3aa12267a5
(except in netccitt, netiso and netns) that I didn't notice when I fixed "all" such warnings before.
2275 lines
55 KiB
C
2275 lines
55 KiB
C
#define ZP_DEBUG 1
|
||
/*
|
||
* This code is based on
|
||
* (1) FreeBSD implementation on ISA/EISA Ethelink III by Herb Peyerl
|
||
* (2) Linux implementation on PCMCIA Etherlink III by Devid Hinds
|
||
* (3) FreeBSD implementation on PCMCIA IBM Ethernet Card I/II
|
||
* by David Greenman
|
||
* (4) RT-Mach implementation on PCMCIA/ISA/EISA Etherlink III
|
||
* by Seiji Murata
|
||
*
|
||
* Copyright (c) by HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
|
||
* Copyright (c) by Seiji Murata <seiji@mt.cs.keio.ac.jp>
|
||
*/
|
||
/*
|
||
* Copyright (c) 1993 Herb Peyerl <hpeyerl@novatel.ca>
|
||
* All rights reserved.
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. The name of the author may not be used to endorse or promote products
|
||
* derived from this software without specific prior written permission
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
*
|
||
* From: if_ep.c,v 1.9 1994/01/25 10:46:29 deraadt Exp $
|
||
* $Id: if_zp.c,v 1.2 1995/02/26 05:14:49 bde Exp $
|
||
*/
|
||
/*-
|
||
* TODO:
|
||
* [1] integrate into current if_ed.c
|
||
* [2] parse tuples to find out where to map the shared memory buffer,
|
||
* and what to write into the configuration register
|
||
* [3] move pcic-specific code into a separate module.
|
||
*
|
||
* Device driver for IBM PCMCIA Credit Card Adapter for Ethernet,
|
||
* if_ze.c
|
||
*
|
||
* Based on the Device driver for National Semiconductor DS8390 ethernet
|
||
* adapters by David Greenman. Modifications for PCMCIA by Keith Moore.
|
||
* Adapted for FreeBSD 1.1.5 by Jordan Hubbard.
|
||
*
|
||
* Currently supports only the IBM Credit Card Adapter for Ethernet, but
|
||
* could probably work with other PCMCIA cards also, if it were modified
|
||
* to get the locations of the PCMCIA configuration option register (COR)
|
||
* by parsing the configuration tuples, rather than by hard-coding in
|
||
* the value expected by IBM's card.
|
||
*
|
||
* Sources for data on the PCMCIA/IBM CCAE specific portions of the driver:
|
||
*
|
||
* [1] _Local Area Network Credit Card Adapters Technical Reference_,
|
||
* IBM Corp., SC30-3585-00, part # 33G9243.
|
||
* [2] "pre-alpha" PCMCIA support code for Linux by Barry Jaspan.
|
||
* [3] Intel 82536SL PC Card Interface Controller Data Sheet, Intel
|
||
* Order Number 290423-002
|
||
* [4] National Semiconductor DP83902A ST-NIC (tm) Serial Network
|
||
* Interface Controller for Twisted Pair data sheet.
|
||
*
|
||
*
|
||
* Copyright (C) 1993, David Greenman. This software may be used, modified,
|
||
* copied, distributed, and sold, in both source and binary form provided
|
||
* that the above copyright and these terms are retained. Under no
|
||
* circumstances is the author responsible for the proper functioning
|
||
* of this software, nor does the author assume any responsibility
|
||
* for damages incurred with its use.
|
||
*/
|
||
/*======================================================================
|
||
|
||
A PCMCIA ethernet driver for the 3com 3c589 card.
|
||
|
||
Written by David Hinds, dhinds@allegro.stanford.edu
|
||
|
||
The network driver code is based on Donald Becker's 3c589 code:
|
||
|
||
Written 1994 by Donald Becker.
|
||
Copyright 1993 United States Government as represented by the
|
||
Director, National Security Agency. This software may be used and
|
||
distributed according to the terms of the GNU Public License,
|
||
incorporated herein by reference.
|
||
Donald Becker may be reached at becker@cesdis1.gsfc.nasa.gov
|
||
|
||
======================================================================*/
|
||
/*
|
||
* I doubled delay loops in this file because it is not enough for some
|
||
* laptop machines' PCIC (especially, on my Chaplet ILFA 350 ^^;).
|
||
* HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
|
||
*/
|
||
/*
|
||
* Very small patch for IBM Ethernet PCMCIA Card II and IBM ThinkPad230Cs.
|
||
* ETO, Toshihisa <eto@osl.fujitsu.co.jp>
|
||
*/
|
||
|
||
#include "zp.h"
|
||
#if NZP > 0
|
||
#ifdef MACH_KERNEL
|
||
|
||
#define IF_CNTRS MACH
|
||
|
||
#include <mach_ttd.h>
|
||
#include <kern/time_out.h>
|
||
#include <device/device_types.h>
|
||
#include <device/errno.h>
|
||
#include <device/io_req.h>
|
||
#include <device/if_hdr.h>
|
||
#include <device/if_ether.h>
|
||
#include <device/net_status.h>
|
||
#include <device/net_io.h>
|
||
|
||
#include <i386/ipl.h>
|
||
#include <chips/busses.h>
|
||
|
||
#include <i386at/if_zpreg.h>
|
||
|
||
#define SPLNET spl6
|
||
|
||
#if MACH_TTD
|
||
#include <ttd/ttd_stub.h>
|
||
#endif /* MACH_TTD */
|
||
|
||
#include "i82365.h"
|
||
|
||
#define MAXSLOT 8
|
||
#define SHARED_MEMORY
|
||
|
||
enum memtype { COMMON, ATTRIBUTE };
|
||
|
||
#else /* MACH_KERNEL */
|
||
|
||
#include "bpfilter.h"
|
||
|
||
#include <sys/param.h>
|
||
#if defined(__FreeBSD__)
|
||
#include <sys/systm.h>
|
||
#include <sys/kernel.h>
|
||
#endif
|
||
#include <sys/mbuf.h>
|
||
#include <sys/socket.h>
|
||
#include <sys/ioctl.h>
|
||
#include <sys/errno.h>
|
||
#include <sys/syslog.h>
|
||
#if defined(__NetBSD__)
|
||
#include <sys/select.h>
|
||
#endif
|
||
|
||
#include <net/if.h>
|
||
#include <net/if_dl.h>
|
||
#include <net/if_types.h>
|
||
|
||
#ifdef INET
|
||
#include <netinet/in.h>
|
||
#include <netinet/in_systm.h>
|
||
#include <netinet/in_var.h>
|
||
#include <netinet/ip.h>
|
||
#include <netinet/if_ether.h>
|
||
#endif
|
||
|
||
#ifdef NS
|
||
#include <netns/ns.h>
|
||
#include <netns/ns_if.h>
|
||
#endif
|
||
|
||
#if NBPFILTER > 0
|
||
#include <net/bpf.h>
|
||
#include <net/bpfdesc.h>
|
||
#endif
|
||
|
||
#if defined(__FreeBSD__)
|
||
#include <machine/clock.h>
|
||
#endif
|
||
|
||
#if defined(__FreeBSD__) && defined(ZP_DEBUG)
|
||
#include <i386/i386/cons.h>
|
||
#endif
|
||
|
||
#include <i386/isa/isa.h>
|
||
#include <i386/isa/isa_device.h>
|
||
#include <i386/isa/icu.h>
|
||
#include <i386/isa/if_zpreg.h>
|
||
#include <i386/isa/pcic.h>
|
||
|
||
#include "apm.h"
|
||
#if NAPM > 0
|
||
#include <machine/apm_bios.h>
|
||
#endif /* NAPM > 0 */
|
||
|
||
#endif /* MACH_KERNEL */
|
||
|
||
#define ETHER_MIN_LEN 64
|
||
#define ETHER_MAX_LEN 1518
|
||
#define ETHER_ADDR_LEN 6
|
||
|
||
|
||
/*****************************************************************************
|
||
* Driver for Ethernet Adapter *
|
||
*****************************************************************************/
|
||
/*
|
||
* zp_softc: per line info and status
|
||
*/
|
||
struct zp_softc {
|
||
#ifdef MACH_KERNEL
|
||
struct ifnet ds_if; /* generic interface header */
|
||
u_char ds_addr[6]; /* Ethernet hardware address */
|
||
#else /* MACH_KERNEL */
|
||
struct arpcom arpcom; /* Ethernet common part */
|
||
#define MAX_MBS 8 /* # of mbufs we keep around */
|
||
struct mbuf *mb[MAX_MBS]; /* spare mbuf storage. */
|
||
int next_mb; /* Which mbuf to use next. */
|
||
int last_mb; /* Last mbuf. */
|
||
caddr_t bpf; /* BPF "magic cookie" */
|
||
#endif /* MACH_KERNEL */
|
||
short ep_io_addr; /* i/o bus address */
|
||
char ep_connectors; /* Connectors on this card. */
|
||
int tx_start_thresh; /* Current TX_start_thresh. */
|
||
char bus32bit; /* 32bit access possible */
|
||
#ifdef MACH_KERNEL
|
||
u_char attached;
|
||
#endif
|
||
#ifndef ORIGINAL
|
||
u_short if_port;
|
||
#endif /* ORIGINAL */
|
||
u_char last_alive; /* information for reconfiguration */
|
||
u_char last_up; /* information for reconfiguration */
|
||
int slot; /* PCMCIA slot */
|
||
#if NAPM > 0
|
||
struct apmhook s_hook; /* reconfiguration support */
|
||
struct apmhook r_hook; /* reconfiguration support */
|
||
#endif /* NAPM > 0 */
|
||
} zp_softc[NZP];
|
||
|
||
#ifdef MACH_KERNEL
|
||
|
||
static int send_ID_sequence(),f_is_eeprom_busy();
|
||
static u_short get_eeprom_data();
|
||
int zpprobe(),zpopen(),zpoutput(),zpsetinput(),zpgetstat(),
|
||
zpsetstat(),zpintr();
|
||
void zpattach(),zpinit(),zpstart(),zpread(),zpreset(),
|
||
zpwatchdog(),zpstop();
|
||
|
||
static vm_offset_t zp_std[NZP] = {0};
|
||
static struct bus_device *zp_info[NZP];
|
||
|
||
struct bus_driver zpdriver =
|
||
{zpprobe, 0, zpattach, 0, zp_std, "zp", zp_info, 0, 0, 0};
|
||
|
||
typedef struct zp_softc zp_softc_t;
|
||
|
||
char *zp_name = "zp";
|
||
|
||
static unsigned char card_info[256];
|
||
|
||
#define splnet spl7
|
||
#define splimp spl7
|
||
|
||
#else /* MACH_KERNEL */
|
||
|
||
int zpprobe __P((struct isa_device *));
|
||
int zpattach __P((struct isa_device *));
|
||
static int zpioctl __P((struct ifnet * ifp, int, caddr_t));
|
||
static u_short read_eeprom_data __P((int, int));
|
||
|
||
void zpinit __P((int));
|
||
void zpintr __P((int));
|
||
void zpmbuffill __P((void *));
|
||
static void zpmbufempty __P((struct zp_softc *));
|
||
void zpread __P((struct zp_softc *));
|
||
void zpreset __P((int));
|
||
void zpstart __P((struct ifnet *));
|
||
void zpstop __P((int));
|
||
void zpwatchdog __P((int));
|
||
|
||
struct isa_driver zpdriver = {
|
||
zpprobe,
|
||
zpattach,
|
||
"zp"
|
||
};
|
||
|
||
static int send_ID_sequence __P((u_short));
|
||
static u_short get_eeprom_data __P((int, int));
|
||
static int f_is_eeprom_busy __P((struct isa_device *));
|
||
|
||
#endif /* MACH_KERNEL */
|
||
|
||
#define CARD_INFO "3Com Corporation~3C589"
|
||
|
||
static unsigned char card_info[256];
|
||
|
||
/*
|
||
* scan the card information structure looking for the version/product info
|
||
* tuple. when we find it, compare it to the string we are looking for.
