_LCDMONO8 (1 << 6)
|
|
#define LPC_LCD_CTRL_LCDTFT (1 << 5)
|
|
#define LPC_LCD_CTRL_LCDBW (1 << 4)
|
|
#define LPC_LCD_CTRL_LCDBPP(_n) (((_n) & 0x7) << 1)
|
|
#define LPC_LCD_CTRL_BPP1 0
|
|
#define LPC_LCD_CTRL_BPP2 1
|
|
#define LPC_LCD_CTRL_BPP4 2
|
|
#define LPC_LCD_CTRL_BPP8 3
|
|
#define LPC_LCD_CTRL_BPP16 4
|
|
#define LPC_LCD_CTRL_BPP24 5
|
|
#define LPC_LCD_CTRL_BPP16_565 6
|
|
#define LPC_LCD_CTRL_BPP12_444 7
|
|
#define LPC_LCD_CTRL_LCDEN (1 << 0)
|
|
#define LPC_LCD_INTMSK 0x1c
|
|
#define LPC_LCD_INTRAW 0x20
|
|
#define LPC_LCD_INTSTAT 0x24
|
|
#define LPC_LCD_INTCLR 0x28
|
|
#define LPC_LCD_UPCURR 0x2c
|
|
#define LPC_LCD_LPCURR 0x30
|
|
#define LPC_LCD_PAL 0x200
|
|
#define LPC_LCD_CRSR_IMG 0x800
|
|
#define LPC_LCD_CRSR_CTRL 0xc00
|
|
#define LPC_LCD_CRSR_CFG 0xc04
|
|
#define LPC_LCD_CRSR_PAL0 0xc08
|
|
#define LPC_LCD_CRSR_PAL1 0xc0c
|
|
#define LPC_LCD_CRSR_XY 0xc10
|
|
#define LPC_LCD_CRSR_CLIP 0xc14
|
|
#define LPC_LCD_CRSR_INTMSK 0xc20
|
|
#define LPC_LCD_CRSR_INTCLR 0xc24
|
|
#define LPC_LCD_CRSR_INTRAW 0xc28
|
|
#define LPC_LCD_CRSR_INTSTAT 0xc2c
|
|
|
|
/*
|
|
* SPI interface (from UM10326: LPC32x0 User manual, page 483)
|
|
*/
|
|
#define LPC_SPI_GLOBAL 0x00
|
|
#define LPC_SPI_GLOBAL_RST (1 << 1)
|
|
#define LPC_SPI_GLOBAL_ENABLE (1 << 0)
|
|
#define LPC_SPI_CON 0x04
|
|
#define LPC_SPI_CON_UNIDIR (1 << 23)
|
|
#define LPC_SPI_CON_BHALT (1 << 22)
|
|
#define LPC_SPI_CON_BPOL (1 << 21)
|
|
#define LPC_SPI_CON_MSB (1 << 19)
|
|
#define LPC_SPI_CON_MODE(_n) ((_n & 0x3) << 16)
|
|
#define LPC_SPI_CON_RXTX (1 << 15)
|
|
#define LPC_SPI_CON_THR (1 << 14)
|
|
#define LPC_SPI_CON_SHIFT_OFF (1 << 13)
|
|
#define LPC_SPI_CON_BITNUM(_n) ((_n & 0xf) << 9)
|
|
#define LPC_SPI_CON_MS (1 << 7)
|
|
#define LPC_SPI_CON_RATE(_n) (_n & 0x7f)
|
|
#define LPC_SPI_FRM 0x08
|
|
#define LPC_SPI_IER 0x0c
|
|
#define LPC_SPI_IER_INTEOT (1 << 1)
|
|
#define LPC_SPI_IER_INTTHR (1 << 0)
|
|
#define LPC_SPI_STAT 0x10
|
|
#define LPC_SPI_STAT_INTCLR (1 << 8)
|
|
#define LPC_SPI_STAT_EOT (1 << 7)
|
|
#define LPC_SPI_STAT_BUSYLEV (1 << 6)
|
|
#define LPC_SPI_STAT_SHIFTACT (1 << 3)
|
|
