d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-nq/Makefile.in
Brian Behlendorf ab26409db7 Linux 3.1 compat, super_block->s_shrink 
The Linux 3.1 kernel has introduced the concept of per-filesystem
shrinkers which are directly assoicated with a super block.  Prior
to this change there was one shared global shrinker.

The zfs code relied on being able to call the global shrinker when
the arc_meta_limit was exceeded.  This would cause the VFS to drop
references on a fraction of the dentries in the dcache.  The ARC
could then safely reclaim the memory used by these entries and
honor the arc_meta_limit.  Unfortunately, when per-filesystem
shrinkers were added the old interfaces were made unavailable.

This change adds support to use the new per-filesystem shrinker
interface so we can continue to honor the arc_meta_limit.  The
major benefit of the new interface is that we can now target
only the zfs filesystem for dentry and inode pruning.  Thus we
can minimize any impact on the caching of other filesystems.

In the context of making this change several other important
issues related to managing the ARC were addressed, they include:

* The dnlc_reduce_cache() function which was called by the ARC
to drop dentries for the Posix layer was replaced with a generic
zfs_prune_t callback.  The ZPL layer now registers a callback to
drop these dentries removing a layering violation which dates
back to the Solaris code.  This callback can also be used by
other ARC consumers such as Lustre.

  arc_add_prune_callback()
  arc_remove_prune_callback()

* The arc_reduce_dnlc_percent module option has been changed to
arc_meta_prune for clarity.  The dnlc functions are specific to
Solaris's VFS and have already been largely eliminated already.
The replacement tunable now represents the number of bytes the
prune callback will request when invoked.

* Less aggressively invoke the prune callback.  We used to call
this whenever we exceeded the arc_meta_limit however that's not
strictly correct since it results in over zeleous reclaim of
dentries and inodes.  It is now only called once the arc_meta_limit
is exceeded and every effort has been made to evict other data from
the ARC cache.

* More promptly manage exceeding the arc_meta_limit.  When reading
meta data in to the cache if a buffer was unable to be recycled
notify the arc_reclaim thread to invoke the required prune.

* Added arcstat_prune kstat which is incremented when the ARC
is forced to request that a consumer prune its cache.  Remember
this will only occur when the ARC has no other choice.  If it
can evict buffers safely without invoking the prune callback
it will.

* This change is also expected to resolve the unexpect collapses
of the ARC cache.  This would occur because when exceeded just the
arc_meta_limit reclaim presure would be excerted on the arc_c
value via arc_shrink().  This effectively shrunk the entire cache
when really we just needed to reclaim meta data.

Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #466
Closes #292
2012-01-11 11:46:02 -08:00