|
||
* return 1 if we find it, 0 otherwise.
|
||
*/
|
||
|
||
static int
|
||
zp_check_cis (unsigned char *scratch)
|
||
{
|
||
int i,j,k;
|
||
|
||
card_info[0] = '\0';
|
||
i = 0;
|
||
while (scratch[i] != 0xff && i < 1024) {
|
||
unsigned char link = scratch[i+2];
|
||
|
||
#if 0
|
||
printf ("[%02x] %02x ", i, link);
|
||
for (j = 4; j < 2 * link + 4 && j < 32; j += 2)
|
||
printf ("%02x ", scratch[j + i]);
|
||
printf ("\n");
|
||
#endif
|
||
if (scratch[i] == 0x15) {
|
||
/*
|
||
* level 1 version/product info
|
||
* copy to card_info, translating '\0' to '~'
|
||
*/
|
||
k = 0;
|
||
for (j = i+8; scratch[j] != 0xff; j += 2)
|
||
card_info[k++] = scratch[j] == '\0' ? '~' : scratch[j];
|
||
card_info[k++] = '\0';
|
||
#ifdef ZP_DEBUG
|
||
printf("card info = %s\n", card_info);
|
||
printf("result = %d\n", memcmp (card_info, CARD_INFO, sizeof(CARD_INFO)-1) == 0);
|
||
#endif
|
||
return (memcmp (card_info, CARD_INFO, sizeof(CARD_INFO)-1) == 0);
|
||
}
|
||
i += 4 + 2 * link;
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* Probe each slot looking for an IBM Credit Card Adapter for Ethernet
|
||
* For each card that we find, map its card information structure
|
||
* into system memory at 'scratch' and see whether it's one of ours.
|
||
* Return the slot number if we find a card, or -1 otherwise.
|
||
*
|
||
* Side effects:
|
||
* + On success, leaves CIS mapped into memory at 'scratch';
|
||
* caller must free it.
|
||
* + On success, leaves ethernet address in enet_addr.
|
||
* + Leaves product/vendor id of last card probed in 'card_info'
|
||
*/
|
||
|
||
int prev_slot = 0;
|
||
|
||
static int
|
||
zp_find_adapter (unsigned char *scratch, int reconfig)
|
||
{
|
||
int slot;
|
||
|
||
for (slot = prev_slot; slot < MAXSLOT; ++slot) {
|
||
/*
|
||
* see if there's a PCMCIA controller here
|
||
* Intel PCMCIA controllers use 0x82 and 0x83
|
||
* IBM clone chips use 0x88 and 0x89, apparently
|
||
*/
|
||
/*
|
||
* IBM ThinkPad230Cs use 0x84.
|
||
*/
|
||
unsigned char idbyte = pcic_getb (slot, PCIC_ID_REV);
|
||
|
||
if (idbyte != 0x82 && idbyte != 0x83 &&
|
||
idbyte != 0x84 && /* for IBM ThinkPad 230Cs */
|
||
idbyte != 0x88 && idbyte != 0x89) {
|
||
#if 0
|
||
printf ("ibmccae: pcic slot %d: wierd id/rev code 0x%02x\n",
|
||
slot, idbyte);
|
||
#endif
|
||
continue;
|
||
}
|
||
if ((pcic_getb (slot, PCIC_STATUS) & PCIC_CD) != PCIC_CD) {
|
||
if (!reconfig) {
|
||
printf ("zp: slot %d: no card in slot\n", slot);
|
||
}
|
||
else {
|
||
log (LOG_NOTICE, "zp: slot %d: no card in slot\n", slot);
|
||
}
|
||
/* no card in slot */
|
||
continue;
|
||
}
|
||
pcic_power_on (slot);
|
||
pcic_reset (slot);
|
||
/*
|
||
* map the card's attribute memory and examine its
|
||
* card information structure tuples for something
|
||
* we recognize.
|
||
*/
|
||
#ifdef MACH_KERNEL
|
||
pcic_map_memory (slot, 0, scratch, 0L,
|
||
0xFFFL, ATTRIBUTE, 1);
|
||
#else /* MACH_KERNEL */
|
||
pcic_map_memory (slot, 0, kvtop (scratch), 0L,
|
||
0xFFFL, ATTRIBUTE, 1);
|
||
#endif /* MACH_KERNEL */
|
||
|
||
if ((zp_check_cis (scratch)) > 0) {
|
||
/* found it */
|
||
if (!reconfig) {
|
||
printf ("zp: found card in slot %d\n", slot);
|
||
}
|
||
else {
|
||
log (LOG_NOTICE, "zp: found card in slot %d\n", slot);
|
||
}
|
||
prev_slot = (prev_slot == MAXSLOT - 1) ? 0 : prev_slot+1;
|
||
|
||
return slot;
|
||
}
|
||
else {
|
||
if (!reconfig) {
|
||
printf ("zp: pcmcia slot %d: %s\n", slot, card_info);
|
||
}
|
||
else {
|
||
log (LOG_NOTICE, "zp: pcmcia slot %d: %s\n", slot, card_info);
|
||
}
|
||
}
|
||
pcic_unmap_memory (slot, 0);
|
||
}
|
||
prev_slot = 0;
|
||
return -1;
|
||
}
|
||
|
||
|
||
/*
|
||
* macros to handle casting unsigned long to (char *) so we can
|
||
* read/write into physical memory space.
|
||
*/
|
||
|
||
#define PEEK(addr) (*((unsigned char *)(addr)))
|
||
#define POKE(addr,val) do { PEEK(addr) = (val); } while (0)
|
||
|
||
/*
|
||
* Determine if the device is present
|
||
*
|
||
* on entry:
|
||
* a pointer to an isa_device struct
|
||
* on exit:
|
||
* NULL if device not found
|
||
* or # of i/o addresses used (if found)
|
||
*/
|
||
#ifdef MACH_KERNEL
|
||
int zpprobe(port,dev)
|
||
struct bus_device *dev;
|
||
#else /* MACH_KERNEL */
|
||
int
|
||
zpprobe(struct isa_device *isa_dev)
|
||
#endif /* MACH_KERNEL */
|
||
{
|
||
#ifdef MACH_KERNEL
|
||
zp_softc_t *sc = &zp_softc[dev->unit];
|
||
#else /* MACH_KERNEL */
|
||
struct zp_softc *sc = &zp_softc[isa_dev->id_unit];
|
||
#endif /* MACH_KERNEL */
|
||
int i, x;
|
||
u_int memsize;
|
||
u_char iptr, memwidth, sum, tmp;
|
||
int slot;
|
||
u_short k;
|
||
int id_port = 0x100; /* XXX */
|
||
int re_init_flag;
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpprobe ####\n");
|
||
#ifdef MACH_KERNEL
|
||
cngetc();
|
||
#endif /* MACH_KERNEL */
|
||
#endif /* ZP_DEBUG */
|
||
|
||
|
||
#ifdef MACH_KERNEL
|
||
#define DELAY(x) delay(x * 10)
|
||
sc->attached = 0;
|
||
BASE = dev->address;
|
||
#endif /* MACH_KERNEL */
|
||
|
||
if ((slot = zp_find_adapter (isa_dev->id_maddr, isa_dev->id_reconfig)) < 0)
|
||
return NULL;
|
||
|
||
/*
|
||
* okay, we found a card, so set it up
|
||
*/
|
||
/*
|
||
* Inhibit 16 bit memory delay.
|
||
* POINTETH.SYS apparently does this, for what reason I don't know.
|
||
*/
|
||
pcic_putb (slot, PCIC_CDGC,
|
||
pcic_getb (slot, PCIC_CDGC) | PCIC_16_DL_INH);
|
||
/*
|
||
* things to map
|
||
* (1) card's EEPROM is already mapped by the find_adapter routine
|
||
* but we still need to get the card's ethernet address.
|
||
* after that we unmap that part of attribute memory.
|
||
* (2) card configuration registers need to be mapped in so we
|
||
* can set the configuration and socket # registers.
|
||
* (3) shared memory packet buffer
|
||
* (4) i/o ports
|
||
* (5) IRQ
|
||
*/
|
||
#ifdef notdef
|
||
/*
|
||
* Sigh. Location of the ethernet address isn't documented in [1].
|
||
* It was derived by doing a hex dump of all of attribute memory
|
||
* and looking for the IBM vendor prefix.
|
||
*/
|
||
enet_addr[0] = PEEK(isa_dev->id_maddr+0xff0);
|
||
enet_addr[1] = PEEK(isa_dev->id_maddr+0xff2);
|
||
enet_addr[2] = PEEK(isa_dev->id_maddr+0xff4);
|
||
enet_addr[3] = PEEK(isa_dev->id_maddr+0xff6);
|
||
enet_addr[4] = PEEK(isa_dev->id_maddr+0xff8);
|
||
enet_addr[5] = PEEK(isa_dev->id_maddr+0xffa);
|
||
#endif
|
||
#if 0
|
||
pcic_unmap_memory (slot, 0);
|
||
#endif
|
||
re_init_flag = 0;
|
||
re_init:
|
||
/*
|
||
* (2) map card configuration registers. these are offset
|
||
* in card memory space by 0x20000. normally we could get
|
||
* this offset from the card information structure, but I'm
|
||
* too lazy and am not quite sure if I understand the CIS anyway.
|
||
*
|
||
* XXX IF YOU'RE TRYING TO PORT THIS DRIVER FOR A DIFFERENT
|
||
* PCMCIA CARD, the most likely thing to change is the constant
|
||
* 0x20000 in the next statement. Oh yes, also change the
|
||
* card id string that we probe for.
|
||
*/
|
||
#ifdef MACH_KERNEL
|
||
pcic_map_memory (slot, 0, dev->phys_address, 0x10000, 8L,
|
||
ATTRIBUTE, 1);
|
||
POKE(phystokv(dev->phys_address), 0x80); /* reset the card (how long?) */
|
||
DELAY (10000);
|
||
#else
|
||
pcic_map_memory (slot, 0, kvtop (isa_dev->id_maddr), 0x10000, 8L,
|
||
ATTRIBUTE, 1);
|
||
POKE(isa_dev->id_maddr, 0x80); /* reset the card (how long?) */
|
||
DELAY (40000);
|
||
#endif
|
||
/*
|
||
* Set the configuration index. According to [1], the adapter won't
|
||
* respond to any i/o signals until we do this; it uses the
|
||
* Memory Only interface (whatever that is; it's not documented).