#define LPC_SPI_STAT_BF (1 << 2)
|
|
#define LPC_SPI_STAT_THR (1 << 1)
|
|
#define LPC_SPI_STAT_BE (1 << 0)
|
|
#define LPC_SPI_DAT 0x14
|
|
#define LPC_SPI_TIM_CTRL 0x400
|
|
#define LPC_SPI_TIM_COUNT 0x404
|
|
#define LPC_SPI_TIM_STAT 0x408
|
|
|
|
/*
|
|
* SSP interface (from UM10326: LPC32x0 User manual, page 500)
|
|
*/
|
|
#define LPC_SSP0_BASE 0x4c00
|
|
#define LPC_SSP1_BASE 0xc000
|
|
#define LPC_SSP_CR0 0x00
|
|
#define LPC_SSP_CR0_DSS(_n) ((_n-1) & 0xf)
|
|
#define LPC_SSP_CR0_TI (1 << 4)
|
|
#define LPC_SSP_CR0_MICROWIRE (1 << 5)
|
|
#define LPC_SSP_CR0_CPOL (1 << 6)
|
|
#define LPC_SSP_CR0_CPHA (1 << 7)
|
|
#define LPC_SSP_CR0_SCR(_n) ((_x & & 0xff) << 8)
|
|
#define LPC_SSP_CR1 0x04
|
|
#define LPC_SSP_CR1_LBM (1 << 0)
|
|
#define LPC_SSP_CR1_SSE (1 << 1)
|
|
#define LPC_SSP_CR1_MS (1 << 2)
|
|
#define LPC_SSP_CR1_SOD (1 << 3)
|
|
#define LPC_SSP_DR 0x08
|
|
#define LPC_SSP_SR 0x0c
|
|
#define LPC_SSP_SR_TFE (1 << 0)
|
|
#define LPC_SSP_SR_TNF (1 << 1)
|
|
#define LPC_SSP_SR_RNE (1 << 2)
|
|
#define LPC_SSP_SR_RFF (1 << 3)
|
|
#define LPC_SSP_SR_BSY (1 << 4)
|
|
#define LPC_SSP_CPSR 0x10
|
|
#define LPC_SSP_IMSC 0x14
|
|
#define LPC_SSP_IMSC_RORIM (1 << 0)
|
|
#define LPC_SSP_IMSC_RTIM (1 << 1)
|
|
#define LPC_SSP_IMSC_RXIM (1 << 2)
|
|
#define LPC_SSP_IMSC_TXIM (1 << 3)
|
|
#define LPC_SSP_RIS 0x18
|
|
#define LPC_SSP_RIS_RORRIS (1 << 0)
|
|
#define LPC_SSP_RIS_RTRIS (1 << 1)
|
|
#define LPC_SSP_RIS_RXRIS (1 << 2)
|
|
#define LPC_SSP_RIS_TXRIS (1 << 3)
|
|
#define LPC_SSP_MIS 0x1c
|
|
#define LPC_SSP_ICR 0x20
|
|
#define LPC_SSP_DMACR 0x24
|
|
|
|
/*
|
|
* GPIO (from UM10326: LPC32x0 User manual, page 606)
|
|
*/
|
|
#define LPC_GPIO_BASE (LPC_DEV_BASE + 0x28000)
|
|
#define LPC_GPIO_P0_COUNT 8
|
|
#define LPC_GPIO_P1_COUNT 24
|
|
#define LPC_GPIO_P2_COUNT 13
|
|
#define LPC_GPIO_P3_COUNT 52
|
|
#define LPC_GPIO_P0_INP_STATE 0x40
|
|
#define LPC_GPIO_P0_OUTP_SET 0x44
|
|
#define LPC_GPIO_P0_OUTP_CLR 0x48
|
|
#define LPC_GPIO_P0_OUTP_STATE 0x4c
|
|
#define LPC_GPIO_P0_DIR_SET 0x50
|
|
#define LPC_GPIO_P0_DIR_CLR 0x54
|
|
#define LPC_GPIO_P0_DIR_STATE 0x58
|
|
#define LPC_GPIO_P1_INP_STATE 0x60