1099 lines
36 KiB
Makefile
Raw Blame History

# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
###############################################################################
# Written by Prakash Surya <surya1@llnl.gov>
###############################################################################
# Build targets for RPM packages.
###############################################################################
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = $(am__configure_deps) $(noinst_HEADERS) \
$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(srcdir)/PKGBUILD-zfs-modules.in $(srcdir)/PKGBUILD-zfs.in \
$(srcdir)/zfs-modules.spec.in \
$(srcdir)/zfs-script-config.sh.in $(srcdir)/zfs.spec.in \
$(srcdir)/zfs_config.h.in $(top_srcdir)/config/arch.am \
$(top_srcdir)/config/deb.am $(top_srcdir)/config/rpm.am \
$(top_srcdir)/config/tgz.am $(top_srcdir)/configure \
$(top_srcdir)/module/Makefile.in \
$(top_srcdir)/module/avl/Makefile.in \
$(top_srcdir)/module/nvpair/Makefile.in \
$(top_srcdir)/module/unicode/Makefile.in \
$(top_srcdir)/module/zcommon/Makefile.in \
$(top_srcdir)/module/zfs/Makefile.in \
$(top_srcdir)/module/zpios/Makefile.in AUTHORS COPYING \
ChangeLog config/config.guess config/config.sub config/depcomp \
config/install-sh config/ltmain.sh config/missing
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = \
$(top_srcdir)/config/always-no-unused-but-set-variable.m4 \
$(top_srcdir)/config/kernel-bdev-block-device-operations.m4 \
$(top_srcdir)/config/kernel-bdev-logical-size.m4 \
$(top_srcdir)/config/kernel-bdi-setup-and-register.m4 \
$(top_srcdir)/config/kernel-bdi.m4 \
$(top_srcdir)/config/kernel-bio-empty-barrier.m4 \
$(top_srcdir)/config/kernel-bio-end-io-t-args.m4 \
$(top_srcdir)/config/kernel-bio-failfast.m4 \
$(top_srcdir)/config/kernel-bio-rw-syncio.m4 \
$(top_srcdir)/config/kernel-blk-end-request.m4 \
$(top_srcdir)/config/kernel-blk-fetch-request.m4 \
$(top_srcdir)/config/kernel-blk-requeue-request.m4 \
$(top_srcdir)/config/kernel-blk-rq-bytes.m4 \
$(top_srcdir)/config/kernel-blk-rq-pos.m4 \
$(top_srcdir)/config/kernel-blk-rq-sectors.m4 \
$(top_srcdir)/config/kernel-blkdev-get-by-path.m4 \
$(top_srcdir)/config/kernel-check-disk-size-change.m4 \
$(top_srcdir)/config/kernel-d-obtain-alias.m4 \
$(top_srcdir)/config/kernel-evict-inode.m4 \
$(top_srcdir)/config/kernel-fmode-t.m4 \
$(top_srcdir)/config/kernel-fsync.m4 \
$(top_srcdir)/config/kernel-get-disk-ro.m4 \
$(top_srcdir)/config/kernel-insert-inode-locked.m4 \
$(top_srcdir)/config/kernel-invalidate-bdev-args.m4 \
$(top_srcdir)/config/kernel-kobj-name-len.m4 \
$(top_srcdir)/config/kernel-mount-nodev.m4 \
$(top_srcdir)/config/kernel-open-bdev-exclusive.m4 \
$(top_srcdir)/config/kernel-rq-for-each_segment.m4 \
$(top_srcdir)/config/kernel-rq-is_sync.m4 \
$(top_srcdir)/config/kernel-security-inode-init.m4 \
$(top_srcdir)/config/kernel-set-nlink.m4 \
$(top_srcdir)/config/kernel-shrink.m4 \
$(top_srcdir)/config/kernel-truncate-setsize.m4 \
$(top_srcdir)/config/kernel-xattr-handler.m4 \
$(top_srcdir)/config/kernel.m4 \
$(top_srcdir)/config/user-arch.m4 \
$(top_srcdir)/config/user-frame-larger-than.m4 \
$(top_srcdir)/config/user-ioctl.m4 \
$(top_srcdir)/config/user-libblkid.m4 \
$(top_srcdir)/config/user-libuuid.m4 \
$(top_srcdir)/config/user-nptl_guard_within_stack.m4 \
$(top_srcdir)/config/user-selinux.m4 \
$(top_srcdir)/config/user-udev.m4 \
$(top_srcdir)/config/user-zlib.m4 $(top_srcdir)/config/user.m4 \
$(top_srcdir)/config/zfs-build.m4 \
$(top_srcdir)/config/zfs-meta.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = zfs_config.h