|
||
* Also turn on "level" (not pulse) interrupts.
|
||
*
|
||
* XXX probably should init the socket and copy register also,
|
||
* so that we can deal with multiple instances of the same card.
|
||
*/
|
||
#ifdef MACH_KERNEL
|
||
POKE(phystokv(dev->phys_address), 0x41);
|
||
pcic_unmap_memory (slot, 0);
|
||
#else /* MACH_KERNEL */
|
||
POKE(isa_dev->id_maddr, 0x41);
|
||
pcic_unmap_memory (slot, 0);
|
||
#endif /* MACH_KERNEL*/
|
||
|
||
#ifdef notdef
|
||
/*
|
||
* (3) now map in the shared memory buffer. This has to be mapped
|
||
* as words, not bytes, and on a 16k boundary. The offset value
|
||
* was derived by installing IBM's POINTETH.SYS under DOS and
|
||
* looking at the PCIC registers; it's not documented in IBM's
|
||
* tech ref manual ([1]).
|
||
*/
|
||
pcic_map_memory (slot, 0, kvtop (isa_dev->id_maddr), 0x4000L, 0x4000L,
|
||
COMMON, 2);
|
||
#endif
|
||
|
||
/*
|
||
* (4) map i/o ports.
|
||
*
|
||
* XXX is it possible that the config file leaves this unspecified,
|
||
* in which case we have to pick one?
|
||
*
|
||
* At least one PCMCIA device driver I'v seen maps a block
|
||
* of 32 consecutive i/o ports as two windows of 16 ports each.
|
||
* Maybe some other pcic chips are restricted to 16-port windows;
|
||
* the 82365SL doesn't seem to have that problem. But since
|
||
* we have an extra window anyway...
|
||
*/
|
||
#ifdef MACH_KERNEL
|
||
pcic_map_io (slot, 0, dev->address, 16, 2);
|
||
#else
|
||
#if 1
|
||
pcic_map_io (slot, 0, isa_dev->id_iobase, 16, 2);
|
||
#else
|
||
pcic_map_io (slot, 0, isa_dev->id_iobase, 16, 1);
|
||
pcic_map_io (slot, 1, isa_dev->id_iobase + 16, 16, 1);
|
||
#endif
|
||
#endif
|
||
|
||
/*
|
||
* (5) configure the card for the desired interrupt
|
||
*
|
||
* XXX is it possible that the config file leaves this unspecified?
|
||
*/
|
||
pcic_map_irq (slot, ffs (isa_dev->id_irq) - 1);
|
||
|
||
/* tell the PCIC that this is an I/O card (not memory) */
|
||
pcic_putb (slot, PCIC_INT_GEN,
|
||
pcic_getb (slot, PCIC_INT_GEN) | PCIC_CARDTYPE);
|
||
|
||
#if 0
|
||
/* tell the PCIC to use level-mode interrupts */
|
||
/* XXX this register may not be present on all controllers */
|
||
pcic_putb (slot, PCIC_GLO_CTRL,
|
||
pcic_getb (slot, PCIC_GLO_CTRL) | PCIC_LVL_MODE);
|
||
#endif
|
||
|
||
#ifdef ZP_DEBUG
|
||
pcic_print_regs (slot);
|
||
#endif
|
||
#ifdef notdef
|
||
/* I couldn't find the following part in linux. seiji */
|
||
|
||
/*
|
||
* Setup i/o addresses
|
||
*/
|
||
sc->nic_addr = isa_dev->id_iobase;
|
||
#if 0
|
||
sc->vector = isa_dev->id_irq;
|
||
#endif
|
||
sc->smem_start = (caddr_t)isa_dev->id_maddr;
|
||
|
||
#if 0
|
||
sc->vendor = ZE_VENDOR_IBM;
|
||
sc->type = xxx;
|
||
#endif
|
||
|
||
/* reset card to force it into a known state */
|
||
tmp = inb (isa_dev->id_iobase + ZE_RESET);
|
||
DELAY(20000);
|
||
outb (isa_dev->id_iobase + ZE_RESET, tmp);
|
||
DELAY(20000);
|
||
|
||
/*
|
||
* query MAM bit in misc register for 10base2
|
||
*/
|
||
tmp = inb (isa_dev->id_iobase + ZE_MISC);
|
||
if (!tmp && !re_init_flag) {
|
||
re_init_flag++;
|
||
goto re_init;
|
||
}
|
||
sc->mau = tmp & 0x09 ? "10base2" : "10baseT";
|
||
#endif
|
||
|
||
#ifdef MACH_KERNEL
|
||
sc->ep_io_addr = dev->address;
|
||
#else /* MACH_KERNEL */
|
||
sc->ep_io_addr = isa_dev->id_iobase;
|
||
#endif /* MACH_KERNEL */
|
||
GO_WINDOW(0);
|
||
#if 0
|
||
k = get_eeprom_data(BASE, EEPROM_ADDR_CFG); /* get addr cfg */
|
||
#endif
|
||
k = read_eeprom_data(BASE, EEPROM_ADDR_CFG); /* get addr cfg */
|
||
#ifndef ORIGINAL
|
||
sc->if_port = k >> 14;
|
||
#endif /* ORIGINAL */
|
||
#ifdef ZP_DEBUG
|
||
printf("EEPROM data = 0x%x\n", k);
|
||
#endif
|
||
k = (k & 0x1f) * 0x10 + 0x200; /* decode base addr. */
|
||
#ifdef MACH_KERNEL
|
||
if (k != (u_short)dev->address)
|
||
#else /* MACH_KERNEL */
|
||
if (k != (u_short)isa_dev->id_iobase)
|
||
#endif /* MACH_KERNEL */
|
||
{
|
||
if (!re_init_flag) {
|
||
re_init_flag++;
|
||
goto re_init;
|
||
}
|
||
return(0);
|
||
}
|
||
|
||
k = read_eeprom_data(BASE, EEPROM_RESOURCE_CFG);
|
||
|
||
k >>= 12;
|
||
|
||
#ifdef MACH_KERNEL
|
||
#ifdef ZP_DEBUG
|
||
printf("!!!IRQ Mach config: %d, board config: %d!!!\n",
|
||
dev->sysdep1, (k == 2) ? 9 : k);
|
||
#ifdef MACH_KERNEL
|
||
cngetc();
|
||
#endif /* MACH_KERNEL */
|
||
#endif /* ZP_DEBUG */
|
||
if (dev->sysdep1 != ((k == 2) ? 9 : k))
|
||
#else /* MACH_KERNEL */
|
||
if (isa_dev->id_irq != (1 << ((k == 2) ? 9 : k)))
|
||
#endif /* MACH_KERNEL */
|
||
#ifdef ZP_DEBUG
|
||
{
|
||
printf("Unmatched !!!!!!\n");
|
||
return(0);
|
||
}
|
||
#else /* ZP_DEBUG */
|
||
return (0);
|
||
#endif /* ZP_DEBUG */
|
||
|
||
#if 0
|
||
outb(id_port, ACTIVATE_ADAPTER_TO_CONFIG);
|
||
#else
|
||
outb(BASE, ACTIVATE_ADAPTER_TO_CONFIG);
|
||
#endif
|
||
|
||
#ifdef MACH_KERNEL
|
||
dev->name = zp_name;
|
||
return (1);
|
||
#else /* MACH_KERNEL */
|
||
|
||
/* information for reconfiguration */
|
||
sc->last_alive = 0;
|
||
sc->last_up = 0;
|
||
sc->slot = slot;
|
||
|
||
return (0x10); /* 16 bytes of I/O space used. */
|
||
#endif /* MACH_KERNEL */
|
||
}
|
||
|
||
#if NAPM > 0
|
||
static int
|
||
zp_suspend(isa_dev)
|
||
struct isa_device *isa_dev;
|
||
{
|
||
struct zp_softc *sc = &zp_softc[isa_dev->id_unit];
|
||
|
||
pcic_power_off(sc->slot);
|
||
return 0;
|
||
}
|
||
|
||
static int
|
||
zp_resume(isa_dev)
|
||
struct isa_device *isa_dev;
|
||
{
|
||
prev_slot = 0;
|
||
reconfig_isadev(isa_dev, &net_imask);
|
||
return 0;
|
||
}
|
||
#endif /* NAPM > 0 */
|
||
|
||
|
||
/*
|
||
* Install interface into kernel networking data structures
|
||
*/
|
||
|
||
#ifdef MACH_KERNEL
|
||
void zpattach(dev)
|
||
struct bus_device *dev;
|
||
#else /* MACH_KERNEL */
|
||
int
|
||
zpattach(isa_dev)
|
||
struct isa_device *isa_dev;
|
||
#endif /* MACH_KERNEL */
|
||
{
|
||
#ifdef MACH_KERNEL
|
||
zp_softc_t *sc = &zp_softc[dev->unit];
|
||
struct ifnet *ifp = &(sc->ds_if);
|
||
#else /* MACH_KERNEL */
|
||
struct zp_softc *sc = &zp_softc[isa_dev->id_unit];
|
||
struct ifnet *ifp = &sc->arpcom.ac_if;
|
||
#endif /* MACH_KERNEL */
|
||
u_short i;
|
||
struct ifaddr *ifa;
|
||
struct sockaddr_dl *sdl;
|
||
int pl;
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpattach ####\n");
|
||
cngetc();
|
||
#endif /* ZP_DEBUG */
|
||
|
||
/* PCMCIA card can be offlined. Reconfiguration is required */
|
||
if (isa_dev->id_reconfig) {
|
||
zpreset(isa_dev->id_unit);
|
||
if (!isa_dev->id_alive && sc->last_alive) {
|
||
pl = splimp();
|
||
sc->last_up = (ifp->if_flags & IFF_UP);
|
||
if_down(ifp);
|
||
splx(pl);
|
||
sc->last_alive = 0;
|
||
}
|
||
if (isa_dev->id_alive && !sc->last_alive) {
|
||
if (sc->last_up) {
|
||
pl = splimp();
|
||
if_up(ifp);
|
||
splx(pl);
|
||
}
|
||
sc->last_alive = 1;
|
||
}
|
||
return 1;
|
||
}
|
||
else {
|
||
sc->last_alive = 1;
|
||
}
|
||
|
||
|
||
#ifdef MACH_KERNEL
|
||
printf(", port = %x, spl = %d, pic = %d. ",
|
||
dev->address, dev->sysdep, dev->sysdep1);
|
||
|
||
take_dev_irq(dev);
|
||
sc->ep_io_addr = dev->address;
|
||
#else /* MACH_KERNEL */
|
||
sc->ep_io_addr = isa_dev->id_iobase;
|
||
printf("zp%d: ", isa_dev->id_unit);
|
||
#endif /* MACH_KERNEL */
|
||
|
||
sc->ep_connectors = 0;
|
||
|
||
#ifdef MACH_KERNEL