|
|
#define LPC_GPIO_P1_OUTP_SET 0x64
|
|
#define LPC_GPIO_P1_OUTP_CLR 0x68
|
|
#define LPC_GPIO_P1_OUTP_STATE 0x6c
|
|
#define LPC_GPIO_P1_DIR_SET 0x70
|
|
#define LPC_GPIO_P1_DIR_CLR 0x74
|
|
#define LPC_GPIO_P1_DIR_STATE 0x78
|
|
#define LPC_GPIO_P2_INP_STATE 0x1c
|
|
#define LPC_GPIO_P2_OUTP_SET 0x20
|
|
#define LPC_GPIO_P2_OUTP_CLR 0x24
|
|
#define LPC_GPIO_P2_DIR_SET 0x10
|
|
#define LPC_GPIO_P2_DIR_CLR 0x14
|
|
#define LPC_GPIO_P2_DIR_STATE 0x14
|
|
#define LPC_GPIO_P3_INP_STATE 0x00
|
|
#define LPC_GPIO_P3_OUTP_SET 0x04
|
|
#define LPC_GPIO_P3_OUTP_CLR 0x08
|
|
#define LPC_GPIO_P3_OUTP_STATE 0x0c
|
|
/* Aliases for logical pin numbers: */
|
|
#define LPC_GPIO_GPI_00(_n) (0 + _n)
|
|
#define LPC_GPIO_GPI_15(_n) (10 + _n)
|
|
#define LPC_GPIO_GPI_25 (19)
|
|
#define LPC_GPIO_GPI_27(_n) (20 + _n)
|
|
#define LPC_GPIO_GPO_00(_n) (22 + _n)
|
|
#define LPC_GPIO_GPIO_00(_n) (46 + _n)
|
|
/* SPI devices chip selects: */
|
|
#define SSD1289_CS_PIN LPC_GPIO_GPO_00(4)
|
|
#define SSD1289_DC_PIN LPC_GPIO_GPO_00(5)
|
|
#define ADS7846_CS_PIN LPC_GPIO_GPO_00(11)
|
|
#define ADS7846_INTR_PIN LPC_GPIO_GPIO_00(0)
|
|
|
|
/*
|
|
* GPDMA controller (from UM10326: LPC32x0 User manual, page 106)
|
|
*/
|
|
#define LPC_DMAC_INTSTAT 0x00
|
|
#define LPC_DMAC_INTTCSTAT 0x04
|
|
#define LPC_DMAC_INTTCCLEAR 0x08
|
|
#define LPC_DMAC_INTERRSTAT 0x0c
|
|
#define LPC_DMAC_INTERRCLEAR 0x10
|
|
#define LPC_DMAC_RAWINTTCSTAT 0x14
|
|
#define LPC_DMAC_RAWINTERRSTAT 0x18
|
|
#define LPC_DMAC_ENABLED_CHANNELS 0x1c
|
|
#define LPC_DMAC_SOFTBREQ 0x20
|
|
#define LPC_DMAC_SOFTSREQ 0x24
|
|
#define LPC_DMAC_SOFTLBREQ 0x28
|
|
#define LPC_DMAC_SOFTLSREQ 0x2c
|
|
#define LPC_DMAC_CONFIG 0x30
|
|
#define LPC_DMAC_CONFIG_M1 (1 << 2)
|
|
#define LPC_DMAC_CONFIG_M0 (1 << 1)
|
|
#define LPC_DMAC_CONFIG_ENABLE (1 << 0)
|
|
#define LPC_DMAC_CHADDR(_n) (0x100 + (_n * 0x20))
|
|
#define LPC_DMAC_CHNUM 8
|
|
#define LPC_DMAC_CHSIZE 0x20
|
|
#define LPC_DMAC_CH_SRCADDR 0x00
|
|
#define LPC_DMAC_CH_DSTADDR 0x04
|
|
#define LPC_DMAC_CH_LLI 0x08
|
|
#define LPC_DMAC_CH_LLI_AHB1 (1 << 0)
|
|
#define LPC_DMAC_CH_CONTROL 0x0c