CONFIG_CLEAN_FILES = module/Makefile module/avl/Makefile \
module/nvpair/Makefile module/unicode/Makefile \
module/zcommon/Makefile module/zfs/Makefile \
module/zpios/Makefile zfs.spec zfs-modules.spec PKGBUILD-zfs \
PKGBUILD-zfs-modules zfs-script-config.sh
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo " GEN " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
HEADERS = $(noinst_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir dist dist-all distcheck
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = dracut udev etc man scripts lib cmd module include
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
{ test ! -d "$(distdir)" \
|| { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
&& rm -fr "$(distdir)"; }; }
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ALIEN = @ALIEN@
ALIEN_VERSION = @ALIEN_VERSION@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCAS = @CCAS@
CCASDEPMODE = @CCASDEPMODE@
CCASFLAGS = @CCASFLAGS@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DEBUG_CFLAGS = @DEBUG_CFLAGS@
DEBUG_STACKFLAGS = @DEBUG_STACKFLAGS@
DEFAULT_INIT_DIR = @DEFAULT_INIT_DIR@
DEFAULT_INIT_SCRIPT = @DEFAULT_INIT_SCRIPT@
DEFAULT_PACKAGE = @DEFAULT_PACKAGE@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DPKG = @DPKG@
DPKGBUILD = @DPKGBUILD@
DPKGBUILD_VERSION = @DPKGBUILD_VERSION@
DPKG_VERSION = @DPKG_VERSION@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FRAME_LARGER_THAN = @FRAME_LARGER_THAN@
GREP = @GREP@
HAVE_ALIEN = @HAVE_ALIEN@
HAVE_DPKG = @HAVE_DPKG@
HAVE_DPKGBUILD = @HAVE_DPKGBUILD@
HAVE_MAKEPKG = @HAVE_MAKEPKG@
HAVE_PACMAN = @HAVE_PACMAN@
HAVE_RPM = @HAVE_RPM@
HAVE_RPMBUILD = @HAVE_RPMBUILD@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
KERNELCPPFLAGS = @KERNELCPPFLAGS@
KERNELMAKE_PARAMS = @KERNELMAKE_PARAMS@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBBLKID = @LIBBLKID@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSELINUX = @LIBSELINUX@
LIBTOOL = @LIBTOOL@
LIBUUID = @LIBUUID@
LINUX = @LINUX@
LINUX_OBJ = @LINUX_OBJ@
LINUX_SYMBOLS = @LINUX_SYMBOLS@
LINUX_VERSION = @LINUX_VERSION@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MAKEPKG = @MAKEPKG@
MAKEPKG_VERSION = @MAKEPKG_VERSION@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
NO_UNUSED_BUT_SET_VARIABLE = @NO_UNUSED_BUT_SET_VARIABLE@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PACMAN = @PACMAN@
PACMAN_VERSION = @PACMAN_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
RANLIB = @RANLIB@
RPM = @RPM@
RPMBUILD = @RPMBUILD@
RPMBUILD_VERSION = @RPMBUILD_VERSION@
RPM_VERSION = @RPM_VERSION@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SPL = @SPL@
SPL_OBJ = @SPL_OBJ@
SPL_SYMBOLS = @SPL_SYMBOLS@
SPL_VERSION = @SPL_VERSION@
STRIP = @STRIP@
TARGET_ASM_DIR = @TARGET_ASM_DIR@
VENDOR = @VENDOR@
VERSION = @VERSION@
ZFS_CONFIG = @ZFS_CONFIG@
ZFS_META_ALIAS = @ZFS_META_ALIAS@
ZFS_META_AUTHOR = @ZFS_META_AUTHOR@
ZFS_META_DATA = @ZFS_META_DATA@
ZFS_META_LICENSE = @ZFS_META_LICENSE@
ZFS_META_LT_AGE = @ZFS_META_LT_AGE@
ZFS_META_LT_CURRENT = @ZFS_META_LT_CURRENT@
ZFS_META_LT_REVISION = @ZFS_META_LT_REVISION@
ZFS_META_NAME = @ZFS_META_NAME@
ZFS_META_RELEASE = @ZFS_META_RELEASE@
ZFS_META_VERSION = @ZFS_META_VERSION@
ZLIB = @ZLIB@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
lt_ECHO = @lt_ECHO@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
udevdir = @udevdir@
udevruledir = @udevruledir@
@CONFIG_USER_TRUE@USER_DIR = dracut udev etc man scripts lib cmd
@CONFIG_KERNEL_TRUE@KERNEL_DIR = module
SUBDIRS = $(USER_DIR) $(KERNEL_DIR) include