|
||
i = inw(sc->ep_io_addr + EP_W0_CONFIG_CTRL);
|
||
#else /* MACH_KERNEL */
|
||
i = inw(isa_dev->id_iobase + EP_W0_CONFIG_CTRL);
|
||
#endif /* MACH_KERNEL */
|
||
|
||
#ifdef ZP_DEBUG
|
||
{
|
||
short if_port;
|
||
if_port = read_eeprom_data(BASE, 8) >> 14;
|
||
sc->if_port = if_port;
|
||
printf("Linux select:%x\n",if_port);
|
||
cngetc();
|
||
}
|
||
|
||
printf("SELECT connectors:%x\n",i);
|
||
#endif /* ZP_DEBUG */
|
||
|
||
if (i & IS_AUI) {
|
||
printf("aui");
|
||
sc->ep_connectors |= AUI;
|
||
}
|
||
if (i & IS_BNC) {
|
||
if (sc->ep_connectors)
|
||
printf("/");
|
||
printf("bnc");
|
||
sc->ep_connectors |= BNC;
|
||
}
|
||
if (i & IS_UTP) {
|
||
if (sc->ep_connectors)
|
||
printf("/");
|
||
printf("utp");
|
||
sc->ep_connectors |= UTP;
|
||
}
|
||
if (!sc->ep_connectors)
|
||
printf("no connectors!");
|
||
|
||
#ifdef MACH_KERNEL
|
||
#ifndef ORIGINAL
|
||
printf(":%s was selected.\n",if_names[sc->if_port]);
|
||
#ifdef ZP_DEBUG
|
||
cngetc();
|
||
#endif /* EP_DEBUG */
|
||
#endif /* ORIGINAL */
|
||
#endif /* MACH_KERNEL */
|
||
|
||
GO_WINDOW(0);
|
||
{
|
||
short tmp_addr[3];
|
||
int i;
|
||
for (i = 0;i < 3;i++) {
|
||
tmp_addr[i] = htons(read_eeprom_data(BASE, i));
|
||
}
|
||
#ifdef MACH_KERNEL
|
||
bcopy(tmp_addr, sc->ds_addr, 6);
|
||
#else /* MACH_KERNEL */
|
||
bcopy(tmp_addr, sc->arpcom.ac_enaddr, 6);
|
||
#endif /* MACH_KERNEL */
|
||
}
|
||
|
||
#ifdef MACH_KERNEL
|
||
printf("id [%x:%x:%x:%x:%x:%x]",
|
||
sc->ds_addr[0],sc->ds_addr[1],sc->ds_addr[2],
|
||
sc->ds_addr[3],sc->ds_addr[4],sc->ds_addr[5]);
|
||
printf(" address %s\n", ether_sprintf(sc->ds_addr));
|
||
#ifdef ZP_DEBUG
|
||
cngetc();
|
||
#endif /* ZP_DEBUG */
|
||
#else /* MACH_KERNEL */
|
||
printf(" address %s\n", ether_sprintf(sc->arpcom.ac_enaddr));
|
||
#endif /* MACH_KERNEL */
|
||
|
||
ifp->if_mtu = ETHERMTU;
|
||
#ifdef MACH_KERNEL
|
||
ifp->if_flags = IFF_BROADCAST;
|
||
ifp->if_unit = dev->unit;
|
||
ifp->if_header_size = sizeof(struct ether_header);
|
||
ifp->if_header_format = HDR_ETHERNET;
|
||
ifp->if_address_size = 6;
|
||
ifp->if_address = (char *)&sc->ds_addr[0];
|
||
|
||
#define IFF_ALTPHYS 0x8000
|
||
|
||
#ifdef ORIGINAL
|
||
/*
|
||
* This is a temporary.
|
||
* Mach can not select link with ifconfig,
|
||
* so I select AUI statically.
|
||
*/
|
||
ifp->if_flags |= IFF_ALTPHYS;
|
||
#else ORIGINAL
|
||
/*
|
||
* Select connector according to board setting.
|
||
*/
|
||
if (sc->if_port != 3) {
|
||
ifp->if_flags |= IFF_ALTPHYS;
|
||
}
|
||
#endif ORIGINAL
|
||
|
||
if_init_queues(ifp);
|
||
sc->attached = 1;
|
||
|
||
#else /* MACH_KERNEL */
|
||
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS;
|
||
ifp->if_unit = isa_dev->id_unit;
|
||
ifp->if_name = "zp";
|
||
ifp->if_init = zpinit;
|
||
ifp->if_output = ether_output;
|
||
ifp->if_start = zpstart;
|
||
ifp->if_ioctl = zpioctl;
|
||
ifp->if_watchdog = zpwatchdog;
|
||
/*
|
||
* Select connector according to board setting.
|
||
*/
|
||
#if defined(__NetBSD__) || defined(__FreeBSD__)
|
||
#if 0
|
||
if (sc->if_port != 3) {
|
||
ifp->if_flags |= IFF_LINK0;
|
||
}
|
||
#else
|
||
ifp->if_flags |= IFF_LINK0;
|
||
#endif
|
||
#endif /* __NetBSD__ || __FreeBSD__ */
|
||
|
||
if_attach(ifp);
|
||
#endif /* MACH_KERNEL */
|
||
|
||
#ifndef MACH_KERNEL
|
||
/*
|
||
* Fill the hardware address into ifa_addr if we find an
|
||
* AF_LINK entry. We need to do this so bpf's can get the hardware
|
||
* addr of this card. netstat likes this too!
|
||
*/
|
||
ifa = ifp->if_addrlist;
|
||
while ((ifa != 0) && (ifa->ifa_addr != 0) &&
|
||
(ifa->ifa_addr->sa_family != AF_LINK))
|
||
ifa = ifa->ifa_next;
|
||
|
||
if ((ifa != 0) && (ifa->ifa_addr != 0)) {
|
||
sdl = (struct sockaddr_dl *) ifa->ifa_addr;
|
||
sdl->sdl_type = IFT_ETHER;
|
||
sdl->sdl_alen = ETHER_ADDR_LEN;
|
||
sdl->sdl_slen = 0;
|
||
bcopy(sc->arpcom.ac_enaddr, LLADDR(sdl), ETHER_ADDR_LEN);
|
||
}
|
||
#if NBPFILTER > 0
|
||
bpfattach(&sc->bpf, ifp, DLT_EN10MB, sizeof(struct ether_header));
|
||
#endif
|
||
#if NAPM > 0
|
||
sc->s_hook.ah_fun = zp_suspend;
|
||
sc->s_hook.ah_arg = (void *)isa_dev;
|
||
sc->s_hook.ah_name = "3Com PCMCIA Etherlink III 3C589";
|
||
sc->s_hook.ah_order = APM_MID_ORDER;
|
||
apm_hook_establish(APM_HOOK_SUSPEND , &sc->s_hook);
|
||
sc->r_hook.ah_fun = zp_resume;
|
||
sc->r_hook.ah_arg = (void *)isa_dev;
|
||
sc->r_hook.ah_name = "3Com PCMCIA Etherlink III 3C589";
|
||
sc->r_hook.ah_order = APM_MID_ORDER;
|
||
apm_hook_establish(APM_HOOK_RESUME , &sc->r_hook);
|
||
#endif /* NAPM > 0 */
|
||
return 1;
|
||
#endif /* MACH_KERNEL */
|
||
}
|
||
|
||
/*
|
||
* The order in here seems important. Otherwise we may not receive
|
||
* interrupts. ?!
|
||
*/
|
||
void
|
||
zpinit(unit)
|
||
int unit;
|
||
{
|
||
register struct zp_softc *sc = &zp_softc[unit];
|
||
#ifdef MACH_KERNEL
|
||
register struct ifnet *ifp = &sc->ds_if;
|
||
#else /* MACH_KERNEL */
|
||
register struct ifnet *ifp = &sc->arpcom.ac_if;
|
||
#endif /* MACH_KERNEL */
|
||
int s, i;
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpinit ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
#ifndef MACH_KERNEL
|
||
if (ifp->if_addrlist == (struct ifaddr *) 0)
|
||
return;
|
||
#endif /* MACH_KERNEL */
|
||
|
||
s = splimp();
|
||
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS)
|
||
;
|
||
|
||
GO_WINDOW(0);
|
||
|
||
/* Disable the card */
|
||
outw(BASE + EP_W0_CONFIG_CTRL, 0);
|
||
|
||
/* Enable the card */
|
||
outw(BASE + EP_W0_CONFIG_CTRL, ENABLE_DRQ_IRQ);
|
||
|
||
GO_WINDOW(2);
|
||
|
||
/* Reload the ether_addr. */
|
||
for (i = 0; i < 6; i++)
|
||
#ifdef MACH_KERNEL
|
||
outb(BASE + EP_W2_ADDR_0 + i, sc->ds_addr[i]);
|
||
#else /* MACH_KERNEL */
|
||
outb(BASE + EP_W2_ADDR_0 + i, sc->arpcom.ac_enaddr[i]);
|
||
#endif /* MACH_KERNEL */
|
||
|
||
outw(BASE + EP_COMMAND, RX_RESET);
|
||
outw(BASE + EP_COMMAND, TX_RESET);
|
||
|
||
/* Window 1 is operating window */
|
||
GO_WINDOW(1);
|
||
for (i = 0; i < 31; i++)
|
||
inb(BASE + EP_W1_TX_STATUS);
|
||
|
||
/* get rid of stray intr's */
|
||
outw(BASE + EP_COMMAND, ACK_INTR | 0xff);
|
||
|
||
outw(BASE + EP_COMMAND, SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
|
||
S_TX_COMPLETE | S_TX_AVAIL);
|
||
outw(BASE + EP_COMMAND, SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
|
||
S_TX_COMPLETE | S_TX_AVAIL);
|
||
|
||
#ifndef ORIGINAL
|
||
#ifndef IFF_MULTICAST
|
||
#define IFF_MULTICAST 0x10000
|
||
#endif
|
||
|
||
#ifdef MACH_KERNEL
|
||
outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL |
|
||
((sc->ds_if.if_flags & IFF_MULTICAST) ? FIL_GROUP : 0) |
|
||
FIL_BRDCST |
|
||
((sc->ds_if.if_flags & IFF_PROMISC) ? FIL_ALL : 0));
|
||
#else
|
||
outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL |
|
||
((sc->arpcom.ac_if.if_flags & IFF_MULTICAST) ? FIL_GROUP : 0) |
|
||
FIL_BRDCST |
|
||
((sc->arpcom.ac_if.if_flags & IFF_PROMISC) ? FIL_ALL : 0));
|
||
#endif MACH_KERNEL
|
||
#else /* ORIGINAL */
|
||
outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL |
|
||
FIL_GROUP | FIL_BRDCST);
|
||
#endif /* ORIGINAL */
|
||
/*
|
||
* you can `ifconfig (link0|-link0) ep0' to get the following
|
||
* behaviour:
|
||
* -link0 disable AUI/UTP. enable BNC.