|
|
#define LPC_DMAC_CH_CONTROL_I (1U << 31)
|
|
#define LPC_DMAC_CH_CONTROL_DI (1 << 27)
|
|
#define LPC_DMAC_CH_CONTROL_SI (1 << 26)
|
|
#define LPC_DMAC_CH_CONTROL_D (1 << 25)
|
|
#define LPC_DMAC_CH_CONTROL_S (1 << 24)
|
|
#define LPC_DMAC_CH_CONTROL_WIDTH_4 2
|
|
#define LPC_DMAC_CH_CONTROL_DWIDTH(_n) ((_n & 0x7) << 21)
|
|
#define LPC_DMAC_CH_CONTROL_SWIDTH(_n) ((_n & 0x7) << 18)
|
|
#define LPC_DMAC_CH_CONTROL_BURST_8 2
|
|
#define LPC_DMAC_CH_CONTROL_DBSIZE(_n) ((_n & 0x7) << 15)
|
|
#define LPC_DMAC_CH_CONTROL_SBSIZE(_n) ((_n & 0x7) << 12)
|
|
#define LPC_DMAC_CH_CONTROL_XFERLEN(_n) (_n & 0xfff)
|
|
#define LPC_DMAC_CH_CONFIG 0x10
|
|
#define LPC_DMAC_CH_CONFIG_H (1 << 18)
|
|
#define LPC_DMAC_CH_CONFIG_A (1 << 17)
|
|
#define LPC_DMAC_CH_CONFIG_L (1 << 16)
|
|
#define LPC_DMAC_CH_CONFIG_ITC (1 << 15)
|
|
#define LPC_DMAC_CH_CONFIG_IE (1 << 14)
|
|
#define LPC_DMAC_CH_CONFIG_FLOWCNTL(_n) ((_n & 0x7) << 11)
|
|
#define LPC_DMAC_CH_CONFIG_DESTP(_n) ((_n & 0x1f) << 6)
|
|
#define LPC_DMAC_CH_CONFIG_SRCP(_n) ((_n & 0x1f) << 1)
|
|
#define LPC_DMAC_CH_CONFIG_E (1 << 0)
|
|
|
|
/* DMA flow control values */
|
|
#define LPC_DMAC_FLOW_D_M2M 0
|
|
#define LPC_DMAC_FLOW_D_M2P 1
|
|
#define LPC_DMAC_FLOW_D_P2M 2
|
|
#define LPC_DMAC_FLOW_D_P2P 3
|
|
#define LPC_DMAC_FLOW_DP_P2P 4
|
|
#define LPC_DMAC_FLOW_P_M2P 5
|
|
#define LPC_DMAC_FLOW_P_P2M 6
|
|
#define LPC_DMAC_FLOW_SP_P2P 7
|
|
|
|
/* DMA peripheral ID's */
|
|
#define LPC_DMAC_I2S0_DMA0_ID 0
|
|
#define LPC_DMAC_NAND_ID 1
|
|
#define LPC_DMAC_IS21_DMA0_ID 2
|
|
#define LPC_DMAC_SSP1_ID 3
|
|
#define LPC_DMAC_SPI2_ID 3
|
|
#define LPC_DMAC_SD_ID 4
|
|
#define LPC_DMAC_UART1_TX_ID 5
|
|
#define LPC_DMAC_UART1_RX_ID 6
|
|
#define LPC_DMAC_UART2_TX_ID 7
|
|
#define LPC_DMAC_UART2_RX_ID 8
|
|
#define LPC_DMAC_UART7_TX_ID 9
|
|
#define LPC_DMAC_UART7_RX_ID 10
|
|
#define LPC_DMAC_I2S1_DMA1_ID 10
|
|
#define LPC_DMAC_SPI1_ID 11
|
|
#define LPC_DMAC_SSP1_TX_ID 11
|
|
#define LPC_DMAC_NAND2_ID 12
|
|
#define LPC_DMAC_I2S0_DMA1_ID 13
|
|
#define LPC_DMAC_SSP0_RX 14
|
|
#define LPC_DMAC_SSP0_TX 15
|
|
|
|
#endif /* _ARM_LPC_LPCREG_H */
|