AUTOMAKE_OPTIONS = foreign
EXTRA_DIST = autogen.sh zfs.spec.in zfs-modules.spec.in \
config/config.awk config/rpm.am config/deb.am config/tgz.am \
META DISCLAIMER COPYRIGHT README.markdown OPENSOLARIS.LICENSE \
ZFS.RELEASE
noinst_HEADERS = zfs_config.h
all: zfs_config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
am--refresh:
@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/config/rpm.am $(top_srcdir)/config/deb.am $(top_srcdir)/config/tgz.am $(top_srcdir)/config/arch.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
$(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
echo ' $(SHELL) ./config.status'; \
$(SHELL) ./config.status;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):
zfs_config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/zfs_config.h.in $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status zfs_config.h
$(srcdir)/zfs_config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
($(am__cd) $(top_srcdir) && $(AUTOHEADER))
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f zfs_config.h stamp-h1
module/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/avl/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/avl/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/nvpair/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/nvpair/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/unicode/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/unicode/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/zcommon/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zcommon/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/zfs/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zfs/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
module/zpios/Makefile: $(top_builddir)/config.status $(top_srcdir)/module/zpios/Makefile.in
cd $(top_builddir) && $(SHELL) ./config.status $@
zfs.spec: $(top_builddir)/config.status $(srcdir)/zfs.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
zfs-modules.spec: $(top_builddir)/config.status $(srcdir)/zfs-modules.spec.in
cd $(top_builddir) && $(SHELL) ./config.status $@
PKGBUILD-zfs: $(top_builddir)/config.status $(srcdir)/PKGBUILD-zfs.in
cd $(top_builddir) && $(SHELL) ./config.status $@
PKGBUILD-zfs-modules: $(top_builddir)/config.status $(srcdir)/PKGBUILD-zfs-modules.in
cd $(top_builddir) && $(SHELL) ./config.status $@
zfs-script-config.sh: $(top_builddir)/config.status $(srcdir)/zfs-script-config.sh.in
cd $(top_builddir) && $(SHELL) ./config.status $@
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
distclean-libtool:
-rm -f libtool config.lt
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
TAGS: tags-recursive $(HEADERS) $(SOURCES) zfs_config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) zfs_config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) zfs_config.h.in $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) zfs_config.h.in $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
$(am__remove_distdir)
test -d "$(distdir)" || mkdir "$(distdir)"
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
-test -n "$(am__skip_mode_fix)" \
|| find "$(distdir)" -type d ! -perm -755 \
-exec chmod u+rwx,go+rx {} \; -o \
! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
! -type d ! -perm -400 -exec chmod a+r {} \; -o \
! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
|| chmod -R a+r "$(distdir)"
dist-gzip: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
dist-bzip2: distdir
tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
$(am__remove_distdir)
dist-lzma: distdir
tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
$(am__remove_distdir)
dist-xz: distdir
tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
$(am__remove_distdir)
dist-tarZ: distdir
tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
$(am__remove_distdir)
dist-shar: distdir
shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
$(am__remove_distdir)
dist-zip: distdir
-rm -f $(distdir).zip
zip -rq $(distdir).zip $(distdir)
$(am__remove_distdir)
dist dist-all: distdir
tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
$(am__remove_distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
case '$(DIST_ARCHIVES)' in \
*.tar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
*.tar.bz2*) \
bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
*.tar.lzma*) \
lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
*.tar.xz*) \
xz -dc $(distdir).tar.xz | $(am__untar) ;;\
*.tar.Z*) \
uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
*.shar.gz*) \
GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
*.zip*) \
unzip $(distdir).zip ;;\
esac
chmod -R a-w $(distdir); chmod a+w $(distdir)
mkdir $(distdir)/_build
mkdir $(distdir)/_inst
chmod a-w $(distdir)
test -d $(distdir)/_build || exit 0; \
dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
&& dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
&& am__cwd=`pwd` \
&& $(am__cd) $(distdir)/_build \
&& ../configure --srcdir=.. --prefix="$$dc_install_base" \
$(DISTCHECK_CONFIGURE_FLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
distuninstallcheck \
&& chmod -R a-w "$$dc_install_base" \
&& ({ \
(cd ../.. && umask 077 && mkdir "$$dc_destdir") \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
&& $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
} || { rm -rf "$$dc_destdir"; exit 1; }) \
&& rm -rf "$$dc_destdir" \
&& $(MAKE) $(AM_MAKEFLAGS) dist \
&& rm -rf $(DIST_ARCHIVES) \
&& $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
&& cd "$$am__cwd" \
|| exit 1
$(am__remove_distdir)
@(echo "$(distdir) archives ready for distribution: "; \
list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
@$(am__cd) '$(distuninstallcheck_dir)' \
&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
|| { echo "ERROR: files left after uninstall:" ; \
if test -n "$(DESTDIR)"; then \
echo " (check DESTDIR support)"; \
fi ; \
$(distuninstallcheck_listfiles) ; \
exit 1; } >&2
distcleancheck: distclean
@if test '$(srcdir)' = . ; then \
echo "ERROR: distcleancheck can only run from a VPATH build" ; \
exit 1 ; \
fi
@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
|| { echo "ERROR: files left in build directory after distclean:" ; \
$(distcleancheck_listfiles) ; \
exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(HEADERS) zfs_config.h
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
@CONFIG_KERNEL_FALSE@install-data-local:
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-hdr \
distclean-libtool distclean-local distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am: install-data-local
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-rm -rf $(top_srcdir)/autom4te.cache
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
ctags-recursive install-am install-strip tags-recursive
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am am--refresh check check-am clean clean-generic \
clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
dist-gzip dist-lzma dist-shar dist-tarZ dist-xz dist-zip \
distcheck distclean distclean-generic distclean-hdr \
distclean-libtool distclean-local distclean-tags \