|
||
* link0 disable BNC. enable AUI. if the card has a UTP
|
||
* connector, that is enabled too. not sure, but it
|
||
* seems you have to be careful to not plug things
|
||
* into both AUI & UTP.
|
||
*/
|
||
|
||
#if defined(__NetBSD__) || defined(__FreeBSD__)
|
||
if (!(ifp->if_flags & IFF_LINK0) && (sc->ep_connectors & BNC)) {
|
||
#else
|
||
if (!(ifp->if_flags & IFF_ALTPHYS) && (sc->ep_connectors & BNC)) {
|
||
#endif
|
||
#ifdef ZP_DEBUG
|
||
printf("START TRANCEIVER");
|
||
#endif /* ZP_DEBUG */
|
||
outw(BASE + EP_COMMAND, START_TRANSCEIVER);
|
||
DELAY(1000);
|
||
}
|
||
|
||
#if defined(__NetBSD__) || defined(__FreeBSD__)
|
||
if ((ifp->if_flags & IFF_LINK0) && (sc->ep_connectors & UTP)) {
|
||
#else
|
||
if ((ifp->if_flags & IFF_ALTPHYS) && (sc->ep_connectors & UTP)) {
|
||
#endif
|
||
#ifdef ZP_DEBUG
|
||
printf("ENABLE UTP");
|
||
#endif /* ZP_DEBUG */
|
||
GO_WINDOW(4);
|
||
outw(BASE + EP_W4_MEDIA_TYPE, ENABLE_UTP);
|
||
GO_WINDOW(1);
|
||
}
|
||
|
||
outw(BASE + EP_COMMAND, RX_ENABLE);
|
||
outw(BASE + EP_COMMAND, TX_ENABLE);
|
||
|
||
ifp->if_flags |= IFF_RUNNING;
|
||
#ifndef MACH_KERNEL
|
||
ifp->if_flags &= ~IFF_OACTIVE; /* just in case */
|
||
#endif /* MACH_KERNEL */
|
||
sc->tx_start_thresh = 20; /* probably a good starting point. */
|
||
#ifndef MACH_KERNEL
|
||
/*
|
||
* Store up a bunch of mbuf's for use later. (MAX_MBS). First we
|
||
* free up any that we had in case we're being called from intr or
|
||
* somewhere else.
|
||
*/
|
||
sc->last_mb = 0;
|
||
sc->next_mb = 0;
|
||
zpmbuffill(sc);
|
||
#endif /* MACH_KERNEL */
|
||
#ifdef MACH_KERNEL
|
||
#if 0 /* seiji */
|
||
sc->tbusy = 0;
|
||
#endif
|
||
zpstart(unit);
|
||
#else /* MACH_KERNEL */
|
||
zpstart(ifp);
|
||
#endif /* MACH_KERNEL */
|
||
splx(s);
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpinit done ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
}
|
||
|
||
static const char padmap[] = {0, 3, 2, 1};
|
||
|
||
#ifdef MACH_KERNEL
|
||
void
|
||
zpstart(unit)
|
||
int unit;
|
||
#else /* MACH_KERNEL */
|
||
void
|
||
zpstart(ifp)
|
||
struct ifnet *ifp;
|
||
#endif /* MACH_KERNEL */
|
||
{
|
||
#ifdef MACH_KERNEL
|
||
register struct zp_softc *sc = &zp_softc[unit];
|
||
struct ifnet *ifp = &sc->ds_if;
|
||
io_req_t m;
|
||
#else /* MACH_KERNEL */
|
||
register struct zp_softc *sc = &zp_softc[ifp->if_unit];
|
||
struct mbuf *m, *top;
|
||
#endif /* MACH_KERNEL */
|
||
|
||
int s, len, pad;
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpstart ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
#ifdef ZP_DEBUG
|
||
printf("head1 = 0x%x\n", sc->arpcom.ac_if.if_snd.ifq_head);
|
||
printf("BASE = 0x%x\n", BASE);
|
||
#endif
|
||
|
||
s = splimp();
|
||
|
||
#ifndef MACH_KERNEL
|
||
if (sc->arpcom.ac_if.if_flags & IFF_OACTIVE) {
|
||
splx(s);
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpstart oactive ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
return;
|
||
}
|
||
#endif /* MACH_KERNEL */
|
||
|
||
startagain:
|
||
|
||
#ifdef MACH_KERNEL
|
||
|
||
#if 0 /* seiji */
|
||
if (sc->tbusy) {
|
||
return;
|
||
}
|
||
#endif
|
||
/* Sneak a peek at the next packet */
|
||
m = (io_req_t)
|
||
((ifp->if_snd.ifq_head.next == (queue_t)&(ifp->if_snd.ifq_head)) ?
|
||
0 : ifp->if_snd.ifq_head.next);
|
||
if (m == 0) {
|
||
splx(s);
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpstart none data 1 ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
return;
|
||
}
|
||
#if 0
|
||
IF_DEQUEUE(&ifp->if_snd, m);
|
||
if (NULL == m) {
|
||
return;
|
||
}
|
||
#endif
|
||
|
||
#if 0 /* seiji */
|
||
sc->tbusy++;
|
||
zp_cntrs[unit].xmt++;
|
||
#endif
|
||
len = m->io_count;
|
||
#else /* MACH_KERNEL */
|
||
|
||
/* Sneak a peek at the next packet */
|
||
m = sc->arpcom.ac_if.if_snd.ifq_head;
|
||
#ifdef ZP_DEBUG
|
||
printf("head2 = 0x%x\n", sc->arpcom.ac_if.if_snd.ifq_head);
|
||
#endif
|
||
if (m == 0) {
|
||
splx(s);
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpstart none data 2 ####\n");
|
||
#endif /* EP_DEBUG */
|
||
return;
|
||
}
|
||
#if 0
|
||
len = m->m_pkthdr.len;
|
||
#else
|
||
for (len = 0, top = m; m; m = m->m_next)
|
||
len += m->m_len;
|
||
#endif
|
||
#endif /* MACH_KERNEL */
|
||
|
||
pad = padmap[len & 3];
|
||
|
||
/*
|
||
* The 3c509 automatically pads short packets to minimum ethernet
|
||
* length, but we drop packets that are too large. Perhaps we should
|
||
* truncate them instead?
|
||
*/
|
||
if (len + pad > ETHER_MAX_LEN) {
|
||
/* packet is obviously too large: toss it */
|
||
#ifdef MACH_KERNEL
|
||
++(ifp->if_oerrors);
|
||
IF_DEQUEUE(&(ifp->if_snd), m);
|
||
iodone(m);
|
||
|
||
#else /* MACH_KERNEL */
|
||
++sc->arpcom.ac_if.if_oerrors;
|
||
IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, m);
|
||
m_freem(m);
|
||
#endif /* MACH_KERNEL */
|
||
goto readcheck;
|
||
}
|
||
#if 1
|
||
if (inw(BASE + EP_W1_FREE_TX) < len + pad + 4) {
|
||
/* no room in FIFO */
|
||
outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | (len + pad + 4));
|
||
#ifndef MACH_KERNEL
|
||
sc->arpcom.ac_if.if_flags |= IFF_OACTIVE;
|
||
#endif /* MACH_KERNEL */
|
||
splx(s);
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpstart no room ####\n");
|
||
#endif /* EP_DEBUG */
|
||
return;
|
||
}
|
||
#else
|
||
{int i;
|
||
if ((i = inw(BASE + EP_W1_FREE_TX)) < len + pad + 4) {
|
||
printf("BASE + EP_W1_FREE_TX = 0x%x\n", i);
|
||
/* no room in FIFO */
|
||
outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | (len + pad + 4));
|
||
#ifndef MACH_KERNEL
|
||
sc->arpcom.ac_if.if_flags |= IFF_OACTIVE;
|
||
#endif /* MACH_KERNEL */
|
||
splx(s);
|
||
|
||
printf("### zpstart no room ####\n");
|
||
return;
|
||
}
|
||
printf("BASE + EP_W1_FREE_TX = 0x%x\n", i);
|
||
}
|
||
#endif
|
||
#ifdef MACH_KERNEL
|
||
IF_DEQUEUE(&(ifp->if_snd), m);
|
||
#else /* MACH_KERNEL */
|
||
IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, m);
|
||
#endif /* MACH_KERNEL */
|
||
|
||
if (m == 0) { /* not really needed */
|
||
splx(s);
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpstart ??? ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
return;
|
||
}
|
||
outw(BASE + EP_COMMAND, SET_TX_START_THRESH |
|
||
(len / 4 + sc->tx_start_thresh));
|
||
|
||
outw(BASE + EP_W1_TX_PIO_WR_1, len);
|
||
outw(BASE + EP_W1_TX_PIO_WR_1, 0xffff); /* Second dword meaningless */
|
||
|
||
#ifdef MACH_KERNEL
|
||
if (sc->bus32bit) {
|
||
loutl(BASE + EP_W1_TX_PIO_WR_1, m->io_data,len/4);
|
||
if (len & 3)
|
||
loutb(BASE + EP_W1_TX_PIO_WR_1,
|
||
m->io_data + (len & ~3), len & 3);
|
||
} else {
|
||
loutw(BASE + EP_W1_TX_PIO_WR_1, m->io_data, len/2);
|
||
if (len & 1)
|
||
outb(BASE + EP_W1_TX_PIO_WR_1, *(m->io_data + len - 1));
|
||
}
|
||
#else /* MACH_KERNEL */
|
||
for (top = m; m != 0; m = m->m_next) {
|
||
if (sc->bus32bit) {
|
||
outsl(BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t),
|
||
m->m_len/4);
|
||
if (m->m_len & 3)
|
||
outsb(BASE + EP_W1_TX_PIO_WR_1,
|
||
mtod(m, caddr_t) + m->m_len/4,
|
||
m->m_len & 3);
|
||
} else {
|
||
#ifdef ZP_DEBUG
|
||
printf("Output len = %d\n", m->m_len);
|
||
#endif /* ZP_DEBUG */
|
||
outsw(BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t), m->m_len/2);
|
||
if (m->m_len & 1)
|
||
outb(BASE + EP_W1_TX_PIO_WR_1,
|
||
*(mtod(m, caddr_t) + m->m_len - 1));
|
||
}
|
||
}
|
||
#endif /* MACH_KERNEL */
|
||
while (pad--)
|
||
outb(BASE + EP_W1_TX_PIO_WR_1, 0); /* Padding */
|
||
|
||
#ifndef MACH_KERNEL
|
||
#if NBPFILTER > 0
|
||
if (sc->bpf) {
|
||
#if 0
|
||
u_short etype;
|
||
int off, datasize, resid;
|
||
struct ether_header *eh;
|
||
struct trailer_header {
|
||
u_short ether_type;
|
||
u_short ether_residual;
|
||
} trailer_header;
|
||
char ether_packet[ETHER_MAX_LEN];
|
||
char *ep;
|
||
|
||
ep = ether_packet;
|
||
|
||
/*
|
||
* We handle trailers below:
|
||
* Copy ether header first, then residual data,
|
||
* then data. Put all this in a temporary buffer
|
||
* 'ether_packet' and send off to bpf. Since the
|
||
* system has generated this packet, we assume
|
||
* that all of the offsets in the packet are
|
||
* correct; if they're not, the system will almost
|
||
* certainly crash in m_copydata.
|
||
* We make no assumptions about how the data is
|
||
* arranged in the mbuf chain (i.e. how much
|
||
* data is in each mbuf, if mbuf clusters are
|
||
* used, etc.), which is why we use m_copydata
|
||
* to get the ether header rather than assume
|
||
* that this is located in the first mbuf.
|
||
*/
|
||
/* copy ether header */
|
||
m_copydata(top, 0, sizeof(struct ether_header), ep);
|
||
eh = (struct ether_header *) ep;
|
||
ep += sizeof(struct ether_header);
|
||
eh->ether_type = etype = ntohs(eh->ether_type);
|
||
if (etype >= ETHERTYPE_TRAIL &&
|
||
etype < ETHERTYPE_TRAIL + ETHERTYPE_NTRAILER) {
|
||
datasize = ((etype - ETHERTYPE_TRAIL) << 9);
|
||
off = datasize + sizeof(struct ether_header);
|
||
|
||
/* copy trailer_header into a data structure */
|
||
m_copydata(top, off, sizeof(struct trailer_header),
|
||
(caddr_t)&trailer_header.ether_type);
|
||
|
||
/* copy residual data */
|
||
resid = trailer_header.ether_residual -
|
||
sizeof(struct trailer_header);
|
||
resid = ntohs(resid);
|
||
m_copydata(top, off + sizeof(struct trailer_header),
|
||
resid, ep);
|
||
ep += resid;
|
||
|
||
/* copy data */
|
||
m_copydata(top, sizeof(struct ether_header),
|
||
datasize, ep);
|
||
ep += datasize;
|
||
|
||
/* restore original ether packet type */
|
||
eh->ether_type = trailer_header.ether_type;
|
||
|
||
bpf_tap(sc->bpf, ether_packet, ep - ether_packet);
|
||
} else
|
||
bpf_mtap(sc->bpf, top);
|
||
#endif
|
||
|
||
bpf_mtap(sc->bpf, top);
|
||
}
|
||
#endif
|
||
#endif /* MACH_KERNEL */
|
||
|
||
#ifdef MACH_KERNEL
|
||
++(ifp->if_opackets);
|
||
iodone(m);
|
||
#else /* MACH_KERNEL */
|
||
m_freem(top);
|
||
++sc->arpcom.ac_if.if_opackets;
|
||
#endif /* MACH_KERNEL */
|
||
/*
|
||
* Is another packet coming in? We don't want to overflow the
|
||
* tiny RX fifo.
|
||
*/
|
||
readcheck:
|
||
if (inw(BASE + EP_W1_RX_STATUS) & RX_BYTES_MASK) {
|
||
splx(s);
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpstart done ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
return;
|
||
}
|
||
#ifdef ZP_DEBUG2
|
||
printf("### zpstart startagain ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
goto startagain;
|
||
}
|
||
|
||
#ifdef MACH_KERNEL
|
||
int zpopen(dev, flag)
|
||
dev_t dev;
|
||
int flag;
|
||
{
|
||
register int unit = minor(dev);
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpopen ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
if (unit < 0 || unit >= NZP || zp_softc[unit].attached == 0) {
|
||
return (ENXIO);
|
||
}
|
||
|
||
zp_softc[unit].ds_if.if_flags |= IFF_UP;
|
||
zpinit(unit);
|
||
return (0);
|
||
}
|
||
|
||
int zpoutput(dev, ior)
|
||
dev_t dev;
|
||
io_req_t ior;
|
||
{
|
||
register int unit = minor(dev);
|
||
io_return_t result;
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpoutput ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
if (unit < 0 || unit >= NZP || zp_softc[unit].attached == 0) {
|
||
return (ENXIO);
|
||
}
|
||
result = net_write(&zp_softc[unit].ds_if, zpstart, ior);
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpoutput done ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
return (result);
|
||
}
|
||
|
||
int zpsetinput(dev, receive_port, priority, filter, filter_count)
|
||
dev_t dev;
|
||
mach_port_t receive_port;
|
||
int priority;
|
||
filter_t filter[];
|
||
unsigned int filter_count;
|
||
{
|
||
register int unit = minor(dev);
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpsetinput ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
if (unit < 0 || unit >= NZP || zp_softc[unit].attached == 0) {
|
||
return (ENXIO);
|
||
}
|
||
return (net_set_filter(&zp_softc[unit].ds_if,
|
||
receive_port, priority, filter,
|
||
filter_count));
|
||
}
|
||
|
||
#endif /* MACH_KERNEL */
|
||
|
||
#ifdef MACH_KERNEL
|
||
int
|
||
#else /* MACH_KERNEL */
|
||
void
|
||
#endif /* MACH_KERNEL */
|
||
zpintr(unit)
|
||
int unit;
|
||
{
|
||
int status, i;
|
||
register struct zp_softc *sc = &zp_softc[unit];
|
||
|
||
#ifdef MACH_KERNEL
|
||
struct ifnet *ifp = &sc->ds_if;
|
||
#else /* MACH_KERNEL */
|
||
struct ifnet *ifp = &sc->arpcom.ac_if;
|
||
struct mbuf *m;
|
||
#endif /* MACH_KERNEL */
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpintr ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
status = 0;
|
||
checkintr:
|
||
status = inw(BASE + EP_STATUS) &
|
||
(S_TX_COMPLETE | S_TX_AVAIL | S_RX_COMPLETE | S_CARD_FAILURE);
|
||
#ifndef ORIGINAL
|
||
checkintr2:
|
||
#endif /* ORIGINAL */
|
||
if (status == 0) {
|
||
/* No interrupts. */
|
||
outw(BASE + EP_COMMAND, C_INTR_LATCH);
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpintr done ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
#ifndef ORIGINAL
|
||
if (status = inw(BASE + EP_STATUS) &
|
||
(S_TX_COMPLETE | S_TX_AVAIL | S_RX_COMPLETE |
|
||
S_CARD_FAILURE)) {
|
||
goto checkintr2;
|
||
}
|
||
#endif /* ORIGINAL */
|
||
|
||
#ifdef MACH_KERNEL
|
||
return (0);
|
||
#else /* MACH_KERNEL */
|
||
return;
|
||
#endif /* MACH_KERNEL */
|
||
}
|
||
/* important that we do this first. */
|
||
outw(BASE + EP_COMMAND, ACK_INTR | status);
|
||
|
||
if (status & S_TX_AVAIL) {
|
||
status &= ~S_TX_AVAIL;
|
||
inw(BASE + EP_W1_FREE_TX);
|
||
#ifdef MACH_KERNEL
|
||
zpstart(unit);
|
||
#else /* MACH_KERNEL */
|
||
sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
|
||
zpstart(&sc->arpcom.ac_if);
|
||
#endif /* MACH_KERNEL */
|
||
|
||
}
|
||
if (status & S_RX_COMPLETE) {
|
||
status &= ~S_RX_COMPLETE;
|
||
zpread(sc);
|
||
}
|
||
if (status & S_CARD_FAILURE) {
|
||
printf("zp%d: reset (status: %x)\n", unit, status);
|
||
outw(BASE + EP_COMMAND, C_INTR_LATCH);
|
||
zpinit(unit);
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpintr error ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
#ifdef MACH_KERNEL
|
||
return (0);
|
||
#else /* MACH_KERNEL */
|
||
return;
|
||
#endif /* MACH_KERNEL */
|
||
}
|
||
if (status & S_TX_COMPLETE) {
|
||
status &= ~S_TX_COMPLETE;
|
||
/*
|
||
* We need to read TX_STATUS until we get a 0 status in
|
||
* order to turn off the interrupt flag.
|
||
*/
|
||
while ((i = inb(BASE + EP_W1_TX_STATUS)) & TXS_COMPLETE) {
|
||
outw(BASE + EP_W1_TX_STATUS, 0x0);
|
||
#if ZE_DEBUG
|
||
printf("EP_W1_TX_STATUS = 0x%x\n", i);
|
||
#endif
|
||
if (i & (TXS_MAX_COLLISION | TXS_JABBER | TXS_UNDERRUN)) {
|
||
if (i & TXS_MAX_COLLISION)
|
||
#ifdef MACH_KERNEL
|
||
++(ifp->if_collisions);
|
||
#else /* MACH_KERNEL */
|
||
++sc->arpcom.ac_if.if_collisions;
|
||
#endif /* MACH_KERNEL */
|
||
if (i & (TXS_JABBER | TXS_UNDERRUN)) {
|
||
outw(BASE + EP_COMMAND, TX_RESET);
|
||
if (i & TXS_UNDERRUN) {
|
||
if (sc->tx_start_thresh < ETHER_MAX_LEN) {
|
||
sc->tx_start_thresh += 20;
|
||
outw(BASE + EP_COMMAND,
|
||
SET_TX_START_THRESH |
|
||
sc->tx_start_thresh);
|
||
}
|
||
}
|
||
}
|
||
outw(BASE + EP_COMMAND, TX_ENABLE);
|
||
#ifdef MACH_KERNEL
|
||
++(ifp->if_oerrors);
|
||
#else /* MACH_KERNEL */
|
||
++sc->arpcom.ac_if.if_oerrors;
|
||
#endif /* MACH_KERNEL */
|
||
}
|
||
}
|
||
#ifdef MACH_KERNEL
|
||
zpstart(unit);
|
||
#else /* MACH_KERNEL */
|
||
zpstart(ifp);
|
||
#endif /* MACH_KERNEL */
|
||
}
|
||
goto checkintr;
|
||
}
|
||
|
||
void
|
||
zpread(sc)
|
||
register struct zp_softc *sc;
|
||
{
|
||
struct ether_header *eh;
|
||
#ifdef MACH_KERNEL
|
||
struct ether_header eth;
|
||
ipc_kmsg_t new_kmsg;
|
||
struct packet_header *pkt;
|
||
int totlen;
|
||
#else /* MACH_KERNEL */
|
||
struct mbuf *mcur, *m, *m0, *top;
|
||
int totlen, lenthisone;
|
||
int save_totlen;
|
||
u_short etype;
|
||
int off, resid;
|
||
int count, spinwait;
|
||
#endif /* MACH_KERNEL */
|
||
int i;
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpread ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
totlen = inw(BASE + EP_W1_RX_STATUS);
|
||
#ifndef MACH_KERNEL
|
||
off = 0;
|
||
top = 0;
|
||
#endif /* MACH_KERNEL */
|
||
|
||
if (totlen & ERR_RX) {
|
||
#ifdef MACH_KERNEL
|
||
++(sc->ds_if.if_ierrors);
|
||
#else /* MACH_KERNEL */
|
||
++sc->arpcom.ac_if.if_ierrors;
|
||
#endif /* MACH_KERNEL */
|
||
goto out;
|
||
}
|
||
#ifdef MACH_KERNEL
|
||
totlen &= RX_BYTES_MASK; /* Lower 11 bits = RX bytes. */
|
||
#else /* MACH_KERNEL */
|
||
save_totlen = totlen &= RX_BYTES_MASK; /* Lower 11 bits = RX bytes. */
|
||
#endif /* MACH_KERNEL */
|
||
|
||
#ifdef MACH_KERNEL
|
||
/* Get Etherheader */
|
||
|
||
linw(BASE + EP_W1_RX_PIO_RD_1,
|
||
(char *)ð, sizeof(struct ether_header) / 2);
|
||
totlen -= sizeof(struct ether_header);
|
||
|
||
new_kmsg = net_kmsg_get();
|
||
if (new_kmsg == IKM_NULL) {
|
||
/* Drop the packet */
|
||
++(sc->ds_if.if_rcvdrops);
|
||
/*
|
||
* Is this true ?