distcleancheck distdir distuninstallcheck dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-data-local install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
install-info install-info-am install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
tags tags-recursive uninstall uninstall-am
srpm-modules:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" srpm-common
srpm-utils:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" srpm-common
srpm: srpm-modules srpm-utils
rpm-modules: srpm-modules
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" rpm-common
rpm-utils: srpm-utils
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" rpm-common
rpm-modules: srpm-modules
rpm: rpm-modules rpm-utils
rpm-local:
@(if test "${HAVE_RPMBUILD}" = "no"; then \
echo -e "\n" \
"*** Required util ${RPMBUILD} missing. Please install the\n" \
"*** package for your distribution which provides ${RPMBUILD},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi; \
mkdir -p $(rpmbuild)/TMP && \
mkdir -p $(rpmbuild)/BUILD && \
mkdir -p $(rpmbuild)/RPMS && \
mkdir -p $(rpmbuild)/SRPMS && \
mkdir -p $(rpmbuild)/SPECS && \
cp $(rpmspec) $(rpmbuild)/SPECS && \
mkdir -p $(rpmbuild)/SOURCES && \
cp $(distdir).tar.gz $(rpmbuild)/SOURCES)
srpm-common: dist
rpmpkg=$(pkg)-$(ZFS_META_VERSION)-$(ZFS_META_RELEASE).src.rpm; \
rpmspec=$(pkg).spec; \
rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
$(MAKE) $(AM_MAKEFLAGS) \
rpmbuild="$$rpmbuild" \
rpmspec="$$rpmspec" \
rpm-local || exit 1; \
$(RPMBUILD) \
--define "_tmppath $$rpmbuild/TMP" \
--define "_topdir $$rpmbuild" \
--define "build_src_rpm 1" \
--define "dist %{nil}" \
--nodeps -bs $$rpmbuild/SPECS/$$rpmspec || exit 1; \
cp $$rpmbuild/SRPMS/$$rpmpkg . || exit 1; \
$(RM) -R $$rpmbuild
rpm-common:
rpmpkg=$(pkg)-$(ZFS_META_VERSION)-$(ZFS_META_RELEASE).src.rpm; \
rpmspec=$(pkg).spec; \
rpmbuild=`mktemp -t -d $(PACKAGE)-build-$$USER-XXXXXXXX`; \
$(MAKE) $(AM_MAKEFLAGS) \
rpmbuild="$$rpmbuild" \
rpmspec="$$rpmspec" \
rpm-local || exit 1; \
$(RPMBUILD) \
--define "_tmppath $$rpmbuild/TMP" \
--define "_topdir $$rpmbuild" \
--define "dist %{nil}" \
--define "require_kdir $(LINUX)" \
--define "require_kobj $(LINUX_OBJ)" \
--define "require_kver $(LINUX_VERSION)" \
--define "require_spldir $(SPL)" \
--define "require_splobj $(SPL_OBJ)" \
--define "require_splver $(SPL_VERSION)" \
--nodeps --rebuild $$rpmpkg || exit 1; \
cp $$rpmbuild/RPMS/*/* . || exit 1; \
$(RM) -R $$rpmbuild
deb-local:
@(if test "${HAVE_DPKGBUILD}" = "no"; then \
echo -e "\n" \
"*** Required util ${DPKGBUILD} missing. Please install the\n" \
"*** package for your distribution which provides ${DPKGBUILD},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi; \
if test "${HAVE_ALIEN}" = "no"; then \
echo -e "\n" \
"*** Required util ${ALIEN} missing. Please install the\n" \
"*** package for your distribution which provides ${ALIEN},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi)
deb-modules: deb-local rpm-modules
name=${PACKAGE}-modules; \
version=${ZFS_META_VERSION}-${ZFS_META_RELEASE}; \
release=`echo ${LINUX_VERSION} | $(SED) -e "s/-/_/g"`; \
arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
pkg1=$${name}-$${version}_$${release}.$${arch}.rpm; \
pkg2=$${name}-devel-$${version}_$${release}.$${arch}.rpm; \
fakeroot $(ALIEN) --scripts --to-deb $$pkg1 $$pkg2; \
$(RM) $$pkg1 $$pkg2
deb-utils: deb-local rpm-utils
name=${PACKAGE}; \
version=${ZFS_META_VERSION}-${ZFS_META_RELEASE}; \
arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
pkg1=$${name}-$${version}.$${arch}.rpm; \
pkg2=$${name}-devel-$${version}.$${arch}.rpm; \
pkg3=$${name}-test-$${version}.$${arch}.rpm; \
pkg4=$${name}-dracut-$${version}.$${arch}.rpm; \
fakeroot $(ALIEN) --scripts --to-deb $$pkg1 $$pkg2 $$pkg3 $$pkg4; \
$(RM) $$pkg1 $$pkg2 $$pkg3 $$pkg4
deb: deb-modules deb-utils
tgz-local:
@(if test "${HAVE_ALIEN}" = "no"; then \
echo -e "\n" \
"*** Required util ${ALIEN} missing. Please install the\n" \
"*** package for your distribution which provides ${ALIEN},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi)
tgz-modules: tgz-local rpm-modules
name=${PACKAGE}-modules; \
version=${ZFS_META_VERSION}-${ZFS_META_RELEASE}; \
release=`echo ${LINUX_VERSION} | $(SED) -e "s/-/_/g"`; \
arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
pkg1=$${name}-$${version}_$${release}.$${arch}.rpm; \
pkg2=$${name}-devel-$${version}_$${release}.$${arch}.rpm; \
fakeroot $(ALIEN) --scripts --to-tgz $$pkg1 $$pkg2; \
$(RM) $$pkg1 $$pkg2
tgz-utils: tgz-local rpm-utils
name=${PACKAGE}; \
version=${ZFS_META_VERSION}-${ZFS_META_RELEASE}; \
arch=`$(RPM) -qp $${name}-$${version}.src.rpm --qf %{arch} | tail -1`; \
pkg1=$${name}-$${version}.$${arch}.rpm; \
pkg2=$${name}-devel-$${version}.$${arch}.rpm; \
pkg3=$${name}-test-$${version}.$${arch}.rpm; \
fakeroot $(ALIEN) --scripts --to-tgz $$pkg1 $$pkg2 $$pkg3; \
$(RM) $$pkg1 $$pkg2 $$pkg3
tgz: tgz-modules tgz-utils
sarch-modules:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" sarch-common
sarch-utils:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" sarch-common
sarch: sarch-modules sarch-utils
arch-modules:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}-modules" arch-common
arch-utils:
$(MAKE) $(AM_MAKEFLAGS) pkg="${PACKAGE}" arch-common
arch: arch-modules arch-utils
arch-local:
@(if test "${HAVE_MAKEPKG}" = "no"; then \
echo -e "\n" \
"*** Required util ${MAKEPKG} missing. Please install the\n" \
"*** package for your distribution which provides ${MAKEPKG},\n" \
"*** re-run configure, and try again.\n"; \
exit 1; \
fi;)
sarch-common: dist
pkgbuild=PKGBUILD-$(pkg); \
$(MAKE) $(AM_MAKEFLAGS) arch-local || exit 1; \
$(MAKEPKG) --allsource --skipinteg --nodeps -p $$pkgbuild || exit 1;
arch-common: dist
pkgbuild=PKGBUILD-$(pkg); \
$(MAKE) $(AM_MAKEFLAGS) arch-local || exit 1; \
$(MAKEPKG) --skipinteg -p $$pkgbuild || exit 1;
distclean-local::
-$(RM) -R autom4te*.cache
-find . \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
-o -name .pc -o -name .hg -o -name .git \) -prune -o \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-o -name '.*.rej' -o -name '.script-config' -o -size 0 \
-o -name '*%' -o -name '.*.cmd' -o -name 'core' \
-o -name 'Makefile' -o -name 'Module.symvers' \
-o -name '*.order' -o -name '*.markers' \) \
-type f -print | xargs $(RM)
@CONFIG_KERNEL_TRUE@install-data-local:
@CONFIG_KERNEL_TRUE@ destname=zfs-$(ZFS_META_VERSION)/$(LINUX_VERSION); \
@CONFIG_KERNEL_TRUE@ instdest=$(DESTDIR)/usr/src/$$destname; \
@CONFIG_KERNEL_TRUE@ echo "$(ZFS_META_VERSION)" >$$instdest/zfs.release; \
@CONFIG_KERNEL_TRUE@ for instfile in $(noinst_HEADERS) module/$(LINUX_SYMBOLS); do \
@CONFIG_KERNEL_TRUE@ $(INSTALL) -D $$instfile $$instdest/$$instfile; \
@CONFIG_KERNEL_TRUE@ done
ctags:
$(RM) $(top_srcdir)/tags
find $(top_srcdir) -name .git -prune -o -name '*.[hc]' | xargs ctags
etags:
$(RM) $(top_srcdir)/TAGS
find $(top_srcdir) -name .pc -prune -o -name '*.[hc]' | xargs etags -a
tags: ctags etags
pkg: @DEFAULT_PACKAGE@
pkg-modules: @DEFAULT_PACKAGE@-modules
pkg-utils: @DEFAULT_PACKAGE@-utils
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Reference in New Issue View Git Blame Copy Permalink