|
||
* Do I have to remove the packet ?
|
||
* Maybe out discard incoming packet.
|
||
*/
|
||
goto out;
|
||
}
|
||
eh = (struct ether_header *)(&net_kmsg(new_kmsg)->header[0]);
|
||
pkt = (struct packet_header *)(&net_kmsg(new_kmsg)->packet[0]);
|
||
|
||
*eh = eth; /* Is this true ? */
|
||
|
||
if (sc->bus32bit) {
|
||
linl(BASE + EP_W1_RX_PIO_RD_1, (char *)(pkt + 1), totlen/4);
|
||
if (totlen & 3)
|
||
linb(BASE + EP_W1_RX_PIO_RD_1,
|
||
(char *)(pkt + 1) + (totlen & ~3), totlen & 3);
|
||
} else {
|
||
linw(BASE + EP_W1_RX_PIO_RD_1,
|
||
(char *)(pkt + 1),totlen/2);
|
||
if (totlen & 1)
|
||
*((char *)(pkt + 1) + totlen - 1) =
|
||
inb(BASE + EP_W1_RX_PIO_RD_1);
|
||
}
|
||
|
||
outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
|
||
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS)
|
||
;
|
||
++(sc->ds_if.if_ipackets);
|
||
|
||
pkt->type = eh->ether_type;
|
||
pkt->length = totlen + sizeof(struct packet_header);
|
||
|
||
net_packet(&(sc->ds_if), new_kmsg, pkt->length,
|
||
ethernet_priority(new_kmsg, pkt->type));
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpread done ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
return;
|
||
|
||
#else /* MACH_KERNEL */
|
||
m = sc->mb[sc->next_mb];
|
||
sc->mb[sc->next_mb] = 0;
|
||
|
||
if (m == 0) {
|
||
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
||
if (m == 0)
|
||
goto out;
|
||
} else {
|
||
/* Convert one of our saved mbuf's */
|
||
sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
|
||
m->m_data = m->m_pktdat;
|
||
m->m_flags = M_PKTHDR;
|
||
}
|
||
|
||
top = m0 = m; /* We assign top so we can "goto out" */
|
||
#define EROUND ((sizeof(struct ether_header) + 3) & ~3)
|
||
#define EOFF (EROUND - sizeof(struct ether_header))
|
||
m0->m_data += EOFF;
|
||
/* Read what should be the header. */
|
||
insw(BASE + EP_W1_RX_PIO_RD_1,
|
||
mtod(m0, caddr_t), sizeof(struct ether_header) / 2);
|
||
m->m_len = sizeof(struct ether_header);
|
||
totlen -= sizeof(struct ether_header);
|
||
/*
|
||
* mostly deal with trailer here. (untested)
|
||
* We do this in a couple of parts. First we check for a trailer, if
|
||
* we have one we convert the mbuf back to a regular mbuf and set the offset and
|
||
* subtract sizeof(struct ether_header) from the pktlen.
|
||
* After we've read the packet off the interface (all except for the trailer
|
||
* header, we then get a header mbuf, read the trailer into it, and fix up
|
||
* the mbuf pointer chain.
|
||
*/
|
||
eh = mtod(m, struct ether_header *);
|
||
eh->ether_type = etype = ntohs((u_short) eh->ether_type);
|
||
if (etype >= ETHERTYPE_TRAIL &&
|
||
etype < ETHERTYPE_TRAIL + ETHERTYPE_NTRAILER) {
|
||
m->m_data = m->m_dat; /* Convert back to regular mbuf. */
|
||
m->m_flags = 0; /* This sucks but non-trailers are the norm */
|
||
off = (etype - ETHERTYPE_TRAIL) * 512;
|
||
if (off >= ETHERMTU) {
|
||
m_freem(m);
|
||
return; /* sanity */
|
||
}
|
||
totlen -= sizeof(struct ether_header); /* We don't read the trailer */
|
||
m->m_data += 2 * sizeof(u_short); /* Get rid of type & len */
|
||
}
|
||
while (totlen > 0) {
|
||
lenthisone = min(totlen, M_TRAILINGSPACE(m));
|
||
if (lenthisone == 0) { /* no room in this one */
|
||
mcur = m;
|
||
m = sc->mb[sc->next_mb];
|
||
sc->mb[sc->next_mb] = 0;
|
||
if (!m) {
|
||
MGET(m, M_DONTWAIT, MT_DATA);
|
||
if (m == 0)
|
||
goto out;
|
||
} else {
|
||
timeout(zpmbuffill, sc, 0);
|
||
sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
|
||
}
|
||
if (totlen >= MINCLSIZE)
|
||
MCLGET(m, M_DONTWAIT);
|
||
m->m_len = 0;
|
||
mcur->m_next = m;
|
||
lenthisone = min(totlen, M_TRAILINGSPACE(m));
|
||
}
|
||
if (sc->bus32bit) {
|
||
insl(BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len,
|
||
lenthisone / 4);
|
||
m->m_len += (lenthisone & ~3);
|
||
if (lenthisone & 3)
|
||
insb(BASE + EP_W1_RX_PIO_RD_1,
|
||
mtod(m, caddr_t) + m->m_len,
|
||
lenthisone & 3);
|
||
m->m_len += (lenthisone & 3);
|
||
} else {
|
||
insw(BASE + EP_W1_RX_PIO_RD_1, mtod(m, caddr_t) + m->m_len,
|
||
lenthisone / 2);
|
||
m->m_len += lenthisone;
|
||
if (lenthisone & 1)
|
||
*(mtod(m, caddr_t) + m->m_len - 1) = inb(BASE + EP_W1_RX_PIO_RD_1);
|
||
}
|
||
totlen -= lenthisone;
|
||
}
|
||
if (off) {
|
||
top = sc->mb[sc->next_mb];
|
||
sc->mb[sc->next_mb] = 0;
|
||
if (top == 0) {
|
||
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
||
if (top == 0) {
|
||
top = m0;
|
||
goto out;
|
||
}
|
||
} else {
|
||
/* Convert one of our saved mbuf's */
|
||
sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
|
||
top->m_data = top->m_pktdat;
|
||
top->m_flags = M_PKTHDR;
|
||
}
|
||
insw(BASE + EP_W1_RX_PIO_RD_1, mtod(top, caddr_t),
|
||
sizeof(struct ether_header));
|
||
top->m_next = m0;
|
||
top->m_len = sizeof(struct ether_header);
|
||
/* XXX Accomodate for type and len from beginning of trailer */
|
||
top->m_pkthdr.len = save_totlen - (2 * sizeof(u_short));
|
||
} else {
|
||
top = m0;
|
||
top->m_pkthdr.len = save_totlen;
|
||
}
|
||
|
||
top->m_pkthdr.rcvif = &sc->arpcom.ac_if;
|
||
outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
|
||
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS)
|
||
;
|
||
++sc->arpcom.ac_if.if_ipackets;
|
||
#if NBPFILTER > 0
|
||
if (sc->bpf) {
|
||
bpf_mtap(sc->bpf, top);
|
||
|
||
/*
|
||
* Note that the interface cannot be in promiscuous mode if
|
||
* there are no BPF listeners. And if we are in promiscuous
|
||
* mode, we have to check if this packet is really ours.
|
||
*/
|
||
if ((sc->arpcom.ac_if.if_flags & IFF_PROMISC) &&
|
||
(eh->ether_dhost[0] & 1) == 0 &&
|
||
bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr,
|
||
sizeof(eh->ether_dhost)) != 0 &&
|
||
bcmp(eh->ether_dhost, etherbroadcastaddr,
|
||
sizeof(eh->ether_dhost)) != 0) {
|
||
m_freem(top);
|
||
return;
|
||
}
|
||
}
|
||
#endif
|
||
m_adj(top, sizeof(struct ether_header));
|
||
ether_input(&sc->arpcom.ac_if, eh, top);
|
||
return;
|
||
#endif /* MACH_KERNEL */
|
||
|
||
out: outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
|
||
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS)
|
||
;
|
||
#ifndef MACH_KERNEL
|
||
if (top)
|
||
m_freem(top);
|
||
#endif /* MACH_KERNEL */
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpread Error ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
}
|
||
|
||
|
||
#ifdef MACH_KERNEL
|
||
|
||
int zpgetstat(dev, flavor, status, count)
|
||
dev_t dev;
|
||
int flavor;
|
||
dev_status_t status;
|
||
unsigned int *count;
|
||
{
|
||
register int unit = minor(dev);
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpgetstat ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
if (unit < 0 || unit >= NZP || zp_softc[unit].attached == 0) {
|
||
return (ENXIO);
|
||
}
|
||
return (net_getstat(&zp_softc[unit].ds_if,flavor,status,count));
|
||
}
|
||
|
||
int zpsetstat(dev, flavor, status, count)
|
||
dev_t dev;
|
||
int flavor;
|
||
dev_status_t status;
|
||
unsigned int count;
|
||
{
|
||
register int unit = minor(dev);
|
||
register zp_softc_t *sc;
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpsetstat ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
if (unit < 0 || unit >= NZP || zp_softc[unit].attached == 0) {
|
||
return (ENXIO);
|
||
}
|
||
|
||
sc = &zp_softc[unit];
|
||
|
||
switch (flavor) {
|
||
case NET_STATUS:
|
||
{
|
||
register struct net_status *ns =
|
||
(struct net_status *)status;
|
||
|
||
if (count < NET_STATUS_COUNT) {
|
||
return (D_INVALID_SIZE);
|
||
}
|
||
if (sc->ds_if.if_flags != ns->flags) {
|
||
sc->ds_if.if_flags = ns->flags;
|
||
if (sc->ds_if.if_flags & IFF_RUNNING) {
|
||
zpinit(sc->ds_if.if_unit);
|
||
}
|
||
}
|
||
}
|
||
break;
|
||
default:
|
||
return (D_INVALID_OPERATION);
|
||
}
|
||
return (D_SUCCESS);
|
||
}
|
||
|
||
#else /* MACH_KERNEL */
|
||
|
||
/*
|
||
* Look familiar?
|
||
*/
|
||
static int
|
||
zpioctl(ifp, cmd, data)
|
||
register struct ifnet *ifp;
|
||
int cmd;
|
||
caddr_t data;
|
||
{
|
||
register struct ifaddr *ifa = (struct ifaddr *) data;
|
||
struct zp_softc *sc = &zp_softc[ifp->if_unit];
|
||
struct ifreq *ifr = (struct ifreq *) data;
|
||
int s, error = 0;
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpioctl ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
switch (cmd) {
|
||
case SIOCSIFADDR:
|
||
ifp->if_flags |= IFF_UP;
|
||
switch (ifa->ifa_addr->sa_family) {
|
||
#ifdef INET
|
||
case AF_INET:
|
||
zpinit(ifp->if_unit); /* before arpwhohas */
|
||
#if 1
|
||
arp_ifinit((struct arpcom *)ifp, ifa);
|
||
#else
|
||
((struct arpcom *) ifp)->ac_ipaddr = IA_SIN(ifa)->sin_addr;
|
||
arpwhohas((struct arpcom *) ifp, &IA_SIN(ifa)->sin_addr);
|
||
#endif
|
||
break;
|
||
#endif
|
||
#ifdef NS
|
||
case AF_NS:
|
||
{
|
||
register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr);
|
||
|
||
if (ns_nullhost(*ina))
|
||
ina->x_host =
|
||
*(union ns_host *)(sc->arpcom.ac_enaddr);
|
||
else {
|
||
ifp->if_flags &= ~IFF_RUNNING;
|
||
bcopy((caddr_t) ina->x_host.c_host,
|
||
(caddr_t)sc->arpcom.ac_enaddr,
|
||
sizeof(sc->arpcom.ac_enaddr));
|
||
}
|
||
zpinit(ifp->if_unit);
|
||
break;
|
||
}
|
||
#endif
|
||
default:
|
||
zpinit(ifp->if_unit);
|
||
break;
|
||
}
|
||
break;
|
||
case SIOCSIFFLAGS:
|
||
if ((ifp->if_flags & IFF_UP) == 0 && ifp->if_flags & IFF_RUNNING) {
|
||
ifp->if_flags &= ~IFF_RUNNING;
|
||
zpstop(ifp->if_unit);
|
||
zpmbufempty(sc);
|
||
break;
|
||
}
|
||
if (ifp->if_flags & IFF_UP && (ifp->if_flags & IFF_RUNNING) == 0)
|
||
zpinit(ifp->if_unit);
|
||
break;
|
||
#ifdef notdef
|
||
case SIOCGHWADDR:
|
||
bcopy((caddr_t) sc->sc_addr, (caddr_t) &ifr->ifr_data,
|
||
sizeof(sc->sc_addr));
|
||
break;
|
||
#endif
|
||
default:
|
||
error = EINVAL;
|
||
}
|
||
return (error);
|
||
}
|
||
|
||
#endif /* MACH_KERNEL */
|
||
|
||
void
|
||
zpreset(unit)
|
||
int unit;
|
||
{
|
||
int s = splimp();
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpreset ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
zpstop(unit);
|
||
zpinit(unit);
|
||
splx(s);
|
||
}
|
||
|
||
void
|
||
zpwatchdog(unit)
|
||
int unit;
|
||
{
|
||
struct zp_softc *sc = &zp_softc[unit];
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpwatchdog ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
#ifdef MACH_KERNEL
|
||
++sc->ds_if.if_oerrors;
|
||
#else /* MACH_KERNEL */
|
||
log(LOG_ERR, "zp%d: watchdog\n", unit);
|
||
++sc->arpcom.ac_if.if_oerrors;
|
||
#endif /* MACH_KERNEL */
|
||
zpreset(unit);
|
||
}
|
||
|
||
void
|
||
zpstop(unit)
|
||
int unit;
|
||
{
|
||
struct zp_softc *sc = &zp_softc[unit];
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpstop ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
outw(BASE + EP_COMMAND, RX_DISABLE);
|
||
outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
|
||
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS)
|
||
;
|
||
outw(BASE + EP_COMMAND, TX_DISABLE);
|
||
outw(BASE + EP_COMMAND, STOP_TRANSCEIVER);
|
||
outw(BASE + EP_COMMAND, RX_RESET);
|
||
outw(BASE + EP_COMMAND, TX_RESET);
|
||
outw(BASE + EP_COMMAND, C_INTR_LATCH);
|
||
outw(BASE + EP_COMMAND, SET_RD_0_MASK);
|
||
outw(BASE + EP_COMMAND, SET_INTR_MASK);
|
||
outw(BASE + EP_COMMAND, SET_RX_FILTER);
|
||
}
|
||
|
||
|
||
/*
|
||
* This is adapted straight from the book. There's probably a better way.
|
||
*/
|
||
static int
|
||
send_ID_sequence(port)
|
||
u_short port;
|
||
{
|
||
char cx, al;
|
||
|
||
#ifdef ZP_DEBUG2
|
||
printf("### send_ID_sequence ####\n");
|
||
#ifdef MACH_KERNEL
|
||
cngetc();
|
||
#endif /* MACH_KERNEL */
|
||
#endif /* ZP_DEBUG */
|
||
|
||
cx = 0x0ff;
|
||
al = 0x0ff;
|
||
|
||
outb(port, 0x0);
|
||
DELAY(1000);
|
||
outb(port, 0x0);
|
||
DELAY(1000);
|
||
|
||
loop1: cx--;
|
||
outb(port, al);
|
||
if (!(al & 0x80)) {
|
||
al = al << 1;
|
||
goto loop1;
|
||
}
|
||
al = al << 1;
|
||
al ^= 0xcf;
|
||
if (cx)
|
||
goto loop1;
|
||
|
||
return(1);
|
||
}
|
||
|
||
|
||
/*
|
||
* We get eeprom data from the id_port given an offset into the
|
||
* eeprom. Basically; after the ID_sequence is sent to all of
|
||
* the cards; they enter the ID_CMD state where they will accept
|
||
* command requests. 0x80-0xbf loads the eeprom data. We then
|
||
* read the port 16 times and with every read; the cards check
|
||
* for contention (ie: if one card writes a 0 bit and another
|
||
* writes a 1 bit then the host sees a 0. At the end of the cycle;
|
||
* each card compares the data on the bus; if there is a difference
|
||
* then that card goes into ID_WAIT state again). In the meantime;
|
||
* one bit of data is returned in the AX register which is conveniently
|
||
* returned to us by inb(). Hence; we read 16 times getting one
|
||
* bit of data with each read.
|
||
*/
|
||
static u_short
|
||
get_eeprom_data(id_port, offset)
|
||
int id_port;
|
||
int offset;
|
||
{
|
||
int i, data = 0;
|
||
|
||
#ifdef ZP_DEBUG2
|
||
printf("### get_eeprom_data ####\n");
|
||
#ifdef MACH_KERNEL
|
||
cngetc();
|
||
#endif /* MACH_KERNEL */
|
||
#endif /* ZP_DEBUG */
|
||
|
||
outb(id_port, 0x80 + offset);
|
||
DELAY(1000);
|
||
for (i = 0; i < 16; i++)
|
||
data = (data << 1) | (inw(id_port) & 1);
|
||
return (data);
|
||
}
|
||
|
||
|
||
static u_short
|
||
read_eeprom_data(id_port, offset)
|
||
int id_port;
|
||
int offset;
|
||
{
|
||
int i, data = 0;
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### read_eeprom_data ####\n");
|
||
#ifdef MACH_KERNEL
|
||
cngetc();
|
||
#endif /* MACH_KERNEL */
|
||
#endif /* ZP_DEBUG */
|
||
|
||
outb(id_port + 10, 0x80 + offset);
|
||
DELAY(1000);
|
||
return inw(id_port + 12);
|
||
}
|
||
|
||
|
||
|
||
static int
|
||
#ifdef MACH_KERNEL
|
||
f_is_eeprom_busy(dev)
|
||
struct bus_device *dev;
|
||
#else /* MACH_KERNEL */
|
||
f_is_eeprom_busy(is)
|
||
struct isa_device *is;
|
||
#endif /* MACH_KERNEL */
|
||
{
|
||
int i = 0, j;
|
||
#ifdef MACH_KERNEL
|
||
register struct zp_softc *sc = &zp_softc[dev->unit];
|
||
#else /* MACH_KERNEL */
|
||
register struct zp_softc *sc = &zp_softc[is->id_unit];
|
||
#endif /* MACH_KERNEL */
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### f_is_eeprom_busy ####\n");
|
||
printf("BASE: %x\n", BASE);
|
||
#ifdef MACH_KERNEL
|
||
cngetc();
|
||
#endif /* MACH_KERNEL */
|
||
#endif /* ZP_DEBUG */
|
||
|
||
while (i++ < 100) {
|
||
j = inw(BASE + EP_W0_EEPROM_COMMAND);
|
||
if (j & EEPROM_BUSY)
|
||
DELAY(100);
|
||
else
|
||
break;
|
||
}
|
||
if (i >= 100) {
|
||
#ifdef MACH_KERNEL
|
||
printf("\nzp%d: eeprom failed to come ready.\n", dev->unit);
|
||
#else /* MACH_KERNEL */
|
||
printf("\nzp%d: eeprom failed to come ready.\n", is->id_unit);
|
||
#endif /* MACH_KERNEL */
|
||
return (1);
|
||
}
|
||
if (j & EEPROM_TST_MODE) {
|
||
#ifdef MACH_KERNEL
|
||
printf("\nzp%d: 3c589 in test mode. Erase pencil mark!\n", dev->unit);
|
||
#else /* MACH_KERNEL */
|
||
printf("\nzp%d: 3c589 in test mode. Erase pencil mark!\n", is->id_unit);
|
||
#endif /* MACH_KERNEL */
|
||
|
||
return (1);
|
||
}
|
||
return (0);
|
||
}
|
||
|
||
#ifndef MACH_KERNEL
|
||
void
|
||
zpmbuffill(sp)
|
||
void *sp;
|
||
{
|
||
struct zp_softc *sc = (struct zp_softc *)sp;
|
||
int s, i;
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpmbuffill ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
s = splimp();
|
||
i = sc->last_mb;
|
||
do {
|
||
if(sc->mb[i] == NULL)
|
||
MGET(sc->mb[i], M_DONTWAIT, MT_DATA);
|
||
if(sc->mb[i] == NULL)
|
||
break;
|
||
i = (i + 1) % MAX_MBS;
|
||
} while (i != sc->next_mb);
|
||
sc->last_mb = i;
|
||
splx(s);
|
||
}
|
||
|
||
static void
|
||
zpmbufempty(sc)
|
||
struct zp_softc *sc;
|
||
{
|
||
int s, i;
|
||
|
||
#ifdef ZP_DEBUG
|
||
printf("### zpmbufempty ####\n");
|
||
#endif /* ZP_DEBUG */
|
||
|
||
s = splimp();
|
||
for (i = 0; i<MAX_MBS; i++) {
|
||
if (sc->mb[i]) {
|
||
m_freem(sc->mb[i]);
|
||
sc->mb[i] = NULL;
|
||
}
|
||
}
|
||
sc->last_mb = sc->next_mb = 0;
|
||
untimeout(zpmbuffill, sc);
|
||
splx(s);
|
||
}
|
||
|
||
#endif /* MACH_KERNEL */
|
||
|
||
#endif /* NZP > 0 */